LUMIX LX3 .rw2 files are not being recognized in LR 3.6

I have ACR 6.0.6 -
any ideas on what could be happening?
the error I get says - can not import photo. When in the import dialog.
Lightroom version: 3.6 [795620]
Operating system: Windows 7 Home Premium Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Physical processor count: 8
Processor speed: 2.1 GHz
Built-in memory: 12235.8 MB
Real memory available to Lightroom: 12235.8 MB
Real memory used by Lightroom: 1877.9 MB (15.3%)
Virtual memory used by Lightroom: 2086.7 MB
Memory cache size: 1945.6 MB
System DPI setting: 120 DPI
Desktop composition enabled: Yes
Displays: 1) 1920x1080

From external HD -
Yes, I have been able to import/view them before.
Originally imported from card reader. (was on Vista 64 Home Premium) -
Now, on Win 7 machine - (makes a diff.? I don't think it 'should'?)
see attached for the errors:
Thx Hal -

Similar Messages

Dwg files are not being recognized in Adobe Ilustrator CS6

I have a client that recently upgraded to Adobe Illustrator CS6 ver 16.0.0.0 and cannot open dwg files through the application. Has anyone seen this issue or have a fix?
Thank you
cgervasio

DWG files from where? Using what DWG format/ flavor? What system? What else? You need to be much more specific.
Mylenium

Some CD's with music burned to it, are not being recognized as having music files on them.

Some CD's with music burned to it, are not being recognized as having music files on them.

The format says Mac OS Extended. All of the settings were set during the disk image restore process. Even if I format the flash drive as extended journaled or some other format, all of these settings are reverted when I do the restore from the disk image. I will just copy all of the information that disk utility has so that you can see it.
Mount Point : /Volumes/Mac OS X Install ESD Capacity : 16.11 GB (16,106,110,976 Bytes) Format : Mac OS Extended Available : 12.3 GB (12,303,499,264 Bytes) Owners Enabled : Yes Used : 3.8 GB (3,802,611,712 Bytes) Number of Folders : 128 Number of Files : 876

HT1925 I cannot seem to delete apple soft ware from C/: program files/ common files...apple. It says I need permission, while I am the administrator. This seems to be interferring with my reinstallation of itunes. Currently my devices are not being recogn

I have been trying to remove all residual apple files from my computer in order to fully reinstall iTunes. My devices are not being recognized by iTunes currently. I keep finding an Apple file under C/: Program files/ common files/ ......Apple.. under that there is an Internet Services file folder.. I am the administrator and yet it says I need permission to remove these files.
Please advise.

See Troubleshooting issues with iTunes for Windows updates for some tips on cleaning up... Unlocker might be the tool in this case.
tt2

URLs are not being recognized inside PDF

URL links inside a PDF that I've created in InDesign CS5 are not being recognized.
I have email and website URLs embedded inside a PDF that was created in InDesign. These links are being recognized and I can click on them in Chrome, Opera, IE or Safari on the Mac. Eg, hovering over the mailto or http URLs the cursor turns to a hand and the links are clickable. Firefox is the only browser that does not recognize ANY links in the PDF. The cursor doesn't change to a hand instead it just remains as the standard text insertion cursor. The links are not clickable.
Firefox 26.0
Adobe Reader plugin 11.0.4.63 (latest as of today)

Current Firefox versions have enabled a built-in PDF Viewer that doesn't have all features that other PDF readers like the Adobe Reader have or may not function properly otherwise.
You can change the action for Portable Document Format (PDF) from Preview in Firefox to use another application like the Adobe Reader or set to Always Ask in "Firefox > Options/Preferences > Applications".
You can set the pdfjs.disabled pref to true on the <b>about:config</b> page to disable the build-in PDF viewer.
*http://kb.mozillazine.org/about:config
You can check the value of the plugin.disable_full_page_plugin_for_types pref on the about:config page and remove the application/pdf part if present or reset the pref to the default via the right-click context menu if you want to display PDF documents in Firefox with another application (i.e. not the built-in PDF Viewer).
See also:
*https://support.mozilla.org/kb/view-pdf-files-firefox-without-downloading-them
*https://bugzilla.mozilla.org/buglist.cgi?component=PDF%20Viewer&product=Firefox&query_format=advanced&order=bug_id%20DESC&limit=300
<i>Please do not comment in bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html</i>

Registrations for certain software are not being recognized by my Imac.

