Lync 2013 and simultaneous ring
We have Lync 2013 and 2010 in our topology with Cisco Call Manager version 8.x. Simultaneous ring worked for a while but is no longer fully functional. Lync client to Lync client calls ring in Lync and on the desktop phone but calls to the desk number do
not ring in Lync. Users are set up in mobility and set for enterprise voice and have a URI. The voice policy has sim ring enabled. I don't see much in the logs but I might be looking in the wrong place. Anywhere I can look on the log server or client side
to narrow it down? I am not the VoIP guy but any help would be appreciated.
Check the following document about how to configure simultaneous ring feature between Lync Server and Cisco Unified Communications Manager:
http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns728/ns784/1048876.pdf
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software
or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Lisa Zheng
TechNet Community Support
Similar Messages
-
Is Lync 2013 and Office 2010 Home and business compatible?
hi,
Is Lync 2013 and Office 2010 Home and business compatible?
tnxLync 2013 and office 2010 is compatible with limited features
The following features are available only with Office 2010 or Office 2013:
Contact card with expanded options, such as video call and desktop sharing
Quick search from the Find a Contact field in Outlook
Reply with an IM or call from the Outlook Home ribbon in the Mail, Calendar, Contacts, and Tasks folders
Lync Contacts list in Outlook To-Do Bar
Office Backstage (File tab) presence status, program sharing, and file transfer
Presence menu in Microsoft Office SharePoint Workspace 2010 (formerly Microsoft Office Groove 2007)
Presence menu extensibility
Also you can refer below link
http://technet.microsoft.com/en-us/library/gg412817.aspx
For your issue, verify from lync version {for example , if your office 64 bit, Lync must be 64 bit also}
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
Lync 2013 and SQL 2012 on the same server
Hi,
I'm in the process of migrating Lync 2010 to Lync 2013. I have a clean install of Windows Server 2012 R2. Is it possible to install Lync 2013 and SQL 2012 on the same server or does it have to be on separate servers.
Thanks
PConfigure Separated SQL Server to use in an Enterprise deployment of Lync Server. Standard Edition servers use a collocated SQL Server Express version of SQL Server that is right sized for the workloads of a Standard Edition server.
Also you can refer below link
http://technet.microsoft.com/en-us/library/gg425848.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer" -
Dear All,
It is always come to be a confusing, about certificate when it comes to lync 2013 and edge. suppose i have domain abc.com and i have to plan to add additional sip domain like xyz.com, abc.com, dfg.com etc. and my default domain would be abc.com so my naming
option would be like this meet.abc.com/sipdomain/meet. I am little confuse how this is teckle in frontend and edge role. Do i have to get new request in edge or have to just import certificate generated in frontend and import into edge.Thanks Eric and Thamara,
So for internal CA, which means i have to install active directory certiificate and no need to buy certificate from public authority. and which include following entries on first front end server admin.defaultsipdomain.com, dialin.defaultsipdomain,
lyncdiscoverinternal.defaultsipdomain, lyncdiscover.defaultsipdomain.com
Or i should i get it from public authority and add all edge and front end requirement and reverse proxy in ucc certificate and use same to import into front end and edge and reverse proxy. -
Lync 2013 Android Client and simultaneous ring problem
this is sort of a duplicate but since the other one was marked as answered when it was not I figured I'd start this topic up again.
I set up the Android mobile client on my phone and all seemed to work fine (apart from the know bu where it keeps saying "calls aren't setup to ring mobile device..." whether the are or not) but I've run into the super annoying issue where
even if you turn simultaneous ring off for the cell phone number it still rings through when I get a call on my Lync work phone (a bit delayed so it rings just before voice mail picks up). What stinks is that even if I completely sign out of the Lync mobile
app I still get these ring throughs. The only solution was to reinstall the app with a bogus cell number (which is a bad way to go as it might be calling a random number if I'm not careful). the other thread had a moderator give the answer to create a user
level voice policy to not allow simultaneous ringing. Yeah, thanks. I'd actually like to use the feature sometimes and so would all of my users.
So, is this a bug in the Android client? In the Mobile functionality on the server? What? When I run SEFAUtil on my account it doesn't show any simulring or forwarding (my full Lync 2013 client agrees with that) so what the heck is going on. I can't roll
this upgrade from 2010 out to users until this can be resolved.
SteveI think I found the solution to the annoying ring to the phone even when your turn off your call forwarding/sim ring.
In Lync 2013 desktop client, when you first setup SIM ring, it asks you to enter the phone that you would like to have sim ring. In this case, most likely your cellphone number. Then when you are sick of SIM ring, you decide to turn this feature off, but
you still get SIM ring to your cellphone which is very annoying. If I remember correctly, in Lync 2010, when you switch from SIM ring ON to OFF, the cellphone number will be deleted automatically. In Lync 2013, however, doesn't do so. Therefore, your cellphone
number is still there even though your have call forwarding OFF. This is a bug. The work around to it is to go to Tools > Options > Call Forwarding, select SiM ring; then from the drop down list, instead of choosing your saved cellphone number, choose
WORK number. Then select "Turn Off Call Forwarding". Now, go back to SIM ring option again, you will see the saved cellphone number is now gone. It will only display your work number. Now, try to make a test call to your Lync phone, it shouldn't ring to your
cellphone anymore.
To me, this seems to have fixed it. You can try this and let me know if that fixes yours too.
A@RJC -
VVX handset initiated call will not connect to Lync client with simultaneous ring enabled
Has anyone encountered a similar issue? And any advice on how to fix it please? (note - a case has been logged with Polycom, but weeks are passing by and they have not provided any useful response so far; hence reaching out in
the community for help) .... thanks in anticipation.
Here's the scenario:
A Lync 2010 user in the office (I'll call her Lisa) has setup her Sim Ring to an external number (her mobile number).
Another Lync 2010 user in the office (Mike) calls Lisa's extension from his VVX410.
