LV 7 upgrade - VXI word serial problems

We are trying to upgrade some software that was written with LV 5.0.1 on WIN NT, using Labview 7 on a PC running WIN 2K pro. After re-compiling, the Corelis CVXI-JTM VXI module(message based) drivers delivered the error in a one button dialogue " VI Corelis Setup.vi was stopped at node 0x6D4 of subVI 'WScmd.vi'." We've tried substituting the 'OLD' WS commander vis with the same results. Using VISA VXI cmd or query to substitute in the VI, I received the error "Could not perform operation because of IO error".
Any suggestions why this might be occurring, or possible solutions you could give would be helpful.
Thanks,
Enzo

Hello Enzo,
When you upgraded from LabVIEW 5.0.1 to LabVIEW 7 did you also perform a driver update? If so, then you may have installed drivers, such as VISA, for example, which are not compatible with the Corelis driver you are using. Our drivers have changed significantly since LabVIEW 5.0.1 and they may simply not work with your Corelis VIs. If you did perform a driver upgrade, you may want to contact Corelis and check that the new NI driver versions are compatible with the version of their driver which you are using.
You may find the current versions of all NI software installed on your computer by launching the Measurement & Automation Explorer program and viewing the Software tab. You can also view software versions from the Windows Add/Remove Progr
ams icon in your Windows Control Panel.
Best Regards,
Justin Britten
Applications Engineer
National Instruments

Similar Messages

Any Issues Upgrading from Word 2003 to 2007?

Hello. We have the option in my department to upgrade from
Word 2003 to Word 2007. My team still has some help projects in
RoboHelp for Word. Before we decide to upgrade, I was wondering if
anyone else using RoboHelp 7 (for Word) has upgraded to Microsoft
Word 2007, and if they have encountered any issues. Thanks for any
input.

Thanks for all the helpful feedback, everyone. Here's an
update, just fyi. I loaded Office 2007 today, and seem to be
encountering one of the issues described by David Hurlston. When I
try to create a new popup, it takes a little over one minute for
the Insert Popup window to appear. Then when I select the topic to
which I want to link and click OK, it takes another 10 seconds or
so for the link to appear.
I also received the "Microsoft Office Word has encountered a
problem and needs to close" error five times in the past hour, when
just trying to add new topics. I ran Microsoft Office Diagnostics,
and it was unable to diagnose the cause of the crash. I'm using
RoboHelp for Word 7.0, Build 7.02.001. (I have the full Adobe
Technical Communication Suite with all of the latest updates
installed, and just loaded Office 2007 today, along with all of the
latest Windows and Office updates.)
This is the perfect time for our team to upgrade to Office
2007 since we're at the very beginning of a release, so I'm going
to continue testing to see if I can figure out why it's a bit
sluggish and why it's crashing. I just wanted to follow up on my
original post in case any of this info is helpful.
On a semi-related note... I'm usually pretty good about
finding my way around in new user interfaces, but it took me about
ten minutes to figure out how to access the Insert Popup window
(due to the new Word UI). If anyone knows of a handy reference
guide for people upgrading to RoboHelp for Word 2007, let me know.
I checked the LiveDocs for RoboHelp for Word, but the version I
found currently contains the old icons I'm used to. (I'm hoping to
find some type of quick reference that explains where to find
things that have moved and/or changed icons. I found a great
interactive tool on Microsoft's site, but it seems to be specific
to Word docs, without addressing the RoboHelp-specific options.)
Thanks again for all the input!

How does one update Flash? I currently cannot watch videos on You Tube, it says I need to upgrade, I have no problem doing this on a PC.

How does one update Flash? I currently cannot watch videos on You Tube, it says I need to upgrade, I have no problem doing this on a PC.

If you're not using chrome you can just go to adobe's website (http://get.adobe.com/flashplayer/) and download the newest flash player. You run the .dmg and then open the application, which updates flash. With the latest version of flash there should be a preference pane within system preferences to allow you to change settings and check for updates.

I run Tiger OSX on one MacBook and SnowLeopard on another. Photos were downloaded from Tiger to SnowLeopard, and now iPhoto won't open on the Tiger Mac. Will upgrading iPhoto fix this problem?

I run Tiger OSX on one MacBook and SnowLeopard on another. Photos were downloaded from Tiger to SnowLeopard, and now iPhoto won't open on the Tiger Mac. Will upgrading iPhoto fix this problem?

