LV Application Builder: solving "The system cannot find the file specified." error?

Hello everyone,
I don't mind banging my head off of something that feels complex but it's always frustrating to be stumped by something that seems simple... I have LabVIEW 2014 and Application Builder. I've built an program that runs flawlessly as a VI, then compiles and runs flawlessly as a .exe. But I can't seem to get the installer to work. I get the following error:
Per the suggestions in this thread and this KB article, I created a new installer build spec, then a new application build spec, then a new project with all my VIs in it, building and testing the installer at each step. None of that seemed to make a difference.
I ran the installer as admin, I created the install directories ahead of time (in case it didn't have the privileges to create folders), and built an installer without the Run-Time in it. None of that worked either. Lastly, I played around with putting all my subVIs in a library.
So since the tutorial worked I'm assuming that it's some quirk in my program. Does anyone have any experience or advice as to what specific aspects of a program play nice with the AB installers? It's one primary VI, less than a dozen subVIs, a few Type Defs, and no hardware integration. Seems like a pretty straightforward and simple program but maybe something in there is persona non grata with Application Builder?
Xander Cesari
Automotive/Internal Combustion Test Engineer
CLAD certified, mainly focused on data acquisition
Been LabVIEWing for a few years, still a lot to learn
Solved!
Go to Solution.

Hello,
Thanks for the response. Nope, I'm running it from a regular directory, in the same folder as the rest of my project. Here's the project window showing the folder directory:
Xander Cesari
Automotive/Internal Combustion Test Engineer
CLAD certified, mainly focused on data acquisition
Been LabVIEWing for a few years, still a lot to learn

Similar Messages

Error message when starting: McShield.dll: the system cannot find the file specified - what do I do to solve this?

When I start Firefox, the following message appears before the home page opens:
"COMMONSHELL: McShield.dll
The specified resource language ID cannot be found in the image file.
McShield.dll: The system cannot find the file specified."
I click OK, Firefox opens normally and everything seems to operate as expected, no further problems.

hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

While loading site collection in SharePoint 2010, Error shows "Could not find the file or assembly or one of its dependencies. The system cannot find the file specified."

I have restored one web application in SharePoint Server 2010 from a different domain and can complete successfully. Changed each users domain also to old to new one by using Move-SPUser. But While accessing the site collection it is showing an error
that "Could not load file or assembly 'A##.SP.Intranet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=03b4f320ebedaffc' or one of its dependencies. The system cannot find the file specified."
What may be the reason? Please help me to solve this issue since I am stuck up on this .
Regards
Mine1981

Hi Nico
Martens,
Thank you for your reply. But
how can I find out the custom solutions in the source farm. I didn't got any other details regarding this farm other than WSS_Content, Web application Database, SharePoint_Config database back ups.
Please help me to solve the
issue.
Regards
Mine

Java.lang.Error: java.util.zip.ZipException: The system cannot find the fil

I got maven 221 installed
i got jdk 1.6 and 1.5 installed (have tested both)
I have a strange error. All my co-workers can build but I cant. The only thing I can find is that I dont have installed BEA Weblogic but I dont want to have that installed. It should be able to run anyway.
Could someone tell me what is wrong? If you need pom.xml I got that one as well.
process-classes:
[copy] Copying 4 files to C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-content
[mkdir] Created dir: C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-jar
[java] Creating an MJF from the contents of directory C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-content...
[java] Compiling the files...
[java] Creating the list.
[java] Doing the compile.
[java] WLMaker-SubProcess: : Exception in thread "main" java.lang.Error: java.util.zip.ZipException: The system cannot find the file specified
[java] WLMaker-SubProcess: :      at weblogic.management.commo.BeanGenDriver.getManagementTempDir(BeanGenDriver.java:93)
[java] WLMaker-SubProcess: :      at weblogic.management.commo.BeanGenDriver.main(BeanGenDriver.java:117)
[java] WLMaker-SubProcess: : Caused by: java.util.zip.ZipException: The system cannot find the file specified
[java] WLMaker-SubProcess: :      at java.util.zip.ZipFile.open(Native Method)
[java] WLMaker-SubProcess: :      at java.util.zip.ZipFile.<init>(ZipFile.java:203)
[java] WLMaker-SubProcess: :      at java.util.jar.JarFile.<init>(JarFile.java:132)
[java] WLMaker-SubProcess: :      at java.util.jar.JarFile.<init>(JarFile.java:97)
[java] WLMaker-SubProcess: :      at weblogic.management.commo.BeanGenDriver.getManagementTempDir(BeanGenDriver.java:90)
[java] WLMaker-SubProcess: :      ... 1 more
[java] WLMaker-SubProcess: : Stopped draining WLMaker-SubProcess:
[java] WLMaker-SubProcess: : Stopped draining WLMaker-SubProcess:
[java] BeanGen code generation failed
[HUDSON] Archiving C:\hudson\jobs\albpm_ip-identity-asserter_-Build\workspace\pom.xml to C:\hudson\jobs\albpmip-identity-asserter_-Build\modules\dk.skat.ip.integration.albpm$ip-identity-asserter\builds\2010-11-2213-41-28\archive\dk.skat.ip.integration.albpm\ip-identity-asserter\1.2\pom.xml
[INFO] ------------------------------------------------------------------------

