LWAPP AP finds controller without benefit of option 43

This is quite the head scratcher. I have installed about 7 AP's that pulled a DHCP address from a scope that (accidentally) had no DHCP option 43 associated to it.
It is my impression this should not of worked. The LWAPP firmware is 4.0.179.11
but is full of AP's that did not find the controller with out option 43.
How could this be?

LWAPP AP's discover controller thru other methods as well. DHCP Option 43 is only one of those methods.
> Pre-Configured (aka Primed) AP's will remember their previously joined controller's Mgmt IP address in NVRAM
> DHCP Option 43
> DNS entry 'CISCO-LWAPP-CONTROLLER.localdomain' lookup
> Local broadcast domain (same subnet)
> OTAP - Messages from neighboring AP's
Your AP's must have found the controller thru one of these methods.
Does this help (feel free to rate this response).

Similar Messages

  • How do I find photos without a keyword tag?

    How do I find photos without a keyword tag?
    And by the way a further question regarding keyword tags remains unanswered...Why is there a difference between the number next to the keyword and the actual index number in the keyword folder?

    I will try and explain in more detail to ensure we don't talk past each other.
    I'm in "Catalog" and "All Photographs" is highlighted.
    I selected to show the "Index Number" under "Library View Options".
    In "Keyword List" I have main keywords such as Europe, Africa and Asia with no number to the right of it.
    If I open the Europe keyword I have a list of countries each of them with a number next to them.
    Next to Spain there is now showing the number 46.
    I open "Spain" by clicking on the arrow to the right of the number.
    Now all the photos with the Spain tag is shown but there are only 23 photo.  Under Portugal there is 80 shown but only 40 photos is shown.  Under Ireland the keyword only 11 is shown but once open there are 1132 photos.
    There is not one keyword with the correct number next to it.
    As a fairly new LR user it just appears to me that the two function don't "speak" or "correlate" with each other.

  • Already bought quicktime pro but still running without the pro options

    Hello.
    I have already bought quicktime pro but after I had to reinstall it is running again without the pro options. I logged into apple.com and there is nowhere where I can find my actualisation or key code which I have paid for to make it run as pro.
    Does anyone know where to find it or how to fix this problem so it runs as pro again without having to pay for it again?
    Thank you for your help,
    kind regards
    fybs

    If you've lost the email Apple sent you containing the Pro key, log into your account in the Apple Store and click on the Downloadable Software Purchases link. You should find the key shown there.
    Regards.

  • Finder Window Sizes and View Options

    In an earlier message under Mac OS X Panther it was recommended that I post a new message in the AppleScript forum.
    I'm looking for a way to automate the repetitive task of resizing Finder windows and resetting view options. For example resetting a hundred folders to the same window size and screen position with the same view options. This requires manually adjusting each window one by one.
    A solution could be an AppleScript that would automate this task.
    The following is the earlier message:
    http://discussions.apple.com/message.jspa?messageID=1283081#1283081
    I mistakenly deleted all the preference files for the Finder window options on my 17 inch PowerBook (.DS_Store Files).
    This has returned all Finder windows to default settings for window sizes and view options.
    I use custom widow sizes for all my folders that nicely fit the 17 inch screen on my PowerBook, leaving enough desktop space on the right for the hard drive icons and the Dock that I always keep vertical on the right.
    I have a 12 inch PowerBook as well. And it has it's own custom window size that fits it's much smaller screen. It has always been a complaint of mine to have to manually reset windows whenever I needed to transfer folders with Bluetooth file exchange.
    Resetting Finder window sizes and view option has always been a time consuming problem. Now to have to do it over again for hundreds of windows is a huge task that is way to manual.
    The Finder is customizable. There must be a way to set the options for one window and be able to use those adjustments for other windows without having to re adjust each setting manually.
    There was an application called Finder Window Manager. Maybe someone knows of another application that can do this of task or another way around this issue.
    Photoscene
    Powerbook G4 17 inch   Mac OS X (10.4.3)   Tiger/Panther

    Photoscene,
    I think if you repost this to the AppleScript link, someone there will have a solution for you (in the form of an applescript that you can run)...
    http://discussions.apple.com/forum.jspa?forumID=724
    Give it a shot (I'm not clever enough to give you a good script yet, but someone there will be!)
    Bob

  • Finder Sidebar without text, just icons?

