Lync 2013 Multitenant - Sign-in not working
Hello,
I am working on deploying the Lync 2013 Multitenant hosting pack in a staging environment for testing with the eventual goal of putting this into a production environment. So far I am working with a single front-end server routed through an F5 load balancer
using their iApp application template for Lync 2013. We are attempting to work with a very simple deployment that we scale out as additional features/capacity is needed.
The issue I'm having is during the sign-in process. I have provisioned a tenant and a user within that tenant and I am able to use the Get-CsTenant and Get-CsUser commands to view the tenant and user. I have also established the following DNS entries for
the tenant.
A record: lync.<hosting domain> - Pointed to the public IP address for the Lync application through our F5.
A record: lyncpool01.<hosting domain> - Pointed to the public IP address for the Lync application through our F5.
SRV record: _sip._tls.<tenant domain> (priority 0, weight 0, port 443) - Pointed to lync.<hosting domain>
SRV record: _sipfederationtls._tcp.<tenant domain> (priority 0, weight 0, port 5061) - Pointed to lync.<hosting domain>
When I attempt to sign in to my test user externally using the Lync 2013 desktop client, I do get a certificate warning on the client that lync.<hosting domain> (cert is lyncpool01.<hosting domain>) is attempting to handle the request, but when
I accept the cert, the client waits for about 30 seconds and then gives the error "Lync couldn't find a Lync Server for <tenant domain>. There might be an issue with the Domain Name System (DNS) configuration for your domain. Please contact your
support team.". I can't figure out where this is falling apart or what name the Lync client is attempting to reach, and enabling event logging for Lync has revealed no helpful information.
Is there any assistance you can give?
Hi,
Agree with PaulB_NZ.
As Lync 2013 Multitenant only have external and federation users, you need to deploy Edge Server in the DMZ zone to support external and federation access.
What's more, if you want to use Lync mobile clients you also need to deploy a Reverse Proxy in the DMZ zone.
More details:
https://technet.microsoft.com/en-us/library/gg398069.aspx?f=255&MSPPError=-2147217396
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support
Similar Messages
-
Lync 2013 meeting invitation customizations not working for some users
Hello Microsoft TechNet Forms,
I have a strange problem that I am totally stumped on. I made some modifications to the Lync 2013 meeting configuration to add in my company's logo, a footer and set a custom help Lync URL. Now everything seemed to work expect for myself and
one other person I tested with. If I try creating a new Lync 2013 meeting via my Outlook 2013 the normal stock Lync meeting invite appears. Yet testing with any other user everything I have changed appears as expected and I am at a total loss to why.
I have so far from troubleshooting determined it must be something with my account that is causing it but I have just not been able to determine what. As signing into a different machine yields the same result yet testing with another account that is
known to work on the exact same machine works correctly with the different account. I have tired deleting and re-crating my Lync account just in case that had something to do with it but that didn't fix the problem. I have tired repairing Office 2013 to
running windows update on Office 2013 which didn't help.
The changes I made to the meeting configuration are global scoped. I have so far not found anything online from anyone ever reporting a similar issue to this. At this point I am stuck on what I should be looking for with regards to what is stopping
the meeting invite updating for myself and the other person. Given I don't know what mechanism is involved with updating the Lync meeting invite on Outlook 2013 I am stumped. I am open to any suggestions someone might have as to what to do next or what might
be the cause of this problem.
Nicholas,Hi Nicholas,
Can you compare your account with other’s and check if your account is applied any special policy in Lync Control Panel ?
Best regards,
Eric -
Lync 2013 Mobility continues to not work
Having issues getting mobility to work.
Simple environment:
Single server Edge pool
Single server EE pool
SQL clustered backend
All Lync 2013 CU1 at this point in time.
Potentially required reading:
Deploying Mobility (Technet)
Lync Mobility Deep dive
(based on 2010, but nearly the same in 2013)
http://masteringlync.com/2011/08/13/using-fiddler-to-troubleshoot-address-book-download-issues/
http://blogs.technet.com/b/nexthop/archive/2012/11/09/understanding-lync-server-autodiscover-to-support-the-lync-windows-store-app.aspx
Windows RT app uses the same method as IOS, and is more wiresharkable/tracable, so I am using that.
