LWAPP Conversion Error

I am converting an 1131AG autonomous to LWAPP using the conversion tool v3.2. The conversion fails when checking input variables, specifically the text file containing the IP address, telnet username, telnet password, and enable password. I can't believe I'm doing something wrong, as I've read the doc on how to prepare this file and it's just a TXT file with comma separated values. As an example, I tried:
192.168.1.1,scott,password,password and saved it as "IP File.txt"
Can anyone tell me what is wrong with this information?
Regards,
Scott

I meant telenet enabled.... Have you looed at the read me file:
List of Prerequisites before running Upgrade Tool 3.2
1) The Upgrade tool operates only on a PC with the Windows 2000/XP
work station operating system.
2) The Upgrade tool operates only with Cisco Aironet 1100, 1130, 1200,
1240, 1250, 1310(AP mode only) series access points and C3201 WMIC
running Cisco IOS Release 12.3(7)JA software or greater.
3) The person installing and running the Upgrade tool must be
logged in and must be the administrator of the PC.
4) If the Upgrade tool is used on WAN link then link speed should be greater
than or equal to 128 Kbps.
5) The Upgrade tool requires a valid IP file containing IP address,
Username, Password and enable Password separated by a comma, for
each access point to be upgraded.
Note: Have a check that no multiple entries for same AP are mentioned.
6) Presence of Fire-wall may result in download of image failure. So, have
a check of Fire-wall presence and its configuration.
7) All the access-points and Controller must have telnet service enabled.
8) Make a check whether the system time is configured properly.
Post a screen capture of the error if possible.

Similar Messages

LWAPP Conversion of 1252 AP failing

Hello. I am having trouble performing a simple autonomous to lwapp conversion on a 1252 .11n AP. It is the LWAPP model number, but of course it shipped with Autonomous code on it. So I have to convert.
I have version 3.4 of upgrade tool. I create the flat file with the one AP in it and enter all the necessary information. I use the upgrade tool TFTP server and navigate/select the image file: exact file is -> "c1250-rcvk9w8-tar.124-10b.JA3.tar". When I select upgrade I get an error indicating the recovery image is not a valid one.
Does anyone know what I am missing here? Can someone outline the steps? This is my first conversion attempt as I have been running 1000 Series APs for the past 3 years.
Thanks
Chuck

Try this:
Autonomous to LWAPP (Shortcut)
Requirements:
â¢ Image file (The recovery file has the prefix ârcvâ in the image name, such as c1200-rcvk9w7-tar.122-15.JA.tar);
â¢ AP is connected to the Wireless LAN Controller; and
â¢ AP can ping the TFTP server where the image is located.
Procedure
1. Copy the recovery file to the AP using the following command:
archive tar /x tftp:/// flash:
2. Let the AP boot on this image:
boot system flash://.bin
3. Reboot the AP.
OPTIONAL
â¢ DO NOT ALLOW THE AP TO JOIN THE WIRELESS LAN CONTROLLER.
â¢ IF POSSIBLE, type the following commands:
ï¾ clear lwapp private-config (This will bring the AP to factory default.);
ï¾ clear lwapp ap ip address
ï¾ clear lwapp ap hostname
ï¾ clear lwapp ap controller ip address
4. Let the AP connect to the Wireless LAN controller.
OPTIONAL
If an AP refuses to join the Wireless LAN Controller, type the following command from the AP:
lwapp ap controller ip address

Open PO LSMW Quantity conversion error in net price calculation

Hi gurus,
I encountered an error as I was tring to upload purchase orders - "Quantity conversion error in net price calculation". What does this mean and how do I fix this?
Please help
Thanks

Hi Jürgen,
Where in the Material Master can I find the conversion ratio between both units?
Also, I am trying to upload POs for Spare Parts and that's when I get the error. But when I try to use other materials like FGs, everything is ok. I can proceed with the upload without any problem
Please help

How to custom a conversion error in JSF page in JDeveloper

According to the book "Core JavaServer Faces" p213 (fifth edition), if I add the following line to messages.properties file, and specifiy it in the faces-config.xml and .jsp file, then the displayed conversion error message should be my tailored one instead of the default. However, I still get the default error message. Besides, I didn't find "CONVERSION" variable in UIInput class. Is the book wrong? And what's the correct way?
javax.faces.component.UIInput.CONVERSION=Please correct your input

I didn't choose any special in JDeveloper IDE. I just selected "new" to create a file called "message.properties" and put the line there. I didn't specify converters excepts declaring the type in the Jave Beans. I guess the converting is done by the JSF framework automatically. It must be a JSF converter since I created the page as a JSF page.

