Lync 2013, Diagnostic Report ID: 52161, What does it mean?

I am digging one report and found ID 52161, reason="Session was terminated as we are tearing down the conference due to failure on a different session". Can anyone explain it in more details? how it happens?
also does anyone know where I can found a list of all Lync diagnostic IDs explanations?

I am seeing this for some (many, but not all) Lync 2013 users when they try to use the "Call me at" feature for a meeting join. The other line/audio device joins the conference but the client that instructed it to do so drops off with that error
after 30 seconds.
The client sends a SIP 200 and then 30 seconds later it sends a BYE. We've tested with multiple platforms and it seems to be related to the user doing the inviting, not the IP or software.
Hugh
08/18/2014|16:00:55.396 1644:15D4 INFO :: Sending Packet - 10.99.11.214:5061 (From Local Address: 10.97.7.178:64018) 982 bytes:
08/18/2014|16:00:55.396 1644:15D4 INFO ::
BYE sip:[email protected];gruu;opaque=app:conf:focus:id:N17TPK12 SIP/2.0
Via: SIP/2.0/TLS 10.97.7.178:64018
Max-Forwards: 70
From: <sip:[email protected]>;tag=adffee5f34;epid=324e3d1d92
To: <sip:[email protected];gruu;opaque=app:conf:focus:id:N17TPK12>;tag=F15A0080
Call-ID: 24faac1bbbdd4c3c98a0373c78768b8e
CSeq: 4 BYE
Route: <sip:wat-lyncfe-02.xyzre.net:5061;transport=tls;opaque=state:T:F:Ci.R1c84f00;lr;ms-route-sig=cnSOrmdjudxW-GKPyGU8agEx4xj1BMYA-EFmqKEU_qL3no1o_fGXQ20gAA>
User-Agent: UCCAPI/15.0.4623.1000 OC/15.0.4623.1000 (Microsoft Lync)
ms-client-diagnostics: 52161;reason="Session was terminated as we are tearing down the conference due to failure on a different session"
Proxy-Authorization: TLS-DSK qop="auth", realm="SIP Communications Service", opaque="E6E79DA7", targetname="wat-lyncfe-02.xyzre.net", crand="06321e94", cnum="19", response="c5119a9e11076592b5e84881ee68dcf97657e4bd"
Content-Length: 0

Similar Messages

Panic report in ML what does it mean?

Here is the panic report. Can anyone tell me if it is something to worry about? I just did a clean reinstall of Mountain Loin on Saturday. Mac OS X 10.8.2
Wed Sep 26 12:28:03 2012
panic(cpu 1 caller 0xffffff8015043d8e): "a freed zone element has been modified in zone: kalloc.512"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
Backtrace (CPU 1), Frame : Return Address
0xffffff80fd7cb8e0 : 0xffffff801501d626
0xffffff80fd7cb950 : 0xffffff8015043d8e
0xffffff80fd7cb990 : 0xffffff80150435d2
0xffffff80fd7cba70 : 0xffffff80150245ed
0xffffff80fd7cbaa0 : 0xffffff8015422ca2
0xffffff80fd7cbac0 : 0xffffff7f96f33d10
0xffffff80fd7cbaf0 : 0xffffff7f96f494e7
0xffffff80fd7cbb50 : 0xffffff7f96f4a891
0xffffff80fd7cbba0 : 0xffffff80154665b3
0xffffff80fd7cbbc0 : 0xffffff801546718d
0xffffff80fd7cbc20 : 0xffffff8015464b8f
0xffffff80fd7cbd70 : 0xffffff80150981e1
0xffffff80fd7cbe80 : 0xffffff8015020aed
0xffffff80fd7cbeb0 : 0xffffff8015010448
0xffffff80fd7cbf00 : 0xffffff801501961b
0xffffff80fd7cbf70 : 0xffffff80150a5b16
0xffffff80fd7cbfb0 : 0xffffff80150ced53
      Kernel Extensions in backtrace:
com.apple.driver.AppleIntelHDGraphics(8.0)[BDE59B66-6C1A-3B10-964C-B4D7296C2D3D ]@0xffffff7f96f2e000->0xffffff7f96fedfff
dependency: com.apple.iokit.IOPCIFamily(2.7.1)[9901C237-547C-3B52-99DE-C4870A19E2B5]@0xffff ff7f95672000
dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f9575c000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f95719000
BSD process name corresponding to current thread: WebProcess
Mac OS version:
12C54
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000014e00000
Kernel text base: 0xffffff8015000000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 19354042611540
last loaded kext at 11074635895791: com.apple.filesystems.smbfs     1.8 (addr 0xffffff7f97452000, size 229376)
last unloaded kext at 10514268669008: com.apple.driver.AppleHIDKeyboard         165.5 (addr 0xffffff7f97060000, size 16384)
loaded kexts:
com.parallels.kext.prl_vnic    7.0 15106.786747
com.parallels.kext.prl_netbridge      7.0 15106.786747
com.parallels.kext.prl_hid_hook       7.0 15106.786747
com.parallels.kext.prl_hypervisor    7.0 15106.786747
com.parallels.kext.prl_usb_connect 7.0 15106.786747
com.apple.filesystems.smbfs            1.8
com.apple.filesystems.afpfs 10.0
com.apple.nke.asp_tcp          7.0.0
com.apple.driver.AppleBluetoothMultitouch         75.15
com.apple.driver.AppleHWSensor   1.9.5d0
com.apple.iokit.IOBluetoothSerialManager            4.0.9f33
com.apple.filesystems.autofs            3.0
com.apple.driver.AudioAUUC           1.60
com.apple.driver.AGPM        100.12.69
com.apple.driver.AppleMikeyHIDDriver     122
com.apple.driver.AppleHDA 2.3.1f2
com.apple.iokit.IOUserEthernet       1.0.0d1
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport            4.0.9f33
com.apple.driver.AppleMikeyDriver           2.3.1f2
com.apple.Dont_Steal_Mac_OS_X      7.0.0
com.apple.driver.
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.4 GHz, 8 GB, SMC 1.58f16
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: WDC WD5000BEVT-00A0RT0, 500.11 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 5
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 4
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

