Lync 2013 "Setup can't find or validate an installation file...."

Enterprise client installation.
We're running Windows 7 32bit SP2, Office 2010 32bit SP2.
Attempting to run the install for Lync 2013 (32-bit) on a test system and get the following warning immediately:
"Setup can't find or validate an installation file. Please try installing Office from your installation source, or if you installed from a downloaded package, please re-download and re-install....."
The source Lync 2013 file is direct from MVLS.
Any reason why this install from MVLS refuses to run from the source? Obviously, Lync 2013 wasn't included with Office 2010, so re-installing Office won't resolve this issue.
Any help is appreciated.

Hi,
It may also cause by the issue of the conflict with other software, please use clean boot to test the issue. In this mode install Lync 2013 file again.
You can refer to the link of “How to perform a clean boot in Windows”:
http://support.microsoft.com/kb/929135
If the issue persists, please also try to download Lync 2013 file and install again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Messages

Cannot install Office 2013 - Seup cannot find or validate an installation file

I downloaded the trial version of Office 2013 to evaluate it, but was unable to install it because I kept getting the following error...
Setup cannot find or validate an installation file. Please try reinstalling office from your installation source or if you installed from a downloaded package, please re-download and reinstall. If you continue to haVe problems
contact Microsoft or your system administrator.
I tried re-downloading the program - again I was met with the same problem. I tried running the setup file as administrator - problem remained. I tried copying the program to the hard drive and running it from there as the administrator - problem
remained. I downloaded Microsoft fixit tool for problem installations and ran that - that was no use either. The error message just kept coming back again.
I am assuming the setup file is corrupted in some way but seem unable to get an alternative setup file that will actually INSTALL. Or is there something so blatantly obvious going on that I'm missing it?
Help please!

I deployed Office 2k13 to client machine via SCCM 2012 R2. It did that flawlessly but I got the same error after trying to uninstall Office 2k13.
setup.exe /uninstall ProPlus /config .\ProPlus.ww\Uninstall.xml
Uninstall.xml file:
<Configuration Product=”ProPlus”>
<Display Level=”basic” CompletionNotice=”yes” SuppressModal=”yes” AcceptEula=”yes” />
</Configuration>
I can uninstall Office 2k13 manually by running setup.exe and following wizard but it is not automatic process so it sucks.
I've responded in your other thread:
https://social.technet.microsoft.com/Forums/en-US/fd735611-95bf-46f6-8add-2229a52e3e93/i-can-not-uninstall-office-2013-from-command-line?forum=officeitpro
Hi, your command-line is not valid - you are using a "relative" path for the <config.xml> and that is not supported..
http://technet.microsoft.com/en-us/library/cc178956(v=office.15).aspx#BKMK_config
Note: You must use a fully qualified path. Setup does not recognize relative paths with /config.
Instead, I suggest that you copy your "Uninstall.xml" file to the same folder where setup.exe exists, then, adjust your command-line like this:
setup /uninstall ProPlus /config Uninstall.xml
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Where can I find ODI 11g client installation files ?

Hello All,
I am new to ODI... I have recently installed ODI 11.1.1.6.0 in OEL5 and want to know where to find the client installation software?
I tried to search in google and in oracle downloads but i couldn't find client installation files at all?
Thanks
Kanna

In the selection step, choose to install only ODI Studio and the local agent. This is the client software.

Where can I find my mountain lion installer included with 2012 mac mini

I just bought a 2012 mac mini and I want to install mountain lion on an SSD that I bought separately. Where can I find the mountain lion installer file to create a bootable USB install drive? When I go to the mac app store, mountain lion is not listed in my purchases and when I try to buy it, it says "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer." It's already installed on the mac mini, I just need the installer file so I can install it on my SSD.