Client end errors:
Windows RT app (15.0.4481.1503) - this client version cannot log in.
iOS - Can't sign in. Please check your account information and try again.
I don't have a windows phone or android, so working with the clients I have. (I understand these also do not work)
Fiddler trace of Windows RT app session:
From the W3svc logs:
2013-03-20 03:53:17 1.2.3.4 GET /Autodiscover/AutodiscoverService.svc/root/user [email protected] 4443 - 75.122.79.199
LyncImm/15.0.4481.1503+(Microsoft+Lync) 401 0 0 35
LyncImm is
NOT a user agent listed in the CSCP - google "user agent" +lyncIMM turned up nothing. Dead lead?
Lync connectivity analyzer shows it repeats the same webticket 401 over and over with:
Cookie found in autodiscover response: StatusCode: 401, ReasonPhrase: 'Unauthorized', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
X-Ms-diagnostics: 28032;source="LyncFE.company.local";reason="The web ticket is invalid.";faultcode="wsse:InvalidSecurityToken"
X-MS-WebTicketURL:
https://lyncweb.company.com/WebTicket/WebTicketService.svc
X-MS-WebTicketSupported: cwt,saml
X-MS-Server-Fqdn: LyncFE.company.local
X-Content-Type-Options: nosniff
Cache-Control: no-cache
Date: Wed, 20 Mar 2013 04:12:20 GMT
Server: Microsoft-IIS/7.5
X-Powered-By: ASP.NET
Content-Length: 1293
Content-Type: text/html
LCA: from inside, choosing Windows App - success!
LCA: from inside, choosing Lync Mobile Apps- fail:
Failed to obtain the WS-Metadata Exchange (MEX) document using GET for
https://lyncweb.company.com/Mcx/McxService.svc/mex.
The service did not require authorization.
LCA, from outside, choosing Windows App - hangs repeatedly on the HTTPS external channel. (repeating 401's on webticket service)
LCA, from outside, choosing Choosing Lync Mobile apps - failed, same as from inside #2
Here's what the LCA failure looked like:
2013-03-20 04:59:12
1.2.3.4 POST /WebTicket/WebTicketService.svc/mex - 4443 - 75.122.79.199 - 200 0
0 134
2013-03-20 04:59:12
1.2.3.4 POST /WebTicket/WebTicketService.svc/Auth - 4443 - 75.122.79.199 - 200
0 0 155
2013-03-20 04:59:12
1.2.3.4 GET /Autodiscover/AutodiscoverService.svc/root/user
[email protected] 4443 - 75.122.79.199 -
401 0 0 35
2013-03-20 04:59:13
1.2.3.4 POST /WebTicket/WebTicketService.svc/mex - 4443 - 75.122.79.199 - 200 0
0 126
2013-03-20 04:59:13
1.2.3.4 POST /WebTicket/WebTicketService.svc/Auth - 4443 - 75.122.79.199 - 200
0 0 158
2013-03-20 04:59:13
1.2.3.4 GET /Autodiscover/AutodiscoverService.svc/root/user
[email protected] 4443 - 75.122.79.199 -
401 0 0 31
2013-03-20 04:59:13
1.2.3.4 POST /WebTicket/WebTicketService.svc/mex - 4443 - 75.122.79.199 - 200 0
0 126
2013-03-20 04:59:13
1.2.3.4 POST /WebTicket/WebTicketService.svc/Auth - 4443 - 75.122.79.199 - 200
0 0 148
2013-03-20 04:59:13
1.2.3.4 GET /Autodiscover/AutodiscoverService.svc/root/user
[email protected] 4443 - 75.122.79.199 -
401 0 0 33
2013-03-20 04:59:13
1.2.3.4 POST /WebTicket/WebTicketService.svc/mex - 4443 - 75.122.79.199 - 200 0
0 121
2013-03-20 04:59:13
1.2.3.4 POST /WebTicket/WebTicketService.svc/Auth - 4443 - 75.122.79.199 - 200
0 0 155
2013-03-20 04:59:13
1.2.3.4 GET /Autodiscover/AutodiscoverService.svc/root/user
[email protected] 4443 - 75.122.79.199 -
401 0 0 31
2013-03-20 04:59:15
1.2.3.4 POST /WebTicket/WebTicketService.svc/mex - 4443 - 75.122.79.199 - 200 0
0 125