Apologies if I seem rude but isn't it obvious?
you have already purchased this item means you have already purchased this item - you don't need to buy it, you've already bought it.
To download it check available downloads in the store menu means to download it check available downloads in the store menu. So if you look at your top menu bar (in your iTunes programme) select the Store and from the menu that appears, select Check for available downloads. My guess (and I realise I'm risking my reputation here ) is that when you click on that, you will see a list of the items you've bought which will include anything you haven't yet downloaded to your iTunes. I assume there will be an option with that list to download those items.
I would like to thank the person who thought of the idea of taking different words and putting them in a certain order, so that those words form a sentence, and that sentence can then be read by other people and those people understand. Genius!

What does this mean? drive reported error: sense key = medium error, etc,

What does this error message mean and what can I do about it?
While trying to burn a CD, about 15 seconds after the burn started, I got this error message:
The drive reported an error:
Sense Key = MEDIUM ERROR
Sense Code = 0x73, 0x03
What does this mean and what can I do about it? Any help greatly appreciated. TIA, Bill

I have no idea what the error means. However, need a little more info from you.
What type of CD are you using, audio or data? -R, -RW?
Any problems previously?
Try a different brand. Top forum favorites
CDs
FUJI
TDK
Verbatim
DVDs
Maxell
Make sure the DVDs are not dirty, smudged and/or scratched.
http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.

HT204406 I downloaded a song that is not playing. When i click to report a problem it gives me an error that says "To many HTTP redirects". What does this mean and how do I fix it? Thank you!

I downloaded a song that is not playing. When i click to report a problem it gives me an error that says "To many HTTP redirects". What does this mean and how do I fix it? Thank you!

The following support articles should help:
* https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component
* https://support.mozilla.com/kb/AUS+Update+XML+File+Malformed+200

I just downloaded i tunes to my new computer. I had an account on the old one. I received an error report - The file "I Tunes Library .itl" cannot be read because it was created by a new version of I Tunes. What does that mean?

I just downloaded I Tunes to my new computer. I had I Tunes on old computer. When I clicked on the icon on desktop I received the following pop-up.
the file "I tunes Library .itl" cannot be read because it was created by a new version of i tunes. What does that mean?

See Empty/corrupt iTunes library after upgrade/crash.
tt2

What does SIGSEGV mean on ipad crash report

What does SIGSEGV mean on ipad crash report

Depends entirely on the context, but generally refers to a stack overflow issue.
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

When I click on Print to print a pdf from my computer, the message "initialization of rasteurization module failed". What does this mean - how do I fix it?

Why can't I print a pdf in Acrobat Pro? I keep getting the message "initialization of rasteurization module failed". What does that mean and how do I fix that?

