Lync 2013 : two problems 1) quicked off from meeting when presenter change 2) Freeze when leaving first call of day

Hello,
I have two problems with Microsoft Lync 2013 (see level in screenshot). The first one appeared after May Windows updates and is so annoying that I decided myself to open a post in this forum, with the second one. The first problem is the most important for
me (see why when reading) and the second one is the cherry on the cake if solved, but is minor.
1) I'm kicked off from meetings when presenters change
In an online meeting, when presenters change, I'm kick off since last May updates (very clear since it didn't happen before). I'm unable to specify if it occurs when I'm presenter or just attendee, but that could influence. I will try to report if/when I
notice a difference.
THIS IS REALLY IMPORTANT, Please help me solve this !
2) Lync freezes for approx. 30' to 1min. when leaving first call of day
I reboot my PC every day. I always notice that after leaving voice call from my first meeting of the day, Lync freezes (doesn't respond message) for 30' to 1min. This is when I leave audio, not meeting window. This never occurs again in the course of the
day. Windows goes into hourglass, then it works again.
Does anyone know about this ? Any action to help diagnose or solve this ?
Again this is less important than first problem
Thanks for help
-Pierre

The steps to remove the update:
Open Control Panel, click Programs, and then, under Programs and Features, clicking View installed updates.
Click the update that you want to remove, and then click Uninstall.
For Lync 2013 May 2014 update, it is KB2880980.
You can check the following website about the drivers:
http://www.driverscape.com/download/plantronics-c320-m
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Lisa Zheng
TechNet Community Support

Similar Messages

Lync 2013 and problem with copy/paste from SQL Mgmt Studio.

Hi Everyone,
Recently one of ours programmers noticed a very interesting issue which is a real pain in the a## for him and his colleagues. It was all fine with Lync client 2010, problem started when moved some people to 2013 client.
When someone sends him a message with SQL Code, and he is pasting it into SQL mgmt std. he gets dashes "-" instead of spaces " ".
I thought this is a local PC issue, but:
1. On 2010 it worked, stopped all of a sudden when they changed lync client to 2013
2. They are pasting code on the SERVER not local SQL mgmt std. on their client machines
3. Even if I send him a code from Lync 2010 and he is pasting that from his 2013 client - he gets "-" dashes, so I guess it is not important from where I send the message, but from where he is copying it.
As for now, I have noticed that problem with guys from England and region of APAC - they have lync 2013 client already.
Really appreciate any help as I donot have any point where to start troubleshooting...
Cheers guys,

Hi,
I test the issue with my colleague and didn't find the same issue.
Here is the screenshot:
So please check if Lync Server 2013 and all the issued Lync 2013 client update to the latest version firstly, it not update to the latest version, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Lync 2013 credentials problems on domain computers

Hi folks,
We are having trouble with Lync 2013 and credentials on our domain computers. We have been using Office 365 and Outlook for our email for a couple years and it has worked well enough, so recently we decided we wanted to start using Lync as well. We deployed
the Office 365 Pro Plus suite available to us through our Office 365 subscription and signed in. The first sign-in went as expected. It asked for a username and password, asks if it should remember those credentials for next sign-in (yes), then connects and
everything with Lync itself functioned normally. Subsequent sign-ins have not been normal.
When a user restarts their computer and launches Lync it remembers their user name but not their password. Once they type their password in it asks if it should remember those credentials for next sign-in again, then connects. If a user exits and re-launches
Lync without restarting it remembers their credentials and signs in properly, but then immediately a popup box appears saying that "Credentials are required" in order for Lync to get calendar information from Outlook ( http://i.imgur.com/hqcK426.png
We know the problem is only happening with computers on our domain, but we don't know why. I tested things out on my home desktop and network by installing Office 365 Pro Plus, setting up Outlook, and then Lync. Both Outlook and Lync auto-discovered everything
normally after getting my credentials and Lync behaves as expected every time the program launches. I then brought my personal laptop in and tried the same thing on my work network to see if it is network related, but Lync behaves normally on that computer
as well.
I originally worked on the problem at the Office 365 Community Forums ( http://community.office365.com/en-us/f/166/t/246014.aspx ), but after we isolated the problem to something with the domain computes I was told that they could not help me any further
and was referred here. Does anyone have any ideas as to what is keeping Lync from behaving properly on our domain computers? We have a mix of Windows 7 x64 and Windows 8.1 x64 computers, all joined to the same domain and with the same basic suite of software.
Thanks,
~Misharum
PS: How do I verify my account? The outlook.com email address has been verified, but I don't see anywhere to do verification in my TechNet profile here.

Yeah, the clients are fully patched. I put a support ticket in through Office 365 and the rep there was able to help me. It ended up being two separate problems.
Lync was not remembering my credentials to automatically log me in between restarts:
Installed the latest version of the Microsoft Online Services Sign-In Assistant.
After signing signing into Lync another popup appeared asking for credentials again to access calendar information. (two steps to solve this one).
In Active Directory Users and Computers, open up the properties of each affected user, go to the Attribute Editor tab, find and double click the proxyAddress attribute, and add in
sip:[email protected] where the userid is the user's login name and domain.com is your domain. I'd imagine this is scriptable in PowerShell but I don't know enough to do it.
Then on the computer that the users will be using, while the user is logged in, add a dword of NoDomainUser = 1 in the registry at HKCU\Software\Microsoft\Office\15.0\Common\Identity. The most sensible way to do this in my mind is with a group policy so
it will get written to each user's registry under their profile when they log in.
After doing all of this Lync remembered my credentials between restarts, signed me in automatically, and only gave that credentials popup on the first sign-in after applying both changes in step 2.

