Lync Edge Server Service Not Starting

i am having an issue with starting the "Lync Server Audio/Video Edge" service on my lync edge server. when i try to start the service it throws the following error..
"The Lync server audio/video edge service on local computer started and than stopped. some services stop automatically if they are not in use by other services or programs."
than in the event viewer logs there are 2 specific errors i can see that look like the following..
what is stopping me from fixing this right away is that i havent changed anything in my configuration, seems to have broke on its own. i can post more errors i have found in other places as well if needed. any help is greatly appreciated

hey sean, thanks for your response. all things point to something else using port 443 right now.. however from what i can see from a netstat command it doesnt look like anything new is running on it. here is a copy/paste of my most recent netstat command..
Active Connections
  Proto  Local Address          Foreign Address        State           PID
  TCP    0.0.0.0:80             0.0.0.0:0              LISTENING       4
  TCP    0.0.0.0:135            0.0.0.0:0              LISTENING       756
  TCP    0.0.0.0:443            0.0.0.0:0              LISTENING       4
  TCP    0.0.0.0:445            0.0.0.0:0              LISTENING       4
  TCP    0.0.0.0:3389           0.0.0.0:0              LISTENING       2804
  TCP    0.0.0.0:4443           0.0.0.0:0              LISTENING       4
  TCP    0.0.0.0:47001          0.0.0.0:0              LISTENING       4
  TCP    0.0.0.0:49152          0.0.0.0:0              LISTENING       468
  TCP    0.0.0.0:49153          0.0.0.0:0              LISTENING       844
  TCP    0.0.0.0:49154          0.0.0.0:0              LISTENING       896
  TCP    0.0.0.0:49338          0.0.0.0:0              LISTENING       1400
  TCP    0.0.0.0:56483          0.0.0.0:0              LISTENING       572
  TCP    0.0.0.0:56966          0.0.0.0:0              LISTENING       564
  TCP    0.0.0.0:56967          0.0.0.0:0              LISTENING       2824
  TCP    192.100.100.84:139     0.0.0.0:0              LISTENING       4
  TCP    192.100.100.84:444     0.0.0.0:0              LISTENING       1768
  TCP    192.100.100.84:5061    0.0.0.0:0              LISTENING       1908
  TCP    192.100.100.84:5061    68.34.170.246:52296    CLOSE_WAIT      1908
  TCP    192.100.100.84:5061    68.34.170.246:52297    CLOSE_WAIT      1908
  TCP    192.100.100.84:5061    68.34.170.246:53570    CLOSE_WAIT      1908
  TCP    192.100.100.85:5061    0.0.0.0:0              LISTENING       1908
  TCP    192.100.100.85:5062    0.0.0.0:0              LISTENING       1844
  TCP    192.100.100.85:5062    192.100.100.83:53701   ESTABLISHED     1844
  TCP    192.100.100.85:5062    192.100.100.83:53967   ESTABLISHED     1844
  TCP    192.100.100.85:8057    0.0.0.0:0              LISTENING       1768
  TCP    192.100.100.85:8057    192.100.100.83:56612   ESTABLISHED     1768
  TCP    192.100.100.85:8057    192.100.100.83:56617   ESTABLISHED     1768
  TCP    192.100.100.85:8057    192.100.100.83:56618   ESTABLISHED     1768
  TCP    192.100.100.85:8057    192.100.100.83:56619   ESTABLISHED     1768
  TCP    192.100.100.85:8057    192.100.100.83:56620   ESTABLISHED     1768
  TCP    192.100.100.85:8057    192.100.100.83:56628   ESTABLISHED     1768
  TCP    192.100.100.85:8057    192.100.100.83:56629   ESTABLISHED     1768
  TCP    192.100.100.85:8057    192.100.100.83:56670   ESTABLISHED     1768
  TCP    192.100.100.85:57577   192.100.100.146:5357   TIME_WAIT       0
  TCP    192.100.100.85:57579   192.100.100.175:5357   TIME_WAIT       0
  TCP    192.100.100.85:57583   192.100.100.159:5357   TIME_WAIT       0
  TCP    192.100.100.85:57584   192.100.100.147:5357   TIME_WAIT       0
  TCP    192.100.100.85:57585   192.100.100.242:3911   TIME_WAIT       0
  TCP    [::]:80                [::]:0                 LISTENING      
4
  TCP    [::]:135               [::]:0                 LISTENING      
756
  TCP    [::]:443               [::]:0                 LISTENING      
4
  TCP    [::]:445               [::]:0                 LISTENING      
4
  TCP    [::]:3389              [::]:0                 LISTENING      
2804
  TCP    [::]:4443              [::]:0                 LISTENING      
4
  TCP    [::]:47001             [::]:0                 LISTENING      
4
  TCP    [::]:49152             [::]:0                 LISTENING      
468
  TCP    [::]:49153             [::]:0                 LISTENING      
844
  TCP    [::]:49154             [::]:0                 LISTENING      
896
  TCP    [::]:49338             [::]:0                 LISTENING      
1400
  TCP    [::]:56483             [::]:0                 LISTENING      
572
  TCP    [::]:56966             [::]:0                 LISTENING      
564
  TCP    [::]:56967             [::]:0                 LISTENING      
2824
  TCP    [2002:c064:6454::c064:6454]:4443  [2002:c064:6453::c064:6453]:54033  ESTABLISHED     4
  TCP    [2002:c064:6454::c064:6454]:57581  [2002:c064:64ab::c064:64ab]:445  ESTABLISHED     4
  TCP    [2002:c064:6454::c064:6454]:59957  [2002:c064:640c::c064:640c]:445  ESTABLISHED     4
  UDP    0.0.0.0:123            *:*                                   
948
  UDP    0.0.0.0:500            *:*                                   
896
  UDP    0.0.0.0:1434           *:*                                   
1976
  UDP    0.0.0.0:4500           *:*                                   
896
  UDP    0.0.0.0:5355           *:*                                   
140
  UDP    127.0.0.1:51664        *:*                                   
1172
  UDP    127.0.0.1:56155        *:*                                   
2924
  UDP    127.0.0.1:59005        *:*                                   
964
  UDP    127.0.0.1:62503        *:*                                   
1680
  UDP    127.0.0.1:62786        *:*                                   
572
  UDP    127.0.0.1:62788        *:*                                   
140
  UDP    127.0.0.1:64531        *:*                                   
896
  UDP    127.0.0.1:65160        *:*                                   
1844
  UDP    192.100.100.84:137     *:*                                   
4
  UDP    192.100.100.84:138     *:*                                   
4
  UDP    [::]:123               *:*                                   
948
  UDP    [::]:500               *:*                                   
896
  UDP    [::]:1434              *:*                                   
1976
  UDP    [::]:4500              *:*                                   
896
  UDP    [::]:5355              *:*                                   
140

