Lync 2013 clients behind TMG 2010

Hi
My escenario is as follow
Lync Client 2013 --> TMG 2010 --> ISP Router (without fillter ports)
I have a problema with this escenario because TMG drop me the voice calls and sudendly drop me the connection with the server.In TMG i created the following rullo
From internal to external, and URL Set (*.microsoftonline.com,
*.microsoftonline-p.com , *.onmicrosoft.com, sharepoint.com, *.outlook.com )
Protocols: http, htpps, RTP, SIP, Sip Server, Sips, Sips Server,
50040-50059 TCP Outbound
50000-50019 UDP Send Receive
3478 UDP Send Receive
59999 UDP Send Receive
50020-50039 UDP Send Receive
So what is the problema with this TMG 2010 (with all updates, SPs and rollouts)
Thanks

Hi,
The following blog might help.
http://www.jaapwesselius.com/2012/12/21/publish-lync-2013-services-in-tmg-2010/
(Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Lync 2013 Client and Outlook 2010

Hi, I installed Lync 2013 (FE and Edge server). I am able to talk but still I need to buy suitable certificate in order to access from outside. Rest of the network is as follow. SBS 2011 with exchange 2010, clients have Office 2010.
Problems that I noticed are:
- If in Calelendar there is appointment, Lync client shows still available
- Lync meeting button doesn't react when pressed.
Is Lync 2013 client backward compatible with older office/Exchange or not ?

For presence show doesn't integrate with outlook, Verify that the
Lync Meeting Add-in for Microsoft Office is installed and enabled in Microsoft Outlook.
For lync 2013 client compatible with office and Exchange, you can refer below link
http://technet.microsoft.com/en-us/library/gg412817.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical

Disable Lync 2013 Client and Exchange 2010 Integration

Is it possible to disable integration to Exchange 2010 from a Lync 2013 client? I found a key that works for Lync 2010 by setting HKLM\Software\Policies\Microsoft\Communicator\PersonalContactStoreOverride to 1. That does not seem to do anything
to a Lync 2013 client, nor have I been able to find a solution to disable it via Registry/GPO. Some things I have found seem to indicate that key does is not used by a Lync 2013 client but that is somewhat speculation. Can someone tell me if there
is a key to disable this connectivity and disable it like what the key above does for 2010? Thank you!

Create a new-csclientpolicyentry -name "PersonalContactStoreOverride" -value "1" and assign it to a Client Policy
see Raffaele's post at: http://social.technet.microsoft.com/Forums/lync/en-US/0762e036-1f9f-43a6-bb81-686864260c9d/how-to-install-the-lync-client-through-sms-with-personal-information-manager-set-to-none?forum=ocsplanningdeployment
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

Lync 2013 Client pops up automatically while typing in Word , Excel in Windows 7 after upgrade from Lync 2010 client

Hello All,
Facing very much weird issue for only 4 users in my organization. This 4 users are migrated to Lync 2013 pool from Lync 2010 pool with Lync 2010 client migrated to Lync 2013 client.
Now whenever this users are typing in (apps like word, excel) automatically pops up Lync 2013 client which is annoying.
All my users are Windows 7 with latest updates & updates Lync 2013 with latest updates installed.
Any help really appreciated.
Regards
Anand S
Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

Hi
The solution is to do a ‘repair’ install of Office 2013. This will reregister the needed components and the popups will stop.
A repair install can be done from ‘Programs and Features’, highlight Office 2013 and click ‘Change’. When the install wizard appears, choose the ‘repair’ option.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Lync 2013 client still show titles that is turned off on Lync 2010 server

Hi All
I have another unique issue it seems.
Environment - Lync Server 2010 on CU5. Lync 2010 and Lync 2013 client.
The client has used absconfig and removed the titles as the don't want that to be displayed.
The lync 2010 clients does not show the titles - so that is working.
Lync 2013 from external access the titles does not show - so that is working.
Internally on the LAN the Job Titles shows on the Lync 2013 client - so not working.
What I've tried so far :
Disabled exchange contact sync on a client policy
Used webdownload only for address book.
Using registry to force download of address book.
Deleted the Lync folder on the client computer to make sure when it downloads the .idx and .db file that it is the latest version.
None of the above remediations seems to have any impact on the lync 2013 client.
I have tried to replicate this in my lab (without an exchange server) and the the lycn 2010 and 2013 clients behave as they should be not displaying the job titles.
Having anyone come across this before?
I will be patching the lync 2010 server to the latest CU update, but I think the issue is somewhere else.
Any suggestions will be appreciated.
Regards
Danie