Lync 2013 Connectivity Problems

We have one computer that will not let anyone sign into Lync 2013. We have re-installed Lync, repaired Lync, tried using the manual configuration with the lync servers, compared registry settings from a machine that does work, compared certificates to
machine that works, and looked at network settings on the computer with no luck. When you attempt to login, you enter your email address which is <[email protected] and then get prompted for a password. Once you enter your password, you just see the
message "Connecting to server and signing in." This will just sit here to many many minutes and not ever do anything. We are using Office 365, Office 2013, and using a hosted exchange environment with dirsync with password sync. Can anyone help with
this issue? It is definitely something local to this computer because the user can login to Lync on other computers. Thanks.

Get sign in automatic configuration and download lync from office 365 portal
Then try again to sign in if still have problem try to use the following
For Problem acquiring a personal certificate that is required to sign in If the user’s sign address has recently changed, they may need to delete cached sign-in data. Ask users to run the automated
Fix it wizard in
Microsoft Knowledge Base article 2698626.
Please remember, if you see a post that helped you please click (Vote As Helpful" and if it answered your question, please click (Mark As Answer).

Lync 2013 installation problem - dll file missing

Hi,
I've encountered this problem with Lync 2013 installation on 2 different computers.
Error message:
"perfboost.exe - System Error
The program can't start because appvisvsubsystems32.dll is missing from your computer. Try reinstalling the program to fix this problem."
The first time i got this error was while installing Lync 2013 (32-bit ver.) for a user with an E1 Office 365 plan and an Office 2013 Home and Business suite installed (32-bit version) on a 64-bit Win 7 Pro machine. The installation completed despite the
error message but Lync could not connect to the server saying that "the server for
domain.eu cannot be found". I tried the manual configuration with the same result. I'm confident it's not a DNS problem as other users within the same domain are using Lync 2013 with no connectivity issues.
The second time I got the error was when installing Lync 2013 on a new machine, also with Office 2013 H&B 32-bit and Lync 2013 32-bit downloaded from the user's Office 365 account (also plan E1). The installation also completed but I had no problems
logging the user in (it's another user, same domain)
Anyone has a clue about this? Should I install the 64-bit Lync version instead? Would it conflict with the 32-bit Office 2013?
Thanks.
Luka

Hi Teklace,
The issue is more related to Office, You may repair Office 2013 using the following link and check if it works fine as expected:
https://support.office.com/en-us/article/Repair-an-Office-application-7821d4b6-7c1d-4205-aa0e-a6b40c5bb88b?ui=en-US&rs=en-US&ad=US
Some similar cases for your reference.
https://social.technet.microsoft.com/Forums/office/en-US/4fdea64f-e7c8-4e08-95b2-fb54984d617f/appvisvsubsystems32dll-error?forum=officesetupdeploy
http://answers.microsoft.com/en-us/office/forum/officeonline-word_online/appvisvsubsystems32dll/75c4067b-d23f-4d50-bd23-82934852fed8
http://answers.microsoft.com/en-us/office/forum/office_365hp-office_install/appvisvsubsystem32dll/106805c1-5928-4a7e-a8b7-6c438e279969
If the error still exists, to ensure you get better support, I suggest you turn to our Office forum for dedicated support. With the assistance provided there, it is more likely the issue can
be resolved. Sorry for any inconvenience this caused. Thanks for your understanding.
https://social.technet.microsoft.com/Forums/office/en-US/home?category=officeitpro
Best regards,
Eric

Two problems: showMessageDialog cut off when it renders at all

I'm using a dialog box with the following code:
JOptionPane.showMessageDialog(null, "The filename must end with '.csv'", "Save File Error", JOptionPane.ERROR_MESSAGE);
Sometimes, seemingly at random, the message and the OK button don't show up. Just the dialog box and the title. Moving the mouse over it makes the OK button show up. Has anyone else experienced this and is there a way to fix it?
Also, when the message does show up, the last couple of characters are often cut off, as if there's not enough room for them. Is there any way to make sure that the dialog box will be big enough to hold the message?
Thanks,
Chris Funkhouser

I have a similar problem. I have been converting an old Java application from JDK 1.1.8 (and Swing 1.03) to JDK 1.3.1. One JPanel contains other JPanels that contain a group of JButtons, a JTable, and some JComboBoxes. When I select a row in the JTable and press the Delete button, a confirmation dialog is shown:
int confirmation = JOptionPane.showConfirmDialog
(Joezilla.getFrame(),
"Are you sure you want to\ndelete selected rows?",
"Confirm",
JOptionPane.YES_NO_OPTION,
JOptionPane.PLAIN_MESSAGE);
The dialog comes up with no prompt text displayed, and only the Yes button is displayed. The No button will appear if you move the mouse over it.

2013 SP1 problem - the microsoft exchange administrator has made a change that requires you quit and restart outlook

I've looked at other answers to this problem but they seem to relate to multi server environments or new migrations - neither apply here. The Exchange 2013 server was implemented last year as a migration from Exchange 2007. It has been running well since.
I upgraded to SP1 on Sunday night and since then all users, regardless of Outlook version, are continually being asked to "the microsoft exchange administrator has made a change that requires you quit and restart outlook". Clicking OK loads Outlook
normally (no restart). I can delete the Outlook profile and set up a new profile OK but the issue comes back again. Deleting the users roaming or local profile does not help either.
The CAS seems to be set correctly - when I run Get-MailboxDatabase | fl RpcClientAccessserver it returns the correct server.
There are no public folders set up.

