Lync 2013 client is showing EWS not deployed.

Hi,
I am facing issue with lync 2013 client in the configuration information. it is showing EWS not deployed .
UCS Connectivity State;      Exchange connection Down;           --;
MAPI Information;              Status OK;MAPI Status OK;
EWS Information;;             EWS not deployed;
I am facing this issue both internally and externally.
I am using Lync 2010 server and exchange 2010.
Lync  2010 client is showing all EWS information correct. No issue with lync 2010 client.
Thanks 

Had the same issue.  Couple of things you can try:
1.  Verify EWS virtual directory is configured properly on your Exchange CAS or Front-End servers (Get-WebServicesVirtualDirectory)
But the thing that fixed it for me was:
2.  Create SRV records for (_autodiscover, _TCP, 443) pointing to your CAS or Front-End server/array.  This has to be done for the forward zone of your public domain name (i.e. contoso.com, not contoso.local).  I did them both just
to be on the safe side, but was the public domain that did it.

Similar Messages

  • Lync 2013 client still show titles that is turned off on Lync 2010 server

    Hi All
    I have another unique issue it seems.
    Environment - Lync Server 2010 on CU5. Lync 2010 and Lync 2013 client.
    The client has used absconfig and removed the titles as the don't want that to be displayed.
    The lync 2010 clients does not show the titles - so that is working.
    Lync 2013 from external access the titles does not show - so that is working.
    Internally on the LAN the Job Titles shows on the Lync 2013 client - so not working.
    What I've tried so far :
    Disabled exchange contact sync on a client policy
    Used webdownload only for address book.
    Using registry to force download of address book.
    Deleted the Lync folder on the client computer to make sure when it downloads the .idx and .db file that it is the latest version.
    None of the above remediations seems to have any impact on the lync 2013 client.
    I have tried to replicate this in my lab (without an exchange server) and the the lycn 2010 and 2013 clients behave as they should be not displaying the job titles.
    Having anyone come across this before?
    I will be patching the lync 2010 server to the latest CU update, but I think the issue is somewhere else.
    Any suggestions will be appreciated.
    Regards
    Danie

    Hi Danie,
    I suggest you could install the latest CU update first, because the CU update would fix many problems.
    In addition, shall we test Lync 2013 on a fresh computer without Outlook?(You could test this using Lync 2013 Basic).
    Best regards,
    Eric

  • Lync 2013 client is deployed but user accounts are not migrated from OCS to Lync 2013 Server - how to open Lync meetings automatically in the Lync Web Plug-in

    We have in our enterprise the following scenario:
    1 - Lync 2013 client is installed
    2 - User accounts are not migrated to Lync 2013 Server, users are using Office Communicator as their main tool
    3 - Users receive Lync 2013 meeting requests but when try to access them, Lync 2013 client launches and shows error. Users will need to open the browser and paste the URL to the address bar but this still open
    4 - We cannot use the workaround of adding "?SL=1" to the Lync 2013 meeting URL as the user base is large and manual workaround is not accepted
    5 - Question: is there any automated way, via egistry key or GPO setting, so that users temporarily (until their accounts are migrated to Lync 2013 server) can bypass Lync 2013 client completely and automatically open all Lync 2013 meetings
    on the browser, using Lync Web Plug-in?

    Thanks for the response,
    First, I should have mentioned clearly that users have Office Communicator 2007 client and Lync 2013 client installed in their machines. Their accounts are not migrated yet to Lync 2013 server.
    Second, we are using IE9 and IE10. The issue is that users CAN join Lync 2013 meetings with their browsers but have to paste the URL manually to browser and add "?SL=1" otherwise, if they just click at the "Join Online Meeting" or "Join
    Lync Meeting" URL it launches Lync 2013 client which shows error because is not configured yet, as they are using OCS client and migrating slowly to Lync 2013 server.
    Is there a Group Policy setting or a registry key from Microsoft that can be turned on to these users machines and make will all Lync meeting requests to be opened in IE browser instead of Lync 2013 client. We need a way to ignore
    Lync 2013 client until user accounts are migrated to Lync 2013 Server. Manually typing URLs is not an option in a big organization, can't explain thousands of users of different levels what to do.
    We are regretting the decision not to separate Lync 2013 from Office 2013 package we deployed recently. If Lync 2013 is uninstalled then all Lync meeting requests are opened in browser without an issue.

  • Lync 2013 - EWS not deployed external

    Greetings!
    Is there a way how to track the reason why Lync2013 client connecting over EDGE has status of EWS not deployed?
    Lync 2013 Standard FE
    Lync 2013 Edge
    TMG
    Exchange 2010
    Have followed this instructions:
    http://www.b4z.co.uk/lync-2013-ews-with-forefront-tmg-2010-issues.html/comment-page-1
    On the TMG rules: Outlook web access, Outlook anywhere, I have deleted /autodiscover/* and /ews/* path and created a new rule,
    which is connecting to a public addresses: autodiscover.company.com and owa.company.com, and on firewall rule under authentication tab selected: No delegation but client may authenticate directly.
    Created also a new listener which has: No authenticaton.
    PROBLEMS:
    Before doing that we had a problem that Lync2013 client connecting outside LAN got a pop-up credentials and no matter what you have typed, it didn't accept it.
    Now credentials pop-up is not appearing anymore, but the status of EWS is not deployed.
    And we are also having another problem because we had deleted EWS and AUTODISCOVER on Outlook Web access firewall rule and on Outlook anywhere, now Outlook clients
    connecting outside LAN without VPN are unable to get OOF working.
    Any hints?
    bostjanc

