Lumina 925 does not recieve first incoming call at...

This is rather puzzling. I am experiencing a problem where my Lumina 925 will not recieve an incoming call on the first try. I get no ring and the caller goes straight to voice mail. If they ring back, I recieve the call. While this is a pretty great feature for avoiding telemarketing I find it a bit frustrating.
Does anyone else have this problem?
Auto updates are on.
WP8 ver. 8.0.10328.78
Firmware rev. 3047.0000.1326.2005

I was hoping that it was the sim. I switched to a new carrier today, inserted the new sim and the behavior was the same. . . Hoping not to have to reset the phone since it is set up just the way I want it but may have to do it anyway if I cannot find a way to solve the problem.

Similar Messages

TS2634 My iPhone 4s does not ring for incoming calls. Ring tone is set/settings/sound. It used to ring. I think it has to do with updating to IOS 7.0.4? After updating IOS 7.0.3 my microphone stopped working. Had to clear/reload.

My iPhone 4s does not ring for incoming calls. Ring tone set and used to ring. I think it has something to do with updating the IOS 7.0.4. When I updated to 7.0.3 the microphone stopped working. Had to call Apple Support and cleared phone and reloaded. ($57 charge). Any suggestions?

Start with your finger at the bottom of the screen (about even with the home button) and swipe in an upward motion. There should be a row of icons at the top of a grey field. if the quarter-moon icon is bright white, tap it. If it was (and still is) dark, take the iPhone in to be evaluated by a qualified technician.

My i4s phone does not ring on incoming calls. The settings appear to be correct

My i4s phone does not ring on incoming calls. The settings appear to be correct for the phone to ring.
Also, during a call, when I hit the speaker buttom, I can neither hear nor be heard by the other party
Any suggestions?

Try a factory restore, this might be a software problem so just plug into itunes and go and click the restore button. If this doesnt fix it then its a hardware problem meaning you need to head to an apple store for a replacement.

HT4515 phone does not ring during incomming call

phone does not ring during incomming call

Is the phone silenced? Check the button on the side of the phone above the volume buttons if you see an orange line it is silienced, slide it to the front of the phone and it should correct this. Also ensure the volume is up. If you've checked these and still nothing are you able to call people? do you have service?

I have installed a ringtone but phone does not ring on incoming calls

I Have an Iphone 4S, it came with vibration set as default ringtone, I changed the ringtone but the phone does not ring on incoming calls, What is wrong?

Also, you may want to do a reboot, hold both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appers, so that everything is reset.

IOs 5.0.1. - Iphone4 does not respond to incoming calls

Hi, everyone!
I have a problem with my Iphone 4, 16Gb, iOs 5.0.1
After the update from 5.0 to 5.0.1 my Iphone4 does not respond to incoming calls, they do not even appear on the screen.
I also can not cancel my outgoing call - the phone freezes. The only thing that helped me - settings reset, but two days later this problem appeared again.
How to solve the problem?

The problem arose after updating iOs through wifi.
After restoring the firmware via a standard way through Itunes - Iphone started to work without any problems.

Iphone 4 does not ring on incoming calls

It rang and vibrated on incoming calls it still vibrates but no ring, I don't think changed anything but im still exploring.

I have the same issue, the phone does not ring on incoming calls, moreover, when changing the tone I can't hear the new tone, and when I press the keys on the
keyboard I can't hear the clicks, if I use the headphone I can hear everything.
I checked the silent switch, it is not silent, and I restrat the phone, no help.
I have this issue immediatly after purchase and unbox
the phone is updated to 4.3.3
note: I use the same computer to sync to ipad.

Phone does not ring on incoming calls

Hi,
I hope someone can help or advise on my issue - see points 3 and 4.
1. Tested with 2 analogue phones - 1 phone definetley known to be working at a separate location - and a mobile phone.
2. All tests conducted twice - at master socket and internal test socket/ ALL other extensions& broadband line connections removed during testing.
3. Incoming calls do not ring on the analogue phones, but calls can be answered if analogue phone is picked up.
4. When hanging up on an incoming call, the analogue phones do not kill the open line. I have to terminate the call on the mobile as well.
5. Outgoing calls can be made and picked up by mobile with no issues.
6. Online BT Line Check reports no faults on the line.
7. Both analogue phones were checked to make sure they are not in silent mode.
Anyone have any ideas or suggestions?
Thanks
Ben

