Lync 2013 crashes when double-clicking on contact to send IM...

I have a 64 bit Windows 7 machine. I have Office 2010 and 2013 installed. I am able to successfully run Lync 2013 and login to the Lync Server and see my contacts and their statuses online. However, every time I double-click on a contact name to send
them an IM i get a message saying "Microsoft Lync has stopped working" and Lync shuts down and restarts. When I debug the error using Visual Studio 2010 I get an "Unhandled exception... Access violation" error.
Here is what I know so far... It has to do with some incompatibility with Office 2010, because when I uninstall Office 2010, Lync 2013 starts working properly. (However, I need Office 2010 installed for supporting my clients. <sigh>)
Here's is what I've done so far...
1. Uninstalled Office 2013 = Lync 2013 still crashes.
2. Uninstalled Office 2010 = Lync 2013 works fine now.
3. Reinstalled Office 2013 w/out Office 2010 present = Lync 2013 works fine.
4. Reinstalled Office 2010 followed by Office 2013 = Lync 2013 still crashes.
5. I've also delete the sip_ folder to have Lync recreate it = that doesn't work either.
I have also updated Lync 2013 to the latest version update provided by Microsoft, but nothing seems to help.
My Event Viewer says the following:
Faulting application name: lync.exe, version: 15.0.4675.1000, time stamp: 0x54629b57
Faulting module name: lync.exe, version: 15.0.4675.1000, time stamp: 0x54629b57
Exception code: 0xc0000005
Fault offset: 0x00f50000
Faulting process id: 0x1564
Faulting application start time: 0x01d024b896c56e36
Faulting application path: C:\Program Files (x86)\Microsoft Office\Office15\lync.exe
Faulting module path: C:\Program Files (x86)\Microsoft Office\Office15\lync.exe
Report Id: 282d47fc-90ac-11e4-8ed2-14feb598d143
Any help will be greatly appreciated!!!

Hi bihtime3,
I understand the inconvenience caused by this issue. I would like to confirm if you have tried the following scenarios.
1. Repairing Office 2013 after installing Office 2010.
2. Installing Office 2010 before installing Office 2013.
Best regards,
Eric

Similar Messages

T440P [20AN] - Lync 2013 Crashing When Sharing Desktop - Intel Driver

Hello,
After updating to the latest video drivers from the ThinkVantage Update Retriever, our Lync clients crash when sharing desktop on our T440P series and X240 series. I noticed when I uninstall the video driver I am able to screen share without incident. Also, if I update the driver from Windows Update I am able to share successfully. We use the update retriever and thininstaller to install our drivers in our environment. I have tried uninstalling the Lync updates all the way down to the base version and experience the same issue at every level. It crashes 100% of the time when sharing desktop. I have tested it on T440p machines in our environment that do not have the latest display driver, and no crashes occurred. Here are the specifics:
Thinkpad X240 [20AL]
Thinkpad T440p [20AN]
ThinkVantage Update Retriever 5.00.0007
Thinkvantage Thin Installer 1.2.0010
Intel HD Graphics Driver - gid634ww (10.18.10.3412)
Microsoft Lync 2013 SP1 32 Bit (15.0.4569.1503)
Error Message from Application Log:
Faulting application name: lync.exe, version: 15.0.4569.1503, time stamp: 0x52b0af33
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x53159a86
Exception code: 0x00000879
Fault offset: 0x0000c42d
Faulting process id: 0x220c
Faulting application start time: 0x01cf707ca316ae96
Faulting application path: C:\Program Files (x86)\Microsoft Office\Office15\lync.exe
Faulting module path: C:\WINDOWS\syswow64\KERNELBASE.dll
Report Id: 9bb7c6e4-dc70-11e3-b695-5c514fb23d46
Any help or insight is greatly appreciated.
Thank you,
John
Solved!
Go to Solution.

