Lync Delegate Meeting Creation works in OWA but not in Outlook 2010

The environment is Exchange Online and Lync Online.
When users are assigned Delegate rights (either through Outlook OR via Powershell into Exchange Online) they are able to create regular meetings, modify calendar entries per their rights assigned in the calendar they have delegate access to.
However, when they attempt to create a Lync Meeting for the delegate calendar, they get the error that they do not have access. HOWEVER, if they go to OWA, and create an Online Meeting for the delegate, it works perfectly.
The user in question is a delegate for 3 people. For 1 of the 3, the user can create Lync Meetings for the delegate in Outlook with no issues. For the other 2 people, the user gets the no access error. However, the user can create Lync
Meetings for ALL 3 in OWA.
The rights and permissions that the delegate has to the 3 users are the same.
This leads me to believe it is an Outlook client issue and not an Exchange Online or Lync Online issue (the reason being the user can create the meetings in OWA)
Tried to create a new profile for the user, tried the /CLEANPROFILE switch and neither have resolved the problem.
Any ideas?
Thanks,
Tim

Hi,
Since everything works fine on OWA, I agree with you that this seems to be a client problem.
Remove the delegate permission for the user completely on OWA, then regain the permission, re-configure the Outlook Profile to check the result. Please also make sure the permission of the calendars have been granted for the user too.
Since it's client only, I doubt whether background programs are interfering with Outlook, perform a clean boot to test:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support

Similar Messages

2010 to 2013 Public Folder Migration - PF work in OWA but not outlook Client, password prompt?

Hello All,
I have migrated all public folders from Exchange 2010 Sp3 to Exchange 2013 Cu7. You can access the public folders without any problems in OWA.
When trying to access in outlook i will get a password/username prompt. If i enter my details in this it will keep popping up even with the remember me button ticked.
When i check the connection status i see the below the status which is "connecting" is the PF; it will never connect.
I have done:
Reboots
Restart the Microsoft Exchange RPC Client Access service on the Exchange 2013 server
Tried changing the Logon network security in the outlook client which made no difference:
Tried logging into the outlook client as different user which made no difference
What else can i do please?
Help Appreciated!

Hi,
Please check if you have NTLM configured for Outlook Anywhere on your Exchange 2010.
Get-OutlookAnywhere | fl Identity,*auth*
And please check the server the public folder is trying to connect.
Best regards,
Belinda Ma
TechNet Community Support

Read logged in user-works in Delphi7 but not in Delphi 2010

Hi all
I have some code I wrote a while back in Delphi 7 - simple program to read a currently logged in user IDs, read available class definitions, read some user attributes - relatively simple stuff. I am now trying to move to Delphi 2010 and the very same code that works on Delphi 7 does NOT work on Delphi 2010. The code was updated to compile and run on Delphi 2010, so it executes with no errors.
I am using NWDSWhoAmI to get the currently logged in user name and NWDSRead to retrieve user attribute values. On Delphi 7, the code works, all API return "Success" and return correct values. In Delphi 2010, all APIs return "Success" but the code act as if I am not logged in - the username returned is "[Public]" and when I try reading attribute values I get $8884 - RESOLVE SVC FAILED (also may mean I am not authenticated to the NDS tree).
The environment is XP and Novell Client 4.91 on the workstation, NW6.5 on the server (one sever tree). The code runs under the currently logged in user with full admin rights in the tree and Novell Client configuration on both workstations is identical. Any ideas on how to resolve this would be greatly appreciated.
Thanks
Vlad

Vlad,
since both Delphi versions go through the same DLLs it must be a difference
in the code - possibly different variable implementation as 16/32 bit or
signed/unsigned vars
It is good practice to use the NWLibrary defined variable types instead of
native Delphi types.
I have successfully used the same sources in Delphi 4, 5, 6, and 2010
Try my old samples:
http://support.novell.com/techcenter...a20020203.html and my Delphi
version independent Delphi libraries
http://developer.novell.com/wiki/index.php/Delphi-units
Wolfgang
"vladh" <[email protected]> wrote in message
news:[email protected]...
>
> Hi all
> I have some code I wrote a while back in Delphi 7 - simple program to
> read a currently logged in user IDs, read available class definitions,
> read some user attributes - relatively simple stuff. I am now trying to
> move to Delphi 2010 and the very same code that works on Delphi 7 does
> NOT work on Delphi 2010. The code was updated to compile and run on
> Delphi 2010, so it executes with no errors.
> I am using NWDSWhoAmI to get the currently logged in user name and
> NWDSRead to retrieve user attribute values. On Delphi 7, the code works,
> all API return "Success" and return correct values. In Delphi 2010, all
> APIs return "Success" but the code act as if I am not logged in - the
> username returned is "[Public]" and when I try reading attribute values
> I get $8884 - RESOLVE SVC FAILED (also may mean I am not authenticated
> to the NDS tree).
> The environment is XP and Novell Client 4.91 on the workstation, NW6.5
> on the server (one sever tree). The code runs under the currently logged
> in user with full admin rights in the tree and Novell Client
> configuration on both workstations is identical. Any ideas on how to
> resolve this would be greatly appreciated.
> Thanks
> Vlad
>
>
> --
> vladh
> ------------------------------------------------------------------------
> vladh's Profile: http://forums.novell.com/member.php?userid=84546
> View this thread: http://forums.novell.com/showthread.php?t=422167
>