keg55 wrote:
You might be able to simply boot into the ML Recovery HD, select Reinstall OS X and point to your SSD drive. You won't capture the InstallESD.dmg file to create a USB thumb drive installer.
OR.... to create a USB thumb drive of your pre installed ML, you would need to redownload Mountain Lion then grab the InstallESD.dmg file and create your USB thumb drive.Here is how I've done it using Internet Recovery to get my pre installed OS X.
Attach a USB external drive to your system. Formated as Mac OS Extended (Journal) and GUID partition table.
Restart using Command+R+Option to boot into Apple's Recovery HD. This will get you the original version. Or just Command+R to boot into your ML Recovery HD.
Select Reinstall OS X from the OS X Utilities menu.
You will have to watch the download. After it completes and your system restarts, at the black screen disconnect the external USB drive.
After you are back to your current desktop, insert the external USB drive. There should be a single folder on the drive called 'Install Data' (I think). Find the InstallESD.dmg file and copy it to a folder on your current system (Downloads, for example).
Follow any of the internet instructions to create a ML USB thumb drive.
I tried this method, and while it did get me the installer image, when I restored it to an external and tried to use it to restore a Late 2012 Mac Mini, I got the same "No" symbol I did with other ML installers.
Here are some screenshots of what was loaded onto my external before I yanked it, when the screen turned black durring the restart. The highlighted file is what I restored to my external to use to restore the Mac Mini.

Where can i find lastest Music player installer fo...

where can i find lastest Music player installer file for Nseries which is compatible for symbian set, anyone can help me?Message Edited by gliew_87 on 19-Jun-200707:01 PM

go to www.nokia.co.uk, click on get support and software on the top green toolbar. Then scroll down and click on the button which says update your phone software. From here you select your phone and follow the instructions. gd luck!

MS Project Install: 'Setup can not find PrjPror.WW\PrjPrrWW.cab"

Hi, I am trying to install MS project 2013 trial, but everytime I try to install it it gives this error:
'Setup can not find PrjPror.WW\PrjPrrWW.cab"
No idea how to deal with it, already tried the 64 bit version but that did not work.
Thanks for your help
Floris

Does the PrjPror.WW\PrjPrrWW.cab is really in the local path now?
If you are using installation source from DVD, please copy them to the local drive and then reinstall it.
Try to redownload the Microsoft Project 2013 Trial from the link
http://technet.microsoft.com/en-us/evalcenter/hh973401.aspx
And then turn off all of security programs, reinstall it within local administrator account permission.
Thanks.
Tony Chen
TechNet Community Support

Lync 2013 Setup and configure HELP

Hi,
i am having some trouble with my lync 2013 setup. i have configured lync to a stage were all users can connect to lync being inside or outside my network, we can send chats messages to each other but only if we are on the same LAN can we use the video, audio
and app sharing and desktop sharing. also i need to know how do i get my lync to communicate with other companies.
ok here is my setup.
ISP Cisco 877 router with 5 Static ips connects to my TMG 2010 (external Nic) internal nic connects to my LAN. all other devices plug into same LAN my TMG is forwarding ports to my exchange and helpdesk system. i have created all internal and external dns
entries. if i need an egde server were do i place this server.
network details below:
5 X ip: X.X.92.2
internal ip: X.X2.1 /24
please could someone assist me.
Kind Regards
Clemy
Cell : +27 72 864 0529

Hi There,
indeed your TMG Server should be equipped with 32 Network Interfaces as follows :
External
DMZ
Internal
the Lync Edge Server should be equipped with 2 Network Interfaces, usually the Edge server is placed inside a perimeter network which consists in 2 edge firewalls, one External and another one is Internal. please check the following link for detailed information
about the various Edge topology that are supported.
However you can always have a DMZ like your scenario which consists in a single firewall and connect the Edge server ends as follows
one interface to the TMG DMZ interface and one interface to the Internal Interface although this way you will be only protecting traffic from the DMZ interface.
kindly note that in case you chose to implement a secondary firewall take into consideration that the network relation from the the Edge internal interface to the internal LAN via the secondary firewall should be a route relation. since this is only the
supported scenario.
as for the reverse proxy you can still use the existing TMG as a reverse proxy since all published web components are actually located on the lync front-end server located on company LAN.
Regards,
Charbel Hanna
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Setup can not find a supported product

&Setup can not find a supported product3 I have an XFi XtremeGamer and I tried to update the console launcher and received the error that setup could not find a supported product. I have had this machine for 2 years on XP, and I used the autoupdate feature on the website. This feature found the device on my machine and listed a few updates including the console launcher. I would think if there was a problem, the autoupdate would issue some kind of error. I was able to update the driver on 2/7/08 without any problems using the autoupdate with the website, and I did install the wave studio suite yesterday with autoupdate without issues too. I have made no hardware changes to this machine. Device Manager lists the device as working properly. I do have sound from the card. I tried to download the launcher.exe package with the same result. It would seem that I would have had more issues if the card wasn't installed correctly including the?autoupdate feature not?working and not finding the card and other autoupdate software packages not installing correctly.
Any ideas? Thanks.

