Lync 2013 and SQL 2012 on the same server

Hi,
I'm in the process of migrating Lync 2010 to Lync 2013. I have a clean install of Windows Server 2012 R2. Is it possible to install Lync 2013 and SQL 2012 on the same server or does it have to be on separate servers.
Thanks
P

Configure Separated SQL Server to use in an Enterprise deployment of Lync Server. Standard Edition servers use a collocated SQL Server Express version of SQL Server that is right sized for the workloads of a Standard Edition server.
Also you can refer below link
http://technet.microsoft.com/en-us/library/gg425848.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Similar Messages

SQL 2000 AND SQL 2005 ON THE SAME SERVER

Hi all ,
I have an installation of SAP4.7SR1 /MSSQL2000 on a windows 2003 server.
I want to install SAP SOLUTION MANAGER 4.0 /MSSQL2005 on the same server ... it is possible that two version of SQL ( 2000 and 2005 ) coexists on the same server ? It's sufficent to install SQL into two different directory ?
Thank's a lot.
Antonio Voce.

Hi,
yes it is possible to install SQL2000 and SQL2005 on same server but there are certain special considerations that you should be aware of
look at following blog
http://blogs.msdn.com/sqlblog/archive/2006/09/27/co-existence-of-sql-2005-with-sql-2000.aspx
also look http://msdn2.microsoft.com/en-us/library/ms143694.aspx
but in case of SAP Installation i prefered that to upgarde SQL2000 to SQL2005 then install solman 4.0
regards,
kaushal

Can we run 11g RAC and 12c RAC in the same server?

There is a requirement to run 11g RAC and 12C RAC in the same server for a year or so and then remove 11g RAC?
Current setup:
HP-unix 3 node RAC on 11g R2
4CPU
64 GB RAM
3 TB SAN storage
no ASM
Upgrade setup:
HP-unix 3 node RAC on 12C RAC
8CPU
128 GB RAM
6+ TB SAN storage
ASM
We are asked to use the same server and upgrade Hardware to install and run 12C RAC. What are the implications of running RAC in the same server/nodes?
Thank you for your time!

Hi,
The following table shows you the compatibility between various versions:
Clusterware
ASM
DB
Certified
12.1
12.1
12.1
Y
12.1
12.1
11.2(a)
Y
12.1
12.1
11.1(a)
Y
12.1
12.1
10.2(a)
Y
11.2
11.2(b)
11.2
Y
11.2
11.2(b)
11.1
Y
11.2
11.2(b)
10.2
Y
11.1
11.1
11.1(c)
Y
11.1
11.1
10.2
Y
11.1
11.1
10.1
Y
11.1
10.2
11.1
Y
11.1
10.2
10.2
Y
11.1
10.2
10.1
Y
11.1
10.1(d)
11.1
Y
11.1
10.1(d)
10.2
Y
11.1
10.1
10.1
Y
10.2
10.2
10.2
Y
10.2
10.2
10.1
Y
10.2
10.1(d)
10.2
Y
10.2
10.1
10.1
Y
10.1
10.1
10.1
Y
(a) Pre-12.1 database instances require an ASM instance resident on the same node as the database instance. Pre-12.1 database instances cannot leverage the implicit HA of Flex ASM.
Oracle Clusterware (CRS/GI) - ASM - Database Version Compatibility (Doc ID 337737.1)

Is it possible to install SharePoint 2013 and SQL 2012 on single Azure Virtual Machine

I had a Azure subscription, I need had created only one Virtual Machine, is it possible to install SharePoint 2013 and SQL Server 2012 on that single virtual machine in azure.
I had SharePoint 2013 and SQL Server 2012 licence from MSDN subscription,
Finally on Azure virtual machine is it possible to Install SharePoint 2013 and SQL server by downloading these software from MSDN.

