Lumix raw files are showing horrible green cast and not option

Hi, since upgrading Aperture to the current version, my new Pictures when shown the preview are ok, however when clicking on them they change to a horrible green. My files are RAW (.RW2) from a Panasonic Lumix GX1. Other thing, when checking in Adjustments, the RAW Fine Tuning Adjustment is greyed.
The ones from my Nikon D800 are good, that means, is not a general problem.

What is your MacOS X version? Your camera should be supported by MacOS X 10.7.4 or later, but your signature says 10.7.2?
If you have MacOS 10.7.4 or later, but Aperture does not recognize your camera, try to register the raw support for your camera with the launch services db, see this post by Alan Roseman:
Re: Aperture 3 preview of raw file greenish
But also read the following post, that explain how this is supposed to work and to correct the typo in the command
In short: Quit Aperture, open the terminal, paste the follwing text in (all in one single line) and hit return; then reboot the system.
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -R /System/Library/CoreServices/CoreTypes.bundle/Contents/Library
Regards
Leonie

Similar Messages

What do you do when your contacts with IPHONES or IPADS are not showing up in blue in IMESSAGE on my IPAD. The are showing up in RED and not allowing me to IMESSAGE them at all.

What do you do when your contacts with IPHONES or IPADS are not showing up in blue in IMESSAGE on my IPAD. The are showing up in RED and not allowing me to IMESSAGE them at all.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

My 5d Mark III raw files are showing up as CRAW2 not CR2?!

I have tried resetting my camera settings to default, formatting the CF cards, using multiple card readers...nothing is working and I can't seem to find any information on what a CRAW2 file is. I have also tried using a DNG converter to convert the files but that doesn't work either. No program recognized the raw file type.

Camera Raw Defaults are per camera and perhaps they are set strangely for the 5D.3 on your client’s computer. In particular check the Green channel in the Point curve in Toning Curve. I can easily create a very-magenta image by setting the toning curve to Point and selecting Green rather than RGB for the Channel and dragging the center of the curve all the way to the bottom to remove all green from the image. The camera profile might also be corrupt, which can be tested by switching to some of the others to see if they look ok.
You can isolate whether it is your camera, in particular, or any 5D.3 raw file by having your client download and look at a RAW file from the following page—by clicking on the word RAW under the 5D.3 image at the top left of the series on this page:
http://www.dpreview.com/reviews/canon-eos-5d-mark-iii/28
This is the direct download link to the ISO 100 studio image for the 5D.3 is:
http://movies.dpreview.com.s3.amazonaws.com/canon_eos5dmkiii/5D3_5199.CR2.zip
You might also try converting one of your CR2 files to DNG and make some adjustments, then update the preview and metadata into the DNG, so your client will be using your settings, rather than the defaults.

My CR2 files are being saved as PNG and not PSD

When I import files into Elements 12 Organizer, I want to use the Instant Fix Smart Fix option. The CR2 files are being exported to the PNG format, and I want them to be PSD files, I don't have a way to return to the options of how to save my files by using the Instant Fix button. I really would appreciate some help on this. I can't seem to get any tech support by navigating the Adobe Web site - I always land in the Forums.

In PSE12, whenever I want to use the smart fix option in the organizer for a raw file, I get a dialog with various format options and the possibility to check one of those formats by default. If I check the checkbox to always use that format and not to display the menu, I find myself in the same situation as yours.
I don't know of a way to get the menu back... Deleting the organizer preferences should help, unless other users have a better idea.

Photos are showing up in Places and not in my albums, organization.

I have the 3GS. I recently upgraded to the new software with the 4.0. It's really cool so far, except the fact that it took some of my photos out of already organized "albums" and put them into "places". I like the fact that they are recognized in the places section/tab. But I also would like to keep them in the album itself so I don't have to go searching for a specific picture that I know I have on the phone but can't find. It's just kinda a pain in the butt cause now my pictures are kinda all over my phone between "albums" and "places". And some of the places location are really off by saying some were taken in a different town when they weren't. Is there any way to reorganize them.

The photo streams are not available at the icloud.com site. The are only available on mobile devices or Macs with iCloud capatible iPhoto. If you create shared photo streams they will be online but at their specifie URL and not at icloud.com.
OT

When I go to iCloud it shows a green padlock and not my name, why is that?