    Hi Lisa!
    Thank you for your reply.
    Output of the command: Get-AutodiscoverVirtualDirectory -Server FQDN | fl name,InternalURL,ExternalURL
    Name        : Autodiscover (Default Web Site)
    InternalUrl :
    https://owa2010.company.com/autodiscover/autodiscover.xml
    ExternalUrl :
    https://owa2010.company.com/autodiscover/autodiscover.xml
    Domain username is: [email protected]
    SIP address is: [email protected]
    Output of the command Get-WebServicesVirtualDirectory -Server FQDN | fl name,InternalURL,ExternalURL
    Name        : EWS (Default Web Site)
    InternalUrl : https://owa2010.company.com/EWS/exchange.asmx
    ExternalUrl : https://owa2010.company.com/EWS/exchange.asmx
    A record for autodiscover.company.com is created in EXTERNAL DNS and is pointing to a newly created Firewall rule on TMG, which has /autodiscover/* and /ews/* paths,
    no authentication (it passes the authentication to Exchange 2010).
    There is no SRV record in External DNS if that is important?
    Lync2010 client connecting external is also having EWS shown as not deployed.
    QUESTION:
    QUESTION1:
    I have a question regarding your statement: "Make sure you have configured the CAS Server Certificates including all SAN Names for all SMTP and SIP domains."
    On TMG side I have two rules for LYNC and I want to clarify something about the certificates.
    1 rule is for MEET NOW links and MOBILITY. This rule has /* path, no authentication and it leads to lyncFE ip address. This rule is for Lync reverse proxy which is
    visible on external DNS as lyncproxy2010.company.com. Rule is using certificate with this SAN names:
    DNS Name=lyncproxy2010.company.com
    DNS Name=meet.company.com
    DNS Name=lyncdiscover.company.com
    DNS Name=autodiscover.company.com
    DNS Name=dialin.domain.local
    2nd rule on TMG is newly created Firewall rule
    for solving EWS problem for Lync 2013. It has /autodiscover/* and /ews/* paths,no authentication (it passes the authentication to Exchange 2010).
    This rule is pointing to public address: autodiscover.company.com and to public address owa2010.company.com. Rule is using the sam certificate as we use it in other firewall rules for Outlook web access, Outlook anywhere and ActiveSync. Certificate has this
    SAN names:
    DNS Name=owa2010.company.com
    DNS Name=exchange.company.local
    DNS Name=exchange.company.com
    DNS Name=exchange
    DNS Name=autodiscover.company.local
    DNS Name=autodiscover.company.com
    Ok, my newly rule does not have lyncproxy2010.company.com should it have? It also does
    not have lyncdiscover.company.com should it have?
    QUESTION2:
    Is EWS internal/external url
    case sensitive?
    QUESTION3:
    With creating a newly rule for LYNC where ews and autodiscover are not authenticated on TMG side I have also removed path's /EWS/* and /AUTODISCOVER/* on rules for Outlook anywhere on TMG. Now we have problem that free/busy status ain't working
    external in Outlook clients.
    Soo, fixing pop-up credentials for Lync 2013 is partly solved, because credential window ain't appearing anymore, but EWS is still shown as not deployed, on the other side we have "created" another problem with OOF Outlook external. Any hints?
    with best regards,
    bostjanc

  • Lync 2013 client ews has not fully initialized

    Hello
    I have Lync 2010 server and Lync 2013 client. whenever Lync 2013 client logs in from outside(external) I get a exchange authentication pop up. and when I checked the status of lync - it says ews is not fully initialized. lync 2013 client works fine
    from inside.  If I use lync 2010 client from outside than it works fine, no pop up and ews status is ok. so I know that my TMG rules are accurate but something wrong with lync 2013 client itself.  I have upgraded the client to the latest update. 
    Also I have tried various combinateion of this below registry fix without any success.
    also Microsoft remote connectivity analyzer test is clean.  no errors.
    http://uclobby.com/2014/01/03/lync-client-2013-ews-has-not-fully-initialized/
    any thoughts?
    thanks

    Hi 
    Can you try clearing the user local cache SIP folder  who logs in externally and see the results
    User\App Data\Microsoft\Office 15\lync\SIP
    Is your SIP domain different from your domain name
    If it is so you can try by adding the SMTP Domain as trusted using the following cmdlet:
    reg add HKLM\Software\Policies\Microsoft\Office\15.0\Lync /v TrustModelData /t REG_EXPAND_SZ /d <SMTP Domain> /f
    If it is for multiple users you can also try the below  article
    http://technet.microsoft.com/en-us/library/gg398920.aspx
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
    (MVP)

  • Outlook contact not added Email do not show all information i Lync 2013 Client

    I have seen if no Email address is added into contact personen I only get emty Card of user i Lync 2013.
    When I add Email adr. into contact person and wait a littel then user get all information right i Lync 2013 user Card.
    IS this right or should it also showing user and all information from Outlook contact Card into lync 2013 client Card?

    Lync aggregates contact data from Microsoft Exchange GAL, Outlook and Microsoft Lync Server.
    So you can see information from outlook in Lync user card.
    Lisa Zheng
    TechNet Community Support

  • User search from "Find Someone" in Lync 2013 client does not show contact availability

    Running Lync 2013 Client / Server, when a user searches in the "find someone" field, contact names are returned, but the contact's presence status shows "Updating..." and never populates with the users presence.  If you then select
    a name from the search and open an IM session with them, the presence data is there and is accurate.  I think this feature used to work fine.  

    Hi,
    Did the issue happen only for you or for multiple users?
    Please enter the sip address instead of the name of the user in the “find someone” field to test the issue.
    Please also run Update-CsUserDatabase on FE server then remove Lync client profile to test the issue.
    User profile path: <user profile>\AppData\Local\Microsoft\Office\15.0\Lync\
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Lync 2013 client deployment via SCCM with silent uninstall of Communicator / Live Meeting / Plugin

    Hi
    We are rolling out Lync 2013 across our org to many remote sites and are wondering the best approach for this.
    We hope to leverage our SCCM, but so far we've only been installing Lync manually in our local test group.
    I noticed that when installing Lync, it doesn't remove Communicator, Live Meeting, or the Live Meeting plugin for Outlook though.
    Ideally, we would want to be able to push Lync 2013 client (standalone version, not Office 2013 Suite) via SCCM as well as uninstall Communicator 2007 R2, Live Meeting 2007 and Conferencing Add-in for Microsoft Office Outlook, all silently. Whether this
    can be done while the user is logged in and using Outlook/Communicator, I am unsure (probably not), so doing this overnight with users logged off but machines on would probably work best.
    Is there any documentation / guides from MS or other blog sites that have gone through this same process? From the searching I've done, it doesn't seem to be too common for a large deployment / jump from OCS 2007 to Lync 2013 on-premise.

