Lync 2013 problem with interaction in Hyper-V

Hello,
during the conference in Lync 2013 does
not work the guest interaction service,
which has been referred to the control
(display the
desktop). The
guest can move the
cursor, but
can't click or
write in Hyper-V virtual
machine. In
a virtual machine running Windows Server 2012R2. Enhanced VM Interaction is
on.
What to do to give away full
control for the guest?

I may be confused, but it looks like you're trying to control a server VM with this capability. Do the actions require elevated or administrator access? If so, by security design this won't work.
"It is worthwhile mentioning that people who you gave control to in a desktop sharing session will not be able to interact with elevated prompts."
The article below mentions this, and suggests running as Lync as administrator which we've not had great success with.
http://blogs.technet.com/b/lync/archive/2012/11/02/presenting-your-screen-in-lync-2013.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Similar Messages

Lync 2013 compatibility with Application sharing

Just upgraded to Lync 2013, and I found a compatibility issue with StarTech Stream capture software when attepting to share the application in a meeting.
The Hardware device that Stream Capture uses is:
www.startech.com/AV/Converters/Video/PCI-Express-HD-Video-Capture-Card-1080p-HDMI-DVI-VGA-Component~PEXHDCAP
The software can be downloaded: http://sgcdn.startech.com/005329/media/sets/Stream_Catcher/Capture_Software.zip
The issue I notice is when streaming just the program through Lync 2013. The mouse pointer will disappear over any Lync screen.
To duplicate the issue start a lync meeting, share the stream capture software.   Minimize the software, and wait 30 seconds so the app doesn't detect activity.   Then when you try to click on the "Stop Presenting" button within
Lync   The mouse will disappear.   Also, noticed similar behavior with other parts of Lync.
The program works as expected when sharing the full desktop.
Upon contacting Startech support they said that the issue may be related to how Lync 2013 uses "Active Video Content".   Problem didn't occur in Lync 2010.
I also tried updating to most recent video driver, disabled hardware acceleration but this did not help.
Any configuration settings I can change in Lync 2013 to get around this behavior?

Hi rainmakers,
I suggest you consult Microsoft for dedicated support.
You can click the “Give Feedback” button in the bottom-right of Lync 2013 to report the issue.
Best regards,
Eric

Problem with interactive alv

hai ,
    I have problem with my interactive alv ,
when i double click the line item the same line item is displaying for all the selections ..
LASS lcl_event_handler IMPLEMENTATION.
METHOD on_double_click.
find out selected line (double click)
    READ TABLE i_fd INTO w_fd INDEX e_row-index.
    IF sy-subrc NE 0.
      MESSAGE i075(bc412). " <-- internal error
      EXIT.
    ENDIF.
    "CLEAR i_popup.
    LOOP AT i_trdt INTO w_trdt WHERE deal_number = w_fd-rfha .
     IF sy-tabix GT 1.
       CLEAR w_trdt-deal_number.
     ENDIF.
      APPEND w_trdt TO i_popup.
    ENDLOOP.
    CLEAR : w_fd , w_trdt .
    IF i_popup IS NOT INITIAL .
      CREATE OBJECT ref_container
       EXPORTING
   parent                      =
         container_name               = 'CONTAINER1'
   style                       =
   lifetime                    = lifetime_default
   repid                       =
   dynnr                       =
   no_autodef_progid_dynnr     =
EXCEPTIONS
   cntl_error                  = 1
   cntl_system_error           = 2
   create_error                = 3
   lifetime_error              = 4
   lifetime_dynpro_dynpro_link = 5
   others                      = 6
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      CREATE OBJECT ref_alv
        EXPORTING
   i_shellstyle      = 0
   i_lifetime        =
          i_parent          = ref_container
   i_appl_events     = space
   i_parentdbg       =
   i_applogparent    =
   i_graphicsparent =
   i_name            =
   i_fcat_complete   = space
        EXCEPTIONS
          error_cntl_create = 1
          error_cntl_init   = 2
          error_cntl_link   = 3
          error_dp_create   = 4
          OTHERS            = 5
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      PERFORM form_layout.
      PERFORM f_cat.
      CALL METHOD ref_alv->refresh_table_display.
     CALL METHOD g_alv->refresh_table_display.
    ENDIF.
   CALL METHOD g_alv->refresh_table_display.
CLEAR i_popup.
ENDMETHOD.                     "on_double_click
ENDCLASS.                    "lcl_event_handler IMPLE
Regards,
K,Vinay Kumar

