LV-SignalExpress2011 - Cannot save to .LVM - Option is disabled in the Step Setup

Hello, for some reason I cannot choose the option to save as .LVM in my SAVE TO ASCII/LVM step.
The input signal is a DBL Data output from a LabView 2011 Plugin. The data plots fine on the Data Graph... I can only save as ASCII.TXT. I want to save as .LVM because I want to include a time-stamp for every sample.
Attached is a screenshot of the step setup for the FILE EXPORT TYPE - You'll see the pull-down is gray'ed out...
Any ideas why this is disabled?

You should post to the express board. However, I can tell you that since a dbl array has no time stamp information, it does not matter that you can't select lvm.

Similar Messages

I've noticed that in the new version of Firefox that you cannot save multiple tabs at one time like the previous Firefox 3.6.or so and I wanted to know if I can find that feature again?

I've noticed that in the new version of Firefox that you cannot save multiple tabs at one time like the previous Firefox 3.6.or so and I wanted to know if I can find that feature again?
In the previous versions of Firefox when you went to you Bookmarks menu it gave you the options to either Bookmark This Page 'command' + 'D', Subscribe to this Page, Bookmark All Tabs 'up-arrow-key' + 'command' + 'D', and Organize Bookmarks 'up-arrow-key' + 'command' + 'B' however in the newest version of Firefox there is no Bookmark All Tabs so you can bookmark all the tabs that you have up in one window at a time. So I need to know if it is possible that the feature is now in a different place, is gone altogether, or if you can get that feature another way?
For me personally and my work I go through hundreds of web pages a day and save around half of those so it is imperative that I be able to bookmark more then one tab at a time because I can't be bothered to bookmark every single page separately and then go through hundreds of tabs in my Unsorted bookmarks in order to sort those bookmarks. It is simple inconvenient to sort every bookmark individually that is why the previous version of Firefox with the Bookmark All Tabs button was superior in its convenience.

Right click any tab and choose "Bookmark All Tabs".

Attempting to download a wmv file. I keep getting the message: "You cannot save this document with extension ".wmv" at the end of the name. The required extension is ".webarchive" --if I save it this way, i just get a web address rather than the wmv

Attempting to download a wmv file. I keep getting the message: "You cannot save this document with extension “.wmv” at the end of the name. The required extension is “.webarchive” --if I save it this way, i just get a web address rather than the wmv

Find the URL for the WMV, paste it into Safari's address bar, and press the Option and Enter keys.
(66873)

HT1420 i am trying to authorize my new computer. i cannot find any menu option for this in the Itunes store.

I am trying to authorize my new computer for Itunes. I cannot find any menu option for this in the computer store

Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

Why cant I rotate and save a picture from iphone 4s in windows photo viewer windows 7? the error is cannot save because there is a problem with the photo properties. I can rotate and save screenshots

why cant i rotate and save a picture from iphone 4s in windows photo viewer windows 7? the error is cannot save because there is a problem with the photo properties. I can rotate and save screenshots

Windows do not repect the digital EXIF specification. Use a free viewer http://www.irfanview.net/ for Windows.

TS1538 Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows.

Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows. However, the driver "Microsoft teredo Tunneling adapter" has a yellow exclamation mark, which i believe means it's not installed correctly or something is wrong with it. This driver is under the Network Adapters (Please see picture below).
This is what happens when I connect my iPhone 4s to my laptop (Windows 7 Starter 32-bit)
1. The phone charges it's battery
2. I can open it in My Computer and import/export media files.
In iTunes
3. It start to sync until step 3 then stops.
4. The iPhone option with an arrow appears beside the iTunes Store, but when the arrow is clicked it disappears.
I hope you can provide me a solution for this problem.
Thanks,
Ralph

Hi ralphagir,
Welcome to the Apple Support Communities!
For your iTunes issue with it not recognizing your iPhone, I would go ahead and suggest deleting iTunes and all of its components from your Windows computer and installing fresh.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
As far as the arrow button that you click and the iPhone disappears, it sounds like you may be clicking on the eject button. Please take a look at the following article for information on the eject button in iTunes.
Safely disconnect iPod
http://support.apple.com/kb/HT1853
Have a great day,
Joe

I cannot save a frame from a video following the recent Apple recall to replace my hard drive. There is no menu option with share and save frame. Do I need to reinstall Final Cut Pro?

Since the recent replacement of my hard drive, I cannot save a frame from a video. There is no menu option with share and "save frame" I used to be able to do this.
Please help

In the Share popup select Add Destionation to go to the Destination preference. Drag still image to the sidebar to make it available in the popup.

Workflow options are disabled in the sidekick for non-administrators

We have a custom workflow for content approval. The first step in the workflow assigns the task to the workflow initiator.
While testing the workflow, the initiation is successful and also the first task is assigned to the initiator. But when the initiator open the task and the content attached to the workflow opens in the content finder the workflow options are not available in the sidekick. It just says "
This page is subject to workflow:
TxDOT Content Approval Workflow
Under Workflow Package it says - "Unable to add to a package because of a running workflow."
Any idea why the workflow options to complete, step back, and delegate are not available? These options are available to the author by right-clicking on the task in the Inbox. Just not available in the sidekick.

