Lync 2013 Error - Certificate could not be published in the database associated with User Services Cluster

Hi Lync gurus,
I have a weird issue:
Just installed a Lync Standard 2013. 
Everything works except I keep getting this error in Log: every 30 minute or so.
First an Error:  Event 47067
A server did not respond to HTTP request
Server lyncserver.domain.local did not respond to HTTP request PublishCertRequest targeted at
https://lyncserver.domain.local:444/LiveServer/UserPinService.
Cause: Server might be down or the network path between servers might not be properly configured.
Resolution:
Please ensure that the server can be connected on the target port using telnet and then re-try.
Then I get a Warning: Event 47068
GetAndPublish web service failed.
Certificate could not be published in the database associated with User Services Cluster [lyncserver.domain.local ]. Request Details - Entity: [[email protected]], Device Id: [6BB30A3E-2923-553A-8E5F-0B2FB2CEA330], Authenticated User: [sip:[email protected]].
Additional Context: [Publish_Failure: OtherFailure;HttpNoResponse:"lyncserver.domain.local "]
Cause: This could be due to network connectivity issues with the remote server, or because the database is down.
Resolution:
Please ensure that the user services is reachable and the database is up and running.
Thanks for any help

Please check you can telnet port 443 and port 444 on Lync Front End Serve from client.
Try to regenerate a new certificate for Lync Front End Server.
Check all the services on Lync Front End Server are started.
Check the option “Enable all purposes for this certificate” is checked for the trusted root CA certificate.
For the detailed steps:
Run MMC--Add\Remove Snap-ins--certificates--Local Computer--Trusted Root Certificate Authorities--Certificates, find the Root CA certificate you installed--Properties--General, check the "Enable all purposes for this certificate".
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • A certificate could not be found that can be used with this Extensible Authentication Protocol. (Error 798)

    Hi,
    I posted this on Azure forim with no luck maybe here is a better choise.
    When trying to connect a windows 8\8.1 client with a vpn connection for azure virtual network we get the fallowing error.
    "A certificate could not be found that can be used with this Extensible Authentication Protocol. (Error 798)"\
    I'm fallowing this msdn article about point to site vpn on azure. according to it the certificat is good for both win 7 and win 8.
    http://msdn.microsoft.com/en-us/library/azure/dn133792.aspx
    this is the commanf to build the client certificat:
    makecert.exe -n "CN=ClientCertificateName" -pe -sky exchange -m 96 -ss My -in "RootCertificateName" -is my -a sha1
    When runing the installtion of the certificat on the client the defult crtificate store is "Automatic", It does not metter if I leave it on Automatic or choose any of the other options (personal, trusted issuers ...) I always get the same error.
    Thanks

    Hi,
    Apologize to say that I am not familar with Azure and lack of the environment to investigate the issue here.
    Besides, please take a look at the below threads to see if it could help:
    Point-to-Site on Windows 8 Client
    connection Error 798
    Best regards
    Michael Shao
    TechNet Community Support

  • A certificate could not be found that can be used with this extensible authentication protocol in PEAP policy config

    Windows 2003 enterprise
    AD DC, DNS, DHCP, CA and IAS all are running from single server. But at the time of configuration of Remote Access Policy the error message of "a certificate could not be found that can be used with this extensible authentication protocol" is appeared.
    So with the help of mmc snap in the certificate was requested from CA (Domain Controller template)as a new certificate request and placed in the local computer personal folder. 
    After placing the certificate the error message was disappeared during configuring PEAP. 
    But after sometime the certificate was disappeared from remote access policy. But the same imported certificate was present in personal folder.
    What is reason for frequent disappearing?
    How to manage the situation?

