Lync 2013 not working externally
Hi,
Recently I have installed Lync 2013 in my organization and everything is working fine internally but when I tried from outside nothing is working. Please assist me in order to sort out this issue as I'm facing
this issue since last so many days and I tried so many things from my end but it didn't work.
Below is configuration on my edge.
Internal Interface--
192.215.x.x
Mask: 255.255.255.0
External Interface:
Public IP: 62.215.x.x
Mask: 255.255.255.x
Default: x.x.x.x
DNS: x.x.x.x
I have created the edge pool by using a option
use a single FQDN & IP Address, I'm using singe host name for access edge service, web conferencing & A/V edge server i.e. Pool1.domain.com.
Below is external setting for edge pool
Access Edge Service
FQDN: pool1.xyz.com
IP Address: 62.215.x.x
Port: 5061
Protocol: TLS
Web Conferencing edge service
FQDN: pool1.xyz.com
IP Address: 62.215.x.x
Port: 444
Protocol: TLS
AV Edge Service
FQDN: pool1.xyz.com
IP Address: 62.215.x.x
Port: 443
Protocol: TLS
I'm using same External IP for all three services.
Please let me know if I did anything wrong and assist me to resolve this issue as early as possible.
Regards,
Hakim. B
Hakim.B Sr.System Administrator
Hi,
Thanks for update,
I have enable the windows event logging and getting below error when I checked with manual setting in lync client 2013.
The description for Event ID 4 from source Lync cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Lync
pool1.domain .com
Below error when I checked with Automatic setting in lync 2013 client.
The description for Event ID 3 from source Lync cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Lync
sipexternal.kcs.com.kw
Regards,
Hakim. B
Hakim.B Sr.System Administrator
Similar Messages
-
IISARR URLS for Lync 2013 not working externally
Hello All,
Currently facing issue of opening lyncdiscover.domain.com from external.
I have created the server farm uing IISARR for Lync2013 & added 5 rules under the server farm as shown below:
meet.domain.com
dialin.domain.com
lyncdiscover.domain.com
owebapp.domain.com
When I tried browse all the above URL's none of the URLs are opening & showing below errors as attached screen shot:
Also when I tried test by using Lync 2013 Connectivity Analyzer showing below errors
SIP Uri: [email protected]
Logging test parameters:
User Name:
Discovery Type: Automatic Discovery
Network access: NetworkAccessInternal
Selected client: ApplicationLMX
Starting Lync server autodiscovery
Please wait; this test may take several minutes to complete...
Starting automatic discovery for secure (HTTPS) internal channel
lyncdiscoverinternal.domain.com can't be resolved by the DNS server. Skipping internal discovery.
For more information on DNS requirements for automatic discovery, please refer to http://go.microsoft.com/fwlink/?LinkId=278998
Starting automatic discovery for secure (HTTPS) external channel
Sending HTTP request to https://lyncdiscover.domain.com/[email protected]
Cookie found in autodiscover response: StatusCode: 500, ReasonPhrase: 'URL Rewrite Module Error.', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
Cache-Control: private
Date: Mon, 08 Sep 2014 11:51:26 GMT
Server: Microsoft-IIS/8.5
Content-Length: 5694
Content-Type: text/html; charset=utf-8
Autodiscover: SendRequest(): the URL https://lyncdiscover.domain.com/[email protected] couldn't be connected. Complete HTTP headers:\r\n Cache-Control: private
Date: Mon, 08 Sep 2014 11:51:26 GMT
Server: Microsoft-IIS/8.5
Couldn't connect to URL https://lyncdiscover.domain.com/[email protected]
Reason: Internal server error (HTTP status code 500)
System.Exception: Exception of type 'System.Exception' was thrown.
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.TerminateAD(String mesg)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for secured external channel against https://lyncdiscover.domain.com/
Starting automatic discovery for unsecure (HTTP) external channel
Sending HTTP request to http://lyncdiscover.domain.com/[email protected]
Cookie found in autodiscover response: StatusCode: 500, ReasonPhrase: 'URL Rewrite Module Error.', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
Cache-Control: private
Date: Mon, 08 Sep 2014 11:51:44 GMT
Server: Microsoft-IIS/8.5
Content-Length: 5765
Content-Type: text/html; charset=utf-8
Autodiscover: SendRequest(): the URL http://lyncdiscover.domain.com/[email protected] couldn't be connected. Complete HTTP headers:\r\n Cache-Control: private
Date: Mon, 08 Sep 2014 11:51:44 GMT
Server: Microsoft-IIS/8.5
Couldn't connect to URL http://lyncdiscover.domain.com/[email protected]
Reason: Internal server error (HTTP status code 500)
System.Exception: Exception of type 'System.Exception' was thrown.
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.TerminateAD(String mesg)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for unsecured external channel against http://lyncdiscover.domain.com/
None, AutoInternalDNSFail, AutoInternalSecureD, AutoInternalUnsecureD, AutoExternalSecureD, AutoExternalUnsecureD, ManualDNSFail, ManualSecureD, ManualUnsecureD, AuthBrokerInternalLMXCheckGET, AuthBrokerInternalLMXCheckPOST, AuthBrokerExternalLMXCheckGET, AuthBrokerExternalLMXCheckPOST,
MobilityMCXInternalLMXCheckGET, MobilityMCXInternalLMXCheckPOST, MobilityMCXExternalLMXCheckGET, MobilityMCXExternalLMXCheckPOST, LMXSIPServerInternalDNS, LMXSIPServerExternalDNS, MobilityUCWAInternalCheckPOST, MobilityUCWAExternalCheckPOST
Automatic discovery of the Lync server failed. Please verify the server requirements at http://go.microsoft.com/fwlink/?LinkId=278998
Microsoft Lync Connectivity Analyzer cannot analyze deployment readiness until a discovery test has completed successfully.
=============================================================================
NOTE : For my current Set Up for Lync 2013 please refer this link & kindly ignore the SQL archiving & monitoring issue for database mismatch version as it is resolved:
http://social.technet.microsoft.com/Forums/lync/en-US/032a8ef2-636d-40ae-a4f1-951e9a39999f/lync-2013-archiving-and-monitoring-sql-database-version-mismatch-issues?forum=lyncdeploy
Any help really appreciated
Regards
Anand S
Thanks & Regards Anand Sunka MCSA+CCNA+MCTSHi,
Please make sure there is no typos in the URL rewrite rule.
You can configure IIS ARR to display more information with the error with the following path:
Open IIS Manager –> Sites –> Default Web Site –> Error Pages –> Edit Feature Settings.
Select Detailed error
Then you can access simple URL again to check the full error message.
More details:
http://unifiedme.co.uk/2014/04/iis-arr-500-internal-server-error-get-meaning-full-info/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Content enrichment service for SP 2013 not working
Content enrichment service for SP 2013 not working
Not able to debug content enrichment service.. Can you please specify the steps for debugging the content enrichment service
Any help will be greatly appreciated.
Regards
BKPA
BKPAHi ,
Please see the following articles, run and debug service with breakpoints using F5 from VS, then register the custom content enrichment service with DebugMode and long Timeout to SharePoint, then start a full crawl to call the web service.
http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2014/04/08/how-to-use-the-sharepoint-2013-content-enrichment-web-service.aspx
http://www.jeanpaulva.com/index.php/2014/05/21/content-enrichment-web-service/
http://msdn.microsoft.com/en-us/library/office/jj163968(v=office.15).aspx#content_enrichment_configuration
http://www.blendmaster.net/blog/2012/09/using-content-enrichment-web-service-callout-in-sharepoint-2013-preview/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support -
Lync 2013 mobility and external access not working
Hi all.
I installed and configured Lync Server 2013 Front End and Lync Server 2013 Edge on Windows Server 2012 R2.
Internal lync clients (not mobile) can successfully connect to server and everything works fine for them. External users can connect only with manual configuration of address of external lync server in lync client, autodiscovery doesn't work.
I also installed and configured IIS ARR Reverse Proxy on Windows Server 2012 R2 using this article -
http://blogs.technet.com/b/nexthop/archive/2013/02/19/using-iis-arr-as-a-reverse-proxy-for-lync-server-2013.aspx. But it doesn't work too. When I try to connect I get 'Unable to connect to the server. Check your network connection or the server address and
try again'.
I configured dns records in the external dns zone.
For Edge:
sip.extdomain.ru – IP1
lyncwebconf.extdomain.ru – IP2
lyncav.extdomain.ru – IP3
For Reverse Proxy:
lyncdialin.extdomain.ru - IP4
lyncmeet.extdomain.ru - IP4
lyncextweb.extdomain.ru - IP4
lyncdiscover.extdomain.ru - IP4
I issued all needed certificates by the internal CA and added following alternative names.
For FE certificate:
sip.cherry.loc
lync.cherry.loc
dialin.cherry.loc
meet.cherry.loc
admin.cherry.loc
lyncdiscoverinternal.cherry.loc
lyncdiscover.cherry.loc
lyncdialin.extdomain.ru
lyncmeet.extdomain.ru
lyncextweb.extdomain.ru
lyncdiscover.extdomain.ru
For Edge external and Reverse Proxy:
lyncav.extdomain.ru
sip.extdomain.ru
lyncwebconf.extdomain.ru
lyncdialin.extdomain.ru
lyncmeet.extdomain.ru
lyncextweb.extdomain.ru
lyncdiscover.extdomain.ru
cherry.loc
The root certificate of internal CA installed on all servers and client devices.
Using Wireshark I see that Reverse Proxy communicating with FE on port 4443.
Here is an excerpt from mobile client log.
GET https://lyncdiscover.extdomain.ru/?sipuri=sip:[email protected]
Request Id: 0x6f54648
HttpHeader:Cache-Control no-cache
HttpHeader:Content-Length 1006
HttpHeader:Content-Type application/vnd.microsoft.rtc.autodiscover+xml; v=1
HttpHeader:Date Mon, 22 Sep 2014 11:17:45 GMT
HttpHeader:Expires -1
HttpHeader:Pragma no-cache
HttpHeader:Server Microsoft-IIS/8.5
HttpHeader:StatusCode 200
HttpHeader:X-AspNet-Version 4.0.30319
HttpHeader:X-Content-Type-Options nosniff
HttpHeader:X-MS-Server-Fqdn lync.cherry.loc
HttpHeader:X-Powered-By ASP.NET, ARR/2.5
Ôªø<?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-
instance" AccessLocation="External"><Root><Link token="Domain" href="https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=extdomain.ru" /><Link token="User" href="https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru"
/><Link token="Self" href="https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root?originalDomain=extdomain.ru" /><Link token="OAuth"
href="https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=extdomain.ru" /><Link token="External/XFrame" href="https://lync.cherry.loc/Autodiscover/XFrame/XFrame.html" /><Link
token="Internal/XFrame" href="https://lync.cherry.loc/Autodiscover/XFrame/XFrame.html"
/><Link token="XFrame" href="https://lync.cherry.loc/Autodiscover/XFrame/XFrame.html" /></Root></AutodiscoverResponse>
</ReceivedResponse>
2014-09-22 15:17:53.041 Lync[299:715a000] INFO TRANSPORT CUcwaAutoDiscoveryResponse.cpp/119:location value is external
2014-09-22 15:17:53.042 Lync[299:715a000] INFO TRANSPORT CUcwaAutoDiscoveryResponse.cpp/195:User url is
https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru
2014-09-22 15:17:53.042 Lync[299:715a000] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x6f54648)
2014-09-22 15:17:53.042 Lync[299:3c2a218c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2014-09-22 15:17:53.043 Lync[299:3c2a218c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/290:Received a root response
2014-09-22 15:17:53.043 Lync[299:3c2a218c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation completed with
url = https://lyncdiscover.extdomain.ru/?sipuri=sip:[email protected], userUrl = https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru, status = S_OK (S0-0-0)
2014-09-22 15:17:53.043 Lync[299:3c2a218c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. GET-UnAuthenticatedGet(0x6f54648): S_OK (S0-0-0) (Success); Done with req.; Stopping resend timer
2014-09-22 15:17:53.044 Lync[299:3c2a218c] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(1) returning: credType (1) signInName ([email protected]) domain (cherry) username (user) password.empty() (0) certificate.isValid() (0)
privateKey.empty() (1) compatibleServiceIds(1)
2014-09-22 15:17:53.044 Lync[299:3c2a218c] INFO TRANSPORT CMetaDataManager.cpp/403:Received a request to get the meta data of type 0 for url
https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru
2014-09-22 15:17:53.044 Lync[299:3c2a218c] INFO TRANSPORT CMetaDataManager.cpp/458:Sending Unauthenticated get to get the web-ticket url
2014-09-22 15:17:53.044 Lync[299:3c2a218c] INFO TRANSPORT CTransportThread.cpp/135:Added Request() to Request Processor queue
2014-09-22 15:17:53.045 Lync[299:3c2a218c] INFO TRANSPORT CAuthenticationResolver.cpp/109:Waiting on Meta Data from https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru
2014-09-22 15:17:53.045 Lync[299:659a000] INFO TRANSPORT CTransportThread.cpp/347:Sent Request() to Request Processor
2014-09-22 15:17:53.045 Lync[299:3c2a218c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. GET-AuthenticatedUserGetRequest(0x6e83da8)
2014-09-22 15:17:53.045 Lync[299:659a000] WARNING TRANSPORT CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning NULL credential
for serviceId (4) type (1)!
