Lync 2013 migraiton from old domain (contoso.local) to new domain (contoso.co.uk)
Hi Team,
The following is our requirement and environment, please advise.
Environment 1
Domain1 : Contoso.local
Lync 2013 onpremise server
Environment 2
>> Created the following domain in New AD environment and built new lync machines.
Domain 2: Contoso.co.uk
Lync 2013 onpremise server
Requirement:
1. Wanted to move all configuration (DialPlans, VoicePolicy, Users, ResponseGroups, etc) from the old AD to the new AD on the newly built lync machines.
2. Prepared PowerShell script to get this done.
3. Plan is to export the configuration to the new servers and import those exported config files on the new machines.
Question:
1. Will it work if AD domain is different on each of those servers? Old server has contoso.local and new one has contoso.co.uk.
2. What are the impacts and will we be able to get this done?
I assume that those are different AD forests?. Even though it's different forest, you can export the Voice routing components, RGS components and import that in to the new setup and it will work fine. For RGS, you need to re assign the agents to the agent
groups after importing to the new server. And also, you can export the buddy list of the users and then import that in to the new Lync server as well upon enabling the users. I have done the same setup just exporting and importing using the Lync control panel.
Not sure what's the script that you're talking about.
http://thamaraw.com
Similar Messages
-
Lync 2013 installation on 2003 domain with 32bit DC
I am currently installing Lync 2013 into a 2003 domain. I only have 32bit DC so i am wondering if the AD Prep will work with the Lync install on server 2012?
Hi,
You can deploy Lync Server 2010 in a forest or domain where domain controllers run 32-bit versions of some operating systems (for details, see Active Directory Infrastructure Requirements). However, you cannot use the Lync Server Deployment Wizard to run
schema, forest, and domain preparation in these environments because the Deployment Wizard and supporting files are 64-bit only. Instead, you can use ldifde.exe and the associated .ldf files on a 32-bit domain controller to prepare the schema, forest and domain.
More details:
http://blogs.perficient.com/microsoft/2012/01/lync-server-schema-preparation-in-an-environment-with-32-bit-schema-master/
http://rlevchenko.com/2013/05/31/lync-2013-error-backcompatschema-ldf-failed-the-exit-code-is-8224/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support -
Transferring content from old apple ID to a new one?
As question says I need help transferring content from old apple ID to a new one as my old apple ID was reported for spam and now I can't use it, thanks!
[email protected]Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
FAQs http://support.apple.com/kb/HE37
However... To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Balance transfer from old recon a/c to new recon a/c
Hello
We have changed the vendor''s reconciliation account.....now we have to transfer the balance of open items....from old recon a/c to new one..........
....what is the best way to do this.......
regardsIt says:
A balance sheet eadjustment distributes
receivables and payables in customer and vendor reconciliation accounts,
Account Determination
For each account, you can specify an adjustment account to post the readjustment to. Otherwise, the system posts the readjustment to the original account.
To distinguish readjustment postings from other postings, you should create separate adjustment accounts and have the readjustments posted to them.
Since reconciliation accounts cannot be posted to directly, you have to specify adjustment accounts for them.
Since readjustments are posted without tax, the accounts posted to cannot be relevant to tax.
Adjustment accounts are determined when calculating the distribution.
Can you please check the configuration in OBBW.
Define Adjustment Accounts for Changed Reconciliation Accoun
In this activity you define the numbers of the accounts for the automatic transfer postings which are made if the reconciliation accounts are changed. Postings are made to these accounts to sort the open items.
Sorting open items is necessary to be able to display the receivables and the payables according to the legal requirements for creating balance sheets.
Activities
1. Enter the required accounts.
2. Make sure that the accounts you enter are created. -
Can I merge ical from old, non cloud Mac with new one?
Can I merge ical from old, non cloud Mac with new one?
I cannot sync from old G5 so if I backup that iCal, can I merge it with new iCal on my new Mac without losing new Mac calenday details?
Thanks.
