Lumps on top of lid (screen)

I've noticed that my new MBP has three small lumps (or bumps) on the lid of the screen.
Looking at the lid from the back...two are right at the bottom about 1" from both corners. The second is at the top about 1-2 inches from the left.
You have to look pretty close and look at it from an angle.
Anyone else notice this, or is this (I use the term lightly) a defect?

I've noticed that my new MBP has three small lumps
(or bumps) on the lid of the screen.
Looking at the lid from the back...two are right at
the bottom about 1" from both corners. The second is
at the top about 1-2 inches from the left.
You have to look pretty close and look at it from an
angle.
Anyone else notice this, or is this (I use the term
lightly) a defect?
Has to be a defect I don't have that on mine.
William

Similar Messages

  • Hi. I have a 2008 macbook pro 15.4 inch. Not abused but the hinge is stiff and the lid/ screen is starting to de-laminate at the bottom edge. Any ideas on how to make the hinge work a little more freely and how to re-seal the screen to the lid?

    Hi. I have a 2008 macbook pro 15.4 inch. Not abused but the hinge is stiff and the lid/ screen is starting to de-laminate at the bottom edge. Any ideas on how to make the hinge work a little more freely and how to re-seal the screen to the lid?

    When you have kernel panics, the pertinent information is in the panic report.
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

  • How do I remove side bar and go back to tabbed browsing across the top of the screen?

    I update firefox and was asked how I wanted tabs displayed. I orignally had new tabs opening across the top of the screen but changed a setting so they came up on the sidebar. I want to go back to tabs across the top of the screen but can't find how to do this.

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    # Shockwave Flash 10.1 r82
    # Next Generation Java Plug-in 1.6.0_14 for Mozilla browsers
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • I tried using the Voice Memos iPhone app and ended up with a red banner on top of the screen that flashes "recording 00.00" but I can't locate what I thought I was recording.  can you help me?

    I tried using the Voice Memos iPhone app and ended up with a red banner on top of the screen that flashes "recording 00.00" but I can't locate what I thought I was recording.  can you help me?
    jacknil

    I found an answer to this on another page (I was having the same problem) This worked for me:
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    more here: https://discussions.apple.com/thread/5596831

  • I am using Mail for emails and I seem to have two different windows that switch between the two.  The emails are the same but the second window opens when I click on any details and I cannot see the top of my screen with control icons for internet, file

    I am not very tech savy and apologize in advance if my question is not clear.  I use the Mail application on my mac and I have two users on my computer, one for gmail and another for my work email.  All email addresses appear in the mail application on one page.  When I open my email and click on a message it often goes to the other user screen and cuts off the top of my screen which shows the bar for Chrome, file, edit, view, history etc....Still functional but very annoying.  How do I choose a user screen and stop having it switch back and forth. 
    Thank you.

    Mail troubleshooting - Yosemite
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages
    SMTP servers keep going offline

  • When i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please  help me?

    when i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please  help me?

    Have you upgraded to iPhoto 9.6 for compatibility with Yosemite? If not, try that first.
    It looks like iPhoto has lost the connection between the thumbnails and the original image files.
    This can be caused by a corrupted iPhoto library, or the originals have been deleted or moved.
    Try first to rebuild your iPhoto Library:
    If you do not have a current backup of the iPhoto library, make a copy of the library, but do not overwrite any previous backup.
    Launch iPhoto with the ⌥⌘-key combination (option-command) held down.
    Select "rebuild" from the first aid panel.  This may take a while for a large library.
    Can you now see your photos again?
    If not, rebuild the library with iPhoto Library manager as described by Old Toad:            Re: iphoto crashed

  • I cannot get the info bar (not the dock) on the top of my screen to permanently appear without my having to put the cursor on top of screen. Then it appears. Don't even know what that is called...above the open window.

    How do I get the area above the open window to display information (as in closing that specific window, "Safari  File Edit View History, etc.) without having to attempt to put the cursor on it to give me that info? I am not referring to the dock which is at the bottom of my screen. Although,It too, is not  visible.
    They were both visible before today.
    Sorry, but I have no clue as to what this topic should be.

    When you do Safari to it's maximum size on the screen (with the two little arrows in the Safari top menu bar on the right), Safari will take the whole screen including the top Apple menubar. In that menubar is the same set of little arrows to bring Safari back to it's previous size (which you can set by moving it's borders), you bring the Apple menubar in sight by moving the mousepointer to the top of the screen, when you do not want to loose that apple menubar, you can set Safari as bog as you can by moving its borders but just until below the apple menubar. Don't touch the little arrows in Safari menubar.

