Lync Control Panel Issue

On all my front end servers (3) lync control panel will not open also I cannot access https://lync.example.xyz/cscp on any of the front end servers. https://localhost/cscp opens fine on the servers though. But on any other machine on
that domain I can go to https://lync.example.xyz/cscp and it opens up no problem. Its just on those front end servers I cannot open the webpage or control panel. Any idea?
Rich

Hi,Rich
Here are some suggestions:
1)Please make sure you didn't type wrong FQDN for the pool name on FE server by mistake
2)Please try to add https://lync.example.xyz/cscp to your Trust sites zone on your FE server.
3)Please verify that if your IE proxy is set or "Automatically detected settings" is set in the internet options,if so please set exclusions to bypass reverse proxy server for
https://lync.example.xyz or turn off it.
4)Please disable IPv6 on FE server and try again to see if it works
5)Here are some other information related,hope these can give you some tips.
http://blogs.technet.com/b/ucedsg/archive/2010/11/15/new-f5-load-balancer-deployment-guide-available-for-lync-server-2010.aspx
http://www.lync-blog.nl/?p=588&lang=en
http://jamesosw.wordpress.com/2012/05/08/lync-server-control-panel-navigation-to-the-webpage-was-cancelled/
http://terenceluk.blogspot.com/2011/01/navigation-to-webpage-was-canceled.html
B/R
Sharon
Sharon Shen
TechNet Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

Similar Messages

Lync control panel and internal web Services

Hi,
In our Lync 2013 deployment for web services we have set override FQDN for internal Web Services asialyncpool.corp.contoso.com and External web services as web.contoso.com. The Control Panel URL has been set to https://admin.contoso.com
When i launch Control panel, in the IE https://admin.contoso.com the control panel opens and but the url get changed to internal web services ie sialyncpool.corp.contoso.com. When i enter https://admin.contoso.com/cscp in the IE it ask for logon
credentials and doen't accept the credentials at all, how many times i may try.

Thanks for the response.
https://admin.contoso.com,
it will redirect to the URL of: https://asialyncpool.corp.contoso.com/cscp -
This is exactly what is happening.
When i use - https://asialyncpool.corp.contoso.com/cscp,
it doesn't accept the credentials, it keep asking for right credentials, when i use Lync control panel, it does accept the credentials.

Cant access lync control panel

i have troubles opening the lync server control panel, when i login using my administrator i get "navigation to the webpage was canceled".
to get the obvious out of the way:
- DNS record for admin already added, pointing at lync FE server
- The user, used for loggin in is member of CSAdministrator
- I am able to ping between the Lync FE and and AD
- IIS https setup, ip:all unassigned port 443,is set to use the lync FE certificate
if any further information is needed please tell me

Hi,
Did you change the simple URL to access Lync server Control Panel? If yes, please make sure you also change for DNS record and certificate. You can run the Enable-CsComputer on each Front End server to register the change.
Please also make sure W3SVC work normally.
You can refer to the link below of “Troubleshooting Lync Server 2013 Control Panel”:
http://technet.microsoft.com/en-us/library/gg195689.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support
you mean the one i set in the lync topology manager? called admin.domain.local ? if so, then no it isnt changed

ICloud Control Panel Issues

I'm having an issue with icloud where when I open the icloud control panel on my PC, the only service that it will allow me to use is Photo Stream. It will not allow me to select Mail, Contacts or Calendars & Tasks. At the top of the panel, it tells me to "Install Outlook to use Mail, Contacts and Calendars." I have Outlook 2007 installed on my PC and I'm running Windows 7.

I'm having an issue with icloud where when I open the icloud control panel on my PC, the only service that it will allow me to use is Photo Stream. It will not allow me to select Mail, Contacts or Calendars & Tasks. At the top of the panel, it tells me to "Install Outlook to use Mail, Contacts and Calendars." I have Outlook 2007 installed on my PC and I'm running Windows 7.

Virtu Control Panel issue with Z68A-GD80

Hello,
I am a reviewer for PC Labs (http://www.pclabs.com.tr) and I've been evaluating the Virtu software for some time now. I have the following problem:
This error shows up whenever I try to start Virtu. If I click Yes, it just pops up again, infinitely. If I press No, Virtu quits.
Yes, I read the Virtu installation guide section
Motherboard BIOS is the latest. I'd been trying the previous ones as well.
As stated in the manual; I first installed Intel HD Graphics 3000 drivers, then added the discrete VGA card, let Windows install the drivers, then installed Virtu
I also tried all possible combinations of driver installation with and without Windows Update - manually installed VGA driver from AMD, let Windows install HD Graphics 3000 driver, etc.
I tried multiple versions of Virtu; from MSI download site, from Virtu directly, etc.
Re-installed Windows and done the same, no luck
Here's the rig:
- MSI Z68A-GD80 motherboard with most recent BIOS update available at the date of this post.
- Intel Core i7-2600K processor
- Radeon HD 6870 discrete card
- 4 GB Kingston DDR3-2000 (also tried with Kingston HyperX DDR3-2133)
- Seagate ST3250410AS & Kingston 120 GB SSD
- Thermaltake Toughpower 875 W PSU
- Windows 7 64 bits with SP1
Any ideas?