Hi Danie,
I suggest you could install the latest CU update first, because the CU update would fix many problems.
In addition, shall we test Lync 2013 on a fresh computer without Outlook?(You could test this using Lync 2013 Basic).
Best regards,
Eric

Lync 2013 client ews has not fully initialized

Hello
I have Lync 2010 server and Lync 2013 client. whenever Lync 2013 client logs in from outside(external) I get a exchange authentication pop up. and when I checked the status of lync - it says ews is not fully initialized. lync 2013 client works fine
from inside. If I use lync 2010 client from outside than it works fine, no pop up and ews status is ok. so I know that my TMG rules are accurate but something wrong with lync 2013 client itself. I have upgraded the client to the latest update.
Also I have tried various combinateion of this below registry fix without any success.
also Microsoft remote connectivity analyzer test is clean. no errors.
http://uclobby.com/2014/01/03/lync-client-2013-ews-has-not-fully-initialized/
any thoughts?
thanks

Hi
Can you try clearing the user local cache SIP folder who logs in externally and see the results
User\App Data\Microsoft\Office 15\lync\SIP
Is your SIP domain different from your domain name
If it is so you can try by adding the SMTP Domain as trusted using the following cmdlet:
reg add HKLM\Software\Policies\Microsoft\Office\15.0\Lync /v TrustModelData /t REG_EXPAND_SZ /d <SMTP Domain> /f
If it is for multiple users you can also try the below article
http://technet.microsoft.com/en-us/library/gg398920.aspx
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Lync 2013 client and mobile

Dear All Hello,
i am having one very strange issue, I setup lync 2013 certficate all thing okay. We can login into lync 2013 client to lync 2013 server without any issue using PC but same login if i try to login into mobile having anrorid or windows phone it fais and its
pop up message we cannot sign you in please check your account info and try again.
We just created user using Enterprise voice optin, checked mobility is enabled. External url is configured.
Any body can refer if something is missing. I havenot updated any cu for lync 2013.
If i run Test-CsUcwaConference or Test-CsMcxP2PIM for mobiliity i get following error. I havneot done any update nor any tool as most of article are refering for lync 2010.
No response received for Web-Ticket service.
Inner Exception:The content type text/html; charset=utf
the response message does not match the content type of
binding (text/xml; charset=utf-8). If using a custom en
be sure that the IsContentTypeSupported method is imple
properly. The first 1024 bytes of the response were:
'<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//E
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 8.5 Detailed Error - 500.0 - Internal Server
Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,
a,sans-serif;}
code{margin:0;color:#006600;font-size:1.1em;font-weight
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 5px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 15px 10px 15px;word-break:break-all;
.summary-container
fieldset{padding-bottom:5px;margin-top:4px;}
legend.no-expand-all{padding:2px 15px 4px 10px;margin:0
-12px;}
legend{color:#333333;;margin:4px 0 8px -12px;_margin-to
font-weight:bold;font-size:1em;}
a:link,a:visited{color:#007EFF;font-weight:bold;}
a:hover{text-decoration:none;}
h1{font-size:2.4em;margin:0;color:#FFF;}
h2{font-size:1.7em;margin:0;'.
Inner Exception:The remote server returned an error: (5
Internal Server Error.

