Lync 2010 not starting in windows 7

When I click on Lync it not starting anything, nothing happens when I click on lync.
I've reinstalled lync but same problem.
please help to solve the problem ASAP.

Hi,
1. Please open Windows Task anager to close communicator.exe and start Lync 2010 again.
2. Is it working properly before? Please try to log on from other computer in this domain and try to start Lync to test if there is any UC policy that would affect it.
3. What’s the lync version you use? Please make sure it is a full RTM client and not a trial/RC client.
4. This thread for OCS suggest to use "windows installer clean up utility"
http://social.msdn.microsoft.com/Forums/en-US/communicatorsdk/thread/5ebf8a6d-f9c7-4044-9de7-ccbe4f286f20
http://en.wikipedia.org/wiki/Windows_Installer_CleanUp_Utility
Regards,
Kent

Similar Messages

Microsoft lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program

Dear All Good day
i have Lync server 2010 and runing Good
yasterday some users cann't open Lync Client and give us this error Massege
microsoft lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program, or the product key information may have been modified in your windows
registry . please uninstall and then reinstall lync.
but another users runing Good
i'm try to unistall lync Client and install again but same problem
and Try to Install New server lync 2010 but same problem
please help me for resolve this problem
Khaled Eldosuky
Senior System Engineer
[email protected]

Hi All,
I was not able to uninstall the trial lync client, and re-install a new client? Any help will be appreciated?
All i see is the below message....
microsoft
lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program, or the product key information may have been modified in your windows registry . please uninstall and then reinstall lync.
Regards,
Venkat

Organiziser in Photoshop Elements 9 will not start in Windows 8.1. Inkompartibelt programs. What to

Hej!
Organiziser in Photoshop Elements 9 will not start in Windows 8.1. Inkompartibelt programs.
What to do?
/yoel

Ok, I had many problems with the installation, but after three attempts I've got it working. This might work with a previously failed installation - but there are other guides in the forum to get this position -thanks also to the many threads on the this - which pointed me in the right direction
Previously I'd had issues with Error 1935, (on Shared Technologies), Blue screens due to clbudf.sys from Cyberlink Instant burn which blue screened (thread abort exception) this install as also iTunes. (I haven't installed this now...
My scenario. Win 7 (clean) -> Win 8 -> Win 8.1
After setting up the setting up the system.
I ensured the following : (although begrudingly) so I could do a system restore if needed.
-I disabled Anitvirus & Firewall
-enabled Volume Shadow Copy Service
I then ensured I had downloaded Adobe Application Manager 8.0 (read this may help) - I installed - but I did not run it as I believe it updates to Adobe CC Manager( from previous attempts)
i also downloaded and installed the 32 bit versions of :
C++2008 redistributable (32 bit)
C++2008 SP1 redistributable (32 bit)
I installed Premiere Elements (64 bit) - note I had previously installed Sony Vegas 10 Platinum, which downloaded and installed NET 3.5/Net 2.0 adding to windows features, which many have helped - not sure.
I installed Photoshop Elements (32 bit)
I started both apps and updated them to 12.1.
Happy ... finally - hope this helps others - or at least helps adobe improve their installer, diagnose the issue for others.

There is no problem in Outlook but Lync does not start. → "Microsoft Lync cannot be started"

hi,
There is no problem in Outlook but Lync does not start.
→
“Microsoft Lync cannot be started”
Addtional Info:Office2007（natural
but 32bit）is in use.
External devices except phone are not connected.
Not able to understand the issue. vene tried unistalled and re-install same issue.
Is there any add-in kind of issue?

What happens if you have no outlook.exe and any office software such as word excel or powerpoint running and then you try to launch Lync Does it still fails Can you give more detail about the error in that scenario?
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer". Regards Edwin Anthony Joseph

I just "upgraded"????? to Lightroom CC, now it will not start on Windows 7. can someone help me?

I had Lightroom 5 and the creative cloud photographer bundle. upgraded (some joke) to Lightroom CC and no lightroom will not start on Windows 7. just dead in the water. any help?

The fix was to completely remove all Apple Software following guides in previous posts.
Then download and re-install latest iTunes 64-bit, making sure to Run As Administrator.
This fixed it. Now the next thing seems to be that as I move from one device to another to close and restart iTunes between each one. Treat it gently. It seems to break easily and a lot.