Thanks for the update. It was the PF that caused the issue.
When I removed the old Exchange 2010 server it did not remove everything for AD. Had to manually remove the older sever.

I am trying to print labels from my address book, and when I change it to have the first names first, only some names work. Does anyone know what the problem is or how to fix it?

I want to print labels from my address book, but when I try to put first names first, only some will work. Does anyone know why this is happening and how to fix it?

Hi MollyPhloot07,
I'm glad you found the coupons.com app and you might also want to take a look at the GroceryIQ app from the same company. Please note that at this time, printing is only support from iPad to HP wireless inkjet printer. That's most likely the reason why your Canon isn't displaying when attempting to print. The other way to go might be emailing the coupons you want to your email address, then open that email and print from a conventional desktop or laptop computer.
Hope this helps!
Coupon Support

Presenter changes text properties when published - still having problems...

When I go to Publish my Powerpoint (2007, Windows XP Prof. 32-bit) slide show into Presenter (7.0.2), and run the Presenter edition, I'm finding my text formatting is changed. Font size, alignment, spacing, etc. isn't being carried through.
Any ideas?
(I updated to 7.0.2, but that did not solve the problem.)
Need help at helper's earliest convenience, thanks.
JT

Here is another example of an issue. Clip art images are missing entirely from animations. There should be a clip art image of a hand holding up two fingers (for step 2) to the right of image of a computer screen. This bug has been an issue for at least 2 months - making me nuts.
FYI: I'm on a mac running parallels (Windows XP) with Powerpoint 2007 running presenter 7.0.5

My iPhone 4S battery drain quickly since the new update. It also freezes when I go to my contact list

Since I added the new update to my iPhone 4S the battery drains all day long. All I do is recharge the battery. Also when I go to my contact list the phone freezes in that screen and I have go out and come back in pulled up the name, then go back out to pull up the number. How can I fix this. I turned off most of the apps running in the back ground but it not helping.

http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/

I can't turn off my passcode. My phone keeps freezing when I try to open my phone or turn the passcode off. What do I do?

When I go to open my phone normally my pass code screen pops up. It was working fine all day and then all of a sudden it started freezing. If I slide the bar across to open my phone it just freezes on that screen and I can't get into my phone. I had to shut my phone completely down to get in. I tried to turn my pass code off and I can't even get into that screen. So please help!

Try resetting by pressing and holding the sleep/wake button and the home button for 10-15 seconds until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.

I loaded PSE9 and uploaded from my camera. Now PSE9 freezes when turned on.

I have over 40 gigs free and enough ram as per box. I uploaded 2600+ photos from memory cards and assigned them to external hard drive. PSE9 is on computer hard drive. When I load PSE9 workspace, it doesn't let me do anything. It worked while I was adding photos.

>external hard drive
If you ever unplug an external and plug it back in... and the drive letter changes... you may have problems

Lync 2013 Windows Mobile 8 connection issues

Hi
I have setup an internal test Lync 2013 system to get sign off from management. I have installed all the roles on a single server. So far clients on PC's can sign in and so can iOS devices once I had turned on the internal web settings. However, we use Windows
Mobile 8 devices and I can't get any to connect. What ever I try I get a message saying that I need to check my network connection.
These devices are on the same internal network as the iOS devices. Is there anything special that needs to be done for Windows Mobile to work?
Thanks.