    Hi,
    refer to this article it might help
    http://social.technet.microsoft.com/Forums/lync/en-US/cf9ca58c-b9e8-465c-afb4-ed3992092f81/lync-2013-client-silent-installation
    also did you try using Group Policy?
    http://blogs.technet.com/b/mir/archive/2011/06/04/how-to-automate-lync-client-2010-deployment-in-multi-architect-environment-using-active-directory-group-policy.aspx
    hope this help
    If you find this helpful
    please click "Vote as Helpful" if it answered your question please click "Mark as Answer"
    Mostafa Eltohamy
    Blog: http://Lyncdude.com  Twitter:
      LinkedIn:
      XING:

  • Deploying Lync 2013 client and SCCM Detection method

    So I am deploying the stand alone Lync 2013 client via SCCM 2012 R2, I have used OCT to create a .MSP, and I am trying to import it into SCCM.  However, I am curious as to what others are using for the Detection method?  Normally I would just
    use the MSI code, but since there is no single MSI, that is not possible with this particular version?  I'm not sure what the best method would be, Option 1 is to find a registry key that is installed by Lync, or Option 2, use a file, maybe Lync.exe under
    the Program Files?

    From the testing I've done Lync creates this reg location...
    HKLM>Software>Microsoft>Office>15.0>Lync
    Try using one of the keys in there, or you could use the file version but not sure if this would change with updates.

  • Lync 2013 client not finding audio device

    I've got a problem with the Lync 2013 client on Windows 7 x64 Ent that's  giving me a real headache, please help!
    It's the 32-bit version (15.0.4535.1002) downloaded with Office 365 Pro Plus and it's refusing to pick up my USB headset/microphone - a Plantronics Blackwire C320-M. The message I get in Lync Tools|Audio Device is "We didn't find an audio device,
    which you need for calling"
    First and foremost, the device is working with the Lync 2010 64-bit client without issue
    (I've not yet de-installed it) and is showing as working correctly in my Device Manager.
    I'm aware of a few similar threads here and elsewhere where this has been seen, so I've tried the following advice:
    1. Tried a different Headset (Plantronics C310-M)
    2. Installed all MS Office 2013 updates
    3. Reset all Generic USB and USB Root Hubs listed in Device Manager USB Controllers
    4. Disabled "Allow the computer to turn of this device to save power" for each of the above USB Controllers
    5. Uninstalled and reinstalled USB controllers above
    6. Removed old/stale USB drivers using 3rd party tool (USBDView)
    7. Multiple restarts of my HP Compaq Pro 6300 Micro Tower PC!
    None of the above has made any difference. Any helpful suggestions very gratefully received!
    Thanks
    Paul

    Update:
    Whilst browsing through the Windows App Event Log, I found these two entries:
    Log Name: Application
    Event ID: 1
    Source: Lync
    The description for Event ID 1 from source Lync cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    Log Name: Application
    Event ID: 12
    Source: Lync
    The description for Event ID 12 from source Lync cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    Lync
    I tried both a "Repair" and "Online Repair" in Control Panel | Programs and Features | Office 365 Pro Plus. The events still appear when starting Lync 2013.

  • Lync 2013 Client Not Display Numbers in Contact Card

    Hi
    I have a problem where Lync 2013 client connecting to Lync 2010 backend appears not download the contact list completely. Lync 2010 clients are all operating normally.  On Lync 2010 client, you can view all contact details including Enterprise Voice
    numbers and cell numbers for all users. However on Lync 2013 clients, Lync contact details for some users do not populate completely. In most cases, Enterprise numbers/Work Numbers/Mobile Numbers are missing.  If the contact is pinned then the details
    are retrieved.
    In cases where Work/Voice/Cell numbers are not displayed, affected users is limited to making lync to lync  calls only. The user can still dial the number  and get through without any issues.
    I have deleted and contacts cache on Lync 2013 but this has not helped.
    Regards

    Hi,
    How about check the contact of “Outlook Test” user from the Lync 2010 client?
    According to the second screenshot, since it’s an external account, the information will be limited.
    Thanks,
    Simon Wu
    TechNet Community Support

  • Dial-In Conferencing page does not open from Lync 2013 client

    Hello Everyone,
    I am facing this strange issue with my Lync Clients. All the users started experiencing the same behavior. So, I think this has something to do at the Server side.
    Earlier, when trying to open the Dial-in conferencing settings from the Lync Client (Tools --> Dial-in conferencing settings), it would automatically open the Dial-In conferencing settings in a new web page. But, recently this is not happening. The strange
    thing is I will be able to open the dial-in conferencing settings manually from a web browser by typing in the URL.
    Has anyone experienced similar issues in the past? I would appreciate any ideas regarding this from your part so that I can try to resolve this. Thanks in advance.

    Hi,
    Try to rerun Step 2-Setup or Remove Lync Server Components and then test again.
    Check if Lync Address Book update to the latest status.
    Make sure all Lync 2013 client update to the version.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Lync 2013 Clients in Child Domain Log "The server returned HTTP status code '403 (0x193)' with text 'Forbidden'."

    Hey All, I am really stumped on this one. 
    Environment - Is using split DNS
    Forest Root Domain - Contains new Lync 2013 Server Standard, ADDS, DNS, Enterprise CA, Workstations
    Clients in this domain connect and work beautifully. No errors. 
    Child Domain - ADDS, DNS, Workstation, Lync 2013 client
    Client autodiscovers, and then asks for a password. Enter the password and this comes up...
    Can't sign in to Lync, You didnt get signed in, It might be your sign-in address or logon credentials..  blah blah blah" 
    Client log shows 
    Error:
    There was an error communicating with the endpoint at 'https://domainlync13srv.Domain.net/WebTicket/WebTicketService.svc'.
    The server returned HTTP status code '403 (0x193)' with text 'Forbidden'.
    The server understood the request, but cannot fulfill it.
    As far as i can tell certificates are correctly configured with all the SAN's possible in my forest. The user is correctly set up in Lync control panel. Autodiscovery seems to be working as it should. EWS is working correctly. 
    Repaired client, removed cached creds, has all lync 2013 updates no dice
    Thank you all! 