Multiple instances not starting using Windows services

Hi,
We have two Oracle instacnes installed in same oracle home. They are not starting using windows 2000 service manager.
I have to go to svrmgrl and set the ORACLE_SID environment variable to startup each instance. How can I make them start through windows Services instead of manually doing it.
Is installing multiple instances in same home a good idea?
These multiple instances are not part of paralell server.
Regards,
Wasim.

Hi,
I have checked the registry keys and everything looks ok.
ORACLE_instance_AUTOSTART is true
ORACLE_instance_PFILE is correct
ORACLE_instance_SHUTDOWN is true
ORACLE_instance_SHUTDOWNTYPE is i
Above values are right for both instances. I even have recreated the services using ORADIM. I can start both instances by going to command prompt set ORACLE_SID and start the instance using SVRMGRL. But they'll not autostart when the machine is rebooted.
Regards,
Wasim.

Windows could not start the Windows Audio service on Local Computer.

Hi
I started my PC today and i didn't have sound... weird
i'm getting this error when i want to start the Windows Audio service
"Windows could not start the Windows Audio service on Local Computer.
Error 0x800706cc: The end point is a duplicate."
HELP PLEASE!!!!!

Hi,
Have your gotten any updates installed?
Regarding to current information, this issue can be caused by corrupted updated files or drivers.
Please check if there is any update related to audio driver. Can this issue be fixed if you remove such update?
I also suggest you can try to reinstall Audio driver to check the results.
Kate Li
TechNet Community Support

LYNC 2010 on Supportability on Windows 2012 R2

Is it possible to run Lync server 2010 on Windows server 2012 R2?
Is there any known issues running LYNC 2010 Enterprise pool with Enterprise Voice on Windows 2012 R2 OS?
Any special requirements or issues installing LYNC 2010 on Windows 2012 R2?
We have one pool on Windows 2008 R2, would like to add additional pool with Windows 2012 R2.
Thanks in Advnace
Tek-Nerd

Per the following URL:
http://technet.microsoft.com/en-us/library/gg412883(v=ocs.14).aspx
Microsoft does not support this on operating systems that are not listed on this page for Lync 2010. Windows Server 2012 (and R2) are not listed as supported.
There are several new features in Server2012 that are not used in Lync 2010. I would not install 4 year old enterprise software on a platform such as Server 2012 R2. There are enough hoops to jump through with Lync 2013.
if my post is helpful - please click on the green arrow. (please excuse, in advance, any perceived sarcasm/humor - as I often forget it does not translate through text) :)

Lync 2010 not saving IM messages to Outlook

We have a small number of users who have issues with their Lync communicating with the exchange, they do not get any flagged errors however their IM messages are not being saved & they do not have the folder within Outlook.
The Exchange server is hosted internally, the Lync server is supplied by a 3rd party.
Many other users including myself have no problems in this regard.
They are currently running Windows XP with Office 2007 & Lync 2010.
I have checked their folder count which is no where near 1000
I have created a brand new profile on their machine.
I have found that under HKEY_CURRENT_USER\Software\Microsoft\Communicator/<username> the autodiscovery folder does not exist
I have also found under HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft the Communicator & Lync folder do not exist (these registry folders have been mentioned in troubleshooting I have found on MS website) http://support.microsoft.com/kb/2000886
I have attempted a re-install of Lync.
I should also mention that I signed the user into my own machine (same, XP, Office07, Lync2010) which for myself the conversation history works but still the user has issues.
I've also had the 3rd party create a brand new Lync account for the user.
Does anyone have any ideas here?? Would anyone know why these registry keys are missing as the install is done in the same manner on each machine, the majority of which work correctly.
Thanks for any help
Sam

The issue may be caused by failed EWS connection. Please check the following tips:
1. Please check other Exchange integration features work properly and the option “Personal information manager” has been selected in Lync client.
2. In this user's Lync, please holding down CTRL and right-clicking the Lync icon located in the System Tray and click Configuration Information .
Please check if the status of EWS information is ok. Please also check if Value of EWS Internal URL and EWS External URL is correct.
3. On user's client, please go to HKCU\Software\Microsoft\Communicator\[User SMTP Address]\Autodiscovery, please check if the URL of the
following items are correct:
ExternalEwsUrl
InternalEwsUrl
For more details about troubleshooting EWS issue on Lync client:
http://social.technet.microsoft.com/wiki/contents/articles/ews-not-deployed-on-the-lync-2010-configuration-tab.aspx
Also you can refer below link
http://support.microsoft.com/kb/2689469/en-us
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical

In XP Mode on Windows 7, after installing application as like I would normally on an actual XP system, application will not start in windows XP mode itself.