Just as an updated to this:
I'm still waiting on updated drivers to fix the issue, however, there is a workaround. If you disable Desktop Composition screen sharing will work.
Control Panel -> Performance and Information Tools -> Adjust Visual Effects -> Uncheck “Enable desktop composition
John

Lync 2013 Crashes when presenters switch

I am running Windows 7 on a 64 HP Workstation, Lync 2013, Lync 2010 Server. When the presenter changes in a Lync meeting. Lync crashes hard, sometimes requiring a computer reboot. Windows Reports the following event error.
0
APPCRASH
Not available
0
lync.exe
15.0.4623.1000
5372814c
nvwgf2um.dll
9.18.13.668
5057781b
c0000005
0062022f
C:\Users\bzf9lm\AppData\Local\Temp\WER191D.tmp.WERInternalMetadata.xml C:\Users\bzf9lm\AppData\Local\Temp\WER1FF1.tmp.appcompat.txt C:\Users\bzf9lm\AppData\Local\Temp\WER2197.tmp.hdmp C:\Users\bzf9lm\AppData\Local\Temp\WER2D5B.tmp.mdmp
C:\Users\bzf9lm\AppData\Local\Microsoft\Windows\WER\ReportQueue\AppCrash_lync.exe_cffcb765e1a532e26945899b4b55bbe99bff6e75_cab_2fc22ecf
0
646feb4e-3cfb-11e4-a673-10604b5c4584
36
The nvwgf2um.dll is a video driver from Nvidea. A colleague had the same Lync issue and his Intel Video driver on his computer was the reported file that caused his Lync 2013 client to crash. He has a different video card in his computer.
What cause Lync 2013 to crash. We both are using 15.0.4623.1000 version of Lync 2013

Try to update to the latest Lync 2013 client version.
Try the latest update from september.
http://support.microsoft.com/kb/2889860
regards Holger Technical Specialist UC

Logic 8 crashing when double click on color in the color window

every time I try and create a custom color in the color window by double clicking on a color square logic crashes . Is anyone else seeing this? - sent apple crash report

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

Lync 2013 Crashes When Transferring From Response Group

Hello,
Seeing a very strange issue on a couple of our clients running Lync 2013. Whenever they transfer a call from their response group Lync will crash. Calls into their direct line will transfer just fine. Here are two of the event logs we have
seen from this.
Faulting application name: lync.exe, version: 15.0.4569.1503, time stamp: 0x52b0bd5c
Faulting module name: mso.dll, version: 15.0.4569.1506, time stamp: 0x52e0dcca
Exception code: 0xc0000005
Fault offset: 0x0000000001828520
Faulting process id: 0x1550
Faulting application start time: 0x01cf4766655f5ead
Faulting application path: C:\Program Files\Microsoft Office\Office15\lync.exe
Faulting module path: C:\Program Files\Common Files\Microsoft Shared\Office15\mso.dll
Report Id: cbd75420-b38c-11e3-ae5c-0026b9dd72ee
Faulting application name: lync.exe, version: 15.0.4569.1503, time stamp: 0x52b0bd5c
Faulting module name: LyncDesktopViewModel.dll, version: 15.0.4569.1503, time stamp: 0x52b0c3a2
Exception code: 0xc0000005
Fault offset: 0x0000000000119795
Faulting process id: 0xee0
Faulting application start time: 0x01cf4757f9b12418
Faulting application path: C:\Program Files\Microsoft Office\Office15\lync.exe
Faulting module path: C:\Program Files\Microsoft Office\Office15\LyncDesktopViewModel.dll
Report Id: 9db0d18d-b359-11e3-ae5c-0026b9dd72ee
We have tried a number of things this to get this working, but nothing has worked.
Installed Office 2013 SP1
Completely re imaged the client's computers
Deployed new Polycom Lync phones
Completely removed clients from their response group and the Lync server and added them back
I'm not sure where to go from here or what might be causing this. I would appreciate any thoughts you might have. Thank you!

By default, calls from Response Groups ignore call forwarding or simultaneous ring settings.
Lisa Zheng
TechNet Community Support

Lync 2013 crashes when video preview or video is loading

Hey all,
For my work I have Office 365 (tried 32bit and 64bit) and this is installed on my windows 8.1 laptop of Dell. There are no problem using the software. But when I'm running lync and on purpose or by accidant go over the video icon in a conversation,
my lync freezes and after a while it wants to restart. The other microsoft voip software (Skype) does not have this issue and works perfectly. Also it is possible to open my video settings, the webcam will show everything like it should. Only hovering the
video icon in a chat is enough to make lync crash. For my work I'm really relying on lync., so I hope ther is a solution for this problem.
The webcam is a Quanta H.264 Integrate Webcam and it was working on a combination of earlier versions of windows and lync.
With some my colleagues (same laptop) running earlier version of windows there are no issues.
Is there some way to fix this problem?
thanks,

Mostly this problem is related with video driver.
Please try to update your video driver.
Lisa Zheng
TechNet Community Support

Acrobat X Crash when double clicking PDFs

I have reinstalled it from our CS5 disks but nothing has changed. It just crashes and tells me to restore the window. That's all well and good but this is happening almost all the time. I quit viewing the PDFs I make from InDesign because of this problem. I am working on a MacPro that is connected to a Microsoft server but pdfs from my hard drive even do this. Technically challenged but willing to learn.

