Lync 2013 migration from Lync 2010

Hi All,
I have a problem after I've successfully migrated our Lync environment from Lync 2010 (what was migrated from OCS 2008 R2) to Lync 2013.
When I would like to delete the old Lync 2010 Front End server from the topology I cannot do that, because there are some TrustedApplicationPool registered to that. And I cannot delete this unused TrustedApplicationPools, because I got the following error:
"Remove-CsTrustedApplicationPool : Cannot remove legacy trusted application pool. Use the legacy tools to remove the pool, then run Merge-CsTopology."
I've tried that many ways, I've tried the merging etc. but it was unsuccessful. Has anybody any idea, step-by-step or something what can helpful to me?
Many thanks,
Tamás Dobos

Hi,
Did you check this step by step migration lync 2010 to 2013
http://www.oiboran.com/?p=1073
To remove Trusted application pools
Get-CSTrustedApplicationPool
Remove-CSTrustedApplicationPool -Identity nameofthepool 
Removing Lync 2010
http://terenceluk.blogspot.nl/2012/12/removing-lync-server-2010-standard.html
Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question.

Similar Messages

  • Step by Step Migration from Lync Server 2010 to Lync Server 2013

    Hi All,
    I just finished migration from Lync Server 2010 to Lync Server 2013 (for enterprise servers) in my lab environment. After that I started to write article series that contains five parts. You can see below first three parts and I think , I will upload
    rest of parts until this weekend.
    Part 1 - http://www.oiboran.com/?p=1073
    Part 2 - http://www.oiboran.com/?p=1109
    Part 3 - http://www.oiboran.com/?p=1140
    Hope to be useful,
    Regards
    Part 4 http://www.oiboran.com/?p=1171
    Part 5 http://www.oiboran.com/?p=1219 (added on 20.12.2012)
     

    It's working for me now, so maybe it's back up.
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer" | Blog
    www.lynced.com.au | Twitter
    @imlynced

  • Migration to Lync 2013 - Unable to remove 2010 Edge Server

    Hi
    We did a migration from Lync 2010 to Lync 2013. Everything worked without any problems. But now we are unable to remove the Lync 2010 Edge Pool. Everything has been done according to
    https://technet.microsoft.com/en-us/library/jj205369.aspx “Migration from Lync Server 2010 to Lync Server 2013”.
    I am able to remove the 2010 Edge pool, but by trying to publish the topology, I receive the following error: “Error: An error occurred: "System.InvalidOperationException" "Cannot publish topology changes. Call orbit still
    exists on one or more deleted application servers."
    How can I resolve this error?
    Regards
    Peter

    Hi Peter,
    You have to change the Call Park Destination FQDN to the Lync 2013 Pool.
    Please check out the following article.
    Migrate Call Park application settings
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Lync 2010 to Lync 2013 migration - Dialin conferencing

    While migrating from Lync 2010 to Lync 2013, i have stopped all services on the Lync 2010 servers to make sure all is okay and everything is working fine with Lync 2013.
    Nevertheless, when someone on Lync 2013 schedule a meeting, and someone dial one of the PSTN Dialin conference number and enter the conference ID, this scenario is not working.
    If i start the Lync 2010 front end services, then the previous scenario works.
    So i did something else. I have scheduled a meeting and i change the meeting options to get a new conference ID. this makes the conference work over dial in pst number while Lync 2010 services are down.
    This means:
    - When someone (Lync 2013 user) schedule a meeting, the default conference ID that is generated, requires the existence of Lync 2010 services for a PSTN Dial in user to connect
    -When someone (Lync 2013 user) schedule a meeting and change the meeting options to get a new conference ID, then the PSTN Dial in user can connect even if all Lync 2010 services are down.
    Any clue?
    ammarhasayen

    i have found it. moving the conference directories from Lync 2010 to Lync 2013 solves the whole thing.
    ammarhasayen

