LWAP management with a tool like HPOV

Hello,
This is my first post on the Support Community
We are deploying a new wireless infrastructure with a WCS (7.0.172.0) / WLC (7.0.116.0) and AP AIR-LAP1142N-E-K9
This AP are in lightweight mode.
I know that we cannot do a SNMP polling directly on the AP.
For the moment we monitor the AP's only by the traps sent by the WLC.
My question is : Is it possible to poll continuously the AP's status (up/down) maybe through the WLC or the WCS ? if yes how we can do that ?
The goal is to monitor all the network with only one tool (HPOV) and the AP's integrated on our supervision map.
any help will be gratefull
David K.

Is it possible to poll continuously the AP's status (up/down) maybe through the WLC or the WCS ? if yes how we can do that ?
You poll the SNMP values of the WAP via the WLS and yes, we've done it.
You can have a myriad of options. You can be pedantic and poll how many radios are up/down and compare the amount of WAPs.
We've done the same but you will need someone who can do scripting as well as SNMP.
The goal is to monitor all the network with only one tool (HPOV) and the AP's integrated on our supervision map.
Not sure if HPOV can do this but we just use a simple HTML server. It's as simple as that.

Similar Messages

Is there a translator for garageband-output-data to numerical data? available, to postprocess these data with mathematical tools like Fourier decomposition?

Is there a translator for garageband-output-data available to numerical data to postprocess these data with mathematical tools like Fourier decomposition.

I'm not sure I understand what you want to do - but if you want to analyze the composite audio signal, just share the GB project to an audio file on your hard disk and keep working on the resulting AIFF.

How Documaker Studio 12.0 - compares with other tools - like HP EXSTREAM

Hello Experts !
I am trying to find a comparison document between latest versions of Documaker Studio 12.0 & HP Exstream.
I had worked on Documaker 10.2 for several past years, but has been working on HP exstream in Recent years.
I am trying to understand what has changed in Documaker 10.2 to Documaker Studio, so that I can work on Studio - mostly for batch Application. I have gone through most of the Docs for Documaker Studio, & understand the BASE product which works on the back ground RUN TIME process has not changed a lot for batch processing at least. I understand that GUI is totally different, with various additional features for versioning, check out, checkin etc.
Also I am trying to compare DOcumaker Studio with HP Exstream, with which I have now about 4 years recent experience..
If any of you have any comparison docs, request to forward to me. ( [email protected]). Also I encourage if any of you Documaker studio experts can talk to me - I can explain the features of Exstream & we can have an interesting discussion - my number is (302) 312 3120..
Thanks in advance !

Thank you Gaetan, I appreciate your response. One last question.
Pretend I have a ParagraphList with 4 paragraph choices. In two of those paragraph choices, I need each of them to have another 2 paragraph choices EACH.
So I know that you can't insert more MLT fields in paragraphs. Because of this, I don't think I'll be able to use PSL's and PAR's if I have multi level selections. Can anyone verify that this is correct? or am I missing something?
Since I will need a table selection for multiple sections, and those sections needs to be able to call additional tables for for more sections, I'm thinking TERSUB is probably my best bet. This could go on for three or so levels.
Any inputs? thanks.

How do I disable Firefox's Download functionality, I would like to use another download manager with Firefox...many thanks Bruce

Hi I am using version 3.6.15 with Windows 7, I would like to use another download program in place of Firefox's default option, how can I disable this in Firefox
Many thanks
Bruce Baxter

Use this extension to integrate an external download manager with Firefox. <br />
https://addons.mozilla.org/firefox/220/<br />
http://www.flashgot.net/whats

In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like brush etc). I can't figure out how to disable.

In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like brush etc). Whenever I try to use a tool, a blue box appears around the line and I have to double click it to manipulate it, which opens just that line in a semi burred screen where all the other objects are semi-grey in the background. I can manipulate this line in this screen but nothing else at that time which I could do about 5 minutes ago. For exampe, I no longer can join up 2 lines drawn by the line tool together. For some reason this started randomly (probably due to a accidental shortcut combination) and I just can't put it back to what it used to be. I have inserted a video hopefully showing what I mean. Any help would be appreciated.