This is an Acrobat error ("Initialization of the rasterizer module failed.") but it is has never been reported before that I can see.
Let's start with the basics.
- What version of Acrobat Pro
- What system
- What printer
- Does it happen with other printers?
- Does it happen with all files?

Just upgraded to latest iTunes for Windows. Rebooted the PC as required. When I bring up iTunes I get a pop message saying "An unknown error occured (-42110)". What does that mean?

Just upgraded to latest iTunes for Windows. Rebooted the PC as required after the update. When I start iTunes I get a popup message saying "An unknown error occured (-42110)."
What does it mean?
How do I fix it?
Thanks!

Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
iTunes: Advanced iTunes Store troubleshooting

HT201359 What does it mean when a purchase is billed to "store credit"? Is it one of those iTunes gift vouchers? Only reason I ask is because I downloaded Ken Follit's FREE book from the 12 days of Christmas app and seem to have been charged 10.99 for it!

What does it mean when a purchase is billed to "store credit"? Is it one of those iTunes gift vouchers? Only reason I ask is because I downloaded Ken Follit's FREE book from the 12 days of Christmas app and seem to have been charged 10.99 for it!?

Thank you so much for the link. Am persevering thru it, will get there eventually, as I had already tried to press the Report a Problem link on the invoice, but it won' t connect to iTunes store on my iPad, it keeps saying can't connect. Infuriating. But thank you, you found me a link I would have taken ages to find.

If Logical level mappings are blank in an LTS , what does it mean?

Hi All,
I was trying to find this out in the forum but couldn't.
In my LTS, on the content tab, if i don't specify any "Aggregation, group by" information for the dims associated with my Fact table and keep it blank, then what does it mean? Would OBIEE treat this as at the detail level by default? So to test this, I created a logical fact and for its LTS, i didn't associate any logical level for dimensions. The query didn't give me any error and worked fine by using the correct join details.
Also when do we associate an LTS with the Total Level for a dim, what's the use because as I understand, this means all our measures from that LTS would be calculated for the total level of the dim and we can do this by creating level based measure and associating it with the total level of the dim.
I'll be thankful if somebody could explain me this in detail or direct me to a relevant documentation/ blog
Thanks,
Ronny

Hi,
When you have only one logical Table Source(LTS).
You don't specify the logical levels. By default it would consider the detail level of the logical levels mapped to the fact table.
When you have Multiple logical Table Source(LTS).
The concept of Multiple LTS comes into picture when you have multiple sources. The BI server picks the optimum logical source depending upon the fields (columns) selected. And also depends on the Number of element set while creating the dimension hierarchies. Refer-http://gerardnico.com/wiki/dat/obiee/level_number_element
For example- Suppose you have two logical table source Fact 1 and Fact 2 and logical levels( dimension hierarchies are created for two dimensions Dim 1 and Dim 2).
For the first Fact 1 source logical level is mapped only with Dim 1 and Fact 2 is mapped to Dim 2.
(You need to decide which fact source to hit depending upon the dimensions used in the report.)
Then in the report when you select Dim 1 (by means of column selector/filters) then Fact 1 source will be hit and same appears in the query.
Then in the report when you select Dim 2 (by means of column selector/filters) then Fact 2 source will be hit and same appears in the query.
One more situation where you have mapped Fact 1 with Dim 1 First level of aggregation and Fact 2 with Dim 1 with Detailed level. Then the BI server picks depending upon the user's request. If the request data can be pulled from the detailed level ( which tends to be optimum then picks from the second source).
So, its always better to set the logical source and check the query, if its hitting the correct sources according to the requirements.
Regards,
MuRam

What does it mean when I see the file with the question mark on my screen?

What does it mean when I see a file with a question mark on the screen?

Means no bootable system can be found or required system files are missing or damaged. Reinstall OS X.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

HT3782 What does it mean "Battery Health" Check battery in the battery menu bar?

What does it mean "Battery Health" Check battery in the battery menu bar?

Check the full status by going to the apple in the left side of the menu bar, About This Mac, More Info, System Report, Hardware, Power and see what it says about the Cycle count, Battery Condition, Battery Capacisty, charge remaining.
Condition should be Normal or there is a problem
Ratio of charge remaining to cpacity should be close, round off, to the reported battery charge percentage.
Cycle count tells how many charge cycles the battery has been through, typical lifetime cycle count for a current generation battery is 1,000 cycles.

