Lync common area phone (cx 600 and cx 3000) unable to join conference

Hello All,
I am facing an issue with cx 3000 phones.The issue is
When teh cx 3000 phones calls a user X and then calls a user y both on PSTN and then try to conference them the conference works but teh cx 3000 conference phones get kicked off from the conference and the 2 pstn users continue to be in conference.
this happens on my cx 600 phones as well.
But from a lync  client  when i dial 2 PSTn numbers and try conference it works though i have a bad call quality
Any help is appreciated.
Roopesh Raj

Found teh issue to be due to ports blocked between phone subnet and the conf mcu server in my datacenter
Roopesh Raj

Similar Messages

  • Can Lync common area phone request device updates?

    Hi,
    simple question: can a Lync Phone Edition device (LPE, Aries class, Polycom CX500 / CX600 etc.) request device updates, when the phone is hosting a common area phone contact object?
    Fortunately I know the answer: it seems NOT, I see in the system settings that there is an error for the last device update request. However as soon as I login with a normal user account, the device update request status is 200, and the phone gets updated
    under 5 minutes and reboots properly.
    While I know the answer, I would like to get feedback from MS: is this a design defect of the product, a bug in the way common area phone contact object authenticates on the Lync webservices or something else? Other peoples experience is more than welcome!

    Hi,
    You can feedback on the link below:
    http://blogs.technet.com/b/lync/archive/2012/11/01/lync-app-feedback-you-asked-and-here-it-is.aspx
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Lync Common Area Phone automatic sign-in

    Yesterday, there was unexpected network fluctuation and that caused all the common area phone to go offline. Lync conference room physical phones were went offline until each one is manually logged in.
    Please advise, how to make it automated...once the phone reboot or similar network outage?
    Thanks
    Funnyghost

    Hi,
    1.  Please disable Hotdesking in Lync Client Policy then test again.
    2.  Please install KB 2737909, 2737910, 2737911 in the link below:
    http://support2.microsoft.com/kb/2781617
    3.  Please also update to the latest firmware of Lync Phone to check the issue.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Common Area Phone and Call Forwarding

    Hi,
    Is it basicly possible to use Call Forwarding on Common Area Phones without Hot Desking?
    According toTechnet yes.
    http://technet.microsoft.com/en-us/library/gg412807.aspx
    We have a problem with the setup of Common Area Phones.
    All CAP phones have a Voice Policy with Call Forwarding enabled and Firmware 4.0.7577.250. (Hard Reset done)
    But the phone menu does not show the Call Forwarding entry.
    When we log in as a user (Hot Desking) with the same Voice Policy, Call Forwarding is shown and functional.   
    Any ideas?
    Thank you in advanced for any input.
    Cheers.
    Dietmar
    ucready

    Try these (on Lync 2013 SEFAUtil):
    Forward calls to outbound:
    C:\>SEFAUtil.exe /server:theGreatPool.internal.net sip:[email protected] /Verbose /callanswerwaittime:10 /setfwddestination:+3580123456789  /enablefwdnoanswer
    Forward calls to internal user:
    C:\>SEFAUtil.exe /server:theGreatPool.internal.net sip:[email protected] /Verbose /callanswerwaittime:10 /setfwddestination:sip:[email protected]  /enablefwdnoanswer
    Petri

  • Outbound call not working for Common Area Phone

    Hi,
    I have configured Common area phone and i am not able to make the outbound call. I have grant the conference policy. I have grant the voice policy.
    client policy is default
    How to troubleshoot the issue with outbound calls?
    INBOUND call is functioning fine 
    Thanks
    jitender

    You can change the dial plan with my tool :) 
    https://gallery.technet.microsoft.com/Lync-2013-Common-Area-57bc4ff1
    But good call, normalization rules may be off due to default global dial plan.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • How to disable addressbook access for common area phones

    I'm searching for a way to prevent access to the company addressbook for our common area phones. One of these phones is used as a door phone in public area and should not display the contact cards of our employees.
    Many thanks

    Hi,
    Please try to add the msRTCSIP-GroupingID attribute on the Contact for Lync users, then test the issue again.
    The basic premise is you can define groups of users in your organizations and assign them different groupingIds. 
    A groupingId is simply a guid and only users who have the same groupingId may search for each other. 
    To set the groupingId for a user, you must set the value of msRTCSIP-GroupingId in Active Directory.
    More details:
    http://blogs.msdn.com/b/jcalev/archive/2012/06/07/partitioning-lync-address-book-using-msrtcsip-groupingid.aspx
    Here is a similar case may help you:
    https://social.technet.microsoft.com/Forums/en-US/7b7ed0b2-03ea-4dee-b4ec-e9a2fad76109/lync-phone-edition-common-area-phone-disable-contact-search?forum=ocsmanagement
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • No long distance dialing for common area phones

    What's the best method step by step of limiting common area phones to local dialing only and blocking long distance?

