LUMIRA Server Auto refresh reports

Hi,
In Lumira Server 1.17. Is it possible to auto-refresh reports without refreshing the web page? Only when I refresh the page, then the data gets updated.
Thanks.

Hi Cherry,
I believe the only option to schedule a refresh of a Lumira data set is when it is based on a .UNX universe. The BI 4.1 platform will enable this functionality from within the CMC. Here you can schedule a refresh and the data will be updated on the HANA platform.
Please let me know if you have any additional questions!
With kind regards,
Martijn van Foeken | Intenzz

Similar Messages

Auto-refreshing Report

All,
I'm using HTMLDB 2.0 (upgrade from 1.6) and I'm trying to build a report auto-refreshing at fixed time intervals (i.e. 15 sec.) or based on table updates. Can you help me ?
Message was edited by:
rnegro

http://htmldb.oracle.com/pls/otn/f?p=11933:40:6577557243619141460::NO:RP::

SmartView auto refresh OBIEE report

I cannot find way to automate process between SmartView and OBIEE.
1.Smartview connect OBIEE
2. after connected, auto refresh report.
Please help.

Hi,
About this:
>
Suppose from emp table i am querying a report as
select emp_num,emp_name from emp;
i want to insert this emp_name and emp_num to the new table.
>
What exactly you want to do?
1) After every refresh (i.e. after 5 minutes) you want to create a new table an insert the values of emp_name and emp_num.
2) You want to store the values of emp_name and emp_num after every refresh in a new table(that is already created).
Didn't get your purpose behind this?
Regards,
Kiran

Refresh report in siebel analtics 7.8.4

Hi how can we auto refresh reports in the dashboard of siebel analtics?

You can set the caching to specific interval in repository tables. You can set the webcache to purge after specified time and even can have a report ingore web cache. Also look into event polling tables.

SAP Lumira server refresh

How does data refresh work for SAP lumira server for UNX /SQL data sources? Do we need to publish new datasets manually or server has direct DB connectivity ( similar to BO universes). The details around data refresh is bit thin around SAP Lumira Server.
Thanks
Vijay

Hi Vijay
No it's not 1.16. We will be making an announcement at Sapphire of the details and then on SCN shortly after. Based on the current planning, it will require:
- Lumira Server 1.17
- HANA 1.0 SP8 (pre-req for Lumira Server)
- BI 4.1 SP3
- SAP BusinessObjects BI, add-on for SAP Lumira (a.k.a "Lumira add-on")
However the plan is subject to change. I hope to be able to provide more concrete timelines within two weeks but it should be coming soon.
Do you have BI 4.1 SP3 environment?

Auto Scheduled run of the Sql server management studio or a auto refreshing query

Hi ALL ,
This is a very different weird requirement but workaround for one of my requirement . Scenario is that sql server enterprise edition is installed on a vm . I create a session with the vm using the remote desktop . I have scheduled a ssis package
on the server and it should run 4 am daily us timing but its failing . If in case a user is connected to the management studio package runs on time . So i have to disconnect from the remote desktop and its not possible for me to login at 4 am every day for
running package.
Requirement : Is it possible that the sql sever management studio automatically turns on at 03:30 am and authenticates in .If that is possible my package won't fail . If this is not possible is it possible that sql script auto refreshes every
30 min's so what i can do i will run the auto refreshing script in the management studio once and will disconnect the remote desktop not the sql server session so my virtually my session on vm will end but vm is always on from the vcenter and there is some
activity on the sql server management studio so even the application won't be closed after a stipulated time frame leading to running of my package on time.
Please help