Let ensure the mobile client can connect fine
http://blogs.technet.com/b/nexthop/archive/2012/02/21/troubleshooting-external-lync-mobility-connectivity-issues-step-by-step.aspx
Also we can use the Lync connection analyzer tool for Mobile scenario and test
http://blogs.technet.com/b/nexthop/archive/2013/02/08/the-new-lync-connectivity-analyzer.aspx
Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph
Great follow up thanks!.
Seems i am near to solution.
I used web site url https://testconnectivity.microsoft.com it pass all test,
When i use to test using tool it goes to my local fqdn and says unable to resolve.
An error occurred while sending the request.
The remote name could not be resolved: 'lync1.hosting.mydomain.local'
When i open this url lyncdiscover_contoso.com it give both internal and extral url.
Which is this {"_links":{"self":{"href":"https://lync1.hosting.mydomain.local/Autodiscover/AutodiscoverService.svc/root?originalDomain=haxxess.com"},"user":{"href":"https://lync01.externaldomain.com/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=external.com"},"xframe":{"href":"https://lync01.externaldomain.com/Autodiscover/XFrame/XFrame.html"}}}
I am using lync 2013, with no tmg for publishing, internal web servie name is empty overrite and extranal is lync01.externaldomain.com
So as article says if i see internal url If the internal web services URL is identified, the web publishing rule is incorrect and is bridging the connection to port 443
instead of port 4443 for the Lync external web services.
Where do i have to change this in topology under web service. can you please guide this last phase.

Unable to search GAL on Lync 2013 Front End Pool through Lync 2013 client

I'm in the beginning of a 2010 to 2013 migration and I'm currently testing co-existence functionality between pools. I've noticed that users cannot search the GAL from their Lync client after being moved to the 2013 pool.
When trying to access the internal URL https://fepool13.domain.com/abs/handler the user is prompted to login and after three failed attempts, receives "401 - Unauthorized: Access is denied due to invalid credentials. You do not have permission
to view this directory or page using the credentials that you supplied".
Searching withing a Lync 2010 or Lync 2013 client returns no results, but there are no errors as well as nothing in the event logs or tracing folder regarding not being able to search.
The 2010 pool has been in production for a few years now and when accessing its internal ABS URL https://fepool10.domain.com/abs/handler the user is granted access after a successful login.
In the IIS logs there are slightly more detailed 401 error codes, but I’m not sure what to make of them.
The rtcab database appears to have user information and all three front end servers appear to be syncing with active directory. I say the rtcab database appears to have user info because the AbUserEntry table is filled with User ID'd, GUID's and a
bunch of other stuff.
The authentication on 2013 front end servers “internal lync website/abs/handler” is set to 1. Negotiate, 2. Ntlm - which is the same as the 2010 front end servers.
Any ideas?

Hi,
Which step did you do among migration from Lync Server 2010 to Lync Server 2013?
Did you already move CMS from Lync Server 2010 to Lync Server 2013?
Please create a new Lync account on Lync Server 2013 pool and test the issue again.
Please check if User Replication has completed with the help of the link below:
http://technet.microsoft.com/en-us/library/jj204680.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.

Hi Team,
Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.
Using Exchange 2010 Server and Lync 2010 Server at the back. To the best of my knowledge, this option is only available when using Exchange 2013 rather than Ex 2010.
Can somebody confirm this as I am not 100% sure about it.
Appreciate your help. Thanks
Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pk

Hi,
The photo precedence in Lync 2013 is high-resolution photo from Exchange 2013 -> Photo from web address -> Active Directory photo. The "Edit or Remove Picture" button is available if you integrate Lync Server 2013 with Exchange 2013.
Since you are Lync server 2010 and Exchange 2010, you can choose the following two options:
The thumbnailPhoto attribute on the user's object in Active Directory Domain Services
A URL configured by the user
More details:
http://blogs.technet.com/b/nexthop/archive/2010/11/22/microsoft-lync-2010-photo-experience.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Lync 2013 Client Not Display Numbers in Contact Card

Hi
I have a problem where Lync 2013 client connecting to Lync 2010 backend appears not download the contact list completely. Lync 2010 clients are all operating normally. On Lync 2010 client, you can view all contact details including Enterprise Voice
numbers and cell numbers for all users. However on Lync 2013 clients, Lync contact details for some users do not populate completely. In most cases, Enterprise numbers/Work Numbers/Mobile Numbers are missing. If the contact is pinned then the details
are retrieved.
In cases where Work/Voice/Cell numbers are not displayed, affected users is limited to making lync to lync calls only. The user can still dial the number and get through without any issues.
I have deleted and contacts cache on Lync 2013 but this has not helped.
Regards