    Hi,
    I think the cause is that the DomainControllerAuthentication certificate has superseded the
    DomainController certificate which is chosen during the setup of IAS.
    To avoid this, if you’re going to install IAS on a Domain Controller, the DC should be made to enroll for a separate certificate from the template
    'RAS and IAS Servers' before the IAS server is installed and this certificate should then be chosen for any PEAP setup.
    Further details:
    Enrolling Certificates with Templates
    http://technet.microsoft.com/en-us/library/dd197527(v=WS.10).aspx
    Configure the server certificate template
    http://technet.microsoft.com/en-us/library/cc755043(v=WS.10).aspx
    Steven Lee
    TechNet Community Support

  • Error "codepage could not be determined for the receiver-system"

    Hi,
    we use the idoc-adapter to send message from mySAP ERP to PI.
    All worked fine.
    So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
    When I start transction "we05" in mySAPERP" I get the following error:
    "codepage could not be determined for the receiver-system" status 02.
    I have changed the datatyp to "char" but the same probleme
    Can anybody help me please?
    Regards
    Stefan

    This error shouldn't occur unless there is some modification at the OS level codepages.
    Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
    Regards,
    Prateek

  • Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of '

    When I deploy the cube which is sitting on my PC (local) the following 4 errors come up:
    Error 1 The datasource , 'AdventureWorksDW', contains an ImpersonationMode that that is not supported for processing operations.  0 0 
    Error 2 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Adventure Works DW', Name of 'AdventureWorksDW'.  0 0 
    Error 3 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Customer', Name of 'Customer' was being processed.  0 0 
    Error 4 Errors in the OLAP storage engine: An error occurred while the 'Customer Alternate Key' attribute of the 'Customer' dimension from the 'Analysis Services Tutorial' database was being processed.  0 0 

    Sorry hit the wrong button there. That is not entire solution and setting it to default would work when using a single box and not in a distributed application solution. If you are creating the analysis database manually or using the wizard then you can
    set the impersonation to your heart content as long as the right permission has been set on the analysis server.
    In my case I was using MS Project Server 2010 to create the database in the OLAP configuration section. The situation is that the underlying build script has been configured to use the default setting which is the SQL Service account and this account does
    not have permission in Project Server I believe.
    Changing the account to match the Project service account allowed for a successful build \ creation of the database. My verdict is that this is a bug in Project Server because it needs to include the option to choose impersonation when creating the Database
    this way it will not use the default which led to my error in the first place. I do not think there is a one fix for all in relations to this problem it is an environment by environment issue and should be resolved as such. But the idea around fixing it is
    if you are using the SQL Analysis server service account as the account creating the database and cubes then default or service account is fine. If you are using a custom account then set that custom account in the impersonation details after you have granted
    it SQL analysis administrator role. You can remove that role after the DB is created and harden it by creating a role with administrative permissions.
    Hope this helps.

  • SFTP Receiver adapter error Message could not be forwarded to the JCA adapter

    Hi Experts,
    I'm needing help to solve a problem with an SFTP Receiver interface.
    Before I was sending in the adapter configuration as "Direct" in Write Modus (File .txt) and now I changed to "Use temporary file" is occurring this error:
    Message
    could not be forwarded to the JCA adapter. Reason: 2: Moving
    /ABCftp/To_XXX/140187613515701OUT_20140604-100214-622.TXT.tmp to /ABCftp/To_XXX/01OUT_20140604-100214-622.TXT failed.
    Files as TXT they are being written to the SFTP however when as TMP returns this error ... would not rule SFTP server to accept different TXT files?
    I also changed the namespace to "http://sap.com/xi/XI/System/SFTP" and "http://sap.com/xi/XI/System/File" but is not working.
    Any help will be welcome!
    tks.

    Hi Durga and Naveen...
    I believe the problem is when the application's legacy system picks up the file because the log file got the "tmp", ie, was not formed yet ...
    I changed to a directory without the intervention of the legacy application and it worked.
    I'm waiting for the opportunity to modify the legacy system to capture only files with the extension TXT.
    Tks All for help!

  • Restore error:iphone could not be restored because the firmware file is....

    can't restore my iphone 3g, becouse this error: iphone could not be restored because the firmware file is not compatibe
    To make things wors yesterday iphone was stoped i shutdown it and when i try to turn On the apple appears for a 30 sec then disappear... and again apple appears and for 30 sec disappear...So to fix this problem i need to do restore but i cant becouse i get the error.
    Message was edited by: liskan

    The error message you are getting sounds like you have jailbroken your iPhone or have updated to iPhone OS 4.0 Beta.
    Eitherway, I would follow http://support.apple.com/kb/ts1275 for a possible solution as these steps may not work.