Similar Messages

  • EPMA server service not started

    Hi All,
    I installed Hyperion 11.1.2.2 Essbase, Planning, EPMA, Calculation Manager, FDM and HFM in the single machine in windows server 2008 R2.
    but i am facing two issues.
    1. In services, EPMA Server service not started.
    2. In FDM, I am getting error in connecting to Essbase.
    Error: Unable to retrieve target system data.
    Is any thing, i have to install additionally?
    Regards,
    mady

    Hi,
    In Windows Event Viewer i got this message.
    Log Name: System
    Source: Service Control Manager
    Date: 9/3/2012 12:46:12 AM
    Event ID: 7011
    Task Category: None
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: hyperionepm
    Description:
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Parallels Tools Service service.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7011</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2012-09-03T07:46:12.612304600Z" />
    <EventRecordID>70587</EventRecordID>
    <Correlation />
    <Execution ProcessID="440" ThreadID="16540" />
    <Channel>System</Channel>
    <Computer>hyperionepm</Computer>
    <Security />
    </System>
    <EventData>
    <Data Name="param1">30000</Data>
    <Data Name="param2">Parallels Tools Service</Data>
    </EventData>
    </Event>

  • Report server  service not starting up in report 6i

    I am trying to start report server service in windows 2000 server but it is not starting
    up with following error in event viewer.
    The Oracle Reports Server [arun] service terminated with service-specific error 186.
    Any clue.

