Lync 2013 Unable to scroll

I am unable to scroll (with the mouse wheel) in the contacts list and in the conversations.
Have a Logitech Performance MX mouse, and I have also tried with a generic HP-mouse, but to no avail. I simply cant make use of the wheel in Lync. (everywhere else scrolling works fine)
I have even uninstalled and re-installed Lync, no joy.
It is extremely irritating. Anyone else who have this issue?
(sorry if I posted this in the wrong section, please redirect if needed. :) )

Any chance you use WizMouse or another program that alters the behavior of your scrolling?
I've had this same problem and find it incredibly obnoxious, but just tried disabling WizMouse and, suddenly, scroll wheel works in Lync for the first time!
Unfortunately, since Windows doesn't natively allow target scrolling—and I won't give it up—I guess I'm stuck with the scroll wheel not working unless Microsoft decides to fix Lync. (Or, even better, add a target scrolling feature to the OS!)

Similar Messages

Migration to Lync 2013 - Unable to remove 2010 Edge Server

Hi
We did a migration from Lync 2010 to Lync 2013. Everything worked without any problems. But now we are unable to remove the Lync 2010 Edge Pool. Everything has been done according to
https://technet.microsoft.com/en-us/library/jj205369.aspx “Migration from Lync Server 2010 to Lync Server 2013”.
I am able to remove the 2010 Edge pool, but by trying to publish the topology, I receive the following error: “Error: An error occurred: "System.InvalidOperationException" "Cannot publish topology changes. Call orbit still
exists on one or more deleted application servers."
How can I resolve this error?
Regards
Peter

Hi Peter,
You have to change the Call Park Destination FQDN to the Lync 2013 Pool.
Please check out the following article.
Migrate Call Park application settings
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.

Hi Team,
Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.
Using Exchange 2010 Server and Lync 2010 Server at the back. To the best of my knowledge, this option is only available when using Exchange 2013 rather than Ex 2010.
Can somebody confirm this as I am not 100% sure about it.
Appreciate your help. Thanks
Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pk

Hi,
The photo precedence in Lync 2013 is high-resolution photo from Exchange 2013 -> Photo from web address -> Active Directory photo. The "Edit or Remove Picture" button is available if you integrate Lync Server 2013 with Exchange 2013.
Since you are Lync server 2010 and Exchange 2010, you can choose the following two options:
The thumbnailPhoto attribute on the user's object in Active Directory Domain Services
A URL configured by the user
More details:
http://blogs.technet.com/b/nexthop/archive/2010/11/22/microsoft-lync-2010-photo-experience.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

I have installed 2010 microsoft office 2010 home and business version for my laptop,and i have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this que

I have installed 2010 Microsoft office 2010 home and business version for my laptop,and I have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this issue.
Regards
Raghavendar

Hi Raghavendar,
Generally, when you install Lync 2013 in the computer with Office 2010, a Lync Meeting Add-in will be installed and enabled in Outlook 2010. Please follow these steps to check it:
1. In Outlook, click the File tab, click Options, and then click
Add-Ins.
2. Please take one of the following actions:
If the add-in is in the Inactive Application Add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
COM Add-ins, and then click Go.
b. Click to select the check box next to the add-in, and then click OK.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should be available when you create a new calendar item.
If the add-in is in the Disabled Application add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
Disabled Items, and then click Go.
b. Select the add-in, and then click Enable.
c. Restart Outlook, and then verify that the add-in is displayed in the
Add-ins dialog box.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should now be available when you create a new calendar item.
3. In Event Viewer, view the Application log to see whether an error was logged for Outlook, for Lync 2013, the Lync Meeting Add-in for Microsoft Office 2013.
Thanks,
Winnie Liang
TechNet Community Support

Unable to start Lync 2013 FE service on one of the pooled server, error "The evaluation period for Microsoft Lync Server 2013 has expired"

Team,
Unable to start FE service on one of the FE server, 2 Enterprise lync 2013 pool one FE in each pool, only following error in event vrw,
Log Name: Lync Server
Source: LS Server
Date: 12/30/2013 12:10:55 PM
Event ID: 12290
Task Category: (1000)
Level: Error
Keywords: Classic
User: N/A
Computer: ACS465-BH102.me.ykgw.net
Description:
The evaluation period has expired.
The evaluation period for Microsoft Lync Server 2013 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2013 has expired.
Resolution:
Please upgrade from the evaluation version to the licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Server" />
<EventID Qualifiers="50152">12290</EventID>
<Level>2</Level>
<Task>1000</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:10:55.000000000Z" />
<EventRecordID>73953</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security />
</System>
<EventData>
</EventData>
</Event>
Log Name: System
Source: Schannel
Date: 12/30/2013 12:13:36 PM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:13:36.779033200Z" />
<EventRecordID>83985</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="3668" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Server is already on Full version, ran Reset-CsPoolRegistrarState
for fillrest as wel as serviceret
Followed below as well,
http://social.technet.microsoft.com/Forums/lync/en-US/2a7e27ce-2dea-4e37-91ea-1ed42e110198/issue-updating-from-eval-to-volume-licenses?forum=ocsplanningdeployment
Currently done failover to another pool and users can login,
however i cant get the front end service on this server.Any pointers would be appreciated.
Praveen | MCSE Messaging 2003