  • Error - Exclusive access could not be obtained because the database is in use

    I am actually trying to make a script (in Sql Server 2008) to restore one database from one backup file. I made the following code and I am getting an error -
    Msg 3101, Level 16, State 1, Line 3
    Exclusive access could not be obtained because
    the database is in use.
    Msg 3013, Level 16, State 1, Line 3
    RESTORE DATABASE is terminating abnormally.
    How do I fix this problem ?
    IF DB_ID('AdventureWorksDW') IS NOT NULL
    BEGIN
    RESTORE DATABASE [AdventureWorksDW]
    FILE = N'AdventureWorksDW_Data'
    FROM
    DISK = N'C:\Program Files\Microsoft SQL Server\
    MSSQL10_50.SS2008\MSSQL\Backup\AdventureWorksDW.bak'
    WITH FILE = 1,
    MOVE N'AdventureWorksDW_Data'
    TO N'C:\Program Files\Microsoft SQL Server\
    MSSQL10_50.SS2008\MSSQL\DATA\AdventureWorksDW.mdf',
    MOVE N'AdventureWorksDW_Log'
    TO N'C:\Program Files\Microsoft SQL Server\
    MSSQL10_50.SS2008\MSSQL\DATA\AdventureWorksDW_0.LDF',
    NOUNLOAD, STATS = 10
    END

    Check, if there are existing connections to the database you are restoring by following command
    select spid from sys.sysprocesses where dbid = db_id('AdventureWorksDW')
    if you see any existing connections then kill them by issuing KILL command Syntax for kill is
    KILL <SPID>
    once you see there are no more connections then 
    Use mastergoIF DB_ID('AdventureWorksDW') IS NOT NULL
    BEGIN
    RESTORE DATABASE [AdventureWorksDW]
    FILE = N'AdventureWorksDW_Data'
    FROM
    DISK = N'C:\Program Files\Microsoft SQL Server\
    MSSQL10_50.SS2008\MSSQL\Backup\AdventureWorksDW.bak'
    WITH FILE = 1,
    MOVE N'AdventureWorksDW_Data'
    TO N'C:\Program Files\Microsoft SQL Server\
    MSSQL10_50.SS2008\MSSQL\DATA\AdventureWorksDW.mdf',
    MOVE N'AdventureWorksDW_Log'
    TO N'C:\Program Files\Microsoft SQL Server\
    MSSQL10_50.SS2008\MSSQL\DATA\AdventureWorksDW_0.LDF',
    NOUNLOAD, STATS = 10
    END
    Mark as answer, if it works.

  • Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

    Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

    I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

  • I can't start CS6 I get this error message "Could not initialize Photoshop because the preferences file was invalid (it has been deleted)." What do I do now??

    When I try to start CS6 I get this error message "Could not initialize Photoshop because the preferences file was invalid (it has been deleted)." What do I do now??

    Please refer:
    FAQ: How do I reset my preferences?
    Regards,
    Ashutosh

  • How do I fix this error?  "could not initialize photoshop because the preferences file was invalid"

    How the hell do I fix this error?  "could not initialize photoshop because the preferences file was invalid"

    Try Resetting your Preferences:  Hold down Ctrl Alt Shift keys while starting Photoshop. You will see the Reset dialog.

  • HT2404 Already purchase and sign. Lost internet data...aaaahh... .error - "We could not complete your purchase.The product distribution file could not be verified. It may be damaged or was not signed".

    Already purchase and sign. Lost internet data...aaaahh... .error - "We could not complete your purchase.The product distribution file could not be verified. It may be damaged or was not signed".

    Update: i spoke to a very knowledgeable applecare representitive who walked me thrue the process, we were trying to figure out what exactly was preventing Mountain Lion from installing & (after a process of elimination) it turns out you need to be log in as an Admin to download it, we also made sure everything was up-to-date. Downloading Mountain Lion took about 40 minutes (with roadrunner high speed internet, DSL might be a bit slower) once it was downloaded the installation process was very intuititive with just a few clicks and about 35 minutes i had the latest Operating System.