    This error generally means there is a problem in the tnsnames.ora file. You are probably missing the needed entry for the Reports Server or the Reports Server name you are using contains special characters.
    More details can be found in Metalink Doc ID# 223807.1

  • Oracle Management Server Service not starting

    OS: windows 2000 Server
    Ora version: 8.1.7
    I have checked all the services are started and database is up but when i am trying to start OMS service "oemctrl start oms" its giving the message..
    ... service could not be started
    ... the service did not return an error.
    please tell me whats the solution.

    I have this problem too. (posted a separate thread on
    this before I read this one, sorry).
    Here is my oms.nohup:
    E:\oracle\ora81\sysman\log>tail -f oms.nohup
    [main][2003-10-9:18:7:57:599] ORA-01017: invalid
    username/password; logon denie
    d
    : ..../....@jdbc:oracle:oci8:@exorabsp
    [main][2003-10-9:18:7:57:599]
    VdbSession.processError: invalid connect string
    VXA-2018 :
    Anmeldung bei OMS-Registrierungsdienst nicht m�glich
    oracle.sysman.vxn.VxnBootstrapException:
    at
    at
    at
    t
    oracle.sysman.vxa.VxaAppServer.startServices(VxaAppSer
    er.java:1353)
    at
    at
    at
    t
    oracle.sysman.vxa.VxaAppServer.main(VxaAppServer.java:
    547)
    Fehler beim Hochfahren von Oracle Management Server.
    Somehow, by reading the responses here - created new repository - I managed to get OMS working again.

  • SQL Server service not starting

    Hi,
      In my environment we have configured SQL server clustering. Currently we are getting the following error and the service is not starting up.
    ERROR: TDSSNIClient initialization failed with error 0x2741, status code 0x1. 

    Hi winoa,
    According to your description, you come across the error that TDSSNIClient initialization failed with error 0x2741. Please help to post the full error message from both SQL Server error log and cluster log for further analysis.
    Based on my research, this issue could happen due to setting up SQL Server failover cluster over different subnets using these three SQL Server versions(SQL Server 2005, SQL Server 2008, or SQL Server 2008 r2), hardware issue, or that disk and network name
    are offline.
    Please pay attention to the points below to troubleshoot your issue.
    •If you set up SQL Server failover cluster over multiple subnets using the versions of SQL Server 2005, SQL Server 2008 or SQL Server 2008 r2, please make all the nodes in the same subnet, since SQL Server multi-subnet failover cluster is not supported among
    those three versions of SQL Server. If possible,  you could  use the later versions (SQL Server 2012 or 2014) for SQL Server multi-subnet failover cluster.
    • Make sure that disk and network name are online.
    Regards,
    Michelle Li

  • EPMA Server service not starting 11.1.2.2

    Service cannot be started. Hyperion.DimensionServer.Interface.Exceptions.EPMAServiceException: Cannot initialize the Session Manager. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.TypeInitializationException: The type initializer for 'Oracle.DataAccess.Client.OracleClientFactory' threw an exception. ---> Oracle.DataAccess.Client.OracleException The provider is not compatible with the version of Oracle client at Oracle.DataAccess.Client.OracleInit.Initialize() --- End of inner exception stack trace --- --- End of inner exception stack trace --- at System.RuntimeFieldHandle.GetValue(Object instance, RuntimeTypeHandle fieldType, RuntimeTypeHandle declaringType, Boolean& domainInitialized) at System.Reflection.RtFieldInfo.InternalGetValue(Object obj, Boolean doVisibilityCheck, Boolean doCheckConsistency) at System.Reflection.RtFieldInfo.GetValue(Object obj) at System.Data.Common.DbProviderFactories.GetFactory(DataRow providerRow
    Please can some one help me?

    You can check the following documents on Oracle support and see if that helps. Seems like the issue is with incompatible version of Provider from the exception --
    1001037 wrote:
    Oracle.DataAccess.Client.OracleException The provider is not compatible with the version of Oracle client at Oracle.DataAccess.Client.OracleInit.Initialize()
    You can check the following documents on Oracle support -
    UPK: "Oracle.DataAccess.Client.OracleException: The provider is not compatible with the version of Oracle Client" DatabaseUpdater Error [ID 1540625.1]
    or
    TROUBLESHOOTING ODP.NET error "The Provider Is Not Compatible With The Version Of Oracle Client" after applying 10.2.0.3 [ID 433459.1]
    Thanks,
    hyperionEPM
    Please mark answers as helpful or correct for others to find them easily.