  • After downloading the latest version of Firefox I am unable to display more than one website at a time in the tool bar at the top of my screen.

    Before I upgrades to your latest version I was able to display many websites at the same time in the tool bar at the top of my screen. Now I can only display one at a time and it is extremely annoying.

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
    <b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
    Please report back to see if this helped you!
    Thank you.

  • Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal

    Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal Pre icon, File, Edit, Clip, etc.
    I am planning on purchasing Premier Elements 13, would it be better if I bought a new program rather than download an upgrade, just in case the upgrade doesn't load properly due to the error with my existing program?
    If I the deleted Premier Elements 9 on my PC would I lose all my existing videos that were produced using Premier Elements 9 or would they be saved so that they can still be worked on in Premier Elements 13?
    Does Premier Elements 13 work with Windows 7?
    Thanks
    Terry

    Premiere Elements 13 absolutely works with Windows 7!
    In fact, I'd highly recommend you download the free trial and give it a test run.
    Meantime, go to Windows Update and make sure you have all of the latest Windows updates, including those that don't install automatically. Then go to the nVidia or ATI site and ensure you have the latest driver for your graphics card, and go to Apple.com and ensure you have the latest version of Quicktime, per the program's requirements.

  • When I click on a link in an email I get the following message at the top of the screen: "Firefox prevented this page from automatically redirecting to another page...[Allow]. How can I stop this?

    When I click on a link in an email using gmail in the Mozilla brower, I get the following message at the top of the screen:
    "Firefox prevented this page from automatically redirecting to another page...[Allow].
    How can I stop this?

    # Press Alt+T
    # Select Options
    # Select Advanced Panel
    # Select General Tab
    # You will see option "Warn me when websites try to redirect or reload page"
    # Uncheck it as given in the screenshot.
    <img src=http://dl.dropbox.com/u/7456129/Firefox/advancedgeneraltab.jpg width=600px height=600px>
    ''<hr>Note: If anyone's reply has solved your problem, then please mark that reply as "Solved It" to the right of that reply after logging in your account. It will help us to concentrate on new questions.''

  • Has anybody else been seeing (Not Responding) at the top of the screen and having thier browser not respond to wheel scrolling and scrolling with the usual slider at the right part of the screen?

    I have noticed my Firefox browser is having way too many incidences where it is "Not Responding". The browser freezes up for a second quite often and the "Not Responding" message will appear at the top of the screen.
    The browser will also not scroll with either the scroll bar on the right nor with the mouse wheel. Both used to work in previous versions of Firefox, but it seems to have gotten worse since Firefox 5 0r 6. The same with the "Not Responding". It is happening more with Firefox 7 than in at least the past two versions.
    Anybody else having these issues? Seems like they are hand-in-hand. Thanks for any and all help or advice. It's making me pretty angry since I'm online all day for work.
    Just an FYI. At the bottom of my troubleshooting copy/paste is a suggestion to update the driver for my graphics. That was a no-go. I tried that.

    Thank you for this first reply! I'll have to give this a try later....the main laptop I experience this on crashed not more than an hour after I posted this issue. I'm on a tiny, slow netbook that hasn't had the same problem. Now I'm wondering if I picked up a Trojan on the main laptop and the "Not Responding" message is a side effect of a virus or Trojan.
    One of the system .dll files has been corrupted and I'm not being allowed to use recovery discs, previous disc images, or any recovery options. That was an all day sucker yesterday and from what I've read on forums and have researched, it appears I'm going to need to reload the operating system. If it is indeed a Trojan/virus, I'm surprised it made it through my antivirus and firewall. Anything is possible, really.
    Thanks again, I'll get back with results once I get the wounded laptop back up and running.

  • Most websites, including Mozilla, now have a locked banner at the top of the screen that blocks off some, or much more of my laptop screen, how can I stop this

    Apparently we have forgotten how to scroll up to find the search field, donate button, etc. and website "designers" now include a locked banner at the top of your screen that you cannot close but remains in place as you scroll through what remains of the visible field to view half pictures, partial paragraphs, etc. Some of these are enormous, most of a middle size and some are thinner. None are necessary but fit neatly under the heading, "Just because you can does not mean you should." which programmers seem to disregard at will. Is there some way for me to maintain (re-establish) my possession of my desktop when visiting sites? These stupid and obstructive are unneeded and Mozilla ought to be ashamed that I am looking at "Mozilla support" at the upper left of my desktop, yes, I know I am in Mozilla support and haven't forgotten it since I got here, and "ÏNBOX" "Search Mozilla Support" at the upper right of my desktop. I haven't forgotten how to scroll up if I needed to search support, either...

