LW 16/600 Fails POST when Connected to Network

I have an Apple LaserWriter 16/600 that I bought in 1992. When I power it up, it goes through the POST OK but if it's connected to the network, the leftmost light flashes instead of turning solid green.
When I disconnect the network adapter (I'm using a Farallon EtherWave), the leftmost light stays solid green.
I have powered the printer off and back on, including leaving it off for about a week.
Anyone have any insight on this.
Also, anyone know of a company that repairs the 16/600?
Thanks for any info.

After the Power-On Self Test, the green light flashing indicates that it is accepting a print job. Most folks would not consider that a malfunction.

Similar Messages

HT1595 My apple tv stuck at setting date and time. Also when connecting yo network doesn't ask for network password

My apple tv stuck at setting date and time. Also when connecting yo network doesn't ask for network password

I just went through this last night. (Aug 15, 2013)
What I did to get back up and running. This is not the first time I have lost the network connection with my Apple TV 3
Products effected: Apple TV 3 and Home Sharing (My Apple TV 1 was not effected)
Power down (unplug) the Apple TV and power down your router ( in my case, it is a FIOS router, flipping the on/off works fine).
Power both items back up.
At this point, I usually can reenter my Apple ID and PW. and reconnect Home Sharing. But for some reason I was unable to reconnect last night but was able to get it reconnected in the morning. I was jut to tired to deal with it last night.
A new issue that is was able to fix after a good nights sleep.
I did figure out, (after trying to reenter my ID and PW many times and having it tell me that my ID and PW was wrong), that when using the Apple TV on screen keypad to type in the user ID. DO NOT use the ".com" keypad button. Instead type out each character for .com. ( or what ever ending you use for your ID account.)
Once I typed out my full ID and PW. everything is back to 100%

"logon failed" error when connecting to XML data source

I have an HTTP source that generates XML. I have a schema that describes this XML. If I save the XML to a local file it works fine as a data source with the schema. However, when I try to access the same data via HTTP, I get the following error:
Logon failed.
Details: Cannot open file
Server returned HTTP response code: 401 for URL: http://localhost:8004/report.xqy?Validate%20XML=0&Use%20WS-Security%20Config%20File=&WS-Security%20File%20Location
However, if I enter that URL in a browser it works fine. And even if I disable security on the HTTP source, it produces the same error.
I have tried a local HTTP source as well as the same source running on Amazon EC2.
Any ideas?

Thanks for the help.
I am new to crystal reports, so I do not understand your suggestion. Both of those points look like they are related to Adobe Flash.
I am trying to create a report using the standard report creation wizard:
1) new, standard report
2) create new connection
3) xml and web services
4) xml data source
When using the sample from the SAP site, it works fine:
http://resources.businessobjects.com/support/downloads/samples/cr/customer_db/customer.xml
When connecting to my source from a browser, it works fine. When using my source as a local document instead of over http it works fine. It is only when connecting to my source over http that I get the failed logon error.
Kelly

MS Access connectivity gets slow when connecting insidde network domain

Hello,<o:p></o:p>
We've created an application based on Excel VBA that connects to an access DB located at the file server in our network domain. Now I'm installing
same app in another server for another domain, but the connection is really slow so the app hangs while retrieving information from the .mdb file located at the server.<o:p></o:p>
I created a local environment in my computer to test and realized as as soon as I connect the network cable the connection to the DB get slow, but
when I unplug the network cable the app start to responding as usual.<o:p></o:p>
I'm using Ole DB jet 4.0 with the following connection string:<o:p></o:p>
cnt.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source= MasterDB ;Jet OLEDB:Database Password= 12345;"<o:p></o:p>
It seems that the problem it is related to some authentication on the server that makes the connectivity slow because it has not sense to me that
when I connect the network cable and log into the domain the speed goes down even if the application is looking to the DB file in mi local hard drive.<o:p></o:p>

I'd try them over here.
Office
Access forums on Microsoft Answers
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Macbook shuts down when connected to network

My Macbook Pro continues to shut down and restart itself - ONLY when connected to a new network wirelessly. It works fine at our office, but when I take it home or to another network, it starts the shut down/restart

Hi Residae,
I understand you are having issues when connecting your iPod to iTunes. Lets see if the iPod Troubleshooting Assistant resolves this:
iPod Troubleshooting Assistant
Reset
To reset your iPod:
1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
Tip:
If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
If the above does not help, please try the remaining 4 steps.
Thanks,
Matt M.