  • The Lync Server Access Edge service not starting (ipconfig / certificate problem?)

    hey guys,
    I am trying to install lync server 2010 for the first time. After installing everying i have a problem on the edge server, the Lync Server Access Edge services doesn't want to start and is giving specific error:
    The Lync Server Access Edge service terminated with service-specific error %%-2146762480.
    i have searched in the forums, i only read that it might have something to do with the ip config or the certificates, but i have no idea what exactly.
    I have the following servers:
    sql server (domain member)
    Archive server (domain member)
    Monitoring server (domain member)
    and the edge server (not a domain member)
    this edge server has two nics, one with a internal address and one with a public address.
    for the internet side i used an internal AD CA for a certificate, for the external side i used a go daddy certificate.
    does anyone has any idea? i am happy to provide additional information.
    thx, JW

    Hey Tim,
    thanks for helping me. I am using one IP address externally. And if i understand correctly i am using port 443, 444 and 5061 (as suggested automatically by the topology builder)
    internally i used an internal CA and external i used a godaddy multidomein certificate,  as we are planning to use multiple domains on it.  i used the wizard from the setup. i ran a request. In the wizard i see then the follwing Subject names and
    subject alternate names:
    sip.domain1.xx
    webconf.domain1.xx
    and then in the next screen i can check other domains, so i checked also the other domains:
    domain2.xx
    domain3.xx
    domain4.xx
    domain1.xx  (also the first domain is here and i checked it to be sure)
    while i was gathering this information i noticed that the certificate wizard says that the external ede certifciate status = invalid. So there is my problem mostlikely. Although i do not understand why it is invalid.
    So when using 1 ip address externally you will need to change the ports in your topology.
    Under Edge Pools - > Right click your edge pool and click edit, down near the bottom make sure "Enable seperate FQDN and ip address for web etc...) is UNCHECKED.
    the first FQDN, sip.domain.com port 443(TLS), the other 2 for webconf and av just change the port numbers. so when you request your 2 certs the only names will be the pool FQDN and sip.domain and your other sip domains. on your router/gateway open the 3
    ports you selected from Outbound -> Inbound. for your external DNS sip.domain -> external IP address going to your firewall/gateway.
    note that your edge server is not on the domain so you will need to edit your hosts file and add your frontend pool/server internal ip address and FQDN server name.
    When you get "invalid" for the certificate what cert is it? the internal CA or GoDaddy?

  • Any reason not to put Lync Edge server on the same server that runs Web Application Proxy?

    We're currently running Lync 2010 standard server, without an edge server or reverse proxy.  I'm working on migrating to lync 2013 standard server, and would like to add the edge functionality in the process.  I have a Server 2012R2 in the dmz,
    with the web application proxy role installed.  I plan to use that to publish the lync web services.  Is there any reason I shouldn't install the lync edge server on the same computer? 

    It just won't work well as everything will want to bind to port 443 (the reverse proxy and the edge services as well).  On top of all that, it's just not supported.  A new virtual server will save you hours upon hours of frustration and leave you
    with a supported configuration. 
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications

  • Oracle service, Listener and http server does not start automatically

    Hello,
    I have Oracle 9i release 2 installed on Unix HP box if system restart in case of power failure the Oracle service, Listener and http server does not start automatically, is there any ready reference available to check what's wrong is happening(I don't have knowledge of Unix).
    Thanks, Khawar.

    Hi Rajesh,
    Thanks for reply, I will check this link and will be back if facing problem.
    Regards, Khawar.

  • Critical Services Not Starting Automatically & Access to Server occasionally dropping out

    For the last few months we have been trying to resolve an issue where access to files on the server (SBS2011 - running domain services, exchange, etc) get so slow or just unresponsive. Logging onto the server is also not possible till it starts responding
    again.
    We also found that when the server starts, the Netlogon services does not start automatically event though it is set to auto start. There are a number of other services mainly exchange services that do not start as well but it seems this may be due to the
    net service not starting.
    We have re-installed the OS but this does not seem to have fixed the issue. The environment is a mix of the SBS2011 server, two Windows Server 2003 boxes - one running Terminal Services. The other was being used for SAP but no longer in use. The clients
    are mainly XP with a few Windows 7 machines. We are in the process of planning the replacement of the XP machines.