2014-09-22 15:17:53.046 Lync[299:3c2a218c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1263:Submitting Authenticated AutoDiscovery request to
https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru
2014-09-22 15:17:53.046 Lync[299:659a000] INFO TRANSPORT TransportUtilityFunctions.cpp/689:<SentRequest>
GET https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru
Request Id: 0x133b6a8
HttpHeader:Accept
</SentRequest>
2014-09-22 15:17:53.046 Lync[299:659a000] INFO UTILITIES CHttpStreamPool.cpp/399:Allocating stream 0x6e73850 for url - https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user with persistent id as 16
2014-09-22 15:17:53.047 Lync[299:659a000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/435:CHttpProxyHelper::discoverProxy : No proxy found for url
https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru. Sending over direct connection.
2014-09-22 15:17:53.050 Lync[299:659a000] ERROR TRANSPORT CHttpConnection.cpp/1029:Request Type = 0x%u0x6e743a0 Error domain = kCFErrorDomainCFNetwork code = 0x2 ErrorDescription = The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.) ErrorFailureReason
= ErrorRecoverySuggestion =
2014-09-22 15:17:53.050 Lync[299:659a000] ERROR UTILITIES CHttpConnection.cpp/958:GetAddrInfo returned error 0x8
2014-09-22 15:17:53.050 Lync[299:659a000] INFO UTILITIES CHttpStreamPool.cpp/467:Releasing stream 0x6e73850.
2014-09-22 15:17:53.050 Lync[299:659a000] INFO UTILITIES CHttpStreamPool.cpp/599:Releasing stream 0x6e73850.
2014-09-22 15:17:53.051 Lync[299:659a000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request() with status = 0x22020001
2014-09-22 15:17:53.051 Lync[299:659a000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request resulted in E_ConnectionError (E2-2-1). The retry counter is: 0
2014-09-22 15:17:53.051 Lync[299:659a000] WARNING TRANSPORT CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning NULL credential
for serviceId (4) type (1)!
2014-09-22 15:17:53.052 Lync[299:659a000] INFO TRANSPORT TransportUtilityFunctions.cpp/689:<SentRequest>
GET https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru
Request Id: 0x133b6a8
HttpHeader:Accept
</SentRequest>
2014-09-22 15:17:53.052 Lync[299:659a000] INFO UTILITIES CHttpStreamPool.cpp/399:Allocating stream 0x14102a0 for url - https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user with persistent id as 16
2014-09-22 15:17:53.053 Lync[299:659a000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/435:CHttpProxyHelper::discoverProxy : No proxy found for url
https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru. Sending over direct connection.
2014-09-22 15:17:53.056 Lync[299:659a000] ERROR TRANSPORT CHttpConnection.cpp/1029:Request Type = 0x%u0x14080f0 Error domain = kCFErrorDomainCFNetwork code =
0x2 ErrorDescription = The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.) ErrorFailureReason = ErrorRecoverySuggestion =
2014-09-22 15:17:53.056 Lync[299:659a000] ERROR UTILITIES CHttpConnection.cpp/958:GetAddrInfo returned error 0x8
2014-09-22 15:17:53.056 Lync[299:659a000] INFO UTILITIES CHttpStreamPool.cpp/467:Releasing stream 0x14102a0.
2014-09-22 15:17:53.056 Lync[299:659a000] INFO UTILITIES CHttpStreamPool.cpp/599:Releasing stream 0x14102a0.
2014-09-22 15:17:53.057 Lync[299:659a000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request() with status = 0x22020001
2014-09-22 15:17:53.057 Lync[299:659a000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request resulted in E_ConnectionError (E2-2-1). The retry counter is: 1
2014-09-22 15:17:53.057 Lync[299:659a000] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x133b6a8)
2014-09-22 15:17:53.058 Lync[299:3c2a218c] INFO TRANSPORT CMetaDataManager.cpp/572:Received response for meta data request of type 60 with status 570556417
2014-09-22 15:17:53.058 Lync[299:3c2a218c] ERROR TRANSPORT CMetaDataManager.cpp/588:Unable to get a response to an unauthenticated get to url
https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru
2014-09-22 15:17:53.059 Lync[299:3c2a218c] INFO TRANSPORT CAuthenticationResolver.cpp/208:MetaData retrieval for url https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru completed with status 570556417
2014-09-22 15:17:53.059 Lync[299:3c2a218c] INFO TRANSPORT CAuthenticationResolver.cpp/238:Deleting 1 pended Meta data requests for url
https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru
2014-09-22 15:17:53.059 Lync[299:3c2a218c] ERROR TRANSPORT CAuthenticationResolver.cpp/334:Unable to get the meta data for server url
https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru
2014-09-22 15:17:53.059 Lync[299:3c2a218c] INFO TRANSPORT CAuthenticationResolver.cpp/337:Failing request to the request manager
2014-09-22 15:17:53.060 Lync[299:3c2a218c] INFO TRANSPORT CRequestManager.cpp/284:Failing secure request UcwaAutoDiscoveryRequest with status E_ConnectionError (E2-2-1)
2014-09-22 15:17:53.060 Lync[299:3c2a218c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2014-09-22 15:17:53.060 Lync[299:3c2a218c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1358:Received autodiscovery response with status E_ConnectionError (E2-2-1)
2014-09-22 15:17:53.060 Lync[299:3c2a218c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1316:Raising Autodiscovery event with status E_ConnectionError (E2-2-1) for eventType 0
2014-09-22 15:17:53.061 Lync[299:3c2a218c] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/417:Received event for type 0 with status E_ConnectionError (E2-2-1)
2014-09-22 15:17:53.061 Lync[299:3c2a218c] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/539:Autodiscovery scheduled retrial timer. Timer 0.000000 seconds
2014-09-22 15:17:53.061 Lync[299:3c2a218c] INFO APPLICATION CAlertReporter.cpp/64:Alert received! Category 1, Type 201, level 0, error E_ConnectionError (E2-2-1), context '', hasAction=false
2014-09-22 15:17:53.061 Lync[299:3c2a218c] INFO APPLICATION CAlertReporter.cpp/117:Alert cleared of Category 1, Type 201, cleared 0 alerts
2014-09-22 15:17:53.062 Lync[299:3c2a218c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. GET-AuthenticatedUserGetRequest (0x6e83da8): E_ConnectionError (E2-2-1) (RemoteNetworkTemporaryError); Done with req.; Stopping resend
timer
2014-09-22 15:17:53.062 Lync[299:3c2a218c] INFO UI CMAlertViewController.mm/87:ObservableListItem Added event received
2014-09-22 15:17:53.062 Lync[299:3c2a218c] INFO UI CMAlertViewController.mm/97:showalert is 1
2014-09-22 15:17:53.063 Lync[299:3c2a218c] INFO UI CMConversationCommon.mm/43:not signed in
2014-09-22 15:17:53.063 Lync[299:3c2a218c] INFO UI CMConversationCommon.mm/43:not signed in
2014-09-22 15:17:53.063 Lync[299:3c2a218c] INFO UI CMConversationCommon.mm/43:not signed in
2014-09-22 15:17:53.063 Lync[299:3c2a218c] INFO UI CMConversationCommon.mm/43:not signed in
2014-09-22 15:17:53.063 Lync[299:3c2a218c] INFO UI CMConversationCommon.mm/43:not signed in
2014-09-22 15:17:53.064 Lync[299:3c2a218c] INFO UI CMNotificationManager.mm/697:desired view is alert, size 1
2014-09-22 15:17:53.064 Lync[299:3c2a218c] INFO UI CMNotificationManager.mm/737:adding the desired view
2014-09-22 15:17:53.065 Lync[299:3c2a218c] INFO UI CMNotificationManager.mm/472:reposition floating views
2014-09-22 15:17:53.065 Lync[299:3c2a218c] INFO UI CMAlertViewController.mm/104:showalert is 1
2014-09-22 15:17:53.065 Lync[299:3c2a218c] INFO UI CMAlertViewController.mm/108:showalert is 0
2014-09-22 15:17:53.066 Lync[299:3c2a218c] INFO UI CMUIUtil.mm/410:Mapping error code = 0x22020001, context = , type = 201
2014-09-22 15:17:53.066 Lync[299:3c2a218c] INFO UI CMUIUtil.mm/1708:Mapped error message is 'Unable to connect to the server. Check your network connection or the server address and try again.Result of Lync Connectivity Analyzer.
External Auto discover service : https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root
Starting Lync server autodiscovery
Please wait; this test may take several minutes to complete...
Starting automatic discovery for secure (HTTPS) internal channel
lyncdiscoverinternal.extdomain.ru can't be resolved by the DNS server. Skipping internal discovery.
Starting automatic discovery for secure (HTTPS) external channel
Server discovery has completed for https://lyncdiscover.extdomain.ru/.
Automatic discovery results for https://lyncdiscover.extdomain.ru/
Access Location : Internal
SIP Server Internal Access : lync.cherry.loc
SIP Server External Access : sip.extdomain.ru
SIP Client Internal Access : lync.cherry.loc
SIP Client External Access : sip.extdomain.ru
Internal Auth broker service : https://lync.cherry.loc/Reach/sip.svc
External Auth broker service : https://lync.cherry.loc/Reach/sip.svc
Internal Auto discover service : https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root
External Auto discover service : https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root
Internal MCX service : https://lync.cherry.loc/Mcx/McxService.svc
External MCX service : https://lync.cherry.loc/Mcx/McxService.svc
Internal UCWA service : https://lync.cherry.loc/ucwa/v1/applications
External UCWA service : https://lync.cherry.loc/ucwa/v1/applications
Internal Webscheduler service : https://lync.cherry.loc/Scheduler
External Webscheduler service : https://lync.cherry.loc/Scheduler
Total server discovery time: 5,0 seconds
Server discovery succeeded for secure (HTTPS) external channel against URL https://lyncdiscover.extdomain.ru/
Starting automatic discovery for unsecure (HTTP) external channel
Couldn't connect to URL http://lyncdiscover.extdomain.ru/[email protected] (HTTP status code NotAcceptable)
Server discovery failed for unsecured external channel against http://lyncdiscover.extdomain.ru/
Starting the requirement tests for Lync Mobile 2013 App
Please wait; this test may take several minutes to complete...
Testing the app requirements using the following discovery response:
Access Location : Internal
SIP Server Internal Access : lync.cherry.loc
SIP Server External Access : sip.extdomain.ru
SIP Client Internal Access : lync.cherry.loc
SIP Client External Access : sip.extdomain.ru
Internal Auth broker service : https://lync.cherry.loc/Reach/sip.svc
External Auth broker service : https://lync.cherry.loc/Reach/sip.svc
Internal Auto discover service : https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root
Internal MCX service : https://lync.cherry.loc/Mcx/McxService.svc
External MCX service : https://lync.cherry.loc/Mcx/McxService.svc
Internal UCWA service : https://lync.cherry.loc/ucwa/v1/applications
External UCWA service : https://lync.cherry.loc/ucwa/v1/applications
Internal Webscheduler service : https://lync.cherry.loc/Scheduler
External Webscheduler service : https://lync.cherry.loc/Scheduler
Starting tests for Mobility (UCWA) service
Verifying internal Ucwa service: https://lync.cherry.loc/ucwa/v1/applications
Successfully created the UCWA service
Completed tests for Mobility (UCWA) service
Verification failed for Mobility (UCWA) service. The service could not be reached from an external network.