This is the Adobe Reader forum; please post in the appropriate Acrobat forum.

2013 excel won't open when double clicked

Hello,
I am using window's 7. I am having an issue with excel. An excel file will not open when double clicked.
Thank you,

Hi,
Does this issue happen to a certain Excel file or all Excel files?
If this only happen to a certain Excel file, where is the file stored? We may try to open a blank Excel file, and then open the certain Excel file via File > Open and then navigate to the file to see the result.
If this issue happens to all Excel files, please go to Task Manager, click Processes tab and make sure Excel.exe is not listed there. If Excel.exe is listed, end the process and then try to opening Excel file to see the result.
If above doesn't fix the issue, we may also try to
run a repair of your Office installation to see the result. It seems that the method fixed a similar issue for a number of users according to another thread.
Please have a try and let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

JDeveloper IDE Crashing using double click on DataAction in struts-diagram.

Hello,
Has anyone had this problem with Jdeveloper10g?
We have a workspace for an application that has grown fairly large. The
problem happens when we try to drag a DataAction from the Component Palette
onto the struts-diagram when in the the JDeveloper10g IDE and then
double click the icon to create a data action. We get this message:
An Error has occurred in the Java VM
An operation has failed because an error has occurred in the Java VM. The current
activity may fail and the system may have been left in an unstable state. The following
is a stack trace.
java.lang.StackOverflowError
If further errors occur, you should restart the application.
If the error was an OutOfMemoryError, try closing some components, such as some
diagrams, or increase the Java heap size.
Also, report the problem on the JDeveloper forum on otn.oracle.com, or contact Oracle
support, giving the information in this message.
The Version of JDeveloper we are using is: 10.1.2.1.0 Build 1913 but we also had the
same problem using this same workspace in Build 1811. If we try a different workspace
there is no problem and we don't see the issue. Neither do we see the problem if we drag
either a DataPage or a plain Action from the Component Palette and the double click
either of those to create a Jsp page or an action.
We have spent hours using diffing software recursively on the workspace directories trying
to determine what may have gone wrong. We have eliminated a great deal from the problem
workspace including deleting everything from the struts-diagram (In a copy of the ws of course).
We really can't afford to rebuild the workspace from scratch and this problem causes us a
significant headache. It seems like a serious bug in JDeveloper itself.
Any help would be appreciated.
Thanks,

Problem Solved! This condition is caused by a circular dependency set up when the view was checked as a depndency for the model. We had a small class in the view that was being used in the model so the model was made dependant on the view and this causes an infinite loop condition of some sort when double clicking on a newly dropped in DataAction as described below.

When double click itunes icon it shows " The file itunes library.itl can not be read because it was created by a newer version of itunes" so what can i do?

when double click itunes icon it shows " The file itunes library.itl can not be read because it was created by a newer version of itunes" so what can i do?

Unless you have attempted to downgrade to an older version of iTunes this is likely to be a sign of a corrupt library. See Empty/corrupt library after upgrade/crash.
tt2

Outlook 2013 crashes when PDFMaker add-in is enabled

Outlook 2013 crashes when the Acrobat v.11.0.3 PDFMaker add-in is enabled. Outlook 2013 will automatically disable the add-in.
The Outlook 2013 version is 15.0.4517.1509, 32 bit. Windows 7 Pro 64 bit is the OS.
Below is the screenshot of the Outlook Account Info page.
Any comments or suggestions would be appreciated.