2013-12-09 13:26:57.393 Lync[4560:4644] INFO UTILITIES CHttpConnection.cpp/293:Empty body set?
2013-12-09 13:26:57.440 Lync[4560:5068] ERROR UTILITIES CHttpConnection.cpp/1115:Request failed with the WININET errorCode (0x%u03CD31B8): -2146697191
2013-12-09 13:26:57.441 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request() with status = 0x22020001
2013-12-09 13:26:57.441 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request resulted in E_ConnectionError (E2-2-1). The retry counter is: 1
2013-12-09 13:26:57.441 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x3d70d18)
2013-12-09 13:26:57.441 Lync[4560:4644] INFO TRANSPORT CMetaDataManager.cpp/581:Received response for meta data request of type 60 with status 570556417
2013-12-09 13:26:57.441 Lync[4560:4644] ERROR TRANSPORT CMetaDataManager.cpp/597:Unable to get a response to an unauthenticated get to url https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.441 Lync[4560:4644] INFO TRANSPORT CAuthenticationResolver.cpp/210:MetaData retrieval for url https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com completed with status 570556417
2013-12-09 13:26:57.441 Lync[4560:4644] INFO TRANSPORT CAuthenticationResolver.cpp/239:Deleting 1 pended Meta data requests for url https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.441 Lync[4560:4644] ERROR TRANSPORT CAuthenticationResolver.cpp/288:Unable to get the meta data for server url https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.441 Lync[4560:4644] INFO TRANSPORT CAuthenticationResolver.cpp/293:Failing request to the request manager
2013-12-09 13:26:57.441 Lync[4560:4644] INFO TRANSPORT CRequestManager.cpp/273:Failing secure request UcwaAutoDiscoveryRequest with status E_ConnectionError (E2-2-1)
2013-12-09 13:26:57.442 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2013-12-09 13:26:57.442 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1284:Received autodiscovery response with status E_ConnectionError (E2-2-1)
2013-12-09 13:26:57.442 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1242:Raising Autodiscovery event with status E_ConnectionError (E2-2-1) for eventType 0
2013-12-09 13:26:57.442 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/417:Received event for type 0 with status E_ConnectionError (E2-2-1)
2013-12-09 13:26:57.442 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/539:Autodiscovery scheduled retrial timer. Timer 0.000000 seconds
2013-12-09 13:26:57.442 Lync[4560:4644] INFO APPLICATION CAlertReporter.cpp/64:Alert received! Category 1, Type 201, level 0, error E_ConnectionError (E2-2-1), context '', hasAction=false
2013-12-09 13:26:57.442 Lync[4560:4644] INFO APPLICATION CAlertReporter.cpp/117:Alert cleared of Category 1, Type 201, cleared 0 alerts
2013-12-09 13:26:57.442 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. GET-AuthenticatedUserGetRequest(03D48860): E_ConnectionError (E2-2-1) (RemoteNetworkTemporaryError); Done with req.; Stopping resend timer
2013-12-09 13:26:57.445 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/2094:suspensionState = 2
2013-12-09 13:26:57.446 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/2070:adIsEnabled = 1, sipUri = sip:[email protected], m_internalADUrlInput = m_externalADUrlInput =
2013-12-09 13:26:57.446 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1003:Discover UCWA urls for sip:[email protected]
2013-12-09 13:26:57.446 Lync[4560:4644] INFO TRANSPORT TransportUtilityFunctions.cpp/488:Extracted DOMAIN.com from sip:[email protected]
2013-12-09 13:26:57.446 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1061:Starting Lync Discovery with urls http://lyncdiscoverinternal.DOMAIN.com/?sipuri=sip:[email protected] and http://lyncdiscover.DOMAIN.com/?sipuri=sip:[email protected]
2013-12-09 13:26:57.446 Lync[4560:4644] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with url = https://lyncdiscoverinternal.DOMAIN.com/?sipuri=sip:[email protected], maxHops = 10
2013-12-09 13:26:57.446 Lync[4560:4644] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl called with url = https://lyncdiscoverinternal.DOMAIN.com/, hopCount = 0, maxHops = 10
2013-12-09 13:26:57.446 Lync[4560:4644] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with url = https://lyncdiscoverinternal.DOMAIN.com/, Hops = 0, status = S0-0-0
2013-12-09 13:26:57.446 Lync[4560:4644] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName () domain () username () password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2013-12-09 13:26:57.447 Lync[4560:4644] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET https://lyncdiscoverinternal.DOMAIN.com/?sipuri=sip:[email protected]
Request Id: 03D48860
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2013-12-09 13:26:57.447 Lync[4560:4644] INFO UTILITIES CHttpConnection.cpp/293:Empty body set?
2013-12-09 13:26:57.450 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. GET-UnAuthenticatedGet(03D48860)
2013-12-09 13:26:57.450 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1883:Successfully started the GetUserUrlOperation request for https://lyncdiscoverinternal.DOMAIN.com/?sipuri=sip:[email protected]
2013-12-09 13:26:57.450 Lync[4560:4644] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with url = http://lyncdiscoverinternal.DOMAIN.com/?sipuri=sip:[email protected], maxHops = 10
2013-12-09 13:26:57.450 Lync[4560:4644] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl called with url = http://lyncdiscoverinternal.DOMAIN.com/, hopCount = 0, maxHops = 10
2013-12-09 13:26:57.450 Lync[4560:4644] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName () domain () username () password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2013-12-09 13:26:57.451 Lync[4560:4644] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET http://lyncdiscoverinternal.DOMAIN.com/
Request Id: 03D48F68
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2013-12-09 13:26:57.451 Lync[4560:4644] INFO UTILITIES CHttpConnection.cpp/293:Empty body set?
2013-12-09 13:26:57.455 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. UrlTrustResolver(03D48F68)
2013-12-09 13:26:57.455 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1915:Successfully started the GetUserUrlOperation request for http://lyncdiscoverinternal.DOMAIN.com/?sipuri=sip:[email protected]
2013-12-09 13:26:57.455 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/539:Autodiscovery scheduled retrial timer. Timer 30.000000 seconds
