Lumira Server - Authentication Issues

Hi all!
I just finished installing Lumira Server 1.15, following through all the config steps (http://server:port/sap/hana/xs/sqlcc/) and logging on with a user that has the sap.bi.common::BI_DATA_ANALYST role I get a list of all views that are deployed in HANA, but I cannot open a single one - the only icon I get is the "Info" icon...
I also followed all steps described in SAPNote 1823771.
What am I missing here? Thanks!
BTW, we're running on HANA Rev 73.

Thanks Henry - this helps...
...however, if I look at section 2.3.2 of the Lumira Server User Guide (http://help.sap.com/businessobject/product_guides/vi01/en/lumS115_user_en.pdf), I don't all the icons and options mentioned there "share", "info", "delete" - I only get info, even if I access a data set that I own. So I am still confused with respect to what the benefit of SP15 is (and when to expect an enhanced version/new SP)?
Also, when I try to publish a story from Lumira or Predictive Analysis to Lumira Server I do get the following error message:
The requested operation has failed because the session on SAP Lumira™ Server appears to be invalid. (HDB 11024)
Thanks again,
Christian

Similar Messages

  • IMac connected to a Windows 2003 Server: Authentication Issue

    Hi. I was wondering if anyone in the community might have found a solution for this problem or could offer suggestions.
    In our in-house corporate graphics department we are connecting three recently purchased iMacs to a Windows Server 2003 file server. We copy files over to the network to share with one another and for backup purposes. Everything was working fine until...the IT guys upgraded to new file server hardware and installed Windows Server 2003 onto it (they claim it's the exact same version of the Server OS as was used before). Now the iMacs cannot copy files to the network drive. The system displays a message that we do not have sufficient permission to change "folder name". I have checked "Get Info" on the file and/or folder and I'm not listed as someone having access to the item. I add myself but my name does not show up in the list. The exact same problem is occurring with all three iMacs. We can log-on to the iMac just fine--connecting to our corporate user account stored on the server (we're not logging on to a local account). All of our user accounts allow us to administer the iMacs. The PowerMac G5s in our department are unaffected by this glitch. This leads us to believe it's some combination between the Windows Server software and the iMacs. Any one have any ideas? Our IT guys don't know Macs. They are trying, but not making any progress. Any help you can offer is greatly appreciated. Thanks!! Greg

    Hi BH. Here's our IT Manager's response:
    "Greg,
    I hear the change worked. This is an issue because what I essentially did was give you access to change permissions on the file server. What that tells me is that your Mac wants to copy it’s local permissions to the file server. That is a bit of an issue. Since Zach was able to copy over files under his login I have a feeling that you may have set a security setting on under your user profile that tell the OS to copy it’s local permissions to the SMB server. Can you think of anything along those lines that may be set? Did you alter the local permission on your folders in any way? I double checked the old file server had the same exact settings as the new file server up until just now."
    Once the permissions issue arose (the morning after they installed the new Server) I selected my network folder and checked the permission settings under "Get Info." I did not see my name as someone having access to the folder so I attempted to add myself, but my name never appeared in the list. Do you think my attempt to add myself created the issue described above? They keep assuring me that the server settings are exactly the same on the new server as the old one. I have no choice but to take their word that they have checked everything that could be a variable on the two servers because I can't check myself.
    Does the IT manager's response spark any ideas?
    Thanks for your time and thoughts on this issue.

  • Connect to server authentication issues

    Hello,
    My company just moved to 10.7, and it used to be the case in 10.6 if I needed to connect to a server I could use user@servername if I wanted to authenticate as another user. It seems in 10.7 and 10.8 it is automatically using my currently logged in user only and it just ignores anything specified in user@. I can't find anything conclusive in Keychain Access, and it persist over mutliple machines so it's not my specific computer or user that has issues.
    We are on an AD domain and this is happening over SMB and AFP.
    thanks!

