Lync 2013 hosting pack - CU July 2013 Support

Does the Lync 2013 Hosting Pack support the cumulative update of July?
What are the known issues?

My experience was running the LyncServerUpdateInstaller and run Install-CsDatabase on the servers. I haven't had it break mobility though.
With that in mind so far you only do that when you first install it because there hasn't been any further updates to Lync 2013 Hosting since it was released.
I have a ticket opened right now about the bad documentation on the deployment guide. My simple url wasn't working because the document says to provide -Tenant $GUID for the meeting URL but it didn't work 100%. However it worked sometimes!!
The Microsoft tech pointed me to a guys blog (yes thats right.. a non-microsoft blog) that shows to drop the -Tenant $GUID from the meeting URL but make sure you keep the -Tenant $GUID for the dialin url.
I basically wined and told them I wanted the 100% right way to do it. I wanted them to tell me either the deployment guide was wrong or there was a bug. Two weeks and no reply yet and they just update to say "They are still looking into it"
Not to mention when I opened the ticket they tried saying "Well this is still a new product". I said its been out for almost a freakin year and its not a NEW product.

Similar Messages

Lync multitenant hosting pack install guide

Hi
any one have Lync multitenant pack for hosting installation/deployment guide to setup for lab, tried Microsoft deployment guide but that is not more usfull. if some one have the guide or step by step share the details.

For Lync Server 2013 Multitenant Hosting Pack, you should check the deployment guide below:
http://www.microsoft.com/en-in/download/details.aspx?id=39101
Lisa Zheng
TechNet Community Support

Does Lync Server 2013 support Hyper-V Replica

I can’t find a definitive answer on this. I plan on either having 2 Standard Edition Lync 2013 Servers, or use Hyper-V replica for disaster recovery.
I’m expecting some down time during the failover. Looking for the simplest and most cost effective solution.

Hi,
It is not supported. Here are similar cases:
http://social.technet.microsoft.com/Forums/windows/en-US/ce08024b-6516-44b6-9fb0-76e9c02b1da2/does-lync-2013-support-hyperv-replica?forum=lyncdeploy
http://social.technet.microsoft.com/Forums/windows/en-US/d5882edc-e25c-4d09-9079-d6f8e90d4035/does-lync-2013-support-hyperv-replica?forum=winserverhyperv
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cisco VCS/Codian MCU and Lync 2013 integration

Hi,
I would like to know if Lync 2013 is supported to work with:
- Cisco Tandberg VCS version x6.1
- Cisco Codian 4.1 (comp. 6.16)
Is it necessary to update both devices to be supported/homologated/qualified?
Thanks

Hi, Kent ... From what I'm seeing so far the challenges of integrating Cisco/Tandberg equipment and Lync 2013 are the same as what you may have already encountered with Lync 2010. Since the Cisco endpoints and MCU cannot register directly to Lync 2010
or 2013, you will need to leverage the VCS systems as your SIP gateway between them and Lync clients. In Lync 2010 there were limitations as to the interoperability of the H.263/264 codec used by Cisco gear and the RTV codec that Lync was restricted
to, and we often experienced frozen video feeds from Lync clients or an inability to connect to individual Cisco endpoints or conferences hosted by the Codian MCU. Even though Lync 2013 will use H.264 as a codec for the video stream, I anticipate there
will still be challenges interconnecting through the VCS as well as providing content between Lync and Cisco endpoints. However, I expect an increase in the video quality since Lync 2013 supports higher resolutions and also uses a non-proprietary codec.
I expect content to still be unreliable for the Lync participant, even when using a Codian MCU.
You will still need to setup your VCS with a separate Neighbor zone for the Lync 2013 server just as you did for Lync 2010. I wouldn't hold my breath for Cisco to update the VCS software to accomodate the specific needs of Lync 2013, but at least the
VCS will get the correct video codec and connect your call. I don't know about you but I had to put my Cisco units and MCU into a separate SIP domain from the Lync pool, and then create a static route for the Cisco SIP domain on the Lync 2010 front-end
server. I expect to do the same in Lync 2013.
Ideally, Microsoft and Cisco would agree that SIP is SIP, and whether an endpoint registers with VCS, UCM or Lync shouldn't be relevant. Alas, it'll be a long, long time before that is true, certainly not as long as Microsoft and Polycom have
such a tight bond. I plan on implementing Lync 2013 in the next few months and will gladly post any progress here. At this point my plan is to simply mirror the static route and configuration I have with Lync 2010. My VCS and Codian units
are running software versions just a little ahead of yours and work fine.
Good luck!