Select All results above for more information about the failures. Detailed information can also be found in the log file.
Your deployment meets the minimum requirements for Lync Mobile 2013 App. -
Out of office replies in Exchange 2013 not working for external recipients
Hi,
Few days ago a couple of company workers went to vacation. They set up OOF automatic replies in OWA 2013. However automatic replies are not working for external recipients (outside of company). Internal users (company users) receive OOF notification.
I'm using smart host in sender connector configuration (SMTP server of internet provider) to deliver emails. Any clues about this problem ? Please find below part of the transaction log. For testing purposes i set up administrator account
to be on vacation.
HARED... SMTP
[email protected]
{[email protected]} Automatic reply: vacation test
RECEIVE SMTP
[email protected]
{[email protected]} Automatic reply: vacation test
DROP ROUTING
[email protected]
{[email protected]} Automatic reply: vacation test
AGENT... AGENT [email protected]
{[email protected]} Automatic reply: vacation test
HARED... SMTP
[email protected]
{[email protected]} Automatic reply: vacation test
RECEIVE SMTP
[email protected]
{[email protected]} Automatic reply: vacation test
AGENT... AGENT [email protected]
{[email protected]} Automatic reply: vacation test
TRANSFER ROUTING [email protected]
{[email protected]} Automatic reply: vacation test
FAIL SMTP
[email protected]
{[email protected]} Automatic reply: vacation testHi Informus,
Please check if it is allowed in AllowedOOFType of the Remote Domain *
In Exchange 2013, the only way to see or change the current configuration for automatic replying and forwarding to the Internet is via the Exchange Management Shell (EMS) with PowerShell commands.
To get the currently configured Remote Domains, use:
Get-RemoteDomain
Name DomainName
AllowedOOFType
Default *
External
Get-RemoteDomain Default | fl AllowedOOFType, AutoReplyEnabled, AutoForwardEnabled
AllowedOOFType : External
AutoReplyEnabled : False
AutoForwardEnabled : False
To change the settings, use the Set-RemoteDomain command.
Enable automatic replies
Set-RemoteDomain -AutoReplyEnabled $true
Enable automatic forwards
Set-RemoteDomain –AutoForwardEnabled $true
Enable OOF for Outlook 2003 and previous (for Exchange 2007 and 2010 support)
Set-RemoteDomain –AllowedOOFType $ExternalLegacy
To change all these properties at once, you can use:
Set-RemoteDomain Default -AutoReplyEnabled $true –AutoForwardEnabled $true –AllowedOOFType $ExternalLegacy
Note:
Valid settings for the AllowedOOFType property are:
External
This is the default and only allows for the new style OOF messages as introduced in Outlook 2007.
ExternalLegacy
This settings allows for both the new style and old style OOF messages and needs to be set if you want to enable external OOF support for Outlook 2003 as well.
None
This setting doesn’t allow for the use of OOF messages at all (both internal and external).
InternalLegacy
This setting only allows for internal OOF messages to be sent for all Outlook versions.
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you. -
Office Web Apps not working externally SharePoint 2013
In the production farm we have connected office web apps server which is FQDN server name ( xxx.xxx.corp.local) , we can open the sites internally without any issues, but when we open from externally office web apps asking for authentication and not working
properly.
Please help me how to make it work in external.
Thanks, Ram ChYou will need a public facing URL or IP address. Check below
You need to configure your OWA for internet
New-OfficeWebAppsFarm –InternalUrl "md1xxx95.jdaxx.corp.local" -ExternalUrl "http://198.xxx.xxx.xxx" -EditingEnabled
Set-SPWOPIZone –zone
“external-http”
Detailed steps in
http://social.technet.microsoft.com/wiki/contents/articles/19039.sharepoint-2013-how-to-enable-office-web-apps-to-work-in-both-internal-and-external-environments.aspx
Set-SPWOPIZone –zone “external-http”
Set-SPWOPIZone –zone “external-http”
If this helped you resolve your issue, please mark it Answered -
Lync 2013 Mobility - Works for Android, not iOS
Here's the situation I am facing right now.
I have installed Lync 2013 for a client and have everything working finally but have hit a roadblock that I just can't seem to overcome.
The environment is this:
1 Lync 2013 Standard Edition Server (Front End)
1 Lync 2013 Persistent Chat Server
1 Lync 2013 Edge Server
1 Reverse Proxy Server
Like I said everything looks like it's working, save one thing. Clients using iPhones can't connect to the service but Android devices can. That's the only thing.
Here is a log snippet from my test device:
POST https://lync.mydomain.org/webticket/webticketservice.svc
Request Id: 0x70b5f68
HttpHeader:Content-Length 1293
HttpHeader:Content-Type text/html
HttpHeader:Date Wed, 18 Dec 2013 17:40:32 GMT
HttpHeader:Server Microsoft-IIS/7.5
HttpHeader:StatusCode 401
HttpHeader:Www-Authenticate Negotiate, NTLM, Basic realm="lync.mydomain.org"
HttpHeader:X-Powered-By ASP.NET
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>401 - Unauthorized: Access is denied due to invalid credentials.</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana, Arial, Helvetica, sans-serif;background:#EEEEEE;}
fieldset{padding:0 15px 10px 15px;}
h1{font-size:2.4em;margin:0;color:#FFF;}
h2{font-size:1.7em;margin:0;color:#CC0000;}
h3{font-size:1.2em;margin:10px 0 0 0;color:#000000;}
#header{width:96%;margin:0 0 0 0;padding:6px 2% 6px 2%;font-family:"trebuchet MS", Verdana, sans-serif;color:#FFF;
background-color:#555555;}
#content{margin:0 0 0 2%;;}
.content-container{background:#FFF;width:96%;margin-top:8px;padding:10px;;}
-->
</style>
</head>
<body>
<div id="header"><h1>Server Error</h1></div>
<div id="content">
<div class="content-container"><fieldset>
<h2>401 - Unauthorized: Access is denied due to invalid credentials.</h2>
<h3>You do not have permission to view this directory or page using the credentials that you supplied.</h3>
</fieldset></div>
</div>
</body>
</html>
</ReceivedResponse>
Everything looks like it's going good until it gets there and then at the bottom of the log I see this:
2013-12-18 11:40:47.602 Lync[7237:907] is not a valid email address.
This user has no problems signing on to his computer or Lync there. Also, I can sign on to an Android device with his account.
If anyone has an idea on this I welcome it. Please help.Hi Okrobpr,
Did you solved the issue with the help of Michael provided?
Basically the IOS clients do not support the basic NTLM Authentication method while Windows Phone and Android clients do. So you can check the UseWindowsAuth option is true running the command in Lync Server Management Shell:
Get-CsWebServiceConfiguration
If it shows NTLM you can run the command:
Set-CsWebServiceConfiguration –UseWindowsAuth Negotiate
Get-CsWebServiceConfiguration to make it to be Negotiate.
Please also make sure you have updated to the latest version for Lync Server and clients.
You can check if there are any errors in event viewer of FE server.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Lync integration not working after Exchange 2013 SP1 is installed...
Hi,
I have two Exchange 2013 servers running and everything is fine, almost.
The problem is that on the first server we had OWA with Lync integration working before installing SP1, but after the installation of SP1, it doesn't Work any more.
The second server was installed with SP1 from the start, but we can't get the Lync integration to Work on this one either..
When we log in to OWA, it just starts to sign in but then says "there was a problem signing in, if this continues please contact your helpdesk"
I have checked the Exchange server for events, and i can see the event ID 112 everytime i recycle the Application Pool, so there are some connection between Exchange and Lync..
Have any of you Guys seen or experienced any thing like this?
Thanks in advance.
Regards
KennethHi,
I recommend that you refer to the following article to troubleshoot the issue:
Troubleshooting tips for Exchange 2013 OWA IM Integration to Lync 2013
This post describes how to configure Exchange 2013 OWA to have IM integration to Lync 2013. Here I would like to give some troubleshooting tips in case you can't get the integration to work.
In addition, here is a similar thread for your reference:
Lync 2013 with Exchange 2013 SP1 OWA integration failed
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support -
Lync Mobility Not Working Internally
Hi Experts,
Actually i am a newbie and i have installed Lync 2013 (without Edge Server), and all services(autodiscovery with lync PC clients, A/V, IM, presence etc etc ) are working (internally and externally) except Mobility functionality. Following are the log files
from lync 2013 mobile client for your kind reference. Please assist me that where exactly i need to start troubleshooting.
</SentRequest>
2014-02-25 17:25:24.357 Lync[2099:3b71618c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl called with url = http://lyncdiscoverinternal.alnuaimi-group.com/, hopCount = 0, maxHops = 10
2014-02-25 17:25:24.357 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/409:Allocating stream 0x1154a50 for url - https://lyncdiscoverinternal.alnuaimi-group.com/ with persistent id as 6
2014-02-25 17:25:24.357 Lync[2099:3b71618c] INFO TRANSPORT CTransportThread.cpp/131:Added Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2014-02-25 17:25:24.357 Lync[2099:734c000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for url https://lyncdiscoverinternal.alnuaimi-group.com/?sipuri=sip:[email protected]. Sending over direct connection.
2014-02-25 17:25:24.357 Lync[2099:3b71618c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. UrlTrustResolver(0x5c5d2a8)
2014-02-25 17:25:24.357 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1947:Successfully started the GetUserUrlOperation request for http://lyncdiscoverinternal.alnuaimi-group.com/?sipuri=sip:[email protected]
2014-02-25 17:25:24.357 Lync[2099:3b71618c] INFO TRANSPORT TransportUtilityFunctions.cpp/488:Extracted alnuaimi-group.com from sip:[email protected]
2014-02-25 17:25:24.358 Lync[2099:3b71618c] INFO APPLICATION CUcwaAppSession.cpp/998:CUcwaAppSession::setNewActualState() state=1
2014-02-25 17:25:24.358 Lync[2099:3b71618c] INFO APPLICATION CApplication.cpp/1858:CUcwaAppSession::signIn() succeeded
2014-02-25 17:25:24.358 Lync[2099:734c000] INFO TRANSPORT CTransportThread.cpp/343:Sent Request(UcwaAutoDiscoveryRequest) to Request Processor
2014-02-25 17:25:24.358 Lync[2099:3b71618c] INFO UI CMUIManager.mm/982:UpdateViews
2014-02-25 17:25:24.358 Lync[2099:3b71618c] INFO UI CMUIManager.mm/1050:ActualState = IsSigningIn DesiredState = BeSignedIn DataAvailable = 0 Showing UI = SigningInViewController
2014-02-25 17:25:24.359 Lync[2099:734c000] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName ([email protected]) domain () username ([email protected]) password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2014-02-25 17:25:24.359 Lync[2099:734c000] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET http://lyncdiscoverinternal.alnuaimi-group.com/
Request Id: 0x5c5d2a8
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2014-02-25 17:25:24.360 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/409:Allocating stream 0x11b7350 for url - http://lyncdiscoverinternal.alnuaimi-group.com/ with persistent id as 7
2014-02-25 17:25:24.366 Lync[2099:734c000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for url http://lyncdiscoverinternal.alnuaimi-group.com/. Sending over direct connection.
2014-02-25 17:25:24.366 Lync[2099:734c000] INFO TRANSPORT CHttpStreamPool.cpp/556:Not setting TLS as the url(http://lyncdiscoverinternal.alnuaimi-group.com/) is not https
2014-02-25 17:25:24.369 Lync[2099:734c000] ERROR TRANSPORT CHttpConnection.cpp/1024:Request Type = UcwaAutoDiscoveryRequest Error domain = kCFErrorDomainCFNetwork code = 0x2 ErrorDescription = The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.) ErrorFailureReason = ErrorRecoverySuggestion =
2014-02-25 17:25:24.369 Lync[2099:734c000] ERROR UTILITIES CHttpConnection.cpp/953:GetAddrInfo returned has error 0x1176b40
2014-02-25 17:25:24.369 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/477:Releasing stream 0x1154a50.
