Lync 2013 is not working properly

Hi,
I have installed Lync 2013 FE server and it was working fine until yesterday. I am not able to Csenable users or couldnot open Lyncserver controlpanel. I am receiving error about unauthorized authorization failed. I restarted sql browser service,uninstall
ms silverlight and all other options which showed online, but I am getting same error. Please  help me to find the solution this.
Thanks.

Hi shrigiriraj,
On your Lync Front End Server, open IIS, expand Lync Server Internal Web Site, browse cscp to check if you can access successfully. If you can access the website successfully, the issue is more of a DNS issue.
Best Regards,
Lisa Zheng
Lisa Zheng
TechNet Community Support

Similar Messages

  • Mac Lync 2011 and Lync 2013 - Autodiscovery not working

    We're currently setting up a Lync 2013 topology including Front End Pool and Edge Server.  I've been told that the Lync 2011 client should work with lyncdiscover and lyncdiscoverinternal as it does for IOS and Windows.
    However looking at the logs being generated by the Lync 2011 client this doesn't seem to be the case.  I'm seeing
    sipinternal, sip, sipexternal when Lync 2011 is set to AutoConfigure.  I do not have any of these configured.
    If I manually specify lyncdiscover and lyncdiscoverinternal the logs show it's starting to find the Front End Servers, but still errors.
    What am I doing wrong?

    Hi,
    Please add the following SRV records in internal DNS Server:
    _sipinternaltls._tcp.sipdomain.com
     _sipinternal._tcp.sipdomain.com
     _sip._tls.sipdmain.com
    Then flush the DNS cache on the local Mac computer, then test the issue again.
    Best Regards,
    Eason Huang
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Eason Huang
    TechNet Community Support

  • Drag and drop documents to Lync 2013 message not working

    I have searched the forum and can't find a reference to my specific issue.  With Lync 2010, I could drag and drop a word document or an excel spreadsheet into the message box.  The recipient would get a message to click on the document to retrieve
    it.  When I do this with Lynch 2013, all that displays in the message is an icon for a word document or an excel spreadsheet . . . the recipient does not receive an actual document that can be opened.
    How do I get Lync 2013 to allow for dragging/dropping like Lync 2010 supported?
    Thanks!

    Hi lac55,
    You can right click the icon, it will prompt you to download the file and the file will be saved under “C:\Users\xxx \Documents\My Received Files”.
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Lync 2013 Mobility not working

    Dear All,
    I have Lync 2013 Server running in my environment. Below are the details,
    1) We have one Lync FrontEnd server as well as one Lync Edge Server installed in Egypt Site & one Lync FrontEnd server as well as one Lync Edge Server installed in Dubai Site in a Single domain.
    Users who are in Egypt site pool are able to login through Lync Mobility but unfortunately users in Dubai Site pool are unable to login through Lync mobility.
    Anyone help would be highly appreciated.
    Thanks & Regards,
    Zeeshan Butt

    Hi Zeeshan Butt,
    You can try to test in the internal network in site Dubai.
    If a user in site Dubai login with mobile externally, the user will connect to the Reverse Proxy. The autodiscover service on Egypt site will search the user information about which pool he belongs and return the right
    external Web service URL of that pool. Then the user will connect to the right pool (Site Dubai) through the Reverse Proxy belongs of Site Dubai.
    You can use Lync Connectivity Analyzer to check if the correct URL of web services have been returned from autodiscover service:
    http://blogs.technet.com/b/nexthop/archive/2013/02/08/the-new-lync-connectivity-analyzer.aspx
    Please also try to login mobile manually to have a test:
    https://<ExtPoolFQDN>/Autodiscover/autodiscoverservice.svc/Root for external access
    https://<IntPoolFQDN>/AutoDiscover/AutoDiscover.svc/Root for internal access
    Note: the ExtPoolFQDN is the External web FQDN of Site Dubai.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Lync 2013 Mobility not working in MultiSite Topology

    Dear All,
    I have Lync 2013 Server running in my environment. Below are the details,
    1) We have one Lync FrontEnd server as well as one Lync Edge Server installed in Egypt Site & one Lync FrontEnd server as well as one Lync Edge Server installed in Dubai Site in a Single domain.
    Users who are in Egypt site pool are able to login through Lync Mobility but unfortunately users in Dubai Site pool are unable to login through Lync mobility.
    External webservices are published on both Sites. Furthermore Dubai Site Pool users are able to login through Lync Client from external but they are unable to login through Lync Mobille Client.
    Anyone help would be highly appreciated.
    Thanks & Regards,
    ZB