Hi,
It is supported to install sharepoint 2013 and SQL server on the same server. However, please check the size of your Azure VM and make sure it is compatible for that.
The minimum recommended size for a virtual machine is A3 when using SQL Server Enterprise Edition. Select A3 or higher when using SQL Server Enterprise Edition. Select A4 when using SQL Server 2012 or 2014 Enterprise Optimized for Transactional Workloads
images. Select A7 when using SQL Server 2012 or 2014 Enterprise Optimized for Data Warehousing Workloads images. In addition, the default size for SharePoint 2013 image is A3.
In addition, as a best practice, you can install them in different servers and then deploy SharePoint 2013 with SQL Server AlwaysOn Availability Groups in Azure:
Deploying SharePoint 2013 with SQL Server AlwaysOn Availability Groups in Azure
http://msdn.microsoft.com/en-us/library/azure/dn275959.aspx
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

FMS 3.5 on Server 2012 R2 and with Wowza on the same server

Hi there,
Is it possible to have my old FMS 3.5 on the same server as I have Wowza 3.6 installed?
The server is windows Server 2012 R2.
I have installed the FMS, but it does not start up after installation, and the bat-files cannot start/stop the service either. It doesn't make a difference if I go to Services to start them up manually, the sample files still doesn't work.
Any suggestions?
Thanks in advance
HC

Hi Hans Christian RVN,
FMS 3.5 is not supported on Win 2012 R2. You may want to give it a spin on the supported platforms listed at https://www.adobe.com/support/documentation/en/flashmediaserver/357/FMS_357_Release_Notes. pdf.
~Ashish

SCCM - Branch Distribution point and Management point on the same server

Hi All,
Would like to know if any other SCCM roles like management point , distribution can be installed on the same server on which a branch distribution point is installed?
Rgs,

Hi,
Branch Distribution Points no longer exist in Configuration Manager 2012 and above.
I'm assuming you want to install additional roles on an existing server that is currently only acting as a Distribution Point and the answer is yes, this is possible, but it depends on which other roles you want to install and there will probably be some
prerequisites needed.
Can you elaborate on which roles you are considering installing?
Steven Hodson | http://www.stevenhodson.com | @_hodders

Problems with Sent mail and multiple accounts on the same server

I have 2 different email accounts that are on the same server. Regardless of the account from which I send the email, all of the sent messages end up in the same sent folder. Is there a way to force the sent messages to go into their correct Sent folder?

In the Finder, go to ~/Library/Mail/. With that folder open, do Edit > Select All (⌘A), then Edit > Copy (⌘C), and paste it in your reply to this post, to let me see the names of the files and folders present at the root level of the Mail folder.
Before actually posting that information, you may edit it so that the file/folder names do not reveal any details you wish to keep private, e.g. you may replace any real username with "username" to hide your real email address if you wish; similarly, you may disguise any domain names you don't want to be revealed. Try to be consistent in how you disguise those details, though, as we may need to refer to them in subsequent posts.
Now, go to ~/Library/Mail/Mailboxes/. With that folder open, repeat the process to let me see the names of the files and folders it contains. Again, you may disguise any mailbox names you wish to keep private. Be careful to not alter any suffixes, though.
Finally, for the two accounts involved in the problem, locate the account folders within ~/Library/Mail/ -- their name begins with the account type (POP, IMAP, Mac), followed by the account username and the incoming mail server. For each account folder, repeat the process to let me see the names of the files and folders it contains.
Note: For those not familiarized with the ~/ notation, it refers to the user's home folder. You can easily locate any of the folders referred to in this post by copying the file path here, doing Go > Go to Folder in the Finder, and pasting the file path there.

Can I install 9i database and 9i AS on the same server ?

