LWAP migration of AIR-1131AG-A failed bad mzip file

Hello Experts,
I would like to connect a Cisco LWAP 1131AG-A-K9 with a WLC4402 running on 4.1.171.0
Unfortunately, the software downloaded from the WLC is not correctly unpacked on the AP.
I can see an error on the console stating "bad mzip file".
We did several test with converting back to autonomous and migrating to LWAP again using the Cisco Upgrade Tool
but we are failing constantly, even though the Cisco Upgrade Tool states a successful update.
All our european Cisco LWAPs 1131AG-E-K9 are running fine by the way on the controller.
I have added the Console messages to show the error to You.
Who knows anything about that ?
Please support.
*Mar  1 00:00:08.865: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.4(21a)JA2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Mon 02-Nov-09 18:17 by prod_rel_team
*Mar  1 00:00:08.892: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar  1 00:00:09.389: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source
*Mar  1 00:00:09.839: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar  1 00:00:18.494: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 163.157.68.121, mask 255.255.255.0, host
name AP001e.7abd.cf52
Translating "CISCO-CAPWAP-CONTROLLER.corp.skf.net"...domain server (163.157.156.161)
Translating "CISCO-LWAPP-CONTROLLER.corp.skf.net"...domain server (163.157.156.161) [OK]
*Mar  1 00:00:38.814: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Mar  1 00:00:38.816: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER.corp.skf.net
*Mar  1 00:00:48.819: %CAPWAP-3-ERRORLOG: Go join a lwapp controller
*Mar  1 00:00:48.819: %LWAPP-3-CLIENTERRORLOG: Set Transport AddressCalled
examining image...
extracting info (286 bytes)
Image info:
    Version Suffix: k9w8-.124-3g.JA
    Image Name: c1130-k9w8-mx.124-3g.JA
    Version Directory: c1130-k9w8-mx.124-3g.JA
    Ios Image Size: 3410432
    Total Image Size: 3410432
    Image Feature: WIRELESS LAN|LWAPP
    Image Family: C1130
    Wireless Switch Management Version: 4.1.171.0
Extracting files...
c1130-k9w8-mx.124-3g.JA/ (directory) 0 (bytes)
extracting c1130-k9w8-mx.124-3g.JA/info (286 bytes)
extracting c1130-k9w8-mx.124-3g.JA/6701.img (131328 bytes)
*Mar  1 00:00:48.831: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN
*Dec  9 12:37:21.242: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE
extracting c1130-k9w8-mx.124-3g.JA/c1130-k9w8-mx.124-3g.JA (3138988 bytes)
extracting c1130-k9w8-mx.124-3g.JA/7101.img (13132
*Dec  9 12:38:19.147: %SYS-4-PUPDATECLOCK: Periodic Clock update with ROMMON failed, because size left in ROMMON (4294967295), size
needed (29), error code (-1)
*Dec  9 12:38:19.148: %SYS-5-RELOAD: Reload requested by lwapp image download proc. Reload Reason: NEW IMAGE DOWNLOAD.
*Dec  9 12:38:19.148: %LWAPP-5-CHANGED: CAPWAP changed state to DOWN8 bytes)
extracting info.ver (286 bytes)
New software image installed in flash:/c1130-k9w8-mx.124-3g.JA
Configuring system to use new image...done.
archive download: takes 58 seconds
Writing out the event log to nvram...
Xmodem file system is available.
flashfs[0]: 11 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6035968
flashfs[0]: Bytes available: 9963008
flashfs[0]: flashfs fsck took 30 seconds.
Base ethernet MAC Address: 00:1e:7a:bd:cf:52
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
Loading "flash:/c1130-k9w8-mx.124-3g.JA/c1130-k9w8-mx.124-3g.JA"...#################################################################
###################################################################################################################################b
ad mzip file, unknown zip method
Error loading "flash:/c1130-k9w8-mx.124-3g.JA/c1130-k9w8-mx.124-3g.JA"
Interrupt within 5 seconds to abort boot process.
Loading "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"...###############################################################################
File "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000
executing...

We are using right now only Lightweight-APs with ETSI-Standards on several Controllers without having that problem.
The problem appears during the migration from AUutonomous to Lightweight of an 1131AP with American-Standard.
The according WLC is configured to support US-Country of course.
I cannot believe that this is the problem.  This would mean different LWAPP-images per regulation domain.
Who knows more about this damned mzip-error during the extracting phase of the LWAPP-image ?

Similar Messages

  • Magic number mismatch: bad mzip file in 3750 stack switch

    Hi All can anybody help me in this error msg
    "magic number mismatch: bad mzip file"
    I am trying to upgrade the switch  with"c3750e-ipbasek9-tar.122-55.SE5.tar" in 3750 stack switch it is  showing this error msg while booting
    thanks in advance

    Hi,
    The reason you are getting this error message on the switch is a corrupt or wrong IOS image "c3750e-ipbasek9-tar.122-55.SE5.tar".
    If the switch is in rommon mode, and you have any other image in the switch, boot it using that image. Once the switch is up, download and copy the correct IOS image once again on the switch and try to upgrade.
    If you need help in finding the correct IOS image, give me the exact switch model number, i will help you with that.
    But forsure the image is wrong or corrupt and that is why you are getting this error.
    Thanks
    Ankur
    "Please rate the post if found useful"

  • Certificate migration and AIR runtime versions

    Hi,
    I recently migrated my AIR app from a self-signed certificate to TrustCenter real certificate. I used migrate AIR application in Aptana AIR SDK in order to make updates smooth. When I tested it using runtime 1.5 I was able to use built-in autoupdate just fine, application with TC certificate installed as an update. After migrating to AIR 2, when I try to install a new version on top of the old one I get a message 'There is already an application with the same name'. I'd like to keep the migration for as long as I can, to make sure everyone can smoothly update.
    Thanks for your help,
    Karol Kowalski

    Hi,
    This discussion thread might help you:
    http://forums.adobe.com/message/2899850#2899850
    In AIR 1.5, Publisher id was generated automatically from the certificate. However, from AIR 1.5.3 onwards, publisher id has been removed. So, to update apps having namespace 1.5 to apps having namespace >=1.5.3, you need to add a separate tag <publisherID> in your application.xml containing the publisherid for the older app.
    Otherwise, it would be treated as a different application. More info can be found on:
    http://www.adobe.com/support/documentation/en/air/1_5_3/releasenotes_developers.html#newfe at