ASSERT failed error when connect room closed?

Anyone more that have experienced this error message when closing a meeting room - and have a solution?

As a copy of this query has been posted to the CR design forum at 11:21, assuming this is indeed a design question.
Thus setting this thread as answered.
- Ludek

On iPad with iOS 8.0.2 I am experiencing photos are missing on Home page of some Facebook posts when connecting to Facebook via Safari

I have noted that I am not able to view some photos of some Facebook posts on my Home page when I try to view on my iPad (iOS 8.0.2) via Safari. On some occasions I can refresh the page and some of the photos become visible, others remain the large white box with the tiny blue question mark in the center of the box. Anyone else out there with this problem? Thanx.

Your iPhone's iOS must be same or newer than the one in backups. In your case it is older so you need to update your iPhone and then recover it with backup.

Cisco NAC Server eth0 fails communication when connected to trunking switchport

NAC deployment is L2 OOB Virtual-Gateway-Mode
When our CAS eth0 is connected to a trunk port, the port will chage to a connected state but we are unable to ping the CAS from the CAM or from switch connected to the CAS. Our CAM is on vlan 32 and the cas is on VLAN 60. Below is the config for the port connecting the CAS. The CAS managment ip is assigned to vlan 60.The switch is a 6509. Blade 2 only supports dot1q so we do not need to set encapsolation type for this switchport.
interface GigabitEthernet2/39
description Trust eth0
no ip address
switchport
switchport trunk native vlan 998
switchport trunk allowed vlan 33,34,40,60
switchport mode trunk
end
If we disable trunking and switch the port to access vlan 60 we are able to communicate with the CAS. Has anyone ran in to this when deploying NAC?
If so, how was the issue resolved?

I have the same issue. But it gets even stranger; I had the CAM/CAS working in a test LAN enviroment, got the AD SSO to work by appllying VLANs based on AD group membership of the user logging on. Client was pleased.
Move the two NAC devices to their location and reloaded clean both CAM & CAS from CD, did the same configuration and now eth0 (Trusted) can't see the AD domain controller but can see the CAM. I ran nslookup on the CAS to test the network settings and the result is no server found - the DNS server is the AD domain controller.

Slower internet connection when connection wireless network

Currently using a Linksys WRT54GL wireless broadband (firmware v4.30.5) router in conjunction with a Thomson Speedtouch 546i ADSL router (ISP provided).
My problem is that when I connect to the internet over the wireless network I experience a much slower internet connection in comparison with when I use a tp-cable.
Tested with various online "speed-tests" (I know they are not to be trusted, but they do give a basis for comparison):
Over wireless network : ca.6000kbits/sec.
Direct cable from pc to router (tested on both routers):12-13000kbits/sec.
Hope anyone has any idea what the problem may be, and any help is greatly appreciated.

Change the beacon to 50 ....and reduce the RTS and the fragmentation by 40 each.....these options are found under the advanced wireless settings...
Also make sure that u have the latest drivers installed for the Wireless NIC.

Slow boot when connected to network

Hi
I have a macbook pro and an imac, both recently updated and have noticed that since the update there is a significant delay, right at the start of the boot process, if either machine is connected to a network. Both my machines are running boot camp with windows 7.
On both machines, if I hold the "ALT" key to select a disk when powering on and the machine is connected to my network (which uses static IP addresses), there is a delay of a minute or so before the boot disks are displayed. If they are not connected then the disks are displayed almost immediately.
My question then: What's going on? The IP addresses are static so what could they possibly be waiting for?
Cheers
Mark

Hi,
How about Safe Mode? Have you tried it? In addition, please try to upgrade your BIOS and motherboard driver to be latest for test.
Be warned: Flashing BIOS is a risky process. If power is interrupted during the update your machine will be rendered unusable.
Roger Lu
TechNet Community Support

ITunes freezes with iPhone, when connected to network

iTunes started to freeze with latest version (9), when iPhone is connected.
I tryed everything from the Apple support page:
http://support.apple.com/kb/ts1421
The last sentence on that page is "Disconnect your computer from the Internet"
iTunes is working well with iPhone, when network is disabled, but how I can fix it? What could be the problem?

