Lync 2010 with Exchange 2010-2013 Migration?

We are installing Lync 2010 for the purpose of internal LAN and Internet/Federated instant messaging, video chat and desktop sharing.  
There is no telephone integration and there is no Unified Messaging used in Exchange 2010.
Within a few months after rolling out Lync 2010, Exchange 2010 is going to be migrated to Exchange 2013.  Outlook will remain at Office 2010 and Lync client will be 2010.  We will continue to not use Exchange Unified Messaging after Exchange is
upgraded to 2013.
Are there any steps required to keep Lync 2010 working normally after the Exchange environment is upgraded from 2010 to 2013 in this scenario?

Hi 
During the migration and post migration to EWS URL for the user i reachable by the Lync 2010 Client 
And the outlook client is able to establish a Mapi session with the mailbox all should be fine
as best practice please have the Lync 2010 and outlook 2010 client update to the latest CU update 
There is known issue when migrating from Exchange 2007 to 2013 good to know information 
http://silbers.net/blog/2013/12/19/lync-ews-broken-during-exchange-20132007-transition/
Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph

Similar Messages

  • Uploading photo from Lync client with Exchange 2010

    We are using Lync 2013 standard edition with Exchange 2010 in our environment.
    In the client, if we go to Tools -> Options -> My Picture, the option to "Edit or Remove Picture" is greyed out.
    I understand this is only available if we're on Exchange 2013, but someone somewhere must have figured out a workaround for this? Anyone know a reg-hack or 3rd party tool that would enable this feature?
    I realize there is a method to turn back on the "Show a picture from a website" via powershell. I have already done this in our environment. However it is quite unrealistic to expect general populace to know how to resize a picture to less than
    30kb (?!) and upload it "somewhere" on the web. Understandably this would be a nightmare for Help Desk having to help people resize their photos and find somewhere to upload it to.
    Any help/ideas would be appreciated!

    You could centrally upload profile photos for your users into the AD's thumbnailPhoto attribute using...
    powershell:
    http://blogs.technet.com/upload-picture
    3rd party software: 
    http://www.codetwo.com/freeware/active-directory-photos/
    http://www.cjwdev.co.uk/Software/ADPhotoEdit/Info.html
    Lync client side upload into Exchange 2010 will not be possible as Exchange 2013 introduced HD photo and storing photos in the mailbox. Take a look at: http://technet.microsoft.com/en-us/library/jj688150.aspx
    Please mark posts as answers/helpful if it answers your question.
    Blog
    Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

  • Outlook 2007/2010 with Exchange 2010 missing tasks operation has failed only on PC not OWA

    We have searched this topic to no success I'm baffled as to how to resolve this problem.
    End user software: Outlook 2007 and Outlook 2010,
    Server side: MS Server 2012 R2 with MS Exchange 2010
    Scenario: We have merged 2 forests together to a new forest. Months before hand had rolled out exchange 2010. A majority of users in
    forest2 still are on Office 2007 where as users in
    forest1 are nearly all on Office 2010.
    Now so far we have 3 users (from Forest2) whom have reported 'missing tasks' with the message 'Operation has Failed' when attempting to view their tasks. 
    We have ran the outlook commands related to this type of issue that clear the reminders and resetting them with - No Success.
    They have no issue when using OWA, or Outlook via mobile device. The issue only occurs on PC. We have tried profile rebuilds, fresh SOE, the issue appears to be resolved but the next time the user opens Outlook the problem comes back.
    On the server we have ran all the integrity checks no corruption has been found in any way.

    Hi,
    I recommend that you try the following method on client PC and then check the result:
    Click Start >> Click Run >> Type outlook.exe /resettodobar
    >> Click OK. 
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • How to : Configure Project Server 2010 to work with Exchange Server 2013

    Hi everybody. I have a problem. I did integration success project server 2010 with exchange server 2010. But now my customer use exchange server 2013. So my question is "Have a way to integration project server 2010 with exchange server 2013 ?"

    I haven't seen any document with Project 2010 and Exchange 2013. You could still try the old document with Project 2010 and Exchange 2010.
    http://technet.microsoft.com/en-us/library/ff468700(v=office.14).aspx
    It might just work.
    Thanks Gaurav Wason MCITP, PMP

  • Limitations of SharePoint 2013 integration with Exchange 2010?