    How can I get the Finder Sidebar without text, just the icons?
    (I want it as small as possible.) Thanks.

    There is no way to have it display icons only, and there is no way to shrink it down beyond a certain point. You USED to be able to shrink it by dragging, until the text disappeared leaving the icons only, but that changed with Leopard. The screenshot you saw was undoubtedly of an earlier version of the OS. Furthermore, in Leopard if you turned it off you also turned off the toolbar. In Snow Leopard it is now possible to turn off the Sidebar, but keep the toolbar: either go to the View menu and select Hide Sidebar, or press the keyboard shortcut Command-Option-S. Clicking the lozenge in the upper right corner of a Finder window still turns off both the Sidebar and toolbar.
    Francine
    Francine
    Schwieder

  • OWB10gR2 on RAC without Enterprise ETL option

    Documentation says that "Without the Enterprise ETL option, you can install the Warehouse Builder repository in a Real Applications Cluster environment for the limited purposes of executing in that environment". What means "limited" ??

    I'm probably not really the person you want to hear from, but I have had some experiences in this area that I can share.
    I have purchased both the Enterprise ETL and Data Quality options, but while I was negotiating with Oracle on licensing (which took several months) we almost went live with 10.2 without using the options. Honestly, the only really important feature that I had to have was the Configurations. We run 2 separate data warehouses for 2 of our businesses, but both share a common set of code. The configurations allow you to set target specific configurations against the same mappings, tables etc which simplifies deployment significantly for me.
    Scheduling has a major shortcoming: you cannot set runtime parameters and unfortunately, I am unable to use it even though it came at quite a price.
    I have been through a fair bit of pain with bugs too. I have 5 custom patches resulting from bugs and have 2 more Sev 1 SRs currently open, waiting for patches. Having siad that, considering the scale of changes in 10.2, they have done pretty well for a first release.
    If you are using an earlier version of OWB, my opinion is you will be fine with 10.2 without the options. There are some nice features that you will no doubt find useful in the options, but they do come at a price if you have many users or CPUs.

  • How can i use an existing vpn connection without using the option "Send all traffic over vpn connection"?

    I have been trying to get my computer (os x.7) to astablish a remote desktop connection to my work computer via a vpn tunnel. In fact I have just discovered that it works fine if i select to "send all traffic over vpn connection" from the options in the advanced setup of the vpn.
    If the option is selected microsofts "Remote desktop connection for mac" works just fine. However without selecting the option it is not taking advantage of the tunnel but tries to connect as if the tunnel would not exist.
    Now the question is how do I get program to use the vpn tunnel without checking the above option?
    Thanks for any hints and pointers.

    Then can her computer be authorized to both accounts?
    Absolutely. You can authorize any given computer to up to five iTunes Store accounts.
    If purchases are made on her account, to a computer authorized to my account, can I put those songs on my iPod?
    If you connect your iPod to her computer, yes. Tracks download only to the computer from which they're purchased, regardless of which iTunes Store account is used for the purchase. Or you could copy the tracks from her computer to yours and then authorize your computer to her iTunes Store account. But that's sort of defeating the original purpose, it would seem to me.
    is it better to buy music through Amazon downloads and/or actually purchasing CDs to avoid the security features iTunes puts on its music?
    That's certainly an option. If it's an entire album I want, I buy CDs. That way I can import them at the quality I want and to whichever of my systems I want. Amazon or one of the other download stores that offer tracks as MP3 are also an option, though for me download stores are best when you just want a couple of tracks off a given CD.

  • What's happening on my iMac?  There are two choices of selected start up disks appearance without hold down option key.  On the other hand, it start up normally show apple picture when I hold option key.

    There are two choices of selected start up disks:Main HD and Recovery HD, appearance without hold down option key.  On the other hand, it start up normally show apple picture when I hold option key.

