LUMIRA: Values disappear in column Chart

Hi Experts,
I have been working with Lumira, I am using column Chart, but when I put in the dimension X Axis the Dirección. I cannot see all the values (we have nine directions). These values disappear.
If I change the chart to position “Horizontal”, I can see more values but not all.
Could you help us with this issue? Someone has reported this problem?
DGFM

That is very strange - I haven't seen that.
Unless SAP responds here I recommend logging a ticket with SAP Support

Similar Messages

Problem with mouse-over value on a column chart (by Series)

Hi.
First of all thanks for any offered tip.
I am having a problem with a column chart.
When I move the mouse over a column it should show a small pop-up (or tip) with the column name (series name) and the value (series value). The problem is that it displays an extra '1' just like the following:
SeriesName
1
X.XXX
How can I remove the extra '1' and only show the name and the value ?
The data is populated by series (manually added).
Mihai.

Hi,
Thanks for the tip Shanthakumar KA.
Yes. It looks like the '1' is coming from the X Axis labels. The chart that I have built does not require any labels on the X Axis, so this was not set (X-Axis labels: Empty). I tried setting this to an empty cell, but the '1' still appears in the mouse-over tip.
It is very weird. If I leave the X-Axis labels empty, I still get the '1' displayed which is very annoing.
Are there any solutions for this except the re-building the tip with a label a.k.a. '[customize the mouse over values|http://xcelsiusandme.blogspot.com/2009/07/xm-sample-7-customizing-mouse-over.html].'
Regards,
Mihai.

Vertical value in column chart

Is it possible create value labes in column chart but in vertical position?
Here we have value like 0.5, 0.3, 0.8 but I need create this in vertical.
http://i.stack.imgur.com/sDtUd.png
Someone have any idea?
Best bro.

ilkam wrote:
I thought about it but I have a lot of charts and I can't use this method.
Is it possible to rotate the chart? Line chart rotate 90* to left may solve this problem.
Yes, you can rotate the chart, but only after you convert it to a graphic. You can't rotate a live chart. A rotated Bar Chart would look like this:
You probably would want to turn off the Legend if you do this.
Jerry

Business Graphics: Time Scatter, Line Chart, Column Chart

Hi all,
I have a requirement of intermixing of Bar/Column-Chart and Line-Chart. How to do this? I also need to color the columns.. Any Documents or Ideas will be appreciated.
Thanks,
    Vinod V

Hi, Rohit & Neha
   I think, my question is not clear..
My requirements are on Business Graphics (Not in IWDTable), where i need to represent my data in different columns (Levels). Each level will be Represented in different colors.
Eg: Top level of my Graph will have RED,
      Middle by YELLOW and
      Bottom part would be with GREEN.
My Second Question is on using Multiple Graph types in same graph...
Where data will be represented in Column/Bar Chart and in the same graph i need a curve to display the max value pointed by Column Chart..
How can i achieve this?
Regards
   Vinod V

Mouse Move on the column Chart

Hi all visitors
I have created one crystal report and in my report i have created one column chart.
but i don't show the value on the column chart,however, when i move mouse on that column chart,
it will show the value.but in crystal report server,when i move the mouse on the column, it doesn't show the value like crystal report.
Anyone know about this how to show the value on the column when mouse move in crystal report server?
Please help me for this.
Best Regards,

Unfortunate Tool tip doesn't work with CR Charts.
Probably there may be some trick that will configure to achieve. But I didn't came across till now.

SSRS Column Chart Design Returning values in a format different from SSRS -SSAS Query Designer

Hi All,
I have an SSAS cube Measure Group with Multiple Measures that I am attempting to return on one SSRS report and reflect the
values using a ssrs column chart.
My Measure Group (Patients).
Measures:
PatientsOnMeds
PatientOnRelapse
PatientsCounseld
TotalNumberOfPatientsRegisterd
NewlyRegisteredPatients
HealthPersonelTrainef
Demension:
Time (Year) :filtered to 2012 & 2013
In my SSRS query designer I have filtered the above Measures with Time Dimesion year 2012 & 2013
and the data is returned as :
Year |PatientsOnMeds|PatientOnRelapse|TotalNumberOfPatientsRegisterd|NewlyRegisteredPatients|
2012 | 700 | 526 | 25 | 456
2013 | 245 | 245 | 15 | 70
Now the problem is when I return this data on the column Chart it's in messed up mesh
On the chart Data:
-Values :Measures
-Series Group: Dimension
The report values are returned in multiple columns for each value segmented by year i.e year 2012,Year 2013.
I want a single column for each Measure (value) for each single year and The chart axis to reflect the measures(values)
instead of grouping values according to series group.
instead the legend returns:
-Year A -PatientsOnMeds
-Year A -PatientOnRelapse
-Year B -PatientsOnMeds
-Year B -PatientOnRelapse
I would like the legend to reflect on -Year A,Year B in color code that will be highlighted in the column values.
Please point me in the right course if you can.Your insights are highly appreciated.Thank you in advance.