  • Packaging on FB 4.7 - AIR 3.7 fails

    While packaging my app for debuggin on device, it compiles fine for a bunch of times, then suddently I get:
    'Launching application-device' has encountered a problem. Error packaging the application:
    Error:  application.xml is not a valid AIRI or AIR file.
    Recreating the project didn't help. Looking on Google, I found a post that mention that this error can come up when the period is missing after the app.xml filename in the adt command. Is this a bug? What's the workaround?
    thanx
    Vv

    I'm packaging with Flash Builder 4.7, overlayed with AIR 3.7:
    Debug command
    launch method On Device, Fast, Debug via USB,
    including only the required files in the package (xml and swf)
    Thsi is the full error log:
    Error occurred while packaging the application:
    File D:\subversion\common\branches2\SutekTombMobile\bin-debug\AOT\SuteksTomb-app.xml is not a valid AIRI or AIR file
    usage:
      adt -checkstore SIGNING_OPTIONS
      adt -certificate -cn <name> ( -ou <org-unit> )? ( -o <org-name> )? ( -c <country> )? ( -validityPeriod <years> )? ( 1024-RSA | 2048-RSA ) <pfx-file> <password>
      adt -help
      adt -migrate SIGNING_OPTIONS ( <air-file-in> | <airn-file-in> ) <output-file>
      adt -package SIGNING_OPTIONS ( -target air )? <output-package> ( <app-desc> FILE_OPTIONS | <input-package> )
      adt -package SIGNING_OPTIONS -target airn <output-package> ( <app-desc> FILE-AND-PATH-OPTIONS | <input-package> )
      adt -package -target ( apk | apk-debug | apk-emulator | apk-captive-runtime ) ( CONNECT_OPTIONS? | LISTEN_OPTIONS? ) ( -airDownloadURL <url> )? SIGNING_OPTIONS <output-package> ( <app-desc> PLATFORM-SDK-OPTION? FILE-AND-PATH-OPTIONS | <input-package> PLATFORM-SDK-OPTION? )
      adt -package -target ( ipa-test | ipa-debug | ipa-app-store | ipa-ad-hoc | ipa-test-interpreter | ipa-debug-interpreter | ipa-test-interpreter-simulator | ipa-debug-interpreter-simulator ) ( CONNECT_OPTIONS? | LISTEN_OPTIONS? ) ( -sampler )? ANE_LINK_OPTIONS? SIGNING_OPTIONS <output-package> ( <app-desc> PLATFORM-SDK-OPTION? FILE-AND-PATH-OPTIONS | <input-package> PLATFORM-SDK-OPTION? )
      adt -package SIGNING_OPTIONS? -target native SIGNING_OPTIONS? <output-package> ( <app-desc> FILE-AND-PATH-OPTIONS | <input-package> )
      adt -package SIGNING_OPTIONS? -migrate SIGNING_OPTIONS -target native SIGNING_OPTIONS? <output-package> <app-desc> FILE_OPTIONS PATH-OPTION
      adt -package SIGNING_OPTIONS? -target bundle SIGNING_OPTIONS? <output-package> ( <app-desc> FILE-AND-PATH-OPTIONS | <input-package> )
      adt -package SIGNING_OPTIONS? -target ane <output-package> <ext-desc> ANE_OPTIONS
      adt -prepare <airi-file> <app-desc> FILE_AND_PATH_OPTIONS
      adt -sign SIGNING_OPTIONS ( -target ( air | airn | ane ) )? ( <airi-file> | <unsigned-ane-file> ) <output-file>
      adt -devices          PLATFORM-OPTION PLATFORM-SDK-OPTION?
      adt -installRuntime   PLATFORM-OPTION PLATFORM-SDK-OPTION? DEVICE-OPTION? ( -package <apk-file> )?
      adt -installApp       PLATFORM-OPTION PLATFORM-SDK-OPTION? DEVICE-OPTION? -package <apk-file | ipa-file>
      adt -uninstallRuntime PLATFORM-OPTION PLATFORM-SDK-OPTION? DEVICE-OPTION?
      adt -uninstallApp     PLATFORM-OPTION PLATFORM-SDK-OPTION? DEVICE-OPTION? -appid <app-id>
      adt -launchApp        { PLATFORM-OPTION PLATFORM-SDK-OPTION? DEVICE-OPTION? ( -debuggerPort port )? -appid <app-id> }
      adt -runtimeVersion   PLATFORM-OPTION PLATFORM-SDK-OPTION? DEVICE-OPTION?
      adt -appVersion       PLATFORM-OPTION PLATFORM-SDK-OPTION? DEVICE-OPTION? -appid <app-id>
      adt -version
    SIGNING_OPTIONS      : -storetype <type> ( -keystore <store> )? ( -storepass <pass> )? ( -alias <aliasName> )? ( -keypass <pass> )? ( -providerName <name> )? ( -tsa <url> )? ( -provisioning-profile <profile> )?
    FILE_OPTIONS         : <fileOrDir>* ( ( -C <dir> <fileOrDir>+ ) | ( -e <file> <path> ) )*
    CONNECT_OPTIONS      : -connect <host>
    LISTEN_OPTIONS       : -listen <port>
    ANE_LINK_OPTIONS     : -hideAneLibSymbols ( yes | no )
    ANE_OPTIONS          : -swc <swc> ( -platform <name> (-platformoptions <file>)? <fileOrDir>* ( -C <dir> <fileOrDir>+ )* )*
    FILE-AND-PATH-OPTIONS: ( PATH-OPTION | FILE-OPTIONS ) FILE-AND-PATH-OPTIONS?
    PATH-OPTION          : -extdir <dir>
    PLATFORM-OPTION      : -platform (android | ios)
    PLATFORM-SDK-OPTION  : -platformsdk <platform-sdk-home-dir>
    DEVICE-OPTION        : -device ( deviceID | ios-simulator )