rit, the command is not doing the trick since its already full version,
PS C:\Users\lyncadmin> Get-CsServerVersion
Microsoft Lync Server 2013 (5.0.8308.0): Volume license key installed.
only one server in one pool, total two pools.
Lync 2013 is on Win 2008 R2, and the event in system im inclining to since i have tried all,
Log Name: System
Source: Schannel
Date: 12/30/2013 9:26:34 AM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T06:26:34.877077500Z" />
<EventRecordID>64911</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="620" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Praveen | MCSE Messaging 2003

Users are unable to see their own profile photo although everyone else can see it in Lync 2013 client

We have Lync 2013, Exchange 2010 and several AD
servers in mixed mode 2003/2008.
All user are unable to see their own profile photo
either in the main Lync window, in the settings or in a chat although other user can see that their photo is there and displaying. The user experiencing the issue can go open Outlook 2013 client and will see their photo displaying correctly in the file menu
(and elsewhere) here.
I have confirmed this happens with any new users I set up as well. We have gone through a fair amount of troubleshooting with other Lync photo issues and simple fixes such as deleting the SIP cache folder etc proves to be ineffective.
Our Cs-ClientPolicy Global is set to websearchonly.
We have "Replicate this attribute to the Global Catalog" set
for the ThumbnailPhoto attribute in AD.
We are also forcing photos from AD only (or no photo) by setting the following:
"Set-CsClientPolicy -Identity PhotosControl -DisplayPhoto
PhotosFromADOnly"
and finally we are importing the photo in ad using this PS command:
"Import-RecipientDataProperty -Identity "Test User"
-Picture -FileData ([Byte[]]$(Get-Content -Path "C:\pictures\testuser.jpg" -Encoding Byte -ReadCount 0))"
The pictures being uploaded are under 10KB in size.
I have followed many threads and will provide any information I can to help find the problem. Thank you in advance.
EDIT: I have also tried the following but with no success: https://knowledge.zomers.eu/misc/Pages/How-to-fix-your-photo-not-showing-up-in-the-Lync-client.aspx

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Lync 2013 to Exchange 2013 Oauth problem - Error:[OAuthTokenBuilder:GetAppToken] unable to continue building token; no locally configured issuer