    Is lws.abc.com external web url for Egypt site?
    How about lyncaepool.abc.com and communication.abc.com?
    I would like to confirm if you pasted two URLs in IE directly. Here are some tips for troubleshooting the issue.
    For multiple pools, the Autodiscover traffic can be routed to a single Front End pool as long as both pools have their external Web services published. Once a client connects to the Autodiscover service it will be returned the external web service FQDN for
    either pool, depending on which pool the user account belongs to.
    Thus, you must have external Lyncdiscover record pointed to Egypt site. Once Dubai external user connects to Egypt Autodiscover service, it will be returned the external web service for Dubai Site Pool and user connects to Dubai Site Autodiscover service(https://<Dubai
    ExtPoolFQDN>/Autodiscover/autodiscoverservice.svc/Root) and UCWA. We can check if mobile client is able to resolve Autodiscover service URL of Dubai Site by typing the URL into manual configuration of Lync mobile client.
    Here is a great blog about Lync mobility Autodiscover process.
    http://blogs.technet.com/b/nexthop/archive/2012/04/25/lync-server-2010-mobility-deep-dive-autodiscover-service.aspx
    If the issue persists, please paste the result of Lync Connectivity Analyzer for further troubleshooting.
    Kent Huang
    TechNet Community Support

  • Sharepoint 2013 site not working properly in ie8

    Inserting images in sharepoint article pages using Click here to insert a picture from SharePoint  flip away when hovering the text "Layout" in ie8

    Hi Syama,
    For troubleshooting your issue better, please provide more information or some screenshots about your issue.
    Anyway, please add the site into IE Trusted Site, compare the result.
    Add the site into IE compatibility view, compare the result.
    Please test with other browsers, like Firefox or Google, compare the result.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.

    After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.
    This is boot camp problem, because in other normal notebooks (e.g. SONY VAIO, Lenovo with Windows 7) the gadgets are working normally.
    I am attaching the screen shot of Desktop Gadgets and Security updates of Windows 7.
    Kindly solve this issue ASAP.
    Shailendra Gupta
    <edited by host>

    You are not addressing Apple, but a community of unpaid volunteers. So ASAP won't cut it. Also, you should refrain from posting personal information (like your email address) in the body of your comments, as this is part of the community usage guidelines.
    Have you reinstalled the latest Boot Camp Windows 7 drivers, just in case Microsoft overwrote some of them during the Windows 7 security update?
    If you want to communicate issues with Apple about Boot Camp and OS X, click on the link. Just don't hold your breath on receiving a response.

  • Java Script Code not working properly for visios in sharepoint 2013

    Hi all ,
                 I have few visios and I am using the visio web part to display and to redirect from one visio to other visio I am using the java script code through content editor web part . 
    In share point 2010 it's working fine , I was able to redirect to all the visios and code is working fine .
    In share point 2013 its not the same , Its not working properly . only for the first time the code is working fine . once it goes to next visio the code stops working . 
    For example if i click in visio A it gets redirect to Visio B and its stops working , it wont allow to do any other steps . 
    I have checked with the URL its correct , I am not able to find any error also .
    Indresh

    This will be likely caused by the Minimal Download Strategy not registering the Javascript on the page reload. You can turn off the MDS feature to test this.
    You can either turn off MDS in your site, or register your Javascript functions with MDS to ensure they are called. To do this, you'll need all of your code to be wrapped in a javascript file (Embed this on the page using a <script> tag and
    inside that file in a function, which you then register with MDS as follows (I usually do this in the first line of the javascript file):-
    RegisterModuleInit("/SiteAssets/YourJavaScriptFile.js", NameOfYourFunction);
    Regards
    Paul.
    Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

  • Not working properly Computer Browser service in Windows Server 2012

    Good afternoon.
    Migrated from 2003 to 2012 Active Directory, all is good, but the service Computer Browser in Windows Server 2012 is not working properly.
    Online, there are several hundred computers, one network, no segments. PDC is the Master Browser, it is in my list of all the computers, but gives customers or Backup Browser computers only part, and in alphabetical order, giving the first 70 computers and
    all.
    Looked packet sniffer:
    Microsoft Windows Lanman Remote API Protocol 
    Entry Count: 70 
    Available Entries: 251
    So on Master Browser shows 251 computer, and the client 70.
    If disabled on Windows Server 2012 Service Computer Browser, Master Browser is a computer running Windows Server 2003. He gives all computers.
    What is the problem, how to get Windows Server 2012 to work correctly as a Master Browser?