What matters is the version of iPhoto you have on the different machines. Can you tell us what they are, and what exact error message you get.
Regards
TD

7.01 to 7.3 Upgrade - Logon Screen - "Logon Problems? Get Support" occuring

Hi
We have upgrade our ABAP and JAVA stacks from NW 7.01 to NW 7.3.
After the upgrade is the "Logon Problems? Get Support" occuring on our portals logon screen. In 7.01 this was controlled with the parameter ume.logon.logon_help - however after the upgrade we do not see this parameter anymore.
Screen dump (requires a couple of clicks)
http://www.filefactory.com/file/c26d20b/n/Portal_Logon_Page_Issue.jpg
Any idea about how we remove the "Logon Problems? Get Support" part?
Thanks and kind regards,
Torben

Hi Torben,
On my fresh 7.3 installation, everything is clean and ... fresh ...
So, for example, the built in group AnonUsers only has the user Guest as it's solely relation (no parent, no child groups); the guest user has the Guest role, which has (via it's groups) roles Everyone and Guest; onbly the role Everyone as got UME actions.
All together, this sounds much like an upgrade issue (on my fresh 7.3, there is no group "J2EE_GUEST" at all).
Two possibilities to go:
- Open an OSS message (should be done in any case probably, to report this issue to SAP, so that this can be fixed);
- Check the UME consistenty by yourself (http://help.sap.com/saphelp_nw73/helpdata/en/44/aecb4253217037e10000000a422035/frameset.htm)
Maybe the second point already will fix some things; would be great for you, anyhow, I still would advise to report this issue officially to SAP.
Hope it helps
Detlev

After upgraded ios6 i got problem with whatapp. "last seen" function is not working

HI eveyone
after upgraded ios6 i got problem with whatapp. "last seen" function is not working .. it's doest show last seen who enter the chat . is anyone have the same problem .. i even restore and reinstall to my ph but it's not work .. if someone know how to fix it, plz tell me how to do .. thanks

Also, when I check this post several times a day, I always see warning 'Connection is untrust'. If I close browser and reopen immediately everything is ok.

Is it possible to upgrade from 500GB Serial ATA Drive @ 5400 rpm to ssd on the new 13" 2012 macbook pro?

is it possible to upgrade from 500GB Serial ATA Drive @ 5400 rpm to ssd on the new 13" 2012 macbook pro?

New non-retina 15" MBP, I just replaced the 500 gb HD with a Samsung 830 256 gb SSD from Amazon, $255 for the kit (includes a USB cable). Wow. What a difference. Yes, there was a learning curve for some of it, but was so worth it. Let me know if I can help. I'm using the 500 gb in 2 partitions - one for a clone of the SSD, and one for Time Machine.

TS1702 I upgraded my Words with Friends HD from the free app to the paid version. Can I transfer my existing games to new app?

I upgraded my Words with Friends HD from free version topaid version. Can I transfer my existing games to the new version?

Your games are stored on the Words with friends server, they should automatically load into your updated app when you sign in / login.

My iphone 5s have problems with the battery to upgrade to IOS8, the problem is that low battery level quickly since I upgraded to IOS8.

My iphone 5s have problems with the battery to upgrade to IOS8, the problem is that low battery level quickly since I upgraded to IOS8.

recalibrate your battery.

I really am struggling to like the upgrade, but the screensaver problems are awful...I have tried most of the solutions offered here, and the problem still persists...PLEASE fix it, Apple. I wish I had not upgraded my ipad.

I am really struggling to like this upgrade, but the screensaver problems are so disappointing...I have tried most of the suggested solutions but the outsized photo problem still persists on my ipad. Pretty close to a deal breaker! Please fix this, Apple. I really wish I had not upgraded...can it be undone? I really dislike the camera roll, too : (

No one from Apple monitors these forums, so it isn't the place to voice complaints or suggestions. Go here:
http://www.apple.com/feedback/ipad.html
It's the best place to make complaints, recommendations, or just mention stuff.
There's a screensaver with iOS? I don't think so.

Acrobat 8 Professional not finding CS2 products to authorize upgrade. Had this problem before Windows 8; have 2 sets of serial

When I initially purchased CS2 new I did have this very problem w/ Acrobat 8 Professional install not finding the CS2 products to authorize the upgrade product serial numbers. I actually have 2 sets of serial numbers dervived from this problem but neither are working.
I recently reinstalled CS2 on a Windows 8 system using Adobes files & instructs all of which are working find. I just need help getting the Acrobat 8 Professional installed.

Nevermind... I figured it out on my own. I merely installed via trial and then used 1 of the serial #'s and located my very old version 5 serial number... problem solved. Even with the missing AdobePDF.dll file, I managed to find that and fix that as well.

Serial problem after upgrade to 2010

Hi all,
I've upgraded my LabVIEW base package (including application builder) from 7.1 to 2010 (SP1). I've recompiled my programs and installed them together with a runtime engine (serial support included) on an other computer (Win XP prof. SP3). Now my problem:
If I log on as administrator, everything runs ok, the "old" 7.1 programs as well as the "new" 2010 ones.
If I log on as normal user, the programs run, but the serial communication does not work. Neither the new 2010 ones, nor the old 7.1 ones, which used to work without any problems on this computer before the installation of the new runtime engine.
Loggin on as admin is a short-time fix in order to continue working, but this is not a permanent option.
Any hints?
Thanks,
Toni
Solved!
Go to Solution.

