Lync 2010 Archiving IM log time record is 6 hours off

When I run a export of the IM logs in Lync 2010 with the following command.
Export-CSArchivingData -DBInstance lync-sql\rtc -StartDate 2/3/2014 -EndDate 2/5/2014 -OutputFolder "C:\logs" -Useruri "[email protected]"
I get the log file but all the time stamps are 6 hours off. I though oh we are in CST the server is set to UTC. Thats not the case the front end server and sql servers are all set to the correct time zones. I did see an article that referenced in OCS 2007
that the database time stamp was off. does anyone know how I can change the database time zone from UTC to CST?
Thank you
Kirt

I know that when your query the database directly it will return times in UTC, so maybe apply an offset to the output file to correct your current timezone.
Andrew Morpeth
Lync Server Specialist - Auckland, NZ
Blog - http://www.lync.geek.nz
Twitter @AndrewMorpeth

Similar Messages

Time recording in 12 hour format with CATS??

Hi CATS gurus,
Can some body let me know, whether it is possible to record time using CATS in 12 hour format using the clock times.
I need to record time as 08:00 am to 04:30 pm and the system shoud count it as total of 08:30 hours.
Incase, my query is not clear, please feel free to write me back.
Thanks & Regards, Swapnil Mishra

Hi,
In the CAC1 tCode, in the data entry profile you need to select the With clock times.
As per ur requrirement you have created the work scheudles. you assigend that work scheudle in 0007 for the employee.
While going to CAT2 tcode. there next to total colum one column is there WE there you can give the total hrs. on the basis of
works Schedule system will take that attendacne in the 2002 infotype. Then you can approve and transfer to HR through CAT4.
Then you can go and see in the 2002 infotype there you can see the start time and end time.
If you have any query's on this please let me know.
Thanks and Regards,
Revathi.

IMovie 9.0.8 "date and time" Title is 5 hours off original footage.

Since iMovie doesn't import the original Date and Time that the footage was recorded, I have been using the "date and time" Title feature, which in prior versions has worked well. Since updating to ML and iMovie 9.0.8, the time is off by approximately 5 hours. I can usually correct this by adjusting the date and time in the frame but it's an extra step I'd rather avoid. Has anyone else experienced this glitch? Is there a fix?

ablyes wrote:
…i already tried a frensh install of mountain lion
I recommended a re-install of the app, not of the OS
… what do you mean by adding some MacOS Voodoo ?
do, what I wrote: re-launch your Mac while holding down the shift-key
this triggers the Safe-Mode, which is recommended by Apple as a maintanance-routine (best done before any updatres) ....
I called it 'voodoo' as some joke ...

[SOLVED] GNOME:(Please help) Time is always 4 hours off after reboot

Hello,
I've had this odd problem for months now on Gnome and i'm going to finally ask for help. Basically, the time is always minus four hours (it is 8:38 am right now but it says 4:38 am). Manually adjusting the time does work, but it always resets after a reboot. My location in the time/date/weather panel app is set correctly. I've searched the forums and google but none of the fixes have worked, one involved changing my hardware clock from the terminal but it didnt have any effect.
The system time in the bios is always correct.
This is on my laptop (x86_64). My desktop, which is a nearly identical setup except that it is i686, has never had this issue, in fact i'm on it right now and the time is correct.
Any help would be appreciated, thanks.
Last edited by DrTankMC (2009-10-18 13:31:57)

DrTankMC wrote:I actually tried both suggestions at the same time, deleting that file and changing local to localtime and then reboot. It has been fixed, but i don't know which solution was the right one!
It's the "localtime" one.

Exchange 2010 Excessive Archive Transaction Logs

I've got an Exchange 2010 environment with about 225 users over 6 mailbox DB's with corresponding Archive DB's.
They're seeing log files for the archive DB's growing by about 25-30% of the total DB size daily. Those logs are generally about 8 x the logs generated by the corresponding primary mailbox database.
Something like
DB1 = 20GB daily average logs 2GB
DB1Archive = 90GB daily average logs ~28GB
I don't see any Retention policies that have duplicated Tags and the Default policy has no tags assigned.
The customer wants to continue with their existing backup process of weekly fulls and daily incremental/differentials, and missing two days is enough to max out their transaction log volumes. (which are as large as their combined database size).
The archive db's have been in place for at least 12 weeks now so it's not just initial population, which is obvious by the fact that the archive db's are much larger than the original db's and the total logs in a week exceed the DB volumes by 2-3 times.