Upgrading AD Server for Lync 2013

I have now a Lync 2013 infrastructure deployed on an Active Directory infrastructure based on Windows Server 2003 including the servers, the domain functional level and forest functional level. We are planning to upgrade to Windows Server 2012.
My questions are:
1/ What are the impacts to my Lync 2013 infrastructure?
2/ Is there any documentation addressing the changes on the Lync Infrastructure in relation to AD upgrade?
3/ Anyone could share his/her experience?
Albert

Hi Albert,
Lync 2013 supports a domain functional level of Windows Server 2012 R2, Windows Server 2012, Windows Server 2008 R2, Windows Server 2008, or at least Windows Server 2003.
Hence when you introduce a Win2012 DC into the environment, it doesn't make any difference till you have the domain\forest Func Levels at Windows Server 2003.
Windows Server 2003 domain and functional levels of Active Directory are depreciated(soon to be removed) in Windows Server 2012 DC. So if you plan to remove the Windows 2003 and raise the FFL\DFL then you need to consider the questions you have
here.
What Happens Next?
Another common question: what impact does changing the Domain or Forest Functional Level have on enterprise applications like Exchange or Lync, or on third party applications? First, new features that rely on the Functional Level are generally limited to
Active Directory itself. Regardless, changing the Domain or Forest Functional Level should have no impact on an application that depends on Active Directory.
An application like Exchange uses Active Directory to store its objects, or to perform various operations, none of that functionality should be affected if the Domain or Forest Functional Mode changes. In fact, if your applications are also written to take
advantage of new features introduced in Active Directory, you may find that the capabilities of your applications increase when the Level changes.
The answer to the question about the impact of changing the Domain or Forest Functional Level is there should be no impact.
Lync 2013 FFL\DFL requirement
doesn't specify any additional features upon raising the levels beyond Win2003.
Just make sure you don't break the existing DC and have enough redundancy.
Supported in-place upgrade paths
Domain controllers that run 64-bit versions of Windows Server 2008 or Windows Server 2008 R2 can be upgraded to Windows Server 2012. You cannot upgrade domain controllers that run Windows Server 2003 or 32-bit versions of Windows Server 2008. To replace
them, install domain controllers that run a later version of Windows Server in the domain, and then remove the domain controllers that Windows Server 2003.
References:
https://technet.microsoft.com/en-us/library/gg412955(v=ocs.15).aspx
What is the Impact of Upgrading the Domain or Forest Functional Level?
Active Directory Domain Services support in Lync Server 2013
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

How to configure Lync 2013 with Citrix xendesktop,

when we publish the Lync clinet in the Citrix XenApp 6.5, the mic is not working. we install the Lync VDI plug-in but still is not working.

The better place to ask is the Lync Forums. But make sure you are using the latest Cumulative Updates for your Lync 2013 clients. Also have a look at these threads:
http://social.technet.microsoft.com/Forums/lync/en-US/96c421a3-5dbf-4a7c-b760-09d21e35617a/lync-2013-support-on-citrix-xenapp-65?forum=ocsclients
http://support.citrix.com/article/CTX138408
http://support.microsoft.com/kb/2812461
Lync Forums:
http://social.technet.microsoft.com/Forums/lync/en-us/home?category=OCS
http://mariusene.wordpress.com/

Lync 2013 Multi-tenant Hosting Pack third-party solutions available for features listed as "Via Thirdparty"

Hi,
Who are all the third party vendors that can integrate with Lync 2013 Multi-tenant hosting pack V2 features that are supported Via 3rd party.
1) Call park
2) Outgoing DID manipulation
3) E-911
3) Dialplans & Policies
4) Support for Analog devices (e.g. FAX)
5) Response groups
6) Network QoS - DSCP
7) Phone number management
8) IM/P & Voice with Skype.
9)Inteoperability with on-premises video conferencing systems
Regards,
SR