2014-02-25 17:25:24.369 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing stream 0x1154a50.
2014-02-25 17:25:24.369 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x22020001
2014-02-25 17:25:24.370 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The retry counter is: 0
2014-02-25 17:25:24.370 Lync[2099:734c000] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName ([email protected]) domain () username ([email protected]) password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2014-02-25 17:25:24.370 Lync[2099:734c000] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET https://lyncdiscoverinternal.alnuaimi-group.com/?sipuri=sip:[email protected]
Request Id: 0x5cb1c18
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2014-02-25 17:25:24.370 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/409:Allocating stream 0x1139940 for url - https://lyncdiscoverinternal.alnuaimi-group.com/ with persistent id as 6
2014-02-25 17:25:24.371 Lync[2099:734c000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for url https://lyncdiscoverinternal.alnuaimi-group.com/?sipuri=sip:[email protected]. Sending over direct connection.
2014-02-25 17:25:24.371 Lync[2099:734c000] ERROR TRANSPORT CHttpConnection.cpp/1024:Request Type = UcwaAutoDiscoveryRequest Error domain = kCFErrorDomainCFNetwork code = 0x2 ErrorDescription = The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.) ErrorFailureReason = ErrorRecoverySuggestion =
2014-02-25 17:25:24.372 Lync[2099:734c000] ERROR UTILITIES CHttpConnection.cpp/953:GetAddrInfo returned has error 0x1176b40
2014-02-25 17:25:24.372 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/477:Releasing stream 0x11b7350.
2014-02-25 17:25:24.372 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing stream 0x11b7350.
2014-02-25 17:25:24.372 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x22020001
2014-02-25 17:25:24.373 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The retry counter is: 0
2014-02-25 17:25:24.373 Lync[2099:734c000] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName ([email protected]) domain () username ([email protected]) password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2014-02-25 17:25:24.373 Lync[2099:734c000] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET http://lyncdiscoverinternal.alnuaimi-group.com/
Request Id: 0x5c5d2a8
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2014-02-25 17:25:24.373 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/409:Allocating stream 0x11f0c20 for url - http://lyncdiscoverinternal.alnuaimi-group.com/ with persistent id as 7
2014-02-25 17:25:24.373 Lync[2099:734c000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for url http://lyncdiscoverinternal.alnuaimi-group.com/. Sending over direct connection.
2014-02-25 17:25:24.374 Lync[2099:734c000] INFO TRANSPORT CHttpStreamPool.cpp/556:Not setting TLS as the url(http://lyncdiscoverinternal.alnuaimi-group.com/) is not https2014-02-25 17:25:24.373 Lync[2099:707] Unable to simultaneously satisfy constraints.
Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. (Note: If you're seeing NSAutoresizingMaskLayoutConstraints that you don't understand, refer to the documentation for the UIView property translatesAutoresizingMaskIntoConstraints)
"<NSLayoutConstraint:0x5cc4200 UIImageView:0x5cba360.centerX == UILabel:0x5ca2760.centerX>",
"<NSLayoutConstraint:0x5cc4260 UIView:0x5cfa610.centerX == UIImageView:0x5cba360.centerX>",
"<NSLayoutConstraint:0x5ca07a0 H:|-(26)-[UILabel:0x5ca2760] (Names: '|':UIView:0x5cfa610 )>",
"<NSLayoutConstraint:0x5ca07d0 H:[UILabel:0x5ca2760]-(25)-| (Names: '|':UIView:0x5cfa610 )>"
Will attempt to recover by breaking constraint
<NSLayoutConstraint:0x5cc4200 UIImageView:0x5cba360.centerX == UILabel:0x5ca2760.centerX>
Break on objc_exception_throw to catch this in the debugger.
The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKit/UIView.h> may also be helpful.
2014-02-25 17:25:24.375 Lync[2099:734c000] ERROR TRANSPORT CHttpConnection.cpp/1024:Request Type = UcwaAutoDiscoveryRequest Error domain = kCFErrorDomainCFNetwork code = 0x2 ErrorDescription = The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.) ErrorFailureReason = ErrorRecoverySuggestion =
2014-02-25 17:25:24.375 Lync[2099:734c000] ERROR UTILITIES CHttpConnection.cpp/953:GetAddrInfo returned has error 0x1176b40
2014-02-25 17:25:24.375 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/477:Releasing stream 0x1139940.
2014-02-25 17:25:24.375 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing stream 0x1139940.
2014-02-25 17:25:24.375 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x22020001
2014-02-25 17:25:24.376 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The retry counter is: 1
2014-02-25 17:25:24.376 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x5cb1c18)
2014-02-25 17:25:24.376 Lync[2099:734c000] ERROR TRANSPORT CHttpConnection.cpp/1024:Request Type = UcwaAutoDiscoveryRequest Error domain = kCFErrorDomainCFNetwork code = 0x2 ErrorDescription = The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.) ErrorFailureReason = ErrorRecoverySuggestion =
2014-02-25 17:25:24.376 Lync[2099:707] Unable to simultaneously satisfy constraints.
Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. (Note: If you're seeing NSAutoresizingMaskLayoutConstraints that you don't understand, refer to the documentation for the UIView property translatesAutoresizingMaskIntoConstraints)
"<NSLayoutConstraint:0x5cf38b0 UIView:0x5cfa610.centerX == UILabel:0x5ca2760.centerX>",
"<NSLayoutConstraint:0x5ca07a0 H:|-(26)-[UILabel:0x5ca2760] (Names: '|':UIView:0x5cfa610 )>",
"<NSLayoutConstraint:0x5ca07d0 H:[UILabel:0x5ca2760]-(25)-| (Names: '|':UIView:0x5cfa610 )>"
Will attempt to recover by breaking constraint
<NSLayoutConstraint:0x5cf38b0 UIView:0x5cfa610.centerX == UILabel:0x5ca2760.centerX>
Break on objc_exception_throw to catch this in the debugger.
The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKit/UIView.h> may also be helpful.
2014-02-25 17:25:24.376 Lync[2099:734c000] ERROR UTILITIES CHttpConnection.cpp/953:GetAddrInfo returned has error 0x1176b40
2014-02-25 17:25:24.377 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/477:Releasing stream 0x11f0c20.
2014-02-25 17:25:24.377 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing stream 0x11f0c20.
2014-02-25 17:25:24.377 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x22020001
2014-02-25 17:25:24.377 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The retry counter is: 1
2014-02-25 17:25:24.377 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x5c5d2a8)
2014-02-25 17:25:24.377 Lync[2099:707] Unable to simultaneously satisfy constraints.
Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. (Note: If you're seeing NSAutoresizingMaskLayoutConstraints that you don't understand, refer to the documentation for the UIView property translatesAutoresizingMaskIntoConstraints)
"<NSLayoutConstraint:0x5cf3850 UILabel:0x5ca2760.centerX == UIActivityIndicatorView:0x5c59ba0.centerX>",
"<NSLayoutConstraint:0x5ca07a0 H:|-(26)-[UILabel:0x5ca2760] (Names: '|':UIView:0x5cfa610 )>",
"<NSLayoutConstraint:0x5ca07d0 H:[UILabel:0x5ca2760]-(25)-| (Names: '|':UIView:0x5cfa610 )>",
"<NSLayoutConstraint:0x5c58290 UIView:0x5cfa610.centerX == UIActivityIndicatorView:0x5c59ba0.centerX>"
Will attempt to recover by breaking constraint
<NSLayoutConstraint:0x5cf3850 UILabel:0x5ca2760.centerX == UIActivityIndicatorView:0x5c59ba0.centerX>
Break on objc_exception_throw to catch this in the debugger.
The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKit/UIView.h> may also be helpful.
2014-02-25 17:25:24.380 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.380 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.380 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.380 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.380 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.380 Lync[2099:3b71618c] INFO APPLICATION CEwsAttachmentManager.cpp/196:Scheduling cleanup run in 86400sec
2014-02-25 17:25:24.380 Lync[2099:3b71618c] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(1) returning: credType (1) signInName ([email protected]) domain (alnuaimi-group) username (test2) password.empty() (0) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(1)
2014-02-25 17:25:24.381 Lync[2099:3b71618c] INFO UI CMAudioUtil.mm/322:stopSound
2014-02-25 17:25:24.381 Lync[2099:3b71618c] INFO UI CMAudioUtil.mm/322:stopSound
2014-02-25 17:25:24.381 Lync[2099:3b71618c] INFO UI CMAudioUtil.mm/322:stopSound
2014-02-25 17:25:24.381 Lync[2099:3b71618c] INFO UI CMAudioVideoToastViewController.mm/961:Cancelling local notification
2014-02-25 17:25:24.381 Lync[2099:3b71618c] INFO UI CMUIManager.mm/982:UpdateViews
2014-02-25 17:25:24.381 Lync[2099:3b71618c] INFO UI CMUIManager.mm/1050:ActualState = IsSigningIn DesiredState = BeSignedIn DataAvailable = 0 Showing UI = SigningInViewController
2014-02-25 17:25:24.382 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.382 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.382 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.382 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.382 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.382 Lync[2099:3b71618c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2014-02-25 17:25:24.382 Lync[2099:3b71618c] ERROR APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/325:Request failed. Error - E_ConnectionError (E2-2-1)
2014-02-25 17:25:24.382 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation completed with url = https://lyncdiscoverinternal.alnuaimi-group.com/?sipuri=sip:[email protected], userUrl = , status = E_ConnectionError (E2-2-1)
2014-02-25 17:25:24.383 Lync[2099:3b71618c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. GET-UnAuthenticatedGet(0x5cb1c18): E_ConnectionError (E2-2-1) (RemoteNetworkTemporaryError); Done with req.; Stopping resend timer
2014-02-25 17:25:24.383 Lync[2099:3b71618c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2014-02-25 17:25:24.383 Lync[2099:3b71618c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with url = http://lyncdiscoverinternal.alnuaimi-group.com/, Hops = 1, status = E_ConnectionError (E2-2-1)
2014-02-25 17:25:24.383 Lync[2099:3b71618c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. UrlTrustResolver(0x5c5d2a8): E_ConnectionError (E2-2-1) (RemoteNetworkTemporaryError); Done with req.; Stopping resend timer
2014-02-25 17:25:24.383 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/393:CUcwaAutoDiscoverGetUserUrlOperation::onEvent received. Status = E_ConnectionError (E2-2-1), url = http://lyncdiscoverinternal.alnuaimi-group.com/
2014-02-25 17:25:24.383 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation completed with url = http://lyncdiscoverinternal.alnuaimi-group.com/?sipuri=sip:[email protected], userUrl = , status = E_ConnectionError (E2-2-1)
2014-02-25 17:25:24.383 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1734:AutoDiscovery: Falling back to probing external urls
2014-02-25 17:25:24.383 Lync[2099:3b71618c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with url = https://lyncdiscover.alnuaimi-group.com/?sipuri=sip:[email protected], maxHops = 10
2014-02-25 17:25:24.384 Lync[2099:3b71618c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl called with url = https://lyncdiscover.alnuaimi-group.com/, hopCount = 0, maxHops = 10
2014-02-25 17:25:24.384 Lync[2099:3b71618c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with url = https://lyncdiscover.alnuaimi-group.com/, Hops = 0, status = S_OK (S0-0-0)
2014-02-25 17:25:24.384 Lync[2099:3b71618c] INFO TRANSPORT CTransportThread.cpp/131:Added Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2014-02-25 17:25:24.384 Lync[2099:3b71618c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. GET-UnAuthenticatedGet(0x113bad8)
2014-02-25 17:25:24.384 Lync[2099:734c000] INFO TRANSPORT CTransportThread.cpp/343:Sent Request(UcwaAutoDiscoveryRequest) to Request Processor
2014-02-25 17:25:24.384 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1776:Successfully started the GetUserUrlOperation request for https://lyncdiscover.alnuaimi-group.com/?sipuri=sip:[email protected]
2014-02-25 17:25:24.384 Lync[2099:734c000] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName ([email protected]) domain () username ([email protected]) password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2014-02-25 17:25:24.384 Lync[2099:3b71618c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with url = http://lyncdiscover.alnuaimi-group.com/?sipuri=sip:[email protected], maxHops = 10
2014-02-25 17:25:24.385 Lync[2099:734c000] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET https://lyncdiscover.alnuaimi-group.com/?sipuri=sip:[email protected]
Request Id: 0x113bad8
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2014-02-25 17:25:24.385 Lync[2099:3b71618c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl called with url = http://lyncdiscover.alnuaimi-group.com/, hopCount = 0, maxHops = 10
2014-02-25 17:25:24.385 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/409:Allocating stream 0x101b2d0 for url - https://lyncdiscover.alnuaimi-group.com/ with persistent id as 6
2014-02-25 17:25:24.385 Lync[2099:3b71618c] INFO TRANSPORT CTransportThread.cpp/131:Added Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2014-02-25 17:25:24.385 Lync[2099:734c000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for url https://lyncdiscover.alnuaimi-group.com/?sipuri=sip:[email protected]. Sending over direct connection.