What does the "conversion error" I get when converting a pdf file to Microsoft word?

What is the "conversion error" I get when converfting a pdf file to aMicrosoft word?

Adobe reader with export to PDF
Sent from my iPhone 5
Marty Kennedy

Error while impdp: ORA-02374: conversion error loading table

Hi,
I am trying to convert the character set from WE8ISO8859P1 to AL32UTF8 using expdp/impdp. for this I first convert WE8ISO8859P1 to WE8MSWIN1252 in source DB to get rid of “lossy” data. I created new database(target) with character set AL32UTF8 and nls_length_semantics = ’CHAR’ and created all the tablespaces as in source DB with auoexend on. I took full export (expdp) of source DB excluding TABLESPACE,STATISTICS,INDEX,CONSTRAINT,REF_CONSTRAINT and imported using impdp to target DB. I found below error in the import log file:
ORA-02374: conversion error loading table "SCTCVT"."SPRADDR_CVT"
ORA-26093: input data column size (44) exceeds the maximum input size (40)
ORA-02372: data for row: CONVERT_STREET_LINE1 : 0X'20202020202020202020202020202020202020202020202020'
I checked with select query on both DBs with below results.
source DB:
04:58:42 SQL> select count(*) from "SCTCVT"."SPRADDR_CVT";
COUNT(*)
74553
target DB:
04:59:24 SQL> select count(*) from "SCTCVT"."SPRADDR_CVT";
COUNT(*)
74552
please suggest me a solution to this.
Thanks and Regards.
Edited by: user12045167 on May 9, 2011 10:39 PM

