LXDM does not come after root logout (but it works fine after normal
I recently installed Arch with LXDE (and LXDM as login manager).
Everything works fine, except one strange feature I hope to solve thanks to this post.
I think I have to configure something on LXDM or X11.
I'll try to explain my problem.
When I boot computer, LXDM come.
If I login as one of my normal users, no problem: I can login and logout as many times I want, and LXDM come every time I logout.
But if I login as root, then after logout LXDM no longer come (after root logout the standard console (no X11) come).
Any suggestions?
I very rarely login as root, but in such cases I do want LXDM after logout.
Of course logging as root is a very rarely thing for me.
With su and sudo I can perform everything.
The point is to compare the desktop environmnet of "root" and "giulio".
User giulio is customized: theme, icons, panel and so on.
Instead, root has the standard LXDE environment (standard icon, standard theme, etc).
Sometimes I want to see if I installed theme for giulio only or for all. To accomplish this task I login as root and launch LXAppereance program: if I see the new icon theme (for example) then I installed that for all, otherwise, i installed that only for giulio.
This is why I found such problem I'm talking about.
Of course this is nothing important.
I can live all my life without logging as root.
But, I prefer to have all the things ordered in my system.
Now that I see LXDM is not properly configured (after root logout) I prefer to fix it (this does not mean I actually continue to log in as root).
It's just to fix things.
Similar Messages
-
any help on this would be appreciated.
we think that is is because the system (xp) is not seeing the ipod in the my computer therefore the napster software has nothing to lach on to.!Does it say that it works with iOS devices (iPhone, iPod touch or iPhone)? iOS devices have a different format/file system than other iPods.
-
iphone will not charge and turn on
You dropped it. That's what's wrong with it.
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5s. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these. -
WRT45GC - Not connecting to NTL Broadband, but internet works fine minus the router
I seem to have a problem try to get my WRT45GC to work as an accesspoint for my NTL connection. If the modem is plugged directly into my PC via ethernet cable, internet works fine. But if I plug my WRT45GC into the modem then have a direct connection to my pc from the router, i only get limited or no connectivity.
Also once this has been set up my laptop can pick up the wireless network but once again no internet.
I have been told different things by different people ie, the modem and router may have the same IP address, the router may not have DCHP enabled ( I dont have the IP address to log onto the router) please can someone help
If i unplug the router and have the modem connecting directly to the pc, internet works fine again.if u have a cable connection....follow the steps below
1) connect the computer to one of the LAN ports on the router...and connect the modem to the router's internet port.
2) check the ip add on the computer . to check the ip add go to start -> run -> cmd -> ipconfig...ensure that u have an ip add of 192.168.1.x and default gateway 192.168.1.1
2) access the router using http://192.168.1.1 . Keep the username blank and the default password is "admin".
3) go to the "mac add clone" subtab , enable it and click clone your pc's mac..save the settings....do a power cycle
4) go to the "wireless" tab , change the ssid , channel - 1 or 11.
If this does not work for u , revert back with the details - ISP name , cable / DSL , internet ip add off of the status page on the router.... -
Ich habe PSE 12 und Premiere Elements 12 neu installiert und erhalte beim Start die Meldung, Adobe PSE 12 bzw. Premiere Elements 12 Organhizer funktioniere nicht mehr, und ich solle das Programm schliessen. Was kann ich tun?
uninstall, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then reinstall.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Apple id not accepted by app store but its working fine on apple website.
i have my apple which was working fine on my mac book pro. but now its not accepted by the app store its keeps on loading for hour but no result where as the same apple id is working fine on apple website.
Click here and ask the iTunes Store staff for assistance.
(111387) -
I had/have avg toubble and now firefox will not start. I uploaded a new version but made no difference. If I click on it the time symbol comes up for a few seconds and than nothing. When I restart the computer though a small window comes up alerting me not to end the programm till it scaned it. So I figure after clicking on it something must be running in the background. But no symbol comes up on the dectop or in the application manager.
Any ideas?
Regards FranzI had/have avg toubble and now firefox will not start. I uploaded a new version but made no difference. If I click on it the time symbol comes up for a few seconds and than nothing. When I restart the computer though a small window comes up alerting me not to end the programm till it scaned it. So I figure after clicking on it something must be running in the background. But no symbol comes up on the dectop or in the application manager.
Any ideas?
Regards Franz -
Sound does not come out of iPod but can hear it with ear phones. What happened
CCannot get sound from iPod except from earphones. What has happened?