I just got a iPad for Christmas and played around taking pics through photo stream. I read how to reset but when I go to the cloud my name is not on the page to reset instead a green padlock. I am lost and not tech savvy so any help is appreciated.

leisly wrote:
Ohhh Really OOKayy Then thanks for the help i guess , well im buying one from my friend that is broken well its not roken like crack but she dropped it and it doesnt work if i take it to the mac store will they fix it without charge?
No, accidental damage is not covered under warranty, expect to pay.

The camera raw button in Adobe Bridge has quit working and all my camera raw files are hidden by a c

The Camera Raw button in my Adobe Bridge has quit working and all my raw files are hidden by a cover that says PEF and has a camera raw icon on it. I can open the files in camera raw if I double click on the file but I want to see the files and be able to use the camera raw button. How can I fix it?

This means you have not the correct ACR plug in to support your PEF files or no ACR plug in installed at all.
In photoshop go to the menu Photoshop / About Plug ins / Camera Raw.
Here should be showing the version number of your ACR plug in (only 1 version should show btw)
Then go to this site and check wether your camera is listed and what minimal version you need to open the files:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

I have Lightroom 4.4 and a Nikon d800 with firmware upgrade 2.005. raw files are now since upgrade, unreadable. any plugins or advice? Thanks

I have Lightroom 4.4 and a Nikon d800 with firmware upgrade 2.005. raw files are now since upgrade, unreadable. any plugins or advice? Thanks

I select the images I want uploaded, NEF files, click the "IMPORT" button, process bar comes up and shows work in progress, but no progress. after about 2 minutes, dialogue box appears with message: "unable to import because the following files are unreadable: NEFxxxx, etc."

Lumix Raw Files

I have just purchased a Lumix DMC LX3 camera. Great camera, but the raw files are not yet supported by Lightroom 2 or Camera Raw. Any way around this?

Not until the next update of Lightroom. Since Photokina is round the corner, the crystal ball would suggest an update after (to cater for the cameras released there).

How to Delete imported JPEGS after matching RAW files are imported as masters

Using a 5D Mark III and shoot JPEG (SD) and RAW (CF).
Aperture 3.5.1, using a managed library
Perviously, using a 7D so new to shooting JPEG and RAWs from an aperture Aperture workflow standpoint.
I know that i can import the JPEGs > delete images that do not make the cut > then import the matching RAW files in the import dialogue that correspond to the JPEGs in the Aperture Library.
I use the RAW files as my Camera Master images and once the RAW files are imported, the smaller resolution JPEGs are no longer needed or viewed in my normal edit workflow. I only need the JPEGs to quickly go through the images to find out which RAW files i need to import at a later time to increase the speed of import > edit > deliver.
My Assumptions:
1. Logic would lead me to believe that after import the user should see a stack like image representation with whatever file type is considered Master to be on top and the viewable secondary file type on the bottom. clicking on the image stack should allow you to see both file types as you would normally see with image stacks with the same files types. This is not the case... What am i missing here?
2. Logic again would lead me to believe that when i have the ability to delete one of the 2 image types as i do not need both in the end. After the import process is complete and RAWs are backed up, I want to delete the JPEG files as they are just taking up more space on my DAS drive array... There is no need to keep a duplicate of every file in both JPEG and RAW format. This is not the case as when i delete the JPEG or RAW, both files formats are deleted simultaneously. What am i missing here?
Problems: (correspond to Assumptions above)
1. I do not seem to have access to both images (JPEG & RAW) in a stack where i can expand and close the stack to see both? It seems like i only have access to the image type i have selected as Master? This seems counter intuitive to what the workflow should be as why would aperture 'lock the secondary file types away' so you can't easily view both file types as the same time for comparison?
2a. Reality seems to be that i do not have access to the JPEG and RAW image files. I can only see one at a time by selecting the images and choosing 'make JPEG master’ and then respectively... 'make RAW master', but you can't see both at the same time for file comparison.
2b. Also, I can't find a way to delete the JPEG images after the RAW files have been imported. I would presume most professional photographers shoot RAW and do not shoot JPEG as their camera master or editing master images. I do not understand why aperture has captured both as a pair in the library that does not allow me to delete the JPEG (in this case) as i have selected the RAW as my master.
If someone can please help... The function seems like either i am missing something obvious or that the implemented function of using RAW + JPEGs files for import is broken from a real world workflow standpoint.

