LXDE - use Gnome volume control

I started using LXDE coming from Gnome.  I loved how I could control the volume on my speakers via the external buttons on my laptop like I did in Gnome.  After applying the LXDE panel applet, it won't adjust my volume with the buttons.  Only while dragging it's slider.
Anyone know how to use gnome's volume set?  I am already using the gnome-power-manager.

You could try installing xbindkeys http://wiki.archlinux.org/index.php/Xbindkeys  if it recognizes your external buttons then you can bind them to amixer's master volume

Similar Messages

  • Gnome-volume-control won't start

    Hello all,
    Since last update I can not start gnome-volume-control:
    [romain@arch ~]$ gnome-volume-control
    ERROR:misc.c:52:get_page_num: code should not be reached
    Abandon
    Am I the only to have the problem? How to solve it?
    Regards,
    Kab

    Whoa! Finally someone is having the same problem as I. Unfortunately I have no solution for it
    I'm using OSS since I hade trouble getting the sound to work with ALSA, maybe that is a part of the problem.
    Last edited by tsvensson (2009-09-17 19:49:05)

  • Gnome Volume Control

    Im having problems with changing the volume of any of outputs PCM, master. When I wan't to scroll up on Volume control applet and Volume Control Aplication gnome-volume-control Left chanel always drops to 0 and than slowly rises with a lot of jumps up and down. This jumping exists if I grab slider to. So...
    Its really anoying cause when using scroll whell on applet I have to scrool many times to get max volume if starting volume vas even 70%.
    So question ofcourse is how to fix this left chanell jumping.
    BTW I now use GNOME 2.24 but this was present in 2.22 to.
    BTW when I was using Ubuntu this problem didn't occur. So its gnome+arch problem.
    Last edited by christooss (2008-10-22 21:32:27)

    And to me too.
    The sound chip sucks anyway: CM6501, module snd-usb-audio.
    Seems like multi-channel controllers are the culprit:
    Simple mixer control 'Speaker',1
    Capabilities: pvolume pswitch pswitch-joined
    Playback channels: Front Left - Front Right - Rear Left - Rear Right - Front Center - Woofer - Side Left - Side Right
    (from amixer)

  • Gnome Volume Control High CPU Usage

    I have an interesting problem.
    When I boot into Arch, my CPU usage is farly low. Jumping around 0 - 10% or so.
    But as soon as I open up Gnomes Volume Control window. Cpu usage jumps up to 50 - 60% and stays there, No matter if the windows open or not.
    My front channel is also at 0% on boot, so I normally go into the Volume Control to bring that up.
    I noticed using alsamixer in the terminal will prevent the cpu usage from going so high. But if I open Gnome's Volume Manager, I have to log out, and log back in to get cpu usage back to normal. Is there anyway to avoid this or fix this issue?

    This seems to be a known bug. http://www.google.com/search?hl=en&q=gn … h&aq=f&oq=

  • I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

    1. HP Pavilion dm4 XO132AV
    2. Windows 7 64-bit
    3. No error message
    4. No changes were made prior to when the issue occured
    5. Question: I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp50501-51000/sp50856.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, restart the notebook and let Windows fully load.  Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to use itunes volume control in mainstage

    Hi everyone!
    I want use itunes volume control in mainstage (by slider or something). Can someone help me?

    You would need to write an Applescript (there are some already under Parameter Mapping>Actions>Applescript). Check online at "dougscripts.com/itunes/itinfo/eqandvolume.php" for some scripts for changing iTunes volume. You will need to put the Applescript in the same folder the other Mainstage Applescripts are in (drive>Library>Application Support>Logic>Mainstage Scripts). I haven't tried this myself, but why not give it a go?

  • Gnome volume control applet is off screen

    Any idea on how to fix this? I have been gone from gnome for a while. Last time I was here the volume control applet slider was vertical. Now that it is horizontal, it exits screen right when it is on the right hand edge of the panel. (For those of you on links/lynx/elinks who cant see my pretty picture)
    Last edited by lungdart (2010-10-09 04:34:00)

    I only have one screen. But it is a laptop with the capability to run 2 screens.
    Also I am using the nvidia drivers.
    [lungdart@myhost ~]$ xrandr
    xrandr: Failed to get size of gamma for output default
    Screen 0: minimum 320 x 240, current 1920 x 1200, maximum 1920 x 1200
    default connected 1920x1200+0+0 0mm x 0mm
    1920x1200 50.0*
    1600x1200 51.0
    1400x1050 52.0
    1280x1024 53.0
    1280x960 54.0
    1024x768 55.0
    800x600 56.0 57.0
    640x512 58.0
    640x480 59.0 60.0
    512x384 61.0
    400x300 62.0
    320x240 63.0
    [lungdart@myhost ~]$
    EDIT: Using gnome 2.32.0, I have had this same problem on my desktop before I pooched it, but never got around to figuring it out.
    Last edited by lungdart (2010-10-09 15:33:51)

  • Gnome volume control 'jumping'

    Hello,
    When I try to control the volume in either Volume Control 2.22.0 or in the Volume Control panel applet in Gnome the volume 'jumps'. What I mean by this is when I try to move the slider slightly it behaves abnormally and 'jumps' around from muted, unmuted, or anywhere inbetween (sorry, not sure how else to explain it). If instead I use alsamixer instead to control the sound, the volume moves up/down without a problem. I'm using Alsa version 1.0.16 from www.alsa-project.org.