Hi,
How about check the contact of “Outlook Test” user from the Lync 2010 client?
According to the second screenshot, since it’s an external account, the information will be limited.
Thanks,
Simon Wu
TechNet Community Support

Lync 2013 Clients prompting repeatedly for credentials for calendar data from outlook

Our Exchange server had crashed recently (nothing major) and a reboot of the CAS server resolved the issues. However since then all our domain computers with Lync 2013 clients are prompting for credentials for calendar data from outlook. We would but in
our domain credentials but it still asks. It would sometime ask once a day or sometimes repeatedly throughout the day.
I have look on the forums and tried fixes that included: editing IIS Autodiscover and ESW to use NTLM first , rebuilt lyncs cache in app data etc and none seems to resolve the issue. Any help would be appreciated.
Note: Our Lync 2013 environment is internal only. Only users on domain computers can access the service. We do use a proxy server here for internet but I do not believe Lync is going through the proxy since its internal to our network only. This is NOT happing
to our users with the Lync 2010 client.

Please update your Lync client with the latest version.
You can check the following KB:
http://support.microsoft.com/kb/2825630/en-us
November 7, 2013 update for Lync 2013 fix the issue Proxy authentication dialog box appears when you sign in to Lync 2013.
Lisa Zheng
TechNet Community Support

Schedule a meeting via Lync 2013 client

Hi All,
quick run down of my set up,
Exchange 2013 SP1 (no UM) and new installation of Lync 2013 FE with Feb 2015 cumulative updates (no Ent voice )
haven't integrated Exchange with Lync.
my problem is when i try to schedule a meeting with a colleague via Lync 2013 client it says "no free/busy information could be retrieved and if i let it stay open for 5 min it will come up or unless I unselect and reselect the user the information
comes up.
any idea what's causing thus and how to fix it?
Thanks in advance

Not sure of a fix, but Michael LaMontange posted a workaround for it:
http://realtimeuc.com/2013/04/no-free-busy-when-scheduling-meeting-from-lync/
Some other thoughts here:
http://www.doitfixit.com/index.php?option=com_content&view=article&id=82:no-freebusy-information&catid=34:exchange-2010&Itemid=53
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

"Collect Logs Button" available in Lync 2013 client?

In the Lync 2010 client I was able to enable a "Collect Logs" button for gathering logs pertaining to voice quality.
http://blogs.technet.com/b/nexthop/archive/2010/12/10/collectlogs.aspx
I've looked everywhere and can't find any references for this option in the Lync 2013 client. Can anyone confirm if this has been removed from the 2013 client? Or are there different settings to turn it on for 2013 clients?

It is not listed in the Lync Server 2013 Client Policies, so I am afraid this feature is not there.
Lisa Zheng
TechNet Community Support

Can't open email items from search after installing Lync 2013 client

Hello,
We're deploying Lync 2013 in our environment.
At the moment we're using Office 2010 on the clients.
For testing the deployment I've installed the Lync 2013 client.
After installing, when I perform a search on my pc and outlook items are found, they suddenly appear with an Outlook 2013 icon.
When doubleclicking, nothing happens, neither when I rightclick.
I've checked the "associate a file type or protocol with a prgram", and "set your default programs" in the control panel.
In neither of them I can find the Outlook 2013 icon, and for email, every file type is configured to open with Outlook 2010.
Does anyone know what might be the problem. We have this problem with every user for which we install the Lync 2013 client.

