LV crashed. VI locked up and won't open!

Hi there,
I have been crunching for hours in LV6.1. NI changed the AI Read so that it dumped out a waveform, vs. an array. Since I was having difficulties working with the waveform, I pasted in an older 'AI Read' subVI that had an array output.
The program would crash the odd time, but not enough to cause a headache. And then the big one came. LV crashed! This time I couldn't even open up the VI. I double-clicked on it, and eventually it went looking for itself. When I navigated to the proper location, it didn't recognize the VI! What do I do? I have hours of 'inspired' programming in there. Has anybody seen this type of behaviour? I am desperate and tearing out my hair. Luckily I have some to spare...
I have attached
the VI (if you can open it!). Thank you in advance for your help.
Regards
Babu S. Rahman
Attachments:
fdb_fh_oldAI.vi ‏251 KB

The AI read is a polymorphic vi. You can change its properties so that it outputs a standard array, just like in older versions. Perhaps using the LV 6 AI Read w/ a different output type will alleviate some hair loss.
Check out:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/bb88081be07d874a862569830004588a?OpenDocument
2006 Ultimate LabVIEW G-eek.

Similar Messages

  • Aperture Locks Up and Won't Open Selected Library

    I recently did some housekeeping on my system drive..... now Aperture does not connect to the managed library or vault. The library is on a separate drive and shows 40 gigs.
    I have done the following:
    1. Re-Installed Aperture and set the Library location in preferences.... all I get is the spinning wheel.
    2. Started Aperture holding down the option key and pointed to the library or vault..... all I get is the spinning wheel.
    I obviously messed up something when I did my housekeeping, but I thought re-installing the program would fix that issue. I've searched through the posts and forums and can't find a similar problem. Any ideas? I'm stuck!
    Thanks!

    You should try to rebuild your library. There is a way to force Aperture to rebuild the library on startup through a key sequence which I do not remember. I know I had to do this once when I was in a similar situation as you.
    Here is a link that talks about how to do it
    http://aperturetricks.wordpress.com/2006/07/10/aperture-trick-54-library-rebuild /

  • ITunes crashes, other apps hang and won't open

    When I click on iTunes, it either ignores me or it'll open first and then hang permanently so the rest of the system functions but I can't use iTunes.
    Don't know whether it's linked but I'm also struggling to open the Trash basket and Finder.
    Tried reinstalling iTunes - no joy.
    I have a 13-inch mid-2009 MacBook running MacOSX Lion 10.7.2.
    Any help appreciated!
    thanks,
    Paul

    Do you have any devices connected to your computer such as printers, webcams, etc?
    Try removing them if you do. I've seen some cases of this and sometimes unplugging these devices will work.
    I'd also suggest running MSconfig to ensure that there's no conflicting software. You can get all that information here: http://support.apple.com/kb/HT2292
    Another suggestion would be trying to create a test user (Admin privileges would be necessary). If it's able to install in that user account, you know it's something with the user. But if the installation is successful, it should install system wide.
    I would recommend trying this article: http://support.apple.com/kb/HT1926
    Good luck.

  • Ipod stuck in lock mode and won't connect to Windows computer

    My Ipod is stuck on the lock position and won't connect to my computer when I plug it in. The hold switch moves back and forth just fine and it was working perfectly yesterday. It's the classic nano that's square. It's stuck on a song that I used as my alarm yesterday morning. I haven't turned it on since then and when I pushed the on switch, it went to the screen but then wouldn't do anything else. I've tried to hold down the menu and middle button while moving the hold switch, but it didn't work. Please help!

    I fixed it! I had to switch the hold button from on to off to on again and then held the menu and middle button down at the same time. It works just fine now!

  • HT1495 When I try to open iTunes on my PC it it's locked and won't open?

    When I try to open iTunes on my PC it it's locked and won't open?

    Hey itunesilliterate1,
    Thanks for the question. I understand you are experiencing issues launching iTunes on your Windows computer. The following resource may provide a solution:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    If you are on a Windows XP system, and receive a “Disk is locked” error when opening iTunes, see this article:
    iTunes for Windows XP: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
    http://support.apple.com/kb/HT1866
    Thanks,
    Matt M.

  • What do I do when my iphone three is locked up and won't even hard reboot?

    What do I do when my iphone 3gs is locked up and won't even hard reboot?

    To hard reboot your iPhone 3GS hold both the sleep/wake and the home button at the same time and it should shut down, wait a few seconds before shutting it back on. Also you can hook your iPhone up to itunes and under the iPhone screen select restore to bring the phone back to a clean state. That may help in cutting down on how much it freezes, but make sure you back it up before you do do this if you wish. That way you can restore your old data.
    Hope that helps. ^_^

  • Motion 5 crash and won't open projects

    Was working on a project when Motion crashed.  Now that project won't open.  I started a new project and it did the same thing. When starting, Motion does ask about restoring windows when booting. Happens on another computer as well.  Any help?

    Be sure you have the latest updates to Motion, the OS, and all your other apps via Software Update and the App Store.
    Run Disk Utility to "repair" all hard drives.
    Be sure all hard drives have at least 15% of the total capacity as free space.
    Get the free "Preference Manager" app from Digital Rebellion (dot com) to trash Motion pref files properly an safely.
    At worst, get the free "Final Cut Remover" app from Digital Rebellion to totally uninstall Motion, re-boot, then re-install from the App store.