Lisa answers the incoming call using her Lync client with a USB headset.
The call appears to connect according to Mike and his VVX screen starts the call timer.
Lisa's Lync client just says "Connecting Call ..." but never actually connects.
The line is silent for both Mike and Lisa. There is no audio in either direction.
Further testing reveals the following:
The same problem occurs if Lisa uses a VVX handset to answer and also happens if she uses a CX600 handset to answer. Hence the problem seems to relate specifically to the fact that Lisa has setup Sim Ring to an external number; rather than relating
to the answering device type.
If Lisa changes her Sim Ring so that it calls another internal extension, then the problem does not exist, i.e. calls connect fine. Hence it seems to be specific to sim ring to an external number.
The environment is Lync Server 2010 CU6, Lync client 2010 on Win 7 (although the same problem exists when tested with a Lync 2013 on Win 8.1 client); and with AudioCodes Mediant 2000 and 1000 gateways.Please specify another external number for Simultaneously Ring.
You phone may not have permission to dial an external phone number.
Please check if you can call the external phone number directly.
Lisa Zheng
TechNet Community Support -
Lync 2013 - consuming 180 ringing responses from a forked request
Is it possible to configure Lync 2013 to only send a single 180/183 ringing back upstream after an INVITE to Lync triggers multiple INVITEs to Lync subscriber endpoints that each end up generating a 180/183 message.
In case of simultaneous ring, I want Lync to consume all these 180s to avoid unnecessary messaging back to the originator INVITE'ing Lync that is behind a SBC.
It seems to be acting as a forking proxy rather than b2bua.Hi,
Agree with Holger Bunkradt.
Lync Server determines which endpoint is currently most active for that user. For example, a user might be Away at two of the three endpoints, so the server sends the message only to the endpoint where the user is Available. If the server is unable to determine
which state is most active, it sends the message to the endpoint it determines most likely active and waits to see if the user acknowledges the toast at any location. If the user opens the toast at an endpoint, the server removes the message from the other
endpoints. If an endpoint doesn’t acknowledge the message, the server leaves the message at only one location which is the most likely endpoint.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
New Lync 2013 and no mobile to PC calling
I have a new Lync 2013 enterprise server deployment. PC with 2013 client and android phone with 2013 mobile client can both connect and IM fine. but when I make a Lync call it will ring but not answer even if I click accept. It just says
connecting.... I have looked at logs for the PC, phone and on the server but dont see any errors. I am just not sure where to go from here. Any suggestions would be greatly appreciated.
Thanks!!After looking through the massive lync clinet 2010 log for almost 3 hours I finally found this:
02/07/2014|11:14:20.065 1250:120C INFO :: BYE sip:[email protected];opaque=user:epid:F75G9E5FoVmO8RMWQRntYgAA;gruu SIP/2.0 Via: SIP/2.0/TLS 127.0.0.1:50042 Max-Forwards: 70 From: <sip:[email protected]>;tag=967b0de09e;epid=e115ec3448
To: "phone"<sip:[email protected]>;tag=d007b4c5e;epid=212185984839 Call-ID: d6c4a0b89c58477b87650daa0bb16fe9 CSeq: 3 BYE User-Agent: UCCAPI/4.0.7577.0 OC/4.0.7577.0 (Microsoft Lync 2010) ms-client-diagnostics: 23; reason="Call failed to establish
due to a media connectivity failure when one endpoint is internal and the other is remote";CallerMediaDebug="audio:ICEWarn=0x2b,LocalSite=10.1.1.158:14842,LocalMR=pu.bl.ic.ip-AV:3478,RemoteSite=10.38.210.159:19600,PortRange=1025:65000,LocalLocation=1,RemoteLocation=2,FederationType=0"
Proxy-Authorization: NTLM qop="auth", realm="SIP Communications Service", opaque="E84145BE", targetname="FrontEndSrv1.domain.local", crand="f5c0735e", cnum="28", response="0100000065633334d5df23b80d7f3491" Content-Length: 0
02/07/2014|11:14:20.065 1250:120C INFO :: End of Sending Packet - pu.bl.ic.ip-sip:443 (From Local Address: 127.0.0.1:50042) 994 bytes
someone please tell me you know exactly what I need to do to fix it. THANKS!!! -
Issues with mobility and autodiscovery with Lync 2013 and IIS/ARR
Hi all,
this is my last resort after days and days searching a solution for this problem... unsuccessfully.
All works fine unless the autodiscovery service with external users and the mobility service for both internal and external ones.
I deployed a Standard Edition Lync Server 2013 with:
a consolidated Frontend server in LAN
an Archiving and Monitoring server in LAN
an Edge server in DMZ with 2 NICs (one in DMZ network and one in LAN)
a IIS/ARR 2.5 reverse proxy in DMZ with 2 NICs (one in DMZ network and one in LAN)
All these roles are on Windows Server 2012 R2.
No split-DNS is deployed since I have different domains for internal and external. In any case I used the pinpoint DNS tip to resolve some records internally (I followed this guide http://tsoorad.blogspot.ch/2012/10/lync-server-dns-pinpoint-zones.html)
Here DNS records into internal domain:
A-record for meet.domain-ext.com points to Frontend server local IP
A-record for dialin.domain-ext.com points to Frontend server local IP
A-record for lyncdiscoverinternal.domain-ext.com points to Frontend server IP
A-record for lyncwebexternal.domain-ext.com points to Frontend sever local IP
A-record for autodiscover.domain-ext.com points to Exchange server local IP
Here DNS records into external domain:
CNAME-record for lyncdiscover.domain-ext.com points to lyncwebexternal.domain-ext.com
CNAME-record for sipexternal.domain-ext.com points to lyncwebexternal.domain-ext.com
A-record for meet.domain-ext.com points to Reverse Proxy public IP
A-record for dialin.domain-ext.com points to Reverse Proxy public IP
A-record for lyncwebexternal.domain-ext.com points to Reverse Proxy public IP
I installed and configured IIS/ARR 2.5 with KB2732764 and KB2785586 on Reverse Proxy following the NextHop guide. The local IP address of external NIC on Reverse Proxy is NATTED by a Cisco ASA firewall with public IP address and only 80/443
ports are permitted.