2013-03-20 04:59:15
1.2.3.4 POST /WebTicket/WebTicketService.svc/Auth - 4443 - 75.122.79.199 - 200
0 0 147
2013-03-20 04:59:15
1.2.3.4 GET /Autodiscover/AutodiscoverService.svc/root/user
[email protected] 4443 - 75.122.79.199 -
401 0 0 32
2013-03-20 04:59:15
1.2.3.4 POST /WebTicket/WebTicketService.svc/mex - 4443 - 75.122.79.199 - 200 0
0 120
2013-03-20 04:59:15
1.2.3.4 POST /WebTicket/WebTicketService.svc/Auth - 4443 - 75.122.79.199 - 200
0 0 151
Similar thread:
http://social.technet.microsoft.com/Forums/en-US/ocsmobility/thread/96c3fc3a-2f80-435a-8368-1a83dcd56e55/
http://msdn.microsoft.com/en-us/library/ff595929%28v=office.12%29.aspx
IOS attempt at sign on (version 4.3.8000.0000)
IIS log files:
2013-03-20 04:26:08
1.2.3.4 GET / sipuri=sip:[email protected] 4443 - 166.137.151.211
Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 200 0 0 1382013-03-20 04:26:08
1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 0 0 802013-03-20 04:26:08
1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 1 2148074254 1292013-03-20 04:26:08
1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 1 2148074252 882013-03-20 04:26:08
1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 1 2148074254 782013-03-20 04:26:08
1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 1 2148074252 882013-03-20 04:26:09
1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 1 2148074254 782013-03-20 04:26:09
1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 1 2148074252 84
IOS log file was too large to post in message.
Running test-cmdlets:
$passwd1 = ConvertTo-SecureString "supersecure" -AsPlainText -Force $passwd2 = ConvertTo-SecureString "notontheinternet" -AsPlainText -Force $tuc1 = New-Object Management.Automation.PSCredential("domain\user1",
$passwd1) $tuc2 = New-Object Management.Automation.PSCredential("domain\user2", $passwd2) Test-CsMcxP2PIM -TargetFqdn lyncfe.company.local -Authentication Negotiate -SenderSipAddress sip:[email protected] -SenderCredential $tuc1 -ReceiverSipAddress
sip:[email protected] -ReceiverCredential $tuc2 -v
From <http://technet.microsoft.com/en-us/library/hh690024.aspx>
Results:
Target Fqdn : lyncfe.company.com
Target Uri :
https://lyncfe.company.com:443/mcx
Result : Failure
Latency : 00:00:00
Error Message : No response received for Web-Ticket service.
Inner Exception:The HTTP request is unauthorized with client
authentication scheme 'Ntlm'. The authentication header
received from the server was 'Negotiate,NTLM'.
Inner Exception:The remote server returned an error: (401)
Unauthorized.
Diagnosis :
Inner Diagnosis:X-MS-Server-Fqdn : lyncfe.company.com
Cache-Control : private
Content-Type : text/html; charset=utf-8
Server : Microsoft-IIS/7.5
WWW-Authenticate : Negotiate,NTLM
X-Powered-By : ASP.NET
X-Content-Type-Options : nosniff
Date : Wed, 20 Mar 2013 04:39:44 GMT
Content-Length : 6639
Verbose comments on it:
Trying to get web ticket.
Web Service Url :
https://lyncfe.company.com:443/WebTicket/WebTicketService.svc
Using NTLM\Kerberos authentication.
Could not get a web ticket
CHECK:
- Web service Url is valid and the web services are functional
- If using Phone Number\PIN to authenticate, make sure they match the user uri
- If using NTLM\Kerberos authentication, make sure you provided valid
credentials
URLs and ports all look OK, all services started.