  • I have an older Power Mac G5 running 10.4 11.  When I open Keychain it is locked and won't open on restart or when I use my administrator password

    I have an older Power Mac G5 running 10.4 11.  Key chain seems to have locked itself ?  When I go to open Keychain it is locked and won't open on restart or when I use my administrator password.  I thought the keychain password was the administrator's password and that it would open on restart.  If this isn't correct, how can I open Keychain ?

    Click here and follow the instructions.
    (63958)

  • IOS7 on iPad mini. Now my keyboard locks up and won't type. Any ideas or help?

    IOS7 on iPad mini and now keyboard locks up and won't type. Any help here?

    thanks for the reply, brian, but unfortunately that is what i meant by the hard reboot.  i've done that many, many times and it's still stuck.  nothing is helping and i can't even get it to sync to iTunes to restore it.
    thanks anyway!

  • HT1349 Successfully loaded ios7 to iphone 4S from iTunes...now iphone asks me to agree to terms and privacy, then it locks up and won't accept my "agree." Goes in a loop and can't get past this screen.  Pls help.  thanks.

    successfully loaded ios7 to iphone 4s.
    now iphone asks me to agree to terms and privacy, then it locks up and won't accept my "agree."
    goes in a loop and can't get past this screen.  Pls help.  thanks.

    Have you tried resetting the device?
    Hold down the home and lock buttons until you see an Apple Logo, then release the buttons.
    If that doesn't work, you should check to see if you have a backup because you may have to restore your device.

  • Links to web page in any mail message will cause Mail app to hang, and won't open Safari.

    Repeatable problem on iPhone or iPad.
    Any link to a web page will cause Mail to lock up and become unresponsive, and won't open the web page in Safari.
    The only way out of this is to back out to the home screen, double-click on the home button, then select the Mail app icon, holding it until I can "close" it. I can then relaunch Mail and look at any message I want just like normal.  But if select any link, whether a text link or a picture in an email, the whole thing happens again.
    Occurs on both my iPhone 5 and my iPad both running iOS 6.0.1.
    Any suggestions that will allow me to go directly from a mail msg to a linked web page embedded within?

    You ran a defective third-party "utility" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system and many applications.   
    The first thing you need to do is remove that software according to the developer's instructions. Never install it, or anything like it, again. Then see below.
    If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.
    *The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

  • My iPhoto keeps quitting unexpectedly and won't open. I don't know what to do. Please help!

    My iPhoto keeps quitting unexpectedly and won't open. I don't know what to do. Please help!

    Do you get a crash report?  If so post just the first 50 lines of it.
    OT

  • After data file recovery, files are red and won't open

    My HD crashed so I used Data Rescue 3 to recover my files. It worked but now all the files are highlighted red and won't open. The file sizes look right but for instance when I try to open a mov file it says, this is not a movie file. My FCP projects won't open either. Does anybody know what the problem is and what I need to do to get the files usable again?

    Data recovery can be hit and miss. Data Rescue is unlikely to be able to recover every single byte from every single file. If so much as a single byte is out of place, QuickTime will be unable to read the file.
    I would suggest you give QT Repair a try and if that doesn't work, try File Salvage:
    http://www.digitalrebellion.com/fcs_maintenance.htm
    (standard disclaimer: I may receive compensation, financial or otherwise, from my recommendation)

  • My recovered files are red and won't open

    My Toshiba external hard drive broke and a friend used a program on his mac to recover the files. He says it worked but now all the files are highlighted red and won't open. The file sizes look right, but for instance when I try to open a .mov file it says, this is not a movie file. Does anybody know what the problem is and what I need to do to get the files usable again?

    Thanks, Courcoul. I did Get Info and changed all the permissions to Read & Write for Me, Fetching, and Everyone. Still doesn't work. But, if I click on the picture of the Lock to Unlock it, I can't do that, because it's a work computer and they don't give me admin privileges. So maybe that's the problem? Though I don't see why. I use to be able to open all the files on my computer.

  • After upgrade to mavericks: time machine keeps asking for my back up disk and won't open unless i plug in the disk. any solutions?

    after upgrade to mavericks: time machine keeps asking for my back up disk and won't open unless i plug in the disk. any solutions?
    before the upgrade, i could open time machine without the need for having the back up disk plugged in.

    Ok. I got it to work, sort of....
    As I mentioned before I tried the "disk password" and the "Time capsule Password" options to see if I can start the back up again or start a new backup. Neither worked. So I tried the firmware down grade, but like you said that did not work. I then decided to try the "Account password" option and I have never used this option before becasue it states that if there is data on the drive it would not be acessable after creating an account. Since I wiped out the disk that was nno problem. When I created the new account and choose the drive it asked for the user name and password. I entered the info for the new account I just created(FYI this has nothing to do with your login username and password), bingo! It worked!
    Now I have two partitions on the TC disk. The old one and now the new account. I am guessing this is to be used if I have multiple computers, which I don't.
    I any case, I am going to wipe out everything again and try again to do a backup the way I had it before.

Maybe you are looking for