    same problem here. I noticed it the moment i restarted after upgradinig to 2.6.25 Kernel. What happens is (at least for me) the following [assume the volume is being 'increased' using Keyboard or GUI control.
    ->Vol at 40%
    ->Vol at 41%
    ->Vol at 42%... until
    ->Vol at 0%
    ->L at 1% R at 0%
    ->I go to Control app and notice for some reason L and R channels are now unlinked. So i link them back but i cant seem to get the volume up with it linked, the moment i do it goes back to about 0% for both and unlinks. So i moved them seperatley, it worked i have both at 50%, so i felt clever and linked it so i can use keyboard for control, and it went back to unlink+0%ish.
    And so on and so forth. U get this is a repeated loop. Once i use alsamixer in console (if channels are unlinked i find they are different volumes so i jst put them back together by maxing both, and now they are linked again) from then on i can change volume using alsamixer OR mplayer for instance (since volume control for mplayer is tied into the PCM volume (NOT Master)) in my case. Of course if i set 3D to post rather than pre PCM volume control becomes useless as always, so mplayer volume control does nothing but mere show. I jst have alsa on Vc/2 so i switch to it when i want to. It is ANNOYING can someone please help.
    -Tj

  • I don't understand how to use the volume control on the new iphone headphones

    I just bought the new style earphones for my iphone and it has a new volume control -- how does it work?  On the old one you just pushed up or down for volume control but now it just increases volume for the time you hold it down?  Does anyone know how to use this properly?

    I have had good success with the System Font Panel. Now all of a sudden, I only get part of it. Any suggestions on how to restore the entire panel? There are no change size options in the corners like in some dialog boxes. I was going to paste what I have here, but for some reason, paste is not available.

  • Gnome volume control applet keeps disappearing

    Every now and then volume control applet disappears from panel. When I add it again to the panel and log out / log in, there are two of them. I couldn't find any clue on the internet about this issue. Has anybody experienced this problem with gnome? I have gnome 2.28.2.

    siriusb wrote:Every now and then volume control applet disappears from panel. When I add it again to the panel and log out / log in, there are two of them. I couldn't find any clue on the internet about this issue. Has anybody experienced this problem with gnome? I have gnome 2.28.2.
    Do you block the panels objects for avoid to move?
    Otherside, the panel object run in background or not?

  • IPad2 No Sound  (7.0.4) even after Reset, YES I have tried using volume controls!, iPad2 No Sound  (7.0.4) even after Reset, YES I have tried using volume controls!

    I have an iPad2 that has recently been updated with 7.0.4. After turning off my iPad, I lost all audio from the iPad. Speakers work because when in Setting>Sounds> the ringer options work. YES, I have tried using the volume controls. But now the volume controls only control the ringer options.
    I have changed the option under settings for the lock out to mute and back to lock out.
    I have reset all setting
    I have turned off and on
    I have done are hard reset (holding the 2 buttons down).
    I have erased everything and started all over reset.
    I still have now sound from my iPad. Again the speakers work, when I go to sound under setting and play with the volume of the ringer it plays the sound.
    Why is my controls now only for a ringer after the UPDATE. Is my iPad2 a paper weight?

    Alright I have made some progress. I used compressed air and then rubbing alcohol to clean contacts. I first powered off the iPad2 and cleaned with air. Then I used the new toothbrush and rubbing alcohol to clean the contacts (really not sure how that works, but I will try anything at this point). Twice the ipad turned on when cleaning contacts.
    Outcome I now get sound from typing on the ipad like the typewriter sound. I did not have that before, but still no audio from apps or youtube, or anything else.

  • Volume control when using front row with an external audio interface

    Hi,
    I got my macbook last week, and so far, I love it. But I've got a small gripe with FrontRow - in my room at college, I have my macbook plugged into an oldish Tascam US-122, which I use a lot for recording. The Tascam is connected to my expensive active speakers, and ideally, I'd like to be able to play back via FrontRow to the Tascam, to the speakers, while retaining remote control. This isn't a problem for selecting Photos/Videos/Music etc, but the problem arises when I want to change the volume - the remote simply controls the volume of the macbook's internal speakers, not affecting the output of the Tascam.
    I know I could just connect the speakers via the headphone output, but that would mean more cables, and more chopping and changing system preferences to suit whether I'm making music or just listening.
    *So - is there any way at all that I can make the macbook's global volume control (using the volume hotkeys and remote) affect the signal its sending (via USB) to the Tascam?* I know its not impossible, because until recently I used it with a PC running XP, and that allowed me to use the volume control app to boost or cut the Tascam's volume. Perhaps its an issue with the Tascam's OSX driver?
    The Tascam has its own physical volume knob, so its not like I'm stuck listening at deafening or very quiet volumes, and I know this sounds like an issue with my laziness rather than FrontRow or the macbook, but surely it defeats the point of FrontRow if I have to walk across the room every time I want to turn the tunes up or down?!
    Any help would be much appreciated!
    Cheers,
    Thom Bishop

    hmm, yeah, thats kinda what i suspected - i reckon this is to do with the way the frontrow interface is set up, but theres no way (as far as i can see) to make everything pass through the main system stereo channel BEFORE going to an external audio interface... which is COMPLETELY bizarre, since system sounds/alerts get passed to the audio interface fine.
    and no, i very much doubt whether ANY external audio interface would respond to apple remote (gap in the market, perhaps?).
    this would be a fairly simple problem to solve, if only apple were aware of it... of course, i COULD try getting to grips with audio units and seeing if i couldnt fix it myself, but ive frankly not got the time to learn how that works! how can i make apple aware of this issue?? are they already aware??

