"LUN Map requires repair" on re-start
All,
I have been having this problem for several months. I work in a facility where shutting down everything over the weekend is required. One of those devices is an XServe RAID. When it comes back up one side always fails with the message "LUN map requires repair". Additionally, the same controller that exhibits this issue is also unable to accept time updates, and displays an extremely odd date (e.g. 1/30/16). I have attempted re-seating the controller (nothing) and swapping controllers (the problem followed). Anyone have any ideas?
It's an XServe RAID running firmware 1.5.1/1.5.1c
Thanks.
Mac OS X (10.3.9) XServe RAID firmware 1.5.1/1.5.1c
What's your "shut down" process? Are you turning off all attached computers, or at least unmounting the RAID volumes, and the shutting down the RAID using the RAID Admin tool?
Does the power get physically cut during this down time?
Why is shutting down necessary? And any chance of getting an exception?
=Tod
Similar Messages
-
aperture 3.2.4, macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks
“Hi Kirby, thanks a lot for your answer.
I got one answer, from DMoore, saying:
“Try Safe boot and then restart with only Aperture open. Still doent work write back with more details like Ram, HD capacity/free space. Are these thumbnails or Previews? Have you turned off building previews in AP preferances?
Safe boot http://support.apple.com/kb/HT1564
Starting up into Safe Mode does several things:
1 It forces a directory check of the startup volume.
2 It loads only required kernel extensions (some of the items in /System/Library/Extensions).
3 In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
4 It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
5 It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
6 It disables all startup items and login items (Mac OS X v10.4 or later).
7 Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.”
As I don’t know much about the technical aspects of computers, I don’t really understand the first answer, and it sounds like following it might produce unwanted changes.
But I understand your questions, so I’ll try to answer them;
"loading from any Project" means that I encounter the problem when I’m using a project, possibly after/because I’ve left the Mac on overnight, and/or I’ve made a lot of adjustments, and, once the problem is there, it happens in any other project which I open – the images load then disappear.
I can see images in the Browser, so it only happens in the Viewer(s).
I’m afraid I don’t understand what you mean by: “If you select "Photos" from near the top of the Library tab of the Inspector, does it show you all of your Images?”. I am a newcomer to Aperture, so I don’t know what some of the buttons are for yet, but when I want to look at and adjust my pictures, I import them, as referenced images, then Aperture creates a folder/project in the Library. When I click on that Project (when it’s working properly), all the images appear in the Browser or the Viewers – without me needing to “select Photos from near the top of the Library tab of the Inspector”. I selected it and looked at all the items in the dropdown menu, but none of them seems to offer the option to ‘show all the images’. So I’m not sure how to answer your question except to say that – yes, I can see all the pictures in the Browser or the Viewers (when it’s working properly), but I don’t seem to need to use the Photos button to achieve this.
Did Aperture work before?
Yes it worked ok for a while, but I only purchased it on 24th May.
If I understand correctly, the difference between thumbnail and preview is that the thumbnail is what I see when the “Loading” wheel is turning, and the disappearance of this wheel after a few seconds means that I am now looking at the preview (also, the thumbnail cannot be adjusted).
So I think the problem occurs when the thumbnail has finished loading; the viewer going blank/grey might mean that it is not showing the preview.
But I have not changed the default Preview settings in Aperture Preferences.
My macbookpro details:
2.7 Ghz Intel Core i7
Memory: 8 Gb 1333 MHz DDR3
Hard Drive capacity 499.25 GB
Available 387.36 GB
I have noticed another problem: I cannot apply the same rating to multiple images: following the instructions, I select a group of contiguous (or non- contiguous) images, choose a selection eg “5stars” using the keyboard, but the stars only appear in the last selected image – even though all the images are still showing as selected.”
I hope this helps you to understand more.
Thank you for trying to help me.
Tony -
Disk Utility - Partition map needs repair because a data partition needs loader space.
I just finished setting up both my OSX and Windows installs from scratch after fitting an SSD, which in-turn was right before my logic board died and Apple replaced it, now it looks like I have some sort of hard drive issue brewing.
This was my plan for the SSD, and how it currently displays in Disk Utility although that wasn't the case earlier:
And in Terminal:
My intention was to have two boot partitions for each OS, 'Macintosh HD' and 'Win 7 Pro' and a third shared data partition 'Projects' on the SSD, which I made in Drive Genius after installing Boot Camp. I don't want Macintosh HD accessible from Windows because I'll be using Paragon HFS+ or MacDrive to give write access and don't want OSs stomping on other OSs turf, hence needing three partitions. Everything looked fine until I just checked Disk Management under windows and realised it couldn't see the Projects volume. Even though it's fine in OS X, it was just marked black/unallocated space.