Hi,
Base on my understanding, as it is the Mutli-Tenant environment, in internal DNS server, there is no need to add the DNS A record
lyncdiscoverinternal. However, you can try to add the DNS record in internal DNS server to test the issue as well.
Also, please make sure you have updated both Lync Server 2013 and Exchange 2013 to the latest version. If not, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Lync 2013 Hosting Pack v2 Skype integration

I have a Lync 2013 Hosting deployment. Hosting Pack v2 supports public IM with Skype, but in the guide the setup steps are missing. I configured the Federation
(federated provider ect.) like an on premise deployment and enabled Public IM connectivity on the Tenant:
Identity
     : Global
AllowedDomains
: Microsoft.Rtc.Management.WritableConfig.Settings.Edge.AllowList
BlockedDomains
AllowFederatedUsers   : True
AllowPublicUsers
: True
SharedSipAddressSpace : False
When I add a skype user to my buddy list, I cannot see the presence and in the Lync Front End Logs I get the following failure that the domain is not part of the tenant allow list.
Message-Body: <reportError xmlns="http://schemas.microsoft.com/2006/09/sip/error-reporting"><error toUri="sip:***[email protected]"
callId="c46a551b0e28439482edd9f3cbbc4a78" fromTag="eeef2d866f" toTag="F89423B3CF5DDBEF396B7A8FD53211EF" contentType="application/sdp;call-type=im" responseCode="403" requestType="INVITE"><diagHeader>27000;reason="To-Uri
Domain is not in the sender-tenant allow list";source="FRONTEND.DOMAIN.COM";appName="OutgoingFederation";OriginalPresenceState="0";CurrentPresenceState="0";MeInsideUser="Yes";ConversationInitiatedBy="6";SourceNetwork="5";RemotePartyCanDoIM="Yes"</diagHeader><progressReports/></error></reportError>$$end_record
What can I do to enable public connectivity on the tenant without adding the skype Domain (could be any Live ID) to the tenant allow list?
Greetings

Did you provision Skype Federation for the specific domain?
https://pic.lync.com/provision
Download Provisioning Guide for Lync-Skype Connectivity
http://www.pro-lync.be/blogs/lync2013/archive/2013/05/31/download-provisioning-guide-for-lync-skype-connectivity.aspx
Howto enable audio between Lync & Skype (What the Skype provisioning guide
is not telling you)
http://www.pro-lync.be/blogs/lync2013/archive/2013/06/06/howto-enable-audio-between-lync-amp-skype-what-the-skype-provisioning-guide-is-not-telling-you.aspx
- Belgian Unified Communications Community : http://www.pro-lync.be - MCM/MVP/MCT

Lync 2013 multitenant hosting pack and lync 2010 on-prem - coexistence options, alternative migration scenarios

In post http://social.technet.microsoft.com/Forums/lync/en-US/8a22eed7-cc63-4f9e-b422-3c5a57fb32b0/lync-2013-multitenant-pack-and-lync-2010?forum=lyncdeploy , which was already answered, the answer is no, you cannot migrate from 2010 on-prem. to lync 2013
hosted pack.
Trying to get my head around #1 -why, and #2 -what other alternatives are available.
Lisa answered that there can only be 1 CMS per forest. Is it one CMS per forest, or
one CMS per front end pool in a forest? Meaning you can have different CMS pools. If that were true, we could migrate users to a different front end pool in a coexistence scenario between 2010 on-prem to 2013 hosted pack.
Has anyone done this?
This is tough. I guess a cutover then from 2010 to 2013 multitenant hosted pack would be what?
1. Uninstall 2010, decommission users, decom environment/servers.
2. Fresh install in same AD environment of 2013 hosted pack.
That's tough for our users to make such a transition and have potentially days of downtime.
Is there no other way to do this?
Josh

It is one CMS per forest.
There is no official guide to move from Microsoft Lync Server to Microsoft Lync Server Multitenant Hosting Pack.
This topic has been discussed several times before:
http://social.technet.microsoft.com/Forums/lync/en-US/9d438b55-ec53-478a-9247-6d355abedb78/started-installing-lync-2010-enterprise-discovered-multitenant-hosting-pack-do-i-need-to-uninstall?forum=ocsplanningdeployment
http://social.technet.microsoft.com/Forums/lync/en-US/ad0b77ca-d47e-457b-8f77-33f84409a119/schema-update-lync-hosting-pack?forum=ocsplanningdeployment
Lisa Zheng
TechNet Community Support

