LUW struck in BW but no entries in SM58

Hi All,
I am using the Master data source 0CUST_SALES_ATTR. I got the TRFC Struck in RSMO. SO i checked in SM58 of R/3 side and found there is no entry from SM58. But in BW Side, RSMO is showing in TRFC Struck. I dont where it Struck and how to find the TRFC struck. For this data source, i dont find any entry in SM58. Please suggest.
Thanks.

Hi,
Rather than checking at Source SM58, please check your ecc job log details. if we see any error message there, accordingly we can cross check. please share error message if you see there.
if its full load, then again you can trigger your info pack.
Thanks

Similar Messages

Duplicate entries in iTunes display, but both entries point to the same physical location.

I've seen lots of discussion about how to remove duplicate copies of the same song, but my issue is different.
iTunes has duplicate entries in its database, but if I do show in finder, then both entries point to the same physical location.
If I delete one entry, then the other entry becomes unusable.
Any idea how I could clean this up? Its annoying because if I select an album to play, then each song gets played twice.

@zoo_bink I too have exactly the same issue however it's not affecting all my files.
One solution, which I'm contemplating, is to backup the iTunes Media folder, delete files, uninstall/reinstall iTunes then re-import the files. The issue may have arisen during initial import. (I'm not sure at this stage if Apple allow iTunes to be uninstalled.)
iTunes music collection is showing 58.95GB versus 57.11GB in Finder so it's not a massive deal but annoying nonetheless as deleting entries isn't an option.
Any suggestions welcome.
MacBook Pro, OS X 10.9.1, iTunes 11.1.3 (8)

OIM 11gR2 : GTC working but no entry in USR

Hi,
I am running a GTC for recon with the ODS. I am getting no errors in the error log, the scheduler runs the GTC job absolutely fine but i am not getting the recon entry in the USR table. Kindly help.
Thanks,

Hi,
Are there any recon events created?
Regards,
Raghav.

SMTP Auth (Works but log entry worries me)

Hello,
So I'm seeing the following entries in the smtp / mail access log. All users can login fine and send / receive mail. I have ssl for imap required and smtp set to use (and not require). Clients are all 10.5.2 using apple mail and are configured to use ssl on port 993 with md-5 challenge response.
May 6 18:59:17 host imaps[3311]: starttls: TLSv1 with cipher AES128-SHA (128/128 bits new) *no authentication*
May 6 18:59:17 host imaps[3311]: login: [xxx.xxx.xxx.xx] user CRAM-MD5+TLS User logged in
Every user displays this activity, I'm worried about the "no authentication" line...
I read this as CRAM-MD5 and SSL working just fine but what's with the no authentication? Am i worrying over nothing?
Also, where could I find similar login reports for smtp? I can view smtp logs of course and I do but that isn't where the login attempts are so I'd like to see if I am receiving similar errors for smtp.
If i'm worrying over nothing and just reading this wrong then by all means let me know
my imapd.conf file for reference:
admins: cyrusimap,
configdirectory: /Volumes/xxxxx/Mail/Database
partition-default: /Volumes/xxxxx/Mail/Store
unixhierarchysep: yes
altnamespace: yes
servername: host.domain
sievedir: /usr/sieve
sendmail: /usr/sbin/sendmail
lmtpdowncasercpt: 1
unixgroupenable: 0
berkeleytxnsmax: 400
berkeleylocksmax: 20000
berkeley_cachesize: 8192
berkeleymax_logregion: 2048
berkeleymax_logfile: 10240
berkeleymax_logbuffer: 2048
tlskeyfile: /etc/certificates/host.domain.key
quotawarn_frequencydays: 1
tlscertfile: /etc/certificates/host.domain.crt
enablequotawarnings: yes
imapauth_crammd5: yes
enable_pop: no
logrolling_daysenabled: 0
logrollingdays: 1
tlscafile: /etc/certificates/host.domain.chcrt
tlsserveroptions: require
popauthclear: no
imapauthclear: no
imapauthgssapi: yes
lmtpluserrelay: undeliverable

Nothing to worry about.