Registrations for software that require web based verifications are not being recognized by my iMac 27 2010 10.6.8
Included in the list of software that I have been using for some over a year now is FCE 4, Bias Peak, and Sibelius, and iRealb from the app store.
This is not a new issue although with the latest security update installed last week, the problem has been exacerbated.
I had the problem last year but found that if I shutdown (not just restarted) and then powered up again all my registrations would be recognized. Now my workaround no longer seems to work. I actually went for about 5 months with no problems and then occasionally I would have the shutdown/power up until last week.
I mirror the same software on my Macbook Pro 10.6.8 and have had no problems.
Thanks for any help.
Michael

I can add Kindle reader to the software list now. I used it last week and this week the cloud didn't recognize my computer.
Also on the iRealb app downloaded from the Apple app store I get a dialog that says the software was purchased on another computer (which it was, my laptop) and asks me to verify with my iTunes ID. I try to verify and it is unsuccessful, can not verify your computer.
MT

ALL OF MY FILES ARE NOT BEING SAVED WHEN I CLOSE FINAL CUT PRO X ?

ALL OF MY FILES ARE NOT BEING SAVED WHEN I CLOSE FINAL CUT PRO X ?

WHAT FILES AREN'T BEING SAVED? WHAT FILES ARE SAVED?

JavaScript files are not being updated while updating managed solution over Dynamics CRM Online

Hi Support,
While I am updating a managed solution over Dynamics CRM 2013 Online, JavaScript files are not being updated and is showing the source as of the last version of the managed solution.
I tried the same versions of solution on my CRM 2013 on-premise install (test organization) and it updated successfully.
This is a bit urgent issue. Please suggest how to resolve this.
Online version of the CRM is
Microsoft Dynamics® CRM Online Spring '14
(6.1.1.1855) (DB 6.1.1.1847)
blog: <a href="http://technologynotesforyou.wordpress.com">http://technologynotesforyou.wordpress.com</a> | skype: ali.net.pk

Our technical team managed to find the immediate cause for the problem, and a solution.
According to them there was a corruption on a speciffic OLAP file. By deleting it, they allowed it to be recreated on the next application processing. The file in question was found in \Microsoft SQL Server\MSSQL.2\OLAP\Data\UGF.0.db\<APPLICATION>.38.cub.xml
Where <APPLICATION> is the name of the problematic cube.
After that everything is working.

Images and .properties(bunldes) files are not being found from my JSPs

Hi,
I have created .ear file by using ANT Application. And deployed into Oracle9iAS(OC4J). Here problem is that images and .properties(internationalization bundles)files are not found from JSPs.
Here is my directory structure.
public_html--->locale -->BusinessEntity -->businessentity_en_US.properties
--->enterprise -->images -->knowldege.jpg
--->BusinessEntity-->BEAdd.jsp
in my jsp bundle(.properties)file is accessed like this:-
<i18n:bundle baseName="/locale/-->BusinessEntity/businessentity" id="businessentity" locale="<%= locale %>" />
in my jsp images accessed like this:-
src="/enterprise/images/knowldege.jpg".
In my working environment, without creating .ear file, images and .properties files are being found my JSPs. But if i create .ear file and after deploy, images and .properties files are not being found my JSPs.
please let me know where i might did wrong
thanks in advance
srinivas

Hi i am again. Here is my configuration files(server.xml and default-web-site.xml)
server.xml :-
<?xml version="1.0"?>
<!DOCTYPE application-server PUBLIC "-//Evermind//DTD Orion Application-server//EN" "http://xmlns.oracle.com/ias/dtds/application-server.dtd">
<application-server application-directory="../applications"
deployment-directory="../application-deployments"
>
     <library path="../tools.jar" />
     <rmi-config path="./rmi.xml" />
     <jms-config path="./jms.xml" />
     <log>
          <file path="../log/server.log" />
     </log>
     <transaction-config timeout="30000" />
     <global-application name="default" path="application.xml" />
     <application name="nalluri" path="../applications/trainiumear.ear" auto-start="true" />
     <global-web-app-config path="global-web-application.xml" />
     <web-site path="./default-web-site.xml" />
     <cluster id="-1640090707" />
</application-server>
default-web-site.xml:-
<?xml version="1.0"?>
<!DOCTYPE web-site PUBLIC "Orion Web-site" "http://xmlns.oracle.com/ias/dtds/web-site.dtd">
<web-site port="8888" display-name="Default Oracle9iAS Containers for J2EE Web Site">
     <default-web-app application="nalluri" name="Commonwar" />
     <access-log path="../log/default-web-access.log" />
</web-site>
thanks in advance
wating for reply
srinivas