2013-12-09 13:26:57.470 Lync[4560:5068] INFO UTILITIES AudioManager.cpp/48:AudioManager::playOnce called.
2013-12-09 13:26:57.470 Lync[4560:5068] INFO UTILITIES AudioStream.cpp/69:Initializing AudioStream
2013-12-09 13:26:57.470 Lync[4560:5068] INFO UTILITIES AudioStream.cpp/135:Initializing AudioClient
2013-12-09 13:26:57.472 Lync[4560:4620] INFO UTILITIES CHttpConnection.cpp/936:Headers Available with response status = 200 for request UcwaAutoDiscoveryRequest
2013-12-09 13:26:57.473 Lync[4560:5068] INFO UTILITIES AudioStream.cpp/170:Setting AudioClient Properties
2013-12-09 13:26:57.473 Lync[4560:5068] INFO UTILITIES AudioStream.cpp/220:Setting Stream Category 0
2013-12-09 13:26:57.474 Lync[4560:5068] INFO UTILITIES AudioStream.cpp/181:Stream Category Successfully set to: [0]
2013-12-09 13:26:57.478 Lync[4560:4620] INFO UTILITIES CHttpConnection.cpp/1031:Response status = 200 for request UcwaAutoDiscoveryRequest
2013-12-09 13:26:57.478 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x0
2013-12-09 13:26:57.478 Lync[4560:4644] INFO TRANSPORT TransportUtilityFunctions.cpp/925:<ReceivedResponse>
GET http://lyncdiscoverinternal.DOMAIN.com/
Request Id: 03D48F68
HttpHeader:Cache-Control no-cache
HttpHeader:Content-Length 1182
HttpHeader:Content-Type application/vnd.microsoft.rtc.autodiscover+xml; v=1
HttpHeader:Date Mon, 09 Dec 2013 13:27:11 GMT
HttpHeader:Expires -1
HttpHeader:Pragma no-cache
HttpHeader:Server Microsoft-IIS/8.5
HttpHeader:StatusCode 200
HttpHeader:X-AspNet-Version 4.0.30319
HttpHeader:X-Content-Type-Options nosniff
HttpHeader:X-MS-Server-Fqdn LYNCFQDN.DOMAIN.com
HttpHeader:X-Powered-By ASP.NET
ï»¿<?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" AccessLocation="Internal"><Root><Link token="Domain" href="https://LYNCFQDN.DOMAIN.com/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=DOMAIN.com" /><Link token="User" href="https://LYNCFQDN.DOMAIN.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=DOMAIN.com" /><Link token="Self" href="https://LYNCFQDN.DOMAIN.com/Autodiscover/AutodiscoverService.svc/root?originalDomain=DOMAIN.com" /><Link token="OAuth" href="https://LYNCFQDN.DOMAIN.com/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=DOMAIN.com" /><Link token="External/XFrame" href="https://LYNCFQDN.DOMAIN.com/Autodiscover/XFrame/XFrame.html" /><Link token="Internal/XFrame" href="https://LYNCFQDN.DOMAIN.com/Autodiscover/XFrame/XFrame.html" /><Link token="XFrame" href="https://LYNCFQDN.DOMAIN.com/Autodiscover/XFrame/XFrame.html" /></Root></AutodiscoverResponse>
</ReceivedResponse>
2013-12-09 13:26:57.491 Lync[4560:4644] INFO TRANSPORT CUcwaAutoDiscoveryResponse.cpp/112:location value is internal
2013-12-09 13:26:57.491 Lync[4560:4644] INFO TRANSPORT CUcwaAutoDiscoveryResponse.cpp/195:User url is https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.491 Lync[4560:4644] INFO UTILITIES CXmlParser.cpp/181:parse returned 0
2013-12-09 13:26:57.491 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x3d48f68)
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with url = http://lyncdiscoverinternal.DOMAIN.com/, Hops = 1, status = S0-0-0
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. UrlTrustResolver(03D48F68): S0-0-0 (Success); Done with req.; Stopping resend timer
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/393:CUcwaAutoDiscoverGetUserUrlOperation::onEvent received. Status = S0-0-0, url = http://lyncdiscoverinternal.DOMAIN.com/
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/449:Received a root response
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/456:Running trust check on user url. url = https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with url = https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com, maxHops = 1
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl called with url = https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user, hopCount = 0, maxHops = 1
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with url = https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user, Hops = 0, status = S0-0-0
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation completed with url = http://lyncdiscoverinternal.DOMAIN.com/?sipuri=sip:[email protected], userUrl = https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com, status = S0-0-0
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/399:Cancelling all requests
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/409:Cancelling request: 0x3d48860
2013-12-09 13:26:57.493 Lync[4560:4644] INFO TRANSPORT ucmp/transport/session/private/CSessionBase.hxx/158:Cancelling request: 0x3d48860
2013-12-09 13:26:57.493 Lync[4560:4644] ERROR UTILITIES CHttpConnection.cpp/1115:Request failed with the WININET errorCode (UcwaAutoDiscoveryRequest): -2147467260
2013-12-09 13:26:57.493 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation completed with url = https://lyncdiscoverinternal.DOMAIN.com/?sipuri=sip:[email protected], userUrl = , status = W_Cancelled (W0-0-6)
2013-12-09 13:26:57.493 Lync[4560:4644] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(1) returning: credType (1) signInName ([email protected]) domain (mamd1) username (prp350197) password.empty() (0) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(1)
2013-12-09 13:26:57.493 Lync[4560:4644] INFO TRANSPORT CMetaDataManager.cpp/403:Received a request to get the meta data of type 0 for url https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.493 Lync[4560:4644] INFO TRANSPORT CMetaDataManager.cpp/467:Sending Unauthenticated get to get the web-ticket url
2013-12-09 13:26:57.493 Lync[4560:4644] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName () domain () username () password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2013-12-09 13:26:57.493 Lync[4560:4644] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
Request Id: 03D6DE70
HttpHeader:Accept
HttpHeader:X-MS-WebTicket xxxxxxxxxx
</SentRequest>
2013-12-09 13:26:57.494 Lync[4560:4644] INFO UTILITIES CHttpConnection.cpp/293:Empty body set?
2013-12-09 13:26:57.508 Lync[4560:4644] INFO TRANSPORT CAuthenticationResolver.cpp/109:Waiting on Meta Data from https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.508 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. GET-AuthenticatedUserGetRequest(03D48860)
2013-12-09 13:26:57.508 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1189:Submitting Authenticated AutoDiscovery request to https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.508 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1662:Ignoring GetUserUrlOperation event as current state is 6