Hi Charlie,
Thank you for your kind response.
In actual I want the legend to show:
-2012
-2013
And the bottom axis to show:
PatientsOnMeds
PatientOnRelapse
PatientsCounseld
TotalNumberOfPatientsRegisterd
NewlyRegisteredPatients
HealthPersonelTrained
Indicating in color code for Year 2012 and Year 2013.
This the challenge that I am struggling with.I hope you understand my scenario.
It aint easy.

How to display the value of a column in a chart at the top of each column

How to display the value of each column in a chart at the top of each column?

Like this?
Done using chart Inspector.
For details, see Chapter 7, Creating Charts from Numerical Data in the Numbers '09 User Guide. The guide may be downloaded via the Help menu in Numbers.
Regards,
Barry

Values rotation for 3D Column chart not working

Hello,
I have a 3D Column chart type, using the Apex integration kit for anychart 5.1 and have the Values Rotation set to 90 Degrees.
However this setting or any other does not have any effect on the chart. The decimal_places setting also does not have any
effect.
This is the line in the custom XML
<values show="yes" prefix="" postfix="" decimal_separator="." thousand_separator="," rotation="90" decimal_places="0">
How do i get the values to be rotated?
Thanks in advance,
Sieudial

Hello,
I created a complete example site. An example of a 3D Column you find here: http://anychart.apex-evangelists.com/pls/apex/f?p=755:9:0::NO:::
If you click at the bottom, you see the source I use.
In Anychart 5 the values got replaced by labels, e.g.:
<label_settings enabled="true" rotation="90">
<format>{%Value}{numDecimals:0}</format>
</label_settings>Hope that helps.
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/

Value range(column chart): management cockpit

Hi friends,
how can i put value range condition in column chart. my situation is like this
I have 10 employees with expereinces 4.1(i.e 4 yrs 1 month),5.5, 1.2, 0.5, 3.5, 0.2, 4, 6, 7 and 8.
I want to present in column chart in x-axis like <1 yrs, 2-4,5-6,>7 and in y-axis count.
How can i achieve this. I maintained calculated keyfigues(for <1 yrs, 2-4,5-6,>7) on key figuer total experience and, in bi report i'm getting correct output. Even total experience is also calculated key figure and perfectly viewing this value in cockpit. But in managment cockpit, remaining calculated keyfigues(<1yrs,2-4,5-6,>7) i'm not getting. So i want to prefer to set value range in chart.
pls suggest me.
thanks,
raju

Hello Raju,
You can achieve this by simply using a User defined Periodization & Time Variable.
http://help.sap.com/saphelp_sem60ep1/helpdata/en/1b/3131375fc9342ae10000009b38f839/frameset.htm
Defining Periodizations
1.     To define a periodization, choose Periodization in the dialog structure.
2.     Choose to switch to change mode.
3.     Choose New Entries.
4.     In the Periodization column, enter a name for the periodization (up to four characters).
5.     In the Fiscal Year Variant column, choose the fiscal year variant on which you want to base the periodization. (The periodization itself is based on periods of the fiscal year variants.)
6.     In the Long Text column, enter a descriptive name for the periodization.
7.     Save your entries and return.
8.     In the list of periodizations, select the periodization you just created.
9.     Choose Interval in the Dialog Structure.
10.     Choose New Entries.
11.     In the Interval No. column, enter a sequential number for each period to be defined, starting with "1".
12.     Specify the left time limit (= Start column) and the right time limit (= End column) of the range by entering the respective period of the fiscal year variant on which it is based.
Eg: In your case you follow this
               Start Column          End Column
Period 1(<1 yrs)           1               12
Period 2(2-4 yrs)                     13               36
Period 3(5-6 yrs)                     37               60
Period 4(>7 yrs)          61               specify the no. of months you want to calculate for
13.     Save your entries and return
In the Cockpit-Frame-Design screen for the mesures(KPI) on the Y-axis you select the check box of Periodization and select this User defined Periodization created by you. You click on the aggregation box too to get the cummulative value for the defioned periods.
Hope this helps. Revert incase of any query or let me know if it doesnot work as I have tried this with quarters and its working fine in my case.
Regards,
Priyanka Singh

Stacked Column Chart Value does not show in Preview or SWF

I have created a simple (one-column) stacked Column chart from an imported Excel 2007 spreadsheet. I am using 3 values and all three are there when I am editing the chart. When I do a Preview or Export it to a .swf file, the third value does not show up. It only shows the first two.
I am running Xcelsius 2008, Version 5.1.3.0, build 12,1,3,495.
Edited by: Rich Krejsa on Apr 9, 2009 9:35 PM

Hi Rich,
Try to rebind the data with the component and preview and see.
Also check with other charts to see if you get the same behaviour.
Try placing a table component and display those cell and see what values are there when you preview.
There could also be posiblities that the third values must be very small as compared to the other two,so check that as well and may be select the secodry scale in the general tab for the 3rd series.
Let me know if this helps.
Thanks,
Amit Mathur.