Thanks for your update maher.
09:15:53 SQL> desc "SCTCVT"."SPRADDR_CVT"
Name Null? Type
SPRADDR_PIDM NUMBER(8)
CONVERT_PIDM VARCHAR2(9 CHAR)
SPRADDR_ATYP_CODE VARCHAR2(2 CHAR)
CONVERT_ATYP_CODE VARCHAR2(2 CHAR)
SPRADDR_SEQNO NUMBER(2)
CONVERT_SEQNO VARCHAR2(2 CHAR)
SPRADDR_FROM_DATE DATE
CONVERT_FROM_DATE VARCHAR2(8 CHAR)
SPRADDR_TO_DATE DATE
CONVERT_TO_DATE VARCHAR2(8 CHAR)
SPRADDR_STREET_LINE1 VARCHAR2(30 CHAR)
CONVERT_STREET_LINE1 VARCHAR2(40 CHAR)
SPRADDR_STREET_LINE2 VARCHAR2(30 CHAR)
CONVERT_STREET_LINE2 VARCHAR2(40 CHAR)
SPRADDR_STREET_LINE3 VARCHAR2(30 CHAR)
CONVERT_STREET_LINE3 VARCHAR2(40 CHAR)
SPRADDR_CITY VARCHAR2(20 CHAR)
CONVERT_CITY VARCHAR2(25 CHAR)
SPRADDR_STAT_CODE VARCHAR2(3 CHAR)
CONVERT_STAT_CODE VARCHAR2(25 CHAR)
SPRADDR_ZIP VARCHAR2(10 CHAR)
CONVERT_ZIP VARCHAR2(15 CHAR)
SPRADDR_CNTY_CODE VARCHAR2(5 CHAR)
CONVERT_CNTY_CODE VARCHAR2(5 CHAR)
SPRADDR_NATN_CODE VARCHAR2(5 CHAR)
CONVERT_NATN_CODE VARCHAR2(5 CHAR)
SPRADDR_PHONE_AREA VARCHAR2(3 CHAR)
CONVERT_PHONE_AREA VARCHAR2(3 CHAR)
SPRADDR_PHONE_NUMBER VARCHAR2(7 CHAR)
CONVERT_PHONE_NUMBER VARCHAR2(7 CHAR)
SPRADDR_PHONE_EXT VARCHAR2(4 CHAR)
CONVERT_PHONE_EXT VARCHAR2(4 CHAR)
SPRADDR_STATUS_IND VARCHAR2(1 CHAR)
CONVERT_STATUS_IND VARCHAR2(1 CHAR)
SPRADDR_ACTIVITY_DATE DATE
CONVERT_ACTIVITY_DATE VARCHAR2(8 CHAR)
SPRADDR_USER VARCHAR2(30 CHAR)
CONVERT_USER VARCHAR2(30 CHAR)
SPRADDR_ASRC_CODE VARCHAR2(4 CHAR)
CONVERT_ASRC_CODE VARCHAR2(4 CHAR)
SPRADDR_DELIVERY_POINT NUMBER(2)
CONVERT_DELIVERY_POINT VARCHAR2(2 CHAR)
SPRADDR_CORRECTION_DIGIT NUMBER(1)
CONVERT_CORRECTION_DIGIT VARCHAR2(1 CHAR)
SPRADDR_CARRIER_ROUTE VARCHAR2(4 CHAR)
CONVERT_CARRIER_ROUTE VARCHAR2(4 CHAR)
SPRADDR_GST_TAX_ID VARCHAR2(15 CHAR)
CONVERT_GST_TAX_ID VARCHAR2(15 CHAR)
SPRADDR_REVIEWED_IND VARCHAR2(1 CHAR)
CONVERT_REVIEWED_IND VARCHAR2(1 CHAR)
SPRADDR_REVIEWED_USER VARCHAR2(30 CHAR)
CONVERT_REVIEWED_USER VARCHAR2(30 CHAR)
SPRADDR_DATA_ORIGIN VARCHAR2(30 CHAR)
CONVERT_DATA_ORIGIN VARCHAR2(30 CHAR)
SPRADDR_CVT_RECORD_ID NUMBER(8)
SPRADDR_CVT_STATUS VARCHAR2(1 CHAR)
SPRADDR_CVT_JOB_ID NUMBER(8)
so here we can see its value is 40 (CONVERT_STREET_LINE1 VARCHAR2(40 CHAR)).
shall i go ahead altering the column?

ME21N--Quantity conversion error in net price calculation

Hi MM experts,
Issue: while creating PO, when attempting to add the net price for line item. but system removes the cost and gives the follow error message says "Quantity conversion error in net price calculation".
The system was not able to convert the order unit into the purchase order price unit. Possible reasons:
i) the conversion results in a net price that is too high, or
ii) the conversion factor for the units has not been properly maintained.
iii) Check whether the units of measure and their conversion factor are correct.
I have checked material master>unit of measure> 1 PL = 22 KG maintained.
Can you please tell me how to resolve this issue?
Appreciated early response.
Thanks in advance.
Suresh

Hi Suresh,
Please check on Material Master Data - Accounting 1 tab - Price Unit
Moshe

Quantity Conversion Error in Net Price Calculation

We are currently using SRM 5.0 ECS where we created a material PO and had a problem with the product not having the language E maintain in the material master. This caused the PO to have status of "error in process" Once we fixed this issue and tried to reprocess the PO we're not getting the following error message in the Application Monitor:
No Instance of Object type PurchaseOrder has been created. External Reference
Puchase Order still contains faulty Items
Quantity Conversion Error in Net Price Calculation
Has anyone seen this or know what we can do to resolve this so that the PO gets replicated in R3?
Thanks in advance.

