LV 5.0 and Set Operations

Hello all,
I am a student at the University of Texas @ Austin and I have been
looking through the LV 5.0 documentation for any documentation about
Sets and/or Operations on Sets but cannot find anything usefull. Does
anyone know if LV supports Sets and operations on Sets, for example,
Union, Intersection, or just a way to specify the elements of a Set? I
have an assignment to create a Non-Deterministic Finite State Machine
Simulator and would like to implement it using LV? I have some ideas on
how to Fake the set operations but it would be much easier to not have
to re-invent the wheel. I will check the newsgroup, but please also
respond to [email protected]
Thanx in advance Jeffo ....

Tom Impelluso wrote:
>
> Hello
>
> Due to interncine battles between various system admin. people,
> I have a problem.
>
> I have written a vi in lv 5.01, but must run it on a PC running
> lv 5.0
>
> It uses facilities common to both so it should open on the PC with
> 5.0, yet there is an error message
> when I pull up the 5.01 vi with 5.0
>
> Is there a way I can go back to the 5.01 and save it as a version
> 5.0 file?
>
> (yes, much easier to: load 5.01 on the PC, but that would involve,
> warlocks, spells, and the power of conflicting system admin. people;
> short of a kludge, I may have to re-write teh VI)
>
> Tom
Nevermind!
Figured it out.
Sorry to post pre-maturely
Tom

Similar Messages

LabVIEW and Set Operations

Hello all,
I am a student at the University of Texas @ Austin and I have been
looking through the LV 5.0 documentation for any documentation about
Sets and/or Operations on Sets but cannot find anything usefull. Does
anyone know if LV supports Sets and operations on Sets, for example,
Union, Intersection, or just a way to specify the elements of a Set? I
have an assignment to create a Non-Deterministic Finite State Machine
Simulator and would like to implement it using LV? I have some ideas on
how to Fake the set operations but it would be much easier to not have
to re-invent the wheel. I will check the newsgroup, but please also
respond to [email protected]
Thanx in advance Jeffo ....

"Jeffrey R. Orbach" wrote:
> Does anyone know if LV supports Sets and operations on Sets, for example,
>
> Union, Intersection, or just a way to specify the elements of a Set?
There are probably a number of ways to implement this in LabVIEW, depending
upon what kind of data you want in your sets, what kind of operations you
want to perform on them, etc. It's a pretty open-ended question without
more detailed knowledge of what you're after.
From my point of view, the LabVIEW array structure and its operators are a
construct that provides some set-like functionality right away:
specify set elements => array control on panel
check for membership => Search 1D Array
set union => Build Array (followed by Sort 1D Array if you want to keep the
set sorted)
set intersection
=> loop through one array using Search 1D Array on the
other to generate output set
This is one simple approach that shouldn't require a whole lot of coding or
wheel reinvention...
Regards,
John Lum
National Instruments

Joiner and Set Operations

I have a situation where source table A contains 3 code columns. The descriptions for the codes are contained in 3 different reference (lookup) tables. I want to denormalize target table B to include the descriptions for the 3 codes (as well as all columns from source table A).
How do I design the mapping to include reference (lookup) tables code descriptions?

You can use the key lookup mapping operator to get the values from the lookup tables on the fly. I.e. draw a connection from the source 'code' column to the key lookup operator, configure the key lookup operator to point to the appropriate lookup table with the correct lookup condition and connect the output of the key lookup to the name/description target column. The same 'code' column that you connected to the key lookup, you can now also directly connect to the code column in the target table.
Regards:
Igor

Out of scope error while attaching the attribute set and the operating unit

Hi,
Am getting the out of scope error when am trying to attach the attribute set "/oracle/apps/fnd/attributesets/HrOperatingUnits/OperatingUnitName_Transient"
and the operating unit lov "/oracle/apps/fnd/multiorg/lov/webui/OperatingUnitsLovRN" from my page in JDeveloper.
Can anyone help?
Thanks

Mostly
It would just be a warning message you can proceed with it there are no issues.But if its an error please do as mentioned by Reetesh.
Thanks
AJ

Problem in Adhoc Query's set operation functionality.

Hi Experts,
I am facing problem executing Adhoc Query's set operation functionality.
In Selection Tab, following operations are performed :-
Execute a query and mark it as 'Set A'.(Say Hit list = X)
Execute another query and mark it as 'Set B'.(Say Hit list = Y)
In Set operation Tab, following operations are performed :-:-
Carry out an Operations 'Set A minus Set B'.
which results in Resulting Set = Z.
Transfer the resulting set 'in hit list' and press the copy resulting set button.
In Selection Tab, Hit list is populated with Z.
And when output button is pressed, I get to see 'Y' list and not 'Z' list.
Kindly help.
Thanks.
Yogesh

Hi Experts,
I am facing problem executing Adhoc Query's set operation functionality.
In Selection Tab, following operations are performed :-
Execute a query and mark it as 'Set A'.(Say Hit list = X)
Execute another query and mark it as 'Set B'.(Say Hit list = Y)
In Set operation Tab, following operations are performed :-:-
Carry out an Operations 'Set A minus Set B'.
which results in Resulting Set = Z.
Transfer the resulting set 'in hit list' and press the copy resulting set button.
In Selection Tab, Hit list is populated with Z.
And when output button is pressed, I get to see 'Y' list and not 'Z' list.
Kindly help.
Thanks.
Yogesh

Set operations in AdHoc Query - user settings

Hi
I am checking out the Set operations in AdHoc Query. The documentation says you should save the setting "Set operations shown" as a user setting. Could anyone advise me where this is set? I can't find a parameter for it, and can't find it in the regular settings.
Any help appreciated.
Kirsten

The save is automatic upon exiting Ad Hoc query. Once you do "Show Set Operations", work on a query, save and exit, the next time you open Ad Hoc query, Set Operations tab is displayed by default.
Regards,
RN.

