LWAPP's losing names and showing up as default MAC address's
I have been having random LWAPP's that have been configured previously showing up as the original names as if they were just installed (APxxx:xxxx:xxxx). I know this becasue the location field is the location of where they are, and AP group name is also set to the location they are. What would cause this?
WLC = 7.0.98.0
AP = 1142n 12.4(23c)JA
This problem is here and there...it is happening to about 5 percent of my overall AP's.
AP event log from controller:
AP event log download completed.
======================= AP Event log Contents =====================
*Mar 1 00:15:54.702: %CDP_PD-2-POWER_LOW: All radios disabled - NEGOTIATED WS-C4506-E (5475.d01d.8052)
*Mar 1 00:16:02.966: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Aug 30 19:37:23.001: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Aug 30 19:37:23.001: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.200.1.10 peer_port: 5246
*Aug 30 19:37:23.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Aug 30 19:37:23.734: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.200.1.10 peer_port: 5246
*Aug 30 19:37:23.734: %CAPWAP-5-SENDJOIN: sending Join Request to 10.200.1.10
*Aug 30 19:37:23.734: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Aug 30 19:37:23.751: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE
*Aug 30 19:38:04.730: %CDP_PD-2-POWER_LOW: All radios disabled - NEGOTIATED WS-C4506-E (5475.d01d.8052)
*Aug 30 19:38:12.291: *** Access point reloading. Reason: NEW IMAGE DOWNLOAD ***
*Aug 30 19:38:12.292: %SYS-4-PUPDATECLOCK: Periodic Clock update with ROMMON failed, because size left in ROMMON (4294967295),
*Mar 1 00:15:54.161: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:15:54.184: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:15:54.191: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:15:55.155: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
--More-- or (q)uit
*Mar 1 00:15:55.176: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:16:02.982: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Aug 30 19:39:56.001: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Aug 30 19:39:56.001: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.200.1.10 peer_port: 5246
*Aug 30 19:39:56.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Aug 30 19:39:56.744: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.200.1.10 peer_port: 5246
*Aug 30 19:39:56.744: %CAPWAP-5-SENDJOIN: sending Join Request to 10.200.1.10
*Aug 30 19:39:56.744: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Aug 30 19:39:56.940: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*Aug 30 19:39:57.047: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Aug 30 19:39:57.051: %CAPWAP-5-CHANGED: CAPWAP changed state to UP
*Aug 30 19:39:57.052: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Aug 30 19:39:57.252: %LWAPP-3-CLIENTEVENTLOG: Received AP Syslog IP Address(255.255.255.255) configuration.
*Aug 30 19:39:57.258: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller Wism-Slot1Proc1
*Aug 30 19:39:57.263: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Aug 30 19:39:57.263: %LWAPP-3-CLIENTEVENTLOG: SSID RPS added to the slot[0]
*Aug 30 19:39:57.264: %LWAPP-3-CLIENTEVENTLOG: SSID RPS-GUEST added to the slot[0]
*Aug 30 19:39:57.264: %LWAPP-3-CLIENTEVENTLOG: SSID ILOVEDOGS added to the slot[0]
*Aug 30 19:39:57.265: %LWAPP-3-CLIENTEVENTLOG: SSID RPS added to the slot[1]
*Aug 30 19:39:57.284: %DOT11-4-NO_HT: Interface Dot11Radio1, Mcs rates disabled on vlan 2 due to not using AES encryption or en
*Aug 30 19:39:57.287: %DOT11-4-NO_HT: Interface Dot11Radio0, Mcs rates disabled on vlan 2 due to not using AES encryption or en
*Aug 30 19:39:57.287: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Aug 30 19:39:57.287: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
--More-- or (q)uit
*Aug 30 19:39:57.287: %LWAPP-3-CLIENTEVENTLOG: SSID RPS-GUEST added to the slot[1]
*Aug 30 19:39:57.287: %LWAPP-3-CLIENTEVENTLOG: SSID ILOVEDOGS added to the slot[1]
*Aug 30 19:39:57.297: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Aug 31 02:29:15.271: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Aug 31 02:29:15.324: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Aug 31 02:29:15.327: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Aug 31 02:29:15.411: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Aug 31 03:34:40.892: *** Access point reloading. Reason: Recvd RESET req from Controller ***
*Mar 1 00:15:55.598: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:15:55.622: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:15:55.630: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:15:56.594: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:15:56.616: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:16:02.969: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Aug 31 03:33:11.001: %CAPWAP-3-ERRORLOG: Selected MWAR 'RPS-5508-2'(index 0).