Hi,
Try..
READ TABLE i_fd INTO w_fd INDEX es_row_no-index.
Hope it helps you.
Murthy

Problem with interactive booklet

i just bought B'Day, by Beyonce, whihc comes with an interactive booklet. i double click on it and nothing happens.... i tried to open it in Quicktime and RealPlayer but it wouldn't work
how does a digital booklet work?
does anyone know why this is happening?

I'm having the same problem. I sent them an e-mail last night and got some delusional response that had nothing to do with my question. I specifically asked about the "B'Day" interactive booklet and said it wouldn't work and all they said was you've downloaded "B'Day" already. I sent them a second e-mail, but I haven't heard back yet.
I'm also having a problem with my "Idlewild" interactive booklet. I can't get it to expand into a larger window. It's only done it once.
The whole interactive booklet thing seems like a complete mess. Not to mention they have 2 of the same version of "B'Day" on iTunes if you click on her name. I'm wondering if one version had the actual booklet and the other didn't. There was an incident with Danity Kane's album on release day also. They had two versions at first, one with a video and one without. But both were the same price. They eventually got rid of the one that didn't include the video. I knew it was an error. But I'm wondering if the same thing happened here.

Problem with Interactive forms. Non interactive works fine

I have a strange problem with testing interactive forms . If i test the same test form (FP_TEST_02) without putting an x in the fillable field, i see the PDF fine.
But when I set the fillable filed to x I get a system error and the J2ee error log as follows :
#ADSUSER#41#SAP J2EE Engine JTA Transaction : [412ffffffb2ffffffaa00079]#hostx.domainy.nl_EP1_68334250#ADSUSER#ddcd65206da111dcb70e129e934ec971#SAPEngine_Application_Thread[impl:3]_21##0#0#Fatal##Plain###Client: 055 SystemId: P30 AppName: SAFP
Processing exception during a "UsageRights" operation.
Request start time: Fri Sep 28 10:04:49 GMT+01:00 2007
com.adobe.ProcessingError: Invalid usage right: EmbedFileRights value: Create
I do not understand why. I have added the credetial file for user right "ReaderRights", but this message idicates soemthing with "Create". What am I missing.
(all test reports for the ADS connetions etc work fine, just interactive forms gives this error)
Any help would be greatly appreciated.
Message was edited by:
glenn venghaus

Interesting. I might have a problem like you mentioned.
I am running one SRM50 system (abap+java) and one ECC6.0 (abap)
I want to use ADS from both ABAP stacks. I have configured both and the ADS including interactive forms works from the SRM5 abap system, but has the problems described from the ECC6.0 system.
The abap software components from both systems differ. The working one has aba, basis, apl on level 8, the non woking on 12.
Now which of the abap components is involved and would the older level 8 componenet work with the newer ADS (is it downward compatible). Since I could upgrade the java ADS to the latest level , but do not want to upgrade the abap stack on the SRM5 system.
I am afraid of breaking a working SRM 5 system.

Macbook Pro late 2013 - problem with login screen resolution

Hi,
I've got problem with login screen resolution, after upgrade to Yosemite. I use the 4rd resolution (last one) on my Mac Pro (late 2013), and after restart login screen is always on optimum mode... But it's only about the login screen.
Do you know how can I fix it? I would like to have the same resolution on every screen.
thx in advance

I Reformatted the CF card on the new computer   it works fine now on the new Mac Pro
Interesting point about the low power of the usb ports   I had to deal with all devices ejecting them selves when the mac pro was idle or slept Drobo needed a Firmware update and another drives needed me to change the sleep setting or the Mac Pro   to never and i also had to deploy a script to write to each device ever minute,   this kind of sold the problem with external Hard drives.   I wonder if the lowering power to a CF card   can eject it in a manor which would make the computer think it is corrupt.
I have looked at buying a power usb Hub    but seems only one or two of the ports are powered.
Seems to be a bit problem with the mac pro especially as everything has to be connected externally
Will assume the Firewire Connector does not work.