from my experience, using weblogic jars can be a pain if the full install is not on the local box.
Note that you dont have to 'install' it. Just copy the directory.
Reason is that the jar files have manifests with relative classpaths.
For an example of horror take a look at the weblogic.jar MANIFEST's classpath entry.
-Fred

Upgrading to MBAM 2.5: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0.....the system cannot find the file specified.

Upgrading from MBAM 1.0 to 2.5 on the Administration and Monitoring server (database server already upgraded). To upgrade the administration server, I uninstalled MBAM 1.0 -> Deleted the MBAM website from IIS manually -> Reboot -> Installed MBAM
2.5. After upgrade if I go to selfservice portal via
https://myserver.mycompany.com/selfservice, I get this error:
Server Error in '/SelfService' Application.
Could not load file or assembly 'System.Web.WebPages.Razor,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its
dependencies. The system cannot find the file specified.
Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code.
Exception Details:
System.IO.FileNotFoundException: Could not load file or assembly
'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot
find the file specified.
Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:
[FileNotFoundException: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.]
System.Web.Mvc.PreApplicationStartCode.Start() +0
[InvalidOperationException: The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
System.Web.Compilation.BuildManager.InvokePreStartInitMethodsCore(ICollection`1 methods, Func`1 setHostingEnvironmentCultures) +12980619
System.Web.Compilation.BuildManager.InvokePreStartInitMethods(ICollection`1 methods) +12980328
System.Web.Compilation.BuildManager.CallPreStartInitMethods(String preStartInitListPath, Boolean& isRefAssemblyLoaded) +280
System.Web.Compilation.BuildManager.ExecutePreAppStart() +172
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +1151
[HttpException (0x80004005): The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12979668
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12819261
Anyone know how to solve this? Thanks in advance

Sorry for late response. I fixed the issue by installing the correct version of ASP .NET 4 from
here.
If .NET Framework 4.5 is already installed, also run aspnet_regiis -i from C:\windows\microsoft.net\Framework\v4.0.30319

The system cannot find the file specified. (Exception from HRESULT: 0x80070002)

I m getting this error on page load of visual webpart added to the sharepoint site.What could be the issue??I m getting this error like in dev and not in test environment..What could be the issue??
The system cannot find the file specified. (Exception from HRESULT: 0x80070002)

could you please share complete stack trace of the error, there could be differnt reason for this error?
share the stack trace and also check the ULS logs.
did you try to redeploy the webpart( completely removing and re adding)?
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

"The system cannot find the file specified" - New to MVSE 2013

Hey all,
I have downloaded Visual Studio Express 2013 for Windows Desktop and am currently working my through the introduction sessions on: http://www.cplusplus.com/doc/tutorial/program_structure/
I did not get far before i encountered this error whilst trying to run my segment of code. I am completely new to all this so please bear with me :)
The error window said:
"Unable to start program 'c\users\username\documents\visual studio 2013\Projects\ConsoleApplication1\Debug\ConsoleApplication1.exe'.
The system cannot find the file specified.
Would love some simplified help please if this is indeed the right area of the forum to post this in.
Many thanks!