So I booted back into OSX, all my files look fine so I ran Disk Utility and the Partition tab looked really odd - unfortunately I didn't get a screenshot. All volumes reported their size correctly but visually, Macintosh HD took up most of the drive. I could see 'Windows 7 Pro' under this, but the Partition Layout section had a scrollbar, which if I scrolled down showed 'Projects' squished into a tiny gap at the bottom. I ran a Verify, which reported no problems, and at some time since the Partition Layout has reverted to how it should look (as in the screenshot above), with 'Projects' book-ended by "Macintosh HD' and 'Windows 7 Pro'.
Now when I run a Verify on Macintosh HD or Projects volumes, it says there's no problem, but if I run one on the drive, I get this message:
Volume Macintosh HD on disk0s2 has 0 bytes of trailing loader space and it needs 134217728 bytes
Problems were found with the partition map which might prevent booting
Error: Partition map needs repair because a data partition needs loader space.
I've only managed to find one other mention of this error here, but the fix is not relevant to me because I don't have Sophos installed. I've tried Single User/Safe Mode but it just boots into normal mode, so I can't do a fsck -fy.
** /dev/rdisk0s2 (NO WRITE)
Can't open /dev/rdisk0s2: Permission denied
That value in bytes is exactly 128mb, so I suspect the problem lies with one of the invisible partitions that show up in iPartition and Disk Management under Windows, but not in Disk Utility. I have backups and I suspect the root of the problem is partitioning in iPartition after installing Boot Camp, but I've never had issues with this approach in the past so I'm wary of just giving up and reinstalling Windows again will be massive hassle because I no longer have a SuperDrive and last time it refused to install from USB.
Anyone have any idea what's going on? It seems like the sort of issue Disk Utility should just handle, at least in Recovery mode, but it's not playing ball. It also doesn't seem like a massive problem since my files all look fine and performance is OK, so I'm reluctant to do anything major.
I'll update with a shot of the drive in Disk Management from Windows in a few minutes, in case that sheds light on anything. Thanks!Similar issue here. I manually partitioned my hard disk for triple boot (using Gparted on Linux), then everything was just fine until I ran bootcamp, to do something as simple as create a boot USB.
I get the same error as a result and have to work my way into booting, by resorting first to a Linux live USB, then restarting from the live USB, to finally reach my rEFInd boot manager, or whichever boot manager should be initialized at startup.
I suppose that the cause in my case is that some operation "scratched" the protective MBR. See this:
http://www.mactech.com/articles/mactech/Vol.23/23.03/APMtoGPT/index.html
I am hoping to fix it using an external Yosemite installation media: see this guide -
http://www.macworld.com/article/2367748/how-to-make-a-bootable-os-x-10-10-yosemi te-install-drive.html
And as a last resort to reinstall.
I'll admit I am negatively surprised. I need this computer for professional reasons, and for the sake of "preserving the integrity of OSX", measures defined by Apple instead tend to make partitions far easier to damage. And this problem seems to affect a number of users.
As for what I have to go through to fix it: a 5GB download, during which I have to register my credit card to the Apple Store. "Pay first, get your free software next."
IF Disk Utility can fix it, from the external media, then fair enough. The hassle is unpleasant but it files as "a choice".
Otherwise you can file it safely under software design calamity. -
Time machine external hard drive requires repair every time I turned the computer off or after I ejected the external hard drive?
What kind of repair?
-
XSLT mapping requirement.. Only numbers need to be picked..!!
Hi ,
XSLT mapping requirement.
I will be getting the value as mix of numbers and alphabets like " 1343: -BIZ USA ".
I need to pick only number '1343' from the input field.
Is there any function in XSLT to pick only numbers and ignore alphabets?
Thanks
DeepthiHi There,
The below piece of code could cater your requirement, for flltering the non digit chars from your field,
<xsl:value-of select="translate(<your field name>, translate(<your field name>, '0123456789', ''), '')"/>
This would separate the non numeric chars from your field in mapping.
Let me know this works.
Regards,
Rajesh Kumar T -
Mapping requirement about grouping with restriction
Hi,experts:
There is a complex mapping requirement.
There are 2 document types(A and B) in the source records.
I need collect the amount with the document which is type A.
