LX01 report additional field- MRP controller

Hi, All
I need to add MRP controller for the output list for LX01 transaction can a ny one suggest me which user exit i should use or which structure i should append the field and popultae that fiel in the exit..
Thanks.

Hi dear,
You have to proceed as below.
1) Maintain MRP view for material.
2) With the help of your ABAP er create Z report.
3) Logic to fetch for MRP controller - Go to table MARC and get the MRP controller (field name DISPO) of all the materials displayed in the report.
Edited by: Deepak Kulkarni on Mar 18, 2011 5:31 PM

Similar Messages

How to make field MRP controller optional in Cj20n

Hi All,
Please help to make field MRP controller optional in CJ20n
Cheers,
Nies

Hi ,
we can create a dummy MRP in system and assigne it to the required project profile so that system will not ask u to make this entry. As per my knowledge Mandetory MRP is system requirement we cant by pass it.
Rgds

Sales Analysis Report Additional Field for viewing

Good Day Experts!
Is it possible for us to display an additional field to be viewed in Sales Analysis Report?
I'm talking about a vacant field from BP Master data, and somehow append it into form settings and put it into the report?
Is there any store procedures that we can look for prior to this matter? Our client need something more on that particular issue.
Thank you very much

Hi Elmar,
It is not possible to add field on SAP sales analysis report , but you can create report based on query with required fields.
Check http://wiki.sdn.sap.com/wiki/display/B1/D-SLSalesARModuleSQLPostedto+Wiki link for some sales queries , it might help you.
Thanks,
Neetu

Planner order - change MRP controller

Hi PP Guru
Can I change value in field "MRP controller" when i manual create planned order, MD11 ?
MRP controller is copied from the material master when the material number is checked, but can i change it to another ?
In Prod.Order field "MRP Controller" is editable
In Purch.Req. field "MRP Controller" is editable
In Planned Order field "MRP Controller" is NOT editable.
Thanks.

Hi,
It depends upon your authorisation profile. Normally MRP run, Planned order creation authorisation is given for the MRP controller only. Because MRP controller is the person responsible to plan that particular material. So with out his knowledge you cannot create the planned order.
Regards,
V. Suresh

MC.9 report is showing -ve value when MRP controller selected

Hi Expert,
I'm confuse about the -ve value in MC.9. If i run by using Plant as the selection parameter for month 02.2010, then sorted by valuatted stock value(ascending), it will not show me the -ve value for all materials. But if i run the report by using Plant and MRP controller as the selection parameters,then sorted by valuated stock value(ascending), it shows me the -ve value. why?
Please explain.
Thanks

hi jurgen,
i still not clear. I try to run the report for material A and mrp controller 001. I got the -ve value. But when i run the material without mrp controller, it shows 0. no -ve value. i check in MM03,changes history for the material. MRP controller has been changed few times but the latest is 160. What am i confusing is, what is the relation between MRP controller with the report? What is the function of the report actually? Isn't it suppose to give the same data either i put the MRP controller or not when running the report?
Thanks

How to add additional fields to zreport which contains standard report code

Hi Experts,
In order to add additional fields to standard report i copied the code into zreport but i am unable to add additonal field into report because the code is looking so complex.
standard report:AQZZ/SAPQUERY/FKF1============
     or
sapmenu->accounting->financial accounting->accounts payable->information system->reports for accounts payable accounting->master data->S_ALR_87012087-Addresslist.
Additional feilds to add is :Region,company code,country
Please let me know how toidentify ALV and guide me how to solve this.
Regards,
naresh.

Hello Naresh,
First check whether these three fields are available in the text elements area.
Please write your code in the subroutine %comp_ldesc.
Repeat the code for your three new fields
perform ldesc(rsaqexce) using 'G00010000X010       00 A1'
    %txt1 %txt2 %txt3 'LFA1-LIFNR' LFA1-LIFNR 'LFA1-LIFNR'.
read table %textpool_langu into %textpool_langu_line
                             with key ID = 'I' key = 'A01'.
if sy-subrc is initial. %txt1 = %textpool_langu_line-entry.
else. %txt1 = %txt_unknown.
endif.
So this subroutine will give you the basic list. Now Program is creating ALV with this basic list. So I think you don't need to worry about that. Please have a thorugh look at the code over this perform, and write accordingly.
I think this is enoogh.
Please update if you got the solution, which will be informative for others.
regards,
Antony Thomas
Edited by: Antony Thomas on Jul 27, 2010 7:57 AM

Report for MRP controller and relevant purchasing document

HI
My requirement :We have MRP controller for different diciplines(mech, electrical, Instrumentation.......ect).
I want to search for a report Where it display me the Purchasing document(PO) number by respective decipline.
I tried all the report in MRP controller such as MC.E, MC.D, COOIS.........ect
Thanks in advance
Mujeeb