Find text from a file and set it as a variable in applescript?

I am trying to build a script that sends me updates and notifications from cex.io. Please keep on reading below, so I may guide you until the point I have trouble with.
The first simple script in this operation goes to cex.io's trading page for BTC/GHS. It records ands saves the text to a file every 4 seconds. It works great. It doesn't need to have safari refresh because the site pushes info to the browser live.
repeat
          set the webpage_content to ""
          tell application "Safari" to set the webpage_content to the text of document 1
          set theText to webpage_content
          set a to "Macintosh HD:Users:PRIVATE:Desktop:CEX:"
          set theFile to (open for access file ((a) & "CEXRaw") with write permission)
          write theText to theFile
          close access theFile
          delay 4
end repeat
And it returns this from the site to this main file every 4 seconds: (note I cut off a chunk from the bottom and the top of the file, because they are unimportant)
    GHS:
    0.05233439
    BTC:
    0.00000223
    NMC:
    0.00002939
    LTC:
    0.00000000
    GHS/BTC
    0.02362958 LTC/BTC
    0.02438131 NMC/BTC
    0.00597565 GHS/NMC
    3.96951800 BF1/BTC
    1.67000000 Fund Account
    GHS/BTC
    Last price:
    0.02362958
    Daily change:
    -0.00018042
    Today's open:
    0.02381000
    24h volume:
    73812.35539255
I now need an applescript to read that file, and return wanted values. But I'm lost on how to write it.
It needs to find the number under BTC, and set it as a variable.
It needs to find the number under GHS, and set it as a variable.
It needs to find the number under Last Price, and set it as a variable.
If anyone could script that really quick for me, or tell me how to do it, that would be amazing. Thank you so much!

Couldn't tell if you had any whitespace in the lines (i.e. is there a space before or after GHS:), so I used contains, not is. Also, if you have a line such as GHS/BTC with a colon GHS/BTC: then it will also fail (as contains "BTC:" would be true for BTC: and GHS/BTC:)
However, this will give you some guidance:
set a to "Macintosh HD:Users:PRIVATE:Desktop:CEX:CEXRaw"
set x to 0
set Names to paragraphs of (read file a)
repeat with nextLine in Names
          set x to x + 1
          if nextLine contains "BTC:" then
                    set BTC to item (x + 1) of Names
          else if nextLine contains "GHS:" then
                    set GHS to item (x + 1) of Names
          else if nextLine contains "Last Price:" then
                    set lastPrice to item (x + 1) of Names
          end if
end repeat

Set operations & tables with different columns

I have a problem. I have 3 tables - Countries, Locations & Departments. I want to output the country_id and country_name from the countries tables for countries that have no departments. Locations has country_id and location_id columns and departments has location_id and department_id columns. All is in Database 11g. I can produce a table which gives me the locations with departments or without departments as follows:
select location_id from locations intersect select location_id from departments;
This gives me a list of locations with departments. Conversely I can get a list of locations without departments as follows:
select location_id from locations minus select location_id from departments;
However, to combine this output with the countries table I need to produce country_id in the output. However, when I try to add country_id to my code from above as follows:
select country_id, location_id from locations intersect select to_char(null), location_id from departments;
I get no rows found. I understand why. There is no intersection between country_id in locations and the null output from departments (where there is no country_id column). Alternatively, if I try as follow:
select country_id, location_id from locations minus select to_char(null), location_id from departments;
I get rows with every country_id whether they have departments or not. Again, I understand why. I am essentially subtracting nothing (the to_char(null) from departments) from the country_id column in locations and getting the entire country_id column as output.
How can I use set operations to produce the country_id column? I also do not want to show the location_id problem.
This problem is repeated when I try for the final country_id, country_name final output. The countries table has these columns. However, the locations table does not have the country_name column. It only has the country_id column. So a query such as this one:
select country_id, country_name from countries intersect country_id, to_char(null) from locations;
presents me with the same problem as above. The country_id column intersects nicely, but the country_name file does not intersect as it does not exist in the locations table. Again, how can I use set operations to produce the country_id and country_name columns.

Hi,
the method I outlined for you above should be fine. It doesn't matter that there are one-to-many relationships which may cause repeated output rows; set operations (except for UNION ALL ) always return distinct rows.
Can you do a query on the countries table, that shows all countries?
Can you do a query involving all 3 tables inner-joined, that shows the countries that are related to locations and departments? (Repeated rows are okay.)
Then you can do a MINUS, to get only the countries that are not related to departments.
If you get stuck, post a little sample data (CREATE TABLE and INSERT statements), the results you want from tha data, your best attemptat a query, and a description of the problem (including the full error message, if any).

