Lync Client 2013 - IM's sent show incorrect Font and text color

No matter what I set text to, either in Options or directly in the IM window, my text goes out in Times New Roman, with the first word in black and subsequent characters in gray. Has anyone else experienced this, and does anyone know how to resolve
it?
Edit: I confirmed that once the server was upgraded to Lync 2013, this issue went away. The only fix in a mixed environment was disabling the LyncHTML process.

Hi,
The issue may be more related to Lync client. Please reinstall Lync and install latest update to test the issue.
http://technet.microsoft.com/en-us/lync/dn146015.aspx
Kent Huang
TechNet Community Support

Similar Messages

Lync clients 2013 fails to show video, but 2010 works ok.

We'v migrated from 2010 to 2013 Lync server. But some Lync clients in remote places are still 2010.
And today I'v discovered that in a conference for 50+ participants but only one speaker (audio, video and presentation) for some reasons no one of 2013 client and WebApp could see a speaker video. I'v first restarted a client, then
a device, but no effect. After 30 minutes we have to start without a video, but some users with 2010 clients wrought that they have a video of the speaker.
I'v installed a Lync 2010 to my test PC, and on the same PC, with the same credentials 2010 client video is ok, and 2013 shows only a video placeholder.
I’v created a test conference, and the same situation repeats with only 4 clients.
Any suggestions ?

Hi,
From your description above, did you mean only 4 special Clients have this issue?
If yes, please try to check the OC firmware, delete Lync user profile and Lync information on Registry, then test he issue again. If the issue persists, please check if the Lync 2013 client update to the latest version.
Lync user profile: %UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
Lync user information on Registry: HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

Disable auto sign in at start-up for Lync client 2013

Hi,
I want to stop the Lync client from signing in automatically at start-up.
Is there a way to do so?
We are using Lync client 2013.
Thanks in advance

Not as far as I am aware (at least on a PC that the user is logged onto their domain account with) . The only option you have is to stop the Lync client from starting up with Windows (see here - explains both options dialog and reg key http://blogs.technet.com/b/rischwen/archive/2013/06/20/lync-2013-client-auto-start-registry-key.aspx)
If it's a shared PC, you can try this: http://allunifiedcom.wordpress.com/2012/04/12/prevent-lync-from-auto-saving-of-credentials-e-g-multi-user-pc/
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I'm trying to share to Media Browser a 20 minute still slide show with music and text. I have tried several times to save at 1080 HD, but just before it's finished, a message box pops up saying "File already open with write permission." What's this mean?

I'm trying to finalize/share to Media Browser a 20 minute still slide show with music and text. I'd like to finalize it 1080 hd and have tried several times, but just before it's finished, a message box pops up saying it can't be done because "File already open with with write permission." What does this mean? All files are closed; this iMovie project is the only thing open. Does it mean one of the song files from iTunes? And should I just settle for saving it as a "large" file, which is what I'm trying right now?
Thanks,
Jamie

Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occours only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
See also this post
https://discussions.apple.com/thread/4434104?tstart=0
Yours Bengt W

How to show HKSCS fonts and Hong Kong Govt fonts in BI publisher reports?

Dear all,
Would anyone please advise how to show HKSCS fonts and Hong Kong Govt fonts in BI publisher reports?
If we choose to use Arial Unicode MS, not all characters are shown properly.
Thanks and Regards,
HY

Hi Ananth,
In our case, some special Chinese characters are supplemented by another font called "Ming ISO 10646" provided by HK government. This font does not cover the common Chinese characters. That means when we show the common Chinese characters, we need to use the fonts "MingLiu" provided by Microsoft. But if we need to show the additional special Chinese characters, we need to use the "Ming ISO10646" font.
In BI Publisher, we create a font set which includes these two fonts. However, when we run the report, it only uses the MingLiu font, but cannot use the Ming ISO10646 font. Pls advise.

Horizontal RSS feed- is it possible to create an RSS feed (showing both pictures and text), that scrolls from left to right rather than top to bottom?