Hi Robert,
Regarding this backend error E 212 06 Quantity conversion error in net
price calculation.
This error is because in the PO Order price unit is empty. And
quantity is null. So, please enter the quantity and order price unit
for this PO and order the PO again. Or you can retransfer the
PO manually using the FM BBP_PD_PO_TRANSFER_EXEC. (for this fm you need
to input the PO header guid, which you will get it from tx.BBP_PD
by providing PO number and object type as BUS2201).
This has worked for other customers.
Hope this helps,
Kind Regards,
Matthew

Quantity conversion error in net price calculation in BAPI_PO_CREATE1

I'm creating PO from BAPI_PO_CREATE1 .here i'm getting follwing error
quantity conversion error in net price calculation.
plz guide me to remove it.

Are you using quantities directly entered by the user while calling the function to do the net price calculation? If that is the case, you should use FM CONVERSION_EXIT_ALPHA_INPUT to convert the quantity from the external format into the internal one!
Another possibility is that some customizing is missing for converting quantities in different unit of measures (like the quantity in pieces is known, but the pricing calculation is being done on kilos.. but the convertion between these 2 unit of measures is missing).
Good luck!

Sender file adapter conversion Error!!

Hello every one....
I am stuck with a problem...in my scenario,, there are possiblities that file may contain more than required paramters... in such case,,, paramters defined in conversion should go ahead and others should be ignored...
for this very purpose i added the paramter:
row.fieldSeparator                 ,
row.fieldNames                     orderno,authcode,status
row.endSeparator                  'nl'
row.additionalLastFields      ignore
the scenario works fine if the file contains thrree comma separated values but it raises an error if no of paramters increase as :
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting
document line no. 1 according to structure 'row':java.lang.Exception: ERROR in configuration: more
elements in file csv structure than field names specified!
we are using PI 7.... does it require some more configuration in additoin to paramter row.additionalLastFields
any help in this regard would be highly appreciated...
thanx

this parameter is already set, and this is the exact behavior i want from adapter engine... but the problem
here is different... the exception is raised at communication channel's conversion routine level,,, the retry
interval is not the one defined in visual admin but infact the interval (polling) time defined in communication
channel.... the system does'nt stop after 3 attempts,, but infact keep on trying to read it....
one peice of information i have found is in sap note:821267 , which states:
*Q35:*
Q: I have configured a File Sender channel with File Content
Conversion or a custom-developed module, which may throw an
exception. When the File Adapter encounters an invalid file, which
triggers a conversion error or an exception in a module, the
adapter will enter a retry interval and upon each following
processing attempt try to process the faulty file. This basically
prevents the File Adapter from picking up files that are located
after the fauilty file according to the configured sort order. How
can I change this behavior?
o A: This is by design. When the File Adapter encounters an invalid
file, manually remove this file from the configured source
directory. You can configure an alerting rule to get notified each
time this occurs.
We are currently evaluating possible solutions that could be used
to skip this manual interaction.
now can there be a way around to make communication channel read the file only 3 times (value defined in adapter engine profile in visual admin)
I have thaught of writing of module.... but the error is raised even before calling module !!
any further clue ???

Error " conversion error between two character sets" in PI MONI

Hi Experts
I am doing file to Idoc scenario. I am getting the following error in PI MONI "conversion error between two character sets".
please suggest me how to solve the issue.
thanx in advance.

Hi Mickael
Below is the complete error message found in PI MONI.
SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SYSTEM_DUMP</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>PI Server : XBTO80__0000 : Conversion error between two character sets.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Runtime error in J2IUN - "DYNPRO_FIELD_CONVERSION" / "Conversion Error*"

Hi All,
I am facing run time error problem during Transaction J2IUN "DYNPRO_FIELD_CONVERSION" / "Conversion Error"
Error analysis:
The program has been interrupted and cannot resume.
Program "J_1IRUTZN" attempted to display fields on screen 9000.
An error occurred during the conversion of this data.
There was a conversion error in the output of fields to the screen.
The formats of the ABAP output field and the screen field may not match.
Some field types require more space on the screen than in the ABAP
program. For example, a date output field on the screen requires two
more characters than the corresponding field in the ABAP program. When
the date is displayed on the screen, an error occurs resulting in this
error message.
Screen name.............. "J_1IRUTZN"
Screen number............ 9000
Screen field............. "UTIL1-REM_BAL"
Error text............... "FX015: Sign lost."
Other data:
Kindly guide me to resolve the issue.
Regards,
P.S.Chitra

Hi,
Here comes the solution...
Please implemet the SAP note 1252418...
Looking very much relavent to your problem...
Regs,
Lokesh.