Hi,
First, please make sure there is no corruption in the retention policies.
If there is no corruption, I recommend you create a new archive mailbox database and move archive mailbox to this new database to check result.
Besides, here is a similar thread for your reference.
http://social.technet.microsoft.com/Forums/en-US/77845ba9-96c4-4b94-8d55-b47c51ef8974/exchange-2010-archive-transaction-logs?forum=exchange2010
Hope this is helpful to you.
Best regards,
Belinda Ma
TechNet Community Support

Select from .. as of - using archived redo logs - 10g

Hi,
I was under the impression I could issue a "Select from .. as of" statement back in time if I have the archived redo logs.
I've been searching for a while and cant find an answer.
My undo_management=AUTO, database is 10.2.0.1, the retention is the default of 900 seconds as I've never changed it.
I want to query a table as of 24 hours ago so I have all the archived redo logs from the last 48 hours in the correct directory
When is issue the following query
select * from supplier_codes AS OF TIMESTAMP
TO_TIMESTAMP('2009-08-11 10:01:00', 'YYYY-MM-DD HH24:MI:SS')
I get a snapshot to old ORA-01555 error. I guess that is because my retention is only 900 seconds but I thought the database should query the archive redo logs or have I got that totally wrong?!
My undo tablespace is set to AUTOEXTEND ON and MAXSIZE UNLIMITED so there should be no space issues
Any help would be greatly appreciated!
Thanks
Robert

If you want to go back 24 hours, you need to undo the changes...
See e.g. the app dev guide - fundamentals, chapter on Flashback features: [doc search|http://www.oracle.com/pls/db102/ranked?word=flashback&remark=federated_search].

Setting up Lync 2010

I'm running lync 2010 server for first time on single domain. I'm able to create a online meeting request, however I get a 404- file of directory not found. *The resource you are looking for might have been removed, had its name changed, or is temporarily
unavailable.* has anyone encountered and resolve this issue?

Hi,
Based on the provided error message, I suggest you make sure to re-run step2 in the deployment wizard and do an IISreset for good measure.
I've also some issues with the same error that were resolved by reinstalling IIS URL Rewrite module and IIS Application Request Routing module:
URL Rewrite
Application Request Routing
I hope the information above is helpful. By the way, if you need further assistance upon this topic, I suggest you post in the more appropriate forum:
https://social.technet.microsoft.com/Forums/lync/en-US/home?category=ocs
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

SipSnoop, Lync 2010, Application not authorized, Registration time-out. Timed-out?

Hi,
I
am trying to run the SipSnoop sample application which came with the Lync 2010 Server SDK. Everytime I click on "Connect to Server", the application hangs for a while and then comes back with:
Application not authorized.
Registration Time-out. Timed-Out? [True]Response?[False]
Any ideas what might be going on?
Thanks,
Prem

I'm getting the same error but unable to resolve it.
First I added the MSPL,
New-CsServerApplication -Identity "Service:EdgeServer:servername.com/AppName" -Uri "http://www.companyname.com/OCS/AppName" -Enabled $true -Critical $false
After that I'm trying to start the application and see the following error in the console,
Exception ToString:Microsoft.Rtc.Sip.UnauthorizedException: Application not authorized. ---> System.ApplicationException: Registration Time-out. Timed-Out? [True] Response? [False]
--- End of inner exception stack trace ---
at Microsoft.Rtc.Sip.ServerAgent.Initialize(ApplicationManifest manifest, Boolean scriptOnly)
and in the Event log I see this,
An exception occured that cannot be handled.
Message: Application not authorized.
Exception: Microsoft.Rtc.Sip.UnauthorizedException
I've tried all the following options,
- Tried with both the Local Administrator and also the Domain Administrator.
- Both of them added to all the "RTC.." groups like "RTC Server applications".
- I also added the Domain Administrator to the RTCUniversalServerAdmins and RTCUniversalUserAdmins
- Enabled MSMQ with Active Directory integration on both the Registrar as well as the Edge Server(Note that this managed mspl is a edge server plugin).
- Made sure that the app uri is the same in the .am file and the commands and program
Please help.