    More info. I have high lighted in bold where the issue is. This is a massive headache for me at the moment
      Frame: Number = 377, Captured Frame Length = 182, MediaType = ETHERNET
    - Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-13-72-52-6E-A1],SourceAddress:[00-1E-0B-2B-68-DD]
      - DestinationAddress: Dell Inc. 526EA1 [00-13-72-52-6E-A1]
         Rsv: (000000..)
         UL:  (......0.) Universally Administered Address
         IG:  (.......0) Individual address (unicast)
      - SourceAddress: 001E0B 2B68DD [00-1E-0B-2B-68-DD]
         Rsv: (000000..)
         UL:  (......0.) Universally Administered Address
         IG:  (.......0) Individual address (unicast)
        EthernetType: Internet IP (IPv4), 2048(0x800)
    - Ipv4: Src = 10.44.46.101, Dest = 10.44.44.14, Next Protocol = TCP, Packet ID = 14025, Total IP Length = 168
      - Versions: IPv4, Internet Protocol; Header Length = 20
         Version:      (0100....) IPv4, Internet Protocol
         HeaderLength: (....0101) 20 bytes (0x5)
      - DifferentiatedServicesField: DSCP: 0, ECN: 0
         DSCP: (000000..) Differentiated services codepoint 0
         ECT:  (......0.) ECN-Capable Transport not set
         CE:   (.......0) ECN-CE not set
        TotalLength: 168 (0xA8)
        Identification: 14025 (0x36C9)
      - FragmentFlags: 16384 (0x4000)
         Reserved: (0...............)
         DF:       (.1..............) Do not fragment
         MF:       (..0.............) This is the last fragment
         Offset:   (...0000000000000) 0
        TimeToLive: 128 (0x80)
        NextProtocol: TCP, 6(0x6)
        Checksum: 0 (0x0)
        SourceAddress: 10.44.46.101
        DestinationAddress: 10.44.44.14
    - Tcp: Flags=...AP..., SrcPort=65372, DstPort=NETBIOS Session Service(139), PayloadLen=128, Seq=1910965363 - 1910965491, Ack=580319796, Win=252 (scale factor 0x8) = 64512
        SrcPort: 65372
        DstPort: NETBIOS Session Service(139)
        SequenceNumber: 1910965363 (0x71E70473)
        AcknowledgementNumber: 580319796 (0x2296FA34)
      - DataOffset: 80 (0x50)
         DataOffset: (0101....) 20 bytes
         Reserved:   (....000.)
         NS:         (.......0) Nonce Sum not significant
      - Flags: ...AP...
         CWR:    (0.......) CWR not significant
         ECE:    (.0......) ECN-Echo not significant
         Urgent: (..0.....) Not Urgent Data
         Ack:    (...1....) Acknowledgement field significant
         Push:   (....1...) Push Function
         Reset:  (.....0..) No Reset
         Syn:    (......0.) Not Synchronize sequence numbers
         Fin:    (.......0) Not End of data
        Window: 252 (scale factor 0x8) = 64512
        Checksum: 0x6F65, Disregarded
        UrgentPointer: 0 (0x0)
        TCPPayload: SourcePort = 65372, DestinationPort = 139
    - Nbtss: SESSION MESSAGE, Length =124
        PacketType: SESSION MESSAGE, 0(0x00)
      - Flags: Add 0 to Length
         Reserved: (0000000.)
         Extension: (.......0)Add 0 to Length
        Length: 124(0x7C)
    - SMB: C; Transaction, Remote Administration Protocol, FileName = \PIPE\LANMAN
        Protocol: SMB
        Command: Transaction 37(0x25)
      - NTStatus: 0x0, Facility = FACILITY_SYSTEM, Severity = STATUS_SEVERITY_SUCCESS, Code = (0) STATUS_SUCCESS
         Code:     (................0000000000000000) (0) STATUS_SUCCESS
         Facility: (...0000000000000................) FACILITY_SYSTEM
         Customer: (..0.............................) NOT Customer Defined
         Severity: (00..............................) STATUS_SEVERITY_SUCCESS
      - SMBHeader: Command, TID: 0x2001, PID: 0x276C, UID: 0x3801, MID: 0x0140
       - Flags: 24 (0x18)
          LockAndRead:     (.......0) LOCK_AND_READ and WRITE_AND_UNLOCK NOT supported (Obsolete) (SMB_FLAGS_LOCK_AND_READ_OK)
          NoAck:           (......0.) An ACK response is needed (SMB_FLAGS_SEND_NO_ACK[only applicable when SMB transport is NetBIOS over IPX])
          Reserved_bit2:   (.....0..) Reserved (Must Be Zero)
          CaseInsensitive: (....1...) SMB paths are case-insensitive (SMB_FLAGS_CASE_INSENSITIVE)
          Canonicalized:   (...1....) Canonicalized File and pathnames (Obsolete) (SMB_FLAGS_CANONICALIZED_PATHS)
          Oplock:          (..0.....) Oplocks NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK)
          OplockNotify:    (.0......) Notifications NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK_NOTIFY_ANY)
          FromServer:      (0.......) Command - SMB is being sent from the client (SMB_FLAGS_SERVER_TO_REDIR)