Hi,
I am having a problem getting OAuth to work from Exchange 2013 to Lync 2013.
I have read and following the instructions online and cannot see what I am doing wrong.
On the Exchange 2013 server, I get the following error when I run:
Test-OAuthConnectivity -Service EWS -TargetUri
https://exchserver2.domainname.local/ews/ -Mailbox "Jack"
RunspaceId : 920118a3-6ab2-45dc-9b68-de68133de95e
Task : Checking EWS API Call Under Oauth
Detail : The configuration was last successfully loaded at 01/01/0001 00:00:00 UTC. This was 1059263714 minutes
ago.
The token cache is being cleared because "use cached token" was set to false.
Exchange Outbound Oauth Log:
Client request ID: 19ad80f6-7751-429f-aac5-e802105fbbc6
Information:[OAuthCredentials:Authenticate] entering
Information:[OAuthCredentials:Authenticate] challenge from
'https://exchserver2.domainname.local/ews/Exchange.asmx' received: Bearer
client_id="00000002-0000-0ff1-ce00-000000000000",
trusted_issuers="[email protected]",Negotiate,NTLM
Information:[OAuthCredentials:GetToken] client-id: '00000002-0000-0ff1-ce00-000000000000', realm: '',
trusted_issuer: '[email protected]'
Information:[OAuthCredentials:GetToken] start building a token for the user domain 'domainname.co.uk'
Information:[OAuthTokenBuilder:GetAppToken] start building the apptoken
Information:[OAuthTokenBuilder:GetAppToken] checking enabled auth servers
Error:[OAuthTokenBuilder:GetAppToken] unable to continue building token; no locally configured issuer
was in the trusted_issuer list, realm from challenge was also empty. trust_issuers was
[email protected]
Error:The trusted issuers contained the following entries
'[email protected]'. None of them are configured locally.
Exchange Response Details:
HTTP response message:
Exception:
System.Net.WebException: The request was aborted: The request was canceled. --->
Microsoft.Exchange.Security.OAuth.OAuthTokenRequestFailedException: The trusted issuers contained the
following entries '[email protected]'. None of them are
configured locally.
at Microsoft.Exchange.Security.OAuth.OAuthTokenBuilder.GetAppToken(String applicationId, String
destinationHost, String realmFromChallenge, IssuerMetadata[] trustedIssuersFromChallenge, String
userDomain)
at Microsoft.Exchange.Security.OAuth.OAuthTokenBuilder.GetAppWithUserToken(String applicationId,
String destinationHost, String realmFromChallenge, IssuerMetadata[] trustedIssuersFromChallenge, String
userDomain, ClaimProvider claimProvider)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.GetToken(WebRequest webRequest,
HttpAuthenticationChallenge challengeObject)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.Authenticate(String challengeString, WebRequest
webRequest, Boolean preAuthenticate)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.OAuthAuthenticationModule.Authenticate(String
challenge, WebRequest request, ICredentials credentials)
at System.Net.AuthenticationManager.Authenticate(String challenge, WebRequest request, ICredentials
credentials)
at System.Net.AuthenticationState.AttemptAuthenticate(HttpWebRequest httpWebRequest, ICredentials
authInfo)
at System.Net.HttpWebRequest.CheckResubmitForAuth()
at System.Net.HttpWebRequest.CheckResubmit(Exception& e, Boolean& disableUpload)
at System.Net.HttpWebRequest.DoSubmitRequestProcessing(Exception& exception)
at System.Net.HttpWebRequest.ProcessResponse()