I am trying to create an RSS feed that will scroll from left to right rather than top to bottom as is standard in iWeb. Ideally, I would like to show both images and text. I am actually using iWeb '09. I am not opposed to writing html code if necessary.
Thank you for your help!

Probleme solved without having to change anything in the flash.
The solution was to add a small part in the CSS in HTML
html {
overflow-x: hidden;
overflow-y: auto;
Solve probleme. All browser. VERY usefull to know !

Lync Client 2013 64bit instantly crashes before sign-on || Office 2013 ProPlus 64bit & Windows 8.1 Enterprise 64bit

I have a problem with my Lync Client. It simply crashes before the sing-on with following error appearing in application log:
Faulting application name: lync.exe, version: 15.0.4623.1000, time stamp: 0x53728995
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17055, time stamp: 0x532954fb
Exception code: 0xe06d7363
Fault offset: 0x0000000000005bf8
Faulting process id: 0xc4c
Faulting application start time: 0x01cfa58adb7a455e
Faulting application path: C:\Program Files\Microsoft Office\Office15\lync.exe
Faulting module path: C:\WINDOWS\system32\KERNELBASE.dll
Report Id: 1a57ee5a-117e-11e4-825d-28d244607082
Faulting package full name:
Faulting package-relative application ID:
As the faulting module path is not pointing to a conflicting Bluetooth driver or anything, how to troubleshoot what software is conflicting this?
Needless to say I've done all basic steps; reinstalling the office, updating with all the latest Office & Windows patces, repairing it, tried it with another / empty user account, etc. This is a new machine with clean Windows installation without OEM
crippleware. Before I just uninstall everything but Office from this machine, how do I point a problem resulting a kernelbase.dll faulting?
Only clients "Starting..." screen is showing before the crash.

Please check if Word, Excel work correctly.
Check if Lync 2013 works on other computer installed using the same installation media.
Lisa Zheng
TechNet Community Support

Lync Cliente 2013 I Can´t use IM and crashes the lync

We try to open the IM in lync 2013 client and crahes.
I receive the following error message
Firma con problemas:
Nombre del evento de problema:    BEX
Nombre de la aplicación:                  lync.exe
Versión de la aplicación:                    15.0.4569.1503
Marca de tiempo de la aplicación:   52b0af33
Nombre del módulo con errores:     unknown
Versión del módulo con errores:      0.0.0.0
Marca de tiempo del módulo con errores:    00000000
Desplazamiento de excepción:         01020000
Código de excepción:                        c0000005
Datos de excepción:                           00000008
Versión del sistema operativo:          6.1.7601.2.1.0.256.48
Id. de configuración regional:          6154
Información adicional del problema:
LCID:
3082

Hi,
Did the issue happen only for you or for multiple users?
You can try to logon other Lync client on other computer with your Lync account as a test.
It may cause by the conflicts between the Lync client and some drivers or some third party programs installed on the computer.
Please check if you install Bluetooth utility on your computer? If yes, please remove it and test the issue again.
Please also run Clean Boot to disable thirty party services and then test again:
http://support.microsoft.com/kb/929135
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

How Can I move contact users saved on lync client 2010 to lync client 2013 ?

i did a migration between lync 2013 and lync 2010 everything done ok
now when move the users from the lync 2010 pool to new pool and sign in with my user i couldn't see any contact on my old list
there was DBIMPEXP.exe tool but this tool not exist in lync 2013
i took a backup for all users but how can i restored them to new client
the backup file on lync 2010 is "xml"
and in the lync 2013 is "zip"
thank you all

Please check the following blog.
http://www.shudnow.net/2012/10/09/dbimpexp-exe-functionality-integrated-into-lync-2013-preview-management-shell/
Lync Server 2013 Preview has deprecated the use of DBIMPEXP.exe.
There are now native Lync Mangement Server cmdlets to provide the equivalent.
You can use the command convert-csuserdata to convert between a 2010 XML file provided from DBIMPEXP.exe and a ZIP file provided from Export-CSUserData.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Lync Client 2013 - Redial External Contacts