    It's not even listed in the keychain access list. I tried to manually input it, but still to no avail. When I say I click somewhere else I mean I might click on my documents for example to drag something into the ftp server, but when i come back to the ftp it's just kind of stuck saying "connecting" and trying to reconnect does nothing but give me an error and trying to eject does nothing at all.

  • Timestamp server authentication issues

    I'm using Adobe Reader XI and when using http timeStamp server that requires basic authentication is always tried without the needed BasicAuth field set.
    That's the request adobe send
    POST /cdie/HttpService HTTP/1.1
    accept: */*
    content-type: application/timestamp-query
    content-length: 69
    character-encoding: binary
    user-agent: PPKHandler
    connection: Keep-Alive
    cache-control: no-cache
    The reply is a simply HTTP/1.1 401 Unauthorized because the request hasn't the authentication field.
    I've tried using Windows and Macintosh
    Why didn't send the basic authentication?

    What exactly are you trying to do? Are you signing a PDF with a certificate-based digital signature? You cannot sign in Adobe Reader unless your PDF is Reader-extended with permissions to sign.
    If your PDF is Reader-extended or you're signing with Acrobat Pro, and you want your signature to be timestamped you need to set up the timestamp server in Acrobat/Reader. If your timestamp server requires authentication, you need to provide authentication information in the Acrobat's timestamp server setup. Some signing credentials (Digital IDs) have timestamp server information embedded in the certificate. In this case Acrobat will use this timestamp server to timestamp the signature and you do not need to set up this timestamp in Acrobat's timestamp servers list unless this timestamp server requires authentication. If it requires authentication, you need to set it up in Acrobat/Reader providing authentication info.
    You should never access timestamp server if you just open a signed PDF.

  • How to Create a SQL Agent Job For A SSIS Package with Sql Server Authentication

    Hi ALl,
    I have a SSIS package which basically has a data flow task in which i pull the data from one server and copy it into another server and my source server is the one where i dont have windows authentication and i have to only use a sql server authentication
    . This package runs fine if i click the server connection properties type the password and save it.
    Now, my task is to set up a sql agent job which basically uses a proxy account and takes this package from the file system and runs it.But when i try to run this package, its failing with an error saying 
    "Login Failed For rpt5user" where rpt5user is the username for my sql server authentication of the source connection.
    Can someone please help me with any suggestions on how to do this?
    I have heard that we can achieve it by using xml config file which i have never used and i am trying to google around but for no luck.
    So, If someone can please throw any suggestions or ideas on this it would be great.
    Thanks

    You need to add password as a config item and set it from the file source or sql table
    see this as an example
    http://blogs.msdn.com/b/runeetv/archive/2009/12/22/ssis-package-using-sql-authentication-and-dontsavesensitive-as-protectionlevel.aspx
    Please Mark This As Answer if it solved your issue
    Please Mark This As Helpful if it helps to solve your issue
    Visakh
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Trying to configure a Win 2003 Server to use TLS server authentication . . .