Arithmetical errors or conversion errors found in routine ROUTINE_0011

Hi,
I am having a problem when trying to load a cube from an DSO. In the PSA 90 record appears with the error "Arithmetical errors or conversion errors found in routine ROUTINE_0011 record XXX"
I simulated and debbug the load and this routine have the code:
RESULT = ( COMM_STRUCTURE-/bic/zom_icoci
/ COMM_STRUCTURE-/bic/zom_icnrv ) * c_hundred.
I know that the field COMM_STRUCTURE-/bic/zom_icnrv can come with value zero and return me the msg error but I saw that none of the 90 fields are zero (value <> 0) in the DSO. And besides there are others records equals to the records with error that not generate the arithmetical error.
Could you help me to solve this problem?
Regards,

Hi,
Check if the c_hundred variable has same type as that of two keyfigures used in the formula.
Regards
Akhan

** File Content Conversion Error in Receiver CC - How to solve this?

Hi friends,
My target structure looks like below.
EmployeeJobDetails                                        --> Message Type
   JobCode                                                      --> Node
        EmployeeNumber            xsd:string
        Domain                           xsd:string
   JobTrack                                                     --> Node
         Department                    xsd: string
         Position                         xsd: string
I use the FCC parameters in the receiver CC as below:
Recordset Structure:    JobCode,JobTrack
JobCode.fieldSeparator = |
JobCode.endSeparator = 'nl'
JobTrack.fieldSeparator = |
JobTrack.endSepartor = 'nl'.
Because, we want the output like below
1099|Raja
Accts|JuniorAccountant
1100|Ram
HR|Recruiter
like this.
In this scenario Source is XML and target is txt file.
I am using XSLT Mapping. The FCC works fine, if my source input file contains some records. But, when we send empty source XML file as below
<?xml version="1.0" encoding="UTF-8"?>
<EMPLOYEE_DATA/>
Mapping works fine. Message is processed successfully in SXMB_MONI. The payload in response also comes with Message Type name like below
<EmployeeJobDetails    namespace >
</EmployeeJobDetails>
While convert this, the system throws below error.
Error Message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)'
Friend, how to convert this when source XML is empty.
But, if we remove JobTrack node in target strucutre and remove the JobTrack parameters in CC, then if we send the same empty XML file FCC is working fine and we get the target text file 0 KB. (Amazing !!)
But, in the first case, how to solve the issue?
Kind Regards,
Jegathees P.

Hi friends,
If we remove JobTrack node in target strucutre and remove the JobTrack parameters in CC, then if we send the <b>same empty XML file</b> FCC is working fine and<b> we get the target text file 0 KB</b>. (Amazing !!)
But, if we give parameters like JobCode,JobTrack then send pass the same empty file, we face the problem 'File Content Conversion' Error.
Searching solution for this problem ...

Character conversion error

Hi all,
We are getting the following error when trying to parse an xml string resource - Character conversion error: "Illegal ASCII character, 0xc2" (line number may
be too low)-. We have not been able to get around this. We have tried creating the InputSource two different ways:
reader = new StringReader(stringSource);
src = new InputSource( reader );
and
src = new InputSource(new InputStreamReader(new ByteArrayInputStream(stringSource.getBytes())));
The problem does appear to go away if we treat the DTD we are validating against as a file. If we set it has a uri, we get the above problem.
Is anyone else experiencing this problem?
Any help would be greatly appreciated.
Thanks in advance,
Greg

Hi,
2 possible solutions:
1) try using the xerces parser instead of sun's parser
2) look at the posting at the following url and see wether the posted solution solves your problem: http://forums.java.sun.com/thread.jsp?forum=34&thread=67558
Hope this helps,
Kurt.

LWAPP Conversion Error

Similar Messages

Maybe you are looking for