2014-02-25 17:25:24.385 Lync[2099:3b71618c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. UrlTrustResolver(0x113bfd8)
2014-02-25 17:25:24.386 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1812:Successfully started the GetUserUrlOperation request for http://lyncdiscover.alnuaimi-group.com/?sipuri=sip:[email protected]
2014-02-25 17:25:24.387 Lync[2099:734c000] INFO TRANSPORT CTransportThread.cpp/343:Sent Request(UcwaAutoDiscoveryRequest) to Request Processor
2014-02-25 17:25:24.387 Lync[2099:734c000] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName ([email protected]) domain () username ([email protected]) password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2014-02-25 17:25:24.388 Lync[2099:734c000] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET http://lyncdiscover.alnuaimi-group.com/
Request Id: 0x113bfd8
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2014-02-25 17:25:24.388 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/409:Allocating stream 0x5c90f90 for url - http://lyncdiscover.alnuaimi-group.com/ with persistent id as 7
2014-02-25 17:25:24.388 Lync[2099:734c000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for url http://lyncdiscover.alnuaimi-group.com/. Sending over direct connection.
2014-02-25 17:25:24.388 Lync[2099:734c000] INFO TRANSPORT CHttpStreamPool.cpp/556:Not setting TLS as the url(http://lyncdiscover.alnuaimi-group.com/) is not https
2014-02-25 17:25:24.389 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.390 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.390 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.390 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.390 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.391 Lync[2099:734c000] ERROR TRANSPORT CHttpConnection.cpp/1024:Request Type = UcwaAutoDiscoveryRequest Error domain = kCFErrorDomainCFNetwork code = 0x2 ErrorDescription = The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.) ErrorFailureReason = ErrorRecoverySuggestion =
2014-02-25 17:25:24.391 Lync[2099:734c000] ERROR UTILITIES CHttpConnection.cpp/953:GetAddrInfo returned has error 0x1176b40
2014-02-25 17:25:24.392 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/477:Releasing stream 0x101b2d0.
2014-02-25 17:25:24.392 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing stream 0x101b2d0.
2014-02-25 17:25:24.392 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x22020001
2014-02-25 17:25:24.392 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The retry counter is: 0
2014-02-25 17:25:24.392 Lync[2099:734c000] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName ([email protected]) domain () username ([email protected]) password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2014-02-25 17:25:24.394 Lync[2099:734c000] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET https://lyncdiscover.alnuaimi-group.com/?sipuri=sip:[email protected]
Request Id: 0x113bad8
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2014-02-25 17:25:24.394 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/409:Allocating stream 0x11b8010 for url - https://lyncdiscover.alnuaimi-group.com/ with persistent id as 6
2014-02-25 17:25:24.394 Lync[2099:734c000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for url https://lyncdiscover.alnuaimi-group.com/?sipuri=sip:[email protected]. Sending over direct connection.
2014-02-25 17:25:24.395 Lync[2099:734c000] ERROR TRANSPORT CHttpConnection.cpp/1024:Request Type = UcwaAutoDiscoveryRequest Error domain = kCFErrorDomainCFNetwork code = 0x2 ErrorDescription = The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.) ErrorFailureReason = ErrorRecoverySuggestion =
2014-02-25 17:25:24.395 Lync[2099:734c000] ERROR UTILITIES CHttpConnection.cpp/953:GetAddrInfo returned has error 0x1176b40
2014-02-25 17:25:24.395 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/477:Releasing stream 0x5c90f90.
2014-02-25 17:25:24.395 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing stream 0x5c90f90.
2014-02-25 17:25:24.396 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x22020001
2014-02-25 17:25:24.396 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The retry counter is: 0
2014-02-25 17:25:24.396 Lync[2099:734c000] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName ([email protected]) domain () username ([email protected]) password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2014-02-25 17:25:24.396 Lync[2099:734c000] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET http://lyncdiscover.alnuaimi-group.com/
Request Id: 0x113bfd8
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2014-02-25 17:25:24.397 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/409:Allocating stream 0x11ce580 for url - http://lyncdiscover.alnuaimi-group.com/ with persistent id as 7
2014-02-25 17:25:24.397 Lync[2099:734c000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for url http://lyncdiscover.alnuaimi-group.com/. Sending over direct connection.
2014-02-25 17:25:24.397 Lync[2099:734c000] INFO TRANSPORT CHttpStreamPool.cpp/556:Not setting TLS as the url(http://lyncdiscover.alnuaimi-group.com/) is not https
2014-02-25 17:25:24.398 Lync[2099:734c000] ERROR TRANSPORT CHttpConnection.cpp/1024:Request Type = UcwaAutoDiscoveryRequest Error domain = kCFErrorDomainCFNetwork code = 0x2 ErrorDescription = The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.) ErrorFailureReason = ErrorRecoverySuggestion =
2014-02-25 17:25:24.399 Lync[2099:734c000] ERROR UTILITIES CHttpConnection.cpp/953:GetAddrInfo returned has error 0x1176b40
2014-02-25 17:25:24.399 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/477:Releasing stream 0x11b8010.
2014-02-25 17:25:24.399 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing stream 0x11b8010.
2014-02-25 17:25:24.399 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x22020001
2014-02-25 17:25:24.399 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The retry counter is: 1
2014-02-25 17:25:24.399 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x113bad8)
2014-02-25 17:25:24.400 Lync[2099:734c000] ERROR TRANSPORT CHttpConnection.cpp/1024:Request Type = UcwaAutoDiscoveryRequest Error domain = kCFErrorDomainCFNetwork code = 0x2 ErrorDescription = The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.) ErrorFailureReason = ErrorRecoverySuggestion =
2014-02-25 17:25:24.400 Lync[2099:734c000] ERROR UTILITIES CHttpConnection.cpp/953:GetAddrInfo returned has error 0x1176b40
2014-02-25 17:25:24.400 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/477:Releasing stream 0x11ce580.
2014-02-25 17:25:24.400 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing stream 0x11ce580.
2014-02-25 17:25:24.400 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x22020001
2014-02-25 17:25:24.401 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The retry counter is: 1
2014-02-25 17:25:24.401 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x113bfd8)
2014-02-25 17:25:24.403 Lync[2099:3b71618c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2014-02-25 17:25:24.403 Lync[2099:3b71618c] ERROR APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/325:Request failed. Error - E_ConnectionError (E2-2-1)
2014-02-25 17:25:24.403 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation completed with url = https://lyncdiscover.alnuaimi-group.com/?sipuri=sip:[email protected], userUrl = , status = E_ConnectionError (E2-2-1)
2014-02-25 17:25:24.403 Lync[2099:3b71618c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. GET-UnAuthenticatedGet(0x113bad8): E_ConnectionError (E2-2-1) (RemoteNetworkTemporaryError); Done with req.; Stopping resend timer
2014-02-25 17:25:24.403 Lync[2099:3b71618c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2014-02-25 17:25:24.404 Lync[2099:3b71618c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with url = http://lyncdiscover.alnuaimi-group.com/, Hops = 1, status = E_ConnectionError (E2-2-1)
2014-02-25 17:25:24.404 Lync[2099:3b71618c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. UrlTrustResolver(0x113bfd8): E_ConnectionError (E2-2-1) (RemoteNetworkTemporaryError); Done with req.; Stopping resend timer
2014-02-25 17:25:24.404 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/393:CUcwaAutoDiscoverGetUserUrlOperation::onEvent received. Status = E_ConnectionError (E2-2-1), url = http://lyncdiscover.alnuaimi-group.com/
2014-02-25 17:25:24.404 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation completed with url = http://lyncdiscover.alnuaimi-group.com/?sipuri=sip:[email protected], userUrl = , status = E_ConnectionError (E2-2-1)
2014-02-25 17:25:24.404 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1247:Raising Autodiscovery event with status E_ConnectionError (E2-2-1) for eventType 0
2014-02-25 17:25:24.404 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/417:Received event for type 0 with status E_ConnectionError (E2-2-1)
2014-02-25 17:25:24.404 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/539:Autodiscovery scheduled retrial timer. Timer 0.000000 seconds
2014-02-25 17:25:24.404 Lync[2099:3b71618c] INFO APPLICATION CAlertReporter.cpp/64:Alert received! Category 1, Type 201, level 0, error E_ConnectionError (E2-2-1), context '', hasAction=false
2014-02-25 17:25:24.404 Lync[2099:3b71618c] INFO APPLICATION CAlertReporter.cpp/117:Alert cleared of Category 1, Type 201, cleared 0 alerts
2014-02-25 17:25:24.405 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/2126:suspensionState = 2
2014-02-25 17:25:24.405 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/2102:adIsEnabled = 1, sipUri = sip:[email protected], m_internalADUrlInput = https://lync.alnuaimi-group.comm_externalADUrlInput = https://lync.alnuaimi-group.com
2014-02-25 17:25:24.405 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1008:Discover UCWA urls for sip:[email protected]
2014-02-25 17:25:24.405 Lync[2099:3b71618c] INFO TRANSPORT TransportUtilityFunctions.cpp/488:Extracted alnuaimi-group.com from sip:[email protected]
2014-02-25 17:25:24.405 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1066:Starting Lync Discovery with urls http://lyncdiscoverinternal.alnuaimi-group.com/?sipuri=sip:[email protected] and http://lyncdiscover.alnuaimi-group.com/?sipuri=sip:[email protected]
2014-02-25 17:25:24.405 Lync[2099:3b71618c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with url = https://lyncdiscoverinternal.alnuaimi-group.com/?sipuri=sip:[email protected], maxHops = 10
2014-02-25 17:25:24.405 Lync[2099:3b71618c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl called with url = https://lyncdiscoverinternal.alnuaimi-group.com/, hopCount = 0, maxHops = 10
2014-02-25 17:25:24.405 Lync[2099:3b71618c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with url = https://lyncdiscoverinternal.alnuaimi-group.com/, Hops = 0, status = S_OK (S0-0-0)
2014-02-25 17:25:24.406 Lync[2099:3b71618c] INFO TRANSPORT CTransportThread.cpp/131:Added Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2014-02-25 17:25:24.406 Lync[2099:3b71618c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. GET-UnAuthenticatedGet(0x5c65368)
2014-02-25 17:25:24.406 Lync[2099:734c000] INFO TRANSPORT CTransportThread.cpp/343:Sent Request(UcwaAutoDiscoveryRequest) to Request Processor
2014-02-25 17:25:24.406 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1915:Successfully started the GetUserUrlOperation request for https://lyncdiscoverinternal.alnuaimi-group.com/?sipuri=sip:[email protected]
2014-02-25 17:25:24.406 Lync[2099:3b71618c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with url = http://lyncdiscoverinternal.alnuaimi-group.com/?sipuri=sip:[email protected], maxHops = 10
2014-02-25 17:25:24.406 Lync[2099:3b71618c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl called with url = http://lyncdiscoverinternal.alnuaimi-group.com/, hopCount = 0, maxHops = 10
2014-02-25 17:25:24.406 Lync[2099:3b71618c] INFO TRANSPORT CTransportThread.cpp/131:Added Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2014-02-25 17:25:24.406 Lync[2099:3b71618c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. UrlTrustResolver(0x5cf9638)
2014-02-25 17:25:24.406 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1947:Successfully started the GetUserUrlOperation request for http://lyncdiscoverinternal.alnuaimi-group.com/?sipuri=sip:[email protected]
2014-02-25 17:25:24.407 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/539:Autodiscovery scheduled retrial timer. Timer 30.000000 seconds
2014-02-25 17:25:24.407 Lync[2099:734c000] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName ([email protected]) domain () username ([email protected]) password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2014-02-25 17:25:24.407 Lync[2099:3b71618c] INFO UI CMAlertViewController.mm/93:ObservableListItem Added event received
2014-02-25 17:25:24.407 Lync[2099:734c000] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET https://lyncdiscoverinternal.alnuaimi-group.com/?sipuri=sip:[email protected]
Request Id: 0x5c65368
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2014-02-25 17:25:24.407 Lync[2099:3b71618c] INFO UI CMAlertViewController.mm/103:showalert is 1
2014-02-25 17:25:24.407 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.408 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/409:Allocating stream 0x11f5650 for url - https://lyncdiscoverinternal.alnuaimi-group.com/ with persistent id as 6
2014-02-25 17:25:24.408 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.408 Lync[2099:734c000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for url https://lyncdiscoverinternal.alnuaimi-group.com/?sipuri=sip:[email protected]. Sending over direct connection.