  • ERROR : Object could not be scheduled within the specified time interval

    I have the next error Object could not be scheduled within the specified time interval.
    When i schedule a report to be refreshed and the moment come when the report have to be refresh appear the error.
    i check the error in the following path in the CMC
    HOME> FOLDERS > USER FOLDERS > ... > "REPORT FOLDER"  Instance Properties
    Why i get this error?
    Anyone can give me a good solution to solve this error?
    Thanks!!!

    Hi Ed,
    The above error message is appearing due to the reason, when a large number of requests are scheduled to start at the same time, this may exceed the Maximum Number of Simultanius Requests that the deployment can support.
    To resolve this error message, increase the end time on the scheduled instance. To increase the end time, use the following steps:
    1. In the Infoview, browse to the desired report and click 'History'.
    2. Find the desired scheduled instance and click 'Reschedule'.
    3. Under the 'When' section, increase the end time for the scheduled instance.
    Upon completing these steps, the error message no longer appears.
    Hope it will help in resolving the error.
    Regards,
    Ritesh Nayyar

  • I purchased an audio book from I tunes but when I sync with my I phone it respond with error saying could not read or write the file. It only sync parts 2

    I purchased an audio book from I tunes but when I sync with my I phone it respond with error saying could not read or write the file. It only sync parts 2

    Those videos are probably not in an iPod-friendly format. It’s picky about that. You can try converting them, if possible.
    As for the audiobooks, are you sure they haven’t synced? You’ve enabled it to sync books and checked the “Audiobooks” section of your iPod?

  • Trouble getting QuickTime to run on Windows 7. Error 46: Could not load or find the Quick Time Active X control.

    Trouble getting QuickTime to run on Windows 7.Installation seems to finish successfully. When can try to open it I get the following error message:
    Error 46: Could not load or find the Quick Time Active X control.  I have reinstalled QuickTime and itunes several times but with no luck. Any suggestions?

    Hi Pedro d,
    Yes but no! I have tried everything step by step several times. Researching Error 46 on the web is scary business!! The gangsters are out in force on this one, begging to take your money! From a couple of trusted sites I have been able to make this much clear at least for Vista users, I'm using Windows 7 but I think they relate:
    "Since the issue causing the Error 46 is that QuickTime registry entries don't have the correct permissions set, the repair is to go and reset all the incorrect permissions. However, this is a long and tedious process. The SubInACL tool from Microsoft (see the link in Resources) can change the permissions as a batch. The batch is defined by a CMD file that lists all of the registry keys to be changed. Once SubInACL is installed on your computer, move the CMD file with all the registry changes into the same folder, typically C:\Program Files\Windows Resource Kits\Tools. Right-click the CMD file, choose "Properties," check "Run this Program in Compatibility Mode" and select "Windows Vista (Service Pack 2)" from the drop-down menu. Click "OK." Do the same for SubInACL. When you're done, double-click on the CMD file and it will run. Your error should be gone."
    I don't have the expertise to do this, do you? I wish that Apple or someone would take the bull by the horns and fix this because what I've read their are a lot of people having this problem. Any thoughts on this matter would be greatly appreciated.
    Kindly,
    pappy01545

Maybe you are looking for

  • How do I put two strings in one "string dialog box"

    example: testing connection.....Pass testing speed..........Pass testing motors.........Failed I send a string to a device and receive a string from this device. it is easy to print the string in a dialog box. but the problem is that the next string

  • JMenuItem/JButton Action

    Is it possible to disable the Icon made visible in the JMenuItem after creating it with an new 'Action'(String,Icon) ? thx.

  • Multiple JCO to different ECC systems

    Dear Portal Gurus, We have this need where in we need to point the BP for ESS to point to 2 ECC 6.0 env i.e. DEV and QA ECC. For the same how do we create JCOs to point to 2 different ECC from the same Portal server. We are at EP 7 SPS10. Thanks, Ash

  • Cs5 mac os 10.6.5

    ok i had the 30 day trial version of photoshop. it ended and i tried to uninstall all the files that were (photoshop related) anyways, then i went to the mac store and bought a full version of cs5 came home and installed it put in the serial number a

  • IC skin, how to create own skin?

    Hello! I would like to create my own skin for IC in CRM 7. It is not the same procedure as with the normal skins, but the "same" skins, at least with the same name, are available in the BSP Application CRMCMP_IC_FRAME. I can not find the tabled used