Sham,
This is the strange part of the issue. The content is attached to the workflow and the task is also assigned to the user. I have verified this from the worklfow instances. Yet, these options are not available in the sidekick. However, these options are available in the right-click menu in Inbox.

Since installing os8 I cannot find my 3G option for connecting to the Internet when wifi is not available. Where do I find the 3G option?

Since installing os8 I cannot find the 3G option in my settings. Where did it go?

IIn recent versions of the iOS it is now called just Cellular. It's in the Settings app.

Cannot save beans in a session OR use the same beans in multiple pages

Hi all I use these code to my jsp file to create a session and store a bean.
Unfortunately, the session cannot store the beans so that I can use them in the next page.What did I omit? Regardless the session scope, can I use request scope beans and with jsp:forward use them in multiple page? (I have tried it but it doesn't work).
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@page session="true"%>
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
<%
String nextPage = request.getParameter("np");
if(nextPage.equalsIgnoreCase("checkDate")){
%>
<jsp:useBean id="checkDate" scope="request" class="essex.kkarad.beans.checkDateBean" />
<jsp:setProperty name="checkDate" property="*"/>
<%
    checkDate.validate();
%>
<jsp:forward page="Availability.jsp"></jsp:forward>
<%
} else if(nextPage.equalsIgnoreCase("checkRooms")) {
%>
<jsp:useBean id="checkRooms" scope="request" class="essex.kkarad.beans.checkRoomsBean" />
<jsp:setProperty name="checkRooms" property="*"/>
<%
   if(!checkRooms.validate()){
%>
<jsp:forward page="Availability.jsp"></jsp:forward>
<%
%>
<%
%>

You should also be encoding the URL so that you don't have to worry about loosing the session if the user has cookies turned off:
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@page session="true"%>
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
<%
String nextPage = request.getParameter("np");
String availabilityPage = response.encodeURL("Availability.jsp");
if(nextPage.equalsIgnoreCase("checkDate")){
%>
<jsp:useBean id="checkDate" scope="session" class="essex.kkarad.beans.checkDateBean" />
<jsp:setProperty name="checkDate" property="*"/>
<%
    checkDate.validate();
%>
<jsp:forward page="<%=availabilityPage%>"></jsp:forward>
<%
} else if(nextPage.equalsIgnoreCase("checkRooms")) {
%>
<jsp:useBean id="checkRooms" scope="session" class="essex.kkarad.beans.checkRoomsBean" />
<jsp:setProperty name="checkRooms" property="*"/>
<%
   if(!checkRooms.validate()){
%>
<jsp:forward page="<%=availabilityPage%>"></jsp:forward>
<%
%>
<%
%>

I purchased IPod touch for grandson and he has screwed up his ICloud and cannot remember email or password used to do the original setup. Now receiving message that no more ICloud accounts are available for this unit. Is there a way to work through this?

Grandson and friend just reset system several times and now neither can remember which email account or password was used to set up the ICloud account. I try to set up the account for him again and receive the message that no more accounts are available. I cannot reset because just like them, I don't know what they used. Surely, there must be some way to wipe out their settings and start fresh again?

Just connect to itunes and restore the ipod, when the restore is complete set it as a new ipod. Your problem must be resolved.

Hello i have pc with Vista ..cannot view i tunes anymore pls tell me the steps to disinstall and the link to install it .. there is an erro that comes out thank you

hello i have a pc with windows and i tunes disappeared with all my music.. i d like to know step by step to disinstall and install pls send the correct link ciao tks

Hi lauretta1960,
Welcome to the Support Communities!
The article below may be able to help you with this.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
I hope this information helps ....
Have a great day!
- Judy

Cannot enter 'incoming mail server' for iCloud in the accounts setup

How can I enter information in the 'incoming mail server' blank in the iCloud accounts setup when it will not highlight?

i have the same problem

Cannot save as PDF - "Could not save a copy as (filename) because the file is already in use..."

I have a number of PSD files I've created and I'm trying to save them as PDFs.
I can Save for Web and Devices, I can save as a .gif, .eps., and every other format I've tested, but I cannot save as a PDF. I get the error:
"Could not save a copy as (filename) because the file is already in use or was left open by another application."
I'm running Adobe Master Collection CS5 with Photoshop CS 5.5 (12.0.4 x64) on a Windows 7 64-bit machine.
I have a 928 GB HD with 697 GB free.
I have rebooted and tried saving the files immediately after I reboot. I have killed my virus scanner. I have killed a number of other possible culprits including Acrotray.exe and CS5ServiceManager.ext
I have run Process Explorer as recommended by Microsoft and found no applications using the file. I've also tried saving the file to my external hard drive and/or renaming the file with only rare luck.
Nothing seems to fix it.
The boards seem to suggest Adobe isn't taking responsibility for this and pointing it back to the OS or other software. I'm willing to believe them if someone can show me how/where to kill whatever process it is - but at this point, all my indicators point back to Photoshop.