       - Flags2: 51207 (0xC807)
          KnowsLongFiles:            (...............1) Understands Long File Names (SMB_FLAGS2_KNOWS_LONG_NAMES)
          KnowsEas:                  (..............1.) Understands extended attributes (SMB_FLAGS2_KNOWS_EAS)
          SmbSecuritySignature:      (.............1..) Security signatures enabled (SMB_FLAGS2_SMB_SECURITY_SIGNATURE)
          Compressed:                (............0...) Compression Disabled for REQ_NT_WRITE_ANDX and RESP_READ_ANDX (SMB_FLAGS2_COMPRESSED)
          SecuritySignatureRequired: (...........0....) Security Signatures are NOT required (SMB_FLAGS2_SMB_SECURITY_SIGNATURE_REQUIRED)
          Reserved_bit5:             (..........0.....) Reserved (Must Be Zero)
          IsLongName:                (.........0......) DO NOT use Long File Names (SMB_FLAGS2_IS_LONG_NAME)
          Reserved_bits7_9:          (......000.......) Reserved (Must Be Zero)
          ReparsePath:               (.....0..........) NOT a Reparse path (SMB_FLAGS2_REPARSE_PATH)
          ExtendedSecurity:          (....1...........) Aware of extended security (SMB_FLAGS2_EXTENDED_SECURITY)
          Dfs:                       (...0............) NO DFS namespace (SMB_FLAGS2_DFS)
          Paging:                    (..0.............) Read operation will NOT be permitted unless user has permission (NO Paging IO) (SMB_FLAGS2_PAGING_IO)
          NTStatus:                  (.1..............) Using 32-bit NT status error codes (SMB_FLAGS2_NT_STATUS)
          Unicode:                   (1...............) Using UNICODE strings (SMB_FLAGS2_UNICODE)
         PIDHigh: 0 (0x0)
         SecuritySignature: 0x0
         Unused: 0 (0x0)
         TreeID: 8193 (0x2001)
         ProcessID: 10092 (0x276C)
         UserID: 14337 (0x3801)
         MultiplexID: 320 (0x140)
      - CTransaction:
         WordCount: 14 (0xE)
         TotalParameterCount: 32 (0x20)
         TotalDataCount: 0 (0x0)
         MaxParameterCount: 8 (0x8)
         MaxDataCount: 4200 (0x1068)
         MaxSetupCount: 0 (0x0)
         Reserved: 0 (0x0)
       - Flags: Do NOT disconnect TID
          Disconnect: (...............0) Do NOT disconnect TID
          NoResponse: (..............0.) Server response to the client
          Reserved:   (00000000000000..) Reserved
         Timeout: 5000 milli sec(s)
         Reserved2: 0 (0x0)
         ParameterCount: 32 (0x20)
         ParameterOffset: 92 (0x5C)
         DataCount: 0 (0x0)
         DataOffset: 0 (0x0)
         SetupCount: 0 (0x0)
         Reserved3: 0 (0x0)
         ByteCount: 61 (0x3D)
       - RemoteAPIBuffer:
        - FileName: \PIPE\LANMAN
         - Align: 1 Bytes
            AlignBytes: Binary Large Object (1 Bytes)
           Name: \PIPE\LANMAN
          Pad1: Binary Large Object (2 Bytes)
    - RAPRequest: NetServerEnum2 Request, InfoLevel = 1, SV_TYPE_ALL: All in NSNET
        RAPOpcode: NetServerEnum2
      - ParameterDescriptor: WrLehDz; 4 send, 1 receive parameter
         Param: (W) WORD (send parameter, 16 bit integer)
         Param: (r) Receive buffer (format in data descriptor) (receive data, 0 bit integer)
         Param: (L) Receive buffer length (send/receive parameter, 16/16 bit integer)
         Param: (e) Entries read (receive data, 0 bit integer)
         Param: (h) WORD (receive parameter, 16 bit integer)
         Param: (D) DWORD (send parameter, 32 bit integer)
         Param: (z) ASCIIZ (send parameter, 8 bit integer)
         Param: ASCII NUL (string terminator)
      - DataDescriptor: B16BBDz; data bytes send: 0, receive: 34
       - Datum: (B) BYTE[16] (receive data, 8 bit integer)
          Datum: (B) BYTE (receive data, 8 bit integer)
          Digit: 1
          Digit: 6
         Datum: (B) BYTE (receive data, 8 bit integer)
         Datum: (B) BYTE (receive data, 8 bit integer)
         Datum: (D) DWORD (receive data, 32 bit integer)
         Datum: (z) ASCIIZ* (receive data offset, 32 bit integer)
         Datum: ASCII NUL (string terminator)
      - NetServerEnum2: SV_TYPE_ALL: All in NSNET
         InfoLevel: (1) SERVER_INFO_1
         ReceiveBufferSize: 4200 (0x1068)
       - ServerType: SV_TYPE_ALL: All
          Workstation:      (...............................1) All workstations
          Server:           (..............................1.) All computers with the server service running
          Sqlserver:        (.............................1..) All running Microsoft SQL Server
          DomainCtrl:       (............................1...) All primary domain controllers