Lync 2013 Hosting pack tenant meet url returns 404

Hi all,
I have a 2 problems in the Hosting pack:
1. Meet urls are correctly generated for tenants (IE https://meet.hoster.com/tenantdomain/user/confID) but they return a 404 when browsing to the meeting from a browser
2. Office web apps presentations just never work. It just says that it cannot connect to the presentation server.
For problem 1, what I tried was:
1. Set Set-Cssimpleconfiguration -UseBackendDatabase $True -Tenant <TenantID>
2. Tried repairing the IIS Rewrite module as per http://social.technet.microsoft.com/Forums/lync/en-US/e1fbdaa9-0961-4171-ab51-91b8d37432de/action?threadDisplayName=lync-meetings-not-available-404-for-every-url
3. Made sure all my domain maps are correct
4. All certs seem 100% fine.
What is weird is:
https://dialin.hoster.com/dialin - works
https://meet.hoster.com/meet - works (Default cannot join the meeting page)
https://meet.hoster.com/tenantdomain/tenantuser/confid - Does not work
Any help will be greatly appreciated.
\\Tjopsta// http://www.tjopsta.net

Hi,
For first question, try the following steps:
Remove IIS URL Rewrite Module 2 in Control Panel.
Run Step 2: Setup or Remove Lync Server Components with Lync Server Deployment Wizard.
For second question, check if you can access Office Web Apps Server discovery URL via browser.
Check if you associate Office Web Apps Server with Front End pool.
Regards,
Lisa Zheng
Lisa Zheng
TechNet Community Support

SQL Server 2012 Standard Support for Lync 2013

Hi,
Does SQL 2012 Standard version support Lycn 2013 , I am planning to have following features.
1- SQL 2012 Mirroring
2- Monitoring Role on FE Servers
Regards
Usman Ghani
Usman Ghani - MCITP Exchange 2010

Agree with Anthony, SQL 2012 Standard support Lync 2013.
For Standard or Edition Edition of SQL that according to High availability node of Database that you want.
Two-node failover clustering for the following:
Microsoft SQL Server 2012 Standard (64-bit edition). Additionally running the latest service pack is recommended.
Microsoft SQL Server 2008 R2 Standard (64-bit edition). Additionally running the latest service pack is recommended.
Up to sixteen-node failover clustering for the following:
Microsoft SQL Server 2012 Enterprise (64-bit edition). Additionally running the latest service pack is recommended.
Microsoft SQL Server 2008 R2 Enterprise database software (64-bit edition). Additionally running the latest service pack is recommended.
Also for more detail details, you can refer below link
http://technet.microsoft.com/en-us/library/gg412952.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Lync 2013 Multitenant hosting meeting URL

I have a Lync 2013 multitenant hosting environment. Lync Meeting Add-in for Microsoft Outlook 2013 closes itself a split second after it opens, no
error, no pop-up, and no message to say what’s going on. Yet within the Lync client, I can still start an ad-hoc meeting (“Meet Now”), But the
Meeting Entry Info URL looks like this conf:sip:bongani@......... Instead of a norma https link. I also have the event below on the Lync server event
viewer. but the meeting URL are configured in the format https://meet.hosterdomain.co.za/tenantdomain.co.za
Event ID 32148 – LS User Service
A user tried to create a conference with no Simple URL of type Meet available. This configuration will not work for scheduled conferences. Ad-hoc
conferences may be created but join functionality will be impaired.
And if I do a Set-CsSimpleUrlConfiguration -UseBackEndDatabase $false as recommended. I get the following when I run enable-cscomputer.
WARNING: No patterns found. Skipping rewrite rules creation for Meet simple URLs.
WARNING: No patterns found. Skipping rewrite rule creation for dial-in conferencing.
WARNING: No patterns found. Skipping rewrite rule creation for Web Scheduler.
WARNING: No patterns found. Skipping rewrite rule creation for dial-in conferencing.
WARNING: No patterns found. Skipping rewrite rule creation for Web Scheduler.
WARNING: "Enable-CsComputer" processing has completed with warnings. "5" warnings were recorded during this run.
WARNING: Detailed results can be found at "C:\Users\xxx\AppData\Local\Temp\Enable-CsComputer-26374787-f6b5-4a07-b8f4-7bd819d3ffc3.html".
I tried following http://www.lyncexch.co.uk/lync-2013-hosting-pack-tenant-meet-dialin-urls/ but the URL doesnt change.
Not sure if all these are related or what needs to be corrected please assist.