Hi Jono112,
>>"Unable to start program 'c\users\username\documents\visual studio 2013\Projects\ConsoleApplication1\Debug\ConsoleApplication1.exe'.
Based on your issue, to check if the issue is related to the VS IDE or your specified C++ project, I suggest you can refer the following MSDN document to check if you get same issue.
https://msdn.microsoft.com/en-us/library/ms235629.aspx
(1)you get same error in the new c++ console application, maybe you will need to repair or re-install the VS2013 check this issue again.
(2)If you did not get the issue in the new c++ console, so I suggest you try to clean and build your c++ console application, then debug it again.
Or you can upload your C++ console application to OneDrive and then copy link here, we will reproduce your issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The System cannot find the file specified (0x80070002) backing up

HP Pavillion G6, Win 7 Home Premium 64-Bit
When I try to set up Backup, I get the Error message " The system cannot find the file specified (0x80070002)", Using a 160GB External HDD, Tried backing up to DVD Drive.
I have tried tweaking the settings to just backup certain component, I am at a loss now, Really need to back up.
Thanks in advance

Hi,
What program are you using to backup? Are you creating a system image or just some other files.
There is a Blog from the storage team at Microsoft that may have the answer to the issue. It covers common issues and solutions to backup problems.
I recommend using the free or paid version of Paragon Software's Backup & Recovery 2012. It is more reliable than the Windows built in backup program and simpler to use. Free backup programs .
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Error message "The system cannot find the file specified." when reinstalling C3180 drivers

Hello,
I experienced scanning problems with my C3180 and the error message indicated several solutions, including to reinstall the driver.
I worked my way through the list of fixes to this option. I uninstalled the drivers, downloaded
File name:
AIO_CDA_NonNet_Full_Win_WW_130_140.exe [1/1, 290.27M]
from www.hp.com/support and attempted to install.
Just after the accept licensing screen, the system begins a screen with four steps, the first of which is Checking System. Shortly after starting this, I receive the error message "The system cannot find the file specified.". The file name may be in the message header, but I cannot determine it due to the path length. It is off the displayed screen. (see screen image capture)
Closing the pop-up error message or clicking OK terminates the installation.
I am re-installing on a Dell Latitude E6510, running Windows 7 Professional, Service Pack 1, 64 bit. The printer was connected via USB, but I have disconnected for this stage of the install.
I appreciate any assistance/advice you can offer.
Kelly

Hi justkelly,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are getting errors when attempting to install the printer to your computer.
I have a link that I would like you to click on. In the steps on the link, please do step 1 and step 2 seeing that you are using Windows 7.
Installation issues.
Please let me know if this resolved your issue. I will be more than happy to offer more assistance if the link does not resolve your issue.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Obfuscation Error: C:\Documents (The system cannot find the file specified)