How to connect Lync 2013 client with OCS 2007 R2 Edge server

Hi,
We have OCS 2007 R2 Edge server for external & OCS 2007 R2 FE Server for internal access in our environment.
We able to access internally Lync2013 clients with OCS 2007R2 server, however from external we cannot access Lync2013 client with OCS2007 R2 server.
Is there any patch or registry key trick to access OCS from lync2013 client externally? We cannot immediately migrate to Lync2013 server from OCS.
Any help
MD

Hi,
I suggest you still use OCS 2007 R2 client to login OCS 2007 R2 Server untill finishing migration to Lync Server 2013, as using Lync client with OCS 2007 R2 Server will offer a pretty limited experience.
Here is a great blog about Lync 2010 Client unsupported with OCS, it is for Lync 2010 client but similar for Lync 2013 client:
http://blog.schertz.name/2010/09/lync-client-unsupported-ocs/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Lync 2013 design with minimum resources

Let me give one example and ask.
For 1000 users , Lync 2013, only IM/presence, Audio/Video etc., High availability needed, DR needed.
Plan to have 2 FE servers in DC and 1 FE in DR, all 3 FE are part of one pool. How is this idea? Will FE server in DR require license as it is in passive mode?
OR
2 FE servers in DC and 1 FE in DR , both are in different pool, I understand MS does not recommend to have 2 FE , it should be at least 3 but there are cases where it can be done. Hows this idea?
Which option is better and cost effective?
1 SQL , 1 SQL witness in DC and 1 SQL in DR , these are mirrored , is there any drawback of this?
2 Edge in DC , 1 Edge in DR in different pool OR 1 Edge in DC and 1 Edge in DR in same pool. Which one is better and possible way?

1) Stretching a pool across geographic areas isn't supported anymore. You'd need 20ms latency and a 1 Gbps connection in the Lync 2010 days.
http://technet.microsoft.com/en-us/library/gg679096(v=ocs.14).aspx
Yes the DR server would require a license, there is no passive in the pool.
The second option with separate pools (configured as paired pools) is the best option.
1) The drawback is that if your DC is down, your SQL won't automatically fail over because your primary and witness are both down. You need to make sure you'd have a sufficient pipe for this mirroring.
2) The edges in the same pool but geo-dispersed would be OK, but without intelligent DNS LB or HLB you'd get traffic coming in/out of both pipes which might be an inefficient or expensive route. The separate pools from DC and DR are fine
too, but would require a bit of manual intervention in a failure. The answer depends on what you need to accomplish and what kind of uptime you're promising.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Lync 2013 Authenticating with Windows Account Every Minute

Seeing a strange issue with Lync 2013 client logging into my Windows Account about every 1-2 minutes. We are using Lync Server 2013 (on-premise) so it makes no sense that it is logging into and authenticating against Windows Account. This was causing major
issues as my Windows Account password was different than my company domain login. This was causing Lync to use the "wrong" password to login into Windows Account. I changed the passwords to match and now still seeing Lync logging in constantly
into Windows Account.
This is adding up to a LOT of data traffic. Lync should NOT be authenticating every 1-2 minutes into my Windows (Live) Account. Help please!