    I am an IDIOT. 
    I did not prepare the child domain with the LYNC setup tool. Logged on to a file server in the child domain with domain admin rights and sure enough the setup said the domain was "partial". Ran the setup and bam it all started working. 

  • App V 5.0 Sequence - Lync 2013 Client

    Hello,
    Could you please help me find sequencing steps to virtualize Lync 2013 Client (Basic/Enterprise) using App-V 5.0 SP2?
    Regards,
    Srinivasa Prasad

    Follow that link for advice on how to download Office click-to-run and convert it to an App-V package...
    When I did this, I set the Product ID in the CustomConfig.xml file as ProPlusVolume and used ExcludeApp tags to exclude all apps except for Lync:
    Access
    Excel
    Groove
    InfoPath
    OneNote
    Outlook
    PowerPoint
    Project
    Publisher
    SharePointDesigner
    Visio
    Word
    Here is the info on how to configure this file:
    http://technet.microsoft.com/library/jj219426(v=office.15).aspx
    I believe it is also possible to set the Product ID to Lync, but not sure of the exact value to set and I have not tried this myself. Bonus tip - when you deploy Lync 2013 virtually, the plugins automatically integrate with the locally installed copy of
    Outlook!
    Dan Gough
    UK App-V MVP
    packageology.com
    @packageologist
    LinkedIn