Not using phone/PIN
I provided valid creds - the virtual directories show anon/NTLM for the Webticket vdir.
Any help is welcome - really want this issue put to bed!I know this is an old thread, but I was struggling with the same error for mobility, and I hope this may help others in the same situation.
On my scenario the issue was caused because the customer didn't use any reverse-proxy solution, instead the FE external website was directly published using a FortiGate box.
Given that scenario, there were 2 different certs installed on the FE server, 1 (internal RootCA) certificate was applied to the internal website, and another one issued by Godaddy was assigned to the external website manually from IIS console.
---I know this is far from a supported solution, but I was able to get it working after some investigation---
To solve the issue I use this article:
http://technet.microsoft.com/en-us/library/jj205253.aspx it explains how to check and assign the certificates for oAuth and I used these cmdlets to specify the Godaddy cert to the "WebServiceExternal" & "OAuthTokenIssuer" websites.
After that the mobility access for internal and external users started to work as expected, I've validated it with "Lync Connectivity Analyzer" and with different mobile clients on Android, IOS and Windows Store.
Hope this information may be useful.
Performance, Security & Design -
Lync 2013 Web App Sharing not working.
We are having a problem with Lync Web App 2013. Our external customers can open the meeting link and join the meeting without a problem. Once they are in the meeting an internal user begins the presentation by sharing his screen. The Lync
Web App just says "Loading..." for the external customer. The internal presenter sees this external customer continually change from "in collaboration session" to "not in collaboration session". The external customer
is never actually shown the screen share.
Other notes:
-->We tried this from an external wireless hotspot and it worked fine, thus, it seems something in this customer's company firewall that is blocking it.
-->We also tried sharing a powerpoint (we have a functional office web apps server), which produced the same results.
-->When we used the Lync 2010 Web App (before we upgraded to 2013), everything seemed to work fine, thus I am concluding that the 2013 Lync Web App (since it has more capabilities) is somehow trying to use more ports or something.
-->Internally, the Lync Web app works fine.
So, I assume something in the customer's company's firewall is blocking some access to Lync 2013 Web App. My question is: what needs to be enabled both on-premise and at the customer's side to access Lync 2013 Web App screen sharing and if the
company (for security reasons) doesn't want to open extra ports, is there some work around to force Lync Web App to use port 443 for screen sharing.
Thanks,
AdamThe ports 1024-65535 * are used for application sharing.
You can configure the port ranges for Lync clients.
http://technet.microsoft.com/en-us/library/jj204760.aspx
You can’t use 443 as port 443 is used for HTTPs.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Link to User's MySite on Lync 2013 Contact Card does not work
Hello,
we're running a sharepoint 2010 environment with a configured user profile service application and a mysite host. we're also running lync 2010 clients but are planning to upgrade to lync 2013. the it guys (including me) have already installed lync 2013 client.
the lync server is also already on 2013.
with the old 2010 lync client, it was possible to click on a name from a lync contact card and this directed to the users mysite, which was great. to archieve this, we updates the wwwHomepage attribute in AD with the corresponding link for each user to the
mysite.
now with lync 2013 it is no longer possible.
i couldn't find anything about this topic ...
any help would be highly appreciated
kind regards
MarcoI tested it in my lab.
The same result with your.
It is by design.
Lisa Zheng
TechNet Community Support -
using the lync client connectivity tester on a pc on the same lan as my mobile client everything is green and it says its ready for use.
using my android galaxy s5 client on wifi on the same lan i get a screen with waiting to sign in spinning and an error at the top "we cant connect to the server check your network connection and server address, and try again."
i have uploaded the full client log files
here: client log file
some errors that stand out from this log file are:
1. ERROR HttpEngine: Certificate check fails: java.security.cert.CertPathValidatorException: Trust anchor for certification path not found.