*Aug 31 03:33:11.001: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Aug 31 03:33:11.001: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.200.1.21 peer_port: 5246
*Aug 31 03:33:11.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Aug 31 03:33:11.842: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.200.1.21 peer_port: 5246
*Aug 31 03:33:11.842: %CAPWAP-5-SENDJOIN: sending Join Request to 10.200.1.21
*Aug 31 03:33:11.842: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Aug 31 03:33:11.975: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*Aug 31 03:33:12.100: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
--More-- or (q)uit
*Aug 31 03:33:12.104: %CAPWAP-5-CHANGED: CAPWAP changed state to UP
*Aug 31 03:33:12.105: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Aug 31 03:33:12.312: %LWAPP-3-CLIENTEVENTLOG: Received AP Syslog IP Address(255.255.255.255) configuration.
*Aug 31 03:33:12.318: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller RPS-5508-2
*Aug 31 03:33:12.322: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Aug 31 03:33:12.322: %LWAPP-3-CLIENTEVENTLOG: SSID RPS added to the slot[0]
*Aug 31 03:33:12.324: %LWAPP-3-CLIENTEVENTLOG: SSID RPS-GUEST added to the slot[0]
*Aug 31 03:33:12.324: %LWAPP-3-CLIENTEVENTLOG: SSID RPS added to the slot[1]
*Aug 31 03:33:12.324: %LWAPP-3-CLIENTEVENTLOG: SSID RPS-GUEST added to the slot[1]
*Aug 31 03:33:12.342: %DOT11-4-NO_HT: Interface Dot11Radio1, Mcs rates disabled on vlan 1 due to not using AES encryption or en
*Aug 31 03:33:12.346: %DOT11-4-NO_HT: Interface Dot11Radio0, Mcs rates disabled on vlan 1 due to not using AES encryption or en
*Aug 31 03:33:12.346: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Aug 31 03:33:12.346: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Aug 31 03:33:12.354: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Aug 31 03:36:11.493: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Aug 31 03:36:11.503: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Aug 31 03:51:52.242: %CAPWAP-5-CHANGED: CAPWAP changed state to DOWN
*Aug 31 03:51:52.336: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Aug 31 03:51:52.342: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Aug 31 03:51:52.345: %CAPWAP-5-CHANGED: CAPWAP changed state to UP
*Aug 31 03:51:52.346: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Aug 31 03:51:52.346: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Aug 31 03:51:52.346: %LWAPP-3-CLIENTEVENTLOG: SSID RPS added to the slot[0]
--More-- or (q)uit
*Aug 31 03:51:52.346: %LWAPP-3-CLIENTEVENTLOG: SSID RPS added to the slot[1]
*Aug 31 03:51:52.347: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Aug 31 03:51:52.347: %LWAPP-3-CLIENTEVENTLOG: SSID RPS-GUEST added to the slot[0]
*Aug 31 03:51:52.347: %LWAPP-3-CLIENTEVENTLOG: SSID RPS-GUEST added to the slot[1]
*Aug 31 03:51:52.370: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Aug 31 03:51:52.370: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Aug 31 03:51:52.379: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Aug 31 03:52:02.470: *** Access point reloading. Reason: Recvd RESET req from Controller ***
*Mar 1 00:15:52.829: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:15:52.853: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:15:52.860: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:15:52.960: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:15:52.963: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:16:02.966: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Apr 20 11:02:16.001: %CAPWAP-3-ERRORLOG: Selected MWAR 'RPS-5508-2'(index 0).
*Apr 20 11:02:16.001: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Apr 20 11:02:16.001: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.200.1.21 peer_port: 5246
*Apr 20 11:02:16.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Apr 20 11:02:16.991: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.200.1.21 peer_port: 5246
*Apr 20 11:02:16.991: %CAPWAP-5-SENDJOIN: sending Join Request to 10.200.1.21
*Apr 20 11:02:16.991: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Apr 20 11:02:17.279: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*Apr 20 11:02:17.459: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
--More-- or (q)uit
*Apr 20 11:02:17.463: %CAPWAP-5-CHANGED: CAPWAP changed state to UP
*Apr 20 11:02:17.463: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Apr 20 11:02:17.549: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller RPS-5508-2
*Apr 20 11:02:17.556: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Apr 20 11:02:17.556: %LWAPP-3-CLIENTEVENTLOG: SSID RPS added to the slot[0]
*Apr 20 11:02:17.582: %DOT11-4-NO_HT: Interface Dot11Radio0, Mcs rates disabled on vlan 1 due to not using AES encryption or en
*Apr 20 11:02:17.583: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Apr 20 11:02:17.583: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Apr 20 11:02:17.583: %LWAPP-3-CLIENTEVENTLOG: SSID RPS-GUEST added to the slot[0]
*Apr 20 11:02:17.583: %LWAPP-3-CLIENTEVENTLOG: SSID RPS added to the slot[1]
*Apr 20 11:02:17.583: %LWAPP-3-CLIENTEVENTLOG: SSID RPS-GUEST added to the slot[1]
*Apr 20 11:02:17.591: %DOT11-4-NO_HT: Interface Dot11Radio1, Mcs rates disabled on vlan 1 due to not using AES encryption or en
*Apr 20 11:02:17.591: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Apr 20 13:10:23.885: *** Access point reloading. Reason: Recvd RESET req from Controller ***
*Mar 1 00:15:54.051: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:15:54.075: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:15:54.082: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:15:55.045: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:15:55.067: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:16:02.971: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Apr 20 13:11:59.001: %CAPWAP-3-ERRORLOG: Selected MWAR 'RPS-5508-2'(index 0).