JeffJeff,
First, iCloud: How to back up iCloud data.
Next, use iCal>File>Export>Export...for the calendar that you want to use for the export. Move the .ics file to your new computer, and double click the file. You will be offered a choice of creating a new calendar in iCloud, or importing to an existing calendar. Make the appropriate choice for your circumstances. -
Migrated Aperture 3 upgrade from old Mac Book Pro to new Mac Book Pro. Can't open Aperture on new machine because I don't have the original serial number for Aperture 2 program originally installed on the old machine. What is the best solution to this situation
Call Apple and make a appointment.
You have 3 months of care and up to 3 years with paid AppleCare, let them handle it and bring everything in.
Good Luck -
How do I upload all my apps, calendars, etc from old iPad and iPhone to new iPad air?
provided you are using the same Apple ID
for Apps
just launch the App Store App
tap on Purchased at the bottom of the page.
tap on particular Apps you want to download and install..
for other items
launch the Settings App
scroll left pane down a bit, just below Privacy
tap on iCloud
Turn on iCloud sharing for particular items
Contacts, Calendars, Mail, Safari (favorites)
Turn on iCloud sharing on your old devices and your new devices.
Wait 10 or 15 minutes, or so depending on your WiFi network..
You should start to see these shared items appear on your new device..
You can turn iCloud sharing off on your old devices (and new device)
after you are confident enough items have transferred. -
How to transfer ring tones from old PC itunes library to new PC itunes library
I have upgraded my computer and am in the process of importing the music, apps, audiobooks, etc from my old computer & iTunes library to my new computer. I am using the HomeShare feature to do the import and it has worked flawlessly for everything except ringtones. When I access my ringtones in the old library, the "Import" button does NOT appear in the lower right hand corner like it does for music, apps, etc. So, how then do I transfer my ringtone library from the old iTunes library to the new one??? Thanks for any and all help.
MlePatron wrote:
Unfortunately iTunes won't let you just "Copy" and "Paste" out of the library. However, you can drag and drop files from your library into a USB drive and then drag and drop them from the USB drive into the new library.
This is not the best way to do it,
As dieselvdub noted, just copy the entire /Music/iTunes/ folder from old computer to /Music/ on new computer.
Then is is an exact duplicate of the old library (same ratings, artwork, playlists, date added, # plays, etc.), not just a new library with all content -
I tune migration with library and data from old laptop with XP to new laptop with windows 7
Hello.
I would like to best way to move my existing data on itunes including library, photo, music, movies from old laptop of XP to new laptop on windows 7.
I downloaded new version of i tunes in my new laptop and not sure how to migrate entaire data and synch with new laptop, pls guide asapType "move itunes library" into the google search bar.
Copy everything else ( calendars/contacts/pics/files/docs) as well. -
I messed up migrating from old iMac to my shiny new one. I didn't turn off power saver. How do I start again, it's all gone wrong, help
Boot into recovery mode, launch Disk Utility and wipe the HD. Quit DU and restore the OS. On first boot, migrate properly, using the steps in Pondini's Setup New Mac guide.
-
Lync 2013 credentials problems on domain computers
Hi folks,
We are having trouble with Lync 2013 and credentials on our domain computers. We have been using Office 365 and Outlook for our email for a couple years and it has worked well enough, so recently we decided we wanted to start using Lync as well. We deployed
the Office 365 Pro Plus suite available to us through our Office 365 subscription and signed in. The first sign-in went as expected. It asked for a username and password, asks if it should remember those credentials for next sign-in (yes), then connects and
everything with Lync itself functioned normally. Subsequent sign-ins have not been normal.