  • [Solved] No sound (using Gnome with Pulseaudio)

    Hello,
    I have an issue with my audio. Since yesterday it has not been working, as in no sound in my headphones
    I updated gnome, cinnamon and linux yesterday. I did not however update pulseaudio or anything else alsa related (as far as I can tell).
    Another possible cause could be switching from cinnamon to gnome which I did yesterday (I don't know when exactly my audio stopped working).
    Other relevant facts:
    -My mic is still working fine
    -Using the Xonar DG sound card
    -Nothing is muted in alsamixer
    -not a hardware issue, working fine in dual boot windows
    Pulse audio in verbose mode suggest that the issue is not pulseaudio (as does pavucontrol's visualization):
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    I: [pulseaudio] core-util.c: Successfully gained nice level -11.
    I: [pulseaudio] main.c: This is PulseAudio 5.0
    I: [pulseaudio] main.c: Page size is 4096 bytes
    I: [pulseaudio] main.c: Machine ID is 16327981f21a4906af3310ebf24dab15.
    I: [pulseaudio] main.c: Session ID is c1.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
    I: [pulseaudio] main.c: Using state directory /home/username/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 MMXEXT
    I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/username/.config/pulse/16327981f21a4906af3310ebf24dab15-device-volumes'.
    I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/username/.config/pulse/16327981f21a4906af3310ebf24dab15-stream-volumes'.
    I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/username/.config/pulse/16327981f21a4906af3310ebf24dab15-card-database'.
    I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA NVidia/HDA NVidia.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA NVidia
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA NVidia use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA NVidia
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,2
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,2: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,2
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,2: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,3
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,3: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,3
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,3: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_01_00.1.
    I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_01_00.1"
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:0.
    I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
    I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
    I: [pulseaudio] sink.c: device.api = "alsa"
    I: [pulseaudio] sink.c: device.class = "sound"
    I: [pulseaudio] sink.c: alsa.class = "generic"
    I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.subdevice = "0"
    I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] sink.c: alsa.device = "3"
    I: [pulseaudio] sink.c: alsa.card = "0"
    I: [pulseaudio] sink.c: alsa.card_name = "HDA NVidia"
    I: [pulseaudio] sink.c: alsa.long_card_name = "HDA NVidia at 0xfeaf8000 irq 19"
    I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
    I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
    I: [pulseaudio] sink.c: device.bus = "pci"
    I: [pulseaudio] sink.c: device.vendor.id = "10de"
    I: [pulseaudio] sink.c: device.vendor.name = "NVIDIA Corporation"
    I: [pulseaudio] sink.c: device.product.id = "0e0a"
    I: [pulseaudio] sink.c: device.product.name = "GK104 HDMI Audio Controller"
    I: [pulseaudio] sink.c: device.string = "hdmi:0"
    I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
    I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
    I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
    I: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
    I: [pulseaudio] sink.c: device.description = "GK104 HDMI Audio Controller Digital Stereo (HDMI)"
    I: [pulseaudio] sink.c: alsa.mixer_name = "Nvidia GPU 40 HDMI/DP"
    I: [pulseaudio] sink.c: alsa.components = "HDA:10de0040,14622843,00100100"
    I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of GK104 HDMI Audio Controller Digital Stereo (HDMI)"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: alsa.card = "0"
    I: [pulseaudio] source.c: alsa.card_name = "HDA NVidia"
    I: [pulseaudio] source.c: alsa.long_card_name = "HDA NVidia at 0xfeaf8000 irq 19"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:01:00.1"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
    I: [pulseaudio] source.c: device.bus = "pci"
    I: [pulseaudio] source.c: device.vendor.id = "10de"
    I: [pulseaudio] source.c: device.vendor.name = "NVIDIA Corporation"
    I: [pulseaudio] source.c: device.product.id = "0e0a"
    I: [pulseaudio] source.c: device.product.name = "GK104 HDMI Audio Controller"
    I: [pulseaudio] source.c: device.string = "0"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
    I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
    I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
    I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
    I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
    I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="0" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
    I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0 (alsa_card.pci-0000_01_00.1) module loaded.
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/Xonar DG/Xonar DG.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card Xonar DG
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import Xonar DG use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card Xonar DG
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL iec958:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer iec958:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround40:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround40:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround41:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround41:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround50:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround50:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround51:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround51:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround71:1: Invalid argument
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL iec958:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer iec958:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.CMI8786.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1: No such file or directory