Here is a clip from a past post where user could not drag and drop files to hard drive.
To my great relief I have now sorted this issue and offer the following as the Correct Answer. My sincere and grateful thanks go to Curt and Yammer, above, who have helped me so much in sorting this Windows 7 issue which is clearly very relevant to Bridge users also. Any slowness to grasp what they have been saying is down to me!
The key to solving this issue lies is understanding that in terms of Windows 7 Security, every internal or external hard drive, plus folders, sub-folders and files thereon has an OWNER. Also each OWNER has a certain level of PERMISSION to do things such as moving files to a different folder, deleting or re-naming them etc. If you try to do things that you don't currently have Permission to do, that is when you get an ‘Access Denied’ error message. Also your system has an Admistrator or Administrators and at the outset you need to ensure through the Control Panel that you are listed as one of them. .
If, like me, you didn't realise these things, (and why would you if Microsoft or your computer or hard drive suppliers couldn't be bothered to really make sure you knew about them), then trying to fathom the ‘Access Denied’ problem becomes a stressful and frustrating nightmare as I can testify having spent a week at it!
The steps that I took to resolve the issue and which I believe now constitute the 'Correct Answer' are as follows:
First make sure that you have Administrator rights on your system via the Control Panel
Next ‘right click’ on the Drive whose files you want to gain full access to, for example the drive that your pictures are stored on, and click on 'Properties'.
Under the Security tab you will see a list of Groups and Users on this drive and the Permissions that they have to do things.
Before doing anything to edit these Permissions, first click on the Advanced button. This opens another window with a tab showing the Owner of this drive.
Click on the Owner tab and if you are not already listed as the owner, make yourself the owner by selecting your name from the list. I believe it should appear there if you are an admistrator or user. (In my case at this stage the owner was initially shown as an obscure string of numbers and letters which I believe identified the drive when it was connected to the lap top I was using before I upgraded my machine)
Now be sure to check the box that says "Replace Owner on Subcontainers and Objects" and the click Apply. On completion of this step, the drive in question and all the folders, subfolders and files thereon should now be 'owned' by you. You could check this out by right clicking on a particular folder then clicking Properties > Security > Advanced > Owner. Your name should appear. So far so simples!
Now go back to the Security Tab for your drive (Step 2 / 3 above) and look at the Permissions you currently have. Your aim now is to allow yourself 'Full Control.' If you don’t currently have this level of permission click Edit, select your name on the list, check ‘Full Control’ and 'Apply' the change.
I think I'm right in saying that at this point whilst still working in the Drive directory you are now given the option of ticking boxes which allow you to, in effect, cascade the permission you have just granted yourself to all the files and folders on that drive. Tick the box to allow this and Windows should then take care of the rest.If I'm not quite correct here then in my particular case, for example, all my images were stored on my external drive. The top level, or 'parent' folder in which all my pictures could be found was the 'My Pictures' folder and I had created a number of folders and subfolders ('child ' folders) within that folder. The permissions I gave to the Parent folder – My Pictures – were cascaded down through the Child folders.
On completion of the above step I tested the result in Windows Explorer by dragging a few files back and forth between folders and it now worked perfectly - I was now able to move / delete / rename etc all files without now getting the dreaded access denied message. What a sense of relief! This meant that I could now open Bridge normally rather than having to right click it and 'Run As Admistrator' - albeit that is a very useful thing to do until you get the problem sorted as described.

Cannot save free/busy information - Cached mode

So I have a calendar Admin, that has the ability to send meetings on behalf of new hires. She was is cached mode and sent out a few invites. Everyone she sent the invites to received the meetings, accepted the meetings and have the meetings on
their calendar. My Calendar Admin see's the meetings on the new hire's calendar, but no one else can see these meetings on the new hires calendar. My Calendar Admin mentioned seeing the infamous pop-up "cannot save free/busy information":
I disabled cache mode on my Calendar Admin's Outlook 2013, once I disabled cached mode and close/re-opened Outlook, all the the invites she had sent for the users were gone, no longer listed on the "Organizers" calendar... so somehow the invites
were only saved locally to her cached calendar. This smells like a pretty bad bug for users with access to shared calendars and seems like they MUST be in NON-CACHED mode when sending any invites on behalf of someone else. So now, all the meetings
are on all the calendars of the "invitees" but not on the new hire (organizers) calendar. This is seems to be a reproduceable bug that I'm hoping isn't working "as designed"
Are there any known bugs with this process? Is there a way around this other than disabling cached mode? Where do these meetings actually save when in Cached mode on a shared calendar?
Thanks in advanced

Hi,
Please check this following setting on her account first.
In Outlook, click File, click Account Settings, and then click Account Settings (again).
Select the Microsoft Exchange account, and then click Change.
Click More Settings.
Click the Advanced tab.
Select the Download Shared Folders option.
Click OK, click Next, click Finish, and then click Close in the Account Settings window.
If this doesn’t work, please try to repair or re-create outlook profile to check this issue.
Exit Outlook.
In Control Panel, double-click Mail.
Click Show Profiles.
Select a profile.
Click Remove.
Click Add to create a new Profile.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

LV-SignalExpress2011 - Cannot save to .LVM - Option is disabled in the Step Setup

Similar Messages

Maybe you are looking for