2013-12-09 13:26:57.508 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1664:Request url was https://lyncdiscoverinternal.DOMAIN.com/?sipuri=sip:[email protected]
2013-12-09 13:26:57.563 Lync[4560:4624] ERROR UTILITIES CHttpConnection.cpp/1115:Request failed with the WININET errorCode (0x%u03CD31B8): -2146697191
2013-12-09 13:26:57.564 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request() with status = 0x22020001
2013-12-09 13:26:57.564 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request resulted in E_ConnectionError (E2-2-1). The retry counter is: 0
2013-12-09 13:26:57.565 Lync[4560:4644] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName () domain () username () password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2013-12-09 13:26:57.566 Lync[4560:4644] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
Request Id: 03D6DE70
HttpHeader:Accept
HttpHeader:X-MS-WebTicket xxxxxxxxxx
</SentRequest>
2013-12-09 13:26:57.566 Lync[4560:4644] INFO UTILITIES CHttpConnection.cpp/293:Empty body set?
2013-12-09 13:26:57.621 Lync[4560:4600] ERROR UTILITIES CHttpConnection.cpp/1115:Request failed with the WININET errorCode (0x%u031DA518): -2146697191
2013-12-09 13:26:57.622 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request() with status = 0x22020001
2013-12-09 13:26:57.622 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request resulted in E_ConnectionError (E2-2-1). The retry counter is: 1
2013-12-09 13:26:57.622 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x3d6de70)
2013-12-09 13:26:57.622 Lync[4560:4644] INFO TRANSPORT CMetaDataManager.cpp/581:Received response for meta data request of type 60 with status 570556417
2013-12-09 13:26:57.622 Lync[4560:4644] ERROR TRANSPORT CMetaDataManager.cpp/597:Unable to get a response to an unauthenticated get to url https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.622 Lync[4560:4644] INFO TRANSPORT CAuthenticationResolver.cpp/210:MetaData retrieval for url https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com completed with status 570556417
2013-12-09 13:26:57.622 Lync[4560:4644] INFO TRANSPORT CAuthenticationResolver.cpp/239:Deleting 1 pended Meta data requests for url https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.622 Lync[4560:4644] ERROR TRANSPORT CAuthenticationResolver.cpp/288:Unable to get the meta data for server url https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.622 Lync[4560:4644] INFO TRANSPORT CAuthenticationResolver.cpp/293:Failing request to the request manager
2013-12-09 13:26:57.622 Lync[4560:4644] INFO TRANSPORT CRequestManager.cpp/273:Failing secure request UcwaAutoDiscoveryRequest with status E_ConnectionError (E2-2-1)
2013-12-09 13:26:57.623 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2013-12-09 13:26:57.623 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1284:Received autodiscovery response with status E_ConnectionError (E2-2-1)
2013-12-09 13:26:57.623 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1242:Raising Autodiscovery event with status E_ConnectionError (E2-2-1) for eventType 0
2013-12-09 13:26:57.623 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/417:Received event for type 0 with status E_ConnectionError (E2-2-1)
2013-12-09 13:26:57.623 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/539:Autodiscovery scheduled retrial timer. Timer 60.000000 seconds
2013-12-09 13:26:57.623 Lync[4560:4644] INFO APPLICATION CAlertReporter.cpp/64:Alert received! Category 1, Type 201, level 0, error E_ConnectionError (E2-2-1), context '', hasAction=false
2013-12-09 13:26:57.623 Lync[4560:4644] INFO APPLICATION CAlertReporter.cpp/117:Alert cleared of Category 1, Type 201, cleared 1 alerts
2013-12-09 13:26:57.623 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. GET-AuthenticatedUserGetRequest(03D48860): E_ConnectionError (E2-2-1) (RemoteNetworkTemporaryError); Done with req.; Stopping resend timer
2013-12-09 13:26:57.693 Lync[4560:5068] INFO UTILITIES AudioStream.cpp/191:Initializing Audio Render Client
2013-12-09 13:26:57.693 Lync[4560:5068] INFO UTILITIES AudioStream.cpp/229:Loading Wave file
2013-12-09 13:26:57.693 Lync[4560:5068] INFO UTILITIES WaveBuffer.cpp/40:Initializing Wave Buffer
2013-12-09 13:26:57.694 Lync[4560:5068] INFO UTILITIES WaveBuffer.cpp/80:Verifying Wave Buffer information
2013-12-09 13:26:57.694 Lync[4560:5068] INFO UTILITIES WaveBuffer.cpp/118:Extracting Wave File Format
2013-12-09 13:26:57.694 Lync[4560:5068] INFO UTILITIES WaveBuffer.cpp/152:WAVE FORMAT : BitsPerSample: 32, SamplesPerSecond: 48000, Channels: 2
2013-12-09 13:26:57.694 Lync[4560:5068] INFO UTILITIES WaveBuffer.cpp/155:STREAM FORMAT: BitsPerSample: 32, SamplesPerSecond: 48000, Channels: 2
2013-12-09 13:26:57.697 Lync[4560:5068] INFO UTILITIES AudioStream.cpp/284:Starting playing the Audio Stream
2013-12-09 13:26:57.697 Lync[4560:5288] INFO UTILITIES AudioStream.cpp/334:Audio Stream Started.
2013-12-09 13:26:57.697 Lync[4560:5288] VERBOSE UTILITIES AudioStream.cpp/339:Wav file being played for the first time on AudioStream object.
2013-12-09 13:26:57.723 Lync[4560:4624] INFO UTILITIES AudioManager.cpp/48:AudioManager::playOnce called.
2013-12-09 13:26:57.723 Lync[4560:4624] INFO UTILITIES AudioStream.cpp/69:Initializing AudioStream
2013-12-09 13:26:57.723 Lync[4560:4624] INFO UTILITIES AudioStream.cpp/135:Initializing AudioClient
2013-12-09 13:26:57.726 Lync[4560:4624] INFO UTILITIES AudioStream.cpp/170:Setting AudioClient Properties
2013-12-09 13:26:57.727 Lync[4560:4624] INFO UTILITIES AudioStream.cpp/220:Setting Stream Category 0
2013-12-09 13:26:57.727 Lync[4560:4624] INFO UTILITIES AudioStream.cpp/181:Stream Category Successfully set to: [0]
2013-12-09 13:26:57.740 Lync[4560:4624] INFO UTILITIES AudioStream.cpp/191:Initializing Audio Render Client
2013-12-09 13:26:57.740 Lync[4560:4624] INFO UTILITIES AudioStream.cpp/229:Loading Wave file
2013-12-09 13:26:57.740 Lync[4560:4624] INFO UTILITIES WaveBuffer.cpp/40:Initializing Wave Buffer
2013-12-09 13:26:57.740 Lync[4560:4624] INFO UTILITIES WaveBuffer.cpp/80:Verifying Wave Buffer information
2013-12-09 13:26:57.740 Lync[4560:4624] INFO UTILITIES WaveBuffer.cpp/118:Extracting Wave File Format
2013-12-09 13:26:57.740 Lync[4560:4624] INFO UTILITIES WaveBuffer.cpp/152:WAVE FORMAT : BitsPerSample: 32, SamplesPerSecond: 48000, Channels: 2
2013-12-09 13:26:57.740 Lync[4560:4624] INFO UTILITIES WaveBuffer.cpp/155:STREAM FORMAT: BitsPerSample: 32, SamplesPerSecond: 48000, Channels: 2