Thank you - Just what I needed

After I upgraded my Mac with Yosemite, Photoshop Elements 12 stops responding when you use editing tools like eraser, clone stamp.

After I upgraded my Mac with Yosemite, Photoshop Elements 12 Editor stops responding when you use some tools like eraser, clone stamp.

This should help. Photoshop Elements doesn't respond when you use editing tools in Mac OS X 10.10
~ Arpit

How manage to get my apple TV2 working with a nas like buffalo live with iTunes server?

i will probably buy a buffalo nas.
does this solution work with my atv2 as a mass storage?
can i stream films from the nas to my hdtv via teh atv2?
how manage to get my apple TV2 working with a nas like buffalo...
best regards,
yves

Yalgee wrote:
ATV2 should browse shared iTunes libraries in the same network.
Problem started when ATV only supports Apple home sharing.
I agree it would be nice if it worked with these NAS based iTunes servers but it doesn't, so if that's a necessity you would be better off looking at a media player from someone else and not purchasing DRM protected incompatible content from iTunes.
AppleTv 1 did not use home sharing and it didn't work with NAS itunes either.
We really need an Apple branded NAS that could home share, either that or they need to license the technology to 3rd parties, but frankly I can't see either happening.
Running a computer 24/7 is not ideal and one area where AppleTV1 was better in that you could store content on it's internal drive.
AC

Tracking User Activity with Standard Web Logs and Tools Like WebTrends

We are running EP 6 SP14 on UNIX and I'm looking to track user activity. Not just how many people have logged in, but who is accessing what documents in KM. For example, what documents are the most popular and how much use the system is getting.
I was hoping that EP 6 (Unix platform) ran off us some standard web engine (like Apache) and we could just turn web logs on, but from the lack of discussion on SDN, I'm not encouraged.
All I've seen is unofficial link to a Portal Activity Report, which would get us part of the way, but is not full web reporting.
Portal Activity Report:
https://www.sdn.sap.com/irj/sdn?id=/library/uuid/0101b690-0201-0010-6584-a02730ad5edd
Does anyone have any insight on this?

HI llise
Did you get any answers? We are in the same quandry as the exisitng tracking reports are not sufficient for our needs as our users are used to using more sophisticated tools like livestat.

Version Management with Analysis workbooks? Doesn't save workbooks in BW Netweaver platform or BO Platform

SAP BusinessObjects Analysis, Edition for Microsoft Office - 1.4 SP6
SAP BusinessObjects BI Platform - 4.1 SP2
BW 7.3
SAP Logon pad - 7300.1.0.1074
We are trying to implement What-if analysis in Analysis Office tool like Revenue increase by N percentages. Excel formula applied for this in the adjacent column to keyfigures that is coming from BEx Query.
Here, I need to save the Workbooks in versions as V1, V2, V3, etc., for various percentages.
When I try to save this in BO platform, only the version V1 (first copy) is getting saved. But, the modified workbook is not getting saved with different name as V2 or V3, etc.,
When I try to save this Netweaver platform, even the first copy V1 is not getting saved. But it displays different versions in the save window before closing the Analysis Office application.
Please provide information on VERSION MANAGEMENT with Analysis Office.
Note: I see a difference in 'Open' and 'Save' window that is Roles are not visible in the 'Open Workbook' window but Roles are visible in 'Save Workbook' window.
Thanks,
Jeni.

SAP BusinessObjects Analysis, Edition for Microsoft Office - 1.4 SP6
SAP BusinessObjects BI Platform - 4.1 SP2
BW 7.3
SAP Logon pad - 7300.1.0.1074
We are trying to implement What-if analysis in Analysis Office tool like Revenue increase by N percentages. Excel formula applied for this in the adjacent column to keyfigures that is coming from BEx Query.
Here, I need to save the Workbooks in versions as V1, V2, V3, etc., for various percentages.
When I try to save this in BO platform, only the version V1 (first copy) is getting saved. But, the modified workbook is not getting saved with different name as V2 or V3, etc.,
When I try to save this Netweaver platform, even the first copy V1 is not getting saved. But it displays different versions in the save window before closing the Analysis Office application.
Please provide information on VERSION MANAGEMENT with Analysis Office.
Note: I see a difference in 'Open' and 'Save' window that is Roles are not visible in the 'Open Workbook' window but Roles are visible in 'Save Workbook' window.
Thanks,
Jeni.