Hi Latheesh NK ,
Below is the error message SSIS one i extracted from the history :
Date       3/8/2014 11:00:00 AM
Log       Job History (SSIS package)
Step ID       1
Server        xyz\xyz
Job Name       SSIS package
Step Name       Package
Duration       00:00:01
Sql Severity   0
Sql Message ID   0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted   0
Message
Executed as user: xyz\Administrator. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 11:00:00 AM Error: 2014-03-08
11:00:01.31     Code: 0xC0208449     Source: Data Flow Task 1 Source - Query [95]     Description: ADO NET Source has failed to acquire the connection {68D5B1D7-17B1-4F95-9B1D-7615425C4A07} with the
following error message: "ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified". End Error Error: 2014-03-08 11:00:01.31     Code: 0xC0047017     Source:
Data Flow Task 1 SSIS.Pipeline     Description: Source - Query failed validation and returned error code 0xC0208449. End Error Error: 2014-03-08 11:00:01.31     Code: 0xC004700C     Source:
Data Flow Task 1 SSIS.Pipeline     Description: One or more component failed validation. End Error Error: 2014-03-08 11:00:01.31     Code: 0xC0024107     Source: Data Flow Task 1
Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:00:00 AM Finished: 11:00:01 AM Elapsed: 0.406 seconds. The package execution
failed. The step failed.

Cannot disable auto-refresh on a report

Hi,
When I click on the ON/OFF switch the "save and refresh report" and "save settings" buttons get disabled so I cannot save the settings and thus cannot turn the refresh off.
Thanks for your help.
Kind regards
Benjamin Moles

Ben,
Is this still an issue?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Using Excel 2007 to display and auto-refresh planning.

Hi all,
a customer wants to display a simple planning screen on a 24" monitor.
We're using an old domain pc, with domain user (planning) logged on to display the planning file.
We've configured the worksheet so that multiple users can edit it.
I've also found the settings which auto-update the file. I was amazed that this is standard functionality.
Although, it doesn't work as we expected. It goes well, but when too much users work in the file, some users still get the error message: 'can't open file because it's already in use'.
This does NOT happen when the file is not constantly opened by the 'planning user'.
So that's one issue, probably caused by the 'planning user', having the file opened 24/7.
Another issue is that the file stops auto-refreshing after a while. I didn't find any pattern in that.
So basically, what the customer needs is:
Display Excel worksheet
Auto-refresh
I've found some nice articles about SharePoint and Excel services, but unfortunately they're running SharePoint 2010 Foundation, which does not include Excel services...
Is there any other way or tool to achieve this, without using the Excel-built-in options?
Or maybe there's a fix for that problem?
Thanks in advance.

Hi LunAds,
I'm afraid you have just discovered how bad these features are implemented in Excel: they just don't work properly and I always advise against using them for any serious long-term solution.
If you do not have Excel services, then editing the document on the server (which would prevent lots of problems) is out of the question indeed.
Alternatives depend a lot on your needs.
For example, you could use sharepoint lists that the users can edit and then import those lists into Excel for reporting purposes.
But if this is relational data (parent-child tables, which is very often the case) then a database solution is probably the best route to take.
Regards, Jan Karel Pieterse|Excel MVP|http://www.jkp-ads.com

Konqueror file management and auto-refresh

Hello all,
I am working with Arch and KDEmod and so far everything is pretty good. I do have one problem that is a bit annoying.
Konqueror file manager windows do not automatically refresh when viewing the URLs system:/home or system:/users/jay. The system:/home URL is what is opened when you click on the "Home" icon, so this makes this problem stand out.
Anyway, the problem can be reduced by doing the following:
1. Open Konqueror file browser and select "Home Folder" from the tree on left. This puts you at the URL system:/home. (Alternately, just click on the "Home" icon that gets set up in the kicker by KDEmod.)
2. In a terminal window create a file in your home directory. Note that the file does not show up in the Konqueror window.
3. Press F5 to refresh Konqueror. The newly created file now appears.
4. In a terminal window delete the file you just created. Again, note that the file does not disappear from the Konqueror window.
5. Press F5 to refresh Konqueror. The file now disappears.
The correct behavior is that when you create and delete the file, it shows and then disappears from the Konqueror window accordingly. Currently this does not work for the system:/home (Home Folder) or system:/users/jay (Users Folders/<user full name>) URLs. Interestingly enough, if I type the URL "/home/jay" into the Konqueror location bar in file management mode and then do the above steps, the auto-refresh works fine.
Does anyone have any clues as to why the refresh doesn't work for the system:/ URLs? Is this by design? What plugin actually provides the system:/ URL schema?
Thanks for any suggestions,
Jay