Photometer wrote:
josborne02 wrote:
Yes, that could be it.
No offense, but if your program had error checking, it would allow you to more closely isolate the cause of the error. Right now, we can only guess ... e.g. " I have no clue where/what to check".
Just change the code to route the error cluster through all your functions and then output the cluster to an indicator or the "simple error handler.vi".
It seems to work now. Thanks for giving me a nudge into the right direction. Here the short version of what I did:
The error cluster gave the error BFFF009E (a code libray required by VISA could not be located). A search in the discussion forum did not help very much as most links led to pages like "You are not authorized to view this document". I was sure, I had the VISA runtime installed, so I did a "repair" of the runtime within MAX. This did the trick.
Thanks again
Toni
I just wanted to give an update on this issue, as we think that we have found the underlying cause of this behavior.
Repairing the runtime with MAX did indeed fix the problem, but only for a few hours or a day. Then it popped up again and the non-admin user got the BFFF009E VISA error.
We finally found out, that out IT department had a group policy on the directory "C:\Dokumente und Einstellungen\All Users\Anwendungsdaten" (this is a German installation, in English it would probably be something like "C:\Documents and Settings\All Users\Application Data") which allowed the user "Jeder" ("Everyone") only reading rights. A new installation or a repair gives full rights. After removing the subdirectory "National Instruments" from the group policy, the problems disappeared.
Toni

Upgrade Serial problems

I am hoping that someone out there is having the same issue as I am with upgrading from 1.5 to 2.0. I have a full version of 1.5. I bought the upgrade today and just got my serial number from Apple in my email.
I applied the new serial and then it asked for the previous serial and I entered that. Then an error message comes up stating that the number was incorrect. If it was incorrect it would not allow me to use it to run a 1.5 version.
Help please.

I started thinking it was weird that I didn't have to enter the original serial number, so I went back and deleted and started over. This time I was prompted for the original number and the program then asked if I wanted to import my 1.5 library, which it didn't do the first time around. Guess something was messed up in the first upgrade. (BTW, make sure you enter all the caps and dashes when entering the number. I imagine you know that, but I tried to be lazy and not do it and it said the number was invalid.)

Since I upgraded, I am having problems with words coming out wrong. For example, it is supposed to say "Who's Online in the last 15 minutes;" it actually says "Xip(t pomjof jo uif mbtu 26 Njovuft;" but when I copy and paste, it comes out correct.

This is happening at a web site group I belong to, and it is only happening on a couple of certain pages that I can tell so far, not the whole web site. It doesn't happen if I go to that site using IE, so it has to be something in Firefox. I have tried looking at the font information, but that seems correct. I don't know how to fix this, but I can't read some of the words on this site anymore.

This is happening at a web site group I belong to, and it is only happening on a couple of certain pages that I can tell so far, not the whole web site. It doesn't happen if I go to that site using IE, so it has to be something in Firefox. I have tried looking at the font information, but that seems correct. I don't know how to fix this, but I can't read some of the words on this site anymore.

I would like to upgrade to the next step, but because I have many problems with the version 10.4.11, I'm worried that upgrading would create more problems.

Due to a misunderstanding with [email protected] in September of 2010, many of my applications and important files were put into the trash during a cleaning. The trash hadn't been deleted, so a CleanApp rep told me to drag my important files to a folder on my desktop. They were unable to help me with anymore advice with the exception that if I followed the pathway of the application, I could manually restore it to its proper location.
This was asking a lot of me because I didn't have the experience or knowledge of undertaking such a massive restoration. However, I did the best I could. What had been put in the trash was not just a few files -- there were hundreds of files or apps that I discovered in the trash. As I said, this was a misunderstanding. I was left feeling devastated at what had happened.
Since then, my iMac Intel Core Duo has been running on its last legs. I'm surprised I can even get to my email. As far as using the software that I bought with my iMac, I can't. I just do the basics.
What I have been wanting to do is to upgrade to the next level. However, I worry that if I upgrade a crippled OS X 10.4.11 Tiger, I would be creating more problems than what I already have. Do you agree that an upgrade would make matters worse?

It won't necessarily make it worse, but may not make it better. I am not familiar with the utility you usedm though anything that cleans or maintains your Mac should be avoided unless you know what you are doing and what it does. Probably re-installing software from the official sources (download or CDs) is the best way to ensure missing parts are all replaced.
If this is a core duo and not a core 2 duo then the highest you can go is Snow Leopard 10.6 Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac", then "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).

LV 7 upgrade - VXI word serial problems

Similar Messages

Maybe you are looking for