SQL IN clause with a Tool variable

We are using using Forte 3.M.2 (just upgraded from 3.G, finally).
Platform is AIX 4.3. Database is DB2 (UDB) (version 5.2 i think).
True, I haven't tried my code on any other platform. I think it should work on NT, because one of our other teams members has set up an NT laptop for portable demos. And it has DB2 (NT version i guess) loaded on it.
Dynamic sql is not really that bad, if you have to go that route to build your list.
Let me know how it goes.
Steven Barnes
Daniel González de Lucas <danieleam.es> 07/28/00 04:06AM >>>We are getinng some trouble, the DB Manager seems to try to convert
:OfficeList to a unique integer lets say:
:OfficeList value is 3,4,7
so the IN clause
trying with Oracle 8.1.5 converts 3,4,7 in a unique integer (a extrange
value because doesn't match with 3,4 nor 7).
trying with SQL Server 6.5 gives an error converting 3,4,7 to a unique
tinyint.
The idea is that with your sintax the DB Manager must split the TextData
into 3 integer values. I think that it works fine in some DB Managers and
not in others.
Which release and vendor of DB Manager you use?
Which Forté release?
Thank you very much in advance.
Daniel.
----- Original Message -----
From: "Steve Barnes" <DHS9126dhs.state.il.us>
To: <danieleam.es>; <kamranaminyahoo.com>
Sent: Thursday, July 27, 2000 1:55 PM
Subject: Re: (forte-users) SQL IN clause with a Tool variable
I needed to have an "IN" clause for some numbers. Here's how I did it:
GetOffices():TextData method...
Offices : TextData = new ;
for (x : integer) in sql select MyIntegerColumn
from MY_TABLE
where whatever condition
on session MyDBSession do
Offices.Concat(x) ;
Offices.Concat(',') ;
end for ;
return (Offices.CopyRange(0,Offices.ActualSize -1)) ; // get rid of lastcomma
in actual sql.....
OfficeList : TextData ;
OfficeList = GetOffices() ;
sql select * from MyTable where MyField in (:OfficeList)
on session MyDBSession ;
Works very well.
Steven Barnes
Daniel González de Lucas <danieleam.es> 07/27/00 05:32AM >>>Hello,
To do a select we have two options:
select * from MyTable
where MyField in ('a','b','c')
we would like to do the same but using a forté variable in the IN clause.
select * from MyTable
where MyField in (:ToolVar)
What should we do and what kind of variable or array of variables shouldwe use in ToolVar to do the same than in first option?
>
Has anybody done this without a dynamic query?
Best regards
Daniel
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Error Using Connection Manager with InfoSwing

Hi,
Im trying to connect to an Oracle 8.0.5 DB through the
Connection Manager. I succeed in connecting with tools like SQL+
and Toad but not with my applet.
The dosbox says:
oracle.jbo.rt.cs.CSException
oracle.jbo.rt.GenericDataException: JBO-100: A generic exception
occurred during Data access
Exception: java.sql.SqlException:Refused:
at oracle.jbo.rt.cs.local.JBOSessionFactoryImpl.create<Compiled
Code>
at oracle.jbo.rt.cs.local.JBOSessionFactoryImpl.create<Compiled
Code>
at oracle.jbo.rt.cs.local.JBOSessionFactoryImpl.create<Compiled
Code>
at oracle.jbo.rt.cs.JBOSessionFactory.create<Compiled Code>
at oracle.jbo.rt.cs.JBOSessionFactory.create<Compiled Code>
at oracle.dafc.dataset.SessionInfo.connect<Compiled Code>
at oracle.dafc.dataset.SessionInfo.open<Compiled Code>
at oracle.dafc.dataset.SessionInfo.publishSession<Compiled Code>
at package4.Applet1.jbInit<Compiled Code>
at package4.Applet1.init<Compiled Code>
at sun.applet.Appletpanel.run<Compiled Code>
at java.lang.Thread.run<Compiled Code>
...and my java-source look like
theConnectString = "@(DESCRIPTION =(ADDRESS_LIST ="+
"(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.122)(PORT =
1610))"+
"(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.122)(PORT =
1521)))"+
"(CONNECT_DATA = (SID = ORCL))(SOURCE_ROUTE = YES))";
sessionInfo1.setConnection(new SessInfoDescriptor
("scott","tiger",SessionInfo.THIN,theConnectString));
Anyone a suggestion to make it work. My goal is to bypass the
applet-security.
Thanks in advance!
null