Xcelsius - Stacked Column Chart - Overall value / Result

Hi *,
does somebody knows how I can display the overall value of my columns in a stacked column chart?
Or is there a workauround to do this?
Thanks and regards,
Markus

Yes, it would absolutely be nice if they provided this option for the stacked charts.
Couple of other options-
Create a bar chart that graphs the totals as one series. Specify that it should show the data values, adjusting an offset so the totals appear to the end/top of the bar, Place the totals chart behind your stacked bar chart. obvioulsy the cahrts have to align precisely.
Another option - concatenate the total amount so it appears as part of teh axis label. This works better for some scnarios than others.
See this video example to get an idea of how this might work.
http://everythingxcelsius.com/2009/06/show-chart-values-without-hovering.html
With SP3, if there are only a few series in your chart, another option you can play with is adding an additional series for each series in your chart. Have a very small value that won't register visually on the chart e.g. .001, and then assign category labels for each series that is total value for a series, and choose to display the lables. Hard ot explain this one well, I 'll see if I can put togeter a simple example. This gets ugly quickly.
I'd love to hear ideas from others.

In column Chart when Y values are grater than y linear axis maximum it doesnt show the Bar

Hi Guys,
In column Chart when Y values are grater than y linear axis maximum it doesnt show the Bar.But i want show the bar upto the max limit of y linear axis without changing the max limit.
Consider following example:
Y values are 80 90 200 300
and following are the output :
Left:When i am not setting maximum property of linear axis.
Right :When i am setting maximum property of linear axis to 200.
In right 4th bar is not visible bcoz value for that bar is 300 which is excedding maxium.But i want the 4th bar to appear same as 3rd bar.
How i can do this?
Thanks in advance.

Are you going to show the bar going past the maximum value?
If not, then you should change the Y value when entered into the array to the maximum value allowed. i.e.
if(itemYValue > maxAllowedValue) {
itemYValue = maxAllowedValue;
Where maxAllowedValue is a variable you set on the application to control the maximum value for the chart.
This is assuming that you are loading the values into an Array before updating the chart dataprovider with that array.

Dsiplay data values and data lables in a stacked column chart

Hi All
Is there a way to display data values and data labels in a stacked column chart. Mouse over or display of labels in legends wont help. It has to be in the chart .
Regards,
anshul

Hi Anshul,
You can display either data value or data label in a stacked column chart by checking the Data Label Displaying Mode option under Format Chart->Data Values.
You can also do the same by checking the same option under Format chart->Area Display->Data Values.
I dont think you would be able to display both in a column chart whereas you would be able to do it in a pie chart.
Hope this helps.
Regards
Sri Harsha

Help Creating Dynamic Stacked Column Chart with Multiple Criteria

Hi all. Im new here and hoping you can help. I have a dashboard Im trying to rebuild from scratch (our computer had a meltdown and we lost all our files). I did not build the dashboard initially so Im trying to recreate it from the flash file we were able to recover. I have come across a chart that I just cannot figure out how to do. I can figure out how to write an array in the Excel sheet that pulls the data into a table the way I need it to be but found out after I wrote that that Xcelcius doesn't support arrays so all my data disappears when I go into preview mode (which is especially frustrating since I can see the chart working fine in design mode). Anyway this is what the data table looks like
Month         Year            Company      Positive #          Negative #         Neutral #          Positive %       Negative %      Neutral %
October      2011            CompanyA      1234                1234                 1234                 10                    10                    10
October      2011            CompanyB      1234                1234                 1234                 10                    10                    10
October      2011            CompanyC      1234                1234                 1234                 10                    10                    10
October      2011            CompanyD      1234                1234                 1234                 10                    10                    10
November 2011            CompanyA      1234                1234                 1234                 10                    10                    10
November 2011            CompanyB      1234                1234                 1234                 10                    10                    10
November 2011            CompanyC      1234                1234                 1234                 10                    10                    10
November 2011            CompanyD      1234                1234                 1234                 10                    10                    10
December 2011            CompanyA      1234                1234                 1234                 10                    10                    10
December 2011            CompanyB      1234                1234                 1234                 10                    10                    10
December 2011            CompanyC      1234                1234                 1234                 10                    10                    10
December 2011            CompanyD      1234                1234                 1234                 10                    10                    10
The original chart was built so that you would choose the month from a combo box and then the company names would show up along the X axis with their % amounts shown in the stacked column. I know how to make a combo box work and I know how to make a stacked column chart work with static data. I cannot for the life of me figure out how to get it to work so that when you choose the month from the combo box it filters the data. I've tried filtered rows but I'm just missing some information that makes it work and I can't figure out what that information is. It has to be able to get the month/year combo from the combo box and then go to the table, filter it by month and year and then create a multi-row table of data with just the company and the percent values. Any help would be greatly appreciated!

Which connection you are using?
IF quite difficult if you are working under static data.

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

LUMIRA: Values disappear in column Chart

Similar Messages

Maybe you are looking for