          DomainBakctrl:    (...........................1....) All backup domain controllers
          TimeSource:       (..........................1.....) All Time servers
          AFP:              (.........................1......) All Apple File Protocol servers
          Novell:           (........................1.......) All Novell servers
          DomainMember:     (.......................1........) All LAN Manager 2.x domain members
          PrintqServer:     (......................1.........) All print servers
          DialinServer:     (.....................1..........) All dial-in servers
          ServerUnix:       (....................1...........) All Unix/Xenix servers
          NT:               (...................1............) All Windows NT workstations or servers
          WFW:              (..................1.............) All Windows for Workgroups servers
          ServerMFPN:       (.................1..............) All Microsoft File and Print for NetWare servers
          ServerNT:         (................1...............) All non-domain controller servers
          PotentialBrowser: (...............1................) All servers that can run the browser service
          BackupBrowser:    (..............1.................) All backup browsers
          MasterBrowser:    (.............1..................) All master browsers
          DomainMaster:     (............1...................)  All domain master browsers
          Reserved1:        (..........11....................)
          Windows:          (.........1......................) All Windows 95 or later
          DFS:              (........1.......................) All DFS root servers
          ClusterNT:        (.......1........................) All NT Clusters
          Terminalserver:   (......1.........................) All Terminal Servers
          ClusterVSNT:      (.....1..........................) All NT Cluster Virtual Server Names
          DCE:              (....1...........................) AllIBM DSS (Directory & Security Services)
          Reserved2:        (...1............................)
          AlternateXport:   (..1.............................) Return list for alternate transport
          LocalListOnly:    (.1..............................) Return local list only
          DomainEnum:       (1...............................) Enumerate primary domain
         Domain: NSNET
    Then the reply;
        Frame: Number = 378, Captured Frame Length = 1514, MediaType = ETHERNET
    + Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-1E-0B-2B-68-DD],SourceAddress:[00-13-72-52-6E-A1]
    + Ipv4: Src = 10.44.44.14, Dest = 10.44.46.101, Next Protocol = TCP, Packet ID = 27036, Total IP Length = 1500
    + Tcp: Flags=...A...., SrcPort=NETBIOS Session Service(139), DstPort=65372, PayloadLen=1460, Seq=580319796 - 580321256, Ack=1910965491, Win=253 (scale factor 0x8) = 64768
    + Nbtss: SESSION MESSAGE, Length =2013
    + SMB: R; Transaction, Remote Administration Protocol
    - RAPResponse: NetServerEnum2 Response, Count = 31
        Win32ErrorCode: 0x00000000 - ERROR_SUCCESS - The operation completed successfully.
        Converter: 2251 (0x8CB)
      - NetServerEnum2: Count = 31
         EntriesReturned: 31 (0x1F)
         EntriesAvailable: 31 (0x1F)
       + NetServerInfo1: APOLLO
       + NetServerInfo1: ARTEMIS
       + NetServerInfo1: ASKLEPIOS
       + NetServerInfo1: CASTOR
       + NetServerInfo1: DCC4503-131L
       + NetServerInfo1: DCC4503-155L
       + NetServerInfo1: DCC4503-157L
       + NetServerInfo1: DCC4503-161L
       + NetServerInfo1: DCC4503-171L
       + NetServerInfo1: DCC4503-172L
       + NetServerInfo1: DCC4503-175L
       + NetServerInfo1: DCC4503-177L
       + NetServerInfo1: DCC4503-183L
       + NetServerInfo1: DCC4503-184L
       + NetServerInfo1: DCC4503-185L
       + NetServerInfo1: DCC4503-188L
       + NetServerInfo1: DCC4503-196L
       + NetServerInfo1: DCC4503-197L
       + NetServerInfo1: DCC4503-199L
       + NetServerInfo1: DCC4503-202L
       + NetServerInfo1: DCC4503-203L
       + NetServerInfo1: DCC4503-205L
       + NetServerInfo1: DCC4503-210L
       + NetServerInfo1: DCC4503-213L
       + NetServerInfo1: DCC4503-219L
       + NetServerInfo1: DCC4503-220L
       + NetServerInfo1: DCC4503-228L
       + NetServerInfo1: DCC4503-233L
       + NetServerInfo1: DCC4503-234L
       + NetServerInfo1: DCC4503-236L
       + NetServerInfo1: DCC4503-241L
        StringData: Binary Large Object (586 Bytes)