  • AIR Runtime Upgrade Fails on Windows

    Hi there,
    I've a customer trying to use an Adobe AIR application which I develop and they're running into some difficulty when it comes to upgrading the application. Here's the setup:
    1. User has 3.2 version of Eye-Fi Center AIR application installed on their machine. Version 3.2 of Eye-Fi Center requires AIR 2.0. User has AIR 2.0 runtime running on their machine.
    2. User tries to upgrade to 3.3 version of Eye-Fi Center AIR application. Version 3.3 of Eye-Fi Center requires AIR 2.5.
    3. The necessary upgrade from AIR 2.0 to AIR 2.5 fails.
    Here's the log output:
    [2011-04-05:14:20:06] Bootstrapper begin with version 2.5.0.16600 on Win x86
    [2011-04-05:14:20:06] Installed runtime (2.0.4.13090) located at c:\Program Files\Common Files\Adobe AIR
    [2011-04-05:14:20:06] Launching subprocess with commandline "Adobe AIR Application Installer.exe" -silent -location "C:\Program Files\Eye-Fi" -programMenu "C:\Users\prabha\AppData\Local\Temp\AIRB93E.tmp\Eye-Fi Center"
    [2011-04-05:14:20:06] Starting silent app install of file:///C:/Users/prabha/AppData/Local/Temp/AIRB93E.tmp/Eye-Fi%20Center
    [2011-04-05:14:20:06] UI SWF load is complete
    [2011-04-05:14:20:06] UI initialized
    [2011-04-05:14:20:06] Detected native app installer
    [2011-04-05:14:20:06] style being loaded from Resources/stylesNative.swf
    [2011-04-05:14:20:06] Validating the native package at file:///C:/Users/prabha/AppData/Local/Temp/AIRB93E.tmp/Eye-Fi%20Center
    [2011-04-05:14:20:10] unpackaging/validation is complete
    [2011-04-05:14:20:10] starting cleanup of temporary files
    [2011-04-05:14:20:10] application installer exiting
    [2011-04-05:14:20:10] Subprocess Application Installer failed (9)
    [2011-04-05:14:20:10] Bootstrapper end with exit code 9
    Any ideas on why this might be happening?
    Sean

    Hi Sean,
    I asked one of our devs about this and here's what he had to say:
    I think this is a limitation of the installers, and not a new one. In graphical mode, when the runtime encounters an air file with an unrecognized namespace it triggers an immediate update of the runtime with some corresponding UI. But when we're in silent mode we can't show an update UI, so we just fail. If you're going to do a silent install of an air app during your install, you need to have some logic to ensure the runtime is sufficient before you start, either by having copy or the latest runtime in your installer or by downloading it. I think this sort of thing is spelled out in our redistribution kit, but it may be less obvious with native installers, which normally always update themselves
    Hope this helps.  If this isn't sufficient, would you mind opening a new bug on this so we can follow up further?
    http://bugbase.adobe.com
    Thanks,
    Chris

  • Yosemite on MacBook Air - Third time installed, now will not be startup disk.  Disk Utility says OK. Disk Warrior says 375 pages of bad .plist files.  How delete plist files?

    Yosemite on MacBook Air - Third time installed, now will not be startup disk.  Disk Utility says OK. Disk Warrior says 375 pages of bad .plist files.  How delete plist files?
    What does "Accessibility" mean?

    Had the same problem, finally realized that the FileVault Encryption was struck at 19%. Speed back up to normal after I disabled FileVault using terminal command - sudo fdesetup diable
    To check whether the FileVault is the culprit, go to System Preferences --> Security & Privacy --> FileVault to see if encryption is in progress.. For me the blue bar was less than a quarter with status 'estimating time remaining'..
    Then open Terminal and type in: sudo fdesetup disable
    It will then ask for the admin password (to be it asked twice), then it was disabled... Back to normal life again..
    Here is my terminal log for reference:
    Last login: Tue Oct 21 23:05:13 on console
    Gowthams-MBP:~ asgowtham$ fdesetup status
    FileVault is On.
    Encryption in progress: Percent completed = 18.80
    Gowthams-MBP:~ asgowtham$ fdesetup status
    FileVault is On.
    Encryption in progress: Percent completed = 18.80
    Gowthams-MBP:~ asgowtham$ fdesetup status
    FileVault is On.
    Encryption in progress: Percent completed = 18.80
    Gowthams-MBP:~ asgowtham$ sudo fdesetup disable
    Password:
    Enter a password for '/':
    ..fdes.
    FileVault has been disabled.
    Gowthams-MBP:~ asgowtham$ fdesetup status
    FileVault is Off.

  • PDF Export fails because of "bad" TIF files

    I'm having this problem with InDesign CS3 on MacBook Pro, OS 10.5
    PDF export fails occasionally, becasue of some "bad" TIF files. The weird part is that those files are completely good TIF files, which are perfectly readable by any other program! After I resave the supposedly bad file again, it helps, and the PDF export works fine. BUT - imagine me working with a project with 800 images?!! Thanks to some good scripting and forum people, I have found a way to locate the bad images quite fast by using a script that exports each page as a separate PDF, then at least I know at which page it fails. But it's a hassle to do that every time!
    Last time I found about 60 "bad" files out of 862.
    Why the heck InDesign treats some TIF files as bad? Even if it does, it could at least create a log file, that will tell me at which page the export failed! this could be a real help!
    I've asked this question in Photoshop forums, but one of the employees replied that Photoshop doesn't produce bad files. Well, I'm not sure I can belevie that, but that's what they say.

    What settings do you use when you save as TIFF ?
    On PC platform sometimes InDesign treat TIFFs as "bad" when they are exported with "for Mac" settings.
    Or maybe you should switch do PSD format ?
    robin
    www.adobescripts.co.uk