Quote from: Jack on 22-August-11, 20:29:33
Done.
Thanks for the extra hand, Jack.
Quote from: Jack on 22-August-11, 20:29:33
Two related questions for clarification:
Which version do you have exactly?
---> http://eu.msi.com/service/search/?kw=Z68A-GD80%20&type=product
... B3 or G3?
Which version is that exactly? (Exact version ID)
The version will be different, depending on the motherboard variant you have.
In addition to that, there are always BETA and Final Releases. In case you are referring to the latest Final Release, an even never BETA Release might already be available which does not appear on the board's product site.
The board is a B3. 7672 Ver. 3.0 exactly. As for the driver & application versions:
- Intel HD Graphics 3000 was tested with drivers from MSI and also from Intel. At the time I started this topic, the installed driver was 12.22.1.64.2361 (8.15.10.2361).
- AMD drivers tested (with Radeon HD 6870) were 11.6, 11.7 and finally, 11.8.
- Virtu software versions tested were: First was from MSI (can't remember the version number right now), 1.2.105, 1.2.106 from LucidLogix
- Motherboard BIOSes tested were: Initial BIOS (2011-04-25 date), 17.1 (7672vH1 ROM, date 2011-05-30) and for the time being, 17.2 (7672vH2 ROM, date 2011-07-18).
Quote from: HU16E on 23-August-11, 03:57:21
In the Virtu Control Panel, 'About' Tab, does the Virtu version appear, or does it say Trial Version?
Added: After reading & following the MSI Software Application Guide v1.3, & using the Virtu drivers off the install disk that came with the mainboard, I had flawless performance using Virtu. My mainboard was shipped with the initial UEFI release (17.0 for a B3). The Lucid Virtu license key was enabled right from the beginning.
The Virtu Control Panel never shows up. When the system boots up and I login to Windows, the error message I mentioned is shown. Clicking "Yes" results in the same error; clicking No quits Virtu. The same happens when I manually start the Virtu Control Panel app.
MSI SW App. Guide and software from the install disk didn't work for me. :( I don't think it's the Virtu license key because Virtu is actually *active*. I do get the Virtu logo on 3DMark Vantage (and possibly other 3D apps registered to Virtu) and get discrete card class results from the benchmark in i-Mode. Besides, I believe Virtu software doesn't mean to say my license key is missing. Please see below.
You could make it, then I'd like to ask you a favor. There should be two files in a LucidLogix folder, located in your User directory:
Code: [Select]
{Your_Drive_Name}:\Users\{Your_UserName}\LucidLogix
The files are lucidloader.ini and userSettings.xml.
Could you post those two? As far as I could deduce, there shouldn't be any personal information in those files. Just general settings and application profiles. The error seems to stem from a disrepancy between these two files. The software seems to look for some "keys" from the XML file (where settins and app. profiles are stored as "keys" like <key>KeyName</key>. I'll attach my files a few minutes later. Check the userSettings file; around the end of the file, you'll see the word "general". My bet is on that one.
Of course, while I quoted HU16E, Jack and anyone else interested is welcome in this discussion.

Lync Server 2010 control panel - Server Error in '/cscp' Application

Hi everyone,
Recently i have installed Lync 2010 with no problem at all. But when i try to open de control panel it sends me this error:
Server Error in '/cscp' Application.
Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.TypeLoadException: Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[TypeLoadException: Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.]
   System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type) +0
   System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName) +153
   System.Type.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase) +63
   System.Web.Compilation.BuildManager.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase) +124
   System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) +76
[ConfigurationErrorsException: Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.]
   System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) +12406256
   System.Web.Configuration.Common.ModulesEntry.SecureGetType(String typeName, String propertyName, ConfigurationElement configElement) +69
   System.Web.Configuration.Common.ModulesEntry..ctor(String name, String typeName, String propertyName, ConfigurationElement configElement) +62
   System.Web.HttpApplication.BuildIntegratedModuleCollection(List`1 moduleList) +299
   System.Web.HttpApplication.GetModuleCollection(IntPtr appContext) +1262
   System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) +133
   System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) +304
   System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) +404
   System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext) +475
[HttpException (0x80004005): Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.]
   System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12599232
   System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
   System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12438981
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.33440
Anyone has any idea what is going on?