Iphone Calendar Invites sync with OWA but not Entourage

I have a MacBook Air (OS X 10.5.7), iPhone 3g (running os 3.0) and Office 2008. I have Entourage set up and running for email and contacts but it only syncs one-way for calendar - from Entourage/Exchange to iPhone, but not the reverse.
The iPhone syncs with changes made in Entourage/Exchange calendar.
If I create a calendar event on my iPhone, it will show up in OWA, but not in the Entourage calendar. If I accept a calendar invite on the iPhone, it shows up in OWA, but not in Entourage.
If I create an appointment or calendar event in Entourage, it shows up in OWA and the iPhone.
If I create an invite for an event on the iPhone, other participants receive the invite.
The only thing that doesn't work is creating or accepting a calendar event on the iPhone or OWA and seeing it in Entourage. Help! Very frustrated.

On your iPhone, go to settings and then mail,contacts,calendar,etc. Change your default calendar to Entourage.

Custom F4 help in a BSP application working in Mozilla but not in IE

Hi,
I have created a custom F4 help in a BSP application.
It is working in Mozilla but not in IE. I tried enabling javascript as well but still it is not working.
Can someone please suggest a possible solution for this?

Hi,
See simmilar discussion in thread /thread/1883519 [original link is broken]
I think this may be helpful for you.
Thanks,
Chandra

Why does the counter work in MAX, but not Labview?

Please help, I have been away from Labview for over 3 months, and I am quite rusty....
Last year, I successfully configured NI9401 to measure period (seconds) by counting the rising edges of my sensor signal. Since then, I have aquired a new PC, and loaded all my software into it, including the Labview VI's that successfully worked on the old computer.
I can see the digital signal using MAX and the test panel for the NI9401, so, I know my wiring and my TTL signal is OK, but, when I try to run the attached VI, nothing happens except the error below.. How do I tell this VI to look for the signal on MOD3/CTR0 and channel 14?
Thanks. I am sure it is a small adjustment...this worked fine a few months ago...not sure what is wrong now.
Thanks,
Dave
Solved!
Go to Solution.
Attachments:
continuously measure period buffered_singlechannel_forum_feb_23_2012.vi ‏20 KB

OK, now. Resolved the issue. The vi is fine, but, some shaky wires were identified...worked in MAX but not in the vi. Now that the connections have been tightened up, it works for both. Sorry for the inconvenience.
Dave

Works on emulators but not on mobile devices

Hello,
My project works on emulators but not on mobile devices (no image and on Samsung it says "unsupported file").
Please help, I don't know what to do. My configurations: MIDP 2.1, CLDC 1.1.
Thanks in advance.
Edited by: Vitali.pom on Oct 27, 2011 12:01 PM

Edit: I succeeded to solve it accidentally. I did the following: Sign the jar in Netbeans, clean and build, the jar didn't work, I wiped out the .ks from the jar and clean and build again. Now it worked.
Edited by: Vitali.pom on Oct 30, 2011 1:28 AM

Wifi works at home but not when away from home

My Wifi works at home but not when away from home, what is wrong? I thought with a phone plan I didn't need to have a wifi connection.

You either need WiFi or Cellular (or both). If you have neither, you can't connect to the internet.
Most people use WiFi at home and Cellular while away from home, or connect to public WiFi networks where there are some.

Can't FaceTime anymore? iPad states wifi connected and iPhone 4 states not connected? I have wireless in my home? Not sure what happened. Password works for iPad but not on phone?

iPhone won't connect to wifi. iPad is connected. Password working on iPad but not on phone. Can't upload software update of IOS 7.1 because phone not connecting to wifi?