    The step by step would be to create a voice policy, pstn usage, and route with those restrictions, then assign it to the common area phones.  Then, assign the voice policy to the phones and test.  What you're attempting to do is actually quite
    common.
    I made a handy tool to assign policies to common area phones if it helps:
    https://gallery.technet.microsoft.com/lync/Lync-2013-Common-Area-57bc4ff1
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Common area phone gets "Unable to access server. Please search later"

    I installed two common area phones, a Polycom CX3000 speaker phone and a Polycom CX500.  When starting to type a phone number the following message appears on the screen of the phone: "Unable to access server.  Please search later". 
    Is there any way to enable the search capability for these phones without connecting the USB cable on the CX3000?  Note that the CX500 doesn't have a USB cable at all.

    Hi,
    Please use the Test-CsPhoneBootstrap commandlet to troubleshoot the issue.
    Please check SRV records as Lync phone cannot utilize manual configuration.
    Please make sure the sign in user has been Enterprise Voice enabled.
    Please double check the steps configuring common area phone:
    http://blog.schertz.name/2011/04/common-area-phone-configuration-in-lync/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • I've tried everything and still am unable to join my own wifi network from my iPhone 4s

    I have an AirPort Extreme running the latest software. I've tried everything and still am unable to join my own wifi network from my iPhone 4s, iPhone 3Gs, iPhone 3G, my girlfriend's iPhone 4. The only devices that will connect to the network are our MacBook Pros and iPads, (1 and 2). I have reset the airport to default settings, I've restored my iPhone, I've even disabled the password. I am still unable to join my open airport extreme wifi network. PLEASE HELP!

    Saying you tried everything isn't helpful. Perhaps describing in detail what you've done would allow people to better assist you.
    If you're ever experiencing strange problems connecting to any wifi point you can always try resetting your network settings on your iPhone itself. This solves the majority of wifi problems.
    To do this go to Settings > General > Reset > Reset Network Settings. This will clear all of your saved wifi hotspots and passwords, and hopefully solve your issue.
    Please try this and respond with your results.

  • Common Area Phone with strict DNS rules in multi pool env.

    Hi There,
    As you know, CommonAreaPhones have the strict DNS rules: pool's FQDN's domain must be the same than phone's SIP address domain is.
    In the DHCP we can set only one pool's FQDN, so does anybody have an idea how to get phones spread between two pools? I do not mean that each subnet have own dedicated configuration.
    Pool's are of course internal, so they are having internal FQDNes. Currently the L2010 is faked on the DHCP as pool.company.com (as the SIP domain is company.com). But now on L2013 we have two pools waiting for the phones.
    Petri

    I don't think you'll have a problem.  The strict DNS naming is more of a SRV/A record issue, which shouldn't pose a problem. 
    http://blog.schertz.name/2013/08/lync-phone-edition-cu7-registration-issues
    And
    http://blog.schertz.name/2010/12/configuring-lync-server-for-phone-edition-devices/
    Edit to add proper credit to Jeff Schertz's incredible articles... I need to be better about giving credit where it's due rather than just posting blind links and trusting people will get it.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications

  • I am a residential appraiser and recently purchased an ipad4 to use for my home inspections.  Some homes are foreclose without power and I am unable to get a good picture without a flash.  Does anyone know of a flash attachment for the ipad4?

    I am a residential appraiser and recently purchased an ipad 4 to use for my home inspections.  Some homes are foreclosed poperties without power and I am unable to get a good interior picture without a flash.  Does anyone know of a flash attachment for the ipad 4? I found a flash attachment for the ipad 2, but it does not work with the ipad 4.