The problems occurs when I try to connect whit my Lync 2013 APP on iPad using autodiscovery service, both internally and externally. After some seconds the APP shows the message “Cannot connect to the server because it could be busy or
temporarily unavailable. Retry.” When I used the IIS/ARR 3.0 the problem looked like an authentication issue, then I came back to ISS/ARR 2.5 version with its KB. Now I cannot understand what is the cause about logfail.
The same behavior occurs with Android Lync 2013 APP and Windows Phone 8 APP.
Moreover my Lync 2013 client on Windows 7 can connect internally with autodiscovery settings but it cannot do it externally.
I'm a bit confused because I cannot understand if the problem is about external webservice of Frontend server or about Reverse Proxy configuration or about Lync Control Panel configuration.
Here is an extracted of iPad Lync 2013 log (sorry if it’s a bit long).
Any helps are very appreciated, thansk a lot!
</SentRequest>
2013-12-20
11:33:00.781 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl
called with url = http://lyncdiscover.domain-ext.com/, hopCount = 0, maxHops =
10
2013-12-20
11:33:00.781 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/409:Allocating stream 0x11cbe40 for url -
https://lyncdiscover.domain-ext.com/ with persistent id as 6
2013-12-20
11:33:00.782 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/131:Added
Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2013-12-20
11:33:00.782 Lync[563:6d00000] VERBOSE TRANSPORT
CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
url https://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected].
Sending over direct connection.
2013-12-20
11:33:00.782 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/385:Submitting new req.
UrlTrustResolver(0x1201358)
2013-12-20
11:33:00.782 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1783:Successfully started the GetUserUrlOperation
request for http://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected]
2013-12-20
11:33:00.796 Lync[563:6d00000] INFO TRANSPORT CTransportThread.cpp/343:Sent
Request(UcwaAutoDiscoveryRequest) to Request Processor
2013-12-20
11:33:00.796 Lync[563:6d00000] WARNING TRANSPORT
CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning
NULL credential for serviceId (4) type (1)!
2013-12-20
11:33:00.797 Lync[563:6d00000] INFO TRANSPORT
TransportUtilityFunctions.cpp/631:<SentRequest>
GET
http://lyncdiscover.domain-ext.com/
Request Id:
0x1201358
HttpHeader:Accept
application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2013-12-20
11:33:00.797 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/409:Allocating stream 0x12028f0 for url -
http://lyncdiscover.domain-ext.com/ with persistent id as 7
2013-12-20
11:33:00.798 Lync[563:6d00000] VERBOSE TRANSPORT
CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
url http://lyncdiscover.domain-ext.com/. Sending over direct connection.
2013-12-20
11:33:00.798 Lync[563:6d00000] INFO TRANSPORT CHttpStreamPool.cpp/556:Not
setting TLS as the url(http://lyncdiscover.domain-ext.com/) is not https
2013-12-20
11:33:00.812 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:00.812 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:00.812 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:00.813 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:00.813 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:04.104 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/577:Received
kCFStreamEventEndEncountered (UcwaAutoDiscoveryRequest)isHeadersAvailable =
true responseHeadersHandle = 12c5d70
2013-12-20
11:33:04.105 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/628:Response
status = 200 for request UcwaAutoDiscoveryRequest
2013-12-20
11:33:04.105 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/455:Scheduling stream 0x12028f0 for release.
2013-12-20
11:33:04.105 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/173:Received response of
request(UcwaAutoDiscoveryRequest) with status = 0x0
2013-12-20
11:33:04.106 Lync[563:6d00000] INFO TRANSPORT
TransportUtilityFunctions.cpp/925:<ReceivedResponse>
GET
http://lyncdiscover.domain-ext.com/
Request Id:
0x1201358
HttpHeader:Cache-Control
no-cache
HttpHeader:Content-Length
1076
HttpHeader:Content-Type
application/vnd.microsoft.rtc.autodiscover+xml; v=1
HttpHeader:Date
Fri, 20 Dec 2013 10:33:02 GMT
HttpHeader:Expires
-1
HttpHeader:Pragma
no-cache
HttpHeader:Server
Microsoft-IIS/8.5
HttpHeader:StatusCode
200
HttpHeader:X-AspNet-Version
4.0.30319
HttpHeader:X-Content-Type-Options
nosniff
HttpHeader:X-MS-Server-Fqdn
frontend-lync.domain-int.com
HttpHeader:X-Powered-By
ASP.NET, ARR/2.5
Ôªø<?xml
version="1.0" encoding="utf-8"?><AutodiscoverResponse
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
AccessLocation="Internal"><Root><Link
token="Domain" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=domain-ext.com"
/><Link token="User" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=domain-ext.com"
/><Link token="Self" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root?originalDomain=domain-ext.com"
/><Link token="OAuth" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=domain-ext.com"
/><Link token="External/XFrame"
href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
/><Link token="Internal/XFrame" href="https://frontend-lync.domain-int.com/Autodiscover/XFrame/XFrame.html"
/><Link token="XFrame" href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
/></Root></AutodiscoverResponse>
</ReceivedResponse>
2013-12-20
11:33:04.108 Lync[563:6d00000] INFO TRANSPORT
CUcwaAutoDiscoveryResponse.cpp/112:location value is internal
2013-12-20
11:33:04.108 Lync[563:6d00000] INFO TRANSPORT
CUcwaAutoDiscoveryResponse.cpp/195:User url is https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.109 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/266:Sending event to main thread for
request(0x1201358)
2013-12-20
11:33:04.109 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2013-12-20
11:33:04.109 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with
url = http://lyncdiscover.domain-ext.com/, Hops = 1, status = S_OK (S0-0-0)
2013-12-20
11:33:04.109 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/725:Response received for req.