at System.Net.HttpWebRequest.SetResponse(CoreResponseData coreResponseData)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.Monitoring.TestOAuthConnectivityHelper.SendExchangeOAuthRequest(ADUser user,
String orgDomain, Uri targetUri, String& diagnosticMessage, Boolean appOnly, Boolean useCachedToken,
Boolean reloadConfig)
ResultType : Error
Identity : Microsoft.Exchange.Security.OAuth.ValidationResultNodeId
IsValid : True
ObjectState : New
It appears to work fine from Lync 2013 to Exchange 2013.
When I run: Test-CsExStorageConnectivity -sipuri [email protected] -Binding Nettcp -Verbose in Lync 2013 I get a successful outcome:
VERBOSE: Successfully opened a connection to storage service at localhost using
binding: NetNamedPipe.
VERBOSE: Create message.
VERBOSE: Execute Exchange Storage Command.
VERBOSE: Processing web storage response for ExCreateItem Success.,
result=Success, activityId=0bbdc565-4a05-4b57-bf95-0c75488a1ef6, reason=.
VERBOSE: Activity tracing:
2015/01/02 19:15:55.616 Autodiscover, send GetUserSettings request,
[email protected], Autodiscover
Uri=https://exchserver2.domainname.local/autodiscover/autodiscover.svc, Web
Proxy=<NULL>
2015/01/02 19:15:55.616 Autodiscover.EWSMA trace,
type=AutodiscoverRequestHttpHeaders, message=<Trace
Tag="AutodiscoverRequestHttpHeaders" Tid="30" Time="2015-01-02 19:15:55Z">
POST /autodiscover/autodiscover.svc HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml
User-Agent: ExchangeServicesClient/15.00.0516.004
</Trace>
2015/01/02 19:15:55.624 Autodiscover.EWSMA trace, type=AutodiscoverRequest,
message=<Trace Tag="AutodiscoverRequest" Tid="30" Time="2015-01-02 19:15:55Z"
Version="15.00.0516.004">
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope
xmlns:a="http://schemas.microsoft.com/exchange/2010/Autodiscover"
xmlns:wsa="http://www.w3.org/2005/08/addressing"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header>
<a:RequestedServerVersion>Exchange2013</a:RequestedServerVersion>
<wsa:Action>http://schemas.microsoft.com/exchange/2010/Autodiscover/Autodiscove
r/GetUserSettings</wsa:Action>
<wsa:To>https://exchserver2.domainname.local/autodiscover/autodiscover.svc</
wsa:To>
</soap:Header>
<soap:Body>
<a:GetUserSettingsRequestMessage
xmlns:a="http://schemas.microsoft.com/exchange/2010/Autodiscover">
<a:Request>
<a:Users>
<a:User>
<a:Mailbox>[email protected]</a:Mailbox>
</a:User>
</a:Users>
<a:RequestedSettings>
<a:Setting>InternalEwsUrl</a:Setting>
<a:Setting>ExternalEwsUrl</a:Setting>
<a:Setting>ExternalEwsVersion</a:Setting>
</a:RequestedSettings>
</a:Request>
</a:GetUserSettingsRequestMessage>
</soap:Body>
</soap:Envelope>
</Trace>
2015/01/02 19:15:55.704 Autodiscover.EWSMA trace,
type=AutodiscoverResponseHttpHeaders, message=<Trace
Tag="AutodiscoverResponseHttpHeaders" Tid="30" Time="2015-01-02 19:15:55Z">
HTTP/1.1 200 OK
Transfer-Encoding: chunked
request-id: 5917d246-64b0-48e2-ad79-f9b6cffb5bea
X-CalculatedBETarget: exchserver2.domainname.local
X-DiagInfo: EXCHSERVER2
X-BEServer: EXCHSERVER2
Cache-Control: private
Content-Type: text/xml; charset=utf-8
Set-Cookie: ClientId=FTFXWUQWWRJVBMNBG; expires=Sat, 02-Jan-2016 19:15:55 GMT;
path=/;
HttpOnly,X-BackEndCookie=actas1(sid:S-1-5-21-3691024758-535552880-811174816-113
5|smtp:[email protected]|upn:[email protected])=u56Lnp2ejJqBx8jIn
sqbxpvSz8rHx9LLzp7O0sbOzcnSzcqcmZqem8aempmcgYHNz87K0s/N0s/Oq87Gxc7KxcrK;
expires=Sun, 01-Feb-2015 19:15:55 GMT; path=/autodiscover; secure; HttpOnly
Server: Microsoft-IIS/8.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