When a user restarts their computer and launches Lync it remembers their user name but not their password. Once they type their password in it asks if it should remember those credentials for next sign-in again, then connects. If a user exits and re-launches
Lync without restarting it remembers their credentials and signs in properly, but then immediately a popup box appears saying that "Credentials are required" in order for Lync to get calendar information from Outlook ( http://i.imgur.com/hqcK426.png
We know the problem is only happening with computers on our domain, but we don't know why. I tested things out on my home desktop and network by installing Office 365 Pro Plus, setting up Outlook, and then Lync. Both Outlook and Lync auto-discovered everything
normally after getting my credentials and Lync behaves as expected every time the program launches. I then brought my personal laptop in and tried the same thing on my work network to see if it is network related, but Lync behaves normally on that computer
as well.
I originally worked on the problem at the Office 365 Community Forums ( http://community.office365.com/en-us/f/166/t/246014.aspx ), but after we isolated the problem to something with the domain computes I was told that they could not help me any further
and was referred here. Does anyone have any ideas as to what is keeping Lync from behaving properly on our domain computers? We have a mix of Windows 7 x64 and Windows 8.1 x64 computers, all joined to the same domain and with the same basic suite of software.
Thanks,
~Misharum
PS: How do I verify my account? The outlook.com email address has been verified, but I don't see anywhere to do verification in my TechNet profile here.Yeah, the clients are fully patched. I put a support ticket in through Office 365 and the rep there was able to help me. It ended up being two separate problems.
Lync was not remembering my credentials to automatically log me in between restarts:
Installed the latest version of the Microsoft Online Services Sign-In Assistant.
After signing signing into Lync another popup appeared asking for credentials again to access calendar information. (two steps to solve this one).
In Active Directory Users and Computers, open up the properties of each affected user, go to the Attribute Editor tab, find and double click the proxyAddress attribute, and add in
sip:[email protected] where the userid is the user's login name and domain.com is your domain. I'd imagine this is scriptable in PowerShell but I don't know enough to do it.
Then on the computer that the users will be using, while the user is logged in, add a dword of NoDomainUser = 1 in the registry at HKCU\Software\Microsoft\Office\15.0\Common\Identity. The most sensible way to do this in my mind is with a group policy so
it will get written to each user's registry under their profile when they log in.
After doing all of this Lync remembered my credentials between restarts, signed me in automatically, and only gave that credentials popup on the first sign-in after applying both changes in step 2. -
Lync 2013 migration from Lync 2010
Hi All,
I have a problem after I've successfully migrated our Lync environment from Lync 2010 (what was migrated from OCS 2008 R2) to Lync 2013.
When I would like to delete the old Lync 2010 Front End server from the topology I cannot do that, because there are some TrustedApplicationPool registered to that. And I cannot delete this unused TrustedApplicationPools, because I got the following error:
"Remove-CsTrustedApplicationPool : Cannot remove legacy trusted application pool. Use the legacy tools to remove the pool, then run Merge-CsTopology."
I've tried that many ways, I've tried the merging etc. but it was unsuccessful. Has anybody any idea, step-by-step or something what can helpful to me?
Many thanks,
Tamás DobosHi,
Did you check this step by step migration lync 2010 to 2013
http://www.oiboran.com/?p=1073
To remove Trusted application pools
Get-CSTrustedApplicationPool
Remove-CSTrustedApplicationPool -Identity nameofthepool
Removing Lync 2010
http://terenceluk.blogspot.nl/2012/12/removing-lync-server-2010-standard.html
Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question. -
Lync 2013 IM from full Lync client to Apple Iphone 4S
Hi,
We are running Lync 2013 and Lync 2010 in coexistence. When sending an IM from a fully Lync client (Lync 2013 homed user) to an Apple Iphone 4S with the latest Lync 2013 mobile app installed and the user chooses not to read the notification or misses it
an error is shown on the senders Lync window - is this by design or an error?
This message may not have been sent to Lyncuser1 because the server timed out.