To fix your issue, you can refer below link
http://social.technet.microsoft.com/Forums/lync/en-US/14948578-dfaa-4d32-b29d-42ecf576afeb/lync-control-panel-errors
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Lync Server 2010 Control Panel - "navigation to the webpage was canceled"

Hi All,
I just installed Lync Server 2010. The SQL 2008 is installed on a separate box and both servers are on Windows 2008 R2.
However, when I try to start the "Lync Server 2010 Control Panel" i get a blank page with the following message "Navigation to the webpage was canceled"
The Installation had no errors and went well. But I did have one problem in the Topology Builder where is asked to create a File Share and asked for FQDN and File Share. I entered "Server1.domain.com" and File Share "Poolshare" but it did
not like it and error with a red cross saying..
"FQDN Server1.domain.com is already used in this topology"
So in the end I just change it to "Server1" then published and ran the installation sucessfully and all services are started OK
Any idea? could it be that the file share is not using FQDN?
Thanks
ECL

I have reveiwed this topic but have not been able to fing my answer. I am getting the same result when attempting to connect to the Lync Control Panel and the webpage saying "navigation was canceled..". Here are the details, any assistance is greatly
appreciated:
I have an existing OCS 2007 R2 server setup in the domain. My domain is company.CORP. It is a Standard Edition server for IM and Presence only. There is an Edge server as well and I have PIC enabled. My sipinternaltls SRV record to the current SE Front End.
All works great. There is a SIP.company.com record in the domain too. I am standing up LYNC 2010 environment on HyperV and ran topology builder twice because I had to fix a name. (I see in Mac's comment that I need to run step2 again. Why is that?)
My Share is on the HyperV server that is hosting the Front End server but they are completely different servernames. My topology published successfully and create some data in the File Share and the Backend DB was created and populated with tables. The certificates
were successfully applied and all services started right up. The latest version of Silverlight was installed and the server was rebooted. Still the darn White Page with 'Navigation to the webpage was canceled'.
I am able to go into IIS and launch the Control Panel successfully by browsing on the "cscp" directory for the Lync Server Internal Web Site. I can also connect to the Control Panel by using the
httpS://admin.company.com/cscp but I have to put 'cscp ' in the path. I cannot browse AD using the Control Panel to find my TestLyncUser1 account but I can find the account, and successfully enable
the account, using the Lync Management Shell. The account was enables and was able to successfully login to the Lync FE server (manually, since the SRV record point to OCS).
This is where I am stuck. Why won't it launch from the Programs File Tool and why do I have to designate the CSCP in the URL? I am Not sure why I couldn't browse AD successfully in the Control Panel yet I could with Powershell. I will begin troubleshooting
that issue next. Could it be because my sip.company.com record points to a different OCS Pool? Or my SRV internaltls record points to the OCS Pool? Microsoft supports standing up the two environments side-by-side and migrating but maybe I am missing something.
Any ideas anyone?
I want to add that I will be having a FE Pool and have named and published my second FE but I have not installed it. The Pool VIP is created in DNS and only pointing to FE1 right now.

Cannot start Lync Server Control Panel

Hello All,
my lab is as follow:
1 virtual machine W2K8 x86 acting as domani controller
1 virtual machine W2K8 X64 acting as Front End and SQL server (co-located)
Installation runs smoothly I get to the end no red marks no problem.
It's an Enterprise pool with all the relevant A host created for admin sip meet dialin (poolname and hostname of the collocated machine)
_tlsinternal created. The user I tried to gain access to Lync Control Panel with is a member of all CS* security group and RTC*security group.
https://FQDN are in the trusted site of IE and I'm not using proxy in my IE.
I even enabled a couple of accounts via Power Shell and they are able to connect to the lab system (a good sign that everything is up and running)
BUT
I CANNOT ACCESS THE LYNC CONTROL PANEL
Unauthorized: Authorization failed.
The application cannot verify your credentials.
Verify your logon credentials and contact your support team
HEEEEEEEEEEEEEEEEEEELP
Thanks in advance
PS
Same story if I try to access https://admin.FQDN
giuseppe