I had this problem recently - caused by a fault in the BT line box just outside the house.
3. If you ring your number from a mobile do you hear the phone ringing in the mobile? I my case there was just a short ring heard in the mobile and then silence - picking up analogue phone you could then talk to mobile.
3. This is normal. Reverse cleardown takes some time - I think it is about 10 mins. I often use this feature when I pick up a call on one phone and want to move to another extension. I just replace the first phone, so no phones are connected, then go to the other extension and pick up the call.
Peter

Phone can dial out but does not ring on incoming calls

We have a strange problem with a 7961G phone. It's configured the same as all of our other phones in CMM, but it can dial out but when dialing in the phone does not ring nor does the call appear to be routed to the phone. I called out from the phone to my cell and it displays the correct Caller ID information. Any ideas???

I would check the partition that the DN on the called phone is in and the CSS of the calling phone. These are the two fundamental principles that control when a phone can call another phone.
You might want to change the partition of the called DN to momentarily, to see that the calling phone can call it. All phones can call the partition unless there are explicit blocks put in place.

Do not disturb does not block any incoming calls. Has anyone else had this problem how do you fix it

I Would really like to use this feature. But everytime I activate do not disturb I still receive calls and I am still disturbed.
Any help would be appreciated, thank you.

If you update to iOS 7.0, DND works both while your phone is locked, & when not locked. On iOS 6.0, only works when your phone is locked.
You have to go into settings and choose which you want. Always or only when locked. If you choose only when locked if you ar using your phone for anything, even it if is just sitting on a home page with the screen unlocked DND won't stop a call from coming through.

IPhone5 does not mute the incoming call when the earbuds are plugged in

How come? I expected the phone calls to ring in the earbuds, not in the phone itself. How do I set up the phone so when I have the earbuds plugged in the phone doesn't ring in the middle of a meeting.

I have this exact problem, have you had any luck solving it Louise? I see that no one has replied so I was wondering if you ever solved the problem. If you did can you please respond back with what worked for you?

IPhone 4 does not ring for incoming calls

I got the iPhone 4 two days ago, and I noticed that when someone calls me, the phone will vibrate, but it will not ring. The volume on the ringer is set to the highest level. I downloaded an update for the phone 2 days ago. What can I do to get my phone to ring? Do you think the update had anything to do with the problem?
Thank you in advance for your help!

Hello Dracheskind,
Have you corrected the issue with the ringtone volume? If not, make sure the Ring/Silent button above the volume keys is turned on (if off, orange sticker will appear). Then go to settings > sounds > Ringer and Alerts > change the volume to loud. The vibrate options can stay on. If all of these settings are enabled, try changing the ringtone.
For additional assistance, go to http://www.apple.com/support/iphone/
Thank you,

Phone does not ring with incoming call

My iPhone 4 is not ringing -- and it's not set to silent or vibrate. I believe this may be a cell reception problem as sometimes my voicemail isn't available either. I tried turning the **** thing off and restarting it but that didn't help. I am ready to ditch the iPhone, which I love, because of its poor reception capabilities. Any other ideas out there? Help!

That would be fine, razmee, but my carrier AT&T says it is doing the best it can do. I am in a rural area and 1 mi away from 3G service. Sometimes my reception is ok and sometimes not. In the meantime I am trying to find a work-around as I am not sure if 1: the problem is caused by poor service and 2: if it is, are there any solutions.

I did the latest update and now my contact info does not show on incoming calls or text

can anyone assist?

Try to restore your iphone via iTunes or update to ios6.1.2.
If itunes gives an error with restoring (DFU/Recovery or just normal)
try this:
open your computer and search on windows; C://windows/system32/drivers/etc/hosts
open up the hosts file in note pad you will see IP adresses and more add another line and put in this:
#74.208.10.249 gs.apple.com
this is a by-pass to the cydia/saurik restore server, it has nothing to do with jailbreaking over voiding apple's warranty
let me know if succeeded!

HT201401 my phone only vibrates and will not ring on incoming calls. How do I fix this?

My phone only vibrates and does not ring on incoming calls. How do I get the audible ring? John

on left side of your phone you have volume controll an right above that is a small button an if you see a orange or red dot you are in silent mode flip the switch up an it will remove silent .

Lumina 925 does not recieve first incoming call at...

Similar Messages

Maybe you are looking for