    I: [pulseaudio] module-card-restore.c: Restored profile 'output:analog-stereo+input:analog-stereo' for card alsa_card.pci-0000_03_07.0.
    I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_03_07.0.
    I: [pulseaudio] card.c: Created 1 "alsa_card.pci-0000_03_07.0"
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-sink.c: Successfully opened device front:1.
    I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
    I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] sink.c: Created sink 1 "alsa_output.pci-0000_03_07.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
    I: [pulseaudio] sink.c: device.api = "alsa"
    I: [pulseaudio] sink.c: device.class = "sound"
    I: [pulseaudio] sink.c: alsa.class = "generic"
    I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] sink.c: alsa.name = "Multichannel"
    I: [pulseaudio] sink.c: alsa.id = "Multichannel"
    I: [pulseaudio] sink.c: alsa.subdevice = "0"
    I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] sink.c: alsa.device = "0"
    I: [pulseaudio] sink.c: alsa.card = "1"
    I: [pulseaudio] sink.c: alsa.card_name = "Xonar DG"
    I: [pulseaudio] sink.c: alsa.long_card_name = "C-Media Oxygen HD Audio at 0xe800, irq 22"
    I: [pulseaudio] sink.c: alsa.driver_name = "snd_oxygen"
    I: [pulseaudio] sink.c: device.bus_path = "pci-0000:03:07.0"
    I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1"
    I: [pulseaudio] sink.c: device.bus = "pci"
    I: [pulseaudio] sink.c: device.vendor.id = "13f6"
    I: [pulseaudio] sink.c: device.vendor.name = "C-Media Electronics Inc"
    I: [pulseaudio] sink.c: device.product.id = "8788"
    I: [pulseaudio] sink.c: device.product.name = "CMI8786 (Xonar DG)"
    I: [pulseaudio] sink.c: device.string = "front:1"
    I: [pulseaudio] sink.c: device.buffering.buffer_size = "352800"
    I: [pulseaudio] sink.c: device.buffering.fragment_size = "352800"
    I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] sink.c: device.profile.name = "analog-stereo"
    I: [pulseaudio] sink.c: device.profile.description = "Analog Stereo"
    I: [pulseaudio] sink.c: device.description = "CMI8786 (Xonar DG) Analog Stereo"
    I: [pulseaudio] sink.c: alsa.mixer_name = "CMI8786"
    I: [pulseaudio] sink.c: alsa.components = "CS4245 CMI8786"
    I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] source.c: Created source 1 "alsa_output.pci-0000_03_07.0.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of CMI8786 (Xonar DG) Analog Stereo"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: alsa.card = "1"
    I: [pulseaudio] source.c: alsa.card_name = "Xonar DG"
    I: [pulseaudio] source.c: alsa.long_card_name = "C-Media Oxygen HD Audio at 0xe800, irq 22"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_oxygen"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:03:07.0"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1"
    I: [pulseaudio] source.c: device.bus = "pci"
    I: [pulseaudio] source.c: device.vendor.id = "13f6"
    I: [pulseaudio] source.c: device.vendor.name = "C-Media Electronics Inc"
    I: [pulseaudio] source.c: device.product.id = "8788"
    I: [pulseaudio] source.c: device.product.name = "CMI8786 (Xonar DG)"
    I: [pulseaudio] source.c: device.string = "1"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] alsa-sink.c: Using 1.0 fragments of size 352800 bytes (2000.00ms), buffer size is 352800 bytes (2000.00ms)
    I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
    I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
    I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -125.50 dB to 0.00 dB.
    I: [pulseaudio] alsa-sink.c: Fixing base volume to 0.00 dB
    I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
    I: [pulseaudio] alsa-sink.c: Using hardware mute control.
    I: [alsa-sink-Multichannel] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-sink-Multichannel] alsa-sink.c: Starting playback.
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-source.c: Successfully opened device front:1.
    I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
    I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] source.c: Created source 2 "alsa_input.pci-0000_03_07.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: alsa.resolution_bits = "16"
    I: [pulseaudio] source.c: device.api = "alsa"
    I: [pulseaudio] source.c: device.class = "sound"
    I: [pulseaudio] source.c: alsa.class = "generic"
    I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] source.c: alsa.name = "Multichannel"
    I: [pulseaudio] source.c: alsa.id = "Multichannel"
    I: [pulseaudio] source.c: alsa.subdevice = "0"
    I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] source.c: alsa.device = "0"
    I: [pulseaudio] source.c: alsa.card = "1"
    I: [pulseaudio] source.c: alsa.card_name = "Xonar DG"
    I: [pulseaudio] source.c: alsa.long_card_name = "C-Media Oxygen HD Audio at 0xe800, irq 22"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_oxygen"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:03:07.0"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1"
    I: [pulseaudio] source.c: device.bus = "pci"
    I: [pulseaudio] source.c: device.vendor.id = "13f6"
    I: [pulseaudio] source.c: device.vendor.name = "C-Media Electronics Inc"
    I: [pulseaudio] source.c: device.product.id = "8788"
    I: [pulseaudio] source.c: device.product.name = "CMI8786 (Xonar DG)"
    I: [pulseaudio] source.c: device.string = "front:1"
    I: [pulseaudio] source.c: device.buffering.buffer_size = "131072"
    I: [pulseaudio] source.c: device.buffering.fragment_size = "131072"
    I: [pulseaudio] source.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] source.c: device.profile.name = "analog-stereo"
    I: [pulseaudio] source.c: device.profile.description = "Analog Stereo"
    I: [pulseaudio] source.c: device.description = "CMI8786 (Xonar DG) Analog Stereo"
    I: [pulseaudio] source.c: alsa.mixer_name = "CMI8786"
    I: [pulseaudio] source.c: alsa.components = "CS4245 CMI8786"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] alsa-source.c: Using 1.0 fragments of size 131072 bytes (743.04ms), buffer size is 131072 bytes (743.04ms)
    I: [pulseaudio] alsa-source.c: Time scheduling watermark is 20.00ms
    I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
    I: [pulseaudio] alsa-source.c: Hardware volume ranges from -12.00 dB to 12.00 dB.
    I: [pulseaudio] alsa-source.c: Fixing base volume to -12.00 dB
    I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
    I: [pulseaudio] alsa-source.c: Using hardware mute control.
    I: [alsa-source-Multichannel] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-source-Multichannel] alsa-source.c: Starting capture.