MS Office 2007 files are not being indexed (Failed to Index) in oracle

Oracle is not able to index MS Office 2007 files who are having extensions like *.docx, *.pptx, *.xlsx. I googled and found that its a bug in oracle. Have they released the fixes for it.
Request to please help me in this regard

user10933671 wrote:
There is no particular error it shows. The files are not getting indexed. In our application it says currently *.docx files are not index. My Oracle client is of version 10.2.0.
Since am really new to this, can you please tell me where i can find Metalink note 732823 as am not a paid customer.
That would be a problem. Access to patches (and MetaLink) are part of what you pay for when you buy a support contract.
Plz help me in this regard
Thanks in advance
Edited by: user10933671 on Apr 15, 2009 5:53 AM

How can I add additional airport expresses to my system that are not being recognized by Airport utility?

I recently purchased time capsule to upgrade my wireless system. I have 3 airport expresses in my network; I was able to reconfigure one, but the other 2 won't reconfigure. They are not recognized by Airport utility after being reset; the time capsule and one reconfigured airport express shows up. I would like to use the other two airport expresses to extend my wireless system. I would appreciate any help and suggestions.

Unfortunately, you will have to use Apple's WDS setting for all of the devices on the network....Time Capsule, new AirPort Express and older AirPort Express devices.
That is going to slow things down tremendously on the network.
WDS only operates at "g" wireless speed, so you lose any "n" speed advantage of your newer devices.
Worse, the bandwidth is cut in half on the entire network for each device that is set up as "relay" or "remote" on the system.
So, the first "remote" (or relay) cuts wireless speed from 54 Mbps down to 27 Mbps. The second cuts everything down to about 14 Mbps and the third drops everything down to about 7 Mpbs. That is much slower than the old wireless "b" systems.
Compare that to "n" speeds of 130 Mbps or up to 300 Mbps (if you are using 5 GHz) and you can easily see that you are losing more than 90% of the speed capability on the network.
Do you even want to consider doing this?

Podcast explicit tags are not being recognized

I'm using Squarespace as my website host, and have followed their instructions to insert the iTunes Explicit tag into our feed before submitting to the iTunes store. Unfortunately, after extensive testing with Squarespace support, the tags are being read properly in the XML feed, but each time I attempt to submit via iTunes, the Explicit tag is not recognized. Any help would be greatly appreciated.
Here is a copy of the XML output (provided by Squarespace support)
https://img.skitch.com/20120328-t5g175qa2mf3wr3t86ay7rtmwr.png

1. Try resetting your SMC.
Resetting the System Management Controller >>
2. Your laser pickup could be dirty. You can buy a cleaner disc for that.
3. It may be the media you're using, but it nothing is recognized, it may be hardware related.
4. Run your hardware tester.
5. Is your optical drive being recognized in your System Profiler?
-Bmer
Mac Owners Support Group - Join us @ MacOSG.com
  Mac611 Mobile Mac Support - about.Mac611.com
   iTunes:MacOSG Podcast | YouTube.MacOSG.com
                   An Apple User Group 
Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

QT files are not being played at the right height on laptop - why?

Hello eveyone,
The QT files imported in my MacBook pro are HQ but are being played 1280 x 405 (for the length of the screen, but not at the right height). I can't even play view them with the Actual file feature. The Movie Inspector tells me the clipes were shot normal (1920x1080) yet I can't se them properly.
I tried on a different MacBook pro and I have the same problem.
Does anybody know why? What should I do?
Thanks!