  • Silent Uninstall lync 2013 client

    Hi,
    i try to uninstall Lync 2013 Client silently but no matter what i try Lync won't uninstall.
    maybe someone can explain me what i'm doing wrong
    I tried the recommended command
    copy "%~DP0uninstall_lync.xml" "%COMMONPROGRAMFILES(x86)%\microsoft shared\OFFICE15\Office Setup
    Controller\uninstall_lync.xml"
    "%COMMONPROGRAMFILES(x86)%\microsoft shared\OFFICE15\Office Setup Controller\setup.exe" /uninstall LYNCENTRY /dll OSETUP.DLL /config "%COMMONPROGRAMFILES(x86)%\microsoft shared\OFFICE15\Office Setup Controller\uninstall_lync.xml"
    Config File
    <Configuration Product="LYNCENTRY">
    <Display Level="None" AcceptEULA="TRUE" />
    <Setting Id="SETUP_REBOOT" Value="NEVER" />
    <Logging Type="standard" Path="c:\windows\log\" Template="Microsoft Office Lync Uninstall(*).log" />
    </Configuration>
    Log:
    2014/11/24 14:49:11:039::[4844] PERF: TickCount=11665520 Name=OBootStrapper::Run Description=Begin function
    2014/11/24 14:49:11:040::[4844] Operating System version: 6.1.7601 Service Pack 1. Platform ID: 2
    2014/11/24 14:49:11:040::[4844] Running 32-bit setup on a 64-bit operating system.
    2014/11/24 14:49:11:040::[4844] Command line: "C:\Program Files (x86)\Common Files\microsoft shared\OFFICE15\Office Setup Controller\setup.exe" /uninstall LYNCENTRY /dll OSETUP.DLL /config "C:\Program Files (x86)\Common Files\microsoft shared\OFFICE15\Office Setup Controller\uninstall_lync.xml"
    2014/11/24 14:49:11:040::[4844] Parsing command line.
    2014/11/24 14:49:11:040::[4844] Config XML file specified: C:\Program Files (x86)\Common Files\microsoft shared\OFFICE15\Office Setup Controller\uninstall_lync.xml
    2014/11/24 14:49:11:040::[4844] Uninstall requested for product: LYNCENTRY
    2014/11/24 14:49:11:040::[4844] Parsing config.xml at: C:\Program Files (x86)\Common Files\microsoft shared\OFFICE15\Office Setup Controller\uninstall_lync.xml
    2014/11/24 14:49:11:060::[4844] Preferred product specified in config.xml to be: LYNCENTRY
    2014/11/24 14:49:11:060::[4844] Parsed setting: SETUP_REBOOT with value: NEVER in config.xml.
    2014/11/24 14:49:11:060::[4844] Logging type standard specified in config.xml.
    2014/11/24 14:49:11:060::[4844] Log directory: c:\windows\log\ specified in config.xml
    2014/11/24 14:49:11:060::[4844] Log file template: Microsoft Office Lync Uninstall(*).log specified in config.xml
    2014/11/24 14:49:11:060::[4844] Display level none specified in config.xml.
    2014/11/24 14:49:11:075::[4844] Using setup controller dll at location [C:\Users\ADMIN_~1\AppData\Local\Temp\Setup00000214\OSETUP.DLL].
    2014/11/24 14:49:11:075::[4844] Verify file signature in "C:\Program Files (x86)\Common Files\microsoft shared\OFFICE15\Office Setup Controller\Setup.exe"
    2014/11/24 14:49:11:129::[4844] C:\Program Files (x86)\Common Files\microsoft shared\OFFICE15\Office Setup Controller\Setup.exe is trusted.
    2014/11/24 14:49:11:129::[4844] Verify file signature in "C:\Users\ADMIN_~1\AppData\Local\Temp\Setup00000214\OSETUP.DLL"
    2014/11/24 14:49:11:198::[4844] C:\Users\ADMIN_~1\AppData\Local\Temp\Setup00000214\OSETUP.DLL is trusted.
    2014/11/24 14:49:11:296::[4844] Using setup controller dll at [C:\Users\ADMIN_~1\AppData\Local\Temp\Setup00000214\OSETUP.DLL].
    2014/11/24 14:49:11:296::[4844] PERF: TickCount=11665785 Name=OBootStrapper::Run Description=Calling RunSetup
    2014/11/24 14:49:11:302::[4844] PERF: TickCount=11665785 Name=RunSetup Description=Begin function
    2014/11/24 14:49:11:303::[4844] WER element [P2] is set to value [OSETUP.DLL]
    2014/11/24 14:49:11:303::[4844] WER element [P3] is set to value [15.0.4569.1503]
    2014/11/24 14:49:11:304::[4844] Catalyst execution began: 11/24/2014 14:49:11.
    2014/11/24 14:49:11:305::[4844] Parsing config.xml at: C:\Program Files (x86)\Common Files\microsoft shared\OFFICE15\Office Setup Controller\uninstall_lync.xml
    2014/11/24 14:49:11:307::[4844] Preferred product specified in config.xml to be: LYNCENTRY
    2014/11/24 14:49:11:307::[4844] Parsed setting: SETUP_REBOOT with value: NEVER in config.xml.
    2014/11/24 14:49:11:307::[4844] Logging type standard specified in config.xml.
    2014/11/24 14:49:11:307::[4844] Log directory: c:\windows\log\ specified in config.xml
    2014/11/24 14:49:11:307::[4844] Log file template: Microsoft Office Lync Uninstall(*).log specified in config.xml
    2014/11/24 14:49:11:307::[4844] Display level none specified in config.xml.
    2014/11/24 14:49:11:308::[4844] Setupexe Resiliency Mode is set to [PerformIfApplicable]; thus Resiliency is [enabled] for the [UninstallExecutionMode]
    2014/11/24 14:49:11:308::[4844] Ensuring the install-state of setup controller files for product [LYNCENTRY].
    2014/11/24 14:49:11:308::[4844] Warning: Product registation information for 'LYNCENTRY' not detected. ErrorCode: 1011(0x3f3). Failed attempt to force-repair setupexe boot files.
    2014/11/24 14:49:11:308::[4844] Searching for default versions of resource files under the folder [C:\Program Files (x86)\Common Files\microsoft shared\OFFICE15\Office Setup Controller].
    2014/11/24 14:49:11:328::[4844] Found [1] resource files under the default folder.
    2014/11/24 14:49:11:328::[4844] Running in [UninstallExecutionMode]. Run from TEMP folder at [C:\Users\ADMIN_~1\AppData\Local\Temp\Setup00000214].
    2014/11/24 14:49:11:345::[4844] Loaded resource file [C:\Users\ADMIN_~1\AppData\Local\Temp\Setup00000214\OSETUPUI.DLL] (CultureTag=de-DE).
    2014/11/24 14:49:11:345::[4844] WER element [SuppressModal] is set to value [false]
    2014/11/24 14:49:11:346::[4844] WER element [P1] is set to value [15.0.4569.1503]
    2014/11/24 14:49:11:346::[4844] Loaded Dll : C:\Users\ADMIN_~1\AppData\Local\Temp\Setup00000214\OSETUP.DLL.
    2014/11/24 14:49:11:346::[4844] Catalyst version is : 15.0.4569.1503
    2014/11/24 14:49:11:346::[4844] JobExecutionMode is UninstallExecutionMode.
    2014/11/24 14:49:11:547::[4844] Opening registry key: HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Office15.LYNCENTRY.
    2014/11/24 14:49:11:547::[4844] Opening registry key: HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Office15.LYNCENTRY.
    2014/11/24 14:49:11:548::[4844] IsProductTransitionToMModeSafe: An exception was caught, therefore transition to MMode is unsafe for product:
    2014/11/24 14:49:11:548::[4844] Error: Product is not installed, therefore transition to MMode is unsafe for product: LYNCENTRY Type: 27::InstalledProductStateCorrupt.
    2014/11/24 14:49:11:548::[4844] Ensuring the install-state of setup controller files for all Products.
    2014/11/24 14:49:11:548::[4844] Opening registry key: SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall.
    2014/11/24 14:49:11:549::[4844] Ensuring the install-state of setup controller files for product [LYNC].
    2014/11/24 14:49:11:549::[4844] Opening registry key: HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Office15.LYNC.
    2014/11/24 14:49:11:549::[4844] Opening registry key: HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Office15.LYNC.
    2014/11/24 14:49:11:549::[4844] Ensuring the install-state of setup controller feature[SetupControllerFiles] for product[{90150000-002A-0407-1000-0000000FF1CE}].
    2014/11/24 14:49:11:549::[4844] Product INSTALLSTATE for ProductCode '{90150000-002A-0407-1000-0000000FF1CE}' is '5'.