    Customer using SharePoint 2013 and looking at whether its possible to integrate this with Exchange 2010 and which features would be available / limitations. Looking for a matrix similar to those found in the Good, Better, Best documents available for previous
    versions. Nothing available on Recently Published content for SharePoint 2013 yet http://technet.microsoft.com/en-us/library/cc262043.aspx

    I haven't seen a specific list, but the three features I've run into that only work with Exchange 2013 are eDiscovery in Exchange, Automatic Task Synchronization with Outlook and the Site Mailbox feature.  There is a Legacy Task Synchronization mode
    available that will work with Exchange 2010 if you turn off the Farm level feature controlling Exchange 2013 task synchronization.  It lets users manually sync specific task lists with Outlook.  But there is no task aggregation.  I found this
    whitepaper helpful for exploring the new features and how to turn them off when using Exchange 2010.
    http://www.microsoft.com/en-us/download/details.aspx?id=38799
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Exchange 2013 DLP with Exchange 2010 mailboxes

    Ive got an Exchange 2007/2010 environment. I've been looking at Exchange 2013 and am interested in the DLP funtionality.
    There are no plans to move mailboxes to Exchange 2013 but would it be possible to install an Exchange 2013 CAS/Mailbox server in my environment and route email through it to make use of the DLP ?
    Current environment consists of Exchange 2010 DAG, Casarray and hub transport servers, and Exchange 2007 mailbox servers, CAS and hub transports. Mail to the internet is sent to a smarthost.
    Thank you.

    Hi Maria,
    DLP Policies are actually a specific transport rule. Since the transport rules with Exchange 2010 didn’t provide such feature to monitor and check the e-mail
    content, I am afraid, in theory, it’s not possible.
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Does Edge transport server for Exchange 2013 work with Exchange 2010?

    Hello everyone,
    I want to install Edge transport server for my Exchange servers,
    Could you tell me if Edge transport server 2013 works with Exchange 2010?
    Thank you in advance

    Hello
    tip:
    https://technet.microsoft.com/en-us/library/jj898583%28v=exchg.150%29.aspx
    2   If you want to create an EdgeSync
    Subscription between an Exchange 2010 Hub Transport server and an
    Exchange 2013 SP1 Edge Transport server, you need to install Exchange
    2010 SP3 Update Rollup 5 or later on the Exchange 2010 Hub Transport
    server.
    sorry my english

  • Edge 2013 sp1 with exchange 2010 organisation.

    Dear reader,
    I have an exchange 2010 sp3 organisation with 1 client access server with hub transport and a 2 node DAG. Can I install a stand alone exchange 2013sp1 Edge role on a seperate machine in DMZ and subscribe the exchange 2010 hub transport to it. This
    in preparation to move to exchange 2013sp1 later this year. The current exchange 2010 edge role is installed on a TMG 2010 machine. Since TMG 2010 is dropped and we also have issues with the current edge's mailflow, i'd like to have a dedicated Exchange edge.
    Best regards,
    Ruud Boersma
    MCITP Enterprise administrator

    Sure, You can install Edge of Exchange 2013 on a dedicated server in DMZ and subscribe with Exchange 2010 Transport server.
    Or you can allow the Existing Exchange 2010 Edge server to serve your internet mail flow till the time you implement Exchange 2013 in the environment. I would suggest Exchange 2013 CU5 as a lot of issues were fixed in that which were identified with Exchange
    2013 SP1.

  • Migration from Exchange server 2010 to Exchange server 2013

    Hi All,
    We have migrate Exchange Server 2010 to Exchange Server 2013. When I turned off my Exchange Server 2010, Outlook is not able to connect through Exchange 2013. It's prompting for user name and password again and again and nothing would happen
    after provide user name and password. So, we are not able to uninstall exchange 2010 from old server.

    Run these commands and post the update.
    Get-WebservicesVirtualDirectory -Server E2K13SERVER |Fl internalURL,ExternalURL
    Get-OWAVirtualDirectory -Server E2K13SERVER | Fl internalUrl,ExternalURL
    Get-ClientAccessServer E2K13SERVER | Fl AutodiscoverServiceInternalUri
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Outlook 2010 Exchange Server 2010 to Exchange Server 2013 Features

    Hi All
    We have recently upgraded from Exchange Server 2003 to Exchange Server 2010. We are using the Outlook 2010 (32 bit) email client. When mailboxes were moved on to the new server various features inside the system were activated. For email Internal Out of
    Office Messages, External Out of Office Messages, notifications in the email recipient bar when creating emails if the user was out of office.
    What new features would be available with Outlook 2010 (32 bit) and Exchange 2013. And are they dependent on the Office Service Pack?
    Kind Regards
    Please note that I have previously posted this in another forum but was advised to post here in this forum.