Dear Forum,
We need to install Oracle 9i database(9.2.0.1.0) 64-bits
and Oracle 9i Application Server (9.0.2.0.1) on the same Server machine with the following features:
Machine: SunFire 6800, 4 CPU, 8 GB RAM
OS: Solaris 9 8/03
Is it possible?
Will we have problems or conflicts with the ports numbers?
Please, any aditional comments or recommendations will be welcome!!!!
Best regards,
Alfredo

Hi Alfredo,
If you are planning to install an infrastructure as part of your application server, you might run into a port conflict for the TNS listener. The easiest way of solving this is to move the non-infrastructure database listener to another port.
A number of things like these are handled automatically in later releases. You do know that 9.0.2 is old and desupported, right?
Regards,
Mathias

Outlook 2013 and Lync 2013 suddenly cannot run at the same time

We recently switched to Office 365 and up until this month's Tuesday Patch Day, everything was working great. As soon as I installed the patches from 3/12/2013. Ever since then I've had the following issue:
Launch Outlook 2013
Launch Lync 2013
Get the following dialog box: "Outlook Data File: The file <filename> is in use and cannot be accessed. Close any application that is using this file, and then try again. You might need to restart your computer."
Click Ok to dismiss the dialog box. Everything seems to function normally.
About three minutes later I get the following dialog box: "We're sorry, but Outlook has run into an error that is preventing it from working correctly. Outlook will need to be closed as a result. Would you like us to repair now?"
Click Close. Everything seems to function normally.
Steps taken to attempt to a fix:
I deleted the Outlook profile and recreated it from scratch. No improvement.
I rebooted the machine. No improvement.
I repaired the Outlook data file. No improvement.
Other notes:
If I start Outlook 2013 by itself, it works fine and no dialog boxes.
If I start Lync 2013 by itself, it works fine and no dialog boxes.

Hi all,
I had the same problem as the original poster, and I fixed it using the method I'm about to describe. First, let me state that I am using a volume-license version of Office 2013 Standard, installed the conventional way ... we are not using the desktop
apps available with Office 365 plans E3+E4 or "Midsize Business".
I had originally installed Lync 2013 using a 'streaming' installer that you find by logging into the Office 365 Portal site -> Office 365 Settings -> Software -> Lync -> Install.
That installer does not work with the version of Office 2013 I'm using. I uninstalled Lync, and reinstalled using the links below:
(32-bit):
http://www.microsoft.com/en-us/download/details.aspx?id=35451
(64-bit):
http://www.microsoft.com/en-us/download/details.aspx?id=35450
The version of Lync that you choose (32-bit or 64-bit) has to match the version of Office 2013 you already have installed. Upon installing the 64-bit version of Lync at the URL above, the error message "Outlook
Data File: The file <filename> is in use and cannot be accessed." disappeared and Outlook and Lync now happily cooperate.

Can I run office 2013 and Office 364 on the same computer?

My company is running Office 2013, Word, Excel, Project, Exchange and SharePoint.
I have a small business on the side and I was considering Office 365.
Is it possible to run both versions on the same machine without conflicts?
Valgardur Gudjonsson

Hi,
You can only run the click-to-run version of Office side-by-side with an earlier version of Office (say Office 2010) that is already installed on your computer.
Office 2013 MSI on a system with Office 365 (Click to Run) is NOT supported.
Regards,
Ethan Hua
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Internet Sales ISA (R/3 Edition) and SAP EP on the same server ?

We already have an SAP Portal (SAP EP) in place and we are planning to do a pilot deployment of the E-Selling R/3 Edition: is it technicaly possible to deploy then on the same SAP WAS server / cluster ?
If yes, what would be the limitation or reason motivating not to do it.
Thank you

Thank you for your answer!
How did you solve the SSO more specifically? You created an URL iView from scratch and assigned it to a specific system? Did you also to maintain any parameters or how did you get pass the login screen? Does that work automatically?
Furthermore, did you use the link ".../b2b/b2b/init.do" as URL or some other? Because I once saw one ending differently...
Kind regards,
Christine

IBCM internet and intranet management on the same server

Could anyone help me see what I am missing? We are trying to test setting up IBCM using the same management point as the intranet clients. We have already successfully implemented PKI for intranet clients because we were bringing in a MacBook Air. We have
an external URL coming through reverse proxy and forwarded to our internal server. I can navigate to
https://sccmext.domain.com/sms_mp/.sms_aut?MPlist and get 403 access denied I also get that when I am on prem and navigate to the local server
The CcmMessging.log has errors regarding post to
https://sccmext.domain.com/ccm_system/request failed with 0x87d00231
I think this has something to do with certificates... I have a SCCM Web certificate for the internal server hostname and another certificate for the external name coming through the reverse proxy.
I have the internet FQDN on the site system properties, MP and DP are set to allow internet and intranet based clients...