Hi,
I want to obfuscate my jar file. for this purpose i followed the steps below.
1. Copied proguard.jar in C:\WTK2.5.2\bin
2. Now opened the file ktoolbar.vm , which is present in C:\WTK2.5.2\bin
my ktoolbar.vm looks like this
{color:#666699}C:\PROGRA~1\Java\JDK16~1.0_0\bin\java -Dkvem.home="%KVEM_HOME%" -Djava.library.path="%KVEM_HOME%/bin" -Dsun.java2d.ddlock=true -Dsun.java2d.gdiblit=false -cp "%KVEM_HOME%/wtklib/kenv.zip";"%KVEM_HOME%/wtklib/ktools.zip";"%KVEM_HOME%/bin/JadTool.jar";"%KVEM_HOME%/bin/MEKeyTool.jar";"%KVEM_HOME%/wtklib/customjmf.jar";"%KVEM_HOME%/lib/j2me-ws.jar";"%KVEM_HOME%/lib/j2me-xmlrpc.jar";"%KVEM_HOME%/bin/schema2beansdev.jar";"%KVEM_HOME%/bin/j2me_sg_ri.jar";"%KVEM_HOME%/bin/jaxrpc-impl.jar";"%KVEM_HOME%/bin/jaxrpc-api.jar";"%KVEM_HOME%/bin/jaxrpc-spi.jar";"%KVEM_HOME%/bin/activation.jar";"%KVEM_HOME%/bin/mail.jar";"%KVEM_HOME%/bin/saaj-api.jar";"%KVEM_HOME%/bin/saaj-impl.jar";"%KVEM_HOME%/bin/xsdlib.jar";"%KVEM_HOME%/wtklib/nist-sip-1.2.jar";"%KVEM_HOME%/wtklib/JainSipApi1.1.jar";"%KVEM_HOME%/wtklib/jain-sip-presence-proxy.jar" com.sun.kvem.toolbar.Main{color}
3. my project or my workspace is at location D:\workspace\WTK
4. Also my wtk is located at C:\WTK2.5.2
5 Now i renamed ktoolbar.vm to ktoolbar.bat and the edited the file then added 2 lines at the beginning of ktoolbar.bat
SET USER_HOME=D:\workspace\WTK
SET KVEM_HOME=C:\WTK2.5.2
6 Also i added -Duser.home=%USER_HOME% in the next line.
7 Now my ktoolbar.bat looks like this.
{color:#800080}SET USER_HOME=D:\workspace\WTK SET KVEM_HOME=C:\WTK2.5.2 C:\PROGRA~1\Java\JDK16~1.0_0\bin\java -Dkvem.home="%KVEM_HOME%" -Duser.home=%USER_HOME% -Djava.library.path="%KVEM_HOME%/bin" -Dsun.java2d.ddlock=true -Dsun.java2d.gdiblit=false -cp "%KVEM_HOME%/wtklib/kenv.zip";"%KVEM_HOME%/wtklib/ktools.zip";"%KVEM_HOME%/bin/JadTool.jar";"%KVEM_HOME%/bin/MEKeyTool.jar";"%KVEM_HOME%/wtklib/customjmf.jar";"%KVEM_HOME%/lib/j2me-ws.jar";"%KVEM_HOME%/lib/j2me-xmlrpc.jar";"%KVEM_HOME%/bin/schema2beansdev.jar";"%KVEM_HOME%/bin/j2me_sg_ri.jar";"%KVEM_HOME%/bin/jaxrpc-impl.jar";"%KVEM_HOME%/bin/jaxrpc-api.jar";"%KVEM_HOME%/bin/jaxrpc-spi.jar";"%KVEM_HOME%/bin/activation.jar";"%KVEM_HOME%/bin/mail.jar";"%KVEM_HOME%/bin/saaj-api.jar";"%KVEM_HOME%/bin/saaj-impl.jar";"%KVEM_HOME%/bin/xsdlib.jar";"%KVEM_HOME%/wtklib/nist-sip-1.2.jar";"%KVEM_HOME%/wtklib/JainSipApi1.1.jar";"%KVEM_HOME%/wtklib/jain-sip-presence-proxy.jar" com.sun.kvem.toolbar.Main{color}
8 Now i opened the command promt and i executed the bat file.
9 Now when i try to open the WTK toolkit it gives me the following error
Fatal error : File: C:\WTK.2.5.2\bin\ktoolbar.vm does not exist
Please help me to resolve this issue or suggest me some different way.
Also i would like to tell that my project is completely build using netbeans 6.5 . but when i try to make the obfuscation level high using the scroll that is provided by netbeans , it gives me following error.
{color:#ff0000}C:\Documents and Settings\SShete\My Documents\NetBeansProjects\vtms_test_lwuit_Backup\nbproject\build-impl.xml:459: Error while expanding C:\Documents and Settings\SShete\My Documents\NetBeansProjects\vtms_test_lwuit_Backup\build\obfuscated.jar
java.io.FileNotFoundException: C:\Documents and Settings\SShete\My Documents\NetBeansProjects\vtms_test_lwuit_Backup\build\obfuscated.jar (The system cannot find the file specified)
BUILD FAILED (total time: 8 seconds){color}
Also i dont know what changes are to be done to the build.xml so that obfuscation can be done .
Thats the reason why i am now opening the same project using wtk and trying to obfuscate it.

hi....
i have tried another way out ,
i followed the procedure below
In order to integrate this plug-in in the toolkit, you'll have to put the following lines in the file {j2mewtk.dir}/wtklib/Linux/ktools.properties or {j2mewtk.dir}\wtklib\Windows\ktools.properties (whichever is applicable).
obfuscator.runner.class.name: proguard.wtk.ProGuardObfuscator
obfuscator.runner.classpath: /usr/local/java/proguard/lib/proguard.jar
Please make sure the class path is set correctly for your system.
Once ProGuard has been set up, you can apply it to your projects as part of the build process. The build process is started from the WTK menu bar:
Project -> Package -> Create Obfuscated Package
The Toolkit obfuscates other sample projects
However now my project gets build without errors , but when i try to create a obfuscated package it gives me the following error
Error preverifying class bc
VERIFIER ERROR bc.a(Z)Lhx;:
Incompatible object argument for invokespecial
com.sun.kvem.ktools.ExecutionException: Preverifier returned 1
Build failed
Please help..