Hey Hoods ginest,
Check out the following article, it'll go over how to sync your photos to your iPhone using iTunes:
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/ht4236
You'll want to read the section titled "Syncing photos to devices" and then "To sync photos from a folder on your hard disk to your device."
Take care,
David

BC4J, compiling: takes ages to compile when connected to network

Hi,
We have a BC4J project that's almost
100% wizard-generated from an Oracle 8.1.5
database and we have been experiencing a very strange behaviour in JDev. What happens is that it takes ages to load and compile the project when the computer is connected to the network. Just unplugging the network cable more than doubles the speed. The database and JDev are on the same machine: a Pentium III 550, 512MB using JDK1.2.2.
We would appreciate any comments on this behaviour.

athelas wrote:No, I removed it since and I removed eth0="dhcp" and wlan0="dhcp", because that is in the profiles. Yes I am still experimenting with all that stuff but I didn't know which deamons can be backgrounded and which not.
This is off the actual thread topic, but I background everything except syslog-ng because I do want to see logs in case something goes wrong during boot. Also you have hal in your daemons which is deprecated. If you still use apps that require hal, then by all means keep it in the array, but if you don't then that's something you can get rid off.
fam is another that can be replaced with gamin. gamin does not require to be run as a daemon. if you don't use printers then you can get rid of cups. if you don't have network storage or any reason to access drives across the network then you can remove netfs as well.
Just some things you can look into.
Last edited by Inxsible (2010-08-09 14:49:58)

Computer Name changes at Terminal prompt when connected to network

When I connect to the network at my client my terminal prompt changes from:
MyComputer:~ john$
to:
companynetwork:~ john$
I don't log in to their network, I just connect to LAN and get an IP address assigned by DHCP.
What gives?
Disclaimer: I'm a recent convert from MS so you'll have to explain things to me as if I was a 5 year old.
Thanks!
Message was edited by: Hardbap

found an explanation here:
http://forums.macosxhints.com/archive/index.php/t-70445.html

MDNS responder hogging CPU when connected to network

Hi all.
It seems whenever I'm connected to my work's network (either via wired or wireless) my mDNSResponder service starts hogging CPU. It generally starts at 0 and works its way up to 70-80% total CPU usage. I can kill it but within a few seconds it starts back up again.
Any idea what the problem is or how to fix it? This has never been a problem in the past, and as far as I'm aware there have been no changes to the network.
Thanks!

My first psychic guess would be a messed up .cache, but...
mDNSResponder (also known as mdnsd on some systems) is a daemon invoked at boot time to implement Multicast DNS and DNS Service Discovery.
mDNSResponder listens UDP port 5353 for Multicast DNS Query packets.
When it receives a query for which it knows an answer, mDNSResponder issues the appropriate Multicast DNS Reply packet.
mDNSResponder also performs Multicast DNS Queries on behalf of client processes, and maintains a cache of the replies.
mDNSResponder has no user-specifiable command-line argument, and users should not run mDNSResponder manually.
To examine mDNSResponder's internal state, for debugging and disagnostic purposes, send it a SIGINFO signal, and it will then dump a snapshot summary of its internal state to /var/log/system.log, e.g.
sudo killall -INFO mDNSResponder
Also, not sure if this applies to OSX or not...
http://www.linuxmanpages.com/man8/mDNSResponder.8.php

Dramatically increased response times when connected to network

I suddenly noticed that the response time for opening a folder item in my local Portal installation increased when I connected to the network. Why? I want to understand this, since I'm supposed to help a customer with their performance problems.
Further details:
The response time increased from about 2 seconds to about 10 seconds when I connected to the network. In this case, I connected via an ISDN line to my normal dial-up number at work. However, when I connect to my private ISP account (Telenor Online), the response times are unchanged, i.e. still 2 seconds.
One difference between the two access points is the use of a proxy in the first case.
What's the explanation?
Thanks, Erik Hagen
null

Hi,
To your issue, the following blogs would be helpful:
Outlook Performance Troubleshooting including Office 365
How To Troubleshoot Microsoft Exchange Server Latency or Connection
Issues
Thanks,
Jessie

LW 16/600 Fails POST when Connected to Network

Similar Messages

Maybe you are looking for