    We are simultaneously getting bigger and bigger monitors and smaller and smaller handhelds, so it's a challenge to serve the right page for your display. But I digress...
    Those fixed bars are created using the style rule <code>position:fixed</code>. In some cases, the rule is added dynamically when you scroll the page, while in other cases, it is fixed full-time. Because you may actually want some elements to be fixed, it is difficult to create a fix-all solution that will work well for all sites.
    For ad hoc page hacking, you could try this extension that allows removal of items using the right-click context menu:
    https://addons.mozilla.org/firefox/addon/nuke-anything-enhanced/
    Sometimes it might take two clicks to find the outermost element (otherwise, you might leave a blank area instead of getting rid of the whole thing.
    Some users use the Adblock Plus extension to hide page elements they don't want to see; I don't have any experience with that.
    If there are particular sites you need help with, we might be able to create a custom style rule for you to override the way the page behaves. The best approach depends on exactly how it works.

  • New bar at the top of the screen

    With the new upgrade to Android version 4.0.4, there now appears to be another bar at the top of the screen.  I haven't been able to find any description of what this bar is/does.  Looking for a link to documentation about this new feature.

        Gene1234, updates can be fun and interesting, but some new things can be confusing as well. Does the bar say Google? If so, that would be a Google search bar. If not, is this bar on the screen at all times? Is it at the very top by the notification panel? If you're referring to an icon after you pull down the notification panel, this could be the Settings icon. What happens when you tap the bar?
    MarquiaF_VZW
    Follow us on Twitter @VZWSupport

  • [SOLVED]Creating a gap at the top of the screen in DWM / Dzen2

    I've messed around with this for a couple days to no avail. I'd like to create a small gap at the top of the screen in dwm 6.0 (replacing dwm's topbar) so I can insert a dzen status bar. I'm pretty new to editing dwm.c, but from my google-fu have found that the answer lies somewhere in the setup() and updategeom() functions. Any other relevant information is only applicable to earlier versions of dwm.
    So, can anyone help me out, or atleast point me in the right direction? I understand this might be possible through xmonad, but would like to avoid that if there's a chance.
    Last edited by thecarrotstick (2013-06-27 22:57:33)

    Trilby wrote:If you really want to replace dwm's bar, then you don't need to do anything - just have dzen over dwm's bar.  If you wanted to make it as efficient as possible, you could delete the function that draws the bar (or probably more easily just delete it's contents so it is an empty function).
    That actually worked to some effect, I was so OCD about it being clean I didn't want to paint over the original bar, but just deleting the function that draws it doesn't seem to have removed the gap where it used to be. This solution also allows me the ability to hide it as well.
    So thanks, I'm pretty happy with these results.

  • I was messing with the computer, not sure what i hit but now all my toolbars at the top of the screen are gone? (file, edit, history, tools and my forward and back button). Please help me get these settings back to the way they were?

    My file, edit, view, history, bookmarks, tools, and help buttons at the top of the screen are gone, along with my forward and back button.

    For details of how to restore it, see https://support.mozilla.com/kb/menu+bar+is+missing
    Once the menu bar is restored, you can use the Toolbars entry in the View menu to restore other toolbars such as the navigation toolbar.

Maybe you are looking for

  • Unable to connect to website losing connection and the result is displayed as Secure Connection Failed (Error code: ssl_error_access_denied_alert)

    Secure Connection Failed An error occurred during a connection to website name Peer received a valid certificate, but access was denied. (Error code: ssl_error_access_denied_alert) # The page you are trying to view can not be shown because the authen

  • Problem deleting Infoobject.

    I am trying to cleanup some legacy InfoObjects. When I go to delete the InfoObject, I get the error that it could not be deleted b/c its still used. In the detail of the log, I get the message its still referenced. Specifcially this: Data element /BI

  • Unknown disk2 in Disk Utility

    Hi! There ia an unknown "disk2" in Disk Utility. When I check for Information I see: Name : disk2 Type : Disk Image Disk Identifier : disk2 Media Name : Apple read/write Media Connection Bus : Disk Image Full Path : Not mounted Partition Map Scheme :

  • LAF Package Table Frame Issues

    I have successfully implemented Francois' LAF package (Thanks very much, Fancois!) and am adapting the functionality to make our forms look more web-like, but I am having a few problems. First, I am having a problem where the table frames (header and

  • How to use Session ID info to send sequent requests to Https Server ?

    Hey , Gurus! Another problem for your talents : By using InputStream , I gain all info sent back from the Https server . And Session ID info is included , such as Session ID: {130, 17, 0, 0, 130, 170, 25, 235, 97, 13, 66, 95, 24, 241, 214, 8, 121, 21