Just did a clean install of windows 7. I then downloaded windows XP mode and Windows Virtual Mode. Everything ran flawlessly and everything is updated. I needed to Install a program called Dentrix 10.5 which can only be installed on Windows
XP for numerous reasons and one including it needing to use Microsoft .NET 1.0. I installed this program on Windows XP Mode as I would as if I were installing it with a computer with windows XP. The Install of the program went fine and completed.
Still being in Windows XP Mode I wanted to see how it would run. I hit Start Menu, All Programs, Startup Programs, and clicked on the Dentrix Application. Once I clicked it the time glass on the mouse was there for a few seconds and
then went away without the application starting up at all. One thing that I'm thinking is why after I clicked Start Menu, All programs, is why was Dentrix not in its own folder and instead in the Startup programs after All programs? Any Ideas how
to get the program to run? Like I said, I am trying to run the program in Windows XP Mode and not Windows 7 as I have found many Q's and A's on only how to do that. Also this is the second application which I downloaded and the first being Microsoft
Security Essentials so I know I don't have some virus from keeping from opening the Dentrix Application. Incase you are wondering the Microsoft Security Essentials opens and runs fine in Windows XP Mode. So Pretty Much My Main question is: Why
my application not starting up in Windows XP Mode? Any help is greatly appreciated!

Once I clicked it the time glass on the mouse was there for a few seconds and then went away without the application starting up at all.
A couple times a week I open Dentrix 11.0 in a virtual machine on Windows 7. I experience the same thing almost every time I open the VM. I must first get Windows to "reconnect" my network for me. Do this by opening Start | My Computer, and
double-click on the mapped network drive leading to the Dentrix data. After I can see the Dentrix data drive, Dentrix will be able to read it too and will open correctly.
In Dentrix, seeing nothing (or briefly seeing a hourglass and then seeing nothing) is a classic sign that either:
- The database files are marked as Read Only
- The program cannot access the data files (probably the folder it is pointed to does not contain any data).
- Or possibly the database path does not point to the right location where the data files are located
Open the folder where you installed the program files of Dentrix (probably c:\program files\dentrix\) and double-click to run EP.EXE. The database path will be revealed. You can "Browse" to the correct location, and "OK" through the dialog to
close them. Then try opening Dentrix again.
Should that not work, open Start | My Computer, and try to open the path (starting with the drive letter, then the folder structure you saw in EP.EXE).
By the way, if your path uses UNC (starting with two back-slashes and then the computer name of the server), you'll need to map a network drive and replace your path with a mapped drive path. (Map a drive in Start | My Computer | Tools | Map Network
Drive). Dentrix really doesn't like UNC paths.
Dentrix 10.5 can only be installed on Windows XP
Microsoft .NET 1.0
Just FYI, Microsoft .Net Framework 1.0 is required only for the "Time Clock" feature of Dentrix. Windows 7 already has .NET Framework features up to version 3.5 built in, and Time Clock (in my experience) works great under Windows 7 without installing
.NET 1.0.
Have you tried installing directly in Windows 7? I have a specific reason why I don't (I have a newer version of Dentrix installed on my Win 7 machine, and use the VM to go back to an older database occasionally - so I can't mix two different program versions
on the same machine). If you were to try installing this program under Windows 7 directly, Dentrix will launch the Microsoft .NET Framework install after the Dentrix install is completed. Just cancel out at that point (Windows will probably give you an "incompatibility"
error message anyway before allowing the install to go through) and I believe you can run it under Windows 7. That might eliminate the networking-through-the-VM issue. So, if you have no other reason not to install Dentrix on your Windows 7 machine directly,
I'd try it. You might be surprised and if it works, you'd save yourself some headache with connecting the to network through the virual machine.
Is why was Dentrix not in its own folder and instead in the Startup programs after All programs?
During the installation, on the Select Program Folder screen, you must have clicked the "Startup" option under Existing Folders. By default, "Dentrix" will be typed into the box at the top. If you simply clicked Next, it would have gone
to the correct location. The screen is a little confusing, because something in the list will be highlighted by default, but what is typed into the box at the top will actually be used.