    I am trying to
    configure a Win 2003 Server to use TLS server authentication following Method 2 in KB 895443 - see below:-
    Method 2: By using the Certificate Request Wizard
    The following steps describe how to obtain a certificate from a Windows Server 2003 Certification Authority. You can also request a certificate from a Windows 2000
    Certification Authority. Additionally, you must have Read permissions and Enroll permissions on the certificate template file to successfully request a certificate. Use this method if one or more of the following conditions are true:
    You want to request a certificate from an Enterprise Certification Authority.
    You want to request a certificate that is based on a template where the subject name is generated by Windows.
    You want to obtain a certificate that does not require administrator approval before the certificate is issued.
    To obtain a certificate, follow these steps:
    Click Start, click Run, type mmc, and then click OK.
    On the File menu, click Add/Remove Snap-in.
    Click Add, click Certificates, and then click Add.
    Click Computer account, and then click Next.
    If you want to add a certificate to the local computer, click Local computer. If you want to add a certificate to a remote computer, click Another
    computer, and then type the name of that remote computer in the Another computer box.
    Click Finish.
    In the Add Standalone Snap-in dialog box, click Close, and then click OK in the Add/Remove
    Snap-in dialog box.
    Under Console Root, click Certificates (Local Computer).
    Note If you configured the Certificates MMC snap-in to manage a remote computer, click Certificates (servername)instead of Certificates (Local Computer).
    On the View menu, click Options.
    In the View Options dialog box, click Certificate purpose, and then click OK.
    In the right pane, right-click Server Authentication, point to All Tasks, and then click Request New Certificate.
    In the Certificate Request Wizard that starts, click Next.
    In the Certificate types list, click Server Authentication, click to select the Advanced check box,
    and then click Next.
    In the Cryptographic Service Providers list, click Microsoft RSA SChannel Cryptographic Provider.
    I get as far as step 11 and I get the error message:-
    The wizard cannot be started because of one or more of the following conditions:
    - There are no trusted certification authorities (CAs) available.
    - You do not have the permissions to request certificates from the available CAs.
    - The available CAs issue certificates for which you do not have permissions.
    This is covered in KB 927066 – see below:-
    To resolve the problem, follow these steps:
    Verify that the CERTSVC_DCOM_ACCESS group exists in the domain that hosts the certification authority. This group is in the CN=Users container.
    To do this, follow these steps:
    Click Start, click Run,
    type Dsa.msc, and then click OK.
    In the left pane, click the Users container.
    Verify that the CERTSVC_DCOM_ACCESS group is in the right
    pane. If the CERTSVC_DCOM_ACCESS group is not in the right pane, go to step 4.
    Verify that the CERTSVC_DCOM_ACCESS group includes the following member groups:
    Domain Users
    Domain Computers
    If these member groups do not exist in the CERTSVC_DCOM_ACCESS group, go to step 4. 
    Note If users or computers in other domains need to enroll against the certification authority, you must also add those users and computers to the CERTSVC_DCOM_ACCESS group. If the current problem occurs on a domain
    controller, you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group. By default, domain controllers are not members of the Domain Computers global group. Therefore, domain controllers
    do not have sufficient DCOM permissions.
    Verify that the CERTSVC_DCOM_ACCESS group has the appropriate DCOM Access permissions and DCOM Launch and Activation permissions on the computer that hosts the certification
    authority.
    Click Start, point to Program,
    point to Administrative Tools, and then click Component Services.
    Expand the Component Services node.
    Expand the Computers node.
    Right-click the My Computer node, and
    then click Properties.
    Click the COM Security tab.
    Under Access Permission, click Edit
    Limits.
    Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Access and Allow
    Remote Access permissions, and then click Cancel.
    Under Launch and Activation Permissions, click Edit
    Limits.
    Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Activation and Allow
    Remote Activationpermissions, and then click Cancel.
    Click Cancel, and then close the Component
    Services console.
    Settings may be incorrect if any one of the following conditions is true:
    The CERTSVC_DCOM_ACCESS group does not exist.
    The default membership of the CERTSVC_DCOM_ACCESS group is incorrect.
    The CERTSVC_DCOM_ACCESS group does not have the correct permissions.
    If any one setting is incorrect, run the following commands at a command prompt. Press ENTER after each command.
    certutil -setreg SetupStatus -SETUP_DCOM_SECURITY_UPDATED_FLAG
    net stop certsvc
    net start certsvc
    Repeat steps 1 through 3 to verify that all the settings are correct.
    Note If the changes affect the group membership of the certification authority server, you must restart the server for the changes to take effect.
    The only part of the above instructions which I have not been able to complete is:-
    “you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group”.
    When I click on the CERTSVC_DCOM_ACCESS user then click the Members tab & go to add Enterprise Domain Controllers the option is not there.