AdHoc Set Query - set operations - practical use

Hi
I am writing a user manual about AdHoc Query - including Set operations. I am looking for good examples when to use the different operations. A-B is easy. Example - 'give me all employees that are not on maternity leave'. But I am struggling with good practical examples on when to use Union and Intersection. It needs to be examples that cannot be covered by selection criteria in one single query.
Does anyone have any good practical examples? Any help appreciated.
Kirsten

Hi Kirsten,
I use Set Operations many times to find individuals who do not have a certain infotype or plan. Example: Find all retirees who are not enrolled in a medical plan. Group A = All retirees;
Group B = All retirees in a medical plan. A - B = Retirees with no medical plan coverage.
Ad Hoc Query does not allow you to use "Or" logic in selection with different criteria. A Union could be used for this. An example would be employees who are in pay Grade 1 - 5 (Group A) or earn less than $50,000 per year (Group B). Intersection would be those in Grades 1 - 5 and earn less than $50,000 per year.
Paul

How to activate Show Set Operations in Ad Hoc query

When I go into ad hoc query using an infoset I created the Extras > Show Set Operations and Switch off object selection functions are greyed out and I cannot select them. On another infoset these functions are available for selection.
Is there some setting in the info set creation that allows these function to be available for selection?

closing question

Photoshop cs6 running extremely slow on opening a file. have reset prefs and set type to none.

Photoshop cs6 running extremely slow on opening a file. have reset prefs and set type to none. have to force quit most of the time.