SQL Express 2008 R2 will not start on Windows 7 Home

Ok, This used to work, and then over night my system rebooted and now I cannot start SQL Express 2008 R2 after I have unistalled, and re-installed.   Cleared out the folders and the certificates, changed the Named Pipes configuration and all to
no avail.   Here is my log file.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2014-06-14 08:45:18.18 Server      Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)
   Jun 17 2011 00:54:03
   Copyright (c) Microsoft Corporation
   Express Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2014-06-14 08:45:18.18 Server      (c) Microsoft Corporation.
2014-06-14 08:45:18.18 Server      All rights reserved.
2014-06-14 08:45:18.18 Server      Server process ID is 8924.
2014-06-14 08:45:18.18 Server      System Manufacturer: 'SAMSUNG ELECTRONICS CO., LTD.', System Model: '700Z3A/700Z4A/700Z5A/700Z5B'.
2014-06-14 08:45:18.18 Server      Authentication mode is MIXED.
2014-06-14 08:45:18.18 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG'.
2014-06-14 08:45:18.18 Server      This instance of SQL Server last reported using a process ID of 2820 at 6/14/2014 8:32:55 AM (local) 6/14/2014 1:32:55 PM (UTC). This is an informational message only; no user action is required.
2014-06-14 08:45:18.18 Server      Registry startup parameters:
   -d C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\master.mdf
   -e C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG
   -l C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\mastlog.ldf
2014-06-14 08:45:18.18 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-06-14 08:45:18.18 Server      Detected 8 CPUs. This is an informational message; no user action is required.
2014-06-14 08:45:18.21 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-06-14 08:45:18.23 Server      Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2014-06-14 08:45:18.25 spid7s      Starting up database 'master'.
2014-06-14 08:45:18.28 spid7s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'ACT7'.
2014-06-14 08:45:18.29 spid7s      SQL Trace ID 1 was started by login "sa".
2014-06-14 08:45:18.29 spid7s      Starting up database 'mssqlsystemresource'.
2014-06-14 08:45:18.30 spid7s      The resource database build version is 10.50.2500. This is an informational message only. No user action is required.
2014-06-14 08:45:18.32 spid7s      Server name is 'MARTINDAHL-PC\ACT7'. This is an informational message only. No user action is required.
2014-06-14 08:45:18.32 spid10s     Starting up database 'model'.
2014-06-14 08:45:18.32 spid7s      Informational: No full-text supported languages found.
2014-06-14 08:45:18.32 spid7s      Starting up database 'msdb'.
2014-06-14 08:45:18.33 Server      Error: 17190, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server      Initializing the FallBack certificate failed with error code: 1, state: 1, error number: -2146893802.
2014-06-14 08:45:18.33 Server      Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-06-14 08:45:18.33 Server      Error: 17182, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-06-14 08:45:18.33 Server      Error: 17182, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-06-14 08:45:18.33 Server      Error: 17826, Severity: 18, State: 3.
2014-06-14 08:45:18.33 Server      Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-06-14 08:45:18.33 Server      Error: 17120, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server      SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
-=-=-=-=-=-=-=-=-=-=
I am logged into either the Administrator Account or my Account in which I am in the Adminstrator Group or an Admin.   My OS is Windows 7 Home Premium Edition, so I cannot clear out the MSSQL groups and things I have seen online. Since this
is Express, there is limited capabilities with the config tool.
I have tried to change the log in as in the SQL Configuration tool and every item I check, Local Service, Local System, Network Service all give the same error,
"Cannot Find Object or Property. [0x80042004]
SInce I have Home Premium, MMC will not load the snap in for Local Users and groups to check out these items.
A check of the net user shows only the Administrator, Guest and my local login in Admin Account. net localgroups show these items.
*Administrators
*Distributed COM Users
*Event Log Readers
*Guests
*HomeUsers
*IIS_IUSRS
*IIS_WPG
*Performance Log Users
*Performance Monitor Users
*SQLServer2005SQLBrowserUser$MARTINDAHL-PC
*SQLServerFDHostUser$MartinDahl-PC$ACT7
*SQLServerMSSQLServerADHelperUser$MARTINDAHL-PC
*SQLServerMSSQLUser$MartinDahl-PC$ACT7
*SQLServerSQLAgentUser$MARTINDAHL-PC$ACT7
*Users
The command completed successfully.
I checked the SSL and Force Encryption is set to no and the certificates have been cleared.
I am not sure how to solve this problem.   Please help.   Thanks, in advance.