UrlTrustResolver(0x1201358): S_OK (S0-0-0) (Success); Done with req.; Stopping
resend timer
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/393:CUcwaAutoDiscoverGetUserUrlOperation::onEvent
received. Status = S_OK (S0-0-0), url =
http://lyncdiscover.domain-ext.com/
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/449:Received a root response
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/456:Running trust check on user url.
url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with
url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com,
maxHops = 1
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl
called with url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user,
hopCount = 0, maxHops = 1
2013-12-20
11:33:04.111 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/131:Added
Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2013-12-20
11:33:04.111 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/385:Submitting new req.
UrlTrustResolver(0x11d4d38)
2013-12-20
11:33:04.111 Lync[563:6d00000] INFO TRANSPORT CTransportThread.cpp/343:Sent
Request(UcwaAutoDiscoveryRequest) to Request Processor
2013-12-20
11:33:04.111 Lync[563:6d00000] WARNING TRANSPORT
CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning
NULL credential for serviceId (4) type (1)!
2013-12-20
11:33:04.112 Lync[563:6d00000] INFO TRANSPORT
TransportUtilityFunctions.cpp/631:<SentRequest>
GET
https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user
Request Id:
0x11d4d38
HttpHeader:Accept
application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2013-12-20
11:33:04.112 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/409:Allocating stream 0x125fa90 for url - https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user
with persistent id as 7
2013-12-20
11:33:04.112 Lync[563:6d00000] VERBOSE TRANSPORT
CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user.
Sending over direct connection.
2013-12-20
11:33:04.113 Lync[563:6d00000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
stream 0x12028f0.
2013-12-20
11:33:04.261 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/577:Received
kCFStreamEventEndEncountered (UcwaAutoDiscoveryRequest)isHeadersAvailable =
true responseHeadersHandle = 11cfbd0
2013-12-20
11:33:04.262 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/628:Response
status = 200 for request UcwaAutoDiscoveryRequest
2013-12-20
11:33:04.262 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/455:Scheduling stream 0x11cbe40 for release.
2013-12-20
11:33:04.263 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/173:Received response of
request(UcwaAutoDiscoveryRequest) with status = 0x0
2013-12-20
11:33:04.263 Lync[563:6d00000] INFO TRANSPORT
TransportUtilityFunctions.cpp/925:<ReceivedResponse>
GET
https://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected]
Request Id:
0x12450d8
HttpHeader:Cache-Control
no-cache
HttpHeader:Content-Length
1076
HttpHeader:Content-Type
application/vnd.microsoft.rtc.autodiscover+xml; v=1
HttpHeader:Date
Fri, 20 Dec 2013 10:33:02 GMT
HttpHeader:Expires
-1
HttpHeader:Pragma
no-cache
HttpHeader:Server
Microsoft-IIS/8.5
HttpHeader:StatusCode
200
HttpHeader:X-AspNet-Version
4.0.30319
HttpHeader:X-Content-Type-Options
nosniff
HttpHeader:X-MS-Server-Fqdn
frontend-lync.domain-int.com
HttpHeader:X-Powered-By
ASP.NET, ARR/2.5
Ôªø<?xml
version="1.0" encoding="utf-8"?><AutodiscoverResponse
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
AccessLocation="Internal"><Root><Link
token="Domain" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=domain-ext.com"
/><Link token="User" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=domain-ext.com"
/><Link token="Self" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root?originalDomain=domain-ext.com"
/><Link token="OAuth" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=domain-ext.com"
/><Link token="External/XFrame"
href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
/><Link token="Internal/XFrame" href="https://frontend-lync.domain-int.com/Autodiscover/XFrame/XFrame.html"
/><Link token="XFrame" href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
/></Root></AutodiscoverResponse>
</ReceivedResponse>
2013-12-20
11:33:04.264 Lync[563:6d00000] INFO TRANSPORT
CUcwaAutoDiscoveryResponse.cpp/112:location value is internal
2013-12-20
11:33:04.265 Lync[563:6d00000] INFO TRANSPORT
CUcwaAutoDiscoveryResponse.cpp/195:User url is https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.265 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/266:Sending event to main thread for
request(0x12450d8)
2013-12-20
11:33:04.266 Lync[563:3a71018c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req.
completed, Stopping timer.
2013-12-20
11:33:04.266 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/290:Received a root response
2013-12-20
11:33:04.266 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation
completed with url = https://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected],
userUrl = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com,
status = S_OK (S0-0-0)
2013-12-20
11:33:04.266 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/725:Response received for req.
GET-UnAuthenticatedGet(0x12450d8): S_OK (S0-0-0) (Success); Done with req.; Stopping
resend timer
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/399:Cancelling all requests
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/409:Cancelling request: 0x11d4d38
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO TRANSPORT CSessionBase.hxx/158:Cancelling
request: 0x11d4d38
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/163:Added
Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with
url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user,
Hops = 1, status = W_Cancelled (W0-0-6)
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation
completed with url = http://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected],
userUrl = , status = W_Cancelled (W0-0-6)
2013-12-20
11:33:04.268 Lync[563:6d00000] INFO TRANSPORT CTransportThread.cpp/343:Sent
Request(UcwaAutoDiscoveryRequest) to Request Processor
2013-12-20
11:33:04.268 Lync[563:3a71018c] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential
for serviceId(1) returning: credType (1) signInName ([email protected])
domain () username (mattia.spagnoli) password.empty() (0) certificate.isValid()
(0) privateKey.empty() (1) compatibleServiceIds(1)
2013-12-20
11:33:04.268 Lync[563:3a71018c] INFO TRANSPORT
CMetaDataManager.cpp/403:Received a request to get the meta data of type 0 for
url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.269 Lync[563:3a71018c] INFO TRANSPORT CMetaDataManager.cpp/467:Sending
Unauthenticated get to get the web-ticket url
2013-12-20
11:33:04.269 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/131:Added
Request() to Request Processor queue
2013-12-20
11:33:04.269 Lync[563:3a71018c] INFO TRANSPORT
CAuthenticationResolver.cpp/109:Waiting on Meta Data from https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.269 Lync[563:62d4000] INFO TRANSPORT CTransportThread.cpp/343:Sent
Request() to Request Processor
2013-12-20
11:33:04.270 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/385:Submitting new req.