  • BEA-382513: OSB Replace action failed: bad value for type element anyType

    Hello, in OSB I get this strange error message on my XQUERY TRANSFORMATION.
    *<faultstring>BEA-382513: OSB Replace action failed updating variable "response":*
    com.bea.wli.common.xquery.XQueryException:
    *Error parsing XML: {err}XP0006: "*
    *element {http://xmlns.oracle.com/pcbpel/adapter/db/top/CS2AdapterSelectOffenePosten_v0_5}Cs2DebitorOpVieCollection*
    *{ {http://www.w3.org/2004/07/xpath-datatypes}untypedAny }":*
    bad value for type element
    *{http://xmlns.oracle.com/pcbpel/adapter/db/top/CS2AdapterSelectOffenePosten_v0_5}cs2RechungungenResponse*
    *{ {http://www.w3.org/2001/XMLSchema}anyType }*
    *</faultstring>*
    I'm a pl/sql developer and I have no idea what this error message is telling me.
    In this forum I'v read someting about a wrong namespace declaration. I can't see any wrong value on my xml (ok, I'm not the specialist here...)
    Maybe someone of you xquey cracks might have a look at my code?
    This is what I have:
    _1.) a XQuery variable called cs2RechnungenResponse with this content:_
    <cs2:Cs2DebitorOpVieCollection
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:cs2="http://xmlns.oracle.com/pcbpel/adapter/db/top/CS2AdapterSelectOffenePosten_v0_5">
         <cs2:Cs2DebitorOpVie>
              <cs2:f40Konto>333</cs2:f40Konto>
              <cs2:AMT_BEZEICHNUNG>Amt für Gesundheit</cs2:AMT_BEZEICHNUNG>
              <cs2:f40Belnr>555</cs2:f40Belnr>
              <cs2:f40Sohab>S</cs2:f40Sohab>
              <cs2:f40Dmbet>100</cs2:f40Dmbet>
              <cs2:f40Fadat>2011-05-05T00:00:00.000+02:00</cs2:f40Fadat>
              <cs2:f40Valut>2011-05-05T00:00:00.000+02:00</cs2:f40Valut>
              <cs2:f40Mahns/>
              <cs2:f40F40Sj>0</cs2:f40F40Sj>
         </cs2:Cs2DebitorOpVie>
    </cs2:Cs2DebitorOpVieCollection>
    _2. a xquery with this code:_
    (:: pragma bea:global-element-parameter parameter="$cs2RechnungenResponse" element="ns2:cs2RechnungenResponse" location="../adapters/cs2_adapters/xsd/CS2AdapterSelectOffenePosten_v0_5_table.xsd" ::)
    (:: pragma bea:global-element-return element="ns0:getDebitorRechnungResponse" location="../../interfaces/RechnungServiceTypes_v0_6.xsd" ::)
    declare namespace ns3 = "http://www.llv.li/common/types/v1";
    declare namespace ns2 = "http://xmlns.oracle.com/pcbpel/adapter/db/top/CS2AdapterSelectOffenePosten_v0_5";
    declare namespace ns1 = "http://www.llv.li/fin/types/v1";
    declare namespace ns0 = "http://www.llv.li/fin/services/rechnungService/v1";
    declare namespace xf = "http://tempuri.org/fin_sb/RechnungsService/transformations/CARI_CS_2DBAdpter_to_RechnungsServiceGetOffenePosten_v0_5/";
    declare function xf:CARI_CS_2DBAdpter_to_RechnungsServiceGetOffenePosten_v1_0($cs2RechnungenResponse as element(ns2:cs2RechnungenResponse))
    as element(ns0:getDebitorRechnungenResponse) {
    <ns0:getDebitorRechnungenResponse schemaVersion="0.6">
              if ($cs2RechnungenResponse/ns2:Cs2DebitorOpVie) then
              <ns0:debitorRechnungList>
         for $Cs2DebitorOpVie in $cs2RechnungenResponse/ns2:Cs2DebitorOpVie
         return
         <ns0:debitorRechnung>
              <ns1:peid>0</ns1:peid>
              <ns1:rechnungsnummer>{ data($Cs2DebitorOpVie/ns2:f40Belnr) }</ns1:rechnungsnummer>
              <ns1:rechnungsdatum>{ xs:date(fn-bea:remove-timezone-from-dateTime(data($Cs2DebitorOpVie/ns2:f40Fadat))) }</ns1:rechnungsdatum>
              <ns1:faelligAm>{ xs:date(fn-bea:remove-timezone-from-dateTime(data($Cs2DebitorOpVie/ns2:f40Valut))) }</ns1:faelligAm>
         <ns1:behoerde>{ data($Cs2DebitorOpVie/ns2:AMT_BEZEICHNUNG) }</ns1:behoerde>
         <ns1:positionList>
              <ns1:position>
                   <ns1:positionsnummer>1</ns1:positionsnummer>
                                                 <ns1:betrag>{ data($Cs2DebitorOpVie/ns2:f40Dmbet) }</ns1:betrag>
                                                 <ns1:waehrung>
                                                      <ns1:isoCode>CHF</ns1:isoCode>
                                                      <ns1:bezeichnung>Schweizer Franken</ns1:bezeichnung>
                                                 </ns1:waehrung>
              </ns1:position>
              </ns1:positionList>
         <ns1:status>offen</ns1:status>
              if ($Cs2DebitorOpVie/ns2:f40Mahns/text() > "") then
                   <ns1:mahnstufe>{ xs:int(data($Cs2DebitorOpVie/ns2:f40Mahns)) }</ns1:mahnstufe>
              else ()
         </ns0:debitorRechnung>
         </ns0:debitorRechnungList>
         else ()
    <ns0:resultatStatus>
         <ns3:code>Erfolgreich</ns3:code>
         <ns3:beschreibung>Rechnungen aus MFK fehlen</ns3:beschreibung>
    </ns0:resultatStatus>     
    </ns0:getDebitorRechnungenResponse>
    declare variable $cs2RechnungenResponse as element(ns2:cs2RechnungenResponse) external;
    xf:CARI_CS_2DBAdpter_to_RechnungsServiceGetOffenePosten_v1_0($cs2RechnungenResponse)
    _3. this should result in this response, but it doesn't_
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
    <soap-env:Body xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
    <v1:getDebitorRechnungenResponse schemaVersion="0.6" xmlns:v1="http://www.llv.li/fin/services/rechnungService/v1">
    <v1:debitorRechnungList>
    <v1:debitorRechnung>
    <v11:peid xmlns:v11="http://www.llv.li/fin/types/v1">333</v11:peid>
    <v11:rechnungsnummer xmlns:v11="http://www.llv.li/fin/types/v1">555</v11:rechnungsnummer>
    <v11:rechnungsdatum xmlns:v11="http://www.llv.li/fin/types/v1">2011-05-05</v11:rechnungsdatum>
    <v11:faelligAm xmlns:v11="http://www.llv.li/fin/types/v1">2011-05-05</v11:faelligAm>
    <v11:behoerde xmlns:v11="http://www.llv.li/fin/types/v1">Amt für Gesundheit</v11:behoerde>
    <v11:positionList xmlns:v11="http://www.llv.li/fin/types/v1">
    <v11:position>
    <v11:positionsnummer>1</v11:positionsnummer>
    <v11:betrag>100</v11:betrag>
    <v11:waehrung>
    <v11:isoCode>CHF</v11:isoCode>
    <v11:bezeichnung>Schweizer Franken</v11:bezeichnung>
    </v11:waehrung>
    </v11:position>
    </v11:positionList>
    <v11:status xmlns:v11="http://www.llv.li/fin/types/v1">offen</v11:status>
    </v1:debitorRechnung>
    </v1:debitorRechnungList>
    <v1:resultatStatus>
    <v11:code xmlns:v11="http://www.llv.li/common/types/v1">Erfolgreich</v11:code>
    <v11:beschreibung xmlns:v11="http://www.llv.li/common/types/v1">Rechnungen aus MFK fehlen</v11:beschreibung>
    </v1:resultatStatus>
    </v1:getDebitorRechnungenResponse>
    </soap-env:Body>
    </soapenv:Envelope>
    But I do not get this expectet result, all I get is the BEA-382513: OSB Replace action failed: bad value for type element anyType?
    Any help would be appreciated.
    Thanks
    Best regards
    rk

    cs2RechungungenResponse or cs2RechnungenResponse ? the error message says cs2RechungungenResponse, but the actual element is cs2RechnungenResponse (one less "u")

  • Ssh -W causes "getsockname failed: Bad file descriptor" errors

    Using openssh 6.5p1-2, this error(?) message occurs frequently
        getsockname failed: Bad file descriptor
    This has been reported to debian and mindrot:
        https://bugzilla.mindrot.org/show_bug.cgi?id=2200
        https://bugs.debian.org/cgi-bin/bugrepo … bug=738693
    and has been fixed:
        https://bugzilla.mindrot.org/attachment.cgi?id=2407
    Can this patch be applied to the official arch openssh package?