I was having to start Outlook 2013 two times every time I turned on my computer (running Windows 8.1 64-bit). The first time, Adobe Acrobad crashed Outlook, disabled PDF Maker, and closed. The second time Outlook started, told me it disabled PDF Maker, and gave me the option to re-enable. I then click to re-enable PDF Maker.
However, I tried LoriAUC's suggestion #1, to launch Outlook 2013 as Administrator. When I did that, Outlook just started up without disabling PDF Maker and without crashing. And PDF Maker remained availble to use within Outlook. That's the way it should always work.
So, I remember that Outlook ran fine with PDF Maker until this month of February 2014. I wonder what changed, Outlook or Acrobat Standard Edition so that Outlook crashes (unless running Outlook as Administrator).
In the meantime, I wonder how to make Outlook start as Administrator automatically without my having to do any extra steps. Or is there a better fix.

Can i delete the new feature that shows your recent calls when double clicking the home button?

Can the feature in the new IOS8 that shows your recent calls when double clicking the home button be deleted?

settings - mail,contacts,calendar - show in app switcher - OFF

Itunes crashes when trying to sync Contacts

My itunes crashes when it tries to sync contacts with Outlook. I cannot even select the Contacts tab to change the settings. When I click the Contacts tab, itunes crashes. Has anyone experienced this problem?

I'm experiencing the same problem.
A temporary fix is to open iTunes (without the iPod cabled into the computer.) Go to "Edit Preferences," then "Devices," and check the block that says "Disable automatic syncing..."
Then, attach the iPod USB cable. The iPod settings will all show up, but the iPod won't sync, and iTunes won't crash. You can then uncheck the block under the Contacts tab that says "Sync Contacts." (iTunes will ask you whether you want to save the existing contacts.)
Go back and uncheck the Disable automatic sync command. Tell iTunes to sync the iPod, and there shouldn't be an iTunes crash.
Admittedly, this is a bandaid until something better shows up. My suspicion is that it's a problem that originates with Outlook, and not iTunes.

IE Script error when double clicking on a view in Abap Webdynpro component

Hello experts,
I am running mini SAP trial version 2004 with Internet explorer 7.0 and also installed gui patch 23.
I am making a sample application in SE80 and when double clicking on a view in Abap Webdynpro component I get following error:
<b>Internet Explorer Script Error</b>
An error has occured in the script on this page.
Line: 1
Char: 1
Error: 'wdp_show_menu' is undefined
Code: 0
URL: http://satellite5200:8000/sap/bc/wdvd/painting.html?_vdrespkey=EOJ6V1JQMX0VLTQ7AP6DQM64Y&_vdframe=painting&sap-client=000
Do you want to continue running scripts on this page?
Thanks in advance.
Bhupendra

Hi Bhupendra,
If you are seeing this error in the Se 80 editor , i guess you can ignoire that ...While running the application it will not show any error.
Thanks
Anzy

How to get the alv grid report in another screen when double click on basic

Hi.
I have created an alv report using class cl_gui_alv_grid.I got another report in the same screen,when double clicked on basic list(using double_click event).I want to get this report in another screen.What i have to do?(In classical reports i worked with sy-lsind = 1 ,but how to do here?)
How to set color to the selected rows in the alv grid report?I worked with change_data_from_inside method of cl_gui_alv_grid.But it didn't work out..
With Regards,
Ramana.

On double click event . you will have to call another screen say 9000.
now within screen 900 PBO.. you will have to prepare the fieldcatalog/layout.. and the table to be displayed there.
in PAI of screen 9000, you can return to the original ALV.
method double_click.
call screen 9000.
endmethod.
" now in PBO create a module display_alv2
module display_alv2.
'prepare the fieldcat/layout info for new alv
'add the data to the new ALV table
'instantiate the grid call.. etc
'call the ALV
endmodule
"in PAI
module exit.
case sy-ucomm.
when 'ENT1'.
leave to screen 0.
endcase.
endmodule
while preparing the field catalog you can mention the EMPHASIZE field, whish will give color to tht column
E.g
*--Service Order
    ls_fieldcat-tabname   = 'IT_FINAL_VALID'.
    ls_fieldcat-fieldname = 'AUFNR'.
    ls_fieldcat-scrtext_m = 'Service Order'.
    ls_fieldcat-ref_table = 'AUFK'.
    ls_fieldcat-ref_field = 'AUFNR'.
    ls_fieldcat-col_pos   = 1.
    ls_fieldcat-outputlen = 12.
    ls_fieldcat-emphasize = 'C400'. "This will add color to the cell
    APPEND ls_fieldcat TO fcat_valid.
Hope this helps.

Lync 2013 crashes when double-clicking on contact to send IM...

Similar Messages

Maybe you are looking for