GET-AuthenticatedUserGetRequest(0x1201ab8)
2013-12-20
11:33:04.270 Lync[563:62d4000] WARNING TRANSPORT
CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning
NULL credential for serviceId (4) type (1)!
2013-12-20
11:33:04.270 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1189:Submitting Authenticated AutoDiscovery
request to https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.270 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/455:Scheduling stream 0x125fa90 for release.
2013-12-20
11:33:04.271 Lync[563:62d4000] INFO TRANSPORT
TransportUtilityFunctions.cpp/631:<SentRequest>
GET
https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
Request Id:
0x1206198
HttpHeader:Accept
HttpHeader:X-MS-WebTicket
xxxxxxxxxx
</SentRequest>
2013-12-20
11:33:04.271 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1662:Ignoring GetUserUrlOperation event as
current state is 6
2013-12-20
11:33:04.271 Lync[563:62d4000] INFO UTILITIES
CHttpStreamPool.cpp/409:Allocating stream 0x11c0a40 for url - https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user
with persistent id as 15
2013-12-20
11:33:04.271 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1664:Request
url was http://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected]
2013-12-20
11:33:04.272 Lync[563:62d4000] VERBOSE TRANSPORT
CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com.
Sending over direct connection.
2013-12-20
11:33:20.621 Lync[563:3a71018c] INFO UTILITIES
CNetworkMonitor.cpp/217:Reachabilility Flags IsWWAN(0):Reachable(0):TransientConnection(0):ConnectionRequired(0):ConnectionOnTraffic(0):InterventionRequired(0):ConnectionOnDemand(0):IsLocalAddress(0):IsDirect(0)
2013-12-20
11:33:20.623 Lync[563:3a71018c] INFO UTILITIES CNetworkMonitor.cpp/186:Updated
networkAvailableToConnect(CellularDataNetwork) -> NoNetwork,
isInAirplaneMode(0) -> 1
2013-12-20
11:33:20.623 Lync[563:3a71018c] INFO APPLICATION
CUcmpConversationsManager.cpp/4091:CUcmpConversationsManager::canDoVideoBasedOnNetworkAndPolicy
returns false because RequestWiFiForAudio or RequestWifiForVideo is true and
current network : is not WiFi
2013-12-20
11:33:20.623 Lync[563:3a71018c] INFO APPLICATION
CUcmpConversationsManager.cpp/1672:CUcmpConversationsManager::queryCapability
on StartP2PVideoCall returns false because
canDoVideoBasedOnNetworkAndPolicy
returned false
2013-12-20
11:33:20.904 Lync[563:3a71018c] INFO UTILITIES
CNetworkMonitor.cpp/217:Reachabilility Flags
IsWWAN(1):Reachable(1):TransientConnection(1):ConnectionRequired(0):ConnectionOnTraffic(0):InterventionRequired(0):ConnectionOnDemand(0):IsLocalAddress(1):IsDirect(0)
2013-12-20
11:33:20.905 Lync[563:3a71018c] INFO UTILITIES CNetworkMonitor.cpp/186:Updated
networkAvailableToConnect(NoNetwork) -> CellularDataNetwork,
isInAirplaneMode(1) -> 0
2013-12-20
11:33:20.905 Lync[563:3a71018c] INFO TRANSPORT CEventChannelManager.cpp/826:Received
network monitor event so restarting event channel.
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO TRANSPORT
CEventChannelManager.cpp/520:Moving the event channel aggressive mode.
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO APPLICATION
CUcmpConversationsManager.cpp/4091:CUcmpConversationsManager::canDoVideoBasedOnNetworkAndPolicy
returns false because RequestWiFiForAudio or RequestWifiForVideo is true and
current network : is not WiFi
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO APPLICATION
CUcmpConversationsManager.cpp/1672:CUcmpConversationsManager::queryCapability
on StartP2PVideoCall returns false because
canDoVideoBasedOnNetworkAndPolicy
returned false
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/2070:adIsEnabled
= 1, sipUri = sip:[email protected], m_internalADUrlInput =
m_externalADUrlInput =
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/255:Discovery is in progress and process state is
6Ignoring request to start network discovery
2013-12-20
11:34:04.274 Lync[563:62d4000] INFO UTILITIES
CHttpStreamPool.cpp/455:Scheduling stream 0x11c0a40 for release.