    I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #7; argument: "device_id="1" name="pci-0000_03_07.0" card_name="alsa_card.pci-0000_03_07.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
    I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1 (alsa_card.pci-0000_03_07.0) module loaded.
    I: [pulseaudio] module-udev-detect.c: Found 2 cards.
    I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
    I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #8; argument: "channels=2").
    I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #9; argument: "").
    I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #11; argument: "").
    I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #10; argument: "").
    I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #12; argument: "").
    I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #13; argument: "").
    I: [pulseaudio] module.c: Loaded "module-gconf" (index: #14; argument: "").
    I: [pulseaudio] module-default-device-restore.c: Restored default sink 'alsa_output.pci-0000_03_07.0.analog-stereo'.
    I: [pulseaudio] module-default-device-restore.c: Restored default source 'alsa_input.pci-0000_03_07.0.analog-stereo'.
    I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #15; argument: "").
    I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #16; argument: "").
    I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #17; argument: "").
    I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #18; argument: "").
    I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #19; argument: "").
    I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #20; argument: "").
    I: [pulseaudio] client.c: Created 0 "Login Session c1"
    I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #21; argument: "").
    I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #22; argument: "").
    I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #23; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #24; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #25; argument: "").
    I: [pulseaudio] main.c: Daemon startup complete.
    I: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
    E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory.
    I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    I: [pulseaudio] source-output.c: Trying to change sample rate
    I: [pulseaudio] remap.c: Using generic matrix remapping
    I: [pulseaudio] source-output.c: Created output 0 "Peak detect" on alsa_input.pci-0000_03_07.0.analog-stereo with sample spec float32le 1ch 25Hz and channel map mono
    I: [pulseaudio] source-output.c: application.id = "org.gnome.VolumeControl"
    I: [pulseaudio] source-output.c: media.name = "Peak detect"
    I: [pulseaudio] source-output.c: application.name = "GNOME Volume Control Dialog"
    I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
    I: [pulseaudio] source-output.c: native-protocol.version = "29"
    I: [pulseaudio] source-output.c: application.icon_name = "multimedia-volume-control"
    I: [pulseaudio] source-output.c: application.version = "3.12.1"
    I: [pulseaudio] source-output.c: application.process.id = "2090"
    I: [pulseaudio] source-output.c: application.process.user = "username"
    I: [pulseaudio] source-output.c: application.process.host = "gimli"
    I: [pulseaudio] source-output.c: application.process.binary = "gnome-control-center"
    I: [pulseaudio] source-output.c: application.language = "en_US.UTF-8"
    I: [pulseaudio] source-output.c: window.x11.display = ":0.0"
    I: [pulseaudio] source-output.c: application.process.machine_id = "16327981f21a4906af3310ebf24dab15"
    I: [pulseaudio] source-output.c: application.process.session_id = "c1"
    I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.gnome.VolumeControl"
    I: [pulseaudio] protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
    I: [alsa-source-Multichannel] alsa-source.c: Increasing minimal latency to 1.00 ms
    I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_03_07.0.analog-stereo idle for too long, suspending ...
    I: [alsa-sink-Multichannel] alsa-sink.c: Device suspended...
    I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_01_00.1.hdmi-stereo idle for too long, suspending ...
    I: [alsa-sink-HDMI 0] alsa-sink.c: Device suspended...
    I: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
    I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    I: [pulseaudio] sink-input.c: Trying to change sample rate
    I: [pulseaudio] alsa-sink.c: Updating rate for device front:1, new rate is 48000
    I: [pulseaudio] source.c: Changed sampling rate successfully
    I: [pulseaudio] sink.c: Changed sampling rate successfully
    I: [pulseaudio] sink-input.c: Rate changed to 48000 Hz
    I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-media-role:test.
    I: [alsa-sink-Multichannel] alsa-sink.c: Trying resume...
    I: [alsa-sink-Multichannel] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    I: [alsa-sink-Multichannel] alsa-util.c: ALSA period wakeups disabled
    I: [alsa-sink-Multichannel] alsa-sink.c: Time scheduling watermark is 18.38ms
    I: [alsa-sink-Multichannel] alsa-sink.c: Resumed successfully...
    I: [alsa-sink-Multichannel] alsa-sink.c: Starting playback.
    I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
    I: [pulseaudio] remap.c: Using generic matrix remapping
    I: [pulseaudio] sink-input.c: Created input 0 "Front Right" on alsa_output.pci-0000_03_07.0.analog-stereo with sample spec s16le 1ch 48000Hz and channel map front-right
    I: [pulseaudio] sink-input.c: event.id = "audio-channel-front-right"
    I: [pulseaudio] sink-input.c: media.name = "Front Right"
    I: [pulseaudio] sink-input.c: media.role = "test"
    I: [pulseaudio] sink-input.c: media.filename = "/usr/share/sounds/freedesktop/stereo/audio-channel-front-right.oga"
    I: [pulseaudio] sink-input.c: application.name = "libcanberra"
    I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
    I: [pulseaudio] sink-input.c: native-protocol.version = "29"
    I: [pulseaudio] sink-input.c: application.id = "org.gnome.VolumeControl"
    I: [pulseaudio] sink-input.c: application.version = "0.30"
    I: [pulseaudio] sink-input.c: application.process.id = "2090"
    I: [pulseaudio] sink-input.c: application.process.user = "username"
    I: [pulseaudio] sink-input.c: application.process.host = "gimli"
    I: [pulseaudio] sink-input.c: application.process.binary = "gnome-control-center"
    I: [pulseaudio] sink-input.c: application.icon_name = "multimedia-volume-control"
    I: [pulseaudio] sink-input.c: application.language = "en_US.UTF-8"
    I: [pulseaudio] sink-input.c: window.x11.display = ":0.0"