2013-12-09 13:26:57.743 Lync[4560:4624] INFO UTILITIES AudioStream.cpp/284:Starting playing the Audio Stream
2013-12-09 13:26:57.744 Lync[4560:5308] INFO UTILITIES AudioStream.cpp/334:Audio Stream Started.
2013-12-09 13:26:57.744 Lync[4560:5308] VERBOSE UTILITIES AudioStream.cpp/339:Wav file being played for the first time on AudioStream object.
2013-12-09 13:26:58.209 Lync[4560:5288] VERBOSE UTILITIES AudioStream.cpp/411:Reached end of wave buffer
2013-12-09 13:26:58.209 Lync[4560:5288] VERBOSE UTILITIES AudioStream.cpp/417:Done playing wav file. Sleeping till buffer ends.
2013-12-09 13:26:58.260 Lync[4560:5308] VERBOSE UTILITIES AudioStream.cpp/411:Reached end of wave buffer
2013-12-09 13:26:58.260 Lync[4560:5308] VERBOSE UTILITIES AudioStream.cpp/417:Done playing wav file. Sleeping till buffer ends.
2013-12-09 13:26:58.711 Lync[4560:5288] INFO UTILITIES AudioManager.cpp/75:AudioManager::clearAudioStream called.
2013-12-09 13:26:58.711 Lync[4560:5288] VERBOSE UTILITIES AudioStream.cpp/432:Audio is no longer playing
2013-12-09 13:26:58.712 Lync[4560:5312] INFO UTILITIES AudioManager.cpp/89:AudioManager::clearAudioStream invoked.
2013-12-09 13:26:58.712 Lync[4560:5312] INFO UTILITIES AudioStream.cpp/106:Releasing AudioStream
2013-12-09 13:26:58.763 Lync[4560:5308] INFO UTILITIES AudioManager.cpp/75:AudioManager::clearAudioStream called.
2013-12-09 13:26:58.763 Lync[4560:5308] VERBOSE UTILITIES AudioStream.cpp/432:Audio is no longer playing
2013-12-09 13:26:58.765 Lync[4560:5332] INFO UTILITIES AudioManager.cpp/89:AudioManager::clearAudioStream invoked.
2013-12-09 13:26:58.765 Lync[4560:5332] INFO UTILITIES AudioStream.cpp/106:Releasing AudioStream
2013-12-09 13:27:02.167 Lync[4560:4624] PERFORMANCE TESTPERF CMPerfTrace.cpp/128:[Perf][UI]-PerfBegin: 4:SignOut
2013-12-09 13:27:02.173 Lync[4560:4644] INFO APPLICATION CAlertReporter.cpp/131:Clearing all(1) alerts
2013-12-09 13:27:02.173 Lync[4560:4644] INFO APPLICATION CUcwaAppSession.cpp/497:Called signOut() in state 1
2013-12-09 13:27:02.173 Lync[4560:4644] INFO APPLICATION CAlertReporter.cpp/117:Alert cleared of Category 2, Type 300, cleared 0 alerts
2013-12-09 13:27:02.173 Lync[4560:4644] INFO APPLICATION CAlertReporter.cpp/117:Alert cleared of Category 2, Type 301, cleared 0 alerts
2013-12-09 13:27:02.173 Lync[4560:4644] INFO APPLICATION CAlertReporter.cpp/117:Alert cleared of Category 2, Type 302, cleared 0 alerts
2013-12-09 13:27:02.173 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/566:Timer cancelled. OnResume = 0
2013-12-09 13:27:02.173 Lync[4560:4644] INFO APPLICATION CAlertReporter.cpp/117:Alert cleared of Category 1, Type 201, cleared 0 alerts
2013-12-09 13:27:02.173 Lync[4560:4644] INFO APPLICATION CUcwaAppSession.cpp/975:CUcwaAppSession canceling all requests
2013-12-09 13:27:02.173 Lync[4560:4644] INFO APPLICATION CUcwaAppSession.cpp/998:CUcwaAppSession::setNewActualState() state=0
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component UcwaSession on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component UcwaAutoDiscoverySession on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component JoinLauncherSession on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component EwsSession on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component EwsAutoDiscoverSession on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component HttpFileDownloadSession on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component BrbSession on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component CpsSession on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component WebTicketSession on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component MetaDataManager on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO UTILITIES CWpAppStateQuery.h/102:Clearing keep-alive timer callback
2013-12-09 13:27:02.174 Lync[4560:4644] WARNING APPLICATION CApplicationInformation.cpp/136:Received CAppStateEvent in CApplicationInformation
2013-12-09 13:27:02.174 Lync[4560:4644] INFO APPLICATION CCertificateProvisioningService.cpp/541:Clearing certificate from transport: 4edff623-687f-4443-8ab2-b610b8cfb099
2013-12-09 13:27:02.174 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/566:Timer cancelled. OnResume = 0
2013-12-09 13:27:02.174 Lync[4560:4644] PERFORMANCE TESTPERF CMPerfTrace.cpp/128:[Perf][UCMP]-PerfBegin: 50:ObjectModelPersistencyWriteBatch
2013-12-09 13:27:02.174 Lync[4560:4644] INFO APPLICATION CApplication.cpp/942:CApplication::serialize() called
2013-12-09 13:27:02.208 Lync[4560:4644] PERFORMANCE TESTPERF CMPerfTrace.cpp/128:[Perf][UCMP]-PerfEnd: 50:ObjectModelPersistencyWriteBatch
2013-12-09 13:27:02.208 Lync[4560:4644] INFO APPLICATION CBasePersistableEntity.cpp/179:Storing 1 out-of-sync Object Models took 34ms
2013-12-09 13:27:02.208 Lync[4560:4644] INFO APPLICATION CPresenceSubscription.cpp/792:Removed 0 success records, current size is 0
2013-12-09 13:27:02.215 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.216 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.217 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.218 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.219 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.220 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.221 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.221 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.222 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.223 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.224 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.266 Lync[4560:4600] PERFORMANCE TESTPERF CMPerfTrace.cpp/128:[Perf][UI]-PerfEnd: 4:SignOut
2013-12-09 13:27:04.117 Lync[4560:4644] WARNING APPLICATION CUcwaAppSession.cpp/621:Could not find landing page link for tokenName = pushNotificationSubscription
2013-12-09 13:27:06.793 Lync[4560:4600] VERBOSE APPLICATION NUIAgentCommandChannel.cpp/17:NUIAgentCommandChannel::ChangeAgentLogFile
2013-12-09 13:27:06.793 Lync[4560:4644] VERBOSE APPLICATION CUIAgentCommandChannel.cpp/62:CUIAgentCommandChannel::changeAgentLogFile
Hi
Sorry for the delay in replying. I have tried your suggestions and a Windows Mobile 8 device will still not connect. I have saved the log files and attached them. I can't see what the actual error is!
I have recreated my internal Root CA to include http urls in crl & cdp as this is mentioned as an issue, but this hasn't worked either.
Thanks.