X-FEServer: EXCHSERVER2
Date: Fri, 02 Jan 2015 19:15:55 GMT
</Trace>
2015/01/02 19:15:55.704 Autodiscover.EWSMA trace, type=AutodiscoverResponse,
message=<Trace Tag="AutodiscoverResponse" Tid="30" Time="2015-01-02 19:15:55Z"
Version="15.00.0516.004">
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:a="http://www.w3.org/2005/08/addressing">
<s:Header>
<a:Action
s:mustUnderstand="1">http://schemas.microsoft.com/exchange/2010/Autodiscover/Au
todiscover/GetUserSettingsResponse</a:Action>
<h:ServerVersionInfo
xmlns:h="http://schemas.microsoft.com/exchange/2010/Autodiscover"
xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<h:MajorVersion>15</h:MajorVersion>
<h:MinorVersion>0</h:MinorVersion>
<h:MajorBuildNumber>1044</h:MajorBuildNumber>
<h:MinorBuildNumber>21</h:MinorBuildNumber>
<h:Version>Exchange2013_SP1</h:Version>
</h:ServerVersionInfo>
</s:Header>
<s:Body>
<GetUserSettingsResponseMessage
xmlns="http://schemas.microsoft.com/exchange/2010/Autodiscover">
<Response xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<ErrorCode>NoError</ErrorCode>
<ErrorMessage />
<UserResponses>
<UserResponse>
<ErrorCode>NoError</ErrorCode>
<ErrorMessage>No error.</ErrorMessage>
<RedirectTarget i:nil="true" />
<UserSettingErrors />
<UserSettings>
<UserSetting i:type="StringSetting">
<Name>InternalEwsUrl</Name>
<Value>https://exchserver2.domainname.local/EWS/Exchange.asmx</Value>
</UserSetting>
<UserSetting i:type="StringSetting">
<Name>ExternalEwsUrl</Name>
<Value>https://exchserver2.domainname.co.uk/EWS/Exchange.asmx</Value>
</UserSetting>
<UserSetting i:type="StringSetting">
<Name>ExternalEwsVersion</Name>
<Value>15.00.1044.000</Value>
</UserSetting>
</UserSettings>
</UserResponse>
</UserResponses>
</Response>
</GetUserSettingsResponseMessage>
</s:Body>
</s:Envelope>
</Trace>
2015/01/02 19:15:55.704 Autodiscover, received GetUserSettings response,
duration Ms=88, response=NoError
2015/01/02 19:15:55.706 Lookup user details,
sipUri=sip:[email protected], [email protected],
sid=S-1-5-21-3691024758-535552880-811174816-1135, [email protected],
tenantId=00000000-0000-0000-0000-000000000000
VERBOSE: Items choice type: CreateItemResponseMessage.
VERBOSE: Response message, class: Success, code: NoError.
VERBOSE: Item: Microsoft.Rtc.Internal.Storage.Exchange.Ews.MessageType, Id:
AAMkADAwNWZkZWI0LWM5NGYtNDUxNy05Nzk3LWZhZjRiY2Y4MTU4NwBGAAAAAADLP1MgTEXdQ7zQSlb
qPl++BwBauhRZTfLbTYZ+hBWtK784ANcdmUYqAACSqIurRqgYSZwMhT/IBw89AACnT6G9AAA=,
change key: CQAAABYAAACSqIurRqgYSZwMhT/IBw89AACnip6b, subject: , body: .
VERBOSE: Is command successful: True.
Test passed.
All my certificates on the Exchange 2013 and Lync 2013 servers are from my local CA.
I use APP with the public certificates as my reverse proxy for people connecting from outside the network.
In Lync, the OAuthTokenIssuer certificate created through the Lync deployment wizard is issued to domainname.local (my primary sip domain) and the Subject Alternative names include domainname.co.uk
I then exported this certificate to the Exchange Server and use the Set-AuthConfig to use this certificate for OAuth.
from what I read this was what I was supposed to do.
is this correct?
I have tried so many things I don't know what do to next.
Should the OAuth certificate in exchange be the one exported from Lync?
In Lync, should the OAuthTokenIssuer certificate include the servername or lyncserver.domainname.local or just be domainname.local like it is at the moment?
thank-you
jack