Hi,
As you stated that you have done with the permissions of CSAdministrator group than I will suggest you that kindly check the event viewer and work on error or even post the event error here because I dont think so that you should not connect with Lync after
successful installation.
For assistance check the steps for installation here please.
Lync Server 2010 Installation step
by step
Regards.
Shafaquat Ali.
M.C.I.T.P Exchange 2007/2010, M.C.I.T.P Windows Server 2008, M.C.T.S OCS Server 2007 R2, URL: http://blog.WhatDoUC.net Phone: +923008210320

Lync Server Control Panel : Insufficient access rights to perform the operation;

Hi team,
I have a strange problem in managing Lync users through control panel. But I can enable/disable and Manage users through power shell. Am getting an error " Insufficient Rights to perform the operations" when i try through control panel
Please can someone help me urgently on tihs. I have all the users in a separate OU from where the RTC and CS groups are available. Is there any issue with the delegation?

Hi,
You will receive this error message when you attempt to manage Lync users who are members of protected admin groups in Active Directory (such as Enterprise Administrators etc.).
Typically I use Lync Management Shell, so don't get this error often as it only occurs in the Control Panel.
Editing the properties of the user object you are attempting to enable / disable in AD, and enabling inheritance on under the security tabs advanced options will also work around the problem, but you may not wish to do this. The inheritance change will revert
itself in 15 minutes or so I believe.
Perhaps someone can advise of an alternate solution through group membership / permissions, but as I don't have the issue often I've not looked into it at any great depth.
Kind regards
Ben
Blog:www.gecko-studio.co.uk/
Twitter:
LinkedIn:
Facebook:
Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you've asked, please mark the thread as answered to aid others when they're looking for solutions to similar problems
or queries.

Microsoft Lync Server 2013 Control Panel "Navigation to the webpage was canceled"

i'm facing this issue on the last 2 days.My Lync server 2013 was seted up a month ago and everything went fine on the installation.
Lync server 2013 on Windows 2008R2 SP1.
I could login to the Control Panel (using domain administrator credentials), create users (including myself) manage clients etc.
i didn't login to Lync server for at least a week, beacause i didin't have any other user to add. When time came to add a new user to Lync, i got this error whenever i try to open Control Panel.
i didn't change anything during this time, so i'm really confused by this.
i've checked everything from the start and all seem to be in place.
i also can't open the admin page from the local host as i get an error
HTTP error 403.4 - Fobidden.
i tried also to create new certificates for Lync server, but issue remains.
Also, any solutions i've read for this problem doesn't work as everything is placed correct as other users suggest.
Can anyone please help me further?
Cheers,
Elias

Ok I had the same problem, I missconfigured the admin simple url in topology builder (TB) which I fixed. Also the default certificate in the FE server did not have a SAN entry for the "admin" simple url (which was an error).
So I corrected the admin address in TB republised it, redid step two on the FE, reissued adn replaced the old cert. The new cert had the corrected admin simple url. Checked IIS on the server and made sure that the internal web server had the
right certificate, restarted IIS.
The default Lync control pannel still did not come up, I rebooted the server, the closest I got was being prompt for my credential which it did not accept.
Finally control pannel came up with https://localhost/cscp but I got prompted becuase of a certificate missmatch:
but it still worked!!! Very very wierd. I have not changed CA servers. I am interested about why this happened....
[email protected] BK
Bob Krangle

Navigation to webpage was canceled when opening Microsoft Lync Server 2010 Control Panel

Ok, yes I know there are many threads with similar titles, but my problem is different in that it doesn't happen every time.
The first time I access the Control Panel I get the error:
"Navigation to the webpage was canceled
What you can try:
Refresh the Page"
Clicking Refresh the Page works, kind of. It brings up the admin console, but I get the spinning lights, which eventually resolves to an error at the top of the page that reads: "An operation failed. Network communication failed. Verify
your connection and try again."
Then if I click to other parts, things seem to be fine for the most part, I sometimes see the Network error, and often it is slow.
Port 443 is running through an HLB and this is setup exactly like my other Lync cluster, which doesn't have this issue. Internal web services URL is lynccontent and points to HLB VIP. Admin redirect is lyncadmin and points to HLB VIP.
Going to the /cscp page of each FE or of the pool from IE works every time, but lyncadmin seems to have the same issue (at least on FE1).
Any thoughts?