Hi,
Did the issue happen only for you or for multiple users?
Please exist Lync client, delete user profile on local computer with the following path, then restart Lync client:
%UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Lync 2013 federation with Skype error: 'Reference error id 504 (Source ID 239)

I have setup lync 2013, configured skype federation (http://www.techtroubleshoot.com/federate-lync-server-with-skype/) and also done Lync provisioning. Skype federation worked for a few days (2weeks) and then stopped. Currently I am getting the following
error 'Reference error id 504 (Source ID 239)'.
Ports are open on the firewall. I however still get the error.
KimaniBob

Verify from following:
you can telnet to your sip domain on port 5061 and 443 from external and resolve of nslookup to srv record of sipfederation is correct.
Certificate on Edge Server not expire or damaged.
This link had similar issue, you can check it.
http://terenceluk.blogspot.com/2013/04/unable-to-send-instant-messages-or-view.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Lync 2013 Intergration with Siemens HiPath 4000 and HiPath 3500

Dear All,
We have implemented Lync 2013 with 2 FE , 1 PChat , 1 OWA and 2 Edge Server (DNS Load Balancing with NAT) , we are now in the next phase where we need to provide complete voice integration,
The customer is currently using Siemens HiPath 4000 at main office and Siemens HiPath 3800 and HiPath 3500 at the Branch offices,
Our scope is as under,
1) As first part intergrade the we have to integrate it with Siemens HiPath 4000 , with below features,
a) Lync User ability to dial via the PRI Lines
b) Lync User to receive Calls made to their Siemens extension on Lync Client ( Simultaneous ringing or enabling mobility (Similar to Cisco Mobility- When DID calls come they ring both on physical phone and Lync Client)
c) Features Such as Call forwarding , Hunt Groups , Integrated Exchange 2010 UM support ,
Finally Since we need to phase out Siemens we would have SBC 2000 gateway
We have 5 PRI lines going to Siemens HiPath , post this we would transfer one of the lesser used PRI to SBC 2000 , while maintaining complete functionality,
A similar setup would also be done at the Branch Office , except that we would be having SBC 1000 at one of the branch offices and Sangoma Lync Express at the other Branch Offices,
What we need ,
1) Design related suggestions
2) Implementation related challenges and hurdles
3) Dos and Donts , we do not want to over commit the client and then regret,
4) Any kind of Guide and similar scenarios implemented by other , step by step documents,
5) Best Practices , limitations and things to avoid, Suggestions
Thanks and Regards,
Hasan Reza

Dear All ,
I am sure all you guys who have advised me are much more experienced and have a better understanding of Voice,
I would like to rest my solution based on below design , before I submit the same to the customer, Need one final check list , Pls advise / confirm ,
Also please help me with the pre-requisites that I need to go to client with ? If there is something missing pls highlight
Looking at the changed design ,
Here is call flow
1) Calls comes via ---> PRI to Siemens HiPath
2) Hipath locally routes the call if the Extension is present in the Local System
3) If not then call is sent to Sip Trunk that would be accepted by the Sonus 2000
4) Sonus would then forward to the call to Lync 2013
5) Lync 2013 establishes the call with Lync Client
In this scenario , what would be the impact on below
0) Can we have same series of extension , for example (4001, 4002 , 4003 on traditional PABX , and have 4101,4102,4103 on Lync 2013)
1) Conference calls between Lync and Traditional PABX Systems
2) Currently all the Extension are configured with DID nos , any out going calls has the users DID no , after a user is moved to Lync 2013 , then the DID number associated with user , how would that behave ?
3) Can from a I transfer a user and his/her PRI to Sonus, or I should transfer the entire PRI Bunch,
4) Will there be an impact on caller ID , MOH (Music on Hold) , Hunt groups,
5) Will the same concept be used for Branch Offices as well ?
Please pardon my queries but if the above are made clear I am sure many people would benefit from this blog.
Thanks and Regards,
Hasan Reza

