Lumix FZ150 Raw files aren't opening in Bridge or Mini Bridge in PS CS5

I've downloaded the DNG 6.6 ACR update and images still don't open in PS/Bridge. Does the "Convert to DNG" box need to be checkmarked under Bridge Preferences?
Thanks for helping.
MJ

Does the "Convert to DNG" box need to be checkmarked under Bridge Preferences?
Don't know what setting you are revering to, do you mean the Photo downloader?
It seems your camera is supported.
See the support list (under Panasonic) at this page:
http://www.adobe.com/products/photoshop/extend.html
and read the instructions for a correct ACR plug in install on the ACR page
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5311
Meanwhile you can check if you have installed the correct version of your ACR plugin and there should be only one version installed.
In Photoshop go to the menu Photoshop / about plugin and look under Camera Raw.
There should be only one version visible and it should say 6.6

Similar Messages

Panasonic Lumix FZ1000 RAW files support in Lightroom 4

http://blogs.adobe.com/lightroomjournal/2014/07/camera-raw-8-6-and-dng-converter-8-6-now-a vailable.html
The above says that Panasonic Lumix FZ1000 RAW files are supported in camera raw 8.6. I specifically checked before buying the camera. Everything I have ever read on the Adobe website for some 3+ years said that if a file in supported in Adobe Camera RAW, it is also supported in Lightroom. Particularly, the above URL did NOT give any warning about the FZ10000 RAW files NOT being supported in Lightroom 4. I went ahead and purchased the FZ1000, only to find I'm now having problem with Lightroom 4 not recognising the RAW files at all. I'm really annoyed, as I was so careful to check the Adobe website first. WHAT THE HELL IS GOING ON WITH CAMERA RAW AND LIGHTROOM?????

I do appreciate the many RAW file formats being created by the camera manufacturers, as I have had varying cameras with the varying formats, and so am very aware of the whole business of making sure how those formats will fit into my software. And, as already stated, appreciate Adobe's efforts to deal with all those formats.
This whole exercise has been upsetting, and there has been some good advice and info provided in this discussion.
And unfortunately, some input that has been a little too technical and not particularly helpful. I feel that some of the input was a little too critical and didn't recognise that maybe some of us aren't so are highly involved and knowledgeable in Adobe products and the technicalities of how the software works, dot versioning of software, executable coding etc. because we don't need to, and shouldn't have to. I have bothered to learn Lightroom well in terms of its functionality including matters raised by you (eg making LRoom edits visible in other software, knowing that LR is not making changes to the actual files, rather they are in sidecar or xmp files etc.). I have bothered to learn a reasonable amount of computer-related info to understand things in plain English terms, such as "to have PShop and LRoom to recognise my RAW files, I need to have ACR. To have them run on my PC, they must be compatible with Windows operating system version xxx. For many people, this level of knowledge should be enough.
I have NOT said I expect Adobe to get advance copies of file formats from manufacturers; I have NOT said that I expect Adobe to support every new camera model immediately.
The technicalities of the coding and whether Lightroom "uses" the ACR plug in or not is not quite so much the issue, and I don't find the statement that "Lightroom does not use the Camera Raw plug-in" helpful. I don't think it's really right either. Lightroom - one way or the other - DOES "USE" ACR as the ability of Lightroom to recognise files is very much dependent on the version of ACR that you have. LRoom may not use the ACR plug in as PShop/Bridge in the exact same way (eg for the actual editing of files such as exposure, white balance etc.), but Lightroom DOES USE the ACR PLUG IN.... in regard to the file recognition issue.
And Yes.... I made a mistake. Somehow, despite what I thought were good efforts to research the Lumix's support in PShop CS6, Bridge, ACR and Lroom 4, I got it wrong. I will accept that it was my mistake and I'll accept my part in this, but I won't be made to feel that that it's been "totally" my fault, stupidity, whatever.
Thanks to all the people who have provided useful comment and input to my original question and subsequent responses throughout this discussion. I will indeed now consider options like the DNG converter. I was aware of the whole cloud thing, and had been thinking I would upgrade in perhaps a couple of years time (for both Pshop and LRoom) - I'll have to consider upgrading sooner rather than later.

Does PSE 12 and PSE 13 support Panasonic Lumix Fz200 raw files?

Does PSE 12 and PSE 13 support Panasonic Lumix Fz200 raw files?