    Hi Nick,
    Have you successfully set up an enterprise CA?
    If yes, is the enterprise CA’s certificate located under the Trusted Root Certification Authorities store?
    Best Regards,
    Amy

  • Publish Dataset and history in sap lumira server

    Hi Experts
    I'm trying to publish a dataset and story from the sap Lumira desktop to Lumira  server.
    Tools used
    SAP HANA DATABASE REV.80 INSTANCIA EN WINDOWS AZURE
    SAP LUMIRA DESTOP V1.18
    SAP LUMIRA SERVER V1.18
    The process I followed is as follows:
    1. Create Users:
    CONFIG: Assign the role sap.bi.admin :: BI_CONFIGURATOR. Some other role or privilege required?
    TECNICO: Assign the role sap.bi.common :: BI_TECH_USER. Some other role or privilege required?
    ANALISTA: Assign the role sap.bi.common :: BI_DATA_ANALYST. This user is the one that has the role to publish in Lumira sap server. Some other role or privilege required?
    2. Entry to http: // <HOSTNAME> 80 <INSTANCE> / sap / hana / xs / FormLogin /
    I sign in with  the password created in hana studio  for each user and then make the change the password of each user CONFIG - TECNICO – ANALISTA
    3. Entry to http://<HOSTNAME>:80<INSTANCE>/sap/bi/launchpad/fiori
    I sign in with the  user CONFIG and in the catalag administration of sap Lumira server income in the field Enter technical  user TECNICO, so I confirm the sql connection.
    4. Entry to http: // <HOSTNAME> 80 <INSTANCE> / sap / hana / xs / admin
    I sign in with the user CONFIG sap.bi.launchpad.logic.v2 following path of the package and confirm that the sql connection is for the user TECNICO
    5. Entry to Sap lumira Desktop, sign in with the user ANALISTA to access the dataset, I create visualization and history, the last step is to publish the dataset and story in SAP Lumira server, for this I sign in with the user ANALISTA but when I clic on the button PUBLISH IN SAP LUMIRA SERVER is show me this error:
    Error - The dataset could not be published to SAP Lumira Server because publishing to the SAP HANA layer failed.  Reason is ''. (HDB 11009)
    I searched many blogs of sap and tested with the following options but None of the above helped me to solve the problem.
    http://scn.sap.com/community/lumira/blog/2014/06/10/how-to-install-sap-lumira-server
    http://scn.sap.com/community/lumira/blog/2014/06/21/sap-lumira-server-on-hana--part-2
    http://scn.sap.com/thread/3532168
    http://www.saptechies.com/access-privileges-required-sap-lumira-from-sap-hana/
    http://scn.sap.com/thread/3523762
    http://scn.sap.com/community/lumira/blog/2014/06/16/sap-lumira-server-sap-fiori-launchpad-integration
    http://www.saptechies.com/security-settings-run-lumira-hana-online-shl-views/
    http://scn.sap.com/community/lumira/blog/2014/06/16/sap-lumira-server-post-install-configuration
    6. Another issue is when I access to Lumira server  http: // <HOSTNAME> 80 <INSTANCE> / sap / bi / launchpad / and I sign in with the user ANALISTA, I find a number of the dataset in lumira server but when I run  any for create a compose can not access   hana dataset.
    Shows me the following error
    Please help me with this issues
    Thanks

    Hi John,
    I also forwarded the incident to SAP and as suggested by SAP, after assigning sap.hana.xs.lm.roles::Administrator  my issue was resolved.
    Regards,
    Abhijit

  • Error Publishing Storyboard to Lumira Server

    We recently installed Lumira Server. When trying to publish a storyboard created from Excel data to Server, we get the following error: " The data could not be inserted into the calculation engine (HDB 10002)".
    We've followed the instructions in http://help.sap.com/businessobject/product_guides/vi01/en/lumS115_user_en.pdf.
    Also, The user has both the sap.bi.common::BI_DATA_ANALYST and MODELING roles granted.
    Has anyone else run into this issue and been able to fix it?