    Have a look on the Arch bugtracker and see if it has been logged. If it hasn't, and hasn't been accepted upstream, you could open a report there: it's more likely a developer will see it there...

  • An output module failed. The file may be damaged or corrupted.

    Whenever I try to render something in After Effects CC 13.1.1, an error message pops up, saying "After Effects error: Rendering error while writing to file '[not going to disclose]' An output module failed. The file may be damaged or corrupted (-1610153464)."
    Screenshot of the error message:
    I tried reinstalling QuickTime (7), repaired it, updated After Effects to the latest version(as I am writing this), checked firewall software, and used other formats such as AVI.
    Adobe Media Encoder (CC 2014-latest version) won't work with me, either.
    I sent the composition to Adobe Media Encoder, and this is what I got, no progress here.
    Screenshot:
    It took a while to connect to the dynamic link server, and failed.
    This is a log of what has happened in Adobe Media Encoder.
    - Source File: C:\Users\Default.BronyGue\Documents\not done\pinkcoverart_AME\tmpAEtoAMEProject-Pink Intro1.aep
    - Output File: C:\Users\Default.BronyGue\Documents\not done\pinkcoverart_AME\Pink Intro.mp4
    - Preset Used: YouTube HD 720p 29.97
    - Video: 1280x720 (1.0), 29.97 fps, Progressive
    - Audio: AAC, 320 kbps, 48 kHz, Stereo
    - Bitrate: VBR, 2 pass, Target 5.00 Mbps, Max 5.00 Mbps
    - Encoding Time: 00:00:12
    06/29/2014 02:29:14 PM : Encoding Failed
    The Operation was interrupted by user
    (no need to worry about the above part)
    - Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage1.aep
    - Output File: C:\Users\Default.BronyGue\Videos\chilledup.wmv
    - Preset Used: Custom
    - Video: 1280x720 (1.0), 29.97 fps, Progressive
    - Audio: Windows Media Audio 10 Professional, 96000 Hz, Stereo, 24 bit
    - Bitrate: CBR, 2 pass, Max 10000.00 kbps
    - Encoding Time: 00:01:42
    11/22/2014 12:24:39 AM : Encoding Failed
    The Operation was interrupted by user
    - Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage1.aep
    - Output File: C:\Users\Default.BronyGue\Videos\chilledup.mpg
    - Preset Used: Custom
    - Video: 1280x720, 29.97 fps, Progressive, Quality 75
    - Audio: MPEG Audio, 384 kbps, 48 kHz, Stereo, 16 bit
    - Bitrate: VBR, 1 Pass, Min 4.00, Target 15.00, Max 18.50 Mbps
    - Encoding Time: 00:00:11
    11/22/2014 12:52:11 AM : Encoding Failed
    The Operation was interrupted by user
    - Encoding Time: 00:00:51
    11/22/2014 12:53:51 AM : Encoding Failed
    Export Error
    Error compiling movie.
    Unknown error.
    - Encoding Time: 00:00:46
    11/22/2014 08:39:46 AM : Encoding Failed
    Export Error
    Error compiling movie.
    Unknown error.
    - Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage4.aep
    - Output File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\montage.mpg
    - Preset Used: Match Source - High bitrate
    - Video:
    - Audio:
    - Bitrate:
    - Encoding Time: 00:00:00
    11/22/2014 10:06:45 AM : Encoding Failed
    Could not read from the source. Please check if it has moved or been deleted.
    I need some help! Any solutions?.
    Computer Specs:
    AMD FX-6300
    8GB 1600MHz DDR3 RAM
    NVIDIA GeForce GTX 650 Ti BOOST
    1TB 7200RPM Hard Drive
    Windows 8.1 Update 1(with latest updates)
    EDIT(11/23/2014 8:31PM PST): For some reason, other projects work for me just fine. I am not sure why it is not working on one project.
    Screenshot of a new project other than this I am rendering at the time of writing this edit:

    Can other projects can output to the same output location? Yes
    Can other projects render with the same render settings (codec, format, etc.)? Yes.
    If you create a new composition and just add a solid layer to it with no effects in the same project does it render? No. I still get the error.
    Can you render that brand new comp with the same render settings, output settings, output location etc.? Yes.
    If so, what effects are present in the offending comp? Twixtor Pro in all the cinematics/clips, Motion Tile and Transform for pan/crop & wiggle, Magic Bullet Looks and Bad TV Warping preset with just Wave Warp & Venetian Blinds for color correction, Gradient Ramp for text, Bad TV Warping preset with everything for effect, Transform for fade in/out, and ReelSmart Motion Blur v4.1.2 for motion blur.
    Also, what scripts are you using? Just the Move Anchor Point script I found from one of Mt. Mograph's videos, Summit 16 - 2.5D Minecraft Steve - After Effects - YouTube.
    Have you ever installed any third-party codec packs? (I've heard of some codec packs causing weird issues like this.) Yes, (not everything I have, just everything I can think of and find) I have K-Lite codec pack, Fraps, x264vfw, and Xvid MPEG-4 codec.

  • I recently bought two iMac quad core i5 processor speed 2.5 Ghz. Every time I use Air Drop and I send a file from one iMac to the other, a black curtain drops and I am asked to restart the computer!!! What can I do?

    I recently bought two iMac quad core i5 processor speed 2.5 Ghz. Every time I use Air Drop and I send a file from one iMac to the other, a black curtain drops and I am asked to restart the computer!!! What can I do?

    That's a kernel panic and indicates some sort of problem either with the computer's hardware or software. Visit The XLab FAQs and read the FAQ on diagnosing kernel panics. It would help to post the panic log: Mac OS X- How to log a kernel panic.
    Meanwhile, try booting the computers into Safe Mode then restarting normally. If this is simply a disk repair or cache file problem then this may fix it.
    You can also try creating a new admin account on each computer then booting into the new account. This would help determine if the problem is related to a bad file in the user accounts.