Yes.
See that FAQ: Photoshop Elements FAQ List
In that list you find:
FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?
And in that paper, you find two links, one for supported cameras:
https://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
and ACR versions compatible with different Elements versions:
https://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

Canon CR2 Raw files won't open in Photoshop CS4

I'm using a Canon EOS 600D (aka EOS Kiss X5), Photoshop CS4 (ver 11.0.1) with Camera Raw 5.7.0.213.
CR2 Raw files won't open in Photoshop, though the thumbnails are clearly visible and open in Windows Explorer.
Any suggestions?
Thanks

Yes, absolutely all of the quality and dynamic range is retained in the DNG, because it is still raw data.
Outside of upgrading to Photoshop CS5, which can open your files directly with Camera Raw 6.4.1, your only choice is the extra step of converting the .CR2 files to .DNG with the free DNG converter.
While you'll get all the quality your Camera Raw 5.x converter can deliver, you should keep in mind the Camera Raw 6.x converter has an entirely new, additional "2010 process" for converting raw images, which (depending on your settings) can actually deliver a higher quality conversion than the one you're getting with Photoshop CS4. I think it's worth the cost of the Photoshop upgrade, personally.
-Noel

After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and conver

After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and convert raw files. MacBook Pro with Snow Leopard. No such problem before this reinstallation.

You should install Camera Raw 4.6.
Visit this page and follow the instructions carefully:
PC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4039
-Noel

D800 RAW files will not open in Photoshop CS6

I have just installed the CS6 upgrade to Photoshop CS4 Extended, but now the software will not read the RAW files from my D800.
I have followed Adobe's instructions to check that I have the correct RAW plug-in (7.0.0.308) which I have. I have uninstalled the software and reinstalled the software without success. I do not want to convert my RAW files into DNG files, so I have ignored that step.
The 'Open in Photoshop' instruction in Lightroom 4 does not open my D800 RAW files either, although the files can be opened in Lightroom 4 OK.
Any idea what the problem is?

Brilliant! ACR 7.1 Beta allows D800 RAW files to be opened within CS6 and it also allows Photoshop 4 to open D800 RAW files in Photoshop CS6.
It says that the Beta version will expire on 30/6/2012 after which it will keep advising on a daily basis although it will still work. Any idea, what happens next? Does Adobe issue a proper ACR 7.1 and distribute it as part of the update service?

•Canon EOS 5D Mark II Raw Files Won't Open?

I use PE 11 and normally shoot with Nikon cameras. I recently used a friend's Canon #EOS 5D Mark II and the Canon Raw files will not open. I found a Camera Raw plug-in (5.2) that addresses this but am concerned this plug-in will override the camera raw plug-in already installed to read my Nikon files. Is this a valid concern?

Thanks for your response. What I think the problem was had to do with a couple of corrupted files. The jpg versions displayed correctly but the raw files did nothing when they were selected. I deleted 4 files that would not display and then randomly selected another which did. All the remainder of 46 files display in PE. I might have a bad CF card on my hands even though it is new. I’ll send it to Lexar for examination.
Good to know the question forum works. Thanks.

I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

Alternatively, install & use RawTherapee instead to develop your raw files instead (free and open source).
http://rawtherapee.com/

I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?

I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?
My Photoshop says it is up to date, but I am hoping that since this camera just came out, Adobe will have an raw file update soon.

DNG Converter is FREE. Yes, really. No subscription needed.
- Baloney, NOT FREE, it's a proprietary software, not open AT ALL, see Legal Notices, so stop trying to distort the truth here.
Camera Raw (& DNG Converter) 8.7RC has been available since 2nd October, and opens D750 files in Photoshop & Bridge (& Lightroom using DNG Converter).
Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs
- Still a cumbersome process for this of us that PAID for software and support, the whole point of this discussion is to implement this directly on LR, so we, the PAYING users don't have to waste time doing a useless process that could be EASILY AVOIDED ig Adobe released updates as they are needed, or if they OPENED THE SOURCE CODE so the community could do it.
Adobe created DNG, which is a well-documented backwards-compatible format, which is free for any manufacturer to use.
See here for manufacturers who do (it's an old list, but you get the idea):
http://www.barrypearson.co.uk/articles/dng/products_cameras.htm
- Really? Did you actually read the site? It has PRECIOUS information that illustrate my point: Adobe DNG is an attempt to stop the OpenSource community from achieving the goals of OpenRaw, which is TRUE OPENNESS, Again, Adobe is trying to get manufacturers to PAY LICENSING so they use a PROPRIETARY FORMAT that will HOLD CUSTOMERS on a PAID platform. OpenRaw is he answer for a true competitive environment.
Ask yourself why other manufacturers don't use a documented backwards-compatible format.
- Easy, because they are lazy and want kick-back. The SAME answer that I (and the entire OS community) would give if you asked about Acrobat or MS Office.
If you use a particular piece of software as your main tool, and you buy a camera which isn't yet supported by it, it's your problem. There is an expression used in the industry:
"Poor Planning on your part does not constitute an Emergency on my part."
- I agree here, it's MY PROBLEM that I decided to have a better product, it was my choice. I can still use OS Tools, which will be what I do moving forward, and about that expression, that is EXACTLY why Adobe will keep loosing customers, because the sense of urgency to help who pays their bills is inexistent. You are correct, why should they rush something so simple to help a customer right? Screw the customer... Thanks for making my point...