    Kelly,
    there are a couple of notes - could you check this one :
    https://service.sap.com/sap/support/notes/1995325

  • Sharing stories on Lumira Server

    Hello,
    I am getting the following error when trying to share my story to SAP Lumira Server:
    The dataset could not be published to SAP Lumira™ Server because publishing to the SAP HANA layer failed. Reason is '<Not available>'. (HDB 11009)
    The tracelog shows the following
    The dataset could not be published to SAP Lumira™ Server because publishing to the SAP HANA layer failed. Reason is '<Not available>'. (HDB 11009)
      at com.sap.hilo.platform.viweb.internal.VIWebPublisher.getPackageNameFromServer(VIWebPublisher.java:432)
      at com.sap.hilo.platform.viweb.internal.VIWebPublisher.getViewPackageName(VIWebPublisher.java:449)
      at com.sap.hilo.platform.viweb.internal.VIWebPublisher.publishDataSet(VIWebPublisher.java:504)
      at com.sap.hilo.platform.viweb.internal.VIWebPublisher.publishDataSet(VIWebPublisher.java:92)
      at com.sap.hilo.platform.viweb.internal.VIWebDashboardPublisher.publishDataSet(VIWebDashboardPublisher.java:119)
      at com.sap.hilo.platform.viweb.internal.VIWebDashboardPublisher.publishDataSet(VIWebDashboardPublisher.java:1)
      at com.sap.hilo.platform.common.base.ShareCommonDashboardPublishingLogic.publish(ShareCommonDashboardPublishingLogic.java:152)
      at com.sap.hilo.platform.viweb.internal.VIWebDashboardPublisher.publishDashboard(VIWebDashboardPublisher.java:290)
      at com.sap.hilo.service.infrastructure.publication.internal.PublicationServiceImpl.publishDashboard(PublicationServiceImpl.java:135)
      at com.sap.hilo.desktop.share.v2.common.service.PublishDashboard$PublishDashboardTask.run(PublishDashboard.java:169)
    Caused by: The dataset could not be published to SAP Lumira™ Server because publishing to the SAP HANA layer failed. Reason is 'ServerNotConfigured'. (HDB 11009)
      at com.sap.hilo.platform.viweb.internal.VIWebPublisher.getPackageNameFromServer(VIWebPublisher.java:420)
      ... 9 more
    How i created the story
    - Source: simple .csv file
    - Visualization: Column Chart
    - Story: The Column Chart + dimension as control
    - Sharing: Story -> Publish to SAP Lumira Server
    Which versions do I use
    SAP Lumira Desktop: 1.15.1
    SAP Lumira Server: 1.15
    Does anyone have a suggestion on how to solve this?
    Glad for any help!
    Best regards
    Matthias

    Hello Matthias,
    Please see KBA 1995325 - Error when publishing Lumira to Server which describes how to resolve this issue.
    Quick link:
    http://service.sap.com/sap/support/notes/1995325
    Good luck!
    Tammy

  • Unable to Publish LUMS file to Lumira Server on HANA

    Hi SCN Community,
    I did quite a bit of research on this topic on SCN and other blogs but couldn't find the answer. I did all the configuration according to KBA 1995325.
    I have installed Lumira Server 1.23 on HANA SPS9. I have went through the configuration guide and done all the configuration I can find via Fiori portal.
    The issue I am having is I can create a lums document(tried Excel, Universe, HANA online/offline) in Lumira Desktop and it works fine but when I publish it to Lumira Server I get the following error. I get the same error when I try to create a data set in Lumira Server itself.
    Also I can publish the same lums document to Lumira Cloud and it works fine.
    I will appreciate any help. Thanks
    1st screenshot is of the published doc and the 2nd is when I try to create a data set

    Hi Gaurav,
    Try it without using Proxy (under Network, Preferences), and also (in case of online HANA view) use the same server name (including the domain name) in both the connection dialog, and Network, Preferences dialog.
    Also you can refer below link:
    Simplified SAP Lumira Server Feature Configuration
    Regards,
    Megha Jassal

  • Lumira Server Error

    We have successfully installed Lumira Server in a DEV environment.  I am able to see Analytical views which I created from my browser but when I attempt to publish from the client I receive the following error:
    Error - The dataset could not be published to SAP Lumira Server because publishing to the SAP HANA layer failed.  Reason is ''. (HDB 11009)
    We followed all the steps in the guide
    http://help.sap.com/businessobject/product_guides/vi01/en/lumS115_user_en.pdf
    We're raise a ticket but I'm just curious if anyone has seen this issue before.