2013-12-20
11:34:04.275 Lync[563:62d4000] ERROR UTILITIES CHttpConnection.cpp/517:Connection
timedout for request (0x%u0x12d1ea0) - notifying error E_ConnectionTimeoutError
2013-12-20
11:34:04.275 Lync[563:62d4000] INFO TRANSPORT
CHttpRequestProcessor.cpp/173:Received response of request() with status =
0x22020005
2013-12-20
11:34:04.276 Lync[563:62d4000] INFO TRANSPORT
CHttpRequestProcessor.cpp/201:Request
resulted in E_ConnectionTimeoutError (E2-2-5). The retry counter is: 0
2013-12-20
11:34:04.276 Lync[563:62d4000] INFO TRANSPORT
CHttpRequestProcessor.cpp/266:Sending event to main thread for
request(0x1206198)
2013-12-20
11:34:04.277 Lync[563:3a71018c] INFO TRANSPORT
CMetaDataManager.cpp/581:Received response for meta data request of type 60
with status 570556421
2013-12-20
11:34:04.277 Lync[563:3a71018c] ERROR TRANSPORT CMetaDataManager.cpp/597:Unable
to get a response to an unauthenticated get to url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:34:04.278 Lync[563:3a71018c] INFO TRANSPORT CAuthenticationResolver.cpp/210:MetaData
retrieval for url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
completed with status 570556421
2013-12-20
11:34:04.278 Lync[563:3a71018c] INFO TRANSPORT CAuthenticationResolver.cpp/239:Deleting
1 pended Meta data requests for url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:34:04.278 Lync[563:3a71018c] ERROR TRANSPORT CAuthenticationResolver.cpp/288:Unable
to get the meta data for server url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO TRANSPORT
CAuthenticationResolver.cpp/293:Failing request to the request manager
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO TRANSPORT CRequestManager.cpp/273:Failing
secure request UcwaAutoDiscoveryRequest with status E_ConnectionTimeoutError
(E2-2-5)
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1284:Received autodiscovery response with status
E_ConnectionTimeoutError (E2-2-5)
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1242:Raising Autodiscovery event with status
E_ConnectionTimeoutError (E2-2-5) for eventType 0
2013-12-20
11:34:04.280 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/417:Received
event for type 0 with status E_ConnectionTimeoutError (E2-2-5)
2013-12-20
11:34:04.280 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/496:Raising Autodiscovery event
with status E_ConnectionTimeoutError (E2-2-5) for eventType 0
2013-12-20
11:34:04.280 Lync[563:3a71018c] ERROR APPLICATION
CUcwaAppSession.cpp/2066:Auto-discovery failed, aborting sign-in!
2013-12-20
11:34:04.280 Lync[563:3a71018c] INFO APPLICATION CUcwaAppSession.cpp/998:CUcwaAppSession::setNewActualState()
state=0
2013-12-20
11:34:04.294 Lync[563:3a71018c] INFO UTILITIES
CBasePersistableComponent.cpp/230:Storing 7 out-of-sync components took 10ms
2013-12-20
11:34:04.295 Lync[563:3a71018c] INFO UTILITIES CiOsAppStateQuery.h/147:Clearing
keep-alive timer callback
2013-12-20
11:34:04.295 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/134:Clearing request processor for component
UcwaAutoDiscoverySession on sign-out.
2013-12-20
11:34:04.295 Lync[563:62d4000] INFO TRANSPORT
CHttpRequestProcessor.cpp/134:Clearing request processor for component
MetaDataManager on sign-out.
2013-12-20
11:34:04.295 Lync[563:3a71018c] INFO APPLICATION CAlertReporter.cpp/64:Alert
received! Category 1, Type 201, level 0, error E_ConnectionTimeoutError
(E2-2-5), context '', hasAction=false
2013-12-20
11:34:04.296 Lync[563:6d00000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
stream 0x11cbe40.
2013-12-20
11:34:04.296 Lync[563:62d4000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
stream 0x11c0a40.
2013-12-20
11:34:04.296 Lync[563:3a71018c] INFO APPLICATION CAlertReporter.cpp/117:Alert
cleared of Category 1, Type 201, cleared 0 alerts
2013-12-20
11:34:04.297 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/725:Response received for req.
GET-AuthenticatedUserGetRequest(0x1201ab8): E_ConnectionTimeoutError (E2-2-5)
(RemoteNetworkTemporaryError); Done with req.; Stopping resend timer
2013-12-20
11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioUtil.mm/322:stopSound
2013-12-20
11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioUtil.mm/322:stopSound
2013-12-20
11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioUtil.mm/322:stopSound
2013-12-20
11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioVideoToastViewController.mm/992:Cancelling
local notification
2013-12-20
11:34:04.299 Lync[563:6d00000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
stream 0x125fa90.
2013-12-20
11:34:04.300 Lync[563:3a71018c] INFO UI CMRootViewController.mm/378:ActualState
= 0 DesiredState = 2 DataAvailable = 0
2013-12-20
11:34:04.300 Lync[563:3a71018c] INFO UI
CMDetailViewController.mm/229:ActualState = 0 DesiredState = 1 DataAvailable = 0
2013-12-20
11:34:04.300 Lync[563:3a71018c] INFO UI CMDetailViewController.mm/262:ActualState
= IsSignedOut DesiredState = BeSignedIn DataAvailable = 0 Showing UI =
CredentialTableViewController
2013-12-20
11:34:04.300 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
view is alert, size 1
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/745:adding the
desired view
2013-12-20
11:34:04.302 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
floating views
2013-12-20
11:34:04.302 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert
is 1
2013-12-20
11:34:04.302 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/114:showalert
is 0
2013-12-20
11:34:04.302 Lync[563:3a71018c] INFO UI CMUIUtil.mm/402:Mapping error code =
0x22020005, context = , type = 201
2013-12-20 11:34:04.303 Lync[563:3a71018c] INFO UI
CMUIUtil.mm/1680:Mapped error message is 'Non riesco a connettermi al server
perché potrebbe essere occupato o temporaneamente non disponibile. Riprova.