2014-02-25 17:25:24.408 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.408 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.408 Lync[2099:3b71618c] INFO UI CMConversationCommon.mm/43:not signed in
2014-02-25 17:25:24.408 Lync[2099:3b71618c] INFO UI CMNotificationManager.mm/705:desired view is alert, size 1
2014-02-25 17:25:24.408 Lync[2099:3b71618c] INFO UI CMNotificationManager.mm/745:adding the desired view
2014-02-25 17:25:24.408 Lync[2099:734c000] INFO TRANSPORT CTransportThread.cpp/343:Sent Request(UcwaAutoDiscoveryRequest) to Request Processor
2014-02-25 17:25:24.409 Lync[2099:734c000] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName ([email protected]) domain () username ([email protected]) password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2014-02-25 17:25:24.409 Lync[2099:734c000] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET http://lyncdiscoverinternal.alnuaimi-group.com/
Request Id: 0x5cf9638
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2014-02-25 17:25:24.409 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/409:Allocating stream 0x1012760 for url - http://lyncdiscoverinternal.alnuaimi-group.com/ with persistent id as 7
2014-02-25 17:25:24.409 Lync[2099:734c000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for url http://lyncdiscoverinternal.alnuaimi-group.com/. Sending over direct connection.
2014-02-25 17:25:24.409 Lync[2099:734c000] INFO TRANSPORT CHttpStreamPool.cpp/556:Not setting TLS as the url(http://lyncdiscoverinternal.alnuaimi-group.com/) is not https
2014-02-25 17:25:24.411 Lync[2099:3b71618c] INFO UI CMNotificationManager.mm/480:reposition floating views
2014-02-25 17:25:24.411 Lync[2099:3b71618c] INFO UI CMAlertViewController.mm/110:showalert is 1
2014-02-25 17:25:24.411 Lync[2099:3b71618c] INFO UI CMAlertViewController.mm/114:showalert is 0
2014-02-25 17:25:24.411 Lync[2099:3b71618c] INFO UI CMUIUtil.mm/410:Mapping error code = 0x22020001, context = , type = 201
2014-02-25 17:25:24.411 Lync[2099:3b71618c] INFO UI CMUIUtil.mm/1713:Mapped error message is 'We can’t connect to the server. Check your network connection and server address, and try again.
2014-02-25 17:25:24.411 Lync[2099:3b71618c] ERROR UI CMDismissButtonBaseViewController.mm/89:before: view height 45.000000, width 320.000000, x 0.000000, y 20.000000
2014-02-25 17:25:24.411 Lync[2099:3b71618c] INFO UI CMNotificationManager.mm/1088:viewFrame: origin x 0.000000, origin y 20.000000, height 45.000000, width 320.000000
2014-02-25 17:25:24.411 Lync[2099:3b71618c] INFO UI CMNotificationManager.mm/1194:resize alert label, origin x 44.000000, origin y 2.000000, height 41.000000, width 232.000000
2014-02-25 17:25:24.412 Lync[2099:3b71618c] ERROR UI CMDismissButtonBaseViewController.mm/104:after: self.label.frame height 41.000000, width 232.000000, x 44.000000, y 2.000000
2014-02-25 17:25:24.412 Lync[2099:734c000] ERROR TRANSPORT CHttpConnection.cpp/1024:Request Type = UcwaAutoDiscoveryRequest Error domain = kCFErrorDomainCFNetwork code = 0x2 ErrorDescription = The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.) ErrorFailureReason = ErrorRecoverySuggestion =
2014-02-25 17:25:24.412 Lync[2099:734c000] ERROR UTILITIES CHttpConnection.cpp/953:GetAddrInfo returned has error 0x1176b40
2014-02-25 17:25:24.412 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/477:Releasing stream 0x11f5650.
2014-02-25 17:25:24.412 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing stream 0x11f5650.
2014-02-25 17:25:24.412 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x22020001
2014-02-25 17:25:24.413 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The retry counter is: 0
2014-02-25 17:25:24.413 Lync[2099:734c000] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName ([email protected]) domain () username ([email protected]) password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2014-02-25 17:25:24.413 Lync[2099:734c000] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET https://lyncdiscoverinternal.alnuaimi-group.com/?sipuri=sip:[email protected]
Request Id: 0x5c65368
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2014-02-25 17:25:24.413 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/409:Allocating stream 0x11411a0 for url - https://lyncdiscoverinternal.alnuaimi-group.com/ with persistent id as 6
2014-02-25 17:25:24.414 Lync[2099:734c000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for url https://lyncdiscoverinternal.alnuaimi-group.com/?sipuri=sip:[email protected]. Sending over direct connection.
2014-02-25 17:25:24.415 Lync[2099:734c000] ERROR TRANSPORT CHttpConnection.cpp/1024:Request Type = UcwaAutoDiscoveryRequest Error domain = kCFErrorDomainCFNetwork code = 0x2 ErrorDescription = The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.) ErrorFailureReason = ErrorRecoverySuggestion =
2014-02-25 17:25:24.415 Lync[2099:734c000] ERROR UTILITIES CHttpConnection.cpp/953:GetAddrInfo returned has error 0x1176b40
2014-02-25 17:25:24.415 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/477:Releasing stream 0x1012760.
2014-02-25 17:25:24.415 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing stream 0x1012760.
2014-02-25 17:25:24.416 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x22020001
2014-02-25 17:25:24.416 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The retry counter is: 0
2014-02-25 17:25:24.416 Lync[2099:734c000] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName ([email protected]) domain () username ([email protected]) password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2014-02-25 17:25:24.416 Lync[2099:734c000] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET http://lyncdiscoverinternal.alnuaimi-group.com/
Request Id: 0x5cf9638
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2014-02-25 17:25:24.417 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/409:Allocating stream 0x11c2490 for url - http://lyncdiscoverinternal.alnuaimi-group.com/ with persistent id as 7
2014-02-25 17:25:24.417 Lync[2099:734c000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for url http://lyncdiscoverinternal.alnuaimi-group.com/. Sending over direct connection.
2014-02-25 17:25:24.417 Lync[2099:734c000] INFO TRANSPORT CHttpStreamPool.cpp/556:Not setting TLS as the url(http://lyncdiscoverinternal.alnuaimi-group.com/) is not https
2014-02-25 17:25:24.418 Lync[2099:734c000] ERROR TRANSPORT CHttpConnection.cpp/1024:Request Type = UcwaAutoDiscoveryRequest Error domain = kCFErrorDomainCFNetwork code = 0x2 ErrorDescription = The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.) ErrorFailureReason = ErrorRecoverySuggestion =
2014-02-25 17:25:24.418 Lync[2099:734c000] ERROR UTILITIES CHttpConnection.cpp/953:GetAddrInfo returned has error 0x1176b40
2014-02-25 17:25:24.418 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/477:Releasing stream 0x11411a0.
2014-02-25 17:25:24.418 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing stream 0x11411a0.
2014-02-25 17:25:24.418 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x22020001
2014-02-25 17:25:24.418 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The retry counter is: 1
2014-02-25 17:25:24.419 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x5c65368)
2014-02-25 17:25:24.419 Lync[2099:3b71618c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2014-02-25 17:25:24.419 Lync[2099:3b71618c] ERROR APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/325:Request failed. Error - E_ConnectionError (E2-2-1)
2014-02-25 17:25:24.419 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation completed with url = https://lyncdiscoverinternal.alnuaimi-group.com/?sipuri=sip:[email protected], userUrl = , status = E_ConnectionError (E2-2-1)
2014-02-25 17:25:24.419 Lync[2099:3b71618c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. GET-UnAuthenticatedGet(0x5c65368): E_ConnectionError (E2-2-1) (RemoteNetworkTemporaryError); Done with req.; Stopping resend timer
2014-02-25 17:25:24.420 Lync[2099:734c000] ERROR TRANSPORT CHttpConnection.cpp/1024:Request Type = UcwaAutoDiscoveryRequest Error domain = kCFErrorDomainCFNetwork code = 0x2 ErrorDescription = The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.) ErrorFailureReason = ErrorRecoverySuggestion =
2014-02-25 17:25:24.420 Lync[2099:734c000] ERROR UTILITIES CHttpConnection.cpp/953:GetAddrInfo returned has error 0x1176b40
2014-02-25 17:25:24.420 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/477:Releasing stream 0x11c2490.
2014-02-25 17:25:24.420 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing stream 0x11c2490.
2014-02-25 17:25:24.421 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x22020001
2014-02-25 17:25:24.421 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The retry counter is: 1
2014-02-25 17:25:24.421 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x5cf9638)
2014-02-25 17:25:24.421 Lync[2099:3b71618c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2014-02-25 17:25:24.421 Lync[2099:3b71618c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with url = http://lyncdiscoverinternal.alnuaimi-group.com/, Hops = 1, status = E_ConnectionError (E2-2-1)
2014-02-25 17:25:24.421 Lync[2099:3b71618c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. UrlTrustResolver(0x5cf9638): E_ConnectionError (E2-2-1) (RemoteNetworkTemporaryError); Done with req.; Stopping resend timer
2014-02-25 17:25:24.421 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/393:CUcwaAutoDiscoverGetUserUrlOperation::onEvent received. Status = E_ConnectionError (E2-2-1), url = http://lyncdiscoverinternal.alnuaimi-group.com/
2014-02-25 17:25:24.421 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation completed with url = http://lyncdiscoverinternal.alnuaimi-group.com/?sipuri=sip:[email protected], userUrl = , status = E_ConnectionError (E2-2-1)
2014-02-25 17:25:24.422 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1734:AutoDiscovery: Falling back to probing external urls
2014-02-25 17:25:24.422 Lync[2099:3b71618c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with url = https://lyncdiscover.alnuaimi-group.com/?sipuri=sip:[email protected], maxHops = 10
2014-02-25 17:25:24.422 Lync[2099:3b71618c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl called with url = https://lyncdiscover.alnuaimi-group.com/, hopCount = 0, maxHops = 10
2014-02-25 17:25:24.422 Lync[2099:3b71618c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with url = https://lyncdiscover.alnuaimi-group.com/, Hops = 0, status = S_OK (S0-0-0)
2014-02-25 17:25:24.422 Lync[2099:3b71618c] INFO TRANSPORT CTransportThread.cpp/131:Added Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2014-02-25 17:25:24.422 Lync[2099:3b71618c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. GET-UnAuthenticatedGet(0x5c65368)
2014-02-25 17:25:24.422 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1776:Successfully started the GetUserUrlOperation request for https://lyncdiscover.alnuaimi-group.com/?sipuri=sip:[email protected]
2014-02-25 17:25:24.422 Lync[2099:3b71618c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with url = http://lyncdiscover.alnuaimi-group.com/?sipuri=sip:[email protected], maxHops = 10
2014-02-25 17:25:24.423 Lync[2099:3b71618c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl called with url = http://lyncdiscover.alnuaimi-group.com/, hopCount = 0, maxHops = 10
2014-02-25 17:25:24.423 Lync[2099:3b71618c] INFO TRANSPORT CTransportThread.cpp/131:Added Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2014-02-25 17:25:24.423 Lync[2099:3b71618c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. UrlTrustResolver(0x10272b8)
2014-02-25 17:25:24.423 Lync[2099:734c000] INFO TRANSPORT CTransportThread.cpp/343:Sent Request(UcwaAutoDiscoveryRequest) to Request Processor
2014-02-25 17:25:24.423 Lync[2099:3b71618c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1812:Successfully started the GetUserUrlOperation request for http://lyncdiscover.alnuaimi-group.com/?sipuri=sip:[email protected]
2014-02-25 17:25:24.423 Lync[2099:734c000] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName ([email protected]) domain () username ([email protected]) password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2014-02-25 17:25:24.424 Lync[2099:734c000] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET https://lyncdiscover.alnuaimi-group.com/?sipuri=sip:[email protected]
Request Id: 0x5c65368
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2014-02-25 17:25:24.424 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/409:Allocating stream 0x10c5380 for url - https://lyncdiscover.alnuaimi-group.com/ with persistent id as 6
2014-02-25 17:25:24.424 Lync[2099:734c000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for url https://lyncdiscover.alnuaimi-group.com/?sipuri=sip:[email protected]. Sending over direct connection.