2. <h2>401 - Unauthorized: Access is denied due to invalid credentials.</h2>
<h3>You do not have permission to view this directory or page using the credentials that you supplied.</h3>
i am using the correct creds, same creds i used on the analyzer tool.
in the analyzer tool i did have to fill in the username field because my sip domain is different then my users UPN. which from what ive read its required to use the username field.
i also filled in the username field in the mobile app with domain\username
3. ERROR LYNC: ERROR TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/platform/networkapis/privateandroid/CHttpConnection.cpp/295:CHttpConnection exception: java.lang.NullPointerException
Jan 14, 2015 8:40:49 AM INFO LYNC: INFO TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/transport/requestprocessor/private/CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x22020001
Jan 14, 2015 8:40:49 AM INFO LYNC: INFO TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/transport/requestprocessor/private/CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The retry
counter is: 0
4. Jan 14, 2015 8:40:50 AM ERROR LYNC: ERROR TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/transport/authenticationresolver/private/CAuthenticationResolver.cpp/431:Failing the original request as we weren't able to get the token
this is the same type of error i was getting in the lync connectivity analyzer until i filled in the username field. but its filled in, in my client.
again you can see the full log file is `HERE
thank you in advance for any help. im trying to get internal working before i try external.Eric,
I am trying to configure a reverseproxy on my netscaler which is in a 2 arm mode(dmz/internal) but I keep getting an error when configuring the monitor.
i used this guide to configure it
http://www.lynced.com.au/2014/04/configure-citrix-netscaler-vpx-as.html
but continue to get this error in the netscaler monitor "Failure - TCP connection successful, but application timed out"
so the virtual server is never up, thinking about just changing it to tcp as a monitor so it stays up and i can at lesat get the vip up.
Also your link to the diagram shows it going to the reverse proxy but the one im using has it going directly to the front end servers.
http://www.lync-solutions.com/Documents/Lync_2013_protocol_poster_v6_7.pdf
I'm guessing Microsoft's is the correct one but wonder why the config differential?
I see that your diagram says "mobility url", what is the mobility url? i though that was the lyncdiscoverinternal.internal.com
current setup is
2 fe servers on internal
1 edge server on dmz
1 almost done reverse proxy netscaler load balancer.
also this ms link i used to configure dns entries, along with the pdf linked above.
http://technet.microsoft.com/en-us/library/jj945644.aspx
i currently have these external dns entries and they all point to the edge server on the dmz.
dialin .external.com
lync .external.com
lyncweb .external.com
lyncdiscover.external.com
meet .external.com
sip .external.com
webconf .external.com
av .external.com
_autodiscover._tcp.external.com.
the internal dns links point to 1 of the front end servers
1. lyncdiscoverinternal.internal.com
2. lyncdiscover.internal.com
3. _sipinternaltls._tcp.internal.com
4. _sipinternal._tcp.internal.com
5. sipinternal.internal.com
6. sip.internal.com
thanks again for your help. -
Lync 2013 EDGE replication is not working
Hi,
I need help, I think the problem accrued when I installed updates.
From Lync FE server I can access edge:4443/replicationwebservice, certificate is trusted.
I added registry keys to: HKLM\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL,
but it not made any sense.
Lync logging tools detected:
TL_WARN(TF_COMPONENT) [1]32CC.3050::01/31/2014-07:27:31.194.00000669 (XDS_File_Transfer_Agent,FileTransferTask.CopyFilesToReplicaUsingWcf:filetransfertask.cs(631))
(00000000030B7F44)Failed to copy files from temp directory. Exception: [System.ServiceModel.Security.MessageSecurityException: The HTTP request was forbidden with client authentication scheme
'Anonymous'. ---> System.Net.WebException: The remote server returned an error: (403)
Forbidden.