    I'm sorry to hear that.
    I'm not affiliated w/ the developer, just a happy user that gave up fighting the apple podcast app a while ago.  I used to have a bunch of smart playlists in itunes for my podcasts, and come home every day and pathologically synced my phone as soon as I walked in the door, and again before I walked out the door in the morning.
    Since my wife was doing this too, we were fighting over who's turn it was to sync their phone.
    Since I've switched to Downcast, I no longer worry about syncing my phone to itunes at all.  I can go weeks between syncs.
    Setup a "playlist" in downcast (ex., "Commute") and add podcasts to that playlist.  Add another playlist ("walk" or "workout") and add different podcasts to that one. 
    Set podcast priorities on a per-feed basis (ex., high priority for some daily news feeds, medium priority for some favorite podcasts, lower priority for other stuff).  Downcast will play the things in the priority you specify, and within that priority, it will play in date order (oldest to newest).
    Allegedly, it will also sync your play status to other devices, although that is not a feature I currently use and can't vouch for.  It uses apple's iCloud APIs, so to some extent may be limited by what Apple's APIs can do.

  • My wife's i-pad 3 was just downloaded with iOS6 and we're unable to join our wifi network at home.  Can anyone help?

    My wife's i-pad 3 was just downloaded with the latest iOS6 and she's now unable to join our wifi network at home.  Can anyone help?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I reset my settings on my ipad mini and am now unable to join my previous network. Any ideas?

    I have roommates and it's their wi-fi I'm using, but everytime I enter the password I get the "Unable To Join Network" screen.  I read on another forum that maybe I'd need to change the wi-fi frequency, but I'm unsure how to manage that.  Extreme layman here, any ideas?

    You will have to enter the password again because you reset your ipad mini

  • I have an alert on my phone to say i haven't backed up my icloud storage. my phone is locked and i'm unable to use it or turn it off. i haven't paid my latest suscription fee... could this be the reason y??

    My Iphone 4 is coming up with an Icloud Backup alert... i cannot get out of it or do anything even though i am pressing the ok button it still stays there and i can't even turn my phone off. I haven't renewed my subscription as yet but want to but obviously can't get past this alert message. Does anyone have any information or ideas of how i get my phone to work as i cannot even receive calls or do anything with it. Thanks

    Thanks so much Omg Its something as simple as that lol cheers mate!

  • Perviously synced Typekit fonts are missing in document and I'm unable to sync them again

    Hello,
    I synced the files a while ago and they all show as synced in my typekit account, but in the actual Illustrator file they show up missing and when I am trying to sync the missing fonts I get an error that states that I should check in my desktop typekit menu. Where I did check, but it's been stuck with the syncing spinner in the middle for a while now.
    I did restart everything. I logged out and logged back in....I don't know what else to try. Any sugjestions?
    Oh and I did try syncing a new one to see if that would work and that didn't happen either.
    Best, Jezabel

    Hi Jezabel,
    I'm sorry that you ran into trouble with this.  Please try Solutions 5, 6, and 7 from this help page:
    http://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html
    If that doesn't solve the problem, you may also use the "Contact support" link on that page to speak to a support agent and debug the problem further.
    Once the tab in your Creative Cloud application loads correctly again, the fonts should be available to all of your desktop programs.
    Please give that a try, and let me know if you have any other questions.  Best, 
    -- liz

Maybe you are looking for

  • Is this Possible to have Goal Values Based on Universe

    Just as we create metrics based on universe and refresh them to populate pm repository (ci_probe_value tab). Similarly can we have goals getting the values from the universe. Please guide me if this is possible. Instead of having fixed/auto-filled va

  • Renaming attachments on the fly with CFMAIL?

    One feature of our app allows our clients to send email to a specific contact with an attached PDF. This PDF is built from stitched together files in a previous step, so it has a dynamically-built filename. The filename consists of the subject, date,

  • Document date on check stub

    On our check stub the taxdate is used to display the a/p invoice document date on the stub.  when we have a credit appearing on the same check some random date from 2007 is shown.  How can i have the taxdate appear when it is a credit vs. a/p invoice

  • HT201317 my icloud now say applephotostream.exe not working how do i fix this?

    my photo stopped streaming photos to my computer.  My computer says applephotostream.exe not working it say I can go on line for a fix to the problem but it doesn't do any thing when I do this.  I don't know how to fix this.  Can someone please help.

  • Failed to load TemplateStream when called from API, but OK in Workbench

    I am getting a "Failed to load TemplateStream for FormQuery" error when I invoke a simple process using the Java API.  When I invoke the same process from WorkBench it's fine.  I am using the FormsService in ES 8.2 turnkey installation.  The operatio