Thomas,
thanks for giving this the time. I have run the Configure-EnterpriseApplication.ps1 script following by remove-PartnerApplication so many times that I was wondering if there are other setting that
Configure-EnterpriseApplication.ps1 creates that aer not removed when you run
remove-PartnerApplication.
is there a way to completely remove everything that is confirmed when you run
Configure-EnterpriseApplication.ps1 so I can run Configure-EnterpriseApplication.ps1 without there being any configurations left from when I previously run that command?
thanks
jack
[PS] C:\Windows\system32>Get-PartnerApplication |fl
RunspaceId : cb2fb328-769d-4b32-8b7b-1fa35e2994f5
Enabled : True
ApplicationIdentifier : 00000004-0000-0ff1-ce00-000000000000
CertificateStrings : {MIIGcDCCBVigAwIBAgITPgAAARIHL+ig32UAAQAAAAABEjANBgkqhkiG9w0BAQUFADBcMRUwEwYKCZIm
iZPyLGQBGRYFbG9jYWwxHTAbBgoJkiaJk/IsZAEZFg1HdWlkZUNsb3RoaW5nMSQwIgYDVQQDExtHdWlkZ
UNsb3RoaW5nLUFQUFNFUlZFUjEtQ0EwHhcNMTUwMTEwMTIxODIzWhcNMTcwMTA5MTIxODIzWjB7MQswCQ
YDVQQGEwJHQjEPMA0GA1UECBMGTG9uZG9uMQ8wDQYDVQQHEwZMb25kb24xHzAdBgNVBAoTFkd1aWRlIEN
sb3RoaW5nIExpbWl0ZWQxCzAJBgNVBAsTAkhRMRwwGgYDVQQDExNHdWlkZUNsb3RoaW5nLmNvLnVrMIIB
IjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAyzDzaLsjJfktsbwIJ998ihsZM/0rKGdIt8rIx00oc
HA7w0uVyz2UqnP9a8uRi6HkA7djbynlmGG0hKSUUQngXxz7q2dY6q9rcY5Rw2mJOMeppounx44FFp4+4e
5HQKviLTYo+3DBGIR0mYDqxanKPS00d0f7HDLvmVb90hjdrbE372JBdcNNHs2OHRqg37bN2fAbwd22c9x
2kvi0rESFnr+KcIGECVInCTHLJ7fwVqvi4hvRqtz7KLZsMXprpgeVDs45EMMRtwJ5Hw8uZR4CFz4dHSlo
dIVgDPn8Ns2vGhcUK0JU4WkDbjnqo1SJzHlqtNjiu//wGcn77PAiM0yhyQIDAQABo4IDCjCCAwYwCwYDV
R0PBAQDAgWgMCEGCSsGAQQBgjcUAgQUHhIAVwBlAGIAUwBlAHIAdgBlAHIwEwYDVR0lBAwwCgYIKwYBBQ
UHAwEwHQYDVR0OBBYEFOY3whPicRAXNsTDSIg3FexpaCKdMHUGA1UdEQRuMGyCH0x5bmNTZXJ2ZXIyLkd
1aWRlQ2xvdGhpbmcuY28udWuCH0x5bmNTZXJ2ZXIyLkd1aWRlQ2xvdGhpbmcubG9jYWyCE0d1aWRlQ2xv
dGhpbmcuY28udWuCE0d1aWRlQ2xvdGhpbmcubG9jYWwwHwYDVR0jBBgwFoAUDHst3gUSMGwvkiNTPavmi
UEWgtQwggEuBgNVHR8EggElMIIBITCCAR2gggEZoIIBFYaBzWxkYXA6Ly8vQ049R3VpZGVDbG90aGluZy
1BUFBTRVJWRVIxLUNBLENOPURvbVNlcnZlcjIsQ049Q0RQLENOPVB1YmxpYyUyMEtleSUyMFNlcnZpY2V
zLENOPVNlcnZpY2VzLENOPUNvbmZpZ3VyYXRpb24sREM9R3VpZGVDbG90aGluZyxEQz1sb2NhbD9jZXJ0
aWZpY2F0ZVJldm9jYXRpb25MaXN0P2Jhc2U/b2JqZWN0Q2xhc3M9Y1JMRGlzdHJpYnV0aW9uUG9pbnSGQ
2h0dHA6Ly9jcmwuZ3VpZGVjbG90aGluZy5sb2NhbC9jcmxkL0d1aWRlQ2xvdGhpbmctQVBQU0VSVkVSMS
1DQS5jcmwwgdUGCCsGAQUFBwEBBIHIMIHFMIHCBggrBgEFBQcwAoaBtWxkYXA6Ly8vQ049R3VpZGVDbG9
0aGluZy1BUFBTRVJWRVIxLUNBLENOPUFJQSxDTj1QdWJsaWMlMjBLZXklMjBTZXJ2aWNlcyxDTj1TZXJ2
aWNlcyxDTj1Db25maWd1cmF0aW9uLERDPUd1aWRlQ2xvdGhpbmcsREM9bG9jYWw/Y0FDZXJ0aWZpY2F0Z
T9iYXNlP29iamVjdENsYXNzPWNlcnRpZmljYXRpb25BdXRob3JpdHkwDQYJKoZIhvcNAQEFBQADggEBAD
87GUPi02czEMO2Op0CeKBBpGwsfjYR9+RlC2uKAoH8PbWAxYNP3Ke6BtPeFy+95GGAJd5Z0+6LpO/AagA
+zeY/tocZQjy0pYaU4/TPZgD+ZB/8sU982msu+8waO316ipBcf/87n9ZW3Jjk5DcVbtwrZErrGRe9DEn8
QArN0jroLfaRtbDumse1Lp76+dxFuVhlLWcUXtIKaxm+UU9DS94EwJMtN54lDm3EG6hVdiGUR7TYqZU0K
HGm7HciIhuO+2rhAazOBiIAAW6wZRUpFKZONSVD6bKrQCzL12LvynQ7XC6Itgr4JGzNCmoN43dXwVCkWo
amTDdZY4h+QBqUvvY=}
AuthMetadataUrl : https://lyncserver2.domainname.local/metadata/json/1
Realm : domainname.local
UseAuthServer : False
AcceptSecurityIdentifierInformation : True
LinkedAccount : domainname.local/Users/LyncEnterprise-ApplicationAccount
IssuerIdentifier :
AppOnlyPermissions :
ActAsPermissions :
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
Name : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
DistinguishedName : CN=LyncEnterprise-786f61476b634278a3c9b9e4ec08b660,CN=Partner
Applications,CN=Auth Configuration,CN=domainname,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domainname,DC=local
Identity : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
Guid : 07495125-ccd4-4443-82d9-74fc3b955cdf
ObjectCategory : domainname.local/Configuration/Schema/ms-Exch-Auth-Partner-Application
ObjectClass : {top, msExchAuthPartnerApplication}
WhenChanged : 10/01/2015 17:14:55
WhenCreated : 10/01/2015 17:14:55
WhenChangedUTC : 10/01/2015 17:14:55
WhenCreatedUTC : 10/01/2015 17:14:55
OrganizationId :
Id : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
OriginatingServer : DomServer2.domainname.local
IsValid : True
ObjectState : Unchanged