TL_WARN(TF_COMPONENT) [1]32CC.3050::01/31/2014-07:27:31.194.0000066a (XDS_File_Transfer_Agent,FileTransferTask.IsUnhandledException:filetransfertask.cs(853))
(00000000030B7F44)Exception occured. Task execution will be retried. Exception: [System.ServiceModel.Security.MessageSecurityException: The HTTP request was forbidden with client authentication scheme
'Anonymous'. ---> System.Net.WebException: The remote server returned an error: (403)
Forbidden. at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
--- End of inner exception stack trace ---Server stack trace:
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateAuthentication(HttpWebRequest request, HttpWebResponse response, WebException responseException, HttpChannelFactory`1 factory)
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory, WebException responseException, ChannelBinding channelBinding)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Rtc.Xds.Replication.Common.IReplicationWebService.UploadFiles(String senderFqdn, String path, ReplicaFileCollection files)
at Microsoft.Rtc.Xds.Replication.FileTransfer.FileTransferTask.CopyFilesToReplicaUsingWcf(String fromDir, String toDir)]I regenerated all local SSL, I configured CRL, because I found warning in EDGE server without success...
And why I see different product version? This version from last replication?
UpToDate : True
ReplicaFqdn : lync1.domain.local
LastStatusReport : 2014.02.25 18:00:29
LastUpdateCreation : 2014.02.25 18:00:27
ProductVersion : 5.0.8308.556
UpToDate : False
ReplicaFqdn : lync-edge1.domain.local
LastStatusReport : 2013.11.14 17:00:48
LastUpdateCreation : 2014.02.26 08:01:37
ProductVersion : 5.0.8308.0
UpToDate : True
ReplicaFqdn : lync-chat1.domain.local
LastStatusReport : 2014.02.25 18:00:30
LastUpdateCreation : 2014.02.25 18:00:27
ProductVersion : 5.0.8308.556 -
Lync 2013 Multitenant hosting meeting URL
I have a Lync 2013 multitenant hosting environment. Lync Meeting Add-in for Microsoft Outlook 2013 closes itself a split second after it opens, no
error, no pop-up, and no message to say what’s going on. Yet within the Lync client, I can still start an ad-hoc meeting (“Meet Now”), But the
Meeting Entry Info URL looks like this conf:sip:bongani@......... Instead of a norma https link. I also have the event below on the Lync server event
viewer. but the meeting URL are configured in the format https://meet.hosterdomain.co.za/tenantdomain.co.za
Event ID 32148 – LS User Service
A user tried to create a conference with no Simple URL of type Meet available. This configuration will not work for scheduled conferences. Ad-hoc
conferences may be created but join functionality will be impaired.
And if I do a Set-CsSimpleUrlConfiguration -UseBackEndDatabase $false as recommended. I get the following when I run enable-cscomputer.
WARNING: No patterns found. Skipping rewrite rules creation for Meet simple URLs.
WARNING: No patterns found. Skipping rewrite rule creation for dial-in conferencing.
WARNING: No patterns found. Skipping rewrite rule creation for Web Scheduler.
WARNING: No patterns found. Skipping rewrite rule creation for dial-in conferencing.
WARNING: No patterns found. Skipping rewrite rule creation for Web Scheduler.
WARNING: "Enable-CsComputer" processing has completed with warnings. "5" warnings were recorded during this run.
WARNING: Detailed results can be found at "C:\Users\xxx\AppData\Local\Temp\Enable-CsComputer-26374787-f6b5-4a07-b8f4-7bd819d3ffc3.html".
I tried following http://www.lyncexch.co.uk/lync-2013-hosting-pack-tenant-meet-dialin-urls/ but the URL doesnt change.
Not sure if all these are related or what needs to be corrected please assist.For Event ID 32148 – LS User Service, you can refer below links
http://www.lyncexch.co.uk/lync-2013-hosting-pack-tenant-meet-dialin-urls/
http://www.lyncexch.co.uk/2014/02/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
csrAttachmentUploadDiv partattachment is not rendered SP 2013(Attach file in not working for all the list forms)?
Ravi
function ShowPartAttachment() {
ULSopi:
if (document.getElementById("part1") == null || typeof document.getElementById("part1") == "undefined") {
alert(Strings.STS.L_FormMissingPart1_Text);
return;
(document.getElementById("part1")).style.display = "none";
(document.getElementById("partAttachment")).style.display = "block"; //problem hereAm also facing the similar problem....any iputs are highly appriciated.
Issue..
1) Defined the attachment type in IMG.