You can do the following to restore functionality:
If you have office 2010 use the keys below, the Lync install will change them to Office15:
[HKEY_CLASSES_ROOT\CLSID\{138508bc-1e03-49ea-9c8f-ea9e1d05d65d}]
@="@C:\\Program Files\\Microsoft Office\\Office14\\MAPISHELL.DLL,-110"
[HKEY_CLASSES_ROOT\CLSID\{138508bc-1e03-49ea-9c8f-ea9e1d05d65d}\DefaultIcon]
@="@C:\\Program Files\\Microsoft Office\\Office14\\MAPISHELL.DLL,-504"
[HKEY_CLASSES_ROOT\CLSID\{138508bc-1e03-49ea-9c8f-ea9e1d05d65d}\InprocServer32]
@="C:\\Program Files\\Microsoft Office\\Office14\\MAPISHELL.DLL"
"ThreadingModel"="Apartment"
[HKEY_CLASSES_ROOT\CLSID\{138508bc-1e03-49ea-9c8f-ea9e1d05d65d}\ShellFolder]
"Attributes"=dword:20140000

Lync 2013 client - Set people to "Blocked Contacts" relationship by default?

We are in the process of implementing Lync Server 2013 (on-premises). We have already implemented one front end pool and one edge pool and successfully tested the basic functionality. Now we are moving on to configuring the various policies based
on our requirements. One requirement that has come late in the planning is to prevent people from receiving IMs unless they explicitly allow people to IM them and to have the ability to whitelist IMs from people on an individual basis. This is a feature
that was submitted as a requirement by way of our IT HelpDesk manager.
From what I gather, this could be accomplished if someone had the ability to set the default to the "Blocked Contacts" relationship for everyone instead of "Colleagues". In my research on how to set that as the default, I found
a setting "ShowManagePrivacyRelationship" in Set-CsClientPolicy. I created a new per-user client policy called "TEST" and applied it to myself. Then I set ShowManagePrivacyRelationShip to $true via PowerShell on the TEST policy.
However, even hours after making the change and signing out and back into the Lync 2013 client, I still don't see any change in functionality or new options.
Now, if I instead sign in with the Lync 2010 client, I can indeed see a "Manage Privacy Relationships" option in a drop-down near the right side of the client which takes me to a view where I can see and move "People in my company" and
"People in domains connected to my company" pseudo-contacts from the "Colleagues" relationship to "Blocked Contacts" and this accomplishes exactly what we want to do.
Where can I find the "Manage Privacy Relationship" setting in Lync 2013 client? If there is no setting called that, how can I accomplish what I am trying to do using Lync 2013?
I would rather not use the Lync 2010 client, as our HelpDesk technicians all use Windows 8.1 and Office 2013.

David:
Yes, I have all of those relationships categories in Lync 2013. What I am missing is the ability to set the rest of the organization to
Blocked Contacts by default. I can do this with the Lync 2010 client using the same user login and the same Lync Server 2013 environment.
The following image demonstrates the location of the Manage Privacy Relationships option I would like to leverage in Lync 2013. The image is of the Lync 2010 client.
https://www.dropbox.com/s/i0g83i9su9e5zox/Manage_Privacy_Relationships.png
If I click that Manage Privacy Relationships option, I end up on the following screen. Note that there is a
People in my company object under Colleagues.
https://www.dropbox.com/s/kkatgtoexea7evt/Default_Privacy_Relationships.png
I am able to move that People in my company object to another relationship option. I moved it to
Blocked Contacts, as you can see below.
https://www.dropbox.com/s/956kw0ih15uksgr/People_In_Company_Blocked.png
As you can see in the following image, after making this change if I do not have a person on my Contacts list, they are unable to IM me. As you can see in my Lync 2013 client relationships list, no one is in my
Blocked Contacts list yet the Lync Test Account is being blocked due to the fact that I put People in my company there and haven't added them to my Contacts list.
https://www.dropbox.com/s/cue09wjj8tidbau/Blocked.png
After adding the Lync Test Account to my Contacts list, the Lync Test Account is able to IM me.
https://www.dropbox.com/s/nalju5ia980lc30/Unblocked.png
I hope these images help make clear that there seems to be a capability present in the Lync 2010 client that I am unable to locate in the Lync 2013 client. I can't find this
Manage Private Relationships option anywhere in the Lync 2013 client or any other option that lets me see those People in my company and People in domains connected with my company objects.
With regards to the EnablePrivacyMode option, I am already aware of it and that is not what we are looking for.

Lync 2013 clients behind TMG 2010

Similar Messages

Maybe you are looking for