I'm experiencing the same trouble. Photoshop takes 5 minutes to open then runs fine.
I recently bought a new iMac AND updated to Adobe Master Collection CS6. My concern is that PhotoShop now takes 5 minutes to open. The Photoshop desktop pops up immediately, but the moment you click on a tool or try to open a file (no matter the size) results in the spinning wheel for five minutes before you can do anything. After that, Photoshop appears to work fine.
What I’ve done:
Ran Adobe updater
Reset Photoshop Preferences
Validated all fonts and removed any trouble fonts
Ran the font test
Set font preview size to none
Cleared the Photoshop type cache and system cache
Disabled Symantec Endpoint
Tried running with the GPU processor on/off and in basic
Tried opening Photoshop with optional third party plug-ins turned off (still took five minutes but this time I didn’t even get the Photoshop desktop view until AFTER the five minutes)
I’m wondering since I migrated the files form my old computer (and older versions of Master Collection) did something get corrupted.
System Info
Adobe Photoshop Version: 13.0.6 (13.0.6 20131025.r.54 2013/10/25:21:00:00) x64
Operating System: Mac OS 10.9.4
System architecture: Intel CPU Family:6, Model:60, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3500 MHz
Built-in memory: 32768 MB
Free memory: 21330 MB
Memory available to Photoshop: 30850 MB
Memory used by Photoshop: 70 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.2 (Apr 25 2014 22:04:25)
OpenGL Version: 2.1
Video Rect Texture Size: 16384
OpenGL Memory: 2047 MB
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: NVIDIA GeForce GTX 780M OpenGL Engine
Display: 1
Main Display
Display Depth: 32
Display Bounds: top=0, left=0, bottom=1440, right=2560
Video Renderer ID: 16918308
Video Card Memory: 2048 MB
Application folder: /Applications/Adobe Photoshop CS6/
Photoshop scratch has async I/O enabled
Scratch volume(s):
Macintosh HD, 931.0G, 713.2G free
Required Plug-ins folder: /Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/Required/
Primary Plug-ins folder: /Applications/Adobe Photoshop CS6/Plug-ins/
Additional Plug-ins folder: not set
Installed components:
adbeape.framework adbeape 3.3.8.19346   66.1025012
AdbeScriptUIFlex.framework AdbeScriptUIFlex 6.2.29.18602 66.490082
adobe_caps.framework adobe_caps 6.0.29.0   1.276181
AdobeACE.framework AdobeACE 2.19.18.20743   66.507768
AdobeAGM.framework AdobeAGM 4.26.20.20743   66.507768
AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
AdobeAXEDOMCore.framework AdobeAXEDOMCore 3.7.101.18636 66.26830
AdobeBIB.framework AdobeBIB 1.2.02.20743   66.507768
AdobeBIBUtils.framework AdobeBIBUtils 1.1.01   66.507768
AdobeCoolType.framework AdobeCoolType 5.10.33.20743 66.507768
AdobeCrashReporter.framework AdobeCrashReporter 6.0.20120720
AdobeExtendScript.framework AdobeExtendScript 4.2.12.18602 66.490082
   AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
AdobeLinguistic.framework      17206
AdobeMPS.framework AdobeMPS 5.8.0.19463   66.495174
AdobeOwl.framework AdobeOwl   5.0.4   79.517869
AdobePDFL.framework AdobePDFL   10.0.1.18562   66.419471
AdobePDFSettings.framework AdobePDFSettings 1.4
AdobePIP.framework AdobePIP 7.0.0.1686
AdobeScCore.framework AdobeScCore 4.2.12.18602   66.490082
AdobeUpdater.framework AdobeUpdater 6.0.0.1452   "52.338651"
AdobeXMP.framework AdobeXMPCore 66.145661   66.145661
AdobeXMPFiles.framework AdobeXMPFiles 66.145661   66.145661
AdobeXMPScript.framework AdobeXMPScript 66.145661   66.145661
ahclient.framework ahclient 1.7.0.56
   aif_core.framework   AdobeAIF   3.0.00   62.490293
aif_ocl.framework AdobeAIF   3.0.00   62.490293
aif_ogl.framework AdobeAIF   3.0.00   62.490293
AlignmentLib.framework xcode   1.0.0.1
amtlib.framework amtlib   6.0.0.75
boost_date_time.framework boost_date_time 6.0.0.0
boost_signals.framework boost_signals 6.0.0.0
boost_system.framework boost_system 6.0.0.0
boost_threads.framework boost_threads 6.0.0.0
Cg.framework   NVIDIA Cg
CIT.framework CIT   2.1.0.20577   146758
data_flow.framework AdobeAIF   3.0.00   62.490293
dvaaudiodevice.framework dvaaudiodevice 6.0.0.0
dvacore.framework dvacore   6.0.0.0
dvamarshal.framework dvamarshal 6.0.0.0
dvamediatypes.framework dvamediatypes 6.0.0.0
dvaplayer.framework dvaplayer 6.0.0.0
dvatransport.framework dvatransport 6.0.0.0
dvaunittesting.framework dvaunittesting 6.0.0.0
dynamiclink.framework dynamiclink 6.0.0.0
   FileInfo.framework   FileInfo   66.145433   66.145433
filter_graph.framework AdobeAIF   3.0.00   62.490293
hydra_filters.framework AdobeAIF   3.0.00   62.490293
ICUConverter.framework ICUConverter 3.61   "gtlib_3.0" "." "16615"
   ICUData.framework   ICUData   3.61 "gtlib_3.0" "." "16615"
image_compiler.framework AdobeAIF   3.0.00   62.490293
image_flow.framework AdobeAIF   3.0.00   62.490293
image_runtime.framework AdobeAIF   3.0.00   62.490293
LogSession.framework LogSession 2.1.2.1681
mediacoreif.framework mediacoreif 6.0.0.0
PlugPlug.framework PlugPlug 3.0.0.383
UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24 "6.0.0.24"
wrservices.framework
Required plug-ins:
   3D Studio 13.0.6 x001 ©2006-2013 Adobe Systems Incorporated - from the file “U3D.plugin”
   Accented Edges 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Adaptive Wide Angle 13.0, Copyright © 2012 Adobe Systems Incorporated - from the file “Adaptive Wide Angle.plugin”
   Angled Strokes 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Average 13.0.6 x001 ©1993-2013 Adobe Systems Incorporated - from the file “Average.plugin”
   Bas Relief 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   BMP 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Camera Raw 8.4 (199), Copyright © 2014 Adobe Systems Incorporated - from the file “Camera Raw.plugin”
   Camera Raw Filter 8.4 (199), Copyright © 2014 Adobe Systems Incorporated - from the file “Camera Raw.plugin”
   Chalk & Charcoal 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Charcoal 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Chrome 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Cineon 13.0.6 x001 ©2002-2013 Adobe Systems Incorporated - from the file “Cineon.plugin”
   Clouds 13.0.6 x001 ©1993-2013 Adobe Systems Incorporated - from the file “Clouds.plugin”
   Collada DAE 13.0.6 x001 ©2006-2013 Adobe Systems Incorporated - from the file “U3D.plugin”
   Color Halftone 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Colored Pencil 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
CompuServe GIF 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Conté Crayon 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Craquelure 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Crop and Straighten Photos 13.0.6 x001 ©2003-2013 Adobe Systems Incorporated - from the file “CropPhotosAuto.plugin”
   Crop and Straighten Photos Filter 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Crosshatch 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Crystallize 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Cutout 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Dark Strokes 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
De-Interlace 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Dicom 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “dicom.plugin”
   Difference Clouds 13.0.6 x001 ©1993-2013 Adobe Systems Incorporated - from the file “Clouds.plugin”
   Diffuse Glow 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Displace 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Dry Brush 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Eazel Acquire 13.0.6 x001 ©1997-2013 Adobe Systems Incorporated - from the file “EazelAcquire.plugin”
   Embed Watermark NO VERSION - from the file “DigiSign.plugin”
   Entropy 13.0.6 x001 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
   Extrude 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   FastCore Routines 13.0.6 x001 ©1990-2013 Adobe Systems Incorporated - from the file “FastCore.plugin”
   Fibers 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Film Grain 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Filter Gallery 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Flash 3D 13.0.6 x001 ©2006-2013 Adobe Systems Incorporated - from the file “U3D.plugin”
   Fresco 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Glass 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Glowing Edges 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Google Earth 4 KMZ 13.0.6 x001 ©2006-2013 Adobe Systems Incorporated - from the file “U3D.plugin”
   Grain 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Graphic Pen 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Halftone Pattern 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
HDRMergeUI 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “HDRMergeUI.plugin”
   IFF Format 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Ink Outlines 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   JPEG 2000 13.0.6 x001 Â©2001-2013 Adobe Systems Incorporated - from the file “JPEG2000.plugin”
   Kurtosis 13.0.6 x001 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
   Lens Blur 13.0, Copyright © 2002-2012 Adobe Systems Incorporated - from the file “Lens Blur.plugin”