*Apr 20 13:11:59.001: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Apr 20 13:11:59.001: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.200.1.21 peer_port: 5246
--More-- or (q)uit
*Apr 20 13:11:59.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Apr 20 13:11:59.836: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.200.1.21 peer_port: 5246
*Apr 20 13:11:59.836: %CAPWAP-5-SENDJOIN: sending Join Request to 10.200.1.21
*Apr 20 13:11:59.836: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Apr 20 13:11:59.965: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*Apr 20 13:12:00.090: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Apr 20 13:12:00.095: %CAPWAP-5-CHANGED: CAPWAP changed state to UP
*Apr 20 13:12:00.095: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Apr 20 13:12:00.183: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller RPS-5508-2
*Apr 20 13:12:00.196: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Apr 20 13:12:00.196: %LWAPP-3-CLIENTEVENTLOG: SSID RPS added to the slot[0]
*Apr 20 13:12:00.196: %LWAPP-3-CLIENTEVENTLOG: SSID RPS-GUEST added to the slot[0]
*Apr 20 13:12:00.196: %LWAPP-3-CLIENTEVENTLOG: SSID RPS added to the slot[1]
*Apr 20 13:12:00.196: %LWAPP-3-CLIENTEVENTLOG: SSID RPS-GUEST added to the slot[1]
*Apr 20 13:12:00.217: %DOT11-4-NO_HT: Interface Dot11Radio1, Mcs rates disabled on vlan 1 due to not using AES encryption or en
*Apr 20 13:12:00.223: %DOT11-4-NO_HT: Interface Dot11Radio0, Mcs rates disabled on vlan 1 due to not using AES encryption or en
*Apr 20 13:12:00.223: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Apr 20 13:12:00.223: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Apr 20 13:12:00.229: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Apr 20 14:20:10.592: %CAPWAP-3-ERRORLOG: Received a upload request from controller for event log buffer
Similar Messages
-
I just bought a MacBook Pro, and need to d/l my photos from my memory card reader. iphoto keeps coming up as the app to use, but the column on the left says "No name, and shows 0 photos on the black screen. How do I view the photos on the reader?
Did it... When I clicked on "No name", a file folder came up and, I forgot to put MacBook Pro in the name bar... That was it! Maybe someone else can use this post Hopefully...
-
How do i eliminate an old apple id that belongs to daughter and shows up as default
how do i eliminate an old apple that belongs to daughter and shows as my default I want to eliminate it completely
You can log out of an account in iTunes on a computer via Store > Sign Out and you can then sign in with the account that you want to use - similarly on an iPad, iPhone or iPod Touch you can sign out by tapping on it in Settings > Store and then sign in. Accounts can't currently be deleted.
Any content that was purchased or downloaded via your daughter's account will remain tied to that account and can't be transferred to a different account, so only that account will be able to authorise its content on your computer or download updates to its apps. -
How can i recover my admin name and password from my i mac. i could not get through to it.
how can i recover my admin name and password from my i mac. i could not get through to it.
What do you mean "I could not get through to it" Are you trying to login remotely?
-
Can't remember administrator's name and password for my e-mac.
Can't remember administrator's name and password for my e-mac. How can I reset it. A friend needs this computer and I need to update and remove software, etc.
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access the Menubar at top.
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Reset Password from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Reset Password.
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
Admin Hack...
http://www.hackmac.org/?q=node/4
Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... give the new User a different name than an existing one. -
Hi I am a new iPad user and would like to know how to ensure I am using wifi instead of my network provider. At the top of my screen it is showing my providers name and a signal strength. I have a router at home that I want it to use. I will also be traveling to Italy tomorrow and want to ensure it automatically hooks up to the wifi where we will be staying. Any help would be much appreciated.