  • OCS 2007 to Lync 2013 migration approach & steps

    Hi,
          I am looking for migration approach from OCS 2007 (not OCS 2007 r2) to Lync 2013 for 4000 users. as per the MS technet its not supported. has anyone tried and tested if yes please provide the steps and risk involved. thanks

    Hi Nmits,
    Since it is not supported to migration from OCS 2007 to Lync server 2013 directly, you have two ways to complete the migration process:
    Migration from OCS 2007 to OCS 2007 R2 first, then migration from OCS 2007 R2 to Lync server 2013.
    Migration from OCS 2007 to Lync server 2010 first, then migration from Lync server 2010 to Lync server 2013.
    Migration from OCS 2007 to OCS 2007 R2:
    http://technet.microsoft.com/en-us/library/dd572505(v=office.13).aspx
    Migration from OCS 2007 to Lync server 2010:
    http://www.microsoft.com/en-in/download/details.aspx?id=7327
    http://blogs.technet.com/b/nexthop/archive/2011/05/23/migrating-from-office-communications-server-2007-to-lync-server-2010.aspx
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Exclude Excel 2013 interop from Lync 2013 updates

    Is it possible to Exclude Excel 2013 interop from Lync 2013 updates? We have Excel 2010 installed and have custom COM applications that use Excel 2010 interop to automate it. When Lync 2013 is installed/updated it installs Excel 2013 interop and causes
    the COM application to not recognize the Excel 2010 interop without manually deleting the Excel 2013 interop from the registry.

    When you run setup.exe from Office 2013 installation media, you can customize installation and make Excel 201 not available to install.
    Lisa Zheng
    TechNet Community Support

  • Lync 2013 clients behind TMG 2010

    Hi
    My escenario is as follow
    Lync Client 2013 --> TMG 2010 --> ISP Router (without fillter ports)
    I have a problema with this escenario because TMG drop me the voice calls and sudendly drop me the connection with the server.In TMG i created the following rullo
    From internal to external, and URL Set (*.microsoftonline.com,
    *.microsoftonline-p.com , *.onmicrosoft.com, sharepoint.com, *.outlook.com )
    Protocols: http, htpps, RTP, SIP, Sip Server, Sips, Sips Server,
    50040-50059 TCP Outbound
    50000-50019 UDP Send Receive
    3478 UDP Send Receive
    59999 UDP Send Receive
    50020-50039 UDP Send Receive
    So what is the problema with this TMG 2010 (with all updates, SPs and rollouts)
    Thanks

    Hi,
    The following blog might help.
    http://www.jaapwesselius.com/2012/12/21/publish-lync-2013-services-in-tmg-2010/
    (Note: Microsoft provides third-party contact information to help you find technical support. This contact
    information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • After Migrating from Sharpoint 2010 to Sharepoint 2013 list filter options changed

    Hi All,
    After migrating from SP 2010 to SP2013 i found list View filter option is changed and filter is not working Pls help its really urgent.... you can check field 1 and field 2 in following screen shot.
    Prasad kambar

    Hi  ,
    According to your description, my understanding is that your list filter cannot work after Migrating from SharePoint 2010 to SharePoint 2013.
    For your issue, please check your log files for any issues. Also you can refer to the blogs for troubleshooting SharePoint 2013 migration:
     Firstly try running Test-SPContentDatabase on your source database for any issues -
    Test-SPContentDatabase - http://technet.microsoft.com/en-us/library/ff607941.aspx
    Troubleshoot site collection upgrade issues in SharePoint 2013 http://technet.microsoft.com/en-us/library/jj219648.aspx
    Verify database upgrades in SharePoint 2013 -http://technet.microsoft.com/en-us/library/cc424972.aspx
    And please have a look at your custom solution on your site.
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • OWA still lands at Exchange 2010 for users migrated from Exchange 2010 to 2013

    I never had any issues with OWA redirection for a few users that I migrated from Exchange 2010-2013 initially. For users that I am migrating in the past few days, the OWA 2013 is landing on Exchange 2010 despite the mailbox being successfully migrated to
    Exchange 2013.
    Troubleshooting:
    1. I have restarted the IIS Services
    2. I have restarted MSExchangeOWAAppPool.
    3. I have also checked the homeMDB attribute of the 2013 migrated user with the Exchange 2013 database.
    I would really appreciate if anyone could share their experiences on similar issues.