Obfuscation error (The system cannot find the file specified)...

Hii....friends
I extracted proguard.jar file in C:\WTK2.5.2\bin\ directory
I edited the following enteries in ktools.properties file as following....
obfuscator.runner.class.name: com.sun.kvem.ktools.RunPro
obfuscator.runner.classpath: C:\WTK2.5.2\bin\proguard.jar
when I create Obfuscated package Error is occured.
Error: C:\Documents (The system cannot find the file specified)
Obfuscation failed.
Build failed
Please help this is very essential for me...my application is incompleted.

I had the same problem)))
My WTK:
C:\Program Files\Java\SonyEricsson_SDK\WTK2My project:
C:\Program Files\Java\SonyEricsson_SDK\WTK2\apps\myprojectMy error:
Error: C:\Program (The system cannot find the file specified)
Obfuscation failed.
Build failedMy solution:
1) Find and open ktoolbar.BAT
2) Replace(Ctrl+H in notepad) all "Program Files" to "PROGRA~1"
Edited by: k06a on Aug 24, 2009 12:16 AM

VSTO.dll The system cannot find the file specified. (Exception from HRESULT: 0x80070002)

Hello,
I'm trying to install a VSTO on a clients machine and get the following error message.
Could this be something wrong with the .Net Version?
Application Domain:    AWAddinInstaller.exe
Assembly Codebase:     update files/AWAddinInstaller.exe
Assembly Full Name:    AWAddinInstaller, Version=9.2.0.14, Culture=neutral, PublicKeyToken=null
Assembly Version:      9.2.0.14
Assembly Build Date:   11/12/2013 12:12:58 PM
Exception Source:      mscorlib
Exception Type:        System.IO.FileNotFoundException
Exception Message:     The system cannot find the file specified. (Exception from HRESULT: 0x80070002)
Exception Target Site: nLoadFile
---- Stack Trace ----
   System.Reflection.Assembly.nLoadFile(path As String, evidence As Evidence)
       AWAddinInstaller.exe: N 00000
   System.Reflection.Assembly.LoadFile(path As String)
       AWAddinInstaller.exe: N 00084
   AWAddinInstaller.AWAddinInstaller.RegisterAddin(forceVSTO As Boolean)
       AWAddinInstaller.exe: N 00602

Hello AntronD,
The installer complained that The system cannot find the file specified. However I'm confused that why the VSTO is related to AWAddinInstaller.exe.
Could you please navigate to your %temp% folder and search for your VSTO logs out and paste it here? I need it to check for details.
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

DPM 2012 SP1 - ID 2033 Details: The system cannot find the path specified 0x80070003.

Seeing a very strange issue on one of servers. Three of the drives are failing the consistency checks with the same type of error.
DPM encountered an error while performing an operation for
\\?\Volume (ID 2033 Details: The system cannot find the path specified (0x80070003))
We have removed the effected drives from the protection group and added them again. We even removed the whole protection group and re-created it. That hasn't helped with the issue.
Wondering if you anyone else might have some thoughts on this? Appreciate your help on this.

Did you get this solved - we're having the same issue. data sources failing on particular folders. delete ds and replica, re-protect and it fails on the same folder/area eventually, although in most cases this seemed to rectify it. It can be user files or
system (winsxs or dedup chunkstore, etc)
If I delete the user files from the protected server that seems to be causuing the dpm server replica trouble then it can help.
AV disabled
Mark

[Prime LMS 4.2.5] "NMSROOT" The system cannot find the path specified

Hi,
I am in the midst to change the admin password for my LMS 4.2.5 using CLI Command.
I stop the Prime Daemon Manager by typing "net stop crmdmgtd" in Command Prompt.
But when I typed "NMSROOT\bin\perl", the message "The system cannot find the path specified" appeared.
May I know how to solve it?
Thanks.