Lync 2013 integration with OWA

Hi,
I am integrating Lync 2013 ( with SBAs as branches) with OWA 2010.
The IM and presence works fine for users homed in the front end pool. However for users in the branch pool it does not work as the certificate is rejected by the CAS server.
SBA uses same server authentication certificate ( OAuth) as the front end. ( which I believe is expected)
Below is the error msg im seeing :
brief error logs:
================
TL_WARN(TF_PROTOCOL) [<SBA>\<SBA>]0704.11F0::06/04/2014-04:45:05.129.00001662 (UserServices,CRegister::OnClientDisconnected:register.cpp(1130)) ( 0000000002AACC20 ) Disconnecting client [[email protected]]/EndpointId
[a9cf0cb1-b611-50ae-8652-3cab8a0c8056] as it has crashed
TL_ERROR(TF_CONNECTION) [<SBA>\<SBA>]0704.11F0::06/04/2014-04:45:05.129.00001663 (SIPStack,SIPAdminLog::WriteConnectionEvent:SIPAdminLog.cpp(460)) [4230621814] $$begin_record
Severity: error
Text: The connection was closed before TLS negotiation completed. Did the remote peer accept our certificate?
Local-IP: <SBA ip>:62858
Peer-IP: <CAS server ip>:5075
Connection-ID: 0x1FEB401
Transport: TLS
$$end_record

Similar issue here...users homed on the SBAs can only see each other in OWA...users homed in other pools show gray presence indicators.

Lync 2013 integration with Avaya Aura Session Manager 6.3

Dear All,
we are planning to integrate Lync 2013 with Avaya Aura Session Manager 6.3 and Avaya
Communication Server 6.3.1 for one of our client.
As per the technical documentation from MS, it shows the integration with lync 2013 with Avaya aura session manager
6.3 and Communication Server 1000 (CS1K).
Please let me know is there any difference between Communication Server
1000 (CS1K) and Avaya Communication Server 6.3.1.

Hi,
From the link below of “Infrastructure qualified for Microsoft Lync”: Aura Session Manager 6.3 is supported with Lync Server 2013.
https://technet.microsoft.com/en-us/office/dn788945
Configuration Notes:
1.Media Bypass, RTCP, and History-Info were set to Enabled.
2.REFER and Session Timer were set to Disabled.
Known Limitations:
1.With Media bypass enabled in Lync, for an incoming call to Lync client that has simultaneous ring to a number with early media enabled, caller will hear ring back instead of the early media.
2.Avaya Aura communication manager does not send disconnect to PSTN via ISDN trunk while receiving SIP 603 response from Mediation server for incoming call to Lync client. Caller will hear overflow tone and call will not disconnect until caller drops the
call.
What’s more, it is better to contact IP-PBX vendor for the installation and set up as they have the complete documentation.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

Lync 2013 integration with Avaya Communication Manager Version 5.2 and Avaya Session Manager 6.3

Hi Team,
I have a situation, We have done integration between Avaya Communication Manager Version 5.2, Avaya Session Manager 6.3 and Lync 2013.
I’m able to make lync to lync call via extension number but not lync to avaya extension vice versa and lync to mobile calls. Will appreciate your help.
A PBX gateway has been marked as less-preferred.
Gateway name: sm.contoso.com
Response Code: 400
Consecutive Failure occurrences: 29
Cause: The gateway responded with the same failure response multiple consecutive times and is being marked as less-preferred.
Resolution:
Verify that the gateway is functioning correctly.

Did you add Avaya Session Manager as a PSTN gateway in Lync Topology?
Did you create dial plan and related normalization rule for extension in Avaya telephone system.
Which guide did you use to integrate Avaya Aura Session Manager with Lync Server?
You can check the following deployment guide:
http://www.microsoft.com/en-hk/download/details.aspx?id=41152
Lisa Zheng
TechNet Community Support

Does Lync 2013 work with SQL 2012 always on Feature?

Howdy,
I'm not that even "ok" when it come to SQL :)
so my question Does Lync 2013 Enterprise work with SQL 2012 "Always on" Feature or only Mirroring?
Regards,
T

It will not be supported. Mirroring is your only option.
If a post is helpful, please take a second to hit the green arrow on the left, or mark as answer, thanks.
Jean-Philippe Breton | Senior Microsoft Consultant | MCTS, MCITP, MCT, Lync MVP

Lync 2013 problem with interaction in Hyper-V

Similar Messages

Maybe you are looking for