LX26, Quant for storage bin can not be counted

T code LX26 , executed for a WH/storage Type .The report displays some bins as Ready/Blocked or Overdue /Blocked and when trying to activate those for counting the error message flashes -
Quant for storage Types XXX can not be counted .
How can I unblock these bins and activate for cycle counting.Please help

you must not have any open TO for this quant
the quant must have a positive quantity, negative quants cannot be counted
make sure that this quant is not included in any other still open count

Similar Messages

  • Inventory in storage bins should not be allowed to go negative

    Hi
    Inventory in storage bins should not be allowed to go negative?
    Regards
    Vivek

    you can uncheck the "Allow negative stock" for the combination of warehouse and the storage type.
    Path is-
    SPRO > Logistics execution > Warehouse management > Stock removal startegies.
    Then select your strategy.
    Check out if it helps.
    Regards,
    nilesh

  • Storage bin are not found

    Hi Gurus,
    Could you please help me for my query. We are doing Outbound deliveries for Stock transport orders and we TOs are creating
    through VL06O. and some time we are using LT01 to move the material form bin to bin and while confirming the TO system is
    giving the error, storage bins are not found but bins are there.and what is the reason for this and how to resolve this.
    2. One more Query:
    What is the use of LT10 (As i know it is for the bin to bin transfer).
    but we have LT01, here also we can transfer bin to bin. what is the main difference. Plz explain
    I will appriciate your help.
    thnx
    raghu

    Hi
    Find below the answer of your Q
    1) Check the storage type defined into the WM1 view for the same material. Check the availability of bins in the same storage type
        if both are matching then check the weight parameter of the storage bin and the pallet which you are planning to move into the 
        Bins
    2) LT01 is for single line item whereas LT10 is for collective processing
    Regards
    Manish

  • How can I get itunes to download on my PC. I just got an ipod classic for Christmas and can not get Itunes to download. Website goes to downloaded page but i never get a downloading popup. I even turned off my popup blocker.

    How can I get itunes to download on my PC. I just got an ipod classic for Christmas and can not get Itunes to download. Website goes to downloaded page but i never get a downloading popup. I even turned off my popup blocker.

    Make an appointment at the genius bar.
    If you went without an appointment, then it would make sense that you could be turned away.

  • The condition record for use B can not be displayed

    Hi gururs,
    What does this message (number : VE896 ) mean ?
    How to make it desapear ?
    P.S : it's about output type for purchase orders.
    This message is displayed when I click on : "Goto -> Determi analysis" in tcode ME22N.
    Regards,
    Bahia.

    Hi
    It means you are trying to veiw the executed condition record. System found the condition record for entered transactional data which you cannot see by clicking on it (when you see green record in condition analysis).
    For given condition type -> and access sequence/ access - system shows the condition record that is determined. You can see its details by clicking the access which shows the message that condition record has been found with its determined parameters.
    Ex: For batch determination I have set up one search strategy with a condition type (with access sequence). I created one condition record. When creating say sales order -batch determination takes place based on condition record parameters. System shows a green light for determined condition record. You cannot see its details - if you try to see then system issues a message like ''The condition record for use B can not be displayed''. If you want to see click on its immediate predecessor (access ).
    Thanks

  • HT1933 My computer no longer plays some purchases because it says my computer is not authorised but it is but now Itunes say the cd is no longer available at the store, so I have paid for something but can not no play it.

    My computer no longer plays some purchases because it says my computer is not authorised but it is, but now Itunes say the cd is no longer available at the store, so I have paid for something but can not no play it.

    Hi and welcome to the WD community.
    Try to see if perhaps you are connecting the drive to a surge protector and it might not be getting enough power, try to connect the adapter directly to a power outlet on the wall to see if you get a different result.

  • I ask for help, I can not cancel a monthly subscription to Adobe! contrary to the tutorial does not appear  scribed CANCEL PLAN on my page management plan, is not worse than any serial number of my subscription, where is it? how can I cancel monthly charg

    I ask for help, I can not cancel a monthly subscription to Adobe.
    contrary to the tutorial does not appear scribed "CANCEL PLAN" on my page management plan, is not worse than any serial number of my subscription, where is it? how can I cancel monthly charge? 

    Just to clarify: This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
    Have you done a Forum search?
    How can I delete my account? There is no "cancel plan" in my creative cloud free membership.
    Contact Customer Care

  • The function "containsIgnoreCase" for prefix "fn" can not be found in the specified tag library.

    Hi All,
    I am getting this error on my jsff
    The function "containsIgnoreCase" for prefix "fn" can not be found in the specified tag library.
    jsff includes -
         <jsp:root   xmlns:f="http://java.sun.com/jsf/core"
              xmlns:fn="http://java.sun.com/jsp/jstl/functions"
              xmlns:c="http://java.sun.com/jsp/jstl/core">
    Error at this line -    <af:inputListOfValues
                                                      disabled="#{fn:containsIgnoreCase(bindings.Items.attributeValue,'XYZ')}" >
    Is it Library file issue ? I have already added JSTL1.2.