Hi LunAds,
I'm afraid you have just discovered how bad these features are implemented in Excel: they just don't work properly and I always advise against using them for any serious long-term solution.
If you do not have Excel services, then editing the document on the server (which would prevent lots of problems) is out of the question indeed.
Alternatives depend a lot on your needs.
For example, you could use sharepoint lists that the users can edit and then import those lists into Excel for reporting purposes.
But if this is relational data (parent-child tables, which is very often the case) then a database solution is probably the best route to take.
Regards, Jan Karel Pieterse|Excel MVP|http://www.jkp-ads.com

Need help setting up auto-refresh

Hi,
I need help figuring out why auto-refresh is not available in my situation:
I have a SQL Data source with the following settings:
Status
Ready
Gateway
Cloud Access
<label data-bind="text: DataSteward.Sections.DataSources2.Converters.booleanEnableFormatter(EnableCloudAccess())" id="info-cloudaccess-label">Enabled</label>
OData Feed
Enabled
Then I created a spreadsheet with Power Query table and Power View chart. Power Query is using one and only view enabled in the data source. Data table has been added to the data model.
Now, when I upload the spreadsheet to Power BI site, then enable it for Power BI and try to setup the auto-refresh, I get the following:
You can't schedule a refresh for this report because it contains no data connections.
Technical Details
▼
Correlation ID:
bac4d3a0-dc11-4543-99de-eff2fb0c5d47
Date and Time:
03/16/2015 04:35:28 AM (UTC)
The report surely contains data connections (under DATA > Connections). Please advise as this is quite confusing. Thanks.

Hi Mini,
Thanks for getting back. Your workaround helped a lot. Now I can see the auto-refresh settings. However, when I try to "test connection" under the auto-refresh settings, it is giving me the following error:
OnPremise error: Sorry, the data source for this data connection isn't registered for Power BI. Ask your Power BI admin to register the data source in the Power BI admin center. Correlation ID: 4d4a7553-1177-43f3-9afd-14bd1b0263ec
The data source is configured the following way:
Enable cloud access = yes
Searchable in Power Query = yes
Enable OData feed = yes
Data source type = SQL Server
Please advise as the error message is misleading. Thanks a lot.

Cannot load report from server in Crystal Reports 2013 Viewer

Hello,
I am having trouble opening a report that is hosted on a Crystal Reports Server (2013) from the Crystal Viewer. I've created and uploaded the reports using the report designer (version 2013). The reports have been uploaded using the "Save As -> Enterprise" to save to my enterprise server. This part works fine. I then navigated to the Crystal Reports Viewer to open my report (that I just uploaded w/ the designer) from the server. Depending on the report, one of two things happens:
1.) I get a loading bar at the bottom right of the screen that says "Operation in progress . . ." followed by an error message:
Unable to Refresh Report
A problem occurred while refreshing on the server. The report may not be configured properly for refresh.
Please contact your server administrator. (me)
2.) I get a loading bar at the bottom right of the screen that says "Refreshing <file name of the report> (<server name>)" followed by... nothing. The loading bar goes away and nothing happens. It goes back to the screen that shows when the application first loads (blank canvas).
I've taken some basic troubleshooting steps to try and rule out any potential issues that came to mind, but I've not been successful.
Any help would be appreciated, thanks!