  • Compilation errors- sbfocus exec failed: No such file...

    Please help, as I am geting these errors when I am compiling my test program using make file.
    I am using SUN SPARC server with Forte Compiler Collection 7 on new server.
    I am moving my HP C++ code on this new server.
    I have created my string, util and ipc libraries using ar - ruv command. all the libraries are created OK (means no errors) and named them as libstring.a etc.
    CC -g -sb -compat=5 -compat=4 -I. -I/ford/thishost/u/rbhave/mqrouter/include -c test.C
    /opt/SUNWspro/bin/CC test.o -L/ford/thishost/u/rbhave/mqrouter/lib -L. -lutils -lipc -lstring
    libldstab: file test.o: sbfocus exec failed: No such file or directory: SourceBrowser data will be lost
    Undefined first referenced
    symbol in file
    unsafe_ostream::do_opfx(void) /ford/thishost/u/rbhave/mqrouter/lib/libstring.a(strops.o)
    cout test.o
    unsafe_ostream::do_opfx(void) /ford/thishost/u/rbhave/mqrouter/lib/libstring.a(strops.o)
    ld: fatal: Symbol referencing errors. No output written to a.out
    *** Error code 1
    make: Fatal error: Command failed for target `/ford/thishost/u/rbhave/mqrouter/error_log/test'
    Thanks in advance.
    Ravi

    You usually cannot mix -compat=4 and -compat=5 code in the same program. The C++ Migration Guide(search on docs.sun.com) that comes with the compiler explains the limitations.
    When building a C++ static (.a) library, you should use
    CC -xar
    instead of
    ar
    so that any required template instances get included in the library.
    The warning message about sb probably means that the -sb or -xsb option was not used consistently. Use it when compiling and when linking, or not at all. (You don't have to use it on all compilations, but you'll be missing some symbol data.)
    - Rose

  • ORA-39000: bad dump file specification

    Hi ,
    i exported the dumpfile with %U and its genereated successfully with suffix of 101..102..till 243.
    But while importing its searching the file from 01 02 and so in other env.
    Could you please assist.
    Actual file name start with:
    Dump file set for EXPDPUSER.EXPFULL_NW is:
      +LMDRPRDERDWDB_ASM_DATA_DISK9/asm_dpump/prod_data_expdb_nw101.dmp
      +LMDRPRDERDWDB_ASM_DATA_DISK8/asm_dpump/prod_data_expdb_nw201.dmp
      +LMDRPRDERDWDB_ASM_DATA_DISK9/asm_dpump/prod_data_expdb_nw102.dmp
      +LMDRPRDERDWDB_ASM_DATA_DISK8/asm_dpump/prod_data_expdb_nw202.dmp
      +LMDRPRDERDWDB_ASM_DATA_DISK9/asm_dpump/prod_data_expdb_nw103.dmp
      +LMDRPRDERDWDB_ASM_DATA_DISK8/asm_dpump/prod_data_expdb_nw203.dmp
      +LMDRPRDERDWDB_ASM_DATA_DISK9/asm_dpump/prod_data_expdb_nw104.dmp
      +LMDRPRDERDWDB_ASM_DATA_DISK8/asm_dpump/prod_data_expdb_nw204.dmp
      +LMDRPRDERDWDB_ASM_DATA_DISK9/asm_dpump/prod_data_expdb_nw105.dmp
      +LMDRPRDERDWDB_ASM_DATA_DISK8/asm_dpump/prod_data_expdb_nw242.dmp
      +LMDRPRDERDWDB_ASM_DATA_DISK9/asm_dpump/prod_data_expdb_nw143.dmp
    Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    With the Partitioning, Automatic Storage Management, OLAP, Data Mining
    and Real Application Testing options
    ORA-39001: invalid argument value
    ORA-39000: bad dump file specification
    ORA-31640: unable to open dump file "+LMDRSITERDB_ASM_DATA1/dpump/PROD_data_expdb_NW01.dmp" for read
    ORA-17503: ksfdopn:2 Failed to open file +LMDRSITERDB_ASM_DATA1/dpump/PROD_data_expdb_NW01.dmp
    ORA-15173: entry 'PROD_data_expdb_NW01.dmp' does not exist in directory 'dpump'Thanks,

    Mishra wrote:
    Hi ,
    i exported the dumpfile with %U and its genereated successfully with suffix of 101..102..till 243.
    But while importing its searching the file from 01 02 and so in other env.
    Could you please assist.
    Use the SAME format (with the %U) that you used for the export.
    This:
    "+LMDRSITERDB_ASM_DATA1/dpump/PROD_data_expdb_NW01.dmp"does not look anything like these:
    "+LMDRPRDERDWDB_ASM_DATA_DISK9/asm_dpump/prod_data_expdb_nw101.dmp":p

  • Arch Won't boot after lockup: "Failed to read file" [SOLVED]

    So like many stories, this one begins with a "Sudo pacman -Syu".
    Everything was updating fine, but then my system locked up.  I let it set for awhile, but when I couldn't even get a console, I finally rebooted (yes, bad, I know).
    I was about half-way through the upgrading process.
    Now my system will not boot, and I only get a "Failed to read file" error.
    I chrooted into my system through the live disk, and managed to finish the upgrade (I had to fix a few files, and reinstall some manually). I tried a "mkinitcpio -p linux," but no luck.
    Is there anything else I could post that might be helpful?  This error does not tell me a whole lot.
    Thanks!
    Last edited by thewooster (2014-06-18 16:11:51)