2014-02-25 17:25:24.425 Lync[2099:734c000] INFO TRANSPORT CTransportThread.cpp/343:Sent Request(UcwaAutoDiscoveryRequest) to Request Processor
2014-02-25 17:25:24.425 Lync[2099:734c000] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName ([email protected]) domain () username ([email protected]) password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2014-02-25 17:25:24.425 Lync[2099:734c000] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET http://lyncdiscover.alnuaimi-group.com/
Request Id: 0x10272b8
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2014-02-25 17:25:24.426 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/409:Allocating stream 0x5ce6d70 for url - http://lyncdiscover.alnuaimi-group.com/ with persistent id as 7
2014-02-25 17:25:24.426 Lync[2099:734c000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for url http://lyncdiscover.alnuaimi-group.com/. Sending over direct connection.
2014-02-25 17:25:24.426 Lync[2099:734c000] INFO TRANSPORT CHttpStreamPool.cpp/556:Not setting TLS as the url(http://lyncdiscover.alnuaimi-group.com/) is not https
2014-02-25 17:25:24.427 Lync[2099:734c000] ERROR TRANSPORT CHttpConnection.cpp/1024:Request Type = UcwaAutoDiscoveryRequest Error domain = kCFErrorDomainCFNetwork code = 0x2 ErrorDescription = The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.) ErrorFailureReason = ErrorRecoverySuggestion =
2014-02-25 17:25:24.427 Lync[2099:734c000] ERROR UTILITIES CHttpConnection.cpp/953:GetAddrInfo returned has error 0x1176b40
2014-02-25 17:25:24.427 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/477:Releasing stream 0x10c5380.
2014-02-25 17:25:24.427 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing stream 0x10c5380.
2014-02-25 17:25:24.428 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x22020001
2014-02-25 17:25:24.428 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The retry counter is: 0
2014-02-25 17:25:24.428 Lync[2099:734c000] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName ([email protected]) domain () username ([email protected]) password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2014-02-25 17:25:24.428 Lync[2099:734c000] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET https://lyncdiscover.alnuaimi-group.com/?sipuri=sip:[email protected]
Request Id: 0x5c65368
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2014-02-25 17:25:24.428 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/409:Allocating stream 0x1080a00 for url - https://lyncdiscover.alnuaimi-group.com/ with persistent id as 6
2014-02-25 17:25:24.429 Lync[2099:734c000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for url https://lyncdiscover.alnuaimi-group.com/?sipuri=sip:[email protected]. Sending over direct connection.
2014-02-25 17:25:24.429 Lync[2099:734c000] ERROR TRANSPORT CHttpConnection.cpp/1024:Request Type = UcwaAutoDiscoveryRequest Error domain = kCFErrorDomainCFNetwork code = 0x2 ErrorDescription = The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.) ErrorFailureReason = ErrorRecoverySuggestion =
2014-02-25 17:25:24.430 Lync[2099:734c000] ERROR UTILITIES CHttpConnection.cpp/953:GetAddrInfo returned has error 0x1176b40
2014-02-25 17:25:24.430 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/477:Releasing stream 0x5ce6d70.
2014-02-25 17:25:24.430 Lync[2099:734c000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing stream 0x5ce6d70.
2014-02-25 17:25:24.430 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x22020001
2014-02-25 17:25:24.430 Lync[2099:734c000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The retry counter is: 0
2014-02-25 17:25:24.430 Lync[2099:734c000] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName ([email protected]) domain () username ([email protected]) password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2014-02-25 17:25:24.431 Lync[2099:734c000] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET http://lyncdiscover.alnuaimi-group.com/
Request Id: 0x10272b8
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
Regards,
Sihanu NHi,
How did you set up Reverse Proxy (TMG, IIS ARR or others)?
Did you have single FE server or an FE pool? For a Front End pool the internal SIP pool FQDN must be different from the internal web services FQDN, because web traffic comes through the hardware load balancer and the internal
SIP pool traffic travels comes through the DNS load balancer.
You can troubleshooting with the help below:
1. Please browse the following URL:
http://lyncdiscover.contoso.com/autodiscover/autodiscoverservice.svc/root/domain
You should receive a prompt to open or save the domain file. The URL mentioned in the domain file must be the external web services URL for the Front End Server or Director pool. If the internal web services URL is returned, the web publishing rule
is incorrect.
2. Please try to browse the URL https://lyncexternal. contoso.com/mcx/mcxservice.svc/mex
You should see https://lyncexternal.contoso.com/Mcx/McxService.svc/WebTicket_Bearer in the browser or the XML SOAP information. This means the web services URL authentication setting is set to negotiate.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
side question: why no Lync 2013 dedicated forum in the options? not even in Office (365)?
We have several computers where the Lync 2013 goes to "not responding" every time you try to do something but also when you leave it alone (only program running according to task manager - just to check it is not crashing ...).
The first computers presenting the symptoms were Dell Precision M4500 laptops (8GB RAM) upgraded to Windows 8.1 several month before the issue started.
Lync started crashing on computer A in the days following a series of updates done on May 28th. Computer B (same hardware, same age) had been offline for a while, was updated on June 13th and Lync started crashing as well.
First suspect: one of the updates common to both computers at the time of the crash
- kb2768005 security update for MS Office 2013
- kb2878316 security update for MS Office 2013
- kb2768016 update for MS Office 2013
- kb2880462 update for MS Office 2013
- kb2726952 update for MS Publisher 2013
- kb2817301 update for MS Visio 2013
- kb2920189 security update fo MS Windows
- kb2926765 security update for MS Windows
- kb2931366 security update for MS Windows
- kb2956575 update for MS Windows
- kb2962140 update for MS Windows
- kb2965065 update for MS Windows
All "suspect" updates have been uninstalled one at a time except for kb2920189 "required by your computer, cannot be uninstalled (windows update standalone updater)" - no improvement
Suspect number two: Bluetooth >> try running Lync with the bluetooth off (and also the wi-fi off) - no improvement
Supsect number three: graphical adapter because the only error in event viewer is related to nvvsvc.exe >> update the driver software of NVIDIA Quadro FX880M - no improvement
At this point, Lync crashes also on computer C (Dell Precision M4400 laptop - 4GB RAM - NVIDIA Quadro FX1700M - no bluetooth).
Deleting the Outlook Profile, launching a repair of Office 2013 and restarting the computer makes no difference.
Tests all done with same user (working fine on other computers).
Any ideas ? THXThere are almost always a driver issue, but they're not always easy to fix. I'll often remove the brand-name drivers and let native Windows drivers take over to see if I can make it go away before trying to find the culprit.
You're on the right track though. Rather than uninstall, see if you can a similar model and update it until you can break it.
Also, this is the matching Lync 2013 forum you were looking for:
http://social.technet.microsoft.com/Forums/lync/en-US/home?forum=lyncprofile
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications -
Creating a Lync meeting not working in outlook 210 client
We use office 365 environment and pushed lync 2013 client to user who uses Outlook 2010 Client still. Anyway the default domain work address the user is able to go to calendar, click new meeting button and fill out the meeting email then click LYNC Meeting,
which works, but when he adds another domain email account in his outlook and tries doing that, he gets an error "The request failed. Please try again. Make sure that you are signed in to Microsoft Lync" in which he is signed in.
I deleted sip, reinstalled Lync 2013, redid the outlook profile, not sure what is triggering this. His other domain account uses Office 365.
Any ideas?
Best regards,<br/> <br/> <strong>Joe C<br/> </strong>Partner Online Technical Community<br/> -----------------------------------------------------------------------------------------<br/> We hope you get value from
our new forums platform! Tell us what you think:<br/> <a href="http://social.microsoft.com/Forums/en-US/partnerfdbk/threads"><span style="color:#0033cc">http://social.microsoft.com/Forums/en-US/partnerfdbk/threads<br/>
</span></a>------------------------------------------------------------------------------------------<br/> This posting is provided "AS IS" with no warranties, and confers no rights <hr>Correction:
The error happens when he sends a lync meeting to his own second domain or anyone within the domain.
So he has two email addresses in outlook
1 domain 1 (default) which he connects to Lync with this and this is our domain
2 domain 2 this is his other domain email address in which he added to Outlook.
So when he goes on domain 1 calendar and creates a meeting and licks on New Lync meeting to someone in Domain 2 that is when Outlook throws an error that he is not signed into Lync in which he is. It;s odd.
Sorry for the confusion.
Funny thing is when he removes Domain 2 email account, lync meetings work fine to send. So something with domain 2 email address added to his outlook is triggering this.
Best regards,<br/> <br/> <strong>Joe C<br/> </strong>Partner Online Technical Community<br/> -----------------------------------------------------------------------------------------<br/> We hope you get value
from our new forums platform! Tell us what you think:<br/> <a href="http://social.microsoft.com/Forums/en-US/partnerfdbk/threads"><span style="color:#0033cc">http://social.microsoft.com/Forums/en-US/partnerfdbk/threads<br/>
</span></a>------------------------------------------------------------------------------------------<br/> This posting is provided "AS IS" with no warranties, and confers no rights <hr> -
Lync 2013 not Updating folder with Outlook
Lync error that not update all folder as well as user having "hanging Status: not connected" but on workgroup machine status shows OK.
Connection Status:
DG URL Internal;https://VM106.domain.com.pk:443/groupexpansion/service.svc;--;
DG URL External;https://im.domain.com.pk:443/groupexpansion/service.svc;--;
Quality Metrics URI;sip:VM106.domain.com.pkdomain.com.pk;gruu;opaque=srvr:HomeServer:s34Ggo9qtFKMrBibQIzj0gAA;--;
ABS Server Internal URL;https://VM106.domain.com.pk:443/abs/handler;--;
ABS Server External URL;https://im.domain.com.pk:443/abs/handler;--;
Voice mail URI;;--;
Exum URL;;--;
MRAS Server;sip:VM122.domain.com.pkdomain.com.pk;gruu;opaque=srvr:MRAS:UzOAyE46oVSXugR2hrjPgAAA;Enabled;
GAL Status;https://VM106.domain.com.pk:443/abs/handler;--;
Focus Factory;sip:talha.malikdomain.com.pk;gruu;opaque=app:conf:focusfactory;--;
Line;;--;
Location Profile;DefaultProfile;--;
Call Park Server URI;sip:VM106.domain.com.pkdomain.com.pk;gruu;opaque=srvr:Microsoft.Rtc.Applications.Cps:HYueIR7pGFOx9hNeY2W6kAAA;--;
Server Address Internal;vm106.domain.com.pk;--;
Server Address External;im.domain.com.pk;--;
Server SIP URI;malikdomain.com.pk;--;
Exum Enabled;TRUE;--;
Controlled Phones;TRUE;--;
GAL or Server Based Search;GAL search;--;
PC to PC AV Encryption;AV Encryption Enforced;--;
Telephony Mode;Telephony Mode Disabled;--;
Line Configured From;Auto Line Configuration;--;
Configuration Mode;Auto Configuration;--;
EWS Internal URL;
EWS External URL;
SharePoint Search Center URL;;--;
Skill Search URL;;--;
Connected Lync Server;sip.domain.com.pk;--;
Local Log Folder;D:\Users\Administrator\AppData\Local\Microsoft\Office\15.0\Lync\Tracing;--;
Inside User Status;FALSE;--;
Contact List Provider;Lync Server;--;
Pairing State;Lync cannot connect to your desk phone because the USB cable is not plugged in. Make sure that you connect the cable.;Enabled;
UCS Connectivity State;Exchange connection Down;--;
MAPI Information;UCMAPI is connected to Outlook, but one or more folders are not updating.;MAPI unavailable;
EWS Information;;EWS not deployed;
License State;Lync Basic;--;
Hanging Notification Status;;disconnect;
pChat Room Mgmt Int URL;https://VM106.domain.com.pk:443/PersistentChat/RM;--;
pChat Room Mgmt Ext URL;https://im.domain.com.pk:443/PersistentChat/RM;--;
pChat URIs;sip:GC-1-PersistentChatService-4domain.com.pk;--;
pChat Default URI;sip:GC-1-PersistentChatService-4domain.com.pk;--;
pChat Enabled?;TRUE;--;
and user connected lync and outlook from workgroup machine having subjected status.