2013-12-20
11:34:04.304 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/89:before: view height 1024.000000, width
45.000000, x 64.000000, y 0.000000
2013-12-20
11:34:04.304 Lync[563:3a71018c] INFO UI
CMNotificationManager.mm/1089:viewFrame: origin x 64.000000, origin y 0.000000,
height 1024.000000, width 45.000000
2013-12-20
11:34:04.304 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1195:resize
alert label, origin x 44.000000, origin y 2.000000, height 41.000000, width
936.000000
2013-12-20
11:34:04.305 Lync[563:3a71018c] ERROR UI CMDismissButtonBaseViewController.mm/104:after:
self.label.frame height 41.000000, width 936.000000, x 44.000000, y 2.000000
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.306 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
view is alert, size 1
2013-12-20
11:34:04.306 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/718:desired
view is same as the current view
2013-12-20
11:34:04.306 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
floating views
2013-12-20
11:34:04.306 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert
is 0
2013-12-20
11:34:04.306 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/89:before: view height 1024.000000, width
45.000000, x 64.000000, y 0.000000
2013-12-20
11:34:04.307 Lync[563:3a71018c] INFO UI
CMNotificationManager.mm/1089:viewFrame: origin x 64.000000, origin y 0.000000,
height 1024.000000, width 45.000000
2013-12-20
11:34:04.307 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1195:resize
alert label, origin x 44.000000, origin y 2.000000, height 41.000000, width
936.000000
2013-12-20
11:34:04.307 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/104:after: self.label.frame height
41.000000, width 936.000000, x 44.000000, y 2.000000
2013-12-20
11:34:04.337 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.337 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
view is alert, size 1
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/718:desired
view is same as the current view
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
floating views
2013-12-20
11:34:04.339 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert is
0
2013-12-20
11:34:04.339 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/89:before: view height 1024.000000, width
45.000000, x 64.000000, y 0.000000
2013-12-20
11:34:04.339 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1089:viewFrame:
origin x 64.000000, origin y 0.000000, height 1024.000000, width 45.000000
2013-12-20
11:34:04.339 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1195:resize
alert label, origin x 44.000000, origin y 2.000000, height 41.000000, width
936.000000
2013-12-20
11:34:04.339 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/104:after: self.label.frame height
41.000000, width 936.000000, x 44.000000, y 2.000000
2013-12-20
11:34:04.340 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/162:Details
Pane is in Full screen with controller
2013-12-20
11:34:04.340 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/204:Split view
frame orientation UIInterfaceOrientationLandscapeLeft Height = 748.000000 Width
= 1024.000000 origin.x = 20.000000 origin.y = 0.000000 keyboardHeight =
0.000000
2013-12-20
11:34:04.341 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/162:Details
Pane is in Full screen with controller
2013-12-20
11:34:04.341 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/204:Split view
frame orientation UIInterfaceOrientationLandscapeLeft Height = 748.000000 Width
= 1024.000000 origin.x = 20.000000 origin.y = 0.000000 keyboardHeight =
0.000000
2013-12-20
11:34:04.343 Lync[563:3a71018c] INFO UI
CMToolsViewController.mm/349:ActualState = 0 DesiredState = 1 DataAvailable = 0
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI
CMAlertViewController.mm/93:ObservableListItem Added event received
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/103:showalert
is 1
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
view is alert, size 1
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/718:desired
view is same as the current view
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
floating views
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert
is 1
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/114:showalert
is 0
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMUIUtil.mm/402:Mapping error code =
0x22020005, context = , type = 201
2013-12-20
11:34:04.346 Lync[563:3a71018c] INFO UI CMUIUtil.mm/1680:Mapped error message
is ‘Cannot connect to the server because it could be busy or temporarily
unavailable. Retry.’Hi Kent,
thanks a lot for your reply!
I created _sip._tls.domain-ext.com SRV record in the external DNS and now autodiscovery works fine. At the beginning I had not created it because I thought lyncdiscover.domain-ext.com A record was enough for autodiscovery. I still cannot understand
why lyncdiscover.domain-ext.com points to reverse proxy, while _sip._tls.domain-ext.com points to Edge server. It's strange because both are part of the research order of Lync 2013 desktop clients.
By the way, mobility still does not work. I tried to insert bot the https URLs as manual configuration but Lync 2013 for iPad was not be able to login. I tried to paste both the URLs in the web browser and:
with https://<ExtwebFQDN>/Autodiscover/autodiscoverservice.svc/Root appears the "Root.json" file to be downloaded;
with https://<IntwebFQDN>/AutoDiscover/AutoDiscover.svc/Root
the message "500-Internal error of server" appears.
Any suggests from you about how to check the configuration of ISS/ARR 2.5?
Thanks again! -
Lync 2013 and Dell Latitude 7240 Window 8.1 Problem! Please help SOS
Hi guys,
Can anyone know the solution for my current problem with Lync is frozen and crashes when I start my video call. I have brand new Dell Latitude 7240 with Window 8.1 and Lync 2013. I have tried so many different suggestion from different forums and update
my Lync as well. However, the problem is still there :(
I have been experiencing this problem for almost 2 months. It would be great to get my Lync works with video call. I tested the camera both internal and external camera as well. They works fine with Skype, ect...But not with Lync
Thanks in advance!!!HI
I have seen 100 % laptops of dell which has issue with Lync, I tried to raise this Dell as per them is issue with Lync and even Mircrosoft global team said it dell laptop drivers issue, Some of the cases has been resolved by uninstalling Audio/video
drivers. but not for every laptop.
Regards
zahoor -
Lync 2013 and lync 2011 for mac (can not complete the call)
hi everyone
A brand new Lync 2013 installed and updated.
We are testing it on our LAN enviroment (no firewall issues).Our windows clients can sign in and can work very well with all options (audio ,video,conference ).BUt our mac clients (macbook pro with lync 2011 14.0.8 140321 ) cant make audio call
or video call.when they try to make it , it gives the following generic error ,cannot complete the call.
I enabled lync 2011 logging ,but also can not find the related log file also on the macbook.
One more info ,on macbookpro when we use the lync web app ,and we can make video and audio calls.
I tried to uninstall lync 2011 from macbook ,reinstall ...not worked
After the install tried to update ,the lync 2011 client step by step to the latest version ,But all microsoft lync 2011 updates are at the moment are to the latest version (14.0.8)h
THi,
As the issue happen only for Lync Mac client, so it should be the of Lync Mac client.
You can try to perform a Clean Uninstall for Mac Lync client and then test again.
Here is a link below:
http://support.microsoft.com/kb/2691870
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Lync 2013 and Raising Forest/Domain Functional Level?