    I have checked it, the migration status is completed. In regard to the namespaces, both CAS 2010 and 2013 are set to mail.domain.com; CAS 2013 is the internet facing. I have also checked the internal access for OWA, it's the same scenario. Migrating them
    back to 2010 and 2013 won't resolve the issue in my case, because the issue persists for every new user that I am migrating.
    I recently found the following when I login with a user who is not effected and then logout:
    1. Login in back with the affected user without closing the browser or clearing the cache, it lands at CAS 2013 OWA.
    2. However, I get the below listed error message when I logout. 
    Your request couldn't be completed.
    Click here to continue working.
    This may have occurred for security reasons or because your session timed out.

  • Planning a migration from Exchange 2010 to Exchange 2013

    Hello,
    I am planning a migration from Exchange 2010 to Exchange 2013 and I was wondering if there was a good guide on the UM migration. I haven't found one that isn't confusing as heck.

    Hello,
    Is there any update?
    If
    you have any feedback on our support, please click here
    Cara Chen
    TechNet Community Support

  • Exchange 2013 Migration from 2010 Test (Shared split DNS)

    Hi
    Im testing a migration from Exchange 2010 to 2013. I have tried to run a single DNS name to both servers, so externally mail.test.com resolves to the external IP and that NAT's to the new Exchange 2013. Then internally mail.test.com resolves both to EXC13
    and EXC10 ip adresses (Round Robin).
    I have moved some mailboxes to 2013. If the IP resolves to the new Exchange and i try to login to a mailbox on the old server i get redirected as im supposed to. If the IP resolves to the old Exchange and i try to login with a mailbox on the new server i
    get:
    A server configuration change is temporarily preventing access to your account. Please close all Web browser windows and try again in a few minutes. If the problem continues, contact your helpdesk.
    Should this be possible, or do i need to change the intarnal URL on all virtual directories on the old server to the local netbios name or what to do?

    You should never use the server name in any of the URLs.  You should use either a CNAME or a load-balanced VIP with a generic name like mail.company.com or webmail.company.com.  Then you just point this name to the new server.  If
    you're currently using a server name, it's about time to change that first before trying to switch to Exchange 2013.
    Curently im using a generic name, mail.test.com. But that's just a normal A record on the internal DNS. So i cannot use that on both?

  • HT204350 Migrating from a 2010 MBP to a 2013 iMac - stuck halfway through???

    I have begun migrating from a 2010 MBP to a 2013 iMac after installing mavericks on both. They are connected by ethernet. The MBP isn't updated to the latest version because it was installed from a previous copy from apple. The migration has started and is stuck on 1 hour19 mins, what should i do? is it safe to somehow stop the migration process? or is it best to leave it be for a few hours or something? i had a lot of trouble starting the process as i had to try multiple times to get it to locate all the files and folders on the MBP. Thanks for the help.

    Welcome to Apple Support Communities
    Leave it for some minutes to see if the migration process continues. If not, simply turn off both Macs, turn them on and transfer the files again.
    If the migration gets stuck again, consider the option of making a Time Machine backup of your old MacBook Pro onto an external drive, and then use that backup to restore your files to the iMac. The steps to restore a backup from an external drive are the same.

  • Migration from sharepoint 2010 enterprise to sharepoint 2013 standard

    Hi
    I need to do migration from SharePoint 2010 enterprise to SharePoint 2013 standard. We have only one content database and no custom deployments. I had tried database attach upgrade method. After I run Mount-SPContentDatabase PS Command. First it ran well
    for few minutes then it got stuck  for hours and finally failed . Please let me know if anyone came across this situation. How to migrate from SharePoint 2010 enterprise to SharePoint 2013 standard? Thanks in advance.