DG URL Internal;https://VM106.domain.com.pk:443/groupexpansion/service.svc;--;
DG URL External;https://im.domain.com.pk:443/groupexpansion/service.svc;--;
Quality Metrics URI;sip:VM106.domain.com.pkdomain.com.pk;gruu;opaque=srvr:HomeServer:s34Ggo9qtFKMrBibQIzj0gAA;--;
ABS Server Internal URL;https://VM106.domain.com.pk:443/abs/handler;--;
ABS Server External URL;https://im.domain.com.pk:443/abs/handler;--;
Voice mail URI;;--;
Exum URL;;--;
MRAS Server;sip:VM122.domain.com.pkdomain.com.pk;gruu;opaque=srvr:MRAS:UzOAyE46oVSXugR2hrjPgAAA;Enabled;
GAL Status;https://VM106.domain.com.pk:443/abs/handler;--;
Focus Factory;sip:talha.malikdomain.com.pk;gruu;opaque=app:conf:focusfactory;--;
Line;;--;
Location Profile;DefaultProfile;--;
Call Park Server URI;sip:VM106.domain.com.pkdomain.com.pk;gruu;opaque=srvr:Microsoft.Rtc.Applications.Cps:HYueIR7pGFOx9hNeY2W6kAAA;--;
Server Address Internal;vm106.domain.com.pk;--;
Server Address External;im.domain.com.pk;--;
Server SIP URI;talha.malikdomain.com.pk;--;
Exum Enabled;TRUE;--;
Controlled Phones;TRUE;--;
GAL or Server Based Search;GAL search;--;
PC to PC AV Encryption;AV Encryption Enforced;--;
Telephony Mode;Telephony Mode Disabled;--;
Line Configured From;Auto Line Configuration;--;
Configuration Mode;Auto Configuration;--;
EWS Internal URL;https://email.domain.com.pk/EWS/Exchange.asmx;--;
EWS External URL;https://email.domain.com.pk/ews/exchange.asmx;--;
SharePoint Search Center URL;;--;
Skill Search URL;;--;
Connected Lync Server;sip.domain.com.pk;--;
Local Log Folder;D:\Users\Administrator\AppData\Local\Microsoft\Office\15.0\Lync\Tracing;--;
Inside User Status;FALSE;--;
Contact List Provider;Lync Server;--;
Pairing State;Lync cannot connect to your desk phone because the USB cable is not plugged in. Make sure that you connect the cable.;Enabled;
UCS Connectivity State;Exchange connection Down;--;
MAPI Information;UCMAPI is connected to Outlook, but one or more folders are not updating.;MAPI unavailable;
EWS Information;;EWS Status OK;
License State;Lync Basic;--;
Hanging Notification Status;;Connected;
pChat Room Mgmt Int URL;https://VM106.domain.com.pk:443/PersistentChat/RM;--;
pChat Room Mgmt Ext URL;https://im.domain.com.pk:443/PersistentChat/RM;--;
pChat URIs;sip:GC-1-PersistentChatService-4domain.com.pk;--;
pChat Default URI;sip:GC-1-PersistentChatService-4domain.com.pk;--;
pChat Enabled?;TRUE;--;
Facing error on all users profile as i have two SMTP address @domainX.com.pk and @domainY.com.pk and i have change default smtp but error still same.
Apart from this when i check my outlook conversion folder is up to date and updated.
Talha Faraz MalikHi,
If you change the SMTP account same with SIP account, please try to delete Lync user profile and restart Lync, Outlook client to test again.
If you want to use different SMTP account with Lync account, you can also try to change Lync client policy, change the parameter DisableEmailComparisionCheck to True.
More details:
http://www.lync.geek.nz/2014/04/lync-2013-exchange-integration.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Outlook Social Connector 2013 not working for linkedin
Hi
Outlook Social Connector 2013 is not able to connect to linkedin
When using Social Network Accounts in Outlook 2013, tick linkedin, the entry of username/password immediately after hitting connect is showing "invalid username or password".
Appears like it never really checked with the account.
And
No, there's in no strange signs/keys used in the password
Yes, it's working from web entry
Yes, it's working when using Windows Mail (win 8) linking it to my Hotmail account from same PC
No, the Antivirus is not the issue, same with or without
Yes, only one profile is used in Outlook 2013
Yes, have tried to re-installed Office 2013
Yes, my linked in profile is set to allow 3rd party applications to connect
Yes I have tried another social network (Facebook) at this one is working
And finally, yes I have looked at other treads in outlook forum, here, and "google" around for a day.
Conclusion, the outlook 2013 addin is in some degree working, i'm very far from the only one with the issue, and no-one seems to have an idea what's really blocking for accessing the linkedin social networks from Outlook 2013, and a solution other than standard
suggestions to try to re-install and set it up from scratch again. Not working...tried that.
Any suggestions / ideas ?Hi
Outlook Social Connector 2013 is not able to connect to linkedin
When using Social Network Accounts in Outlook 2013, tick linkedin, the entry of username/password immediately after hitting connect is showing "invalid username or password".
Appears like it never really checked with the account.
And
No, there's in no strange signs/keys used in the password
Yes, it's working from web entry
Yes, it's working when using Windows Mail (win 8) linking it to my Hotmail account from same PC
No, the Antivirus is not the issue, same with or without
Yes, only one profile is used in Outlook 2013
Yes, have tried to re-installed Office 2013
Yes, my linked in profile is set to allow 3rd party applications to connect
Yes I have tried another social network (Facebook) at this one is working
And finally, yes I have looked at other treads in outlook forum, here, and "google" around for a day.
Conclusion, the outlook 2013 addin is in some degree working, i'm very far from the only one with the issue, and no-one seems to have an idea what's really blocking for accessing the linkedin social networks from Outlook 2013, and a solution other than standard
suggestions to try to re-install and set it up from scratch again. Not working...tried that.
Any suggestions / ideas ?
I have the same problem .... I used it for a while without any problems. From a few days is this no longer works for linkedin...
Boskaz Design -
MDT 2013 not working with older systems
We have been using MDT 2012 with no issues on any of our Dell systems. I just upgraded our Test Bed to MDT 2013 along with ADK for Windows 8.1. After upgrading and getting the new WIM files created, it does not work on two of our model systems. It gives
the message listed below when trying to boot into the WIM. These two systems are Dell Precision Workstations 370 and 380, both 64-bit Pentium 4 machines. It works great on all of our other system models. I checked the Execute Disable and it is enabled, but
neither model has virtualization. Does not having virtualization and UEFI play a factor? Thanks.
Your PC needs to restart.
Please hold down the power button.
Error Code: 0x0000005D
Parameters:
0x03060F06
0x756E6547
0x49656E69
0x6C65746E
MickKnown issue:
http://social.technet.microsoft.com/Forums/en-US/387b31cc-66d8-46c6-aae9-fb1e527ba72a/windows-7-image-deployment-failed-in-hp-model-d530-using-mdt-2012-and-adk-80?forum=mdt
1) Upgrade your machines with modern processors that support the ADK.
or
2) Downgrade to the WAIK
http://www.microsoft.com/en-us/download/details.aspx?id=5753 and stick with Windows 7.
Keith Garner - keithga.wordpress.com -
Hey kids!
The Computer: Toshiba Satellite A355D-S69221
The Program: 32 Bit Windows Vista
The issue: Internal Mic not recognized, external mic quits midway through conversation, Realtek Digital output not plugged in.
So being the smart guy I am, a few weeks back I decided to do the smart thing and delete all the speech recognition software off this thing. I don't need it, so wth.
Now, my internal mic quit. I reinstalled the software, rolled back drivers, deleted drivers to rebuild the driver stack, did a BIOS update, did the GTA ViceCity cheatcode start (unplug everything hold power key 30 seconds, reboot, f2 to enter bios, f9 to update, f10 to save), and nothing.
I did notice that when I had the Realtek Digital Output set as standard, my mic jack was illuminated by a red LED, and the Realtek HD manager wouldn't pop up when I plug something in.
The last irritating part is that I will talk to my wife via vo/ip, the external mic I am using will just quit mid conversation, and I have to reload a driver to get it to work again. I am at my wit's end with this thing, can anyone help? The last thing I am goign to do is another system restore from an earlier date than I used before. Does anyone have any other hints/clues/ideas?
KFDThanks Jeff. No this isn't some kind of emergency so no one really minds my tinkering until it does get back up.
OK, I got it now. This is what my cyrus.conf looks like. It doesn't look like there's anything wrong with it...
# standard standalone server implementation
START {
# do not delete this entry!
recover cmd="ctl_cyrusdb -r"
# this is only necessary if using idled for IMAP IDLE
# idled cmd="idled"
# UNIX sockets start with a slash and are put into /var/imap/socket
SERVICES {
# add or remove based on preferences
imap cmd="imapd" listen="imap" prefork=0
imaps cmd="imapd -s" listen="imaps" prefork=0
pop3 cmd="pop3d" listen="pop3" prefork=0
pop3s cmd="pop3d -s" listen="pop3s" prefork=0
sieve cmd="timsieved" listen="sieve" prefork=0
# at least one LMTP is required for delivery
lmtp cmd="lmtpd" listen="lmtp" prefork=0
lmtpunix cmd="lmtpd" listen="/var/imap/socket/lmtp" prefork=0
# this is only necessary if using notifications
# notify cmd="notifyd" listen="/var/imap/socket/notify" proto="udp" prefork=1
EVENTS {
# this is required
checkpoint cmd="ctl_cyrusdb -c" period=30
# this is only necessary if using duplicate delivery suppression
delprune cmd="ctl_deliver -E 3" at=0400
# this is only necessary if caching TLS sessions
tlsprune cmd="tls_prune" at=0400
LIMITS {
imaplimit value=0
But yet it insists with the message: relay=cyrus, delay=239180, status=deferred (temporary failure. Command output: couldn't connect to lmtpd: No such file or directory_ 421 4.3.0 deliver: couldn't connect to lmtpd_ )
when I try to send a message through the server. Could this be a permissions thing? I've fixed the permissions a lot of times and nothing seems to get changed...
Again, thanks for everyone's help. I'm sure this is something dumb that I'm just missing but since I'm not familiar enough with the system it's hard for me to figure out what that is!
Maybe you are looking for
-
App Store won't open, error message "App Store can not be opened because of a problem". I haven't been able to update anything for a week or so. I have used Disk Utility, Drive Genius, deleting the .plist, all to no avail. My Mac Mail hasn't worke
-
Delete Allowed Property For Current Record
I have a requirement where I need to make a record allowed proeprty delete_allowed as false. Eg: If :variable:='YES' then SET_ITEM_INSTANCE_PROPERTY('block_name.item',CURRENT_RECORD,UPDATE_ALLOWED,PROPERTY_FALSE); end if; I cannot set delete_allowed
-
Script out SSIS packages from SSISDB using powershell
Hi, I was able to script out the packages that are on msdb but I was unable to script out that are in Integration services catalog. Does anyone has any idea on how to do this???? Is this possible at all??? Thanks in advance....
-
Good day I need to add the following the columns to my script but I dont know how to GRV date, GRV number and Payment date SELECT poh.segment1 po_number, porh.segment1 iproc_number, porl.line_num, TRUNC (porh.creation_date) "IPROC Creation_date", TRU
-
When i want look a video on Youtube, it's impossible. I have a message "echec du module" can you help me please ?