    2014/11/24 14:49:11:549::[4844] Feature INSTALLSTATE for Feature 'SetupXmlFiles' is '3'.
    2014/11/24 14:49:13:038::[4844] Ensuring the install-state of setup controller feature[SetupControllerFiles] for product[{90150000-002A-0000-1000-0000000FF1CE}].
    2014/11/24 14:49:13:038::[4844] Product INSTALLSTATE for ProductCode '{90150000-002A-0000-1000-0000000FF1CE}' is '5'.
    2014/11/24 14:49:13:038::[4844] Feature INSTALLSTATE for Feature 'SetupXmlFiles' is '3'.
    2014/11/24 14:49:15:639::[4844] Ensuring the install-state of setup controller feature[SetupControllerFiles] for product[{90150000-006E-0407-0000-0000000FF1CE}].
    2014/11/24 14:49:15:639::[4844] Product INSTALLSTATE for ProductCode '{90150000-006E-0407-0000-0000000FF1CE}' is '5'.
    2014/11/24 14:49:15:639::[4844] Feature INSTALLSTATE for Feature 'SetupXmlFiles' is '3'.
    2014/11/24 14:49:18:424::[4844] Ensuring the install-state of setup controller feature[SetupControllerFiles] for product[{90150000-001F-0410-0000-0000000FF1CE}].
    2014/11/24 14:49:18:424::[4844] Product INSTALLSTATE for ProductCode '{90150000-001F-0410-0000-0000000FF1CE}' is '5'.
    2014/11/24 14:49:18:424::[4844] Feature INSTALLSTATE for Feature 'SetupXmlFiles' is '3'.
    2014/11/24 14:49:20:222::[4844] Ensuring the install-state of setup controller feature[SetupControllerFiles] for product[{90150000-001F-0407-0000-0000000FF1CE}].
    2014/11/24 14:49:20:222::[4844] Product INSTALLSTATE for ProductCode '{90150000-001F-0407-0000-0000000FF1CE}' is '5'.
    2014/11/24 14:49:20:222::[4844] Feature INSTALLSTATE for Feature 'SetupXmlFiles' is '3'.
    2014/11/24 14:49:21:766::[4844] Ensuring the install-state of setup controller feature[SetupControllerFiles] for product[{90150000-001F-040C-0000-0000000FF1CE}].
    2014/11/24 14:49:21:767::[4844] Product INSTALLSTATE for ProductCode '{90150000-001F-040C-0000-0000000FF1CE}' is '5'.
    2014/11/24 14:49:21:767::[4844] Feature INSTALLSTATE for Feature 'SetupXmlFiles' is '3'.
    2014/11/24 14:49:23:339::[4844] Ensuring the install-state of setup controller feature[SetupControllerFiles] for product[{90150000-001F-0409-0000-0000000FF1CE}].
    2014/11/24 14:49:23:339::[4844] Product INSTALLSTATE for ProductCode '{90150000-001F-0409-0000-0000000FF1CE}' is '5'.
    2014/11/24 14:49:23:340::[4844] Feature INSTALLSTATE for Feature 'SetupXmlFiles' is '3'.
    2014/11/24 14:49:25:046::[4844] Ensuring the install-state of setup controller feature[SetupControllerFiles] for product[{90150000-002C-0407-0000-0000000FF1CE}].
    2014/11/24 14:49:25:047::[4844] Product INSTALLSTATE for ProductCode '{90150000-002C-0407-0000-0000000FF1CE}' is '5'.
    2014/11/24 14:49:25:048::[4844] Feature INSTALLSTATE for Feature 'SetupXmlFiles' is '3'.
    2014/11/24 14:49:26:619::[4844] Ensuring the install-state of setup controller feature[SetupControllerFiles] for product[{90150000-012B-0407-0000-0000000FF1CE}].
    2014/11/24 14:49:26:620::[4844] Product INSTALLSTATE for ProductCode '{90150000-012B-0407-0000-0000000FF1CE}' is '5'.
    2014/11/24 14:49:26:620::[4844] Feature INSTALLSTATE for Feature 'SetupXmlFiles' is '3'.
    2014/11/24 14:49:28:951::[4844] Ensuring the install-state of setup controller feature[SetupControllerFiles] for product[{90150000-012C-0000-0000-0000000FF1CE}].
    2014/11/24 14:49:28:951::[4844] Product INSTALLSTATE for ProductCode '{90150000-012C-0000-0000-0000000FF1CE}' is '5'.
    2014/11/24 14:49:28:952::[4844] Feature INSTALLSTATE for Feature 'SetupXmlFiles' is '3'.
    2014/11/24 14:49:36:136::[4844] Opening registry key: HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Office15.LYNCENTRY.
    2014/11/24 14:49:36:136::[4844] Opening registry key: HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Office15.LYNCENTRY.
    2014/11/24 14:49:36:136::[4844] IsProductTransitionToMModeSafe: An exception was caught, therefore transition to MMode is unsafe for product:
    2014/11/24 14:49:36:136::[4844] Error: Product is not installed, therefore transition to MMode is unsafe for product: LYNCENTRY Type: 27::InstalledProductStateCorrupt.
    2014/11/24 14:49:36:136::[4844] Not showing message because suppress modal has been set. Title: 'Setupfehler', Message: 'Diese Produktinstallation wurde besch..digt. F..hren Sie Setup erneut von der CD, DVD oder einer anderen urspr..nglichen Installationsquelle aus.'
    2014/11/24 14:49:36:136::[4844] Message returned: 1
    2014/11/24 14:49:36:141::[4844] Error: Catalyst boot time check failed Type: 66::PreReqCheckFailure.
    2014/11/24 14:49:36:141::[4844] Catalyst execution finished: 11/24/2014 14:49:36. Return code: 30066. Exception caught: PreReqCheckFailure.
    2014/11/24 14:49:36:141::[4844] PERF: TickCount=11690621 Name=RunSetup Description=End function
    My next attempt was to look for MSI Files in Windows\Installer and the Uninstall RegKey
    MsiExec.exe /X{90150000-012C-0000-0000-0000000FF1CE} /qn /norestart /L*v
    "c:\windows\log\Microsoft_Lync_2013_Update_KB2817626_x86_0185_Install.LOG"
    MSI (s) (10:4C) [15:10:52:612]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (10:4C) [15:10:52:628]: SRSetRestorePoint skipped for this transaction.
    MSI (s) (10:4C) [15:10:52:631]: End dialog not enabled
    MSI (s) (10:4C) [15:10:52:631]: Original package ==> C:\Windows\Installer\bfb379.msi
    MSI (s) (10:4C) [15:10:52:631]: Package we're running from ==> C:\Windows\Installer\bfb379.msi
    MSI (s) (10:4C) [15:10:52:645]: APPCOMPAT: Uninstall Flags override found.
    MSI (s) (10:4C) [15:10:52:645]: APPCOMPAT: Uninstall VersionNT override found.
    MSI (s) (10:4C) [15:10:52:645]: APPCOMPAT: Uninstall ServicePackLevel override found.
    MSI (s) (10:4C) [15:10:52:645]: APPCOMPAT: looking for appcompat database entry with ProductCode '{90150000-012C-0000-0000-0000000FF1CE}'.
    MSI (s) (10:4C) [15:10:52:645]: APPCOMPAT: no matching ProductCode found in database.
    MSI (s) (10:4C) [15:10:52:649]: Opening existing patch 'C:\Windows\Installer\bfb3d2.msp'.
    MSI (s) (10:4C) [15:10:52:650]: Opening existing patch 'C:\Windows\Installer\bfb37a.msp'.
    MSI (s) (10:4C) [15:10:52:650]: Opening existing patch 'C:\Windows\Installer\bfb386.msp'.
    MSI (s) (10:4C) [15:10:52:651]: SequencePatches starts. Product code: {90150000-012C-0000-0000-0000000FF1CE}, Product version: 15.0.4569.1506, Upgrade code: {00150000-012C-0000-0000-0000000FF1CE}, Product language 0
    MSI (s) (10:4C) [15:10:52:652]: Note: 1: 2205 2: 3: MsiPatchMetadata
    MSI (s) (10:4C) [15:10:52:652]: SequencePatches returns success.
    MSI (s) (10:4C) [15:10:52:652]: Final Patch Application Order:
    MSI (s) (10:4C) [15:10:52:652]: {27D7A8D0-8E28-4A2A-A1D4-473E31DF6438} -
    MSI (s) (10:4C) [15:10:52:652]: {73E81413-5A7E-40A3-9BD5-821ADDF30B10} -
    MSI (s) (10:4C) [15:10:52:652]: {D448DFE1-B83E-4394-9484-25563EFBF58D} -
    MSI (s) (10:4C) [15:10:52:652]: Machine policy value 'DisablePatch' is 0
    MSI (s) (10:4C) [15:10:52:652]: Machine policy value 'AllowLockdownPatch' is 0
    MSI (s) (10:4C) [15:10:52:652]: Machine policy value 'DisableLUAPatching' is 0
    MSI (s) (10:4C) [15:10:52:653]: Machine policy value 'DisableFlyWeightPatching' is 0
    MSI (s) (10:4C) [15:10:52:653]: Looking for patch transform: 90006E0401000015.0.4569.1506
    DEBUG: Error 2746: Transform 90006E0401000015.0.4569.1506 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0401-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:653]: Skipping validation for patch transform #90006E0401000015.0.4569.1506. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:653]: Looking for patch transform: 90006E0401000015.0.4420.1017