   Lens Correction 13.0, Copyright © 2002-2012 Adobe Systems Incorporated - from the file “Lens Correct.plugin”
   Lens Flare 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Liquify 13.0, Copyright © 2001-2012 Adobe Systems Incorporated - from the file “Liquify.plugin”
   Matlab Operation 13.0.6 x001 ©1993-2013 Adobe Systems Incorporated - from the file “ChannelPort.plugin”
   Maximum 13.0.6 x001 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
   Mean 13.0.6 x001 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
Measurement Core 13.0.6 x001 ©1993-2013 Adobe Systems Incorporated - from the file “MeasurementCore.plugin”
   Median 13.0.6 x001 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
Mezzotint 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Minimum 13.0.6 x001 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
   MMXCore Routines 13.0.6 x001 ©1990-2013 Adobe Systems Incorporated - from the file “MMXCore.plugin”
   Mosaic Tiles 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Multiprocessor Support 13.0.6 x001 ©1990-2013 Adobe Systems Incorporated - from the file “MultiProcessor Support.plugin”
   Neon Glow 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Note Paper 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   NTSC Colors 13.0.6 x001 ©1993-2013 Adobe Systems Incorporated - from the file “NTSC Colors.plugin”
   Ocean Ripple 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Oil Paint 13.0, Copyright © 2011 Adobe Systems Incorporated - from the file “Oil Paint.plugin”
   OpenEXR 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Paint Daubs 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Palette Knife 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Patchwork 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Paths to Illustrator 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   PCX 13.0.6 x001 ©1989-2013 Adobe Systems Incorporated - from the file “PCX.plugin”
Photocopy 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Photoshop 3D Engine 13.0.6 x001 ©2006-2013 Adobe Systems Incorporated - from the file “Photoshop3DEngine.plugin”
   Picture Package Filter 13.0.6 x001 ©1993-2013 Adobe Systems Incorporated - from the file “ChannelPort.plugin”
   Pinch 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Pixar 13.0.6 x001 ©1989-2013 Adobe Systems Incorporated - from the file “Pixar.plugin”
   Plaster 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Plastic Wrap 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   PNG 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Pointillize 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Polar Coordinates 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Portable Bit Map 13.0.6 x001 ©1989-2013 Adobe Systems Incorporated - from the file “PBM.plugin”
   Poster Edges 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Radial Blur 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Radiance 13.0.6 x001 ©2003-2013 Adobe Systems Incorporated - from the file “Radiance.plugin”
   Range 13.0.6 x001 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
   Read Watermark NO VERSION - from the file “DigiRead.plugin”
Reticulation 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Ripple 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Rough Pastels 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Save for Web 13.0, Copyright © 1999-2012 Adobe Systems Incorporated - from the file “Save for Web.plugin”
   ScriptingSupport 13.0, Copyright © 2013 Adobe Systems Incorporated - from the file “ScriptingSupport.plugin”
   Shear 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Skewness 13.0.6 x001 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
   Smart Blur 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Smudge Stick 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Solarize 13.0.6 x001 ©1993-2013 Adobe Systems Incorporated - from the file “Solarize.plugin”
   Spatter 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Spherize 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Sponge 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Sprayed Strokes 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Stained Glass 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Stamp 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Standard Deviation 13.0.6 x001 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
   STL 13.0.6 x001 ©2006-2013 Adobe Systems Incorporated - from the file “U3D.plugin”
   Sumi-e 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Summation 13.0.6 x001 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
   Targa 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Texturizer 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Tiles 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Torn Edges 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Twirl 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Underpainting 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Vanishing Point 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “VanishingPoint.plugin”
   Variance 13.0.6 x001 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
   Water Paper 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Watercolor 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Wave 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Wavefront|OBJ 13.0.6 x001 ©2006-2013 Adobe Systems Incorporated - from the file “U3D.plugin”
   Wind 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Wireless Bitmap 13.0.6 x001 ©1989-2013 Adobe Systems Incorporated - from the file “WBMP.plugin”
   ZigZag 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Optional and third party plug-ins:
   Alien Skin Blow Up 3 Blow Up 3 3.0.0.672 20633 Copyright © 2011 Alien Skin Software, LLC - from the file “Alien Skin Blow Up 3 Automation.8li.plugin”
   Analog Efex Pro 1.0.11.180, Copyright ©2000-2014, Google - from the file “Analog Efex Pro.plugin”
   Analog Efex Pro 2 2.0.4.288, Copyright ©2000-2014, Google - from the file “Analog Efex Pro 2.plugin”
BackgroundFilter 2.2.16.288, Copyright ©2000-2014, Google - from the file “BackgroundFilter.plugin”
   Blow Up Blow Up 3 3.0.0.672 20633 Copyright © 2011 Alien Skin Software, LLC - from the file “Alien Skin Blow Up 3 Photoshop.8bf.plugin”
   Color Efex Pro 4 4.3.16.288, Copyright ©2000-2014, Google - from the file “Color Efex Pro 4.plugin”
   Dfine 2 2.2.16.288, Copyright ©2000-2014, Google - from the file “Dfine2.plugin”
FineStructuresFilter 2.2.16.288, Copyright ©2000-2014, Google - from the file “FineStructuresFilter.plugin”
   HDR Efex Pro 2 2.2.16.288, Copyright ©2000-2014, Google - from the file “HDR Efex Pro 2.plugin”
   Hidden Topaz Labs Denoise - from the file “TopazRemaskAutomate.plugin”
HotPixelsFilter 2.2.16.288, Copyright ©2000-2014, Google - from the file “HotPixelsFilter.plugin”
   Merge to HDR Efex Pro 2 2.2.16.288, Copyright ©2000-2014, Google - from the file “HDR Efex Pro 2 Automation.plugin”
   Nik Collection Selective Tool 2.1.21.288, Copyright ©2000-2014, Google - from the file “SelectivePalette.plugin”
ShadowsFilter 2.2.16.288, Copyright ©2000-2014, Google - from the file “ShadowsFilter.plugin”
   Sharpener Pro 3: (1) RAW Presharpener 3.1.16.288, Copyright ©2000-2014, Google - from the file “SHP3RPS.plugin”
Sharpener Pro 3: (2) Output Sharpener 3.1.16.288, Copyright ©2000-2014, Google - from the file “SHP3OS.plugin”
   Silver Efex Pro 2 2.2.16.288, Copyright ©2000-2014, Google - from the file “Silver Efex Pro 2.plugin”
SkinFilter 2.2.16.288, Copyright ©2000-2014, Google - from the file “SkinFilter.plugin”
SkyFilter 2.2.16.288, Copyright ©2000-2014, Google - from the file “SkyFilter.plugin”
   StrongNoiseFilter 2.2.16.288, Copyright ©2000-2014, Google - from the file “StrongNoiseFilter.plugin”
   Topaz Adjust 5 CS3 (10.0) ©1993-2007 Adobe Systems Incorporated - from the file “Topaz_adjust5.plugin”
   Topaz B&W Effects 2 CS3 (10.0) ©1993-2007 Adobe Systems Incorporated - from the file “Topaz_BW2_Effects.plugin”
   Topaz Clean 3 CS3 (10.0) ©1993-2007 Adobe Systems Incorporated - from the file “Topaz_clean3.plugin”
   Topaz DeJpeg 4 CS3 (10.0) ©1993-2007 Adobe Systems Incorporated - from the file “Topaz_dejpeg4.plugin”
   Topaz DeNoise 5 CS3 (10.0) ©1993-2007 Adobe Systems Incorporated - from the file “Topaz_denoise5.plugin”
   Topaz Detail 3 CS3 (10.0) ©1993-2007 Adobe Systems Incorporated - from the file “Topaz_detail3.plugin”
   Topaz InFocus CS3 (10.0) ©1993-2007 Adobe Systems Incorporated - from the file “Topaz_infocus.plugin”
   Topaz Lens Effects CS3 (10.0) ©1993-2007 Adobe Systems Incorporated - from the file “Topaz_Lens_Effects.plugin”
   Topaz ReMask 3 CS3 (10.0) ©1993-2007 Adobe Systems Incorporated - from the file “Topaz_remask3.plugin”
   Topaz Simplify 4 CS3 (10.0) ©1993-2007 Adobe Systems Incorporated - from the file “Topaz_simplify4.plugin”
   Viveza 2 2.1.16.288, Copyright ©2000-2014, Google - from the file “Viveza2.plugin”
WhiteWindowWorkaround 1.0.5, Copyright 2013-2014 - from the file “WhiteWindowWorkaround.plugin”
Plug-ins that failed to load: NONE
Flash:
   Gallery Wrapper
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