Hi,
C:\Users\Administrator>PATH
PATH=C:\Windows;C:\Windows\system32;C:\Windows\system32\wbem;;C:\Windows\SysWOW6
4\\wbem;C:\PROGRA~2\CSCOpx\objects\smarts\lib;C:\PROGRA~2\CSCOpx\objects\smarts\
bin;C:\Windows;C:\Windows\system32;C:\Windows\system32\wbem;C:\PROGRA~2\CSCOpx\c
ampus\bin;C:\PROGRA~2\CSCOpx\MDC\Apache;C:\PROGRA~2\CSCOpx\MDC\Apache\bin;C:\PRO
GRA~2\CSCOpx\MDC\jre\bin;C:\PROGRA~2\CSCOpx\MDC\bin;C:\PROGRA~2\CSCOpx\lib\jre\b
in\server;C:\PROGRA~2\CSCOpx\objects\db\x64;C:\PROGRA~2\CSCOpx\objects\db\win32;
C:\PROGRA~2\CSCOpx\bin;C:\Windows;C:\Windows\system32;C:\Windows\system32\wbem;C
:\Windows\SysWOW64\\wbemstem32\wbemnects\db\win32;C:\Windows\system32;C:\Windows
;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Windows
;C:\Windows\system32;C:\Windows\system32\wbem;C:\Windows\SysWOW64;C:\Windows\Sys
WOW64\wbem;

Bitlocker "The system cannot find the file specified"

I am trying to get Bitlocker working on the C: drive of a Dell Venue 11 (5130) 32bit, running Windows 8.1Update Enterprise. I click Turn on BitLocker and the system checks the perrequisites and is happy. Then I type in a PIN (6 numbers) and confirm it and
hit Set PIN. At this point it fails with a message saying "The system cannot find the file specified".
I am an Admin on the machine. TPM is working fine. GPO is not setting either BitLocker or TPM to store on the AD DS. Secure Boot is turned on in BIOS. Plus I've tried the reverse of all of these.
I've spent hours reading through web articles without any joy, so I'm hoping someone can give me a pointer. Please.