The source records are as follows:
Doc_No Doc_Type Doc_Itm_No Amount
0001 A 0010 3
0001 A 0020 4
0002 B 0010 5
0002 B 0020 6
0003 A 0010 11
0003 A 0020 22
The target records should be:
Doc_No Doc_Type Amount
0001 A 7
0003 A 33
The source and the target data type are the same as follows:
Documents 1...unbound
---Doc_No 1...1
---Doc_Type 1...1
---Doc_Itm_No 1...1
---Amount 1...1
Q1: How to create the target top node(Documents) with restriction(Doc_Type = 'A')?
Without the restriction,i can handle it well as follows:
removecontext(Doc_No)->sort->splitbyvalue(value changed)->collapsecontexts->Documents
Q2:How to collect the amount?
Regards
Minghi ming,
do this mapping
Q1: How to create the target top node(Documents) with restriction(Doc_Type = "A")?
Doc_type-->(if equals "A")>(remove context)-->(createif)----->Documents
q2. How to collect the amount?
Doc_type(Documents context) + Amount(Document's context)--->UDF1>(SplitByValue)->Doc_type
Doc_type(Documents context) + Amount(Document's context)--->UDF2>(SplitByValue)-->Amount
//****************************UDF1***********************//
public void get_batch_name(String[] Doc_type,String[] Amount,ResultList result,Container container){
//write your code here
Hashmap myHashmap=new Hashmap();
for(int i=0; Doc_type.length(), Amount.length())
if(myHashmap.get(Doc_type<i>==null))
{myHashmap.add(Doc_type<i>, Amount<i>);}
else
String amt= amt+myHashmap.get(Doc_type<i>);
myHashmap.put(Doc_type<i>,amt);
Set s=myHashmap.keySet();
Iterator i=s.iterator();
while(i.hasNext())
result.addValue(i.next());
//********************UDF2***************************//
public void get_batch_name(String[] Doc_type,String[] Amount,ResultList result,Container container){
//write your code here
Hashmap myHashmap=new Hashmap();
for(int i=0; Doc_type.length(), Amount.length())
if(myHashmap.get(Doc_type<i>==null))
{myHashmap.add(Doc_type<i>, Amount<i>);}
else
String amt= amt+myHashmap.get(Doc_type<i>);
myHashmap.put(Doc_type<i>,amt);
Arraylist s=myHashmap.values();
String array[]=s.toArray();
while(int i=0;i<array.length();i++)
result.addValue(array<i>);
Message was edited by: self
sudeep dhar -
Mapping requirment based on field value
Hi All,
I have a mapping requirement
where in the file i have a 2 AM records as shown
AM U 00000000000010000C
AM X 00000000000120000
Based on AM-03 field i..e,, AM-03 = 'C'
then to the target field i need to pass the value(00000000000120000) of next AM02 record.
so when ever AM03 filed is 'C' then i need to pass the value of next AM record.
can any body suggest me how i it can be acheived.
Thanks
Sai_SHAi am not sure whether i have understood ur req correctly or not..
but u can chk this UDF in ur mapping:
execution type: all values of a context
if(var1[0].equals("C"))
result.addValue(var2[1]);
filed3---removecontext
UDF----target
field2---removecontext -
Mapping Requirement for File to IDOC
Hi All,
I have a requirement related to Mapping and need your help on this. There is a financial posting Interface and the data is being fetched from database using strored procedure.
The source file is having structure like as shown below
<FIExport>
<resultset>
<row>
<headerid>12345</header id>
<field2>5</field2>
<field3>1</field3>
<field4>29</field4>
<field5>3</field5>
</row>
<row>
<headerid>12345</header id>
<field2>5</field2>
<field3>1</field3>
<field4>48</field4>
<field5>3</field5>
</row>
<row>
<headerid>12345</header id>
<field2>5</field2>
<field3>1</field3>
</field4>
<field5>3</field5>
</row>
<row>
<headerid>12346</header id>
<field2>5</field2>
<field3>1</field3>
<field4>2</field4>
<field5>3</field5>
</row>
<row>
<headerid>12347</header id>
<field2>5</field2>
<field3>1</field3>
<field4>2</field4>
<field5>3</field5>
</row>
</resultset>
</FIExport>
Condition:
For creating target structure follwoing conditions are required
1) IDOC at receiver side will be created as per unique header id therefore in the current source structure 3 Idocs will be created for 3 unique header id like 12345 , 12346 , 12347
2) Target EIFISEG which is line item will be created based on per row per unique header id under each IDOC and there has to be 2 SEGMENTS (2A & 2B ) per row based on the VAT amount presence and also two additional E1FISEG has to be created statically per idoc for BSCHL = 34
so for the above source structure the target should have number of EIFISEG as follows:
As there are 3 rows for header id 12345, therefore under IDOC1 the number of EIFISEG will be
since VAT Amount(field 4) is present therefore for 2rows of 12345 header id IDOC it will generate 2X2=4 , E1FISEG segments (each for 2A & 2B) and 1 E1FISEG for 3 row of header id IDOC 12345.