Hans,
There are two issues here:
1. Connecting to the db from JDeveloper (the correct driver?)
2. Connecting to the db from an Applet
In order to narrow down the problem domain, try connecting from
the InfoBus Wizard using the correct dirver (for driver info see
posting on March 22 titled "JDeveloper can't connect to Oracle")
Hope this helps.
Regards,
Hans Duijn (guest) wrote:
: Hi,
: Im trying to connect to an Oracle 8.0.5 DB through the
: Connection Manager. I succeed in connecting with tools like
SQL+
: and Toad but not with my applet.
: The dosbox says:
: oracle.jbo.rt.cs.CSException
: oracle.jbo.rt.GenericDataException: JBO-100: A generic
exception
: occurred during Data access
: Exception: java.sql.SqlException:Refused:
: at oracle.jbo.rt.cs.local.JBOSessionFactoryImpl.create<Compiled
: Code>
: at oracle.jbo.rt.cs.local.JBOSessionFactoryImpl.create<Compiled
: Code>
: at oracle.jbo.rt.cs.local.JBOSessionFactoryImpl.create<Compiled
: Code>
: at oracle.jbo.rt.cs.JBOSessionFactory.create<Compiled Code>
: at oracle.jbo.rt.cs.JBOSessionFactory.create<Compiled Code>
: at oracle.dafc.dataset.SessionInfo.connect<Compiled Code>
: at oracle.dafc.dataset.SessionInfo.open<Compiled Code>
: at oracle.dafc.dataset.SessionInfo.publishSession<Compiled
Code>
: at package4.Applet1.jbInit<Compiled Code>
: at package4.Applet1.init<Compiled Code>
: at sun.applet.Appletpanel.run<Compiled Code>
: at java.lang.Thread.run<Compiled Code>
: ...and my java-source look like
: theConnectString = "@(DESCRIPTION =(ADDRESS_LIST ="+
: "(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.122)(PORT =
: 1610))"+
: "(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.122)(PORT =
: 1521)))"+
: "(CONNECT_DATA = (SID = ORCL))(SOURCE_ROUTE = YES))";
: sessionInfo1.setConnection(new SessInfoDescriptor
: ("scott","tiger",SessionInfo.THIN,theConnectString));
: Anyone a suggestion to make it work. My goal is to bypass the
: applet-security.
: Thanks in advance!
null

Windows 7 - Possible to adjust fan speed UP with "official" tool?

I just got a new T500 with the switchable graphics option, and windows 7 Pro x64 installed.
When playing a game like TF2(i.e. maxing out the ATI discrete card), the system gets fairly hot - Not critically, but the rear-left corner of the system gets hot enough to be annoying against my leg.
As such, I'm looking for a way to increase the fan speed at higher temps - when I'm gaming, I don't really care about noise; I either have loud sounds happening or headphones.
Is there any more-or-less official solution to do what I want, or do I have to resort to an unofficial tool like [url=http://www.thinkwiki.org/wiki/How_to_control_fan_speed#For_Windows]This[/url] one?
Thanks,
-Robbie

so you are using the laptop on your leg? there is no official tool as such for setting the fan speed at certain level, as it is regulated by the computer thermal management circuitry as needed.
However, i highly suggest you try to use a laptop cooler, and don't use the laptop on your leg when playing games, as prolonged usage could cause first degree burn to your skin. This is why some laptops are called notebook and carries a warning against using the laptop on your lap.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Difference between XML Publisher and Other tools like Aventx