2) Added the attachment type "SFREEATTM" by selecting other attributes---> Attachment Types.
3) Attached the excel file in the design.
See the screen shot below:
The Issue is when testing through tcode nwbc in the inbox the attachment tab is not visible after selecting the particular form.
Please see the screen shot below:
Did i miss any Configuration?? Please suggest...
Regards,
Naveen -
My Macbook Pro (bought in 2013) function keys are not working
My Macbook Pro (bought in 2013) function keys are not working. The function keys ie the volume and brightness are not working at all both with one single tap and with the function button. I have checked the settings for the keyboard but nothing seems to stand out that is making the keys not work?
Please can you help?
Thanks
KatSome might suggest resetting the SMC, but I don't really think that will solve the problem. You can try, though.
I would suggest, since you're still under warranty, taking your machine to your local Apple Store/AASP and letting them fix the problem. It could be any sort of hardware problem. Only the Apple techs have the tools to properly diagnose and repair the machine.
Clinton -
Need help when I sign in not working
''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/978554 /questions/978554]''
I did try to follow the update things but could not get that. So how can I get my sign in working?
XXX
please help me get my sign in working
<sub>edit: removed personal information for your protection. (philipp)</sub>when I sign in not working. I did try to folow the update but could not get that.
XXX
please help me get my sign in working
<sub>edit: removed personal information for your protection. (philipp)</sub> -
Saving "Sign in" not working in Firefox but okay using MS Explorer
Do you mean names and passwords in the Password Manager or do you mean that you are no longer logged on to (remembered by) websites after closing and restarting Firefox?<br />
There is a difference between remembering the name and password in the Password Manager and a "remember me" check box on a web page.<br />
The latter usually involves the creation of a special "remember me" cookie that is stored on your computer and that is send to the server.<br />
If that "remember me" cookie is removed or gets corrupted or is not send to the server then the server won't remember you and you need to sign in once again.<br />
See:
* http://kb.mozillazine.org/Cookies
*http://kb.mozillazine.org/Password_Manager
*http://kb.mozillazine.org/User_name_and_password_not_remembered
*https://support.mozilla.org/kb/make-firefox-remember-usernames-and-passwords -
In post http://social.technet.microsoft.com/Forums/lync/en-US/8a22eed7-cc63-4f9e-b422-3c5a57fb32b0/lync-2013-multitenant-pack-and-lync-2010?forum=lyncdeploy , which was already answered, the answer is no, you cannot migrate from 2010 on-prem. to lync 2013
hosted pack.
Trying to get my head around #1 -why, and #2 -what other alternatives are available.
Lisa answered that there can only be 1 CMS per forest. Is it one CMS per forest, or
one CMS per front end pool in a forest? Meaning you can have different CMS pools. If that were true, we could migrate users to a different front end pool in a coexistence scenario between 2010 on-prem to 2013 hosted pack.
Has anyone done this?
This is tough. I guess a cutover then from 2010 to 2013 multitenant hosted pack would be what?
1. Uninstall 2010, decommission users, decom environment/servers.
2. Fresh install in same AD environment of 2013 hosted pack.
That's tough for our users to make such a transition and have potentially days of downtime.
Is there no other way to do this?
JoshIt is one CMS per forest.
There is no official guide to move from Microsoft Lync Server to Microsoft Lync Server Multitenant Hosting Pack.
This topic has been discussed several times before:
http://social.technet.microsoft.com/Forums/lync/en-US/9d438b55-ec53-478a-9247-6d355abedb78/started-installing-lync-2010-enterprise-discovered-multitenant-hosting-pack-do-i-need-to-uninstall?forum=ocsplanningdeployment
http://social.technet.microsoft.com/Forums/lync/en-US/ad0b77ca-d47e-457b-8f77-33f84409a119/schema-update-lync-hosting-pack?forum=ocsplanningdeployment
Lisa Zheng
TechNet Community Support -
Exchange 2013 CU2 OWA Redirection not working
Hi,
I installed Exchange 2013 RTM in existing environment with Exchange 2010 Sp3 in our test environment. After installing Exchange 2013 RTM I checked when I access OWA using Internal URl it redirected to Exchange 2010 CAS server's Internal URL and I was
able to access Exchange 2010 mailbox.