Hi,
Could you perform the followings:
Make sure there're no duplicate records in the DNS Servers
Flush your DNS Cache at the Server & Client
Refresh any DNS Cache at the HLB (if any)
When the error appears, right click on the console and provide a screenshot on this
If you suspect that FE1 is the culprit, had you tried turning it off and monitor the situation?
Thanks!
James Ooi MCITP Lync Server 2010 | Blog: http://jamesosw.wordpress.com | Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial
to other community members reading the thread

Lync server 2010 control panel SoapException error

We had a multi-site installation of Lync 2010 up (2 FE servers, 2 back-end SQL servers, 1 director, 1 Group Chat) and running when suddenly (and no one has any explanation of what happened, of course) no one can logon the Control Panel. Those in the
CsAdministrator group are flat out denied (not an RBAC denial) and new users added to the group received a SoapException (CS2001, CS2008) and a long, drawn-out explanation of why it failed:
An operation failed. System.Web.Services.Protocols.SoapException: Server was not able to process request. System.InvalidOperationException: Unable to generate a temporary class (result=1) Error CS2001: source file "c:\windows\temp\xxxx.cs"
could not be found error CS2008: no inputs specified
At the same time, the Group Expansion is also no longer working and the Group Chat Lookup Service refuses to stay running (although I'm not sure this ever worked, given the other issues)... I did find some blogs/articles that mention something
about the permissions on the C:\windows\temp folder for other products (FIM, Visual Studio) but not for Lync. The installation is still in beta testing, so a complete re-do isn't beyond the scope of the install... just something I would rather avoid
if possible.
Suggestion? ideas? questions??
Thanks for the pointers...
Mike

Hi,
Thank you for sharing the information. It is useful for others who may encounter similar issues. You time and effort are appreciated.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Lync 2010 server status shows "Retrieving" in Control Panel

When I open Control Panel on my Lync 2013 FE server, all my 2013 FE servers show a status of normal and a green check mark under replication. For my legacy 2010 server, the status just says Retrieving. Replication with the 2010 is OK. Is this normal? Not
a big deal because we will be decommissioning the 2010 anyway. I don't see any errors in the Lync server log for the 2010.
One thing that is strange though with the 2010 server is I can run setup, Step 2 (Bootstrapper) and it runs fine. Puts a green check mark and says Complete. If I exit and re-run setup, it looks like Step 2 wants to be run again. the green check mark goes
away. CMS has been moved to 2013 about a month ago and everything is fine. Only reason I am keeping the 2010 around is because we are still using the 2010 Edge. Edge is pointing to 2013 FE so I think the 2010 FE is out of the picture completely (no users on
it) but I wanted to keep it around until we stand up a 2013 Edge. 2010 FE is current with cumulative updates.
From the Lync 2010 side, when I open Control Panel, everything looks good. All servers come up green with no issues. Looks like its just the 2013 FE trying to retrieve info from 2010.

Hi Shadowtuck,
the retrieving status you see via the Lync Server 2013 control panel for the Lync Server 2010 front end is normal behaviour
and nothing to be concerenced about, as is the the green tick not showing for step two in the deployment wizard. I have seen this behaviour in all Lync Server 2010 to Lync Server 2013 migrations I have performed for customers. Thanks.
Regards.
http://www.b4z.co.uk

"iCloud Photos is not enabled" on my PC when in the iCloud control panel it is... Why!? And how the holy **** do I fix the issue?

Hello,
On my PC when I try and view photos via the iCloud photo option I am constantly faced with "iCloud Photos is not enabled" even though on the iCloud control panel it is... Why!? And how the holy **** do I fix the issue?
I've deleted and installed, signed out and back in again... Nothing works. Help!! I'm desperate!
Thanks in advance
Rich

Hi adogool,
Please try to perform the steps given in the follwoing article.
http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

Problem in Loading Lync 2010 Control Panel

After installing Lync Group Chat Server on Lync 2010, The control Panel is not opening. As i have installed the Lync 2010 and Group Chat server on same server due to hardware limitations. In IIS Manager 7.0 i can only run one site at the moment . When in
using MGCWebservice i have stopped Lync internal and External Web Sites and started and MGCWebservice. Now tell the solution how i can run both at the same time coz both using https and Port : 443.
I need to run the control panel and MGCwebservice using IIS Manager 7.0 on same server machine.
Need a solution on urgent basis.

Collocating Microsoft Lync Server 2010, Group Chat with any server role is not supported.
You can change the default port for Lync Server internal and external web service.
You need to change it in Lync Topology Builder and run the step 2 with Lync Server Deployment Wizard, the port will changes automatically
in IIS. But each time you access Simple you need to specify the port you used for Lync web service. You may also have trouble by joining a Lync meeting with Lync client.
i recommend you deploy Lync Server Group Chat server on a seperate server. It is supported in a virtualized environment.
Lisa Zheng
TechNet Community Support

Lync Control Panel Issue

Similar Messages

Maybe you are looking for