    I did a little more looking around, and found a few more problems.
    When I run a "mkinitcpio -p linux" now, I get:
    ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    It also appears I have a number of "empty" directories "pacman -S linux"
    resolving dependencies...
    looking for inter-conflicts...
    Packages (1): linux-3.14.6-1
    Total Installed Size: 70.27 MiB
    Net Upgrade Size: 0.00 MiB
    checking keyring...
    checking package integrity...
    loading package files...
    checking for file conflicts...
    checking available disk space...
    reinstalling linux...
    >>> Updating module dependencies. Please wait ...
    depmod: ERROR: failed to load symbols from /lib/modules/3.14.6-1-ARCH/extramodules/fglrx.ko.gz: Invalid argument
    >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    ==> ERROR: Unable to write to /boot/initramfs-linux.img
    ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    ==> ERROR: Unable to write to /boot/initramfs-linux-fallback.img
    ldconfig: File /usr/lib/libclamunrar_iface.so is empty, not checked.
    ldconfig: File /usr/lib/libfontforgeexe.so.2.0.0 is empty, not checked.
    ldconfig: File /usr/lib/libfontforgeexe.so.2 is empty, not checked.
    ldconfig: File /usr/lib/libgunicode.so.4 is empty, not checked.
    ldconfig: File /usr/lib/libfontforgeexe.so is empty, not checked.
    ldconfig: File /usr/lib/libcord.so is empty, not checked.
    ldconfig: File /usr/lib/libgdraw.so.5 is empty, not checked.
    ldconfig: File /usr/lib/libgdk_pixbuf_xlib-2.0.so is empty, not checked.
    ldconfig: File /usr/lib/libgnome-menu-3.so is empty, not checked.
    ldconfig: File /usr/lib/libgdk_pixbuf-2.0.so is empty, not checked.
    ldconfig: File /usr/lib/libgccpp.so is empty, not checked.
    ldconfig: File /usr/lib/libhunspell.so is empty, not checked.
    ldconfig: File /usr/lib/libgdk_pixbuf-2.0.so.0.3000.8 is empty, not checked.
    ldconfig: File /usr/lib/libgccpp.so.1 is empty, not checked.
    ldconfig: File /usr/lib/libwbclient.so.0 is empty, not checked.
    ldconfig: File /usr/lib/libhunspell-1.3.so is empty, not checked.
    ldconfig: File /usr/lib/libgioftp.so is empty, not checked.
    ldconfig: File /usr/lib/libgdk_pixbuf-2.0.so.0 is empty, not checked.
    ldconfig: File /usr/lib/libgdraw.so is empty, not checked.
    ldconfig: File /usr/lib/libX11-xcb.so.1 is empty, not checked.
    ldconfig: File /usr/lib/libgioftp.so.2 is empty, not checked.
    ldconfig: File /usr/lib/libclamunrar.so.6 is empty, not checked.
    ldconfig: File /usr/lib/libfontforge.so is empty, not checked.
    ldconfig: File /usr/lib/libX11.so.6 is empty, not checked.
    ldconfig: File /usr/lib/libgdk_pixbuf_xlib-2.0.so.0 is empty, not checked.
    ldconfig: File /usr/lib/libclamav.so.6 is empty, not checked.
    ldconfig: File /usr/lib/libgutils.so.2.0.0 is empty, not checked.
    ldconfig: File /usr/lib/libgnome-menu-3.so.0.0.1 is empty, not checked.
    ldconfig: File /usr/lib/libgunicode.so is empty, not checked.
    ldconfig: File /usr/lib/libtalloc.so.1 is empty, not checked.
    ldconfig: File /usr/lib/libclamunrar.so is empty, not checked.
    ldconfig: File /usr/lib/libclamunrar_iface.so.6.1.23 is empty, not checked.
    ldconfig: File /usr/lib/libpytalloc-util.so.2 is empty, not checked.
    ldconfig: File /usr/lib/libcord.so.1 is empty, not checked.
    ldconfig: File /usr/lib/libX11-xcb.so is empty, not checked.
    ldconfig: File /usr/lib/libgccpp.so.1.0.3 is empty, not checked.
    ldconfig: File /usr/lib/libtalloc.so.2 is empty, not checked.
    ldconfig: File /usr/lib/libtalloc.so is empty, not checked.
    ldconfig: File /usr/lib/libwbclient.so is empty, not checked.
    ldconfig: File /usr/lib/libX11.so.6.3.0 is empty, not checked.
    ldconfig: File /usr/lib/libfontforge.so.2 is empty, not checked.
    ldconfig: File /usr/lib/libgutils.so is empty, not checked.
    ldconfig: File /usr/lib/libclamunrar.so.6.1.23 is empty, not checked.
    ldconfig: File /usr/lib/libclamunrar_iface.so.6 is empty, not checked.
    ldconfig: File /usr/lib/libhunspell-1.3.so.0.0.0 is empty, not checked.
    ldconfig: File /usr/lib/libtalloc.so.2.1.1 is empty, not checked.
    ldconfig: File /usr/lib/libgutils.so.2 is empty, not checked.
    ldconfig: File /usr/lib/libfontforge.so.2.0.0 is empty, not checked.
    ldconfig: File /usr/lib/libtalloc-compat1-2.1.1.so is empty, not checked.
    ldconfig: File /usr/lib/libgc.so.1 is empty, not checked.
    ldconfig: File /usr/lib/libpytalloc-util.so is empty, not checked.
    ldconfig: File /usr/lib/libcord.so.1.0.3 is empty, not checked.
    ldconfig: File /usr/lib/libgunicode.so.4.0.0 is empty, not checked.
    ldconfig: File /usr/lib/libX11.so is empty, not checked.
    ldconfig: File /usr/lib/libpytalloc-util.so.2.1.1 is empty, not checked.
    ldconfig: File /usr/lib/libgc.so is empty, not checked.
    ldconfig: File /usr/lib/libhunspell-1.3.so.0 is empty, not checked.
    ldconfig: File /usr/lib/libgdk_pixbuf_xlib-2.0.so.0.3000.8 is empty, not checked.
    ldconfig: File /usr/lib/libgdraw.so.5.0.0 is empty, not checked.
    ldconfig: File /usr/lib/libX11-xcb.so.1.0.0 is empty, not checked.
    ldconfig: File /usr/lib/libwbclient.so.0.11 is empty, not checked.
    ldconfig: File /usr/lib/libgioftp.so.2.0.0 is empty, not checked.
    ldconfig: File /usr/lib/libgc.so.1.0.3 is empty, not checked.
    ldconfig: File /usr/lib/libclamav.so is empty, not checked.
    ldconfig: File /usr/lib/libgnome-menu-3.so.0 is empty, not checked.
    ldconfig: File /usr/lib/libclamav.so.6.1.23 is empty, not checked.
    Gummiboot will not reinstall "gummiboot -path=$esp install":
    Failed to check file system type of : no such file or directory
    I have considered doing a reinstall, but I have so many customizations that I would prefer not to lose them.  I do have an rsync backup, but it is a little old, and do have separate home/root partitions, but wouldn't I still lose a fair amount of customizations?