I created a new Administrator account on the machine, mdahl.   I then started the SQL Configuration Tool and changed the log on to this new account. Same problem.   Here is the SQL Log.
2014-06-14 11:24:15.83 Server      Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)
   Jun 17 2011 00:54:03
   Copyright (c) Microsoft Corporation
   Express Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2014-06-14 11:24:15.83 Server      (c) Microsoft Corporation.
2014-06-14 11:24:15.83 Server      All rights reserved.
2014-06-14 11:24:15.83 Server      Server process ID is 11448.
2014-06-14 11:24:15.83 Server      System Manufacturer: 'SAMSUNG ELECTRONICS CO., LTD.', System Model: '700Z3A/700Z4A/700Z5A/700Z5B'.
2014-06-14 11:24:15.83 Server      Authentication mode is MIXED.
2014-06-14 11:24:15.83 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG'.
2014-06-14 11:24:15.83 Server      This instance of SQL Server last reported using a process ID of 5952 at 6/14/2014 11:21:35 AM (local) 6/14/2014 4:21:35 PM (UTC). This is an informational message only; no user action is required.
2014-06-14 11:24:15.83 Server      Registry startup parameters:
   -d C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\master.mdf
   -e C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG
   -l C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\mastlog.ldf
2014-06-14 11:24:15.83 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-06-14 11:24:15.83 Server      Detected 8 CPUs. This is an informational message; no user action is required.
2014-06-14 11:24:15.87 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-06-14 11:24:15.88 Server      Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2014-06-14 11:24:15.90 spid7s      Starting up database 'master'.
2014-06-14 11:24:15.91 spid7s      1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
2014-06-14 11:24:15.91 spid7s      0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
2014-06-14 11:24:15.91 spid7s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2014-06-14 11:24:15.92 spid7s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'ACT7'.
2014-06-14 11:24:15.93 spid7s      SQL Trace ID 1 was started by login "sa".
2014-06-14 11:24:15.93 spid7s      Starting up database 'mssqlsystemresource'.
2014-06-14 11:24:15.93 spid7s      The resource database build version is 10.50.2500. This is an informational message only. No user action is required.
2014-06-14 11:24:16.03 spid7s      Server name is 'MARTINDAHL-PC\ACT7'. This is an informational message only. No user action is required.
2014-06-14 11:24:16.03 spid10s     Starting up database 'model'.
2014-06-14 11:24:16.03 spid7s      Informational: No full-text supported languages found.
2014-06-14 11:24:16.03 spid7s      Starting up database 'msdb'.
2014-06-14 11:24:16.03 Server      Error: 17190, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server      Initializing the FallBack certificate failed with error code: 1, state: 1, error number: -2146893802.
2014-06-14 11:24:16.03 Server      Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-06-14 11:24:16.03 Server      Error: 17182, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-06-14 11:24:16.03 Server      Error: 17182, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-06-14 11:24:16.03 Server      Error: 17826, Severity: 18, State: 3.
2014-06-14 11:24:16.03 Server      Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-06-14 11:24:16.03 Server      Error: 17120, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server      SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
Also, the link you provided is to Windows Vista, not Windows 7 Home Premium. However, I did look at the registry setting they said to look at in the link.
Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
Under the ProfileList subkey, delete the subkey that is named <var>SID</var>.bak.
Note <var>SID</var> is a placeholder for the security identifier (SID) of the user account that is experiencing the problem. The <var>SID</var>.bak subkey should contain a ProfileImagePath registry entry that points to the original profile
folder of the user account that is experiencing the problem.
Exit Registry Editor.
Looking into my registry for my ProfilesList as mentioned. I have these items.
S-1-5-19 Folder with Default (Value not set), Flags (REG_DWORD) 0x0000000, ProfileImagePath (REG_EXPANDS_SZ) C:Windows\ServiceProfiles\LocalService, State (REG_DWORD) 0x0000000
S-1-5-20 Folder with Default (Value not set), Flags (REG_DWORD) 0x0000000, ProfileImagePath (REG_EXPANDS_SZ) C:Windows\ServiceProfiles\NetworkService, State (REG_DWORD) 0x0000000
Then I have an item for each of my three accounts, Administrator, Martin Dahl, and mdahl, All admin Accounts, which has no sid.bak, but a Sid, so not sure how this link helps me either.   Still looking for assistance. Still not starting.