[color="#000000"]The Creative Console Launcher 2.60.35 update does not work for my X-Fi XtremeMusic soundcard with Vista 64-Bit OS.
Edit:
Either going through the creative autoupdate or downloading the file manually and trying to install this update, I get this message below. Yes, I have went to the right download webpage for my soundcard and operating system.
My Soundcard : X-Fi XtremeMusic SB0460
My Operating System : Vista 64-Bit
[color="#ff0000"]"Setup is unable to detect a supported product on your system. Please
ensure that your product is properly installed before running this
setup program".
[color="#ff0000"]?
[color="#000000"]?=======
[color="#ff0000"]?
<div class="DownloadFileName">File Name : CSL_PCAPP_LB_2_60_35.exe<div class="DownloadText">This download contains?the Creative Console Launcher application. For more information, read the rest of this web release note. This download supports the following audio devices only:
Sound Blaster? X-Fi? XtremeMusic<
Sound Blaster X-Fi XtremeGamer<
Sound Blaster X-Fi Platinum<
Sound Blaster X-Fi Fatalty?<
Sound Blaster X-Fi Elite Pro<
Sound Blaster X-Fi<
Sound Blaster X-Fi Surround 5. <
USB Sound Blaster X-Fi Xtreme Audio?Karaoke<
Fixes:
Rectifies the output delay when using line-in/microphone monitoring.<<font face="Tms Rmn">?<font face="Helv" size="2">?
Requirements:
Microsoft? Windows Vista? 32-bit or 64-bit, Windows? XP Professional x64 Edition or Windows XP Service Pack 2 (SP2)<
Creative Sound Blaster?audio devices listed above<
[color="#ff0000"]?
Message Edited by freesky on 0-02-2009 0:28 PM

Setup can not find a supported product...*I SERIOUSLY NEED HELP* SB-XFI

WinXp System
I've posted here before and no ones been able to help me with a solution..but this problem keeps occuring when I restart randomly when I get back to windows there will be no sound.
Here's the procedure I follow which works (randomly) after 2 or 3 hours of doing this over & over & over & over again..
Upon the sound not working I..
1: Add/Remove programs-uninstall creative drivers
2: Launch Driver sweeper (Guru3d) select Creative-Sound..****yse. Remove any entrys it finds.
3: Open the setup for the SBXFI drivers (the ONLY one that will work for me) .0.0. Created /30/2009
then Driver Uninstallation> Delete all shared Creative Audio Driver files
4: restart and clean boot back into windows.
5: I re-open that driver setup file and do -Driver Installation. Now most of the time it will run..wait a little bit then tell me to restart. This means it WILL NOT WORK. I know when its gonna work because it will pop up a windows caution box saying that the driver is unsigned and do I wanna continue.. I click yes and thats a sign it'll work..but that only happens after HOURS of doing this procedure..if Im lucky.
Tonight Im on hour 2 of this rubbish and Im absolutely sick of it..can someone provide a fool proof way to make these **bleep** drivers work?!? I've tried to run almost all the other drivers out there and if I attempt that I get the "Setup can not find a supported product..." for some reason this driver Im using is the only one that works..sometimes..
Message Edited by Wildone_06 on 05-06-2009 0:0 PM

Thanks, its [size="" face="Arial">Sound Blaster? X-Fi? XtremeMusic.
I got it working again around 0pm last night, after doing that procedure since 7pm. Now if its the wrong driver, it would never work..if its the right driver..it should work first time. So I have no idea why I have do this ritual and it'll eventually work after so many trys..is this software vodoo based or something!?
The OEM drivers that came with it certainly dont work (The 'setup can not find ect ect) so its a mystery to me.