  • TMS_ORA10g: fatal: libclntsh.so.10.1: open failed: No such file or director

    While trying to boot up the Tuxedo Server, we are getting the error:-
    exec TMS_ORA10g -A :
    ld.so.1: TMS_ORA10g: fatal: libclntsh.so.10.1: open failed: No such file or directory
    This file, libclntsh.so.10.1, is present in the /oracle/app/product/10g2/db_1/lib32 dir, which is included the LD_LIBRARY_PATH environment variable. We build the TMS_ORA10g executable with the following command :- buildtms -o TMS_ORA10g -r Oracle_XA and the corresponding entry in the udataobj/RM file is "Oracle_XA:xaosw:-L${ORACLE_HOME}/lib32 ${ORACLE_HOME}/lib32/libsql10.a -lm -lC -lclntsh"

    Hi,
    After your advice we migrated our Tuxedo to 64 bit's and now all the object files and libraries are of 64 bit. The problem related with buildtms has been resolved. But even after this we are facing an issue, while building the Application Server(BAS). When we do BAS (Build Application Server), we get this error:-
    Undefined first referenced
    symbol in file
    int sqlcxt(void**,unsigned*,sqlexd*,sqlcxp*) /users/appbin/lib/libUTCS/xlerrlib.a(dm_olpa.o)
    tpurcode /users/appbin/lib/libUTCS/tuxedoreal.a(oltp.o)
    tperrno /users/buildsrv/InitW1/security/homebs/src/lib/sparc/security_qpp1.a(security_et_sy00102
    getusr_dtls.o)
    int sqlbuft(void**,char*) /users/appbin/lib/libUTCS/xlerrlib.a(dm_olpa.o)
    ld: fatal: Symbol referencing errors. No output written to /users/buildsrv/InitW1/server/securityET
    What could be the possible reason for the same.
    The entire command for BAS is
    CC -xtarget=ultra -xarch=v9 -xarch=v9 -w -mt -I$TUXDIR/include -o /users/buildsrv/In
    itW1/server/securityET BS-6ddd.c -L${TUXDIR}/lib /users/buildsrv/InitW1/server/sttqz.c /users/buildsrv/InitW1/server/main.c
    /users/appbin/lib/libUTCS/conv.o /newutitux/newtux/tuxedo9.1/lib/libtux.a /oracle/app/product/10g2/db_1/lib/libsql10.a /use
    rs/appbin/lib/libUTCS/rpcqz_date.o /users/appbin/lib/libUTCS/dm_auditinfo.o /users/buildsrv/InitW1/security/homebs/src/lib/s
    parc/security_qpp1.a /users/buildsrv/InitW1/security/homebs/src/lib/sparc/security_query1.a /users/buildsrv/InitW1/security/
    homebs/gencode/lib/sparc/security_dm1.a /users/buildsrv/InitW1/security/homebs/gencode/lib/sparc/security_const.a /users/bui
    ldsrv/InitW1/security/homebs/gencode/lib/sparc/security_rpc1.a /users/buildsrv/InitW1/security/homebs/gencode/lib/sparc/secu
    rity_rpcqry1.a /users/compogsw/InitW1/lib/libUTCS/sparc/master_qpp1.a /users/compogsw/InitW1/lib/libUTCS/sparc/master_query1
    .a /users/compogsw/InitW1/lib/libUTCS/sparc/master_dm1.a /users/compogsw/InitW1/lib/libUTCS/sparc/master_rpc1.a /users/compo
    gsw/InitW1/lib/libUTCS/sparc/master_rpcqry1.a /users/compogsw/InitW1/lib/libUTCS/sparc/ext_intf_qpp1.a /users/compogsw/InitW
    1/lib/libUTCS/sparc/ext_intf_query1.a /users/compogsw/InitW1/lib/libUTCS/sparc/ext_intf_dm1.a /users/compogsw/InitW1/lib/lib
    UTCS/sparc/ext_intf_rpc1.a /users/compogsw/InitW1/lib/libUTCS/sparc/ext_intf_rpcqry1.a /users/compogsw/InitW1/lib/libUTCS/sp
    arc/scheme_qpp1.a /users/compogsw/InitW1/lib/libUTCS/sparc/scheme_query1.a /users/compogsw/InitW1/lib/libUTCS/sparc/scheme_d
    m1.a /users/compogsw/InitW1/lib/libUTCS/sparc/scheme_rpc1.a /users/compogsw/InitW1/lib/libUTCS/sparc/scheme_rpcqry1.a /users
    /compogsw/InitW1/lib/libUTCS/sparc/common_rpc1.a /users/compogsw/InitW1/lib/libUTCS/sparc/party_rpc1.a /users/compogsw/InitW
    1/lib/libUTCS/sparc/holding_rpc1.a /users/compogsw/InitW1/lib/libUTCS/sparc/oth_srvc_rpc1.a /users/compogsw/InitW1/lib/libUT
    CS/sparc/comp_red_rpc1.a /users/compogsw/InitW1/lib/libUTCS/sparc/utility_lib.a /users/appbin/lib/libUTCS/libmem.a /users/ap
    pbin/lib/libUTCS/utillib.a /users/appbin/lib/libUTCS/dmstdlib.a /users/appbin/lib/libUTCS/tuxedoreal.a /users/appbin/lib/lib
    UTCS/xlerrlib.a /users/appbin/lib/libUTCS/xlclasslib.a /users/appbin/lib/libUTCS/libclass.a /users/appbin/lib/libUTCS/utilli
    b.a /users/appbin/lib/libUTCS/Qmystring.o -ltux -lbuft -L${ORACLE_HOME}/lib -lclntsh -lfml -lfml32 -lengine -R/usr/lib/lwp
    -lpthread -lposix4 -lsocket -lnsl -lm -lnsl -lsocket
    Please reply
    Regards,
    Namit Maheshwari

Maybe you are looking for

  • Date Field in XML

    Hi friends, I am creating a Java application, and i am giving input and output data in XML. Can anyone tell me how to specify DATE element in XML. I think there is Swing date spinners in Swings, similar to that is there any Date element in XML Thanks

  • File to idocs - sequence of inbound processing

    Hi everybody, we have a file to (2) idocs scenario. In XI we map the received data of vendors into two idocs (adrmas and cremas). After building the idocs we send them in that sequence to the reveiver systems (recommended). The problem is that in the

  • ME11 update error : Error during insert EINE with key

    HI All, I am facing the below problem..For one particular user update request is failing in ME11 transaction.Error was found in function module name ME_UPDATE_INFORECORD.I also check if it is number range problem but it is not the case.. Please help

  • Frustrated my computer says flashplayer is installed and enabled but it won't work, any suggestions?

    Really frustrated with flashplayer.  The latest update won't work.  It is installed and enabled but anywhere I go to watch something that uses flashplayer it says I need to install it!

  • Trying to Boot Camp with Windows 8.1 Problem

    I'm trying to Boot Camp my Mac with Windows 8.1 and have been getting this problem: "The disk cannot be partitioned because some files cannot be moved." I did a search for help with this topic and found 100s of threads with the same problem. However,