In addition to this 2 additional segment will be created for BSCHL=34( it's duplicate segment of E1FISEG, so no issues in this)
Total number of E1FISEG segments in IDOC for header id(12345) will be = 4 + 1 + 2 = 7 segments
Similarly for IDOC with header id (12346) the total number of EIFISEG will be = 2( 2A & 2B as vat amount (field 4) is present + 2(bschl =34) = 4 segments
Similarly for IDOC with header id(12347) the total number of E1FISEG will be = 2( 2A & 2B as vat amount (field 4) is present + 2(bschl =34) = 4 segments
So the target strcuture should look like:
Target Structure
IDOC1 for header id= 12345
E1FIKPF
field 1
E1FISEG1
field 2
E1FISEG2
field 2
E1FISEG3
field 2
E1FISEG4
field 2
E1FISEG5
field 2
E1FISEG6
field 2
E1FISEG7
field 2
IDOC1 for header id= 12346
E1FIKPF
field 1
E1FISEG1
field 2
E1FISEG2
field 2
E1FISEG3
field 2
E1FISEG4
field 2
IDOC1 for header id= 12347
E1FIKPF
field 1
E1FISEG1
field 2
E1FISEG2
field 2
E1FISEG3
field 2
E1FISEG4
field 2
Please help me to complete this mapping requirement as it seems to be complex.
Thanks & Regards
PrabhatHi,
There was one typo mistake, the TARGET structure will be
Target Structure
IDOC1 for header id= 12345
E1FIKPF
field 1
E1FISEG1
field 2
E1FISEG2
field 2
E1FISEG3
field 2
E1FISEG4
field 2
E1FISEG5
field 2
E1FISEG6
field 2
E1FISEG7
field 2
IDOC2 for header id= 12346
E1FIKPF
field 1
E1FISEG1
field 2
E1FISEG2
field 2
E1FISEG3
field 2
E1FISEG4
field 2
IDOC3 for header id= 12347
E1FIKPF
field 1
E1FISEG1
field 2
E1FISEG2
field 2
E1FISEG3
field 2
E1FISEG4
field 2
Thanks & Regards
Prabhat -
IS Mapping required in JDBC to PROXY asynchronous scenario?
Hi,
I am working on JDBC to PROXY asynchronous scenario. The scheduled stored procedure fetches the data from database tables and stores them in staging table in the same database. XI will fetch the records via JDBC adapter. Now these records are to be posted into SAP custom table via proxy without any transformation. Now is Message mapping and Interface mapping required in this case?Hi
I assume that your source and traget structure will be different as you are using JDBC.
SO you will need to create message mapping and operation mapping.
-Deepak. -
Dear all,
I have a mapping requirment based on IDOC Segment to SOAP.
My IDOC Structue is like this:
Source Target
segement1:
itemA
itemB
itemC ID
itemD
Segement2:
itemD
itemE Description
itemF Value
Based on ItemF ,if its value is 00 then get itemC from Segement1 and itemE from Segement2 and map to target as ID and Desciption .
Please provide me the graphical mapping design.
Regards
Vsantoshcan u provide me some more information like
if ItemF value is 00 then ur trying to get the data from the two fields from the source side ,
what do u want to do with those two values (means u want concatnate or what) and
if itemf value is not queals to 00 then what to do ....... -
Hi All,
I am having a mapping requirement. A comma separated string is coming in the source field and i have to split the value
and map the target fields.
For example:
Source:
<Row>123,BOFA,Success,True</Row>
Output
<Target>
<A>123</A>
<B>BOFA</B>
<C>Success</C>
<D>True</D>
</Target>
I am using UDF for the same but getting an exception.
Please help.