Bridge CS6 will not start in Windows 7

Bridge CS6 (both 32 and 64) don't start in Windows 7.
Bridge starts in Task Manager for a few seconds, but goes away. No errors, no logs.
I have tried all the suggestions I've found within the forums, including checking settings,, temp environment variables, deleting C:\Users\[your user name]\AppData\Roaming\Adobe\Bridge CS6 (including the directory itself), etc. No luck. Adding a new user, then using it to start Bridge worked great, but that is not really a solution. One added piece of info: Bridge did recreate the above directory before dying, although it remains empty. I haven't found any logfiles that might help understand how far it got. Is there a log file or a registry setting that will enable detailed logging to help diagnose this?
I managed to gather a temp xml file that has some info that might help. This file shows up for the few seconds when Bridge is running.
<?xml version="1.0" encoding="UTF-16"?>
<WERReportMetadata>
<OSVersionInformation>
<WindowsNTVersion>6.1</WindowsNTVersion>
<Build>7601 Service Pack 1</Build>
<Product>(0x1): Windows 7 Ultimate</Product>
<Edition>Ultimate</Edition>
<BuildString>7601.17835.amd64fre.win7sp1_gdr.120503-2030</BuildString>
<Revision>1130</Revision>
<Flavor>Multiprocessor Free</Flavor>
<Architecture>X64</Architecture>
<LCID>1033</LCID>
</OSVersionInformation>
<ParentProcessInformation>
<ParentProcessId>3996</ParentProcessId>
<ParentProcessPath>C:\Windows\explorer.exe</ParentProcessPath>
<ParentProcessCmdLine>C:\Windows\Explorer.EXE</ParentProcessCmdLine>
</ParentProcessInformation>
<ProblemSignatures>
<EventType>APPCRASH</EventType>
<Parameter0>Bridge.exe</Parameter0>
<Parameter1>5.0.0.399</Parameter1>
<Parameter2>4f5ec28e</Parameter2>
<Parameter3>Bridge.exe</Parameter3>
<Parameter4>5.0.0.399</Parameter4>
<Parameter5>4f5ec28e</Parameter5>
<Parameter6>c0000005</Parameter6>
<Parameter7>000000000036ae49</Parameter7>
</ProblemSignatures>
<DynamicSignatures>
<Parameter1>6.1.7601.2.1.0.256.1</Parameter1>
<Parameter2>1033</Parameter2>
<Parameter22>dca5</Parameter22>
<Parameter23>dca5eef3eb4639786ac397e2f866e6e1</Parameter23>
<Parameter24>cde9</Parameter24>
<Parameter25>cde994f1594c84823c9c1be215d1d32c</Parameter25>
</DynamicSignatures>
<SystemInformation>
<MID>C1C89176-2E22-457C-8B68-F9633BDBDBAB</MID>
<SystemManufacturer>System manufacturer</SystemManufacturer>
<SystemProductName>System Product Name</SystemProductName>
<BIOSVersion>0303</BIOSVersion>
</SystemInformation>
</WERReportMetadata>
There is obviously something in my normal user's profile or environment that is getting in the way of startup. Yes, my normal user is an admin. You (Adobe) have the code and the startup can't be that convoluted. Someone should be able to walk the code, figure out what things are checked between creating the above directory and the next externally detectable step (like creating a file in this directory or logging something into a log file), then reply here with a list of specific things to check.
I got into a chat with Adobe support several days ago, where I went through several steps of ensuring I was using a properly licensed version only to be told that he didn't know Bridge and asked that I call during the day on Monday. The sign off message to that chat was funny - they mentioned 24x365 support :-) Luckily, I've worked support in my past and I have a sense of humor.
I tried to file a bug form the web, but failed to navigate the amazingly bad support web experience of Adobe.com. At one point, I had found a place to do it, pasted the above into that window, then tried to submit - I wasn't logged in. So, I clicked the login link and got an error pop-up window with a bad-link error. I came in fresh - logged in, then could not find that "report a bug" screen again. Truly amazing. But I guess, if you cannot report a bug, it doesn't exist - so congratulations on your bug-free products.
A suggestion:
Provide a simple link to report a bug that's not tied to a service plan. It would simply be a way to tell you about problems with the hope that a solution could be provided in a future release - these can optionally be logged to the forums for community involvement. I don't mind logging in to prove I'm a valid user.