  • XFCE4 not working properly display X as cursor not arrow pointer

    Hi all
    I have recently installed arch and XFCE4 as my desktop environtment everything went well for a few days.
    But all sudenl 2 days ago thing appeared not working properly. Things displayed on my desktop are out of proporion mainly the X as cursor instead of an arrow, newly opened windows default to top right cornner overlap my taskbar panel not able to move this. I've tried to re-install xfce4 but weren't sure I did it correctly.
    tried :
    pacman -Rdd xfce4 xfce4-goodies
    rm -R ~/.config/xfce4
    then reinstall problem still occurs.
    Any suggests and help would be greatly appreciated.
    thx
    Last edited by archlux (2013-06-23 14:29:01)

    Be sure you cursor theme is complete. Which one are you trying to use? Did you try setting it up from directly X confs?
    There must be an option in window manager or window manager tweaks about overlapping taskbar. You can use alt+left mouse to move your windows till it is configured.
    Reinstalling is as meaningless as deleting system32. If you are out of options, just delete your .config folder then reinstall.?
    Last edited by Gulver (2013-06-23 17:59:47)

  • HT1338 i think my java is not working properly what do i do

    i think my java is not working properly what do i do

    Java 7 updated  for 10.7-10.8
    Released Feb 1, 2013,  fixes 50+ security flaws
    http://www.esecurityplanet.com/patches/oracle-responds-to-java-security-flaws-wi th-50-fixes.html
    Download and install
    https://www.java.com/en/download/faq/java_mac.xml
    For Java versions 6 and below OS X 10.5-10.6 machines
    Apple supplies their own version of Java. For Mac OS X 10.6 and below, use the Software Update feature available under the Apple menu to check that you have the most up-to-date version of Java 6 for your Mac.
    https://www.java.com/en/download/faq/java_6.xml
    Java SE 6 End of Public Updates
    After February 2013, Oracle will no longer post updates of Java SE 6 to its public download sites. We highly recommend downloading and installing Java 7.
    If your considering upgrading OS X from 10.6.8 to 10.8 via AppStore to run Java 7
    Be forewarned no PowerPC based programs or driver software will run any longer.
    Check here BEFORE you upgrade OS X!
    http://roaringapps.com/apps:table
    Alternatives if you must run Java 7
    If Apple disabled Java 6 in 10.6, and you can't upgrade OS X to 10.8, then your pretty much done with Java in OS X because Oracle won't issue updates for Java 6 anymore.
    However you can install Windows 7 and continue to use Java 7+ there until support for Windows 7 ends in 2020.
    Windows in BootCamp or Virtual Machine?
    If your on 10.6, I very highly recommend the free Virtualbox for the virtual machine software as it gets updates, VMFusion and Parallels have moved on with only 10.7+

  • Export Button not working properly in custom OAF page.