On the server monitoring reports the following events are logged for client and server:
24116; Component="RTCC/5.0.0.0_UCWA/5.0.0.0 iPadLync/5.4.1485.0000 (iPad iPhone
OS 7.0.3)"; Reason="The request was rejected because the application did not
respond to the incoming call and it was not the preferred endpoint.";
1
13004
FEservbeer.domain.com.net
InboundRouting
13004; reason="Request was
proxied to one or more registered endpoints"; source="FEserver.domain.com";
Count="2"; appName="InboundRouting"
Please advise f this is something we should be concerned about as the message does get received by the iphone user but the sender gets a message that indicates it may not have reached the iphone user.
Cheers
DHi,
Did the issue happen both clients internal the company or external the company?
Please check if the both of the tested users could see the presence of each other normally.
Please try to log off Lync Mobile client and then log back on again to test the issue again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
We have migrated machines using ADMT tool but we have found some window 7 machines Group policy issues. We see that the computer GP is getting from the new domain but the users profile still has the old domain GP information. Any help on
removing the old GP objects and forcing the new domain User policy would be great. We have tried the basic troubleshooting gpupdate /force reboot etc.
ThanksHi,
Sorry for the delayed response.
First, please verify whether these domain users you mentioned belong to old domain or new domain.
If they belong to old domain the GP is right with no problem. If they belong to new, try following suggestions.
Please test these steps in one of the problematic computer. If it worked, then go on for others.
To avoid unexpected problems, please backup your register keys before following steps:
Open regedit.exe, and delete following keys:
HKLM\Software\Policies\Microsoft Key (looks like a folder).
HKCU\Software\Policies\Microsoft Key.
HKCU\Software\Microsoft\Windows\CurrentVersion\Group Policy Objects Key.
HKCU\Software\Microsoft\Windows\CurrentVersion\Policies key
Exit the registry and restart.
Note: HKLM = HKEY_LOCAL_MACHINE & HKCU = HKEY_CURRENT_USER
If you have any feedback on our support, please click
here
Keep post.
Kate Li
TechNet Community Support -
Lync 2013 & Active Directory Intra Domain Migrations
Hi all,
Hopefully this is the correction forum to ask. Suppose the following scenario
Parent Domain containing Lync 2013 Servers
Child domains consisting of user accounts
It is intended that child domains containing Lync 2013 enabled users be migrated to the parent domain.
A few questions
Is it possible to migrate user accounts to another domain and configure the migrated (technically new) account to link back to Lync so as to retain contact information?
Or prior to migration have contacts exported so they can be imported into the new Lync 2013 accounts?
Thanks,Within a single forest it quite possible to have Lync installed in one domain and User a part of another domain
All we have to do during the Lync server install process run the domain prepaerationn wizard for all the domain weher we shall either have Lync user object or Lync server object
Please refer http://technet.microsoft.com/en-us/library/gg398630.aspx
I believe As long as the user SIP URI Doesn't change you can export the user data information and after the migration if you can import in user information
Please refer http://technet.microsoft.com/en-us/library/jj204897.aspx
PLEASE REMEMBER, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answered"
Maybe you are looking for
-
Hp w7707h monitor goes to sleep on startup ?
can anyone help me fix my hp w7707h monitor that goes to sleep on startup ?
-
Pagination and Reset Pagination
I do not understand what pagination means and what "reset pagination" does. I think I need an example where I can observe the difference between using or omitting a pagination reset. I created a page with a report and a search tool. Apex created auto
-
Only some pictures have preview images in 'Years' view
Has anyone else encountered a problem where many pictures have a preview image, but no matter how long you leave Photos running, some pictures' preview image is just a grey square? Is there any way to manually make Photos go through and build preview
-
Import Pictures to the Contacts
How can I import also the pictures from the Microsoft Outlook 2003 Contact profile to the iPod Contact? I see all details and informations from the Outlook profile, but not the picture. who can help me? I have an Video iPod
-
Error tmboot LIBTUX_CAT:297
Hi, I got the following problem on Solaris 2.6(8) with tuxedo 7.1 creating the TLOG file works fine. But when I'm starting the Application with tmboot I got the following error. I deleted the TLOG before as a mistake!!! 160836.acus97!BBL.13984.1.0: L