Here are some entries before and after that entry above:
10.7.29.195 GET / - 443 - 10.7.29.81 - 200 0 0 778 0
10.7.29.195 GET / - 443 - 10.7.29.82 - 200 0 0 778 0
10.7.29.195 GET / - 80 - 10.7.29.82 - 200 0 0 701 0
10.7.29.195 GET / - 80 - 10.7.29.81 - 200 0 0 701 0
10.7.29.195 GET / - 443 - 10.7.29.81 - 200 0 0 778 0
10.7.29.195 GET / - 443 - 10.7.29.82 - 200 0 0 778 0
10.7.29.195 CCM_POST /ccm_system/request - 443 - 10.7.29.9 ccmhttp 403 7 5 1466 15
10.7.29.195 GET / - 80 - 10.7.29.82 - 200 0 0 701 0
10.7.29.195 GET / - 80 - 10.7.29.81 - 200 0 0 701 0
10.7.29.195 GET / - 443 - 10.7.29.81 - 200 0 0 778 0
10.7.29.195 GET / - 443 - 10.7.29.82 - 200 0 0 778 0
These are from the IIS log file .195 is the SCCM site server, 81 and 82 are the reverse proxy servers. Sorry if I am not answering questions accurately, this is getting into parts of SCCM I am not familiar with at all.

Need urgent on installation of Spatial and R12 data in the same server

Hi
This is Hanumantha. I am getting problem with Geo Spatial data type objects manuplating from Apps.
Geo spatial data is installed in Navteq database in one server. R12 application is installed in another server. Through data base link in APPS, I am able to access Navteq tables data, procedures etc. But I can't manuplate the objects data like Varrays and object types from apps throgh db link from navteq.
Instead created the procedure which will decompose the object type to "primitive types" (number, date, varchar2,.) which is accessing from apps. But hz_locations , Geometry column will have data type SDO_GEOMETRY and I cant update with primitive data type (number, date, varchar2..).
Kindly please help us reconstucting to the SDO_GEOMETRY object using primitive data types.
OR
Is there any possiblity of installing Navteq database(GeoSpatial data) and R12 applications data together in the one server.
Could please any help on the above as soon as possible?
Thanks in Advance.
Thanks,
Hanumantha

Could you give me an example of this update rutine?

Crystal Report 8.5 and 9 installed on the same box

Is it possible to have Crystal Report 8 and 9 installed on the same server?

Hi Michael,
You can install Crystal Report 8.5 and 9 on same box.
However, there are chances that dll may conflict and few issues may occur.
Try to install on different harddrives.
Regards,
Shweta

Exchange 2013 Windows Server 2012 NLB and DAG on the same server

Hi all, I am installing Exchange 2013 infrastructure with two servers.
Both servers have the CAS and Mailbox roles.
For mounting on High Availability, will create a DAG.
Client Access I have no external Network Load Balancer.
I thought about installing the NLB servers in the DAG members, this could not be done before.
I do not know if in Windows Server 2012 and Exchange 2013
Can I install NLB on members of a DAG?
regards
Microsoft Certified IT Professional Server Administrator

Hi,
I’m afraid that WNLB and DAG cannot coexist in the same server. Because WNLB is incompatible with Windows failover clustering. If we're using an Exchange 2010 DAG and we want to use WNLB, we need to have the Client Access server role and the Mailbox server
role running on separate servers.
For more information, you can refer to the following article:
http://technet.microsoft.com/en-us/library/ff625247(v=exchg.141).aspx
Thanks,
Angela Shi
TechNet Community Support

Lync 2013 and SQL 2012 on the same server

Similar Messages

Maybe you are looking for