My current forest and domain functional levels are 2008 R2. I know I can safely upgrade the functional levels in most cases, but I want to specifically know with regards to Lync.
Our entire environment, including Lync, is running on Windows Server 2012 R2. (We have no domain joined clients.) We are running Lync 2013 Standard with all the latest updates.
Can I safely raise the forest and domain functional levels to 2012 R2 without impacting Lync?Hi,
Yes, you can raise Forest and domain function level to Windows Server 2012 R2 without issue.
After raising Forest\domain function level, the new features that rely on the functional level are generally limited to AD itself. Regardless, changing the Domain or Forest Functional Level should have no impact on an application that depends on
Active Directory.
More details:
http://blogs.technet.com/b/askds/archive/2011/06/14/what-is-the-impact-of-upgrading-the-domain-or-forest-functional-level.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Lync 2013 and Sametime Same Domain
Deploying Lync within my Org and unfortunate for us we use sametime.
If the Lync 2013 deployment resides in mycompany.com, and thus is the sip domain. The sametime domain is also mycompany.com as this is historic.
Are there any Gotchas or can these both interact as normal using the XMPP Gateway. If you think of it like
[email protected] on lync talking to
[email protected] on sametime, I just wondered if there was any conflicts,
Any documents on setup would also be cool.
thanksThey should be fine independent, but if both need to talk to public XMPP networks, you'll need to pick either Lync or SameTime due to the DNS records for _XMPP-Server._tcp.
If they need to communicate with eachother via XMPP, this would also be difficult because they have the same SIP domain, the routing wouldn't work. They wouldn't know to send the communications via XMPP if they have the same SIP domain.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications -
Lync 2013 and problem with copy/paste from SQL Mgmt Studio.
Hi Everyone,
Recently one of ours programmers noticed a very interesting issue which is a real pain in the a## for him and his colleagues. It was all fine with Lync client 2010, problem started when moved some people to 2013 client.
When someone sends him a message with SQL Code, and he is pasting it into SQL mgmt std. he gets dashes "-" instead of spaces " ".
I thought this is a local PC issue, but:
1. On 2010 it worked, stopped all of a sudden when they changed lync client to 2013
2. They are pasting code on the SERVER not local SQL mgmt std. on their client machines
3. Even if I send him a code from Lync 2010 and he is pasting that from his 2013 client - he gets "-" dashes, so I guess it is not important from where I send the message, but from where he is copying it.
As for now, I have noticed that problem with guys from England and region of APAC - they have lync 2013 client already.
Really appreciate any help as I donot have any point where to start troubleshooting...
Cheers guys,Hi,
I test the issue with my colleague and didn't find the same issue.
Here is the screenshot:
So please check if Lync Server 2013 and all the issued Lync 2013 client update to the latest version firstly, it not update to the latest version, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Installing Lync 2013 and remove 2010 client via SCCM
We have Windows 7 x64 PC’s running Lync 2010 64-Bit client.
What I need to do is install the Lync 2013 32-Bit client and then uninstall the Lync 2010 64-Bit client.
Using the Office Customization Took, I am able to install the Lync 2013 client fine, however the 2010 client isn’t not removed.
Here is what I did:
-Have the standalone Lync 2013 installer.
I then copied the Lync 2010 64-bit install files into a new folder in the Lync 2013 source files.
This folder is c:\Lync2013\Lync2010
-Created MSP file using OCT set to never reboot.
-Under ‘Add installations and run programs’ option, I specified the Lync 2010 to be removed post install of Lync 2013.
The Command line: [post install] [INSTALLLOCATION]\Lync2010\LyncSetup.exe /silent /uninstall
-Loaded this into SCCM and set to run at a logon event.
As stated above, Lync 2010 is not removed.
A few questions:
Is this even possible using the OCT?
In the OCT, is it a problem trying to mix two different installers?
One 32-Bit, the other 64-Bit?
If not, then is the command line correct for the Lync 2010 uninstall?
If no for # 3, how do I make SCCM use the correct path to the package where the Lync 2010 install files are?
In the OCT, do I need to have the Lync 2010 command line as:
\%WINDIR%\SystemWOW64\CCM\Cache\nameofpackage
Please help me alleviate some frustration with any ideas for the above.You can use the command msiexec.exe /uninstall “C:\Program Files (x86)\OCSetup\Lync.msi” to uninstall Lync 2010.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
I'll try this, thanks! For the post uninstall of Lync 2010 using the OCT, should I also ad /quiet switch or /no restart to suppress dialog boxes and not restart the PC when the removal is complete? Or will the OCT prevent it from being restarted
and 'suppress modals' as I set this during the install of Lync 2013.
Maybe you are looking for
-
Time Machine from Snow Leopard missing in Lion
My time machine was working perfectly with Snow Lepoard and prior to my upgrade to Lion I turned off the time machine located on an external drive. After my successful upgrade to Lion including all my files and applications I wanted to use the Snow L
-
Many topics linked to Word files in RoboHelp 10
Is RoboHelp 10 robust enough to cope with a large project that has the majority of its topics linked to their own individual Word file?
-
Toshiba A60 USB 2.0 Host Controller, Can Anyone Help?
Hi everyone, I recentry purchased a new Toshiba Satellite A60 notebook. Of course, instantly I formatted it, and installed XP Pro, because I didn't need half the programs that the laptop comes installed with. Problem is now that all they gave me was
-
Wily Introscope destination.JCODestination in SapAgentConfig.xml in MDM
Hello, We are working to configure Wily Introscope on an MDM host. Goes ok until we view SapAgentConfig.xml. It should have an entry for: hostagent.destination.SocketDestination name="MDMSocketDestination" but instead it shows: hostagent.destination.
-
I have just purchased Teacher/Student version of Dreamweaver CS5.5. Autoplay didn't activate and there doesn't appear to be an .exe file on the CD. How do I install? Thanks Jean T