I upgraded to CU2 and now Exchange 2013 internal URl not re-directing it to Exchange 2010 mailbox anymore. I checked all the settings on virtual directories and made sure that FBA authentication is selected. It is a test environment and I just wanted
to test the re-direction in co-existence environment using Internal URL. It should work out of the box but not sure what happened. There was no issue in CU2 instllation.
Exchange 2013 CAS and mailbox roles are on separate servers. Same with Exchange 2010. There is no certificate 3rd party certificate install on CAS servers since it is a test environment.
Not sure what else can I check.
I appreciate if any help I can get.
Thanks,
Regards
Raman
RamanI have been seeing issue where 2013 OWA was not re-directing to Exchange 2013, as mentioned on top of this thread. After spending days over it.
Finally it resolved for me after doing the following: -
Go to CAS 2010 IIS
OWA directory -> Authentication -> Windows Authentication -> Add provider
Negotiate and NTLM.
Although, now when I click on "Options" once OWA is redirected to 2010. ECP does
not work. It just open up ECP page but no link works not even sign out. I had to click back on the browser's back button go get back to main OWA mail page.
OWA and ECP directory settings are same. I have checked several times.
Thanks,
Raman -
Lync 2013 client ews has not fully initialized
Hello
I have Lync 2010 server and Lync 2013 client. whenever Lync 2013 client logs in from outside(external) I get a exchange authentication pop up. and when I checked the status of lync - it says ews is not fully initialized. lync 2013 client works fine
from inside. If I use lync 2010 client from outside than it works fine, no pop up and ews status is ok. so I know that my TMG rules are accurate but something wrong with lync 2013 client itself. I have upgraded the client to the latest update.
Also I have tried various combinateion of this below registry fix without any success.
also Microsoft remote connectivity analyzer test is clean. no errors.
http://uclobby.com/2014/01/03/lync-client-2013-ews-has-not-fully-initialized/
any thoughts?
thanksHi
Can you try clearing the user local cache SIP folder who logs in externally and see the results
User\App Data\Microsoft\Office 15\lync\SIP
Is your SIP domain different from your domain name
If it is so you can try by adding the SMTP Domain as trusted using the following cmdlet:
reg add HKLM\Software\Policies\Microsoft\Office\15.0\Lync /v TrustModelData /t REG_EXPAND_SZ /d <SMTP Domain> /f
If it is for multiple users you can also try the below article
http://technet.microsoft.com/en-us/library/gg398920.aspx
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)
Maybe you are looking for
-
How can you find out what number comment you are on within the comments list?
Hi everyone, I have looked around but I cannot seem to find an answer to what seems a very simple request. I have a PDF with over a hundred comments on it and I am making (slow) progress through the comments list. I would like to estimate how long th
-
Overlapping icons in Applications Folder Dock icon
I recently upgraded to a MBP Retina running 10.8.3 Mountain Lion. Deciding to re-install apps and cleanup old unused stuff, I didn't use the Migration Assistant. I opened Finder and dragged the Applications folder to the Dock. When I did so, the pre
-
How to pass refcursor as input parameter to a procedure in a package
Hi there Please can anybody explain me with an small example for passing a procedure output(output should be a refcursor) and pass that refcursor values into a procedure in a package as input parameter and this value i want to use as join condition i
-
Logic Pro 9 - Final Cut Studio 2?
Some advice please? I am about to buy a MBP 15" 7200. I already own FCS2 and would like to get Logic Pro. I understand FCS2 and Pro9 are incompatible. However - is it possible to JUST install FCP, Color, Motion & DVD Studio ....... so that Logic Pro
-
Km4m-v issues. Won't install XP or boot into it.
I have KM4M-v with Sempron 2200+, 40gb hdd, 512mb ram. Problem is, since installing the board the pc will not boot into xp. t gets to welcome screen then shuts down. It will go into and stay in safe mode hapilly, but won't boot into xp normall