For Event ID 32148 – LS User Service, you can refer below links
http://www.lyncexch.co.uk/lync-2013-hosting-pack-tenant-meet-dialin-urls/
http://www.lyncexch.co.uk/2014/02/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Language Pack For Microsoft Lync 2013

Hi,
Do you have any idea when will Language Pack for Microsoft Lync 2013 be released?
Thanks,

Hi EAskaroglu,
Lync 2013 is part of Office 2013, you can install the language packs for Office 2013.
There is no language pack for Lync Server 2013, you can choose the language when download the installation package.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Issues with Hosted Exchange, UM and Lync 2013.

Hello everyone!
I am trying to deploy UM with Office 365 Hosted Exchange. We are using one Lync 2013 Standard Edition FE and have deployed one edge server. We have set up our firewall to host the Reverse Proxy.
We do not use wildcard certs. External DNS resolves the _sipfederation and sip._tls SRV records to the external face of the edge server. The edge server functions as it should for remote users and mobility.
I have tried to follow these instructions to the letter three times over to no avail.
http://y0av.me/2014/01/07/lyncum365/
Neither Snooper or Event Viewer show any particular issue, though when I try to dial out to voice mail I will get one to two rings and then 5 seconds of silence a fast busy, and finally "Call Unsuccessful".
When checking the firewall logs I notice a seemingly random 10.x.x.x address being sent to the firewall by the external leg of the edge server. Wireshark captures it as STUN packets on port 3478 being sent to port 3478. These are being dropped by our firewall.
I believe them to be RTP packets but I do not know if this is normal behavior. Has anyone any ideas?