    Hi,
    I have a custom page with a table region is there. There is an export button which exports the rows in an excel sheet.
    But it is not working properly, as all the rows are not getting extracted.
    Properties set for the export button::
    Export all rows :: False
    Any sugestion is highly appreciated.
    Regards,
    Arindam.

    Hi Arindam,
    Refer below links.
    Mukul's Oracle Technology Blog: Implementing Export Button Functionality Programatically
    http://dilipoaf.blogspot.in/2013/02/export-selected-rows-data-functionality.html
    Thanks,
    Dilip

  • After doing last Mavericks update, Messages is not working properly

    Since yesterday, after doing last Mavericks update, Messages is not working properly - the Dock icon is not bouncing nor showing any number for new messages. Very annoying, since I usually have Messages on background while working and I now i don't realize if people is chatting me unless I open the messages wondows.

    Hi,
    Check System Preferences > Notification is set for Messages
    In Messages > Preferences > General Section change the Sound option for Message Received.
    Restart the app and test this sound is (still) playing.
    Place app in background an iMessages "yourself" form your iPhone.
    Does the sound Play ?
    10:18 pm      Wednesday; November 13, 2013
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Organizer not working properly, please advise.

    The organizer imported all the thumbnails of my photos from my photo file but when i go to open that photo up it cant connect or find it. it does a "search" but its not found. i know my photos are there because i can open them directly from the photo file when i clich "Open with Elements Editor". I tried uninstalling /reinstalling, makingf sure no other programs are running. I would like to the Organizer as it is advertised. Any suggestions???? Thanks sara

    thanks will try!! & let you know what happens! sara
    Date: Mon, 28 Jan 2013 04:26:43 -0800
    From: [email protected]
    To: [email protected]
    Subject: Organizer not working properly, please advise.
    Re: Organizer not working properly, please advise. created by andaleebfatima1 in Photoshop Elements - View the full discussion
    Please launch Organizer and follow as per this screenshot-
    http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5027512-290342/450-270/28-Jan- 135-53-11PM.jpg
    Thanks
    Andaleeb
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5027512#5027512
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5027512#5027512
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5027512#5027512. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Illustrator CC Not working properly

    I uninstalled Illustator 6 because I use Illustrator CC now.  Now I'm getting an error everytime I open Illustrator CC.  My question.....do I need Illustrator 6 installed in order for Illustator CC to work properly?

    It's up & running fine so far.  Thanks so very much for responding  so
    quickly.  I thought I was typing a question in a search  engine.....lol  I
    didn't know it would be something you needed to respond  to.  Thanks again.
    Tons of  hugs.
    Brenda
    In a message dated 8/11/2013 4:02:42 P.M. Central Daylight Time, 
    [email protected] writes:
    Re:  Illustrator CC Not working properly
    created by Monika Gause (http://forums.adobe.com/people/Monika+Gause)  in
    Illustrator - View the full  discussion
    (http://forums.adobe.com/message/5582281#5582281)

Maybe you are looking for

  • How do I find lost photos after Image Capture failed to import them to iPhoto?

    im having this problem exactly .... http://hints.macworld.com/article.php?story=20101215095521610 i chose to delete after import, like a wise guy, thinking nothing was going to happen and now my photos are not in my iPhoto libary... ive gone through

  • Database Back Up error In SQL Server

    Hi SAP GURUS, I am facing the the backup related issues in production server BRTOOLS is also not working in the system as it is not showing the EXE file in Usr/SAP/SID/... So mean while we are taking backup manually !!! My OS is Windows 2003 Server a

  • Download multiple XML files from SXMB_MONI and / or RWB

    Hi Does anyone have a clever way to download multiple inbound / outbound XML messages from either SXMB_MONI and / or RWB. For example, I send in 100 XML files to XI. These are mapped to an IDOC. I want to download all 100 source and target XML messag

  • Getting attachment name from email endpoint

    What would be the parameter to get the attachment name from using the Email endpoint ?

  • "emails to all names in a group"

    When I try to email all the names in a group I've created in my contacts, it will only take the first 3 names in the group.  Is there something else I need to do.  I have 50 names in this group I would like to email all at once.