    1: 2746 2: 90006E0401000015.0.4569.1506 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0401-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0401000015.0.4420.1017 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0401-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:654]: Skipping validation for patch transform #90006E0401000015.0.4420.1017. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:654]: Looking for patch transform: 90006E0402000015.0.4481.1005
    1: 2746 2: 90006E0401000015.0.4420.1017 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0401-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0402000015.0.4481.1005 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0402-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:654]: Skipping validation for patch transform #90006E0402000015.0.4481.1005. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:654]: Looking for patch transform: 90006E0402000015.0.4569.1506
    1: 2746 2: 90006E0402000015.0.4481.1005 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0402-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0402000015.0.4569.1506 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0402-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:655]: Skipping validation for patch transform #90006E0402000015.0.4569.1506. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:655]: Looking for patch transform: 90006E0402000015.0.4505.1008
    1: 2746 2: 90006E0402000015.0.4569.1506 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0402-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0402000015.0.4505.1008 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0402-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:655]: Skipping validation for patch transform #90006E0402000015.0.4505.1008. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:655]: Looking for patch transform: 90006E0402000015.0.4454.1509
    1: 2746 2: 90006E0402000015.0.4505.1008 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0402-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0402000015.0.4454.1509 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0402-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:655]: Skipping validation for patch transform #90006E0402000015.0.4454.1509. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:655]: Looking for patch transform: 90006E0405000015.0.4481.1005
    1: 2746 2: 90006E0402000015.0.4454.1509 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0402-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0405000015.0.4481.1005 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0405-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:656]: Skipping validation for patch transform #90006E0405000015.0.4481.1005. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:656]: Looking for patch transform: 90006E0405000015.0.4569.1506
    1: 2746 2: 90006E0405000015.0.4481.1005 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0405-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0405000015.0.4569.1506 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0405-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:656]: Skipping validation for patch transform #90006E0405000015.0.4569.1506. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:656]: Looking for patch transform: 90006E0405000015.0.4505.1008
    1: 2746 2: 90006E0405000015.0.4569.1506 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0405-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0405000015.0.4505.1008 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0405-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:656]: Skipping validation for patch transform #90006E0405000015.0.4505.1008. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:656]: Looking for patch transform: 90006E0405000015.0.4454.1004
    1: 2746 2: 90006E0405000015.0.4505.1008 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0405-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0405000015.0.4454.1004 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0405-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:657]: Skipping validation for patch transform #90006E0405000015.0.4454.1004. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:657]: Looking for patch transform: 90006E0406000015.0.4481.1005
    1: 2746 2: 90006E0405000015.0.4454.1004 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0405-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0406000015.0.4481.1005 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0406-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:657]: Skipping validation for patch transform #90006E0406000015.0.4481.1005. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:657]: Looking for patch transform: 90006E0406000015.0.4569.1506
    1: 2746 2: 90006E0406000015.0.4481.1005 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0406-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0406000015.0.4569.1506 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0406-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:657]: Skipping validation for patch transform #90006E0406000015.0.4569.1506. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:657]: Looking for patch transform: 90006E0406000015.0.4433.1507
    1: 2746 2: 90006E0406000015.0.4569.1506 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0406-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0406000015.0.4433.1507 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0406-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:658]: Skipping validation for patch transform #90006E0406000015.0.4433.1507. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:658]: Looking for patch transform: 90006E0406000015.0.4505.1008
    1: 2746 2: 90006E0406000015.0.4433.1507 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0406-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0406000015.0.4505.1008 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0406-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:658]: Skipping validation for patch transform #90006E0406000015.0.4505.1008. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:658]: Looking for patch transform: 90006E0407000015.0.4569.1506
    1: 2746 2: 90006E0406000015.0.4505.1008 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0406-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0407000015.0.4569.1506 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0407-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:658]: Skipping validation for patch transform #90006E0407000015.0.4569.1506. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:658]: Looking for patch transform: 90006E0407000015.0.4420.1017
    1: 2746 2: 90006E0407000015.0.4569.1506 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0407-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0407000015.0.4420.1017 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0407-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:659]: Skipping validation for patch transform #90006E0407000015.0.4420.1017. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:659]: Looking for patch transform: 90006E0408000015.0.4481.1005