    You re-installed SBS2011? - that seems rather drastic.  Did you maintain your domain or just set it all up again?
    This sounds like a DNS issue but have a look at the event viewer and google/post the Event ID and Source.  Given those two you can start to track down the cause and possible fixes at www.eventid.net.  Just be aware that SBS2011 has a lot of
    "normal" event errors, see http://support.microsoft.com/kb/2483007
    You should also run the SBS best practice analyzer and maybe run the "Fix my network" wizard in the SBS console.  Also make sure SBS is the DHCP server for the network.
    -- Al

  • Hyperion Annotation Server service is starting........could not be started.

    Hi,
    The Hyperion Annotation Server service is starting........
    The Hyperion Annotation Server service could not be started.
    i stopped the services from cmd prompt but it could not be started.
    please any one can help me...............
    Thanks in advance.........

    Hi guys,
    i was find the out one of the solution for this issue......
    1.we need to do place the ip address of the local system in the host file and then we need to start the service.
    or
    2.need plug off the internet connection if it is your local system then restart the services.

  • Problems with SNOM 7XX phones and presence of Lync Edge server

    Hi to all,
    we have this problem, this is the scenario (two Lync 2013 st ed. servers):
    - lync 2013 FE server have internal IP address 172.21.212.XXX with internal gateway 172.21.212.254
    - lync 2013 edge server have two network interface:
    First INTERFACE: 3 IPs in 172.21.30.XXX (Access, web and A/V Edge) for external connection with 172.21.30.254 and internal gateway (IP NAT with public IP)
    Second INTERFACE: IP 172.21.212.XXX for internal connection without gateway
    - snom 7XX (50 phones) are connect to the lync server and all internal call works fine. All phones are in an internal dedicated network 172.21.218.XXX with default gateway 172.21.218.254
    - when making external call with 7XX SNOM phones, the call was routed to Trunk COLT with Lync Mediation server and all works fine.
    - when Lync Mediation server receive a call from our trunk COLT we have this situation:
    All Lync 2013 clients work fine, audio is OK, (network 172.21.216.XXX)
    Polycom CX3000 work fine audio is OK (network 172.21.218.XXX)
    SNOM 710, 720, 760  FW 8.8.2.16 UC series,  phones ring but NO SOUNDS from the phones and after a few seconds "Call failed due to network issues."
    The only way to solve the problem is to disable the connection with Lync Edge server (remove gateway 172.21.30.254)
    BUT this is not the solution because now we have no connection with INTERNET (skype, web conferencing doesen't work without edge gateway)
    Why SNOM phones try to use the EDGE gateway to connect the call? Why doesn't use Lync Mediation server?
    Can you help us to find a solution?
    Thanks
    Aurelio

    Hi,
    Thanks to all for yours support.
    Today, we have done some test (no employee in office today
    J) and we have solved the problems.
    The old implementation have had this configuration:
    - the phone numbers have had a no E.164 format compliant: for all users number, the phone number have had this format TEL:012345XYZW ; EXT=XYZW with the normalization
    rules:
    Starting digits: 01234567
    Length: At least 8 digits
    Digit to remove: 0
    Digit to add: nothing
    Pattern to match ^(01234567\d*)$
    All worked fine with this previous configuration:
    Lync 2010 std with only mediation server function + Lync 2013 std front-end with all the others functions and Lync 2013 std Edge server for external connection with
    Lync client Skype world, BUT we have had disabled in SNOM phones ICE function because if ICE was enabled no voice can we hear from the phones.
    After dismissed Lync 2010 with only a Lync 2013 infrastructure, this configuration don’t permit to use edge server because with ICE enabled or disabled no voice from
    SNOM phones.
    Today we have done this operation:
    Setting in Lync 2013 control panel all number for all users, in E.164 format compliant:
    The phone number now have this format TEL:+39012345XYZW ; EXT=XYZW and we have deleted the previous normalization roles.
    We have added this role for the EXT numbers:
    Name: Routing Interno
    Starting Digits: XY
    Length: Exactly 4 (i.e. XYZW)
    Digit to remove 0
    Digit to add: +39012345
    Pattern to match: ^(XY\d(2))$
    Translation rule: +39012345$1
    Internal extension = checked
    And now all work fine.
    We have solved another problem:
    Lync client 2013 can't find new users:
    all new Lync users are not discovered from Lync 2013 client, probably because this setting is present with Lync 2010:
    PS C:\> Get-CsAddressBookConfiguration
    Identity                  
    : Global
    RunTimeOfDay              
    : 1:30 AM
    KeepDuration              
    : 30
    SynchronizePollingInterval : 00:00:30
    MaxDeltaFileSizePercentage : 20
    UseNormalizationRules     
    : True
    IgnoreGenericRules        
    : False
    EnableFileGeneration      
    : True
    With only Lync 2013 servers we have changed
    IgnoreGenericRules to True
    To set UseNormalizationRules and IgnoreGenericRules to true for Lynk 2013 infrastructure.
    http://technet.microsoft.com/en-us/library/jj205160.aspx
    For us all the problems are SOLVED!
    Aurelio