    I still thinking about a security issue:
    Before users can publish content to SAP HANA, they must be assigned specific
    privileges and roles. These roles and privileges are also required for
    retrieving data from SAP HANA. Use the SAP HANA Studio application to assign
    user roles and privileges. For information on administrating the SAP HANA
    database and using SAP HANA Studio see SAP HANA Database – Administration Guide.
    For information on user security, see the SAP HANA Security Guide (Including SAP
    HANA Database Security).
    The user account used to log into the HANA system
    from Lumira must be assigned to the "MODELING" role (in HANA).
    Note:
    This action can only be performed by a user with ROLE_ADMIN
    privileges on the SAP HANA database. When an SAP Visual Intelligence user
    logs into the SAP HANA system, the internal _SYS_REPO account must:
    • Be granted the SELECT SQL Privileges.
    • Have the Grantable to others option selected on the (SAP Visual Intelligence) user's schema.
    To configure _SYS_REPO for the SAP Visual Intelligence user
    If an account for the Lumira user is already defined in the SAP HANA system:
    1. From the system connection in the SAP HANA Studio Navigator window, go to Catalog > Authorization > Users.
    2. Double-click the _SYS_REPO account.
    3. Under the SQL Privileges tab, click the + icon, enter the name of the user's schema, and click OK.
    4. Choose SELECT and the corresponding Yes under Grantable to others.
    5. Click Deploy or Save.
    Tip:
    You can also open an SQL editor in SAP HANA Studio and run
    the following SQL statement:
    GRANT SELECT ON SCHEMA <user_account_name> TO _SYS_REPO WITH GRANT OPTION
    If your user has this rights, I dont have an additional idea up to now

  • SAP Lumira 1.18 - Error while publishing story to Lumira Server

    Hi,
    I installed Lumira Server and did the configuration in SAP Fiori as mentioned in the blog below.
    Simplified SAP Lumira Server Feature Configuration
    I created following users with mentioned roles.
    LSADMIN - sap.bi.admin::BI_CONFIGURATOR and sap.bi.admin::BI_ADMIN
    LUMIRADEV - sap.bi.common::BI_DATA_ANALYST
    LUMIRADEMO - sap.bi.common::BI_DATA_CONSUMER
    I logged into SAP Fiori with LSADMIN and successfully added Lumira Configuration Tile to New Group "SAP Lumira Server" and Configured all the roles for Technical user (LUMIRATECH) that has sap.bi.common::BI_TECH_USER role assigned. It was successful. Please see the screenshot below.
    After this when I tried to publish a story (created using excel data) from SAP Lumira Desktop application to SAP Lumira Server with LUMIRADEV user, I am getting below error.
    Do I need to give any additional privileges to LUMIRADEV/LUMIRADEMO ids to be able to create/view stories?
    Please suggest.
    Thanks,
    Abhijit

    Hi Henry,
    We have SAP HANA SPS 08 Database Revision 82.
    I suspect this is an issue with some HANA Authorizations. So as a random trial, I assigned MODELLING role to LUMIRADEV user and also granted SELECT rights on LUMIRADEV schema to _SYS_REPO with grant option. Post that I noticed, I could publish Stories created on HANA in Online mode to Lumira Server with out any issue but still having same issue for other data sources e.g. HANA Offline, Excel etc.
    Please let me know if there are any additional rights required for LUMIRADEV user.
    Thanks,
    Abhijit

  • SAP Lumira Desktop - Lumira Server problem

    Hi everyone,
    Since a couple of days I try to publish some reports from SAP Lumira Desktop on SAP Lumira Server. Both versions are 1.15 and SAP HANA version is rev70.
    I installed Lumira Server as mentioned in installation guide. Imported package, created related users with needed roles and did define user in xs engine admin. But when I try to connect from Lumira Desktop to Lumira Server I get the error below. I also attached the error trace I found in HANA.
    Unfortunately  couldn't resolve the problem and I'm not sure where to look.
    Any ideas?