Hi Mangalraj
Thanks for your answer, but my question is not yet answered.
As you told i did follow accordingly.
When i enter the T.code: ME5A ( i can not find the scope of list ALV but did find the entried as below)
A     3-line + n special
B     2-line + n special
B1     2-line + 2 MRP list
B2     2-line + 2 stock/rq.
B3     2-line + 2 purch.dt.
C     1-line
C1     1-line + stock/rqts.
D
F     Collective release
G     3-line loop
H     2-line loop
I     1-line loop
If i select "C" from the list i'm getting 1 line display but as you told i did press the CTRL+F8 but unable to get the cost) it does not work at all like dat.
I'm using the system version 4.6C. Can you please suggest something on the report.
Thanks & regards,
Mujeeb

Inventory report for the selection of requisitioner and MRP controller

Hello Experts,
Can someone please help me with a standard Inventory report in which we can give input thr requistioner and MRP controller
regards,
YK

Hi,
You will get the requisition no. from EKKO (provided PO has been created otherwise you won't get any record). Find out PO & item no. for the requisition item. Then you can check EKBE table whether GR has been posted or not. If GR has not been posted then there won't be entry in EKBE for that PO & item.
Regards,
Rakesh

How to add additional field to the existing report

hi,
report name is RHXPE_EXPIRED_QUALI
if u execute report alv list is genereted with like this.
object type, id of related object, object name, object type, id of related object,last name, first name like this
where can i get these field descriptios in the prigram becoz many perform ststements r there. i want to add additional field text.
program is:
CORRECTIONS
DATE       CORRECTION NOTE    AUTHOR DESCRIPTION
09.03.2001            0388404 XSC    Wrong list output for multiple Os
05.06.2001 AL0K023393 0410219 Lud    Wrong keydate for search with
                                     Pchbegda and pchendda.
30.01.2002 S6BK000033 0491055 TS     Report: RHXPE_EXPIRED_QUALI
                                     doesn't provide a spool list.
REPORT rhpk_find_pers_with_expired_qu MESSAGE-ID pq.
TABLES : pchdy.
INCLUDES
INCLUDE rhxmacro.
INCLUDE rhpeini0.
TABLES
DATA: objects LIKE hrsobid    OCCURS 1 WITH HEADER LINE.
VARIABLES
DATA: subrc LIKE sy-subrc.
DATA: orgeh_text LIKE t777o-otext.
SELECTION SCREEN
objid
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS:
   pchplvar LIKE p1000-plvar NO-DISPLAY,    "plan version
   pchotype LIKE pchdy-otype NO-DISPLAY. "objecttype
Objid
rhx-f4-objid-data.
SELECT-OPTIONS: pchobjid FOR pchdy-objid_str NO INTERVALS.
Search
PARAMETERS:
pchseark LIKE pchdy-seark.           "matchcode object plom.
SELECTION-SCREEN END OF BLOCK b1.
Objecttime
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
PARAMETERS: se_begd LIKE p1000-begda DEFAULT sy-datum, "'19000101',
            se_endd LIKE p1000-endda DEFAULT high_date.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-005.
PARAMETERS:
   h_events LIKE dynp_rhpp-gen_train, "with training sugg
   h_qual LIKE dynp_rhpp-expired_qual. "with Qual
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN ON pchobjid.
PERFORM check_objid_sign(rhxchk00) USING pchobjid-sign.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pchobjid-low.
rhx-f4-objid-low pchplvar pchotype pchobjid '' ''.
AT SELECTION-SCREEN.
PERFORM check_plvar(rhxchk00) USING pchplvar.
PERFORM check_seark(rhxchk00) TABLES pchobjid
                                USING pchseark pchplvar pchotype.
INITIALIZATION
INITIALIZATION.
PERFORM read_t77s0_parameters_for_pe.
get user parameters/Planvariante und Beginndatum setzen:
pchotype = $orgeh.
CALL FUNCTION 'RHP0_USER_PARAMETERS_GET'
       EXPORTING
            fill_if_initial = 'X'
       IMPORTING
            plvar           = pchplvar
            begda           = se_begd
            endda           = se_endd
          with_key        =
          SUBSTITUTE      =
          ESSENTIAL       = only_essential
            org_unit        = pchobjid-low
      EXCEPTIONS
            OTHERS     = 0.
SE_BEGD = LOW_DATE.   "Correction AL0K023393 0410219
IF NOT pchobjid-low IS INITIAL.
    pchobjid-sign   = 'I'.
    pchobjid-option = 'EQ'.
    APPEND pchobjid.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
correction 0491055
correction was done for getting a spool list in background-processing.
CASE sy-batch.
    WHEN space.
      SUBMIT rhpe_expired_quali
           WITH pchplvar = pchplvar
           WITH pchotype = pchotype
           WITH pchobjid IN pchobjid
           WITH pchbegda = se_begd
           WITH pchendda = se_endd
           WITH h_qual = h_qual
           WITH h_events = h_events
                  AND RETURN.
    WHEN 'X'.
      SUBMIT rhpe_expired_quali
           WITH pchplvar = pchplvar
           WITH pchotype = pchotype
           WITH pchobjid IN pchobjid
           WITH pchbegda = se_begd
           WITH pchendda = se_endd
           WITH h_qual = h_qual
           WITH h_events = h_events
                  TO SAP-SPOOL.
ENDCASE.
END-OF-SELECTION
END-OF-SELECTION.