leonie...
thank you for clearing that up for me.
I think that at this point it is silly to use the JPEG+RAW import functionality as it seems that it takes longer to do the above steps than to just import only the RAW files and press on from there.
I seems what i have done in the past of only importing the RAW files and then using the quick preview functionality to reduce image load times is the best thing in can come up with without keeping 'duplicates' in the database.
That really baffels me that there is no built in functionality to remove the JPEG from a RAW+JPEG pair and i wonder how the real world photographers who help Apple test and implement software to solve real world workflow problems thought the JPEG+RAW import was going to be used.
I do understand that i can use a smaller JPEG file size to reduce the bloat of the database, but used over hundreds of thousands of images is certainly going to make a dent in my total aperture database size and therefore storage needs down the road.
If you have any other workflow thoughts, or know of a 3rd party plugin/ etc... to fix this obvious shortcoming then i am all ears..
thank you again Leonie and have a great week

I'm running LR 4.4. Just picked up a Sony RX100 M3 cam. It's RAW files are not supported within my version. Is there a free update still available for my version or do I need to purchase an upgrade to LR5?

I'm running LR 4.4. Just picked up a Sony RX100 M3 cam. It's RAW files are not supported within my version. Is there a free update still available for my version or do I need to purchase an upgrade to LR 5?

Camera Raw plug-in | Supported cameras
The Sony RX100 III was first supported in Lightroom 5.5.
There will be no updates for older versions.
So your choices:
Upgrade to Lightroom 5, or
Download the free Adobe DNG converter, convert all Raw files from the RX100 III to DNG format then edit the DNGs in Lightroom 4.4
Photoshop Help | Digital Negative (DNG)

I have photoshop CS5 extended on my PC; some days ago I had to substitute Windows 7 so I installed Windows 8. Since then my RAW files are not supported by CS5, I cannot see them anymore

PROBLEM WITH RAW FILES with WINDOWS 8.
I have photoshop CS5 extended on my PC; some days ago I had to substitute Windows 7 so I installed Windows 8. Since then my files RAW are not supported by CS5, I cannot see them anymore

Your answer has been very useful. I have made ACR update and now my RAW files are normally supported and visible.
Great !
Thank you very much ...

How do I open CS4 files after Upgrading to Cloud? The older files are showing up gray and won't open

How do I open CS4 files after Upgrading to Cloud? The older files are showing up gray and won't open.

InDesign files are compatible wih all the newer versions. A cs4 file sh
Could you answer a few questions to help us better understand the issue:
If you are trying to open the files by double clicking them, do they give any error??
Have you tried to drag a file into indeisgn, if yes what happends when you do that??
Is there any error message that you get??
Also if you create a new files in InDesign CC does it show up as grey like the cs4 files or do they open fine??

I have just updated to LR5. I also have a new Camera. Nikon D800. Trying to import directly (from camera) into LR. But unsuccessful. Getting the following message. "The files are from a camera which is not recognised by the raw format support in Ligh

I have just updated to LR5. I also have a new Camera. Nikon D800. Trying to import directly (from camera) into LR. But unsuccessful. Getting the following message. "The files are from a camera which is not recognised by the raw format support in Lightroom." How can I import please?

Hi,
I assume you mean the Nikon D810 because D800/800E support has been there since Lightroom 4.1
Currently, because it is a new camera (D810) the only support is in a RC of ACR 8.6 for Photoshop CS6 and CC, as the RC runs out on 31 August it is expected support will be there in the next dot release of Lightroom.
Current limitations are that only full sized NEF is supported.
If you wish to import to Lightroom 5.5. you will need to download the DNG Converter v8.6RC and convert the NEF files (full size RAW ony) to DNG then import into Lightroom 5.5

RAW files are often unnecessary, but then, you never know.

I've decided to use both Raw and SQH (Olympus jpeg) when I take a shot because RAW files are often unnecessary, but then, you never know. Anyway, Aperture imports both versions as one would expect, and I can switch between versions by using a right click pull down and select either the JPEG or the RAW as original but my problem is that I can't see both at once, anywhere. I can't remove only one and it appears that if I trash either one they will both be gone.
What settings am I missing to import both version of the file as separate and visible and selectable images?

Read this page in the User Manual:
http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=4%26sec tion=6%26tasks=true
To import the RAW and JPEG image files as separate masters: Choose “Both (Separate Masters).”
Note that you can import just JPGs, and then later go back and get the RAWs (assuming you save them).
My advice is to switch to RAW only (unless you work on stringent deadlines).

Lumix raw files are showing horrible green cast and not option

Similar Messages

Maybe you are looking for