    Hi,
    I find your post on Office forum:
    http://social.technet.microsoft.com/Forums/en-US/fc538968-212c-411c-8ce8-0ef1d7acfcca/outlook-2010-exchange-server-2010-to-exchange-server-2013-features?forum=outlook
    The Steve's answer is comprehensive, great links on Exchange 2013 new features and removed features.
    About "And are they dependent on the Office Service Pack?", I will give the answer.
    Based on my knowledge, when new SP releases, it include enhancements in security and compliance, architecture and administration, and user experiences.
    For example, Exchange 2013 SP1, it connects to Outlook 2013 SP1 via MAPI over HTTP.
    If you want to know more about the Exchange new features, please see Exchange Team Blog.
    Find blog about SP1 for your reference:
    http://blogs.technet.com/b/exchange/archive/2014/02/25/exchange-server-2013-service-pack-1-available.aspx
    Thanks
    Mavis
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Replace Exchange Server 2010 by Exchange Server 2013 in Window 2008 R2 SP1

    Hi everybody, My story is I had 2 VM before:
       - Project Server 2010 + Active Directory integration with Exchange 2010
       - Exchange 2010
    But now my customer want to use Exchange 2013. So i created a new VM for installing exchange 2013. But I research and know that installing exchange 2010 and exchange 2013 in same Domain is not recommended. So plz help me find the best way, because I dont
    want to create new AD + new Project Server 2
    Thanks

    Hello,
    You posted the same query in a different Project / Project Server forum. It looks like the question is for Exchange / AD and not Project Server or Project related. I can move the post to one of these forums if you like or re post in the Exchange or AD forum.
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS

  • Unity 5.0 compatibility with Exchange 2010 SP2?

    Has anyone out there tested Unity 5.0 (1) with Exchange 2010 SP2? Did you have any problems? I understand that Unity 5.x has gone end of maintenance, and it has not been officially been tested for compatibility with Exchange 2010 SP2 for unified messaging. I don't anticipate being able to upgrade Unity until next year, but the sytem admins want to upgrade from Exchange SP1 to SP2 sooner. Thanks.

    Has anyone out there tested Unity 5.0 (1) with Exchange 2010 SP2? Did you have any problems? I understand that Unity 5.x has gone end of maintenance, and it has not been officially been tested for compatibility with Exchange 2010 SP2 for unified messaging. I don't anticipate being able to upgrade Unity until next year, but the sytem admins want to upgrade from Exchange SP1 to SP2 sooner. Thanks.

  • Cisco Unity Connection Single inbox with Exchange 2010

    I have a new installation of Unity Connection 8.6.2 using single inbox with an Exchange 2010 cluster frontended by a Netscaler load balancer.Functionality that does not work is when a new message comes into outlook and the message is read or deleted it does not update the status on the phone- IE turn off the MWI or if the message is deleted it is still a new message in Unity. If you click reset in the user unified message account, the status gets updated.
    TAC says its a blocked port on Exchange TCP 7080 but that is open.

      I followed this document :
    http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/unified_messaging/guide/85xcucumg020.html
    but when i try to integrate CUC with exchange 2010 , i didn't find is clear enough
    do you have Step by Step more clear than that link becouse my lab very close to your case.
    Regards

  • TS4532 Any idea on the timing of the software update to fix the IOS6.1 problems with Exchange 2010?

    Any idea on the timing of the SW update to fix the IOS 6.1 problem with Exchange 2010?
    victor

    In reply to Macca7275
    We moved from Blackberry to iPhone for 120 services in 2010.  We have just renewed the iPhone fleet.  Security was the issue for the business that employs me (lawyers).  When comparing the two, Blackberry performed without issue most of the time but we experienced a number of issues with the trackballs on individual phones. This was, however, the first of the Blackberry Bold models.  The expense behind the scenes was one of the major factors for the move. It was cheaper to run Exchange and iPhones than Blackberry services. Our lawyers on the whole adopted the iPhones and a number have become quite proficient at using them. We ensured that we had a means to securely wipe and lock business phones. We chose Mobile Iron for this purpose but you will find other products to do the same job. Cost is probably going to be the deciding factor here.  Our only negative factor was butterfingers resulting in smashed glass with the iPhones although I have had one user drown several phones.

  • Does SL Mail/iCal/Address Book work with Exchange 2010?

    Is anyone using Exchange 2010 with Mail/iCal/Address Book (via the Snow Leopard web services interface and not the IMAP interface)?
    My company is about to upgrade Exchange from 2003 to either 2007 or 2010 and since the boss and I both use Macs we want to make sure that SL's apps will work no matter what choice of Exchange server is made.

    SL has not been tested with Exchange 2010 as far as I am aware. 10.6.2 was only tested against the 2007 variant.

Maybe you are looking for