    Hi,
    I checked the trace file in Lumira desktop and found the error below. Any ideas?
    2014/06/19 06:20:11.123000|==|S| | 2772|  42| |||||||||||||||[com.sap.hilo.platform.viweb.internal.VIWebUserSessionManager]Opening VIWeb session
    2014/06/19 06:20:12.341000|>>|S| | 2772|  42| |||||||||||||||[com.sap.hilo.platform.viweb.internal.VIWebUserSessionManager]Session cannot be opened for user LUMIRAUSER on http://server:8001/sap/bi/launchpad. Check the parameters., reason is: No successful authentication possible
    2014/06/19 06:20:12.344000|>>|S| | 2772|  42| |||||||||||||||[com.sap.hilo.desktop.embeddedserver.httpservice.HTTPAdapter]Call to service 'openViWebSession' failed
    com.sap.hilo.desktop.embeddedserver.VIServiceException
      at com.sap.hilo.desktop.share.v2.common.service.OpenLumiraPlatformSession.execute(OpenLumiraPlatformSession.java:146)
      at com.sap.hilo.desktop.share.v2.viweb.service.OpenViWebSession.execute(OpenViWebSession.java:22)
      at com.sap.hilo.desktop.h5v2.common.service.BaseService.execute(BaseService.java:33)
      at com.sap.hilo.desktop.embeddedserver.httpservice.HTTPAdapter.execute(HTTPAdapter.java:89)
      at com.sap.hilo.desktop.embeddedserver.DispatcherServlet.handleRequest(DispatcherServlet.java:101)
      at com.sap.hilo.desktop.embeddedserver.DispatcherServlet.doPost(DispatcherServlet.java:86)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:755)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:848)
      at org.eclipse.jetty.servlet.ServletHolder.handle(ServletHolder.java:598)
      at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1367)
      at com.sap.hilo.desktop.embeddedserver.JsonPaddingFilter.doFilter(JsonPaddingFilter.java:78)
      at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1338)
      at com.sap.hilo.desktop.embeddedserver.clientappcache.StaticCacheGeneratorFilter.doFilter(StaticCacheGeneratorFilter.java:98)
      at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1338)
      at com.sap.hilo.desktop.embeddedserver.configurator.internal.SecurityFilter.doFilter(SecurityFilter.java:59)
      at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1338)
      at org.eclipse.jetty.servlet.ServletHandler.doHandle(ServletHandler.java:484)
      at org.eclipse.jetty.server.session.SessionHandler.doHandle(SessionHandler.java:231)
      at org.eclipse.jetty.server.handler.ContextHandler.doHandle(ContextHandler.java:1065)
      at org.eclipse.jetty.servlet.ServletHandler.doScope(ServletHandler.java:413)
      at org.eclipse.jetty.server.session.SessionHandler.doScope(SessionHandler.java:192)
      at org.eclipse.jetty.server.handler.ContextHandler.doScope(ContextHandler.java:999)
      at org.eclipse.jetty.server.handler.ScopedHandler.handle(ScopedHandler.java:117)
      at org.eclipse.jetty.server.handler.HandlerWrapper.handle(HandlerWrapper.java:111)
      at org.eclipse.jetty.server.Server.handle(Server.java:350)
      at org.eclipse.jetty.server.AbstractHttpConnection.handleRequest(AbstractHttpConnection.java:454)
      at org.eclipse.jetty.server.AbstractHttpConnection.content(AbstractHttpConnection.java:900)
      at org.eclipse.jetty.server.AbstractHttpConnection$RequestHandler.content(AbstractHttpConnection.java:954)
      at org.eclipse.jetty.http.HttpParser.parseNext(HttpParser.java:851)
      at org.eclipse.jetty.http.HttpParser.parseAvailable(HttpParser.java:235)
      at org.eclipse.jetty.server.AsyncHttpConnection.handle(AsyncHttpConnection.java:77)
      at org.eclipse.jetty.io.nio.SelectChannelEndPoint.handle(SelectChannelEndPoint.java:606)
      at org.eclipse.jetty.io.nio.SelectChannelEndPoint$1.run(SelectChannelEndPoint.java:46)
      at org.eclipse.jetty.util.thread.QueuedThreadPool.runJob(QueuedThreadPool.java:603)
      at org.eclipse.jetty.util.thread.QueuedThreadPool$3.run(QueuedThreadPool.java:538)
      at java.lang.Thread.run(Thread.java:811)