Multiple google calendars synced to my ipad with exchange but the entries don't appear

I've done this many times before with various iphones, but my new ipad2 vexes me. I want all my google calendars to appear in the calendar app on my ipad. I've:
set up the google account as an exchange account
signed in to m/google.com/sync
selected the correct device
enabled the calendars
you can see the complete list of calendars in the the cal app, but the actual events don't appear.
if i create a new event on one of these invisable calendars, it appears.
thoughts?

Can you attach a screenshot?
* http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
There are other things that need your attention.
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Next Generation Java Plug-in 1.6.0_14 for Mozilla browsers
Update the [[Using the Java plugin with Firefox|Java]] plugin to the latest version.
*http://kb.mozillazine.org/Java
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

GL Account Blocked but no entries in SM12

Hi
I'm using F-04 transaction in my program for Electronic Bank Reconciliaton. I pass the data to the program through a flat file.
For some records im geting the error "Account 7010010002 UIIC is currently blocked by user xxxxxx".
When i debugged it, the std FM "ENQUEUE_EFSKB1A" is throwing an exception "Foreign_lock". It is happening only for few records.I checked the tcode SM12 there are no locked entries for the user. Even the checkboxes in FS00 are unchecked for blocking.
This error occurs in the prgram SAPMF05B (INCLUDE MF05BFA0). How can I get rid of this error.
Thanx
Mamtha

Hi Ravi,
Since you would have created a Return PO, now you need to carry out Goods Receipt by using Mov Type 101 only. After posting system converts this movement type to 161.
You don't need to select Mov Type 161.
Regards,
Sanjay

In working with my calendar, i don't know what i might have done, but all entries on Fridays, starting from Friday, March 14, simply disappeared. my time machine was not functioning and am wondering if this info is hiding somewhere in the cloud?

In working with icalendar, i inadvertantly lost all Friday entries after March 14th. My time machine was not hooked up. Hoped that the cloud might have this information.

You can check to see if they are still in iCloud by looking at your calendar on icloud.com. If they are, go to System Preferences>iCloud on your Mac, uncheck Calendars, choose Delete from Mac (they will still be in iCloud), restart your Mac, then go back and sign back in. If they aren't on icloud.com you might just give it some time to see if they reappear due to a server glitch.

BAPI_MATERIAL_MAINTAINDATA_RT gives error KM701, but manual entry succeeds

I have written a program which creates a new material using function module BAPI_MATERIAL_MAINTAINDATA_RT. I get the following error:
KM701 Profit center K100/12345 does not exist
However, I can add the same profit center (12345) to the article in transaction MM42 without problems.
I'm using the same user ID for the BAPI call (via RFC) and manual entry via MM42.

you probably forgot the leading zeros for the profit center.

Index tab appearing, but no entries are in it.

Hello,
I am using the RoboHelp 6 trial version. I created an index,
and it appears when I generate the WebHelp and view it locally
within RoboHelp. however, I published it to the web, and the index
tab is there, but has nothing in it. What can I do to fix this?
Thanks!
Jennifer Bennett

Has everything in the local output been published? How did
you publish to the server?
Also how many topics in this project?

No Entry in SOST Queue, but NAST entry exists

Hi ,
I have a peculiar problem. I have created sales order and could see output issued in sales order in green status.
Also the entry is present in NAST table. However i do not see any entry in queue in SOST.
I chcked with Basis guys and confirmed SMTP node is ON.
Is there any disconnect between NAST table and SOST queue?
Do i need anything additional to look after?
Regards,
Sarang

Hi,
Add the below line along with the Call function :
DESTINATION 'NONE'
the FM call should look like.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
       DESTINATION 'NONE'
       EXPORTING
         document_data              = l_wa_doc_data
         commit_work                = 'X'
       IMPORTING
         sent_to_all                = l_var_sent
       TABLES
         object_content             = l_tab_objcont
         receivers                  = l_tab_receiver
       EXCEPTIONS
         too_many_receivers         = 1
         document_not_sent          = 2
         document_type_not_exist    = 3
         operation_no_authorization = 4
         parameter_error            = 5
         x_error                    = 6
         enqueue_error              = 7
         OTHERS                     = 8.
this should solve your issue