Hi guys,
Almost have the same problem, and still not able to solve it now [despite lots of search].
I used to have BitLocker working on my laptop, but I removed it before cloning [with Paragon] my SSD to a new and bigger one. When I replaced the SSD the system did not boot, and I had to create a new BCD store by copying UEFI boot files from the system
directory on fix the UEFI boot partition. When the boot problem was fixed, I used gParted to extend my C: partition and delete useless recovery partitons at the end of the drive. So actual partitioning is as follow [as per Diskpart]:
Partition ### Type                Size         Offset
Partition 1         Recovery         500 MB   1024 KB
Partition 2         System            300 MB    501 MB
Partition 3         Reserved         128 MB    801 MB
Partition 4         Primary            930 GB    929 MB
So I guess I made something wrong when I tried to repair the UEFI boot partition... Well, now it boots correctly, but I can't enable BitLocker anymore and get the not-so-explicit "The system cannot find the file specified" error you had. Here is
what I get with a "bcdedit.exe /enum ALL":
Firmware Boot Manager
identifier              {fwbootmgr}
displayorder            {bootmgr}
                        {d10304b6-5db7-11e4-bf1c-806e6f6e6963
                        {d10304b1-5db7-11e4-bf1c-806e6f6e6963
                        {d10304b2-5db7-11e4-bf1c-806e6f6e6963
                        {d10304b4-5db7-11e4-bf1c-806e6f6e6963
                        {d10304b3-5db7-11e4-bf1c-806e6f6e6963
                        {d10304b5-5db7-11e4-bf1c-806e6f6e6963
timeout                 0
Windows Boot Manager
identifier              {bootmgr}
device                  partition=\Device\HarddiskVolume2
path                    \EFI\Microsoft\Boot\bootmgfw.efi
description             Windows Boot Manager
locale                  en-gb
inherit                 {globalsettings}
default                 {current}
resumeobject            {4496c237-5dd0-11e4-be46-f1ba631dfb0b
displayorder            {current}
toolsdisplayorder       {memdiag}
timeout                 30
Firmware Application (101fffff)
identifier              {d10304ae-5db7-11e4-bf1c-806e6f6e6963
description             Setup
Firmware Application (101fffff)
identifier              {d10304af-5db7-11e4-bf1c-806e6f6e6963
description             Boot Menu
Firmware Application (101fffff)
identifier              {d10304b0-5db7-11e4-bf1c-806e6f6e6963
description             Recovery
Firmware Application (101fffff)
identifier              {d10304b1-5db7-11e4-bf1c-806e6f6e6963
description             SATA HDD:
Firmware Application (101fffff)
identifier              {d10304b2-5db7-11e4-bf1c-806e6f6e6963
description             USB CD:
Firmware Application (101fffff)
identifier              {d10304b3-5db7-11e4-bf1c-806e6f6e6963
description             USB FDD:
Firmware Application (101fffff)
identifier              {d10304b4-5db7-11e4-bf1c-806e6f6e6963
description             USB HDD:
Firmware Application (101fffff)
identifier              {d10304b5-5db7-11e4-bf1c-806e6f6e6963
description             NETWORK:
Firmware Application (101fffff)
identifier              {d10304b6-5db7-11e4-bf1c-806e6f6e6963
device                  partition=\Device\HarddiskVolume2
path                    \EFI\Microsoft\Boot\bootmgfw.efi
description             Windows Boot Manager
Windows Boot Loader
identifier              {current}
device                  partition=C:
path                    \Windows\system32\winload.efi
description             Windows 8.1
locale                  en-gb
inherit                 {bootloadersettings}
isolatedcontext         Yes
allowedinmemorysettings 0x15000075
osdevice                partition=C:
systemroot              \Windows
resumeobject            {4496c237-5dd0-11e4-be46-f1ba631dfb0b
nx                      OptIn
bootmenupolicy          Standard
detecthal               Yes
Resume from Hibernate
identifier              {4496c237-5dd0-11e4-be46-f1ba631dfb0b
device                  partition=C:
path                    \Windows\system32\winresume.efi
description             Windows Resume Application
locale                  en-gb
inherit                 {resumeloadersettings}
isolatedcontext         Yes
allowedinmemorysettings 0x15000075
filedevice              partition=C:
filepath                \hiberfil.sys
bootmenupolicy          Standard
debugoptionenabled      No
Windows Memory Tester
identifier              {memdiag}
device                  partition=\Device\HarddiskVolume2
path                    \EFI\Microsoft\Boot\memtest.efi
description             Windows Memory Diagnostic
locale                  en-gb
inherit                 {globalsettings}
badmemoryaccess         Yes
EMS Settings
identifier              {emssettings}
bootems                 No
Debugger Settings
identifier              {dbgsettings}
debugtype               Serial
debugport               1
baudrate                115200
RAM Defects
identifier              {badmemory}
badmemorylist           0x10007
Global Settings
identifier              {globalsettings}
inherit                 {dbgsettings}
                        {emssettings}
                        {badmemory}
Boot Loader Settings
identifier              {bootloadersettings}
inherit                 {globalsettings}
                        {hypervisorsettings}
Hypervisor Settings
identifier              {hypervisorsettings}
hypervisordebugtype     Serial
hypervisordebugport     1
hypervisorbaudrate      115200
Resume Loader Settings
identifier              {resumeloadersettings}
inherit                 {globalsettings}
I also enabled Fast Bios and ACHI Mode in my BIOS [along with enabling Secure Boot on UEFI mode], as well as tried to clear TPM and reinitialize it, but that didn't change anything. And thanks to your posts I had a look to C:\Windows\System32\Recovery\ReAgent.xml
but it does not seem to be populated with the any GUIDs:
<?xml version='1.0' encoding='utf-8'?>
<WindowsRE version="2.0">
<WinreBCD id="{24b2af92-fddf-11e1-bfa1-001377e67dbe}"/>
<WinreLocation path="\Recovery\WindowsRE" id="0" offset="254619418624" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}"/>
<ImageLocation path="" id="0" offset="0" guid="{00000000-0000-0000-0000-000000000000}"/>
<PBRImageLocation path="" id="0" offset="0" guid="{00000000-0000-0000-0000-000000000000}" index="0"/>
<PBRCustomImageLocation path="" id="0" offset="0" guid="{00000000-0000-0000-0000-000000000000}" index="0"/>
<InstallState state="1"/>
<OsInstallAvailable state="0"/>
<CustomImageAvailable state="0"/>
<IsAutoRepairOn state="1"/>
<WinREStaged state="0"/>
<OperationParam path=""/>
<OsBuildVersion path="9600.16384.amd64fre.winblue_rtm.130821-1623"/>
<OemTool state="0"/>
<IsServer state="0"/>
<DownlevelWinreLocation path="\Recovery\WindowsRE" id="0" offset="1048576" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}"/>
<IsWimBoot state="0"/>
<ScheduledOperation state="5"/>
</WindowsRE>
Nevertheless I have a ReAgent_Merged.xml1 file in that same folder, which contains:
<?xml version='1.0' encoding='utf-8'?>
<WindowsRE version="1.0">
    <WinreBCD id="{24b2af8c-fddf-11e1-bfa1-001377e67dbe}"/>
    <WinreLocation path="\Recovery\WindowsRE" id="0" offset="1048576" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}"/>
    <ImageLocation path="\recovery\WindowsRE" id="0" offset="1048576" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}"/>
    <OsInstallLocation path="\RecoveryImage" id="0" offset="231720616448" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}" index="1"/>
    <CustomImageLocation path="" id="0" offset="0" guid="{00000000-0000-0000-0000-000000000000}" index="0"/>
    <InstallState state="1"/>
    <OsInstallAvailable state="1"/>
    <CustomImageAvailable state="0"/>
    <IsAutoRepairOn state="1"/>
    <WinREStaged state="0"/>
    <OperationParam path=""/>
    <OsBuildVersion path="9200.16384.amd64fre.win8_rtm.120725-1247"/>
    <OemTool state="0"/>
    <BootKey state="0"/>
    <IsServer state="0"/>
    <ScheduledOperation state="4"/>
</WindowsRE>
So I'm stuck, and any pointer would be greatly appreciated. :-/
Cheers,
Kwansetsu