    Hi Frank,
    I have imported the same directly by code.
    I am facing this issue on one of my system, but the same code is working fine in my other systems. I have tried re-insatlling jdev and importing all the files.
    But still facing the same issue.. This might be some jdev issue in specific system ?
    Please let me know if anything i need to add .

  • HT4623 popup 'photo stream' has appeared & not allowing it to open & blocked my ipad mini. it says photos for iCloud account can not be assessed. review your account information in settings. IGNORE & SETTINGS ARE NO WORKING

    popup 'photo stream' has appeared & not allowing it to open & blocked my ipad mini. it says photos for iCloud account can not be assessed. review your account information in settings. IGNORE & SETTINGS are not working

    Try this now.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • How do i change my security question? I tried to buy music on itunes and it asked for verification i can not answer the security questions correctly

    How do i change my security question? I tried to buy music on itunes and it asked for verification i can not answer the security questions correctly...

    Reset Security Questions
    Frequently asked questions about Apple ID
    Manage My Apple ID
    Or you can email iTunes Support at iTunes Store Support.
    If all else fails:
      1. Go to: Apple Express Lane;
      2. Under Product Categories choose iTunes;
      3. Then choose iTunes Store;
      4. Then choose Account Management;
      5. Now choose iTunes Store Security and answer the bullet questions, then click
          Continue;
      6. Sign in with your Apple ID and press Continue;
      7. Under Contact Options fill out the information and advise iTunes that you would
          like your security/challenge questions reset;
      8. Click Send/Continue.
    You should get a response within 24 hours by email.
    In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
    Another user had success doing the following:
    I got some help from an apple assistant on the phone. It is kind of round about way to get in.
    Here is what he said to do and it is working for me...
      a. on the device that is asking you for the security questions go to "settings", > "store" >
          tap the Apple ID and choose view"Apple ID" and sign in.
      b. Tap on payment information and add a credit/debit card of your preference then select
          "done", in the upper right corner
      c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
          Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
          should be asked to verify your security code for the credit /debit card and NOT the
          security questions.
      d. At this time you can remove the card by going back in to edit the payment info and
          selecting "none" as the card type then saving the changes by selecting "done". You
          should now be able to use your iTunes store credit without answering the security
          questions.
    It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
    Good Luck friends!

  • My iPhone 4 I can not activate and when you try to give me a message for activation activation can not now try later

    my iPhone 4 I can not activate and when you try to give me a message for activation activation can not now try later

    What is the exact wording of the error message?
    Is there a sim in the iPhone?
    Has the iPhone been jailbroken or modified to work with
    other than the original wireless provider?
    Did you recently restore the iPhone or update the iOS version?
    What cellular provider in which country are you attempting to use
    the iPhone with?

  • HT3887 I am trying to  pair my iphone 4 to my 2011 Kluger KX-R.  I have turned bluetooth on my phone but it keeps searching for devices and can not find any.  My computer can find my phone but my phone can not find my computer.

    I am trying to pair my phone to my 2011 Toyota kluger KX-R.  I have turned bluetooth on my phone but it keeps searching for devices and can not find any, including my computer.

    No worries. Often after iTunes updates you have to reconnect your device in order for iTunes to see it. Happens to me all the time!

  • Greetings. Software is not working for me. Can not go to your heath.

    Greetings. Software is not working for me. Can not go to your heath.

    You will need to explain in more detail the problem you're attempting to solve. Since your command of English appears to be perhaps less than fluent, you may want to try posting your question in your native language.
    Regards.

  • Issue :Storage bin is not trigger in TO

    HI
      I have totally two storage bin, i did PO- GRN, iam trying to do trasfer order . but system is not trigger storage bin during the
    transfer order
    1) how many  storage bin required for creating transfer order.
    2) iam trying to manage stock in one storage bin ,is it possible ?
    with regards
    dinesh

    Hi,
    yes, you can use one storage bin till u don't have mention capacity of bin.
    WM bin search strategy
    Storage Bin Search Strategy is failing
    http://help.sap.com/saphelp_470/helpdata/en/c6/f83fe54afa11d182b90000e829fbfe/content.htm
    Kuber

  • Storage bin does not exist error when during transfer posting in MB1B

    Hello All,
    I am getting the error message "  Storage bin [WH no, Storage type] does not exist Check your entry"  during transfer posting in MB1B from one storage location  to another for ex 0007 to 0001. But i can able to do transfer posting from 0001 to 0007 without any error.
    Please provide your solutions/suggestions
    Thanks
    Benny

    Benny Sampath wrote:
    Here is the error message "Storage bin 56A 870  does not exist (check your entry)"
    >
    > Thanks
    > Benny
    I can only see 2 values instead of the expected 3.
    what is 56A ? is it bin, warehouse or storage type?
    what is 870 ? is it bin, warehouse or storage type?
    one variable that is need  to have a hit in table LAGP is missing, hence you get this error.
    you have to find out why this variable is missing.
    But there is a wide area to look. Hence you should first answer the questions, as this would limit the options where to look.

Maybe you are looking for