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar -
Firefox does not load my site correctly, but it loads fine in chrome and explorer
site is
www.ladehofflandscaping.comThank you. I have moved your post from the Creative Cloud to the Muse forum. They will be able to help you here.
The following information will help the Muse team:
Share one specific url that is not loading correctly. Do not ask folks to just "explore the site".
Please post a screenshot illustrating the error. The error may not happen in a different version of Firefox (or on a different OS).
Give the version number of Firefox you are using. -
I tried PRAM and I can't find my snow leopard disk. What can I do? It was worki ng fine last night and this morning it kept freezing our so I thought and didn't click anything. It automatically opens up the apple up to but can't click anything and doesn't even zoom on the apps on the bar at the bottom.
It sounds like your hard drive may be failing. If you don't have a bootable backup external hard drive or DVD, you may be out of luck. Take it in for service.
-
The search function on my mailbox is not responding after trying to search my mailbox. I am able to search my mailboxes through Spotlight though. This seems to be since upgrading to mavericks.
I was wandering if anyone has this problem and knows how I can resolve it.
Thank youHmmm,
Open Console in Utilities & see if there are any clues or repeating messages when this happens. -
MSTest not running in TFS build but tests works fine locally in visual studio
Hi Team,
I have 18 unit tests in my test project wanted to run in TFS build. But build says no tests to execute. please find the below details and images for more info.
Even MSTest command is not working.
TFS : 2010
BUild Server has visual studio 2010 ultimate with SP1.
Thanks in Advance,
Shree
$hreeHi Shree,
I am glad to hear you resolved the issue. Thanks for sharing your experience here, it is good to other members who experience the same issue in the community.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi -
Today I logged in and went to load pages in both Chrome and Safari.
Chrome loaded fine, but Safari tells me I'm not connected to the internet.
The network preferences say I'm connected via Ethernet.Check the Firewall ..
Open System Preferences > Security & Privacy > Firewall
If it's turned on, click the padlock icon then click Firewall Optios
If Safari is in the list, lick the double arrow on the right then select: Allow incoming connections then click OK. -
I have iphone 4s with several email accounts set up. For one of these accounts, and only one, test emails sent from phone come thru fine. But computer generated mail doesn't come to phone. For test messages phone shows "receiving" but nothing comes to inbox. External sent mail does not come to phone inbox, but does to outlook on computer. Have checked settings and these seem correct. What's up? Four other accounts work fine.
If you can send e-mail when on WiFi from home, but not when on 3G, that indicates your email provider is blocking e-mail being sent from outside their network. This is done to control Spam. ISPs who do this will usually have a separate SMTP server that should be used when using a mobile device. Check with them again.
-
My iPad air won't change at all, and I don't know if it's the port or charger cable it is charging normally but it just won't charge. I have had a new port put in before after a charger getting stuck in there but it worked fine after and now it's not working at all! I don't know if maybe it's the charger getting old but I have spent far too much money on this iPad then I should have as it's one problem after another witch is causing me lots of stress.
Try giving your iPad a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again.
How are you charging it? its's best charged plugged into the wall not via USB. So if you're trying via USB, try using the supplied power block plugged into the wall.
Maybe you are looking for
-
UDF to copy the file from the archive folder to the source folder
HI, I need a UDF to copy the xml file from the archive folder to the source folder. I dont want to create a new comm channel Regards, Varun Edited by: Varun Reddy on Sep 15, 2009 11:23 AM
-
Missing file name while receiving AS2 MDN acknowledgement
We are using BizTalk 2010. We send one AS2 package to our TP and our TP send us back 4 Acknowledgement files. Most of the acknowledgement files that we receive from the TP contains the ReceivedFileName property which contains the file name, except fo
-
I've just finished logging some hot shots of helicopters, F-16 fighters going low-pass etc.. To reduce the time I have to spend sitting by the Mac, I thought I'd log every clip I want, and do a batchcapture. The camcorder I used, a Canon XL H1, must
-
i was trying to put my songs from my ipod on another computer but when i did it took my songs off my ipod and put my girlfriend songs on my ipod. How do I fine my songs to put back on my ipod
-
Assign equipment from hierarchy to functional location
Hi all, I'm new to PM so the question might be a bit stupid. But I have got a hierarchy for a piece of equipment. The highest level is a recorder. The lower levels are sensors that i need to calibrate. I now want to assign the sensors (lower level) t