ITunes 10.5 can't find any of my original files, even though they show in my library

I was hoping you could help me with iTunes 10.5. This update has been a pain. When I first installed it, my entire library was gone. Luckily, I saved the "iTunes Library" file before updating and copied it in place and my library appeared. But now the problem I'm having is that the iTunes can't find any of the "original" files, even though my iTunes Media file location has not changed (it's on an external network drive". When I click on the "Do you want to find the original file" I can find it in the appropriate folder. I checked the "Preferences" and under "Advanced" I re-mapped it to the appropriate location and already had the 2 boxes for iTunes organizing files checked. Then went to "File" and "Organize Library" and clicked the first check box and then got the "Copying Files" bar. When this was completed, I thought it would be able to find the original files. But I'm still getting the same error message about not being able to find the "original" files. Do you have any suggestions?

I was hoping you could help me with iTunes 10.5. This update has been a pain. When I first installed it, my entire library was gone. Luckily, I saved the "iTunes Library" file before updating and copied it in place and my library appeared. But now the problem I'm having is that the iTunes can't find any of the "original" files, even though my iTunes Media file location has not changed (it's on an external network drive". When I click on the "Do you want to find the original file" I can find it in the appropriate folder. I checked the "Preferences" and under "Advanced" I re-mapped it to the appropriate location and already had the 2 boxes for iTunes organizing files checked. Then went to "File" and "Organize Library" and clicked the first check box and then got the "Copying Files" bar. When this was completed, I thought it would be able to find the original files. But I'm still getting the same error message about not being able to find the "original" files. Do you have any suggestions?

I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these?

I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these? I saw a reply however, it was not my name and assumed it was for someone else. Now timed out. Can UI still have help on this matter please?

If you registered PSE before, go to the main page of adobe.com, sign in and go to your account and you should find the serial number there in your purchases.

After updating to firefox 5 all my bookmarks are lost, and I can not find an old places.sqlite file. What happened to my bookmarks?

I updated from Firefox 3 to Firefox 5 (Windows XP), and all my bookmarks are lost. Maybe I should have thought of making a backup but I did not think of this and previously after an update I could find them again. Now I can not find my bookmarks anywhere, all files in my profile have a date and time from the new installation. Is there any chance of finding my bookmarks somewhere else on my computer? If so, where are they and how can I restore them?

Thanks for the answer. I read the article but it seems that the solution to my problem is not in there. Apart from the lost bookmarks Firefox is working fine, also I can make new bookmarks and delete them without problems. When I restart Firefox I don't loose them.
Apparently after installing Firefox 5 everything of Firefox 3 was deleted including my profile. The only bookmark .json file I have is from the new installation, which means it does not contain any of my old bookmarks. It now has today's date and time.
In my profile I have three 'places' files, now all with today's date and time:
- places.sqlite (10240 kb)
- places.sqlite-shm (32 kb)
- places.sqlite-wal (865 kb)
But even though places.sqlite is large, it apparently does not contain my old information. Or could it? Then how to get to it?

Where can i find the BI Java Connector Files (for example: bi_sdk_jdbc.rar)

Hi,
where can i find the BI Java Connector Files:
bi_sdk_jdbc.rar
bi_sdk_xmla.rar
bi_sdk_sapq.rar
bi_sdk_odbo.rar
Can anyone help me?

hi Christian,
these files should be included in bi java sdk
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/webcontent/uuid/78b3db58-0501-0010-b895-f75cd8fdf674 [original link is broken]
hope this helps.

I have a cannon mg2100. When I scan the error message says it can't find a path to the file

My cannon mg1200 prints and scans but suddenly the scanned photo/doc can't find a path to any file. I just started having this problem yesterday.

Hi, trikerider47!
So that the Community can help you better, we will need to know exactly which operating system is running on your computer (Windows or Mac, and which version thereof). That, and any other details you'd like to give will help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

Where can I find the iPad back up files on my PC?

Where can I find the iPad back up files on my PC?

Try "C:\Users\<User>\AppData\Roaming\Apple Computer\MobileSync\Backup".
If Moible Applications is inside iTunes instead of your media folder then you should consider using File > Library > Organize Library > Rearrange files in the folder "<Media Folder>".
See also make a split library portable.
tt2

Lync 2013 "Setup can't find or validate an installation file...."

Similar Messages

Maybe you are looking for