I have reinstalled cc and vhen i want to open a raw-fil the picture opens in PS CS5 insted of in CC2014. How kan i connekt my raw files to CC2014

I have reinstalled cc and when i want to open a raw-fil the picture opens in PS CS5 insted of in CC2014.
How can i connect my raw-files to CC2014?

You should have Bridge CC installed for CC 2014.
In Windows, right-click on a raw file, and select "choose default program". Photoshop CC 2014 should be listed. Select it. "Always open this file with this program" should also be checkmarked.
If CC 2014 is not on the list, look for the Browse button at the bottom and go to Program Files > Adobe > Adobe Photoshop CC2014 and click on the Photoshop CC 2014.exe to choose it and add to the list.
In Bridge CC Edit > Preferences > File Type Associations, look for your raw file type (CR2 or Nef) and select Photoshop CC 2014 deom the drop-down menu.
Gene

I bought a Nikon D810 and the RAW files will not open in Photoshop 6. Can anyone help me?

I bought a Nikon D810 and the RAW files will not open in Photoshop 6. Can anyone help me?

You're welcome! It's usually CS5 and below that has the ACR update problems.
What counts is that you are back in business.
Gene

Are Bridge and Mini Bridge and Camera Raw part of PS?

1.) Are Bridge and Mini Bridge and Camera Raw part of PS? OR do they also come with other programs in the Adobe software suite?
2.) What is the difference between Bridge and Mini Bridge?
Thanks.

1.) The Bridge application is included in the Photoshop installer, as well as some other Adobe products.(more info: http://www.adobe.com/products/creativesuite/bridge/?promoid=GWELP). The Mini Bridge extension is only included in Photoshop CS5, and InDesign CS5. The Photoshop Camera Raw plug-in is shared by Photoshop, and Bridge (and is also found in Photoshop Elements).
2.) Bridge is a separate application, whereas Mini Bridge is a panel that's hosted by the Photoshop or InDesign application. Bridge has a fuller feature set than Mini Bridge and can be used by itself. Mini Bridge needs Bridge to create thumbnails, keep files synchronized, and perform other tasks, but operates in the context of the Ps or ID host application (ie. drag/drop multiple assets into working document w/o losing document view).
Online version of Mini Bridge Help: http://help.adobe.com/en_US/creativesuite/cs/using/WS4bebcd66a74275c33c28e88f1235296fe93-8 000.html
regards,
steve

Open iphoto folder in mini bridge

I can navigate through my HD to my image and I know the path - however when I open bridge or mini bridge in InDesign it is not there. How can I use an image from within my iPhoto Library in In-design mini bridge?
PS Please dont point me to the tutorial - I have watched that!

The iPhoto Library on the Macintosh is not stored as a searchable folder when you view it from the Finder on the Macintosh. Nor can Bridge or MiniBridge view the images within it. (If you look at it in the Finder it's a single file, and I believe the Macintosh stores it as a "package" file, a container file for the images.)
If you want to place files from iPhoto, you have two options. You can open iPhoto, and you can export out the images you need. Or, you can use the Place command in InDesign. The Macintosh does give access to media in the iPhoto library (and I think movie files) in Open and Place dialogs (but Open wouldn't work in InDesign). As you see in the illustration below, at the bottom of the sidebar is a section that includes "Photos" and that previews images from the iPhoto Library in InDesign.

I have adobe cs6 and I can't get bridge or mini bridge open. All I get is "waiting for bridge." can anyone help?

I have adobe cs6 and I can't get bridge or mini bridge open. All I get is "waiting for bridge." can anyone help?

This tech doc should help. Simply try out each step one at a time until it works.
Error: Waiting for Bridge | Mini Bridge panel
Gene

Since I broght Ps6 for Mac, Bridge does not open and crashes. Mini Bridge, however works fine. What should I do?

Since I broght (in Adobe Store) Ps6 for Mac, Bridge does not open and crashes. Mini Bridge, however works fine. What should I do?

When I click gelsonhelmoldmacieira1 (me) in the Finder, I do not see the Library:
The Library (Biblioteca) only appears when I click Macintosh HD:
Following this path, I add gelsonhelmoldmacieira1 to the others in Photoshop, Bridge and Adobe:
It seems that something is still wrong. The error message appears again.

Lumix FZ150 Raw files aren't opening in Bridge or Mini Bridge in PS CS5

Similar Messages

Maybe you are looking for