Connect iPhone to computer and open iTunes. You will be prompted to update to iOS 7.0. Keep your phone connected until the update is finished.

My apple id works on itunes but not on my ipod touch, what gives ?

my apple id works on itunes but not on my ipod touch, what gives ?

What are you trying to do on the iPod?
Have you went to Settings>Store and sign out and then sign back in?

Album Art works for most, but not all

I was reading previous forums on the subject, but no clear answer was given..
The album art shows up fine in itunes and my library and works for most of my music on my ipod, but how come some album's art does appear? I have it set manually and select 'Get Info' then 'Artwork' and add it from there, then drag in the finished product to my ipod. I've been doing that and it works fine for most of the albums, but every so often, the album art will not appear on my ipod. Am I doing something wrong? I take them all from the same source (amazon.com) but it makes no sense to me how some randomly don't appear.
I tried deleting the artwork and re-adding it, but nothing happened again. If you could answer why it works for most but not all or how I can get the album art to appear for the ones it will not by re-doing something, it would be appreciated. thanks.

I encountered the same problem in the beginning. When I compared the size of the original images, the working ones seemed to be smaller in general, so I reduced the size of all covers I intended to upload on the pod to 300x300 pixels.
This seemed to work - for 2 days. I bought the pod on friday, had pictures on sunday, but on Monday (after the first time the pod was fully discharged) none were left left.
So I ended searching this forum for related problems...
And decided to join my problem to this entry.

How to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?

how to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?
== This happened ==
Every time Firefox opened
== Always

Check with your web mail service provider for help with that issue.

Medical app from Intuit works in IE, but not Firefox.

Encrypted medical app works in new IE, but not Firefox. Everything works down to the end, and click on "continue" and nothing happens. A tech and I have spent hours on this. Did not work on FF5 or 6. Did not work on old IE, but did on fresh new version with no data files copied in.

If it works in IE but not FF, then it has nothing to do with the mp3s. More likely it's because of the HTML on the page.
To start, page is missing DOCTYPE declaration... a MAJOR problem. The DOCTYPE declares which set of rules the browser will use to display the page. Without it, different browsers go crazy or do not work at all.
http://www.w3schools.com/tags/tag_DOCTYPE.asp
Validate the html code here:
http://validator.w3.org/
You will have to fix all the errors if you want this to work in all browsers.
Best wishes,
Adninjastrator

Flash Player works in Safari but not Internet Explorer 9

I've installed Flash Player 10.3 and it works in Safari but not Internet Explorer 9. When I look in Manage Add-Ins I see Flash Shockwave but not Flash Player. My operating system is Windows Vista Ultimate (32bit). Safari is 5.0.5 and IE 9 is 9.0.8112.16421. I've tried uninstalling and re-installing Flash Player and uninstalling Norton 360. Nothing has worked so far. Can you help?

Thank you for your reply. Shockwave is loaded and enabled.
The files in flash directory are: a folder called FlashPlayerTrust: file, flash10q.ocx: file, FlashInstall.log; file, FlashUtil10q_ActiveX.dll; file, FlashUtil10q_ActiveX.exe, file, install.log.
There is no file: NPSWF32.dll.
When I test the browsers I get no spinning logo in either Safari or IE9. Safari says: missing plug-in, where I think the logo should be. IE-9 says nothing at the same location.
Thanks.

Navigation works in IE but not Firefox or Safari!

Hi guys
Why do my nav links on the hompage work in IE but not in Firefox and Safari? http://www.jasonkieck.com/
Any help would be appreciated

The main reason is you have a <div id="bg_grid"> at the end of your html that is essentially over the top of everything else on your page, including your links. All clicks go to that <div> rather than your links undeneath it. I'm kind of surprised it works in IE to be honest.
You do also have a ton of errors as Gramps points out, but that particular issue is not technically an error, so I have a feeling you could fix the ~100 problems shown by the validator and still have the issue.
You could use z-index to "order the stack" as it were. Changing the z-index attributes for the css of those elements will allow you to change their order, regardless of their location in the html. A higher z-index number, the "closer" it is to the viewer (higher on the stack).
Right now, they are both set to 1, so the one that comes later in the html is on top.
Adding z-index:999 to the menu <div> should do it,

Lync Delegate Meeting Creation works in OWA but not in Outlook 2010

Similar Messages

Maybe you are looking for