Unable to configure monitor & report in Lync 2013

We have SQL Server 2012 in our environment. I want to enable monitor report in Lync 2013. i have separate Lync sql instance.
I am trying to configure new database in Reporting Service Configuration manager in report Server database Configuration wizard.
while testing connection getting below error.
could not connect to server:A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to
allow remote connections.(provider:Named Pipes provider,error:40-could not open a connection to SQL Server)
kindly help to resolve issue.

In my opinion, if you have problem with your firewall, try disabling it and connect. If it doesn't work, means it could be your SQL configuration / enabling of TCP/IP problem.
Check the below blog:
http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/
If you are able to connect to SQL Server by physically logging on to the server, but unable to connect from a client computer then execute the below to check the SPN.
-- run this command to see if SPN is not found
EXEC xp_readerrorlog 0,1,"could not register the Service Principal Name",Null
If the SPN is not found setup and register an SPN. (https://msdn.microsoft.com/en-us/library/ms191153(v=sql.110).aspx#Manual)
Tek-Nerd

Lync 2013 Mobile unable to login from wifi

Dear All,
Many thanks in advance.
My Lync 2013 mobile client is unable to login via internal network.
I have tried to provide external web directory and lyncdiscover by giving way through internal leg of reverseproxy(TMG).
I think I'm missing something from the basic. Will appreciate your reply. :)

You are not missing something basic, this is a real issue with using Lync mobile while on internal corpnet. A known feature (issue) with Lync mobile is that has to connect to the external web services. So when internal it will hairpin out your FW and connect
to the web services:
http://technet.microsoft.com/en-us/library/hh690030.aspx
Some more info:
http://blog.schertz.name/2013/07/understanding-lync-2013-mobility/
A lot of Firewalls do not allow this sort of "hairpinning".
Thom Foreman, MCSE, MCSA, MCTS

Lync 2013. There was a problem connecting with the Exchange. Unable to load the magazine discussions.

Lync 2013. There was a problem connecting with the Exchange. Unable to load the magazine discussions.
Installed Lync Server Standart 2013, client PC MS Office 2013.
As the mail system - Lotus Notes Domino Server and Lotus Notes client, respectively.
Exchange is not installed at all.
question:
1 What is the message: "There was a problem connecting with Exchange. Unable to load the magazine discussions." and how it is fraught?
2 How can I fix this message? Cleaning the C: \ Users \% UserName% \ AppData \ Local \ Microsoft \ Office \ 15.0 \ Lync \ does not help
3 What are the disadvantages when using Lync Server Standart 2013 without Exchange? In principle, I put for Lync Exchange?
4 What are the advantages when using Lync Server Standart 2013 with Exchange?
5 Is it possible to work simultaneously Lync Server Standart 2013 + Exchange + Lotus Notes
Thank you.

1) That sounds like a strange translation. But basically, it wants to connect to Exchange and it's complaining.
2) You can attempt to go to Tools->Options->Personal and set Personal Information Manager to None, and in Lync Management Shell run set-csclientpolicy
http://technet.microsoft.com/en-us/library/gg398300.aspx with the following options:
DisableCalendarPresence $True
DisableEmailComparisonCheck $True
EnableExchangeContactSync $False
There may be more, I've never tried to completely disable Exchange features from Lync.
3) No conferencing plugin for meeting invites, no automatic presence management based upon your calendar, no searching your Outlook contacts for new contacts, no voicemail, no conversation history,no unified contact store, and more:
http://technet.microsoft.com/en-us/library/jj688098.aspx
4) This is just #3 in reverse :)
5) Depends on your goals, but the experience wouldn't be great. You'd want to keep your contacts and calendar in Exchange and your email in Notes. It would be confusing to your users.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Unable to search GAL on Lync 2013 Front End Pool through Lync 2013 client

I'm in the beginning of a 2010 to 2013 migration and I'm currently testing co-existence functionality between pools. I've noticed that users cannot search the GAL from their Lync client after being moved to the 2013 pool.
When trying to access the internal URL https://fepool13.domain.com/abs/handler the user is prompted to login and after three failed attempts, receives "401 - Unauthorized: Access is denied due to invalid credentials. You do not have permission
to view this directory or page using the credentials that you supplied".
Searching withing a Lync 2010 or Lync 2013 client returns no results, but there are no errors as well as nothing in the event logs or tracing folder regarding not being able to search.
The 2010 pool has been in production for a few years now and when accessing its internal ABS URL https://fepool10.domain.com/abs/handler the user is granted access after a successful login.
In the IIS logs there are slightly more detailed 401 error codes, but I’m not sure what to make of them.
The rtcab database appears to have user information and all three front end servers appear to be syncing with active directory. I say the rtcab database appears to have user info because the AbUserEntry table is filled with User ID'd, GUID's and a
bunch of other stuff.
The authentication on 2013 front end servers “internal lync website/abs/handler” is set to 1. Negotiate, 2. Ntlm - which is the same as the 2010 front end servers.
Any ideas?