    Thanks norari,
    Yes ,following are the errors that i got during migration. 
    Event 5586(SharePoint foundation) of severity 'Error' occurred 6 more time(s) and was suppressed in the event log.
    Failure trying to synch
    web application a1c11f44-3bc3-4cce-ad2d-e1a459c46c67, ContentDB
    6681d540-313f-4ccc-a770-66608eecf3be
    string1
    System.Data.SqlClient.SqlException
    (0x80131904): Invalid object name 'TVF_EventCache_ReadPast_LEQId'. Invalid
    object name 'TVF_EventCache_Id'. at
    System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean
    breakConnection, Action`1 wrapCloseInAction) at
    System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
    stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at
    System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand
    cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler,
    TdsParserStateObject stateObj, Boolean& dataReady) at
    System.Data.SqlClient.SqlDataReader.TryConsumeMetaData() at
    System.Data.SqlClient.SqlDataReader.get_MetaData() at
    System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds,
    RunBehavior runBehavior, String resetOptionsString) at
    System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior
    cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32
    timeout, Task& task, Boolean asyncWrite, SqlDataReader ds) at
    System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior,
    RunBehavior runBehavior, Boolean returnStream, String method,
    TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean
    asyncWrite) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior
    cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at
    System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String
    method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior
    behavior) at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand
    command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean
    retryForDeadLock) at
    Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command,
    Boolean retryForDeadLock) at
    Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command) at
    Microsoft.SharePoint.SPChangeToken.GetCurrentChange(SqlSession session,
    Int64& changeNumber, DateTime& changeTime) at
    Microsoft.SharePoint.SPChangeToken..ctor(SPContentDatabase db) at
    Microsoft.Office.Server.UserProfiles.ContentDBSynchronizer.SynchContentDB() at
    Microsoft.Office.Server.Diagnostics.FirstChanceHandler.ExceptionFilter(Boolean
    fRethrowException, TryBlock tryBlock, FilterBlock filter, CatchBlock catchBlock,
    FinallyBlock finallyBlock) at
    Microsoft.Office.Server.UserProfiles.WSSProfileSyncJob.Execute()
    ClientConnectionId:a1e477c3-5e3c-4e38-818b-18504ae9b5ce Error
    Number:208,State:1,Class:16

  • Migrating From Exchange 2010

    I am in the process of migrating from Exchange 2010 to Exchange 2013.  I have all mailboxes migrated to Exchange 2013 and am ready to eliminate Exchange 2010 in its entirety, but I am unsure about public folders.  We have no public folders other
    than the default ones generated during the Exchange 2010 installation.  I can't find anything in any of the migration guides that explain what I need to do in this case.  Do I need to migrate anything, or can I just uninstall Exchange from the server
    and ignore the default public folders?

    Thanks.  We had one person using Outlook 2003 years ago, but that has since been replaced with Outlook 2010.  I was able to remove the "Calendar" folder that appeared in the Public Folder Manager (took me a while to see the "Delete"
    link) and was able to proceed.  It does not appear that I have caused any problems.

  • Migration from 2003 - 2010, OAB errors on client, and OAB virtual directory does not contain any files.

    Migration from 2003 - 2010, OAB errors on client, and OAB virtual directory does not contain any files. 

    Hi,
    Please re-create the Outlook profile to have a try. If the issue persists, we can do the further checks in Exchange server.
    Please make sure you have changed the OAB generation server to Exchange 2010 and enable Web distribution on the Exchange 2010 Client Access server:
    Move-OfflineAddressBook "Default Offline Address List" -Server <MBX2010>
    If all configurations are correct, please check whether there is any folder in the following path in Exchange sever 2010:
    a. OAB generation in Mailbox:
    \\Program Files\Microsoft\Exchange Server\V14\ExchangeOAB
    b. OAB distribution in Client Access:
    \\Program Files\Microsoft\Exchange Server\V14\ClientAccess\OAB
    Thanks,
    Winnie Liang
    TechNet Community Support

Maybe you are looking for