Lync 2010 client and SRV record

When Lync 2010 was originally set up in our environment, we included our login domain which is a .local as a SIP domain but everyone uses our additional SIP domain which is a .org.
In our internal DNS, we have SRV records under both domains. Question is if a Lync 2010 client is doing autodiscover and their SIP domain is the .org, will the client look at the SRV record in the .local domain? I don't think this SRV record was ever used
even though its the users login domain, its not their SIP domain.

You're right, the SRV records that belongs to your .local domain are not used by the lync client for a user that hs a .org sip domain sign-in address, so as you are saying if all the users are configured with a .org sip domain that means these SRV records
were never used, and you can safely remove them.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Recover Database is taking more time for first archived redo log file

Hai,
Environment Used :
Hardware : IBM p570 machine with P6 processor Lpar of .5 CPU and 2.5 GB Ram
OS : AIX 5.3 ML 07
Cluster: HACMP 5.4.1.2
Oracle Version: 9.2.0.4 RAC
SAN : DS8100 from IBM
I have used flash copy option to copy the database from production to test machine. Then tried to recover the database to an consistent state using the command "recover automatic database until cancel". System is taking long time and after viewing the alert log it was found that, for the first time, if it is reading all the datafiles and it is taking 3 seconds for each datafile. Since i have more than 500 datafiles, it is nearly taking 25 mins for applying the first archived redo log file. All other log files are applied immeidately without any delay. Any suggession to improve the speed will be highly appreciated.
Regards
Sridhar

After chaning the LPAR settings with 2 CPU and 5GB RAM, the problem solved.

Lync 2010/2013 - Call Recording with PSTN

I am trying to find out more information about how larger companies use Lync while still recording calls to and from the PSTN. We have a huge need to be able to record specific (not all) calls in an on-demand fashion from the Lync client.
Lync seems to have some strange limitations with what it lets you record.
My issue is that Lync doesn't present options for recording calls to the PSTN unless you convert the call into a conference using some creative "tricks". Has anyone found a better way of doing this so that the user can just select record? It seems
extremely counter productive to say "hey here's our unified product", but if you need this really basic feature of a phone system you need a third party product. None of the third party products I've looked at actually integrate with Lync
in a way that the user just clicks record or some other option.
This is a major limitation of Lync for us and it is really holding up our ability to adopt Microsoft Lync. Does anyone have some good guidance on the best way to do PSTN recording with the Lync client?

Hi,Shaddie,
Yes,Lync doesn't support PSTN call except in a conferencing call,peer-to-peer call recording only works between Lync clients,and if someone call you via PSTN the call recording will not work, check the following links to have a workaround.
http://windowspbx.blogspot.com/2012/05/lync-user-tip-20-how-to-record-lync-to.html
http://blogs.perficient.com/microsoft/2011/02/call-recording-in-lync-2010-pstn-oddity/
Regards,
Sharon
Sharon Shen
TechNet Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

Windows 7 802.1x (Wired) Authentication Failure when logging into Lync 2010

Hi
My company has implemented 802.1x Wired authentication, we use GPO to specify a
Wired Profile that uses a COMPUTER certificate.
We are finding that when a Windows 7 laptop comes out of sleep or hibernation, the laptop fails 802.1x authentication and does not connect to the network.
This issue only occurs intermittently, but have been proven to occur only when Lync 2010 is open. If we close Lync 2010 the issue does not occur. Lync 2010 installs a self signed USER certificate for authentication.
I am aware that there are some issues around Windows 7 not selecting the correct certificate when responding to authentication requests (KB2710995,
KB2769121) but these always specify that the issue occurs when 802.1x authentication uses USER certificates, not a mix of USER and COMPUTER. We have installed these hotfixes and the
issue still occurs.