New computer and setting up itunes and sych iphone new to new computer

hi guys,
Just formatted my hard drive i did backup the iTunes folder inthe c:\users\name\my music\c folder e.g. apps music etc and i did also backup the apple computer folder in the c:\users\name\ app data\roaming\applecomputer folder(which has the iPhone and iPad backups in it),
I have just formatted my hard drive how do i restore iTunes? do you just authorise the computer and then click and drag the music folder into iTunes so all the apps and music go into iTunes and then do you copy and paste the apple computer folder (from the app data folder) to the new computers app data folder? then just plug in the iPhone and sych?
http://blog.deversus.com/2011/02/how-to-sync-iphone-with-new-computer-windows-to -mac/
i did some reading and couldn't find much on how to restore iTunes from a backup there is heaps showing how to back it up! I did find this in the apple discussion forum. ( i think its for people who havennt made a copy of the applecomputer folder.
I just want to recover my itunes so i can just plug in my iphone and i dont loose data from when i did the backup 2 weeks ago, i can just plug in and contine like being on my old computerI
(By design, the iphone will sync itunes content with one computer at a time. Any attempt to sync such content with a second computer will result in ALL itunes content being first erased from her phone & then replaced with the content from the second computer. This is a design feature and cannot be overridden. Because you are replacing your GF's computer, her phone will see this computer as a "new" computer. The itunes content sync is one way: computer to phone. If you have photos that were synced to her phone or music ripped on her own that were not backed up, you will first have to extract them from her phone using third party software, before you do anything else, as Apple makes no provision to do so:
http://www.wideanglesoftware.com/touchcopy/index.php
Once you've done that, do the following in the order specified:
1. Disable auto sync when an iPod/iPhone is connected under Preferences>Devices in itunes(under the edit menu if using Windows).
2. Make sure you have one contact & one event in the supported applications(Address Book, iCal) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
3. Connect her phone, iTunes running, do not sync at this point.
4. Store>Authorize this computer.
5. File>Transfer Purchases(To make sure all purchased content on her phone will be in her itunes library).
6. Right click in the device pane & select reset warnings.
7. Right click again and select backup.
8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore her itunes content, which you select from the various tabs, You'll get a popup regarding her contacts & calendars asking to merge or replace, select merge.)
What do you guys reckon?
Thanks!