Actually, there is no problem with the original files.
Since I do not know how you came to this conclusion or if it is correct, my first thought is, "Show me the proof." I.e., post a captured image of the "Inspector" window for the player you are currently using. This will tell me which QT player you are using, whether the display is controlled by scaled dimension or aspect ratio settings, whether the file was encoded anamorphically or non-anamorphically, and whether the encoded aspect ratio matches the current display aspect ratio. It won't tell me the true aspect ratio of the video but a look at people and objects in a single video frame will normally disclose whether or not the display aspect is reasonably close or not.
If I import them in say Final Cut Pro, I can see them properly...so it's only the Quick Time on our laptops that display the clips wrong.
This isn't really helpful since FCP has settings that allow the user to both change and scale display dimensions and aspect ratios. QT 7 Pro will allow you re-scale the aspect ratio of a display but not alter its encoded aspect ratio while QT X will allow you to resize the display scale but only in reference to its encoded aspect ratio. Neither will allow you to display a file at dimensions greater than your current video card settings (i.e., where actual dimensions are greater than screen display resolutions for the encoded aspect ratio). In a similar manner, "fit" and "fill" option availability will also depend on the device/player and available screen resolutions/aspect ratiios which you have yet to indicate for either platform previously mentioned.
The full length of the screen, but not the full height... Do you have any advide on how to get the settings done? I looked into the QT settings and coulnd't find the right button/panel...
As previously stated, the first step is to determine if the files are being displayed correctly—i.e., at their correct aspect ratio for the allowable display space available for the current screen resolution available on the platforms being used for viewing. For instance, are you viewing in the full screen mode, or with menu bar being displayed and/or with the dock in or out of active display. These settings plus the video card screen resolulution will determine the maximum number of viewing pixels available fort the display height. Once the scale height is set by the QT player, then QT app will scale the display width to what it believes is correct display setting. If the aspect of the display is correct for the scaled height and width, then the file is being displayed correctly at the maximum display height available and there is nothing wrong and nothing to be corrected either in the file or the media player other than your desire to play a file at dimenensions larger than available for your display. (I.e., this is equivlent to saying you want to display a 52 inch diagonal picture on 32 inch HDTV—"it ain't gonna happen."
On the other hand, if the aspect ratio is incorrect for the maximum display height available for the app, system, and platform being used for viewing, then all of the other things I mentioned come into effect with regard to correcting the embedded display settings within the file.
Example: If i take an anamorphically encoded 1440x1080 (1920x1080) file and display it on my monitor set to a resolution of 2560x1440, then I can display the file at its "actual" display size (1920x1080) or even scale it to 2560x1440 (Full Screen Display mode) but if I reset my monitor to a 4:3 aspect resolution of 1600x1200, then I cannot play the file at its actual 1920x1080 display resolution since its width is limited to 1600 pixels and when the 16:9 aspect ratio is applied to the 1600 pixel display width, the display height is limited to 900 pixels in a "Fit to screen mode."
If your source file was recorded at 1920x1080, then the file's aspect ratio is 16:9 (1.78:1). However, your 1280x405 screen size implies that either the file is now being displayed in the "Fit" mode with a changed aspect ratio of 3.16:1 (1280x405) or that you are viewing the file in the "Fill" mode which chops off the top and bottom of your 1280x720 (1.78:1) display. (I.e., the "Fit" mode will scale the display at its current aspect to fit within the available display area and yet allow you see the entire display area as a "scaled view at the correct aspect while the "Fill" mode scales the video to fill your entire screen even if this means losing the top/bottom or left/right portions of the display area when the monitor resolution aspect ratio and video display ratio are not the same.)
Therefore, if your file is correctly formatted as you claim, use the "Command-F" QT shortcut to view the file at its largest available dimensions at the correct aspect ratio on any platform and using either the QT X or QT 7 player. (Don't forget to set the QT 7 "Full Screen" preference.)

Files are not being copied to the bin-debug folder

All my assets swfs are in a folder named "assets/swf" under the "src" folder.
The "Copy non-embedded files to output folder" is checked. BUT the folder is not being copied to the bin-debug...
This is also true for Icons folder (Also under "src")
Any idea why?

Bump!
comon I can't be the only one with that problem...

Icc profiles are not being recognized by epson printer from LR 5 in Mac OS 10.10 yosemite

After switching to Mac OS 10.10 (Yosemite) my epson 3880 is no longer recognizing the icc profiles. Is anyone else having this issue?
I've already reinstalled all epson drivers and printer options to no avail. I'm thinking that lightroom and the printer are not communicating the icc profile info?

Striebig wrote:
I'm thinking that lightroom and the printer are not communicating the icc profile info?
That's not how it works. If LR does the color management, it converts the image from its working space (linear ProPhoto RGB) to the space defined by the ICC printer profile that you have designated in the Print module and sends to the printer that (converted) data. The printer driver should be set to "No Color Management" and therefore has no need to know the ICC profile. If you set LR to "Color Management: Managed by Printer", no profile is designated in LR, the data is sent unconverted, and you have to set the driver interface to the appropriate ICC profile - again no communication of the printer profile, although LR does send data that describes the working space so that the driver can make the conversion.

LUMIX LX3 .rw2 files are not being recognized in LR 3.6

Similar Messages

Maybe you are looking for