    I: [pulseaudio] sink-input.c: application.process.machine_id = "16327981f21a4906af3310ebf24dab15"
    I: [pulseaudio] sink-input.c: application.process.session_id = "c1"
    I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:test"
    I: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
    I: [pulseaudio] protocol-native.c: Final latency 3837.50 ms = 1960.00 ms + 2*20.00 ms + 1837.50 ms
    I: [pulseaudio] sink-input.c: Freeing input 0 "Front Right"
    I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_03_07.0.analog-stereo idle for too long, suspending ...
    I: [alsa-sink-Multichannel] alsa-sink.c: Device suspended...
    ^CI: [pulseaudio] main.c: Got signal SIGINT.
    I: [pulseaudio] main.c: Exiting.
    I: [pulseaudio] main.c: Daemon shutdown initiated.
    I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #25).
    I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #25).
    I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #24).
    I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #24).
    I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #23).
    I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #23).
    I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #22).
    I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #22).
    I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #21).
    I: [pulseaudio] client.c: Freed 0 "Login Session c1"
    I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #21).
    I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #20).
    I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #20).
    I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #19).
    I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #19).
    I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #18).
    I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #18).
    I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #17).
    I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #17).
    I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #16).
    I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #16).
    I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #15).
    I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #15).
    I: [pulseaudio] module.c: Unloading "module-gconf" (index: #14).
    I: [pulseaudio] module.c: Unloaded "module-gconf" (index: #14).
    I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #13).
    I: [pulseaudio] source-output.c: Freeing output 0 "Peak detect"
    I: [pulseaudio] client.c: Freed 1 "GNOME Volume Control Dialog"
    I: [pulseaudio] client.c: Freed 2 "libcanberra"
    I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #13).
    I: [pulseaudio] module.c: Unloading "module-esound-protocol-unix" (index: #12).
    I: [pulseaudio] module.c: Unloaded "module-esound-protocol-unix" (index: #12).
    I: [pulseaudio] module.c: Unloading "module-bluez5-discover" (index: #11).
    I: [pulseaudio] module.c: Unloaded "module-bluez5-discover" (index: #11).
    I: [pulseaudio] module.c: Unloading "module-bluetooth-discover" (index: #10).
    I: [pulseaudio] module.c: Unloaded "module-bluetooth-discover" (index: #10).
    I: [pulseaudio] module.c: Unloading "module-bluetooth-policy" (index: #9).
    I: [pulseaudio] module.c: Unloaded "module-bluetooth-policy" (index: #9).
    I: [pulseaudio] module.c: Unloading "module-jackdbus-detect" (index: #8).
    I: [pulseaudio] module.c: Unloaded "module-jackdbus-detect" (index: #8).
    I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #7).
    I: [pulseaudio] sink.c: Freeing sink 1 "alsa_output.pci-0000_03_07.0.analog-stereo"
    I: [pulseaudio] source.c: Freeing source 1 "alsa_output.pci-0000_03_07.0.analog-stereo.monitor"
    I: [pulseaudio] source.c: Freeing source 2 "alsa_input.pci-0000_03_07.0.analog-stereo"
    I: [pulseaudio] card.c: Freed 1 "alsa_card.pci-0000_03_07.0"
    I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #7).
    I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6).
    I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo"
    I: [pulseaudio] source.c: Freeing source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor"
    I: [pulseaudio] card.c: Freed 0 "alsa_card.pci-0000_01_00.1"
    I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6).
    I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
    I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
    I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
    I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
    I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
    I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
    I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
    I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
    I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
    I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
    I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
    I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
    I: [pulseaudio] main.c: Daemon terminated.
    aplay -l:
    card 0: DG [Xonar DG], device 0: Multichannel [Multichannel]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: DG [Xonar DG], device 1: Digital [Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    aplay -L :
    null
    Discard all samples (playback) or generate zero samples (capture)
    pulse
    PulseAudio Sound Server
    default
    Default ALSA Output (currently PulseAudio Sound Server)
    sysdefault:CARD=DG
    Xonar DG, Multichannel
    Default Audio Device
    front:CARD=DG,DEV=0
    Xonar DG, Multichannel
    Front speakers
    surround40:CARD=DG,DEV=0
    Xonar DG, Multichannel
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=DG,DEV=0
    Xonar DG, Multichannel
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=DG,DEV=0
    Xonar DG, Multichannel
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=DG,DEV=0
    Xonar DG, Multichannel
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=DG,DEV=0
    Xonar DG, Multichannel
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=DG,DEV=0
    Xonar DG, Multichannel
    IEC958 (S/PDIF) Digital Audio Output
    hdmi:CARD=NVidia,DEV=0
    HDA NVidia, HDMI 0
    HDMI Audio Output
    hdmi:CARD=NVidia,DEV=1
    HDA NVidia, HDMI 1
    HDMI Audio Output
    hdmi:CARD=NVidia,DEV=2
    HDA NVidia, HDMI 2
    HDMI Audio Output
    hdmi:CARD=NVidia,DEV=3
    HDA NVidia, HDMI 3
    HDMI Audio Output
    My best guess at this point is that something(tm) is wrong with alsa. I have no idea how to troubleshoot this though. Any advice?
    Please let me know if anything important is missing.
    Last edited by InfamousBlue (2014-05-02 09:38:49)