This is the process I would have recommended:
Backup your library using this User Tip.
Deauthorise the old computer if you won't be using it for iTunes.
Restore the library into the music folder on the new computer.
Install iTunes and sign in to your account.
For the "restore" process you can either just copy the backed up iTunes folder into the new computer or install and set up SyncToy to manage the transfer. If you install iTunes before restoring the library then you should delete/rename the existing empty iTunes library in your profile's music folder first.
Reconnecting an old iOS device backup set into a new iTunes installation is actually quite tricky, but provided the library has been properly conserved it is an unnecessary step. A library transferred as outlined above will be the same library the device was previously synced with, albeit on a different computer/operating system, and there should be no problem syncing media or apps. Info content such as calendar and contacts may need a little more care to make sure the same applications have as used previously have been installed and their data restored to them.
tt2

Finding duplicates:Minus set operator in dealing with internal tables

Dear experts,
I am newbie to ABAP developement,i have been given an assignment to find the duplicate list of vendors in lfa table.
Now duplicate list doesnot means that text tokens will be just exact to conclude them as duplicate ,it could also be like
1111 Vendor ABC
1222 ABC Vendor
If anybody has clue ,how to work on such a problem ,plz come forward.
Right now i just tried initially how to find exact duplicates,i found on change command,it do works.
Then i am trying a new way which should just do the same thing.
I did as per this algorithm
1.Compute wholesome list in one internal table itab1
2.Used delete adjacent duplicates in itab2.
3.I feel itab3=itab1-itab2 will contain all duplicates in itab3.
Can anyone give me a hint.How can i do A-B ?.

Hi Arul,
There is no special aided SET operations upon internal tables in ABAP. Concerning your particular task I would say that you can try INSERT statement for each record in your internal table without preliminary comparing them with DB table. If there is a record in DB table with the same key then sy-subrc after INSERT will be non zero (actually 4) and no real insert would occur. So, only those records would be inserted which have no counterpart in DB table.
Best regards, Sergei

Mapping - split followed by set operation

Hi I'm trying to set up a mapping to use as part of testing my warehouse and need some help.
Overview
======
I have a number of different databases that combine through to my operational data store. One verification of our mappings is a simple check of record counts, source table vs target.
Because table names differ between source and target I have loaded (from a flat file) a translation table that maps one table name to another.
I have external SQL scripts that run on a scheduled basis to capture table names, record counts and date of last update from the system tables of four of my source databases and my target database. (soon I'll need to try and replace these with OWB scripts)
I am trying to build a mapping to conform these so I end up with a single fact listing target table, record count, update date, source table, source environment, record count, update date.
I have taken my statistics on the target database, outer Joined it to the translation table (not all target tables have matching translation table records)
Then split the result set by target environment (and remainder)
Then I join each result set to the statistics for the appropriate source.
Next I am using a set operation to union all the results back to my conformed result.
My Problem
=========
Those tables in the target database that do not correspond to a table in one of the four sources cause a problem. (they are either summary facts, flat files loaded or sourced from other databases I have not got statistics on yet)
I cant just link from the splits output set to the set operation because the other joins have added extra fields for number of records in the source. The documentation is very clear that the same fields must exist in the same order and datatype.
I have been trying to work out which mapping operation/s will produce the equivalent of SQL like select col1, col2, null, sysdate, null from mytable
Hmm as I type this up I think another alternative may be to output extra fields in the split (so it looks like the dataset after the join) but not to pass these fields on in the join for sets for specific environments. Ill try that alternative but would still like help with which mapping operator I could have used.

Can I have a little bit more technical information : A small exmaple would be very helpful.
Regards
-Arnab