Hi,
Please bear with my newbie question. From all the XMLP documentation that I have read, it seems like XMLP is the tool that I would need to distribute my ERP information either through print/fax/email etc. However, I have also been hearing about tools like Aventx which is a layer above XMLP and helps in delivering documents through fax/email etc.
What basically is the difference between XMLP and these other tools? Can I not just have XMLP sitting on top of my ERP and have my documents delivered without investing in these other 3rd party tools?
Thanks,
itzmey

Hi Itzmey
THe short answer is yes you could avoid the 3rd parties but, there is always a but. XMLP with extract the data, format the data and generate the ouput all completely integrated with the rest of the Apps techstack. However for the delivery you are going to have to write some custom code to get the documents out of the system i.e. we have not integrated the delivery of docs with the conc manager yet ... no I dont have a timeline at the moment. I wrote a series of articles on the blog about delivering from EBS http://blogs.oracle.com/xmlpublisher. Its not that tough but its a custom solution.
AventX and others fill that gap we have admirably. Yes, its a thrid party solution but its a very well thought out and integrated solution that they will support you on, etc.
So its up to you, custom or third party.
Regards, Tim

Flow management with portals

Hi all,
I work with flow control in the WLPS and have some problem.
I am able to invoke unportalized JSP from a pipelet but cann't manage to
return back to the portal home page.
To invoke an unportalized JSP I use the following sequense in the
webflow.properties:
agentsMgr.jsp.link(agentNew)=portals/myPortal/agentNew.jsp
where agentsMgr.jsp is a portlet and agentNew.jsp is a particular JSP.
Now I would like to return back to the portal home page.
I tried to use the following code:
in JSP:
WebflowJSPHelper.createWebflowURL(pageContext,"agentsNew.jsp","link(portalHome)",true)
in webflow.properties: *
.jsp.link(portalHome)=portals/myPortal/portal.jsp
and got an exception.
I changed approach and used
in JSP:
WebflowJSPHelper.createWebflowURL(pageContext,"agentsNew.jsp","link(portalHome)","&portalized=true&dest="+getHomePage(request),
true)
in webflow.properties: nothing
and the result was the same.
I noticed that getHomePage(request) always retrives null although I have
used <%@ page extends="com.beasys.commerce.portal.admin.PortalJspBase"%>
Any pointers about using flow management with portals would be greatly
appreciated.
Alex

Are you trying to build an interaction system within OBIEE? If that is the case, then OBI might not be an ideal tool as it is a Business Intelligence reporting tool.

My drive recently had to be replaced with a new one installed by Apple they reinstalled all my stuff from my time machine. Most my programs had to be updated which I managed with a little help from my friends, but the last one that I can't solve is

My IMAC OSX 10.6.8 2.8 GHz intelcore 2Duo 4GB 800 Mhz DDR2 SDRam recently had to have its hard drive replaced by apple thy actually had to give me a larger one because mine was no longer available,They also reinstalled all my programs and data from my 2 terrabite time machine back up. I got my system home and found that I had to upgrade most of my programs which I managed with a little help from my friends, but I still have one problem that I can't solve I have a Nikon Coolpix S6 that I have Been Syncing with my Iphoto since I've got it 3 years ago and now when I place it in the cradle the program reconizes it and says that it is going to start to import the new photos the little white wheel in the center of the screen starts spinning but nothing else happens. I checked all my connections and they are goog plus I even downloaded a nikon progam just to double check the camera & cradle and it works there but it wont pair off with my IPhoto.

First go to iPhoto Preferences, look in both General and Advanced tabs to make sure that things are set to import from camera into iPhoto.
Then if that doesn't help, connect the camera and open Image Capture in your Applications > Utilities folder and see if you can use Image Capture to reset the import path from the camera to iPhoto.
Image Capture: Free import tool on Mac OS X - Macgasm
Message was edited by: den.thed
Sorry John, I didn't see your post when I clicked the reply button. Dennis

LWAP management with a tool like HPOV

Similar Messages

Maybe you are looking for