Hi,
From the description, you suspect the DHCP request cause this issue. Would you please send us the packets? Since it seems that you have looked into the traffic and found some clues.
Meanwhile, I found the following hotfix which may related to this issue.
No response to 802.1X authentication requests after authentication fails on a computer that is running Windows 7 or Windows Server 2008 R2 http://support.microsoft.com/kb/980295/en-us
Next Action Plan:
1.Clean Boot
a. Click Start, click Run, type "msconfig" (without the quotation marks) in the Open box, and then click OK.
b. In the Startup tab, click the "Disable All" button.
c. In the Services tab, check the "Hide All Microsoft Services" checkbox, and then click the "Disable All" button.
======================================================
Clean Boot + binary search
In a Clean Boot, all the 3rd party services and startup programs are disabled. If the server can start normally in Clean Boot, we can be sure that the issue was caused by some 3rd party service or application. And then we can do a "binary search".
You can enable half of all the services in Services tab, and then restart the server to check the result. If the issue reoccurs, it means the culprit is in this list; if not, the culprit is in the other half. And then, we can continue the binary search, until
we find out the root cause. Please let me know if this action plan is OK for you.
2.Collect etl trace on the problematic client.
netsh trace start capture=yes overwrite=yes tracefile=c:\net.etl filemode=circular
****Try to reproduce this issue****
netsh trace stop
Please send the net.etl to us for underlying analysis.
For any concerns, please let us know.
Best regards,
Steven Song
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Record a user join a Lync 2010 conference by PSTN

Hello, I remember seeing a post stating that the recording of calls from users joining A Lync Conference are not available to be recorded. Can anyone confirm this and point
me in the direction of the article/post?
Reword. If a user joins a Lync Conference from PSTN can their call be recorded?

If a user join a Lync conference from PSTN the call can be recorded, in the meeting recording.
If you want to record Lync to PSTN calls, you can use the workaround listed in the following blog:
http://windowspbx.blogspot.com/2012/05/lync-user-tip-20-how-to-record-lync-to.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Lisa Zheng
TechNet Community Support

Start Lync 2010 client on remote machine

I have a couple of users who like to logout of their Lync 2010 client. They apparently think that they are being watched through this program. This is a bit of a hassle since we use this program to see if users are sitting at their desk.
I am trying to write a .bat file to automatically kill the communicator process and then restart the program on the remote machine. I am having nothing but success with killing the communicator process using pskill. When attempting to start the
client using psexec, however, it will not work.
It will start a new communicator.exe process on the remote computer just fine. It doesn't seem to actually start the program though. There is no icon in the taskbar showing the program is running and communication with the user does not work
as it still shows them offline.
On the local machine (the one I am running from), I just use a bat file that calls another .bat file on the remote machine. The .bat file on the remote machine kills all communicator.exe processes using pskill -t. It then attempts to start a
new communicator session using "start communicator /fromrunkey" This will start a new communicator.exe process on the remote computer without any problems. That's all it will do though.
Anybody have any suggestions on what I can do to make it actually launch the client on the remote computer? I have exhausted all options I can come up with. I would like to get this working so the users in question finally figure out that if
they logout of Lync it is going to just start back up on them. Hopefully after time they will catch on and stop logging out of the program.

Have we tried giving the complete location of the communicator.exe
"start c:/.../communicator.exe /fromrunkey
Using the same script are you able to open Notepad.exe on the remote machine just for testing
for more info look at http://blogs.technet.com/b/rischwen/archive/2013/06/20/lync-2013-client-auto-start-registry-key.aspx
Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph

Lync Client 2013 not Signing in, But Lync 2010 Do Sign In

Dears,
I have a weird problem, I have installed Lync 2013 FE Server, after I finished installing it I tried to test the log in with the Lync 2013 client, it asked for authentication but everytime I enter the authentication it gives me an error of server is unavailable
now.
I've checked the DNS records, ports and certificate everything is fine, but it doesn't sign in. The weird issue here is that I tried to use a Lync 2010 client and it signed successfully with no error and within 2 seconds!!!
The only thing different in my deployment here is that I've updated the Lync to CU1 before I start the services for the first time and also before requesting and assigning the certificates.
Please do anyone has an idea of why this is happening? I will try tomorrow to uninstall Lync and its databases and start fresh without the CU1.

Hi,
Please check if the Lync 2013 uses the automatical configuration to sign in Lync seve.
Please check the Client version policy in the Lync server control panel. Maybe the client version policy block it with mistake configuration.
Have a test to install the Lync 2013 on other PC then check the issue again.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Sean Xiao
TechNet Community Support

Lync 2010 Archiving IM log time record is 6 hours off

Similar Messages

Maybe you are looking for