Thanks!!Hi,
Are there only one row or multiple rows in source XML? Then mapping the root is also necessary. Secondly if we look at this XML
<Target>
123 BOFA <C>Success</C>
<D>True</D>
</Target>
The value "123 BOFA" is expected to be within XML tag as shown below
<Target>
<A>123 BOFA</A>
<C>Success</C>
<D>True</D>
</Target>
Could you please kindly mention the version of PI you are working in.
Anyways you can use the following UDF to meet your requirements. For each field in target, u need separete UDF. The value of variable "i" is only to be altered for each target field.
public String UDF(String a,Container container)
String s[]=new String[3];
int i=0;
try
String tgt[]=a.split(",");
//first field value
s[0]=tgt[0]+" "+tgt[1];
//second field ("C") value
s[1]=tgt[2];
//third field ("D") value
s[2]=tgt[3];
catch(Exception e)
e.printStackTrace();
//value of i decides which field you want to populate for first field i=0 so on and so forth
i=0;
return s<i>;
Hope this solves your problem.
regards
Anupam -
Why do I have to put my debit card information when I sign in to download a free app from the App Store? This was not required before. It started happening like 2 weeks ago.
i had to format my laptop
You can reinstall Lion (Mac OS X) by pressing Command + R while booting your Mac. No need to re download Lion again.
Help here > OS X: About OS X Recovery -
Laptop requires a password to start T410
Morning to all,
few days ago, my laptop requires a password to start.
This started abruptly. I carried the laptop turned on to place it on a table and there it restarts by itself and displays a padlock requiring a password.
Please, can you tell me how to fix this.
Bests regardsDid you happen to run a BIOS update?
What if you try a blank password?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen -
Concurrent Manager requires physical hostname to start??
Hi,
We are planning to setup HP Service Guard Clustering for our Oracle R12.0.6 instance.
After going thourgh HP documentation(http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA1-2863ENW&cc=us&lc=en)
, i understood that Serviceguard uses virtual hostname concept for failover.
The HP document suggests to use PCP, which is a complex setup for us as per our existing envirtonment.
But Oracle says CM requires physical hostname to start.
CM will not failover with virtual hostname according to oracle.
Could anybody kindly explain why CM need physical hostname?
how can i use Note: 734506.1 - Virtual Hostnames For Concurrent Managers with the above HP document to setup a succesfull HA E-Business Suite R12.
Please suggest me for better.
Thanks.Hi user;
Please check
How To Configure Autoconfig For Hp Service Guard [ID 790123.1]
Implementing Virtual Host, Concurrent Managers and EM DBconsole on Oracle Applications R12 [ID 603883.1]
Also see:
http://oracleappstechnology.blogspot.com/2009/06/concurrent-managers-require-physical.html
Hope it helps
Regard
Helios -
I ahve a ipod touch of first generation model no.=MC540ll and i want to update my IOS of my ipod to 6.1.5 it requires 2 GB to start i want to know that after instillation the memory will be reduced or not?
A model MC540ll is a 4G iPod and can go to iOS 6.1.5.
Updating via wifi (settings>General>Software Update requires about 2.4 GB of storage available. After the update all but maybe 50 MB will be returned to for use. iOS 6 takes up only a little more that iOS 5 but the excess storage space is needed to perform the update.
If you update via iTunes yo do not need exces storage space
Maybe you are looking for
-
Help :add multiple rows from Resultset to ArrayList ?
My query returns one column and multiple rows. In Java code , I am trying to get this data in array or arraylist through ResultSet ex: item_num p001 p002 p003 when I print, it only gets the item in the first row. ArrayList myArrayList = new ArrayList
-
How do I make my AirPort Extreme a access point?
I just bought a Time Capsule and now I want to extend my range of my network. How do I make my AE an access point?
-
How To Transfer MP3 Music Files At A 96kb speed, From A CD To A Zen Mic
I have a couple of CDs with MP3 music files on them. One problem is that the music is recorded at various speeds from 28 to 320kbs. I know of to transfer the files over, but I can't seem to lower the speed down to 96kb. I want to know if it is possib
-
Problem printing PDF picture files imported from JPG using HP Colour InkJet cp1700 printer
When I print PDF picture files imported from JPG using an HP Colour InkJet cp1700 printer, the picture spills over. A wide range of other PDF files print OK. Have tried things such as configuring the printer to scale to letter size, etc,, but witho
-
Mac/FF 4. Title says it all: When I go to the Add-ons Manager in FF4, no add-ons are listed, but I'm using the browser and all of my add-ons are available everywhere they're supposed to be. I have 3.6.16 installed in another directory which uses the