Hi,
Which step did you do among migration from Lync Server 2010 to Lync Server 2013?
Did you already move CMS from Lync Server 2010 to Lync Server 2013?
Please create a new Lync account on Lync Server 2013 pool and test the issue again.
Please check if User Replication has completed with the help of the link below:
http://technet.microsoft.com/en-us/library/jj204680.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Unable to share files when in a IM convo with multiple people Lync 2013

Hello,
I'm in the middle of a migration from lync server 2010 to lync server 2013. The users I have migrated over to lync 2013 are not able to send/share attachments when in a convo with multiple people.
However, users can send/share files when IM'ing with individual people.
I've been researching this issue for quite some time but still having a problem pinpointing the issue.
Any help would be greatly appreciated.
Thanks.

Hi,
Did the issue also happen between users who still in Lync server 2010 pool?
Did the issue happen internal or external?
Please double check if MCU on Lync 2013 FE server works well, when two participants are connected, the session is essentially peer-to-peer. When three or more participants are connected, the Sharing feature depends on the Front End Server Multi Point Control
Unit (MCU) to provide the sharing stream to all parties.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Lync 2013 Android Client - Intermittently unable to join conference

Hi
I've just finished installing Lync 2013 on our network (single Front End, Single Edge, Reverse Proxy Server and Office Web Apps Server).
Everything works fine currently, with one exception:
When a user tries to join a meeting from the Lync 2013 client on Android (Lollipop), the call generally sits there "connecting..." before it fails to connect with a message of "Can't connect the call".
Sometimes when rejoin is pressed it will connect, but most of the time it fails.
Testing on a Windows Phone client (and Full/Basic Lync 2013 desktop client and Windows 8.1 App) it works every time
Is it possible this is a Lollipop compatibility issue or does Android require something that the other devices and clients don't?
Thanks for any suggestions
Andy

Hi Zahoor
Thanks for the response
Although you suggest it's not a compatibility issue, other devices seem to connect fine on the same account and same wifi, so I'm still tending towards a hardware / os compatibility issue.
I have now tested on a (very old) Samsung Galaxy S (i9000) running Cyanogenmod 11 (KitKat). This works absolutely fine every time.
The device I'm currently seeing issues with is a Nexus 5 running Lollipop.
As I said they're both on the same account and same wifi. Wifi is strong (sitting by the router), internet is a decent speed (150Mbps) and they are external clients.
When I'm back in the office I'll try some other devices to see if they have any problems.I've had a quick look through the logs and couldn't see anything that stood out, but I'll investigate again after seeing if the other devices work.
Cheers
Andy

Unable to connect as a formal agent to a Response Group after Migration to Lync 2013

We are in the process of migrating our Lync 2010 servers to Lync 2013. Everything seems to go well, but problems started to appear after we migrated the Lync 2010 response groups to Lync 2013. Now only those groups with informal agents work. All the groups
with formal agent, when they try select their group through the web page, they all get the error:
You are not a member of any group. For assistance, contact your support team"
Did anyone experience such an issue ?
Thanks,
Antonio

We had this problem with our recent migration of c. 350 response groups, many of which had formal agent groups. The cause appears to be that after the migration, the formal agent registration screen sees both the 'old' and the 'new' formal agent groups of
which the current user is a member and resolves these to only one entry on the registration screen (which is understandable). But the entry seems to be connected to the 'old' and not the 'new' agent group. We were able to verify this by checking in the old
and new pool database (rgsdyn) and seeing that even after the migration the formal agents were signing in to the old pool and not the new one. One solution is to delete the members from the old formal agent groups so that future registrations are forced to
take place in the new pool database. However, if you do this, bear in mind that if you have to back out the migration, you have to restore these.
We were also had to abandon one migration attempt because of another problem where the migration tool does not support the migration of agents who are defined indirectly in the agent group through a mail distribution group.
tags: Move-CsRgsConfiguration ; formal agent groups ; lync2013 ;

Unable to call or receive call from contacts in Lync 2013 in Blackberry 10 OS

Hi,
I have installed apk file of Lync 2013 in my BB 10.
All features are working fine except the call part.
1. When I am making call (as Lync Call), the phone is trying to connect the contact but after two tries the call gets ended without connecting.
2. When someone is calling me thru lync and I am online in my mobile, the call is not coming to me, but a alert is showing as a text ping. Although the contact can hear the calling tune in his lync.
Please help.
Thanks in advance

From My understanding For Blackberry devices only Instant messaging is supported
via Enterprise Bes server product
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph

Lync 2013 Unable to scroll

Similar Messages

Maybe you are looking for