EM shows alert "User SYS logged on from node but no entry in SYS.AUD$

Hello,
When i look on the alert page of my databases i see sometimes the following message "User SYS logged on from <node>.
I have setup several audit actions, like "create session" to track sessions.
But in table SYS.AUD$ i see many records, but not the one of user SYS.
Why? Anyone an idea?
Best regards,
hvdtol

i understand it is comming from metrics, but i don't understand why i can see it in the sys.aud$ table.
hvdtol

200 iPhone 4 contacts, but 200 entries called mobile too

Howdy!
I picked up my iPhone 4 last week, synced it with my MB, didn't really pay much attention to what it was syncing. Now I've noticed though that it has synced my mac's address book, and for every contact I've got another contact called 'mobile' with their mobile number in there.
If possible, I'd prefer to just delete the entire contacts list, and import from my gmail account, but again, I don't know if this can be done!
Thank you in advance lovely Apple peoples! :o)

You can export all your Google Contacts as a vCard file and then import them into your empty Mac Address Book.
In Google, select all, export, vCard, export, save
Empty your Address Book, then sync.
Then import your vCard file, then sync again

Stolen iPad was wiped and erased/synched my exchange calendar. I have recovered some of the calendar entries through the outlook web app, but only entries made in the last 15 or so days. Any ideas on how to recover the rest?

My ipad was stolen over the weekend and i immediately contacted apple to do a data-wipe.
On wednesday, the ipad was apparently wiped and then decided to sync with all of my other systems. It's been two days and I just figured out how to access and recover deleted items from the Outlook Web App from my exchange host.
They were scattered throughout and sorted by the date they were added to the calendar so some things are still missing. Anyone know how to restore what i'm still missing?

My ipad was stolen over the weekend and i immediately contacted apple to do a data-wipe.
On wednesday, the ipad was apparently wiped and then decided to sync with all of my other systems. It's been two days and I just figured out how to access and recover deleted items from the Outlook Web App from my exchange host.
They were scattered throughout and sorted by the date they were added to the calendar so some things are still missing. Anyone know how to restore what i'm still missing?

HT2292 Can Access downloaded songs but signing in to iTunes Store makes loading bar scroll but no entry and times out after awhile :)

P.C. can't Access itunes store when logging in. Yet can open up and play dowloaded songs and previous converted C.D.s. Running Windows 7 home O.S.Also iPhone 4 is not recognised when connected to iTunes. Have Unistalled and Reinstalled iTunes a number of times and does not resolve the issues.uninstalled USB drivers and reinstalled still does not work

I am running iTunes on Windows Vista. Can access Store, cannot buy. Same connection timed out error. Tried everything Apple suggested including router reset, router bypass, firewall exception, dns flush, what have you...doesnt work. Guess going to try early in the AM...IDEAS?????

One Entry to Non-Trade Receivable, but many entries to FB75

Dear Gurus,
Many times we get a listing from A major Supplier, we call it Principal to pay various customers loyalty awards every month. We normally credit each customer and each debit goes to the Principal account before making payment thru F-53.
I would like to debit the Principal account with one composite amount, and same time credit individual Receivable accounts thru one process to keep arithmetic control and faster process.
How can it be done.

Hi,
You can use transaction F-30 to transfe and clear the receivables. To group the customer items and clear them you can use FBE1 transaction to create payment advice which can be called at the time of clearing.
Please refer to the linke below for steps to create a payment advice.
http://www.helpinfo.com/index.jsp?k2dockey=1021023549898505307&formwassubmitted=true
Regards
K.R

LUW struck in BW but no entries in SM58

Similar Messages

Maybe you are looking for