I copied this from another thread. I made the important line bold. Make sure that WiFi is turned on if you want to use WiFi first.
After successfully connecting to a wireless network, the network and network settings are saved on your iPad. If wi-fi access is on, when returning within range of a wireless network you have successfully connected your iPad with, your iPad will automatically connect to the wireless network, or it should. If 3G access is on, when leaving the range of an available wi-fi network you have access to, it will switch to AT&T's cellular network automatically. If both are on, your iPad should switch between the two automatically and seamlessly. Your iPad will always connect to the fastest wireless connection available at the time as long both options are enabled. Between an available wi-fi network that you have access to and are in range of and AT&T's cellular network, it will or should be the wi-fi network.
Here is the thread.
https://discussions.apple.com/thread/2419363?start=0&tstart=0 -
802.1x and wired dynamic vlans on MAC addresses
Hi All,
I would like to setup our new offices with dynamic vlans determined by the MAC address of the device connecting. So I need a database of MAC addresses in groups for which vlan they will go in, with separate vlans for printers and servers and computers and BYOD. If this can work for wireless too then even better.
I've done some reading but am really struggling to find the information I need.
We have a Windows domain and brand new 3850 Cisco switches.
Can anyone steer me in the right direction (or tell me how to do it!) please?
Thanks for reading.Hi,
So you need to perform MAB authentication. As you mentioned, you will need to create a DB of MAC entries.
In order to configure the Windows server (2003 or 2008?) to assign the dynamic VLAN you need to define the Remote Access Policies and create the custom attributes. For example:
Tunnel-Medium-Type. Select a value appropriate to the previous selections you have made for the policy. For example, if the network policy you are configuring is a wireless policy, select Value: 802 (Includes all 802 media plus Ethernet canonical format).
Tunnel-Pvt-Group-ID. Enter the integer that represents the VLAN number to which group members will be assigned.
Tunnel-Type. Select Virtual LANs (VLAN).
You can find more information here:
Configure a Network Policy for VLANs
VLAN Attributes Used in Network Policy
802.1X Authentication Services Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3850 Switches)
HTH. -
Ping problem in the neighborhood and Msan can see the mac address of router
Hi everyone
i have a router 1941/K9 with card EHWIC-4SHDSL-EA ,i have configure this card in my router , the problem is I can not ping the ip @ Neighbourhood and the MSAN can't also see the mac-address of the router do you notice that the interface in the MSAN and in the router is UP / UP
anybody help meHi,
An ethernet interface will be always up/up and it goes down only if there is problem between the given port and the connected one. The issue can be anywhere else in the middle. -
LAN and WAN share the same MAC address -- could this be a security issue?
When I bought the AEBS(n), I was a bit surprised to see only one ethernet MAC address listed (on bottom of unit, or was it in config utility?), in addition to wireless MAC. My main router has two ethernet MACs.
So last nite, I investigated. I confirmed my suspicion that both the WAN port and the LAN ports share the same MAC address! My setup has the AEBS WAN port plugged into my home LAN's main router, and a Linux machine plugged into a LAN port of the AEBS.
View of AEBS WAN side (from main router at 192.168.1.1)
ii# arp
Seconds IP Address MAC Address
734 66.130.224.1 001120A87AF5 -- ISP router
789 192.168.1.21 0016CBC430A6 -- AEBS WAN port
28 192.168.1.33 0010DC47DC53 -- home PC
824 192.168.1.73 00065BB2F295 -- work PC
View of AEBS LAN side (from a Linux box at 10.0.1.41)
root@LKG7CAE25 # cat /proc/net/arp
IP address HW type Flags HW address Mask Device
10.0.1.1 0x1 0x2 00:16:CB:C4:30:A6 * eth0
10.0.1.1 on the LAN side of AEBS and 192.168.1.21 on the WAN side of the AEBS both use the same MAC address, 00:16:CB:C4:30:A6.
I tried to provoke some leakage between the two sides (for example with broadcast packets), but haven't been able to do it so yet. Perhaps the switch in front of the eth MAC has enough smarts to keep the two subnets separate? Still it sort of worries me, if I used the AEBS as my only router, that both WAN and LAN go thru the same ethernet MAC (same h/w). I browsed here but found no discussion on this.
Comments anyone?.... This is why there are separate MAC addresses
for ethernet and wireless, they are physically
different networks. In the case of the WAN/LAN, both
are ethernet-type networks but are physically
distinct (this is the purpose of a router like the
AEBS), so having the same MAC address on both sides
won't cause any sort of collision nor should it be
possible to leak across networks. MAC addresses can't
be used for routing beyond the physical network.