    Did you ever have a copy of front channels or a mix of all of them played on the headphone jack with alsa only? I doubt it. If you kill pulseaudio and run following, what channels do you hear from headphones?
    speaker-test -c 8 -t wav -D plughw:DG,0
    This is probably more of a pulseaudio issue, since alsa usually does not copy streams.
    InfamousBlue wrote:I did not however update pulseaudio or anything else alsa related (as far as I can tell).
    Partial upgrades are not supported. There are some remapping examples on the wiki. If you seek a hardware remapping solution try hdajackretask from alsa-tools, it works however for hda compliant cards.
    Last edited by emeres (2014-05-02 07:30:17)

  • Mapping Alsa Volume Control for USB SoundCard (C-Media 650)

    Hello everyone who is interested in helping me solve my volume control problem!
    Lets see, I have sound playback working, currently I am listening to some Foo Fighters mp3s in XMMS using the Alsa plugin, so I can't complain too much.
    However, volume control doesn't work. If I set the alsa plugin to use software volume control, then I have volume control but its not ideal and it doesn't help me when I'm not using xmms. When I run alsamixer or open the gnome volume control, I have multiple volume controls for the "Speaker" device. The 1st pair of volume controls do nothing, I can mute them and my music keeps playing... no idea what they're controlling. The 2nd pair ("Speaker 1") DOES control the sound volume. I just need to find a way to remap it or something so I can configure my applications/tray icon/etc to use it. (And preferabbly not the other 6 channels)
    In the Gnome sound control, the devices are:
    "Speaker" - stereo control that doesn't do anything
    and "Speaker 1" - a 7.1 channel (8 sliders) with the first two controlling front left and right sound for my stereo speakers.
    I've tried setting xmms to use "speaker 1", but the option is not in the drop-box, tried typing it manually but that didnt work.
    I set my tray icon to control "speaker 1" but the sliders don't seem to lock properly and the volume just jumps around, unlocking the channels and not staying balanced or scaling with the slider.
    The only way to get the volume to change as expected is to open the gnome volume manager, make sure the channels of "Speaker 1" are UNLOCKED and slide the first 2 sliders to the desired volume.
    So I was thinking if I could just remap the first two channels of "speaker 1" to something else using an alias or link or editing asound.state (which just confused me) for example, then I could use my alias to control the sound in my applications. Thanks for any help with this!
    Here's some system info that may or may not help:
    AMD Athlon 5400 X2
    Asus M2N-E SLi /w C-Media 650 onboard 8-channel audio CODEC (transfer audio signal over USB bus)
    Fully uptodate Arch Linux 64-bit (pacman -Syu'd this morning)
    aplay -L
    default:CARD=default
    PnP Audio Device , USB Audio
    Default Audio Device
    front:CARD=default,DEV=0
    PnP Audio Device , USB Audio
    Front speakers
    surround40:CARD=default,DEV=0
    PnP Audio Device , USB Audio
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=default,DEV=0
    PnP Audio Device , USB Audio
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=default,DEV=0
    PnP Audio Device , USB Audio
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=default,DEV=0
    PnP Audio Device , USB Audio
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=default,DEV=0
    PnP Audio Device , USB Audio
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=default,DEV=0
    PnP Audio Device , USB Audio
    IEC958 (S/PDIF) Digital Audio Output
    null
    $ cat /proc/asound/devices
    2: : timer
    3: : sequencer
    4: [ 0- 0]: digital audio playback
    5: [ 0- 0]: digital audio capture
    6: [ 0] : control
    asound.state:
    state.default {
    control.1 {
    comment.access 'read write'
    comment.type BOOLEAN
    comment.count 1
    iface MIXER
    name 'Mic Playback Switch'
    value false
    control.2 {
    comment.access 'read write'
    comment.type INTEGER
    comment.count 2
    comment.range '0 - 8065'
    comment.dbmin -2400
    comment.dbmax -2400
    iface MIXER
    name 'Mic Playback Volume'
    value.0 6144
    value.1 6144
    control.3 {
    comment.access 'read write'
    comment.type BOOLEAN
    comment.count 1
    iface MIXER
    name 'CD Playback Switch'
    value true
    control.4 {
    comment.access 'read write'
    comment.type INTEGER
    comment.count 2
    comment.range '0 - 8065'
    comment.dbmin -2400
    comment.dbmax -2400
    iface MIXER
    name 'CD Playback Volume'
    value.0 5575
    value.1 5575
    control.5 {
    comment.access 'read write'
    comment.type BOOLEAN
    comment.count 1
    iface MIXER
    name 'Speaker Playback Switch'
    value false
    control.6 {
    comment.access 'read write'
    comment.type INTEGER
    comment.count 2
    comment.range '0 - 8065'
    comment.dbmin -2400
    comment.dbmax -2400
    iface MIXER
    name 'Speaker Playback Volume'
    value.0 6144
    value.1 6144
    control.7 {
    comment.access 'read write'
    comment.type BOOLEAN
    comment.count 1
    iface MIXER
    name 'Speaker Playback Switch'
    index 1
    value true
    control.8 {
    comment.access 'read write'
    comment.type INTEGER
    comment.count 8
    comment.range '0 - 197'
    comment.dbmin -3693
    comment.dbmax -147
    iface MIXER
    name 'Speaker Playback Volume'
    index 1
    value.0 196
    value.1 196
    value.2 196
    value.3 196
    value.4 196
    value.5 196
    value.6 196
    value.7 196
    control.9 {
    comment.access 'read write'
    comment.type BOOLEAN
    comment.count 1
    iface MIXER
    name 'Mic Capture Switch'
    value true
    control.10 {
    comment.access 'read write'
    comment.type INTEGER
    comment.count 2
    comment.range '0 - 6928'
    comment.dbmin -1600
    comment.dbmax -1600
    iface MIXER
    name 'Mic Capture Volume'
    value.0 4096
    value.1 4096
    control.11 {
    comment.access 'read write'
    comment.type BOOLEAN
    comment.count 1
    iface MIXER
    name 'PCM Capture Switch'
    value true
    control.12 {
    comment.access 'read write'
    comment.type INTEGER
    comment.count 2
    comment.range '0 - 6928'
    comment.dbmin -1600
    comment.dbmax -1600
    iface MIXER
    name 'PCM Capture Volume'
    value.0 4096
    value.1 4096
    control.13 {
    comment.access 'read write'
    comment.type BOOLEAN
    comment.count 1
    iface MIXER
    name 'CD Capture Switch'
    value true
    control.14 {
    comment.access 'read write'
    comment.type INTEGER
    comment.count 2
    comment.range '0 - 6928'
    comment.dbmin -1600
    comment.dbmax -1600
    iface MIXER
    name 'CD Capture Volume'
    value.0 0
    value.1 0
    control.15 {
    comment.access 'read write'
    comment.type BOOLEAN
    comment.count 1
    iface MIXER
    name 'PCM Capture Switch'
    index 1
    value true
    control.16 {
    comment.access 'read write'
    comment.type INTEGER
    comment.count 2
    comment.range '0 - 6928'
    comment.dbmin -1600
    comment.dbmax -1600
    iface MIXER
    name 'PCM Capture Volume'
    index 1
    value.0 4096
    value.1 4096
    control.17 {
    comment.access 'read write'
    comment.type ENUMERATED
    comment.count 1
    comment.item.0 Mic
    comment.item.1 Mixer
    comment.item.2 'CD '
    comment.item.3 'Input 3'
    iface MIXER
    name 'PCM Capture Source'
    value Mic
    Thanks again!