Envrionment :
Lync Standard Edition with 2 Front Enda dn 1 Edge Server present
AudioCode Gateway acts as the SBC for SIP trunk to the enviornment.
User is saving an external contacts in his outlook contact settings.
Now to reach this contact, he is manually selecting the contact card and clicking more to dial the external contacts number.If the call is successfull or unsuccessful a entry is created in the call logs of Lync client.
Now second time the user is going to his call logs and selecting REDIAL. This time, Lync client is NOT seeing the external contacts phone number and instead of that it is dialing to external contacts email address.
How to change this on group wide settings such a way that redial only takes the phone number and not external email address ?
Thanks & regards
regards

Is this contact in Outlook with an email address?
Please check there is a phone number with the contact.
If there isn’t, the redial won’t show the phone number.
Lisa Zheng
TechNet Community Support

Im having problem in Mail. Sent is showing incorrect date and also not showing sent emails that have been successfully sent. Is it a virus?

Having trouble in MAIL. Running MacOSX(10.6.8) and in MAIL the SENT both doesnt show sent messages( successfully received) and doesnt show correct date sent. Any ideas??

Not sure about the time stamp problem, but the missing "Sent" mails problem is not uncommon. This problem is one that a lot of people have and in my opinion, I think it's a problem with Apple's mail application, nothing at the user's end.
Does this happen only when you include an attachment or does that matter? Also, does it only happen when your outgoing message is delayed a bit? Check your junk/spam folder to see if your sent messages went in there.
This doesn't fix anything, but you might change your e-mail settings so that all new mails are automatically sent Bcc to yourself.
Sometimes the "missing" sent mails are not going in the right folder. I'm sure you probably already know, but in the left-hand column in MAIL, under Mailboxes, there is a second "sent" folder way at the bottom, depending on your other e-mail accounts, such as Yahoo or Gmail). Many people have discovered their missing "sent" e-mails in those.
It is a big hassle, for sure, and has been officially reported. Users with complaints are being told that Apple's Intrusion Detection and Prevention (IDP) systems block the connection from a user's e-mail client when it attempts to store outgoing e-mails, which contain attachments, to the users' sent folder.
This is supposedly due to the Mac OS/Mac Mail sending non-standard or erroneous commands to the server, emulating the activity which would be generated by an attacker attempting to abuse an exploit in the IMAP server. I doubt you are doing anything wrong, so it's just a matter of waiting for them to FIX this annoying issue.

Logviewer 1.14 showing incorrect times, and other issues.

Couple of issues with running LogViewer, wondering if anyone can help.
First, and seems to be the most frustrating, is that the LogViewer screen is showing incorrect times for the events. I am in Mountain Time zone in the US, which is GMT-7. When looking at the log from a web browser, my router is displaying the correct time. The text file that LogViewer saves on the local computer shows the same correct time. The LogViewer screen, however, shows a time 7 hours into the future. IE, if I type out the log from a DOS window, the last event will say something like "Mar 28 1:15:05 2008", but that same event number will be listed on the logviewer screen as "Mar 28 8:15:05" Any ideas on what may be wrong and how to correct it?
Second, all events seem to be grouped exactly 3 minutes apart. I realize this is probably an effect of the router sending the information every three minutes. Anyone know of a way of changing that period?
Hm, just noticed a third, but very minor issue. The text file written has the wrong day of week on it. It's listing Mar 28 2008 as a Wednesday...
Thanks in advance for any advice.
OK, the tech info. I am running LogViewer 1.14 on a Windows XP machine, contacting an WRT55AG with firmware 1.20. The connection is through a Cat 5 cable, not through the wireless.