  • SAP Service Not Starting in BI 7.0

    Hi All,
    Today morning my BI 7.0 server restarted twice automatically, then I started the server in last known good configuration after that when I tried to start the server from SAP MMC it didn't started and when i checked the sap service in services.msc it gives error <b>"Some services stop automatically when they have no work to do"</b>.and didn't get started.
    I found a thread similiar to this problem and following that I used sapstartsrv.exe in usr\sap\SID\......\exe directory. This didn't worked for me and by using this Both the services SAPEP2_00 and SAPEP2_01 got removed from services.msc.
    Now I have installed these service again and now I am at same status as in morning,
    In Event log
    For SAPEP2_00 and SAPEP2_01 the following error are avaliable:
    --Initialization failed. Service not started. [ntservmain.cpp 1269]
    --Unable to change to Directory
    gms40\saploc\EP2\DVEBMGS00\work. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 966]
    If any one have gone through such situation please help me out from this, Its has became too critical for me now.
    Thanks in advance....
    Regards
    Vinay Paul

    Hi
    Service are started now but when I am trying to start the server, it is showing strdbs.cmd, sapcpe.exe in red status "could not be started".
    Regards
    Vinay Paul
    Message was edited by:
            Vinay Paul

  • Remote Desktop Management service not starting. service-specific error: %%2284126209 - Event ID: 7024

    Hi Forum members,
    We have a client that has intermittent issues with RDS on a 2012 R2 server.
    As an overview of the environment, the client has a single VMWare host support 2 x Windows 2012 R2 VMs one is the File/Print/Email server and the 2nd is the RDS server used to allow the client to run MYOB Enterprise. Both servers have the AD DS role and
    DNS roles amongst others.
    The 1st issue is that the RD Connection Broker shows the error: "The server pool does not match the RD Connection Brokers that are in it. and then "1. Cannot connect to any of the specified RD Connection Broker servers".
    The above issue seems to be caused by the RDMS service not starting. When you attempt to start it, the service stops and the error in the title is logged in the "System" event log. Full transcript below:
    Log Name:      System
    Source:        Service Control Manager
    Date:          21/01/2015 4:50:32 PM
    Event ID:      7024
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      intentionally removed.local
    Description:
    The Remote Desktop Management service terminated with the following service-specific error: %%2284126209
    Event Xml:
    <Event xmlns="
      <System>
        <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
        <EventID Qualifiers="49152">7024</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8080000000000000</Keywords>
        <TimeCreated SystemTime="2015-01-21T05:50:32.129949400Z" />
        <EventRecordID>53721</EventRecordID>
        <Correlation />
        <Execution ProcessID="568" ThreadID="12436" />
        <Channel>System</Channel>
        <Computer> intentionally removed.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="param1">Remote Desktop Management</Data>
        <Data Name="param2">%%2284126209</Data>
        <Binary>520044004D0053000000</Binary>
      </EventData>
    </Event>
    In addition in the "Application" event log, the following error is logged:
    Log Name:      Application
    Source:        MSSQL$MICROSOFT##WID
    Date:          21/01/2015 5:24:47 PM
    Event ID:      18456
    Task Category: Logon
    Level:         Information
    Keywords:      Classic,Audit Failure
    User:          NETWORK SERVICE
    Computer:      intentionally removed.local
    Description:
    Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Could not find a login matching the name provided. [CLIENT: <named pipe>]
    Event Xml:
    <Event xmlns="
      <System>
        <Provider Name="MSSQL$MICROSOFT##WID" />
        <EventID Qualifiers="49152">18456</EventID>
        <Level>0</Level>
        <Task>4</Task>
        <Keywords>0x90000000000000</Keywords>
        <TimeCreated SystemTime="2015-01-21T06:24:47.000000000Z" />
        <EventRecordID>4228336</EventRecordID>
        <Channel>Application</Channel>
        <Computer>intentionally removed.local</Computer>
        <Security UserID="S-1-5-20" />
      </System>
      <EventData>
        <Data>NT AUTHORITY\NETWORK SERVICE</Data>
        <Data> Reason: Could not find a login matching the name provided.</Data>
        <Data> [CLIENT: &lt;named pipe&gt;]</Data>
        <Binary>184800000E0000001F00000055004E0047004500520045005200410055005300530056005200300033005C004D004900430052004F0053004F0046005400230023005700490044000000070000006D00610073007400650072000000</Binary>
      </EventData>
    </Event>
    I have been attempting to resolve these errors for some time, without success. I have read the many KBs and forum entries related to the above and applied a number of the suggested fixes, including the one which suggests to add the NT SERVICE\ALL SERVICES
    to the "Logon as a Service" in the "User Rights Assignment" of the "Default Domain Policy" which is linked to the domain level, that both servers are objects of.
    My question to the forum is, can anyone come up with a solution to resolve the above issues and all the RDMS service to start which will then hopefully resolve the broker error?
    Regards,
    David West.