My mistake. Here is the snooper result.
TL_INFO(TF_PROTOCOL) [edge\edge]0C4C.05E4::06/18/2014-15:43:34.153.0000000C (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265)) [3770767507]
Trace-Correlation-Id: 3770767507
Instance-Id: 2E5A
Direction: incoming;source="external edge";destination="internal edge"
Peer: exap.um.outlook.com:5061
Message-Type: response
Start-Line: SIP/2.0 488 Compression algorithm refused
From: sip:sip.domain.net;tag=08FB9ED133BA396696FE6546EA6F3031
To: sip:exap.um.outlook.com;tag=B8FFE4E9267ED6ECB78ADCC60126B53F
Call-ID: 66602CE1F9980BFA94AD
CSeq: 1 NEGOTIATE
Via: SIP/2.0/TLS 10.11.11.23:50752;branch=z9hG4bK2132316E.5B3AF52DE2753A36;branched=FALSE;received=207.46.5.9;ms-received-port=50752;ms-received-cid=60172700
Content-Length: 0
Server: RTC/5.0
TL_INFO(TF_NETWORK) [edge\edge]0C4C.05E4: :06/18/2014-15:43:34.153.0000000D (SIPStack,NegotiateLogic::SetCompressionType:NegotiateLogic.cpp(2701)) [559249495]( 00000079B1274FB8 ) Compression type is now CompOff
TL_INFO(TF_NETWORK) [edge\edge]0C4C.05E4: :06/18/2014-15:43:34.153.0000000E (SIPStack,NegotiateLogic::ProcessCompressionResponse:NegotiateLogic.cpp(2217)) [559249495]( 00000079B1274FB8 ) Peer refused [488] our request for compression
TL_INFO(TF_NETWORK) [edge\edge]0C4C.05E4: :06/18/2014-15:43:34.153.0000000F (SIPStack,NegotiateLogic::AdvanceOutboundNegotiation:NegotiateLogic.cpp(910)) [559249495]( 00000079B1274FB8 ) Outbound negotiation sequence is complete
$$end_record
And finally..
TL_INFO(TF_PROTOCOL) [edge\edge0C4C.05E4::06/18/2014-15:43:49.379.0000002E (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265)) [962697980]
Trace-Correlation-Id: 962697980
Instance-Id: 2E61
Direction: incoming;source="internal edge";destination="external edge"
Peer: fe1.domain.net:61254
Message-Type: request
Start-Line: BYE sip:uminternal.um.prod.outlook.com:5066;transport=Tls;ms-fe=CO1PR02MB111.namprd02.prod.outlook.com SIP/2.0
From: <sip:[email protected]>;tag=b736386270;epid=9bcee72318
To: <sip:[email protected];opaque=app:voicemail>;tag=eced411395;epid=07C3F2A933
Call-ID: 4266a095bdef8280d67c7e7df58446fc
CSeq: 2 BYE
Via: SIP/2.0/TLS 10.10.10.25:61254;branch=z9hG4bKC848F11A.A88BCA6858661A50;branched=FALSE
Via: SIP/2.0/TLS 10.10.10.125:49156;ms-received-port=49156;ms-received-cid=401200
Route: <sip:edge.domain.net:5061;transport=tls;opaque=state:Si;lr>
Route: <sip:exap.um.outlook.com:5061;transport=tls;epid=07C3F2A933;lr;ms-key-info=AAEAARc45bIQE6UJAYvPAR8eV4QTvCH3EE2Kxtie7I2PMCSj-2aArKHP8dStYlJe-9jphIkz_mDEkCD_v8hY-mghQEHD6-F12E7E14YG-TJ2gEcQE0Bx2r_rDB3LrzRZzgQ0WVvxreLPWGI80elWF-xfbc_X3JE8mOR2OB9KQM8-e9WOjfq2kj6CnDGeL0yzgz4OB8zm-ao03Yo4gMZ-BpwaxC3BNuvvVDJo9wqrYftq_Z3MIVewWrqcDt5Td4vxCsMiXdwEqtEIRKVvQoqboleBJAyQl-C3qGgfEoSkUnApFuTSnQYRa4kbZ1iPaACpdKT-VTQGjc9HXfps48YJCsIXW0Ab_NSM2uvhUyw900men1ukXSmoZoWZbwqe5siuWVUcFoQl1h1Jcy4lCyZUfDZoqPzDioLqTk9iUmS8fa-PAJjsq72yGjVB_y1aJSxtHVsw7MiDqOGOPqT3dmF-sINkeyuokCy8UCf_cQHmEHwVzZLUJqaVccr3QNCLsBzhcWSypnC60ZZphOKuwl6RvUXWICPf0ubLTL2ppC3tWEgFdUUWOPVd84uGlMcqRLKGb1qrmpj8Nu6Lte7t5n2pMEBCfgAe79t4GO0C5KScdKT_XBM1iIBRXdNkPKHfSgC-wPQgRikdw7vRD-hOWlN5Lay7-zkQ4Ag6rauszFTAwbft99OieAOxKIsgYcxXxcG6;ms-route-sig=fiEMuzbN4_PyEz_I5gG3g8FtqNAonwgZCoRnOq-ByfYEtywTZp-Hk_eAAA>
Max-Forwards: 69
Content-Length: 0
ms-client-diagnostics: 22; reason="Call failed to establish due to a media connectivity failure when both endpoints are internal";CallerMediaDebug="audio:ICEWarn=0x40003a0,LocalSite=10.10.10.125:6735,LocalMR=10.11.11.23:51430,RemoteSite=10.27.46.15:5286,RemoteMR=207.46.5.80:54106,PortRange=1025:65000,LocalMRTCPPort=51430,RemoteMRTCPPort=54106,LocalLocation=2,RemoteLocation=2,FederationType=0"
$$end_record

Lync 2013 mobile client. Can't verify the certificate from the server. Please contact your support team

We upgraded Lync Server 2010 to Lync 2013.
Users are able to login on desktop clients but unable to connect on mobile client. We get following error message:
Can't verify the certificate from the server.
Please contact your support team

Please check the Root CA is installed on your mobile device.
Can you sign in externally?
Please check you have updated the DNS records for Lync mobile autodiscover service.
Lisa Zheng
TechNet Community Support

Lync 2013 hosting pack - CU July 2013 Support

Similar Messages

Maybe you are looking for