What does this mean and how do I fix it? Error ITMS-9000 "Invalid Code Signing The executable ´viwer.app/ viewer´ must be signed with the certificate that is contained in the provisioning profile"

What does this mean and how do I fix it? Error ITMS-9000 "Invalid Code Signing The executable ´viwer.app/ viewer´ must be signed with the certificate that is contained in the provisioning profile"

If you had Firefox save your Yahoo password, first try deleting that here:
orange Firefox button ''or'' classic Tools menu > Options > Security > "Saved Passwords"
The "signed out" message seems to be related to how Yahoo authenticates you. Some users have reported that disabling automatic proxy detection solves the problem, and it also resolves an issue of getting logged out every few minutes, if you have ever experienced that.
To make the change:
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "Network" mini-tab, click the "Settings" button, then choose "No Proxy" and OK your way back out.
If your work connection requires you to use a proxy server, try the "Use system settings" option instead.
Does that help?

What does it means when you turn on the macbook and a file with a "?" mark flashes?

What does it means when you turn on the macbook and a file with a "?" mark flashes?

It usually means some system files are missing or corrupted. Reinstalling OS X is the fix:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

What does it mean: Error Message "Low system resources" ?

Hi,
we are using CR out of Visual Studio 2005 and 2008 for a PDF export.
We are able to start a report process and can see on the load of the process that the report seems to be generated, but we didn't received a report PDF file.
We add the following Registry key (depending on CR version) to get log files:
For 10.5: HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Report Application SErver\Server\
For 10.2: HKEY_LOCAL_MACHINE\SOFTWARE\Crystal Decisions\Report Application SErver\Server\
and got the following error message:
ErrorLog 2010 3 1 23:55:15.293 5576 7304 (..\reporthandler.cpp:11256): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"..\reporthandler.cpp" LineNum:11252 ErrorCode:568 ErrorMsg:"There are not enough free System Resources to perform this operation.
Error formatting Field Object.
Failed to export the report.
Error in File e:\ReportTemp\serviceusage {8F9A2AEB-96BB-400F-AB88-47E09C916B67}.rpt:
Low system resources.."
ErrorLog 2010 3 1 23:55:15.293 5576 7304 (..\reporthandler.cpp:11256): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"..\reporthandler.cpp" LineNum:11252 ErrorCode:568 ErrorMsg:"There are not enough free System Resources to perform this operation.
Error formatting Field Object.
Failed to export the report.
Error in File e:\ReportTemp\serviceusage {8F9A2AEB-96BB-400F-AB88-47E09C916B67}.rpt:
Low system resources.."
Maybe do you have any suggestions what the problem could be? What does it mean with "Low system ressources"? There should be enough memory, hard disc size and cpu power on the machine.
Please let me know if you need any further information.
Thank you very much for your help in advance!!
Best regards,
Matthias

Re logging. What I was referring was the following in your post:
We add the following Registry key (depending on CR version) to get log files:
ErrorLog 2010 3 1 23:55:15.293 5576 7304 (..\reporthandler.cpp:11256): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"..\reporthandler.cpp"; LineNum:11252 ErrorCode:568 ErrorMsg:"There are not enough free System Resources to perform this operation.
Error formatting Field Object.
Failed to export the report.
Error in File e:\ReportTemp\serviceusage {8F9A2AEB-96BB-400F-AB88-47E09C916B67}.rpt:
Low system resources.."
ErrorLog 2010 3 1 23:55:15.293 5576 7304 (..\reporthandler.cpp:11256): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"..\reporthandler.cpp"; LineNum:11252 ErrorCode:568 ErrorMsg:"There are not enough free System Resources to perform this operation.
Error formatting Field Object.
Failed to export the report
Error in File e:\ReportTemp\serviceusage {8F9A2AEB-96BB-400F-AB88-47E09C916B67}.rpt:
Low system resources..".
I think we want to back up a bit here. I am not sure what "Low System Resources" means or what it's about. So, let's try the following:
1) Are you able to export to any other format?
2) Are you able to print to printer?
3) Try a new simple app and add a viewer to the form. See if export from the viewer export button works.
4) In the above new app, export to CR report format from the export button on the viewer toolbar.
5) If you are able to get an exported rpt file, it will have saved data with it. Run that report in your original app (comment out any db logon code). Can you export a saved data report?
6) Make sure you have read / write permissions on the win\temp directory
7) What database are you connecting to and what is the database connection method (OLE DB, ODBC, etc.)
Ludek

Lync 2013, Diagnostic Report ID: 52161, What does it mean?

Similar Messages

Maybe you are looking for