If it is indeed two different NICs sharing a single MAC, then indeed it is not an issue as you would never want to connect these two NICs together. But is it really two NICs?
My worry is that these two subnets are on the same physical network, with some magic going on to keep them separate anyway. Do we have some picture of AEBS internals? Maybe that would answer the question... -
When sending e-mails, how can I show only the name and not include the e-mail address?
When sending e-mails, how can I show only the name of the recipient and not include their full e-mail address?
Hi beverlyfromnull,
Have you added the recipients to your address book? -
Changed network name and now e-print e-mail address doesn't work
I have a 6500A Plus Deskjet. I have an hpconnected account and changed my e-print e-mail address to something I would remember. Then I changed the name of my network. I have to get a new claim code ..... I enter it and when I try to choose my e-print addrss, it says that it is already been taken. I was on the hp site within a half an hour of changing my network name.
Hi rfmal1,
Thank you for joining the HP Support Forums. I understand that you needed to set up the ePrint feature of your Officejet 6500A after changing the name of your network.
Your previous ePrint email address will not be available, once an ePrint email address has been used it is no longer available to be claimed again. I am sorry if this has caused any inconvenience.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
Cannot re-install Adobe reader. Says "Adobe reader wants to make changes" and gives my name not e-mail address then asks for a PW. I received a new PW and can sign into Adobe.com but am unable to install Adobe reader on my MAC.
Enter the password of your Mac.
-
I want to set up MANY for my employees but control the billing as a perk. Is this even possible?
Thunderbird has no limit.
See http://kb.mozillazine.org/Thunderbird_:_FAQs_:_Create_Mailing_List -
Outlook 2010 name and company not showing in outlook emails
When someone emails me my name is not showing up at the top of the email - only my email address. Also in the same email some of the cc'd people's names are showing along with their email addresses, for some people you see their name and company and some
people you see only their email address. How do I get our names and company name to show up at the top of emails?
Example:
Cc: Kevin Kxxxx ([email protected]); [email protected]; Rxxx, Pxxx ([email protected]); George H (S.Pxxxx Hxxxx) <[email protected]>That's controlled by the sending copy of Outlook, and depends whether Outlook is aware of the name associated with the email address. For instance, if you send an email using a contact that includes the recipients name that Outlook will add that detail to
the message being sent, but if you manually enter the email address (and Outlook doesn't have the address and name in its autocomplete cache) then just the email address will be displayed.
Most likely, if you receive a message that only has the email address then it would indicate that the sender hasn't received an email from that address previously, and as such Outlook is unable to determine what the name is.
The crucial thing is that there's nothing you can do as the recipient to affect this, it's purely down to the senders Outlook. As the recipient you simply receive the email containing the information that their email client included when it was sent. -
Get Artists and show Artist Name as string
Hi
I'm using VS2013, EF6, WPF
I have tables Media, MediaArtists, Artists
MediaArtist is a bridge table that use MediaId and ArtistId. it's mean that every Media has more Artists.
dbContext db = new dbContext();
mediumDataGrid.ItemsSource = db.Media.Select(m => new{
m.MediaId,
m.Title,
m.LastPlayedDate,
????m.MediaArtists.Select(a => Artist)????
}).ToList();
I want to get the Artists "Name" and show in gridview as Artist1, Artist2, Artist3
can you please let me know how do that?
thanksHello Zorig,
It seems that you are trying to perform a group by comma list in linq, if you data is not larger, you could use the LINQ2Object as below:
var result = db.X.ToList().Select(x => new { XID = x.XID, XName = x.XName, YNames = string.Join(",", x.Y.Select(y => y.XName)) }).ToList();
If data is large, you could check the workaround from Emran Hussain:
http://stackoverflow.com/a/25676673
Or to use store produce for a complex query instead.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Received photo via text, how do I save it in photo gallery?
I received a photo by text. How do I save it to photo gallery?
-
How to read xml file and place it into an internal table...
hello all, can any one help me in - how to read xml data file (placed in application server) and placing the same into an internal table (remove the xml tags or say fetching the xml data without xml tags).
-
Since Adobe Flash ran its latest update on my computer, I have not been able to watch any online videos. How can I fix this problem?
-
Can we add Basic Authentication for Oracle Report 10g?
As we know, Apache supports basic Authentication, and Oracle Report 10g bases on Apache, that means Oracle Report 10g supports Basic Authentication too? Can anyone tell me the steps on how to configure Basic Authentication for Oracle Report 10g? Than
-
How can I find the yahoo toolbar which contains "identity safe" which contains all of my passwords?
I can't find the yahoo toolbar which included identity safe, where all my automatic passwords were located.