Adobe staff has to browse these forums on their own time (I know that should be part of their job) so their visits are infrequent.
There are several sites to report bugs which seems to be counterproductive. I think this one has the most support right now. http://feedback.photoshop.com/photoshop_family
And you are sure you are not running Bridge CS5 in the background? You can only run one Bridge program at any one time.
In both the Mac and Win OS seems like the workaround to create a new user works frequently, but it is a hassle. In your problem solving did you unistall everything then run the Adobe Script Cleaner?
Although this is a stretch for this problem, but might search your uninstall directroy and see if there are any expired Adobe trials you have not uninstalled. For whatever reason it can stop launch of Bridge "as you need to launch parent application at least once". Apparently even though it is long gone it is still seeing it as "parent" program. As I said it is kind of a stretch here, but you never know.
Good luck on this as I know it is extrememly frustrating and Adobe does have its communication problems.
That is why it is important for the users to step up and start contributing to these forums with suggestions on what to try, thiings they have tried and worked or did not, etc.

Wily Enterprise Manager Service not Started in Windows 2008 Server

Hi All,
Our Solution Manager is in EHP1 SP21 and OS-Windows 2008 Server.
We installed Wily Enterprise Manager 8.0. and found 1 non-fatal error in the installation log. The service is not starting.
However it works fine for Windows 2003 Server.
Can anyone encountered with the same kind of problem?
This is the latest log file information:
Summary
Installation: Successfulwith errors.
387 Successes
0 Warnings
1 NonFatalErrors
0 FatalErrors
Action Notes:
Execute ANT Script:       Script:
                          Status: ERROR
                          Additional Notes: ERROR - E:\usr\sap\ccms\wilyintroscope\install\em.installer.exec.ant15.xml:425: Timeout: killed the sub-process
Thank you in advance.
Regards
Sanjai

Note 1273028 - Introscope 8 Release Notes resoved this issue.
Known problems in all Releases 8.x
2. Windows Server 2008 is not yet officially supported by CA Wily for the Enterprise Manager. If you want to install the Enterprise Manager anyway, set the "Windows 2003 compatibility mode" for the installer before launching it. To activate this mode, right click on the installer.exe file in the Windows Explorer, select tab "Compatibility", activate the check box for compatibility mode and select Windows 2003. If you do not set this, the installer will consider your OS as Unix and install shell scripts (no suffix) instead of batch files (.bat) and leave out some files for Windows Service registration.
If the windows service still fails to start please check if files ServiceWrapper.jar and ServiceWrapper.dll are present in folder lib. If not download them from attachment of this note.
The service should start although giving an error message regarding the ServiceWrapper.dll. You can ignore this error.

Photoshop CS5 and CS6 does not start. Windows 7

I am using Photoshop CS5 as well as CS6, 64-bit on Windows 7. Since the last few days, I noticed that Photoshop would take a very long time to start (earlier it used to start within few seconds). Today, I found that both the Photoshop versions do not start at all. Nothing happens when I click the short-cut on the Task Bar. Neither do they start through the Start Menu. Why does this happen and what is the solution?

Have you tried using the task manager to see if Photoshop is hung and look at your windows reliability history to see if Photoshop CS5 an CS6 are crashing?

Firefox version 3.5.16 will not start under Windows Vista and Windows 7 32bit

I have a Windows Vista computer that will not start any newer version of Firefox than 3.5.16. The process will run (as seen in the Task Manager) but do nothing.
I have since updated Windows to version 7 and the problem persists.
I have tried uninstalling Firefox and all Addons (flash-player, pdf-reader) and deleting all files (even user-specific ones).
Firefox can't be started in Profilemanger or safe-mode either.
Is there anything short of reinstalling windows I can try?

Solved it!
It was a dodgy version of Firebug (1.6.2) running, which would kill the disable/update process. It was killing something on the first run that would corrupt my Firefox.
How I fixed it:
* Download the latest Firefox
* Install Firefox 4 (as Standard) in-place upgrade
* Before finishing, un-tick the "Run Firefox Now" button
* Hit Finish
* Find Firefox in the Start Menu and hold Shift and click the executable (safe mode)
* Leave everything disabled
* You should now have a working Firefox!
Remove/update your add-ons as needed. I only had to upgrade Firebug in safe mode to get it working.
Odd how the check for updates completely broke this Firefox, wonder what was so bad about Firebug.
Hope this helps at least one other person! The "Run in Safe Mode" option is so hard to discover now when your browser is broken!

Lync 2010 not starting in windows 7

Similar Messages

Maybe you are looking for