    1: 2746 2: 90006E0407000015.0.4420.1017 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0407-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0408000015.0.4481.1005 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0408-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:659]: Skipping validation for patch transform #90006E0408000015.0.4481.1005. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:659]: Looking for patch transform: 90006E0408000015.0.4569.1506
    1: 2746 2: 90006E0408000015.0.4481.1005 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0408-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0408000015.0.4569.1506 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0408-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:660]: Skipping validation for patch transform #90006E0408000015.0.4569.1506. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:660]: Looking for patch transform: 90006E0408000015.0.4505.1008
    1: 2746 2: 90006E0408000015.0.4569.1506 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0408-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0408000015.0.4505.1008 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0408-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:660]: Skipping validation for patch transform #90006E0408000015.0.4505.1008. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:660]: Looking for patch transform: 90006E0408000015.0.4454.1004
    1: 2746 2: 90006E0408000015.0.4505.1008 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0408-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0408000015.0.4454.1004 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0408-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:660]: Skipping validation for patch transform #90006E0408000015.0.4454.1004. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:660]: Looking for patch transform: 90006E0409000015.0.4569.1506
    1: 2746 2: 90006E0408000015.0.4454.1004 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0408-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0409000015.0.4569.1506 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0409-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:661]: Skipping validation for patch transform #90006E0409000015.0.4569.1506. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:661]: Looking for patch transform: 90006E0409000015.0.4420.1017
    1: 2746 2: 90006E0409000015.0.4569.1506 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0409-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0409000015.0.4420.1017 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0409-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000FF1CE}.
    MSI (s) (10:4C) [15:10:52:661]: Skipping validation for patch transform #90006E0409000015.0.4420.1017. Will not apply because previous transform was invalid
    MSI (s) (10:4C) [15:10:52:661]: Looking for patch transform: 90006E0C0A000015.0.4569.1506
    1: 2746 2: 90006E0409000015.0.4420.1017 3: C:\Windows\Installer\bfb379.msi 4: {90150000-006E-0409-0000-0000000FF1CE} 5: {90150000-012C-0000-0000-0000000FF1CE}
    DEBUG: Error 2746: Transform 90006E0C0A000015.0.4569.1506 invalid for package C:\Windows\Installer\bfb379.msi. Expected product {90150000-006E-0C0A-0000-0000000FF1CE}, found product {90150000-012C-0000-0000-0000000
    MSI (s) (10:20) [15:16:59:072]: Transforming table Error.
    MSI (s) (10:20) [15:16:59:072]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (10:20) [15:16:59:072]: Transforming table Error.
    MSI (s) (10:20) [15:16:59:072]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (10:20) [15:16:59:072]: Transforming table Error.
    MSI (s) (10:20) [15:16:59:072]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (10:20) [15:16:59:073]: Transforming table Error.
    MSI (s) (10:20) [15:16:59:073]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (10:20) [15:16:59:073]: Transforming table Error.
    MSI (s) (10:20) [15:16:59:073]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (10:20) [15:16:59:073]: Transforming table Error.
    MSI (s) (10:20) [15:16:59:073]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (10:20) [15:16:59:073]: Transforming table Error.
    MSI (s) (10:20) [15:16:59:074]: Transforming table Error.
    MSI (s) (10:20) [15:16:59:074]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (10:20) [15:16:59:074]: Transforming table Error.
    MSI (s) (10:20) [15:16:59:074]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (10:20) [15:16:59:075]: Transforming table Error.
    MSI (s) (10:20) [15:16:59:075]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (10:20) [15:16:59:075]: Transforming table Error.
    MSI (s) (10:20) [15:16:59:075]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (10:20) [15:16:59:075]: Transforming table Error.
    MSI (s) (10:20) [15:16:59:075]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (10:20) [15:16:59:075]: Transforming table Error.
    MSI (s) (10:20) [15:16:59:075]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (10:20) [15:16:59:075]: Transforming table Error.
    MSI (s) (10:20) [15:16:59:075]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (10:20) [15:16:59:076]: Transforming table Error.
    MSI (s) (10:20) [15:16:59:076]: Transforming table Error.
    MSI (s) (10:20) [15:16:59:076]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (10:20) [15:16:59:076]: Produkt: Microsoft Lync 2013 -- Das Entfernen ist fehlgeschlagen.
    MSI (s) (10:20) [15:16:59:077]: Das Produkt wurde durch Windows Installer entfernt. Produktname: Microsoft Lync 2013. Produktversion: 15.0.4569.1506. Produktsprache: 0. Hersteller: Microsoft Corporation. Erfolg- bzw. Fehlerstatus der Deinstallation: 1603.
    MSI (s) (10:20) [15:16:59:079]: Attempting to delete file C:\Windows\Installer\bfb5a2.mst
    MSI (s) (10:20) [15:16:59:085]: Deferring clean up of packages/files, if any exist
    MSI (s) (10:20) [15:16:59:085]: Attempting to delete file C:\Windows\Installer\bfb5a2.mst
    MSI (s) (10:20) [15:16:59:085]: Unable to delete the file outside of the engine. LastError = 2
    MSI (s) (10:20) [15:16:59:085]: MainEngineThread is returning 1603
    MSI (s) (10:4C) [15:16:59:089]: RESTART MANAGER: Session closed.
    MSI (s) (10:4C) [15:16:59:089]: No System Restore sequence number for this installation.
    === Protokollierung beendet: 24.11.2014 15:16:59 ===
    MSI (s) (10:4C) [15:16:59:090]: User policy value 'DisableRollback' is 0
    MSI (s) (10:4C) [15:16:59:090]: Machine policy value 'DisableRollback' is 0
    MSI (s) (10:4C) [15:16:59:090]: Incrementing counter to disable shutdown. Counter after increment: 0

    2014/11/24
    14:49:36:136::[4844]
    Error: Product
    is not installed, therefore transition to
    MMode is unsafe
    for product: LYNCENTRY
    Type: 27::InstalledProductStateCorrupt.
    2014/11/24
    14:49:36:136::[4844]
    Not showing message because suppress modal has been
    set.  Title:
    'Setupfehler', Message:
    'Diese Produktinstallation wurde besch..digt. F..hren Sie Setup erneut von der CD, DVD oder einer anderen urspr..nglichen Installationsquelle aus.'
    From the snippet of the log, it appears that the product installation has been corrupted. Probably, try to repair it from Control Panel first and then test the command again?
    Also, is it Microsoft Lync Basic 2013?
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

Maybe you are looking for