    Hi artdiva28
    Welcome to Apple Discussions
    First go to *System Preferences > Startup Disk* > select the *Mac OS X 10.5. on Macintosh HD* > click the Lock > hit the Restart button.
    Then if the iMac is still having trouble starting up, insert your Install Disk and restart holding the Option key. In Startup Manager select the Install Disk and boot into it, choose your language, skip the Installer and go up on the menu bar to Utilities and open Disk Utility. In Disk Utility select your Macintosh HD and hit the Repair button. Once finished note any errors and what was repaired for future reference. Quit Disk Utility and restart once again holding the Option key boot back into the Macintosh HD and eject the Install Disk.
    Also see > http://support.apple.com/kb/HT2956
    Dennis

  • Saving a Text data to a PDF file without using print option

    Hi,
    I want to save a Text to a PDF file. I want to assign the path of the PDF file as a default one.
    If I use Print options, then it ask for the file path at the run time.
    Is there any method to save to a PDF file without using print option in Labview 8.2.
    Regards,
    Raja

    This question comes up a lot. Did you try searching? It depends on the PDF printer driver that you're using. See here, here, here, ...

  • How to Find Controller class of  BSP application for particular Iview

    Hi  All,
    Any one please  help me  to find a Controlller class of BSP for an  I view.
    http://Host Name :Port No/sap/bc/gui/sap/its/wosm-cr-->this is for sap retail,
    My requirement  is to change some source code in that particular iview.
    i goine with SE80 Tcode
    with package called WOSM>ITS service>Topic 90-->which contain Mime Objects,Html Templates.
    but i dint find any
    Point will be given!!!

    Hi All,
    My question is where should i find Controller class ?
    i gone with Tcode  SE80>packages>WOST>ITS service>WOSM>Topic90>which contain Mime Objects,HTML Templates.
    i dint find any controller class.
    regards
    Naresh

  • Is it possible run a Wireless LAN controller without a WCS?

    is it possible run a Wireless LAN controller without a WCS?
    How Can I configure the Wireless Lan controller?
    Thanks

    Hi Alfred,
    The WLC can be completly configured and operated without the WCS. The WCS is a nice addition for the management especially when running multiple WLC's but is not required.
    Info on WLC (with Video);
    http://www.cisco.com/en/US/products/ps6366/index.html
    Info on the WCS;
    http://www.cisco.com/en/US/products/ps6305/index.html
    Hope this helps!
    Rob

  • Installing APEX without Oracle Text Option

    Hi,
    Is it possible to install APEX 3.1.2 or 3.2 without the Text Option? The doc says yes, but the apex help can´t be used.
    The last time i tried it on a customer side, i got an installation error (but i can´t remember the text of the error)
    After installing Oracle TEXT it was ok.
    Thanks
    Marco

    Marco,
    I believe Oracle Text is required. This is from [Oracle Installation Document|http://download.oracle.com/docs/cd/E14373_01/install.32/e13366/pre_require.htm#CFHBDFEE] .
    Tip:
    The installer does a prerequisite check for Oracle Text and will exit if it is not installed.
    Ittichai

  • What happens if you never realised you needed your serial number, then your ipod was stolen and you need it...where can if find it without using my ipod

    what happens if you never realised you needed your serial number, then your ipod was stolen and you need it...where can if find it without using my ipod
    please help me!!
    thanks

    See:
    iPod: How to find the serial number
    And this previous discussion:
    iPod touch Serial number help?: Apple Support Communities

  • How to Start process in ProcessChain Without using Repeat option?

    How to Start process in ProcessChain Without using Repeat option?

    Se16 -- table:RSPCPROCESSLOG - click on display entries.
    Entet the variant, instance start date (this info you can get from the "display message" of PC.
    Now execute to display the table entries of RSPCPROCESSLOG.
    Next goto SE37 transaction --enter RSPC_PROCESS_FINISH
    Take the entries from the above table to set the input parameters of the FM.
    I_logid = log_id(from above table)
    I_type = type(from above table)
    i_variant = varaint (from above table)
    i_instance = (from above table)
    Click on F8(EXECUTE)
    now the actual process is set to gree and the process chain will be triggered (rest of the PC with out repeating the step from where is was red).

  • I want to configure the 7330 motion controller without using MAX

    I am new to labview and I have a project where I have to configure the 7330 motion controller without using MAX. What do I need to do to get started doing so?
    Thanks for the help!
    nw2labview

    Hi,
    There are several VI's that are included with the motion driver for configuring your controller.  They are located on the function pallete under Vision and Motion>>Ni-Motion>>Axis Configuration.  Using these VI's you will be able to configure your axis.  But why don't you want to use MAX?  If you are new to LabVIEW I would suggest configuring and testing your motor in MAX first before you start programing.  Once you have it working there you may want to look at several of the examples such as Simple One-Axis Move.vi.  I hope this helps.
    GG

Maybe you are looking for