    Some other observations that may be helpful (and, hopefully, get closer to the heart of the problem)...
    (1) Whenever VLC is playing audio (as mentioned in previous post, it is only application that works in desired manner), it will show up in Kmix's "Playback Streams" tab. Whenever Wine and Firefox are playing, they do NOT show up in the "Playback Streams" tab.
    (2) Kmix will not allow more than one open application to grab the UA-5 sound (e.g. If I open Firefox and play audio, stop playing audio (while leaving Firefox open), then open VLC and try to play audio, VLC will not play audio (unless Firefox is closed)). This is likely a related problem to the problem outlined in the previous post, but it might not be. If it isn't, I'll take advice on how to let KMIX grab multiple audio sources simultaneously on the same sound card.
    Thanks for reading!

  • Volume control not working after I plug in speakers or headphones

    When I turn on my 13 inch with Mac OS X version 10.6.8 or if I restart it, my volume works perfectly. However, whenever I plug in earphones or speakers the volume will be 'stuck' on the loudest it can go. When I use the volume controls on my keyboard or the slider at the top menu bar, it will make the clicking sound as if the volume is going up or down and will show the white speaker with the volume being adjusted but the volume will stay on the loudest possible setting. Even after I unplug my speakers/headphones the volume will continue to not work. There is no red light coming from the headphone jack and since it works upon startup, I'm inclined to think it's a software issue and not a hardware issue but then again, I don't know the first thing about computers. Since this has started, I've looked online for similar problems or suggestions but nobody has had this exact same issue, but I did follow the suggestions for similar issues. I repaired the disk (I could only do it for the Macintosh but I am running bootcamp with windows on the other side but I've used it maybe once for a pc only program and have never run the internet on it so I doubt the problem is coming from that side). It repaired a bunch of stuff but it didn't fix my issue. I also reset the PRAM and the NVRAM (I don't know what this does, but someone suggested it so I gave it a shot) and it did nothing. If you have a suggestion for something I can do, please be detailed, or point me to detailed instructions because my computer knowledge is very limited but I'm willing to work to fix this. Thank you!

    Make an appointment at the Genius bar at the Apple store.
    Ciao.

Maybe you are looking for