Lync 2013 not syncing conversations with mobile apps

Straight to the point, is there any way to sync conversations started on the pc client with the lync mobile app (iOS, Android..)? I've been doing some research and found that this was to be done on the updated version of the mobile app, but at the moment
we haven't been able to do so.
From what we've experienced, if we are connected on the two devices at the same time (PC and mobile), Lync will take the PC as the default and messages will be delivered to the pc client without any notice to the mobile app even though it's connected too.
So, if I get out of my desk and take the phone with me so that people could reach me through Lync, I'll have to sign off from the pc client so that the messages can be directed to my phone app.
Is there a way for changing this or this is the way it works for now? This happens not only for iPhone but for Android devices too.
Please let me know. Thanks!

Lync Server send IM to the currently most active endpoint.
If the server is unable to determine which state is most active, it sends the message to the endpoint it determines most likely active and waits to see whether the user acknowledges the toast at any location. If the user opens the toast
at an endpoint, the server removes the message from the other endpoints. If an endpoint doesn’t acknowledge the message, the server leaves the message at only one location, the most likely endpoint.
Lisa Zheng
TechNet Community Support

How to Install Ethical wall for Lync 2013

Hello!
So many times I've tried to installed Ethical wall in Lync Front end 2013 Server but I think m doing msticke the step am doing.....So can anyone tell where I'll get right docs to install step by step ethical wall for lync 2013
Yogi

The other competitive solution is from Devcentrics Technologies....
http://devcentrics.com/Home/DCF The product name is DC Stockade with following features;
Enables ethical wall in Lync deployment
Option to chose either users, group or VLAN based e-wall
Allow or block Federated domains
Allow or block PIC domains
Block or mask the profanity words as per compliance policies
Setup alert for violation(s)
Archiving & reporting of violations
User defined custom reports & an advanced dashboard
Options to integrate with SMS and service desk system
Role based access on the application
Easily configurable & web based user interface
Integrated with Active Directory
Auto IM Bot for ethical wall
Regards, DevC | Unified Communications Architect | www.devcentrics.com - A UC Partner

Lync 2013 : two problems 1) quicked off from meeting when presenter change 2) Freeze when leaving first call of day

Similar Messages

Maybe you are looking for