Couple of issues with running LogViewer, wondering if anyone can help.
First, and seems to be the most frustrating, is that the LogViewer screen is showing incorrect times for the events. I am in Mountain Time zone in the US, which is GMT-7. When looking at the log from a web browser, my router is displaying the correct time. The text file that LogViewer saves on the local computer shows the same correct time. The LogViewer screen, however, shows a time 7 hours into the future. IE, if I type out the log from a DOS window, the last event will say something like "Mar 28 1:15:05 2008", but that same event number will be listed on the logviewer screen as "Mar 28 8:15:05" Any ideas on what may be wrong and how to correct it?
Second, all events seem to be grouped exactly 3 minutes apart. I realize this is probably an effect of the router sending the information every three minutes. Anyone know of a way of changing that period?
Hm, just noticed a third, but very minor issue. The text file written has the wrong day of week on it. It's listing Mar 28 2008 as a Wednesday...
Thanks in advance for any advice.
OK, the tech info. I am running LogViewer 1.14 on a Windows XP machine, contacting an WRT55AG with firmware 1.20. The connection is through a Cat 5 cable, not through the wireless.

How do I get my Blackberry to only show me email and text messages? OS 6.0

I'm in a love/hate relationship with OS 6.0 on a Bold 9650
It is giving me too much information. I only want to see and be notified of email and text messages, but it is now showing me Calendar and Facebook messages and notices.
Can I change the settings and turn off these items? I can't find anything on it.
Thanks!!! SheriGNP
Solved!
Go to Solution.

Facebook messages: Open Facebook > press the Menu key > Options > scroll down to and UNselect the option to integrate Facebook with your Messages application.
For both Facebook and Calendar notifications, go to your profiles and set the notications for these two apps to be silent or no notification.
Untill you learn many of the simple features of the BlackBerry 9650, you will be frustrated.
Here are some resources you might benefit from:
BlackBerry Frequently Asked Questions
BlackBerry 101
BlackBerry Tips and Tricks
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

ISight shows some lines and weird colors in every software and user

Since saturday, the day i got my brand new mac, i've been reading the topics around here. None of them seem to resemble my issue.
On saturday i charged the mac, turned it on and took a picture on Photobooth. Everything was normal until that very same night when i turned it on again and the camera showed some lines and went from normal color to green, then to red. I could see myself but not in proper colors. Got no message of camera in use nor it was undetected.
I let it rest for a while and tested again on Sunday, Monday and today and it's the same thing. It has nothing to do with photobooth effects because 'normal' shows an image with the issue and the lines appear in every effect.
I've already followed all troubleshooting guides and nothing worked (every software and every user has the issue, USB is recognized and SMC restart made no change) I'd love to call the support line but my work schedule keeps me from doing it.
I'd love to show you a picture i took with this issue but i have no idea how to post it around here.
hope i can get some help before giving up and sending it back to the store.
Thanks already!

Welcome to Discussions, alequihdez
You have posted clear explanation of thorough troubleshooting!
Your new Mac almost certainly has a hardware problem.
Return your new Mac to see if the retailer as soon as possible.
If he cannot immediately correct the problem, he may exchange it.
If you bought from Apple on-line:
http://expresslane.apple.com/
- or -
http://support.apple.com/kb/HE57
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Lync Client 2013 not Signing in, But Lync 2010 Do Sign In

Dears,
I have a weird problem, I have installed Lync 2013 FE Server, after I finished installing it I tried to test the log in with the Lync 2013 client, it asked for authentication but everytime I enter the authentication it gives me an error of server is unavailable
now.
I've checked the DNS records, ports and certificate everything is fine, but it doesn't sign in. The weird issue here is that I tried to use a Lync 2010 client and it signed successfully with no error and within 2 seconds!!!
The only thing different in my deployment here is that I've updated the Lync to CU1 before I start the services for the first time and also before requesting and assigning the certificates.
Please do anyone has an idea of why this is happening? I will try tomorrow to uninstall Lync and its databases and start fresh without the CU1.

Hi,
Please check if the Lync 2013 uses the automatical configuration to sign in Lync seve.
Please check the Client version policy in the Lync server control panel. Maybe the client version policy block it with mistake configuration.
Have a test to install the Lync 2013 on other PC then check the issue again.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Sean Xiao
TechNet Community Support

Lync Client 2013 - IM's sent show incorrect Font and text color

Similar Messages

Maybe you are looking for