    Hi David,
    If virtual machines on the server are Windows Server 2012, then it is not supported to install Remote Desktop Connection Broker on a Domain Controller.
    More information for you:
    Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012
    http://support.microsoft.com/kb/2799605/de
    Guidelines for installing the Remote Desktop Session Host role service on a computer running Windows Server 2012 without the Remote Desktop Connection Broker role service
    http://support.microsoft.com/kb/2833839
    If the VMs are Windows Server 2012 R2, I suggest you install RDS on a separate machine to see if the issue persists.
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • The Sun Java System Application Server could not start

    Hello All,
    I downloaded the Java Pet Store example from sun's website and followed the instructions for installation. After successful installation, I tried to deploy the project and gave the following error
    C:\Documents and Settings\sina\My Documents\Projects\services\nbproject\build-impl.xml:194: Deployment error:
    The Sun Java System Application Server could not start.
    More information about the cause is in the Server log file.
    Possible reasons include:
    - IDE timeout: refresh the server node to see if it's running now.
    - Port conflicts. (use netstat -a to detect possible port numbers already used by the operating system.)
    - Incorrect server configuration (domain.xml to be corrected manually)
    - Corrupted Deployed Applications preventing the server to start.(This can be seen in the server.log file. In this case, domain.xml needs to be modified).
    - Invalid installation location.
    See the server log for details.
    BUILD FAILED (total time: 5 minutes 20 seconds)
    The link above points to the following line in the build-impl.xml file
    <nbdeploy debugmode="false" forceRedeploy="${forceRedeploy}" clientUrlPart="${client.urlPart}" clientModuleUri="${client.module.uri}"/>
    Can any one help whats wrong.An early response will be highly appreciated.
    Kind Regards.
    Hasnain Javed.

    Hi,
    Maybe you already got this fix but here is a suggestion, a snippet from the readme index,html of the petstore download
    # Start the Sun Java System Application Server and the JavaDB database. To do so, open a command prompt and change directory to <javaeesdk.home>/bin and issue the following commands:
    asadmin start-database
    asadmin start-domain
    # Change directory to <petstore.home> and enter the following commands
    ant setup
    ant run
    This will setup, build and deploy the petstore on the application server, and then launch the application homepage in your default browser.
    The "ant setup" that you run from <petstore.home> (petstore.home is the directory where petstore is installed or where you unzipped it) will populate the database wth data and setup the proper database tables etc that are used by the application.
    hth,
    Sean

Maybe you are looking for