Hi,
I think you need to show more programs.
you said, the report program is 'RHXPE_EXPIRED_QUALI', but you upload 'rhpk_find_pers_with_expired_qu' program.
usually, ALV field is modifyed in 'PERFORM fieldcatalog_modify', if you use Functional ALV.
Try to search 'fieldcatalog function', you will find easy.
Regard,
SY Kim

Adding Additional field "Supplier name" & "Supplier No" in MB5B Report?

Can i add the above stated two additional fields in the standard report of MB5b, is there any implicit enhancement in the standard report which can help achieve my objective?

Hi,
The possibility to include additional fields in the report MB5B is
limited to MSEG, just as you can see in the text of the
report RM07MLBD_CUST_FIELDS itself:
This include contains the structure for additional fields for report
RM07MLBD ( transaction MB5B )
the following fields are not shown in the list of report
RM07MLBD
If you want to insert some of these fields in the list of the
hidden fields delete the '*' in the type definition.
>>* There are only fields from database table MSEG possible <<<<<<<<<<<
Please use only the following fields, because these fields
are considered during the creation of the field catalog;
plaese consider, that each active field will cost performance
If you need to add aditional information from other tables, like the
Reference Document Number you will need to build your own query.
Regards,
Mauro

How to add Additional fields in standard SAP Report RMCLOBJVN ,TCODE CL6BN

i am facing problem in Report RMclobjvn , TCODE is CL6BN
i have to add some additional fields on the result screen.
but when i search inside the report i could not retrieve any user exits but through a search utility i got 4 user exits of which 2 seem to be useful.these are
Exit name
CLCLRS01 Additional Fields on the Result Screen
CLCLRS02 Fill the Additional Fields on the Result Screen
i activated the these exits and have tried putting in break point in side the include.
But the problem is this that
[b]that CL6BN Tcode is not triggering anyhow these userexits.
does anyone has any solution for adding the additional fields.

Hai Manish
Check the following Links
You can do it in two ways using append structure or include structure of that standard table.
once you added , you need to adjust it and activate using the menu utilities->data base utulity-> Activate and Adjust .
check this SAP help..
for append structure
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb61446011d189700000e8322d00/frameset.htm
for include structure.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb54446011d189700000e8322d00/content.htm
Regards
Sreeni

Additional field in report S_ALR_87011990 - Asset History Sheet

Hi
This is with reference to report S_ALR_87011990 - Asset History Sheet .
I want to add quantity, location etc in this report.
can anybody guide me how to add these additional field in this report as in configuration no such option available.
Regards
DD

Hi,
this is decribed explicitely and detailed in the WIKI entry Include additional fields in Standard Fixed Asset ALV reports.
That´s much faster then enhancing the report. Further more you would still operate on a standard report, not a copy based on the standard report.
Regards,
Markus

Additional Fields for Report FBL1

Dear All
I need to add User Name field (USNAM) and few other fields to the layout for report FBL1(Vendor open line items).
I have added the field USNAM under "Define Additional Fields for Line Item Display". But the field is still not showing up for selection in the report FBL1.
Pls advice.
Rgds
Nitika

Hi Nikita,
Once you have added special filed you have to run the below mentioned program to extend the new filed in FBLxN report.
Run below program from SE38:
RFPOSXEXTEND
BALVBUFDEL
The correct way to fix this is mentioned in SAP note 984305. Running report BALVBUFDEL resets the buffer.
The special field is now available in the layout selection.
Hope this helps.
Pls assign points as way to say thanks

Time reporting screen - additional fields for clock in/clock

Hi all, I have an issue with time reporting that I would appreciate your help in resolving. We would like to add additional fields for clock in/clock out data from external clocks. I think I saw it somewhere but now I cannot find it in the CAC2 configuration. Can you help? Thanks in advance, Maya

see if following link can help:
Custom field added to CATS but not showing in Data Entry View'

Code for Query Report as additional field

I need a field in query report which has a simple join of VBUK & LIKP.
Can't increase join of LIPS as the report changes to item level which I don't want.
My additional field formula will be VBAP-NETPR X LIPS-LFIMG
Where
VBAP-VBELN = LIPS-VBELV &
VBAP-POSNR = LIPS-POSNV
Again where
LIPS-VBELN = VBUK-VBELN
Simply to say, my query build to generate Delivery Report which billing not complete. And within that report I want to bring Sales Order Rate * Delivery Qty.

Dear Sir (Mr.J.R.Kavala),
I'm really appreciate your effort and thanks for your reply. The report almost done with your coding, but may be it is my fault that I couldn't clearly elaborate what I exactly I wanted.
According to your code the result brings only 1st lines result ($ 1,500) from LIPS, but the result should be sum up for all the line item instead, that is ($ 25,750). I've tried to make the scenario below for your understand.
So where should I change the coding if you please advice. Many thanks again in advance.
Zaied
====

LX01 report additional field- MRP controller

Similar Messages

Maybe you are looking for