  • SAP Lumira Server 1.18 - Error While creating visualization

    Hi,
    I installed Lumira Server 1.18 and configured as mentioned in the blogs below.
    Simplified SAP Lumira Server Feature Configuration
    I created following users with the roles mentioned -
    LSADMIN - sap.bi.admin::BI_CONFIGURATOR and sap.bi.admin::BI_ADMIN
    LUMIRADEV - sap.bi.common::BI_DATA_ANALYST
    LUMIRADEMO - sap.bi.common::BI_DATA_CONSUMER
    I did the configuration in SAP Fiori mentioned in the blog with LSADMIN id. I also had Technical user id LUMIRATECH with sap.bi.common::BI_TECH_USER role which was used for configurations in Fiori. It was successful. Please see the screenshot below.
    After that I logged on to SAP Lumira Server Launchpad (http://<SERVER>:80<INSTANCE>/sap/bi/launchpad) with LUMIRADEV user. I acquired the dataset from excel. But when I tried to create visualization post successful acquisition, I am getting below error on dropping any dimension/measure on to chart.
    Please help. Do I need to give any additional rights to LUMIRADEV?
    Thanks,
    Abhijit

    Hi Henry,
    We have SAP HANA SPS 08 Database Revision 82.
    Are there any additional authorizations required for LUMIRADEV user (user which is used for Lumira Server). Please note I am able to publish stories and data sets created on top of HANA Online connection from Lumira Desktop and I am able to access, edit Stories as well as create visualization from published data set on Lumira Server. I suspect this is an issue with authorization.
    Appreciate your help.
    Thanks,
    Abhijit

  • Authentication issue getting "UMELoginException"

    Dear Guys,
    I am facing an authentication issue. The situation is like this,
    My NT password was about to expire (had 6 more days for expiry). I was able to login till yesterday and all of the sudden today, when I was trying to login, I was not able to (it gave me password change message). So I went back and changed my NT password and tried to login again into the portal, however I am still not able to. I am pasting the stack trace,
    #1.5#001143FDCEA7006700000008000018C40004196E4AD849E8#1153861399615#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.sapmimp.logon.SAPMLogonLogic][md=doLogon][cl=20282]#Guest#192####fff21cf01c2011dba425001143fdcea7#SAPEngine_Application_Thread[impl:3]_0##0#0#Error##Java###doLogon failed
    [EXCEPTION]
    #1#com.sap.security.core.logon.imp.UMELoginException
         at com.sap.security.core.logon.imp.SAPJ2EEAuthenticator.logon(SAPJ2EEAuthenticator.java:318)
         at com.sapportals.portal.prt.service.authenticationservice.AuthenticationService.login(AuthenticationService.java:344)
         at com.sapportals.portal.prt.connection.UMHandler.handleUM(UMHandler.java:126)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:186)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:312)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:368)
         at com.sap.portal.navigation.Gateway.service(Gateway.java:101)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Please help.
    Regards,
    Deepak

    Hi Deepak,
    it is most times that it needs to replicate through your system(s).
    Regards,
    Kai
    PS: Please reward points if that was helpful.

Maybe you are looking for