Oracle 10g - Set Operator Union Causing Timeout Network problem

Purpose is to get all of the customers not contacted given a starting date and current date(sysdate). The problem is a timeout issue because the query is inefficient. Example: A salesman has 6,946 rows returned from the cust table where his salesid =1163. Then the inner query:
‘SELECT count(Customer_ID) FROM cust_info WHERE info_type_id = 32’
returns 225505 rows just based on this info_type_record.
Next, ‘SELECT c.customer_id
FROM customer c,
    event e
WHERE c.salesperson_id = 1163
AND e.eventdate BETWEEN '10-Feb-2010' AND TRUNC(SYSDATE)
AND c.customer_id = e.customer_id
GROUP BY c.customer_id’
Returns 231 rows
Finally, ‘SELECT c.customer_id
FROM customer c,
    note n
WHERE c.salesperson_id = 1163
AND n.created_date_time BETWEEN '10-Feb-2010' AND TRUNC(SYSDATE)
AND n.note_type_id IN (1,3,4)
AND c.customer_id   = n.pk_id
AND n.table_name    = 'CUSTOMER'
GROUP BY c.customer_id’
Returns 399 rows.
How can I improve the structure of this query(see bottom)? The following is a sample data structure:
CREATE TABLE "CUST "
   (     "CUST_ID" NUMBER,
     "SSN" VARCHAR2(9),
                  "SSN_TYP" NUMBER(1,0),
     "CREATED_DTE_TME" DATE,
     "FULLNAME" VARCHAR2(110),
     "F_NAME" VARCHAR2(35),
     "L_NAME" VARCHAR2(40),
     "BDTE" DATE,
     "DCEASED_DTE" DATE,
     "SALES_ID" NUMBER DEFAULT NULL,
     "BRNCH_ID" NUMBER,
     "HOME_BRNCH_ID" NUMBER,
     "TTL_ASSETS" NUMBER,
     "TTL_ASSETS_DTE" DATE,
     "NO_MAILINGS" NUMBER(1,0),
     "NO_CALLS" NUMBER(1,0) ) ;
CREATE TABLE "CUST_INFO"
   (     "CUST_INFO_ID" NUMBER,
     "CUST_ID" NUMBER,
     "INFO_TYPE_ID" NUMBER ) ;
CREATE TABLE "EVENT"
   (     "EVENT_ID" NUMBER,
     "EVENTDATE" DATE,
     "CUST_ID" NUMBER,
     "SALES_ID" NUMBER,
                  "EVENT_INFO" VARCHAR2(4000) )
ENABLE ROW MOVEMENT ;
CREATE TABLE “NOTE"
   (     "NOTE_ID" NUMBER,
     "NOTE_TYPE_ID" NUMBER DEFAULT 0,
     "TABLE_NAME" VARCHAR2(50),
     "PK_ID" NUMBER,
     "CREATED_DTE_TME" DATE ) ;
INSERT INTO CUST VALUES(20151,'009529433',1,'01-MAY-5','FRENCH','D','M','01-DEC-01', '05-JUN-05',1163,
NULL,0,NULL,NULL,NULL,NULL)
INSERT INTO CUST_INFO VALUES (15,1001,32)
INSERT INTO EVENT VALUES (5,'05-MAY-05',1001,1163,'NONE')
INSERT INTO NOTE VALUES (100,2,'CUST',1001,TRUNC(SYSDATE))
SELECT CUST.CUST_ID,
SSN,
F_NAME,
L_NAME,
CREATED_DTE_TME ,
TTL_ASSETS,
BRNCH_ID,
SALES_ID ,
BDTE,
SSN_TYP,
FULLNAME,
Home_BRNCH_ID ,
No_Mailings,
No_Calls,
DCEASED_DTE,
TTL_ASSETS_DTE
FROM CUST
WHERE SALES_ID          = 1163
AND CUST.CUST_ID NOT IN (
(SELECT CUST_ID FROM cust_info WHERE info_type_id = 32
UNION
(SELECT c.CUST_ID
FROM CUST c,
    event e
WHERE c.SALES_ID = 1163
AND e.eventdate BETWEEN '10-Feb-2010' AND TRUNC(SYSDATE)
AND c.CUST_ID = e.CUST_ID
GROUP BY c.CUST_ID
UNION
(SELECT c.CUST_ID
FROM CUST c,
    note n
WHERE c.SALES_ID = 1163
AND n.CREATED_DTE_TME BETWEEN '10-Feb-2010' AND TRUNC(SYSDATE)
AND n.note_type_id IN (1,3,4)
AND c.CUST_ID   = n.pk_id
AND n.table_name    = 'CUST'
GROUP BY c.CUST_ID
AND CUST.ssn           IS NOT NULL
AND CUST.DCEASED_DTE IS NULL
{code}
Any guidance is appreciated!

It’s not problem with SET operator. while you are using date field in where clause, U must use date conversion function, otherwise it will stuck there
Here is the right sql, U can try with this
SELECT cust.cust_id, ssn, f_name, l_name, created_dte_tme, ttl_assets,
brnch_id, sales_id, bdte, ssn_typ, fullname, home_brnch_id,
no_mailings, no_calls, dceased_dte, ttl_assets_dte
FROM cust
WHERE sales_id = 1163
AND cust.cust_id NOT IN (
(SELECT cust_id
FROM cust_info
WHERE info_type_id = 32)
UNION
((SELECT c.cust_id
FROM cust c, event e
WHERE c.sales_id = 1163
AND e.eventdate BETWEEN to_date('10-Feb-2010','dd-mon-rrrr') AND TRUNC (SYSDATE)
AND c.cust_id = e.cust_id
GROUP BY c.cust_id)
UNION
(SELECT c.cust_id
FROM cust c, note n
WHERE c.sales_id = 1163
AND n.created_dte_tme BETWEEN to_date('10-Feb-2010','dd-mon-rrrr') AND TRUNC
(SYSDATE)
AND n.note_type_id IN (1, 3, 4)
AND c.cust_id = n.pk_id
AND n.table_name = 'CUST'
GROUP BY c.cust_id)))
AND cust.ssn IS NOT NULL
AND cust.dceased_dte IS NULL;

LV 5.0 and Set Operations

Similar Messages

Maybe you are looking for