(ID 2033 Details: The system cannot find the path specified (0x80070003))

Hello,
We are running DPM 2010 RTM
On a few protected members we get the following error.
Type: Tape backup
Status: Failed
Description: DPM encountered an error while performing an operation for c:\users\(username)\favorites\ on SRV-BCK01.domain.com (ID 2033 Details: The system cannot find the path specified (0x80070003))
More information
End time: 9-7-2010 4:19:40
Start time: 9-7-2010 4:18:24
Time elapsed: 00:01:15
Data transferred: 0 MB
Cluster node -
Source details: wsl-150.domain.com\User data
Protection group: Clients
Library: IBM TotalStorage 3573 Tape Library
I looked up the replica destination on the Protection tab and if I browse to this location I also get an error that the path cannot be found.
We can recreate the replica path be removing the protected member and its replica points and the add the member again, but what is causing this issue and/or how can I prevent this.

Hello:
I may have a solution or explanation for what you have encountered.
We started getting this exact error today for all tape backup jobs.
"RA cannot read from/write to temp area. (ID 30107 Details: The system cannot find the path specified (0x80070003))"
I located another reference telling me DPM on the DPM server needed a folder called TEMP under the main DPM path,
"Program Files\Microsoft DMP\DPM", and that this folder should be shared out with full permissions granted to the local SYSTEM account on the DMP server. The folder was already there but I went to the trouble of sharing it out, granting full permissions
to local SYSTEM.
That action did not improve the situation.
I did know that a member of our team trying to recover space on the almost full C drive on our DPM server yesterday had been deleting a lot of files. On a hunch I went into the DPM RECOVERY tab and drilled down into the TEMP folder on the DPM server backup
of itself. It was quite full of files and then I noticed a folder called MTA inside it. I manually recreated this folder, leaving it empty. Taking that action appears to have solved the problem as I have been able to run two tape backups now.
So the folder I manually created while logged in as administrator was "c:\program files\Microsoft DPM\DPM\Temp\MTA".
It would not appear to be good practise to create critical subfolders in a folder called TEMP which are not automatically recreated if needed.
So, consider this information and see if it applies to your situation.
Good Luck.
Herb Peters (Network Team at Vancouver School Board)

LV Applicatio​n Builder: solving "The system cannot find the file specified.​" error?

Similar Messages

Maybe you are looking for

LV Application Builder: solving "The system cannot find the file specified." error?