Hi
Check the below thread
Crystal Reports 2013 data didn't refresh using OLE DB Provider for SQL Server
With Regards
Balaji Sampath

Broadcasting of workbooks, auto-refresh and other questions

Hello Reporting gurus.
Our users run BEX Analyser queries but this is evolving towards more automation and fancy things. A lot of threads exist on the subject but I have not been able to find clear answers. We are on BI 7.
1) How do we use the broadcaster to refresh workbooks and output the results to a network share drive.
2) Queries being part of the workbooks work with user input variables. Do I have to change all queries (or create new ones identical) with user exits variables to fill in the fields for auto-refreshing w(ith let say the current year and current fiscal period etc...) ?
3) Is it possible to create a parameter input screen to pass on variables values to the broadcaster before the auto-refresh takes place so that I don't have to create user exit variables ?
4) How can we view workbooks with the BEX WEB Analyser ? Or do we have to create an application with WAD ?
Thanks

Hi Yves,
in Analyzer you have an menu entry publish with BI broadcaster, then a broadcaster will appear. there you can create a setting. inside that setting you can use a variant and with SPS 13 also variable sets. There you can define the users who should receive the updated workbook by mail. It is not possible to save to file system, but you can save in Portal.Web Analyzer is only to use with WAD and is not able to process Workbooks.
best regards,
kai

WIS 10901 error while refreshing report in rich client

I'm facing a strange issue while refreshing a report from Rich client. Here are details
Environment: BO XI 3.1 SP3, Oracle application DB. Weu2019ve 2 BO servers (S1 and S2) on cluster and load balancer (common URL) in front.
While login to S1 with 6400 port, I can refresh report in rich client.
While login to S2 on 6400 port or using common url, during refresh gives below error u2013
u201CA database error occurred. Database error text is: (CS) u201CDBDriver failed to load: C:\Program Files\.....\dbd_oci.dllu201D (The specified procedure canu2019t be found) (WIS 10901)u201D
Iu2019ve installed oracle8i client on my system. Any idea what causing this issue?

Yes. Oracle 10g client installed on both application server. I've teste the universe connection from server, it's working fine.
Any idea what could be probable causes of "DBDriver failed to load: C:\Program Files\.....\dbd_oci.dllu201D error?
One observation, the path of dbd_oci.dll is the BO installation directory of my local machine (on server BO is not installed on C drive). Why it's referring dbd_oci.dll from local client even in 3 tier mode?

How to display more than 10 rows in an Auto Updating Report

I followed Carl Backstorm's example, http://htmldb.oracle.com/pls/otn/f?p=11933:40:525653462286833::NO:RP:: to create a page with an auto update report/region. It's working fine (thanks, Carl) but I can't have the report display all rows (38 rows in total). Everytime I press the "Manual Refresh" button, it shows 10 (the first 10) rows only.
When the report displays at the first time, it shows all the rows (38 rows). Number of Rows and Maximum Row Count are set to 999999 and "No Pagination Selected" in the report region. But after I press the "Manual Refresh" button or specifiy an update time value (like 1 second) to have it auto update, then it only display the first 10 rows.
Is there a way to display more than 10 rows in an Auto Updating Report using Carl's example auto update report/page? Anyone can help? Thank you.
-Michele
Edited by: 106451 on Jun 30, 2010 10:12 AM

Yes, I changed it to:
function table_object(pId){
     this.id = pId;
     this.start_record = 1;          //optional
     this.num_record = 50; //optional
     this.num_record2 = 50;          //optional
I don't quite understand how these vaiables are used for though. Thanks.

Auto refresh in BPM Composer

Hi Experts,
I am using Weblogic 10.3.5 and configured managed server for BPM 11.1.1.5.
The Business Process Composer’s project page is getting auto refresh at every 30 seconds. Kindly give the solution for resolve this issue.
Thanks in advanced
Regards,
Bala.

